| /* |
| * Generic platform device PATA driver |
| * |
| * Copyright (C) 2006 - 2007 Paul Mundt |
| * |
| * Based on pata_pcmcia: |
| * |
| * Copyright 2005-2006 Red Hat Inc, all rights reserved. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/blkdev.h> |
| #include <scsi/scsi_host.h> |
| #include <linux/ata.h> |
| #include <linux/libata.h> |
| #include <linux/platform_device.h> |
| #include <linux/ata_platform.h> |
| |
| #define DRV_NAME "pata_platform" |
| #define DRV_VERSION "1.2" |
| |
| static int pio_mask = 1; |
| module_param(pio_mask, int, 0); |
| MODULE_PARM_DESC(pio_mask, "PIO modes supported, mode 0 only by default"); |
| |
| /* |
| * Provide our own set_mode() as we don't want to change anything that has |
| * already been configured.. |
| */ |
| static int pata_platform_set_mode(struct ata_link *link, struct ata_device **unused) |
| { |
| struct ata_device *dev; |
| |
| ata_for_each_dev(dev, link, ENABLED) { |
| /* We don't really care */ |
| dev->pio_mode = dev->xfer_mode = XFER_PIO_0; |
| dev->xfer_shift = ATA_SHIFT_PIO; |
| dev->flags |= ATA_DFLAG_PIO; |
| ata_dev_info(dev, "configured for PIO\n"); |
| } |
| return 0; |
| } |
| |
| static struct scsi_host_template pata_platform_sht = { |
| ATA_PIO_SHT(DRV_NAME), |
| }; |
| |
| static void pata_platform_setup_port(struct ata_ioports *ioaddr, |
| unsigned int shift) |
| { |
| /* Fixup the port shift for platforms that need it */ |
| ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << shift); |
| ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << shift); |
| ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << shift); |
| ioaddr->nsect_addr = ioaddr->cmd_addr + (ATA_REG_NSECT << shift); |
| ioaddr->lbal_addr = ioaddr->cmd_addr + (ATA_REG_LBAL << shift); |
| ioaddr->lbam_addr = ioaddr->cmd_addr + (ATA_REG_LBAM << shift); |
| ioaddr->lbah_addr = ioaddr->cmd_addr + (ATA_REG_LBAH << shift); |
| ioaddr->device_addr = ioaddr->cmd_addr + (ATA_REG_DEVICE << shift); |
| ioaddr->status_addr = ioaddr->cmd_addr + (ATA_REG_STATUS << shift); |
| ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << shift); |
| } |
| |
| /** |
| * __pata_platform_probe - attach a platform interface |
| * @dev: device |
| * @io_res: Resource representing I/O base |
| * @ctl_res: Resource representing CTL base |
| * @irq_res: Resource representing IRQ and its flags |
| * @ioport_shift: I/O port shift |
| * @__pio_mask: PIO mask |
| * @sht: scsi_host_template to use when registering |
| * @use16bit: Flag to indicate 16-bit IO instead of 32-bit |
| * |
| * Register a platform bus IDE interface. Such interfaces are PIO and we |
| * assume do not support IRQ sharing. |
| * |
| * Platform devices are expected to contain at least 2 resources per port: |
| * |
| * - I/O Base (IORESOURCE_IO or IORESOURCE_MEM) |
| * - CTL Base (IORESOURCE_IO or IORESOURCE_MEM) |
| * |
| * and optionally: |
| * |
| * - IRQ (IORESOURCE_IRQ) |
| * |
| * If the base resources are both mem types, the ioremap() is handled |
| * here. For IORESOURCE_IO, it's assumed that there's no remapping |
| * necessary. |
| * |
| * If no IRQ resource is present, PIO polling mode is used instead. |
| */ |
| int __pata_platform_probe(struct device *dev, struct resource *io_res, |
| struct resource *ctl_res, struct resource *irq_res, |
| unsigned int ioport_shift, int __pio_mask, |
| struct scsi_host_template *sht, bool use16bit) |
| { |
| struct ata_host *host; |
| struct ata_port *ap; |
| unsigned int mmio; |
| int irq = 0; |
| int irq_flags = 0; |
| |
| /* |
| * Check for MMIO |
| */ |
| mmio = (( io_res->flags == IORESOURCE_MEM) && |
| (ctl_res->flags == IORESOURCE_MEM)); |
| |
| /* |
| * And the IRQ |
| */ |
| if (irq_res && irq_res->start > 0) { |
| irq = irq_res->start; |
| irq_flags = (irq_res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED; |
| } |
| |
| /* |
| * Now that that's out of the way, wire up the port.. |
| */ |
| host = ata_host_alloc(dev, 1); |
| if (!host) |
| return -ENOMEM; |
| ap = host->ports[0]; |
| |
| ap->ops = devm_kzalloc(dev, sizeof(*ap->ops), GFP_KERNEL); |
| ap->ops->inherits = &ata_sff_port_ops; |
| ap->ops->cable_detect = ata_cable_unknown; |
| ap->ops->set_mode = pata_platform_set_mode; |
| if (use16bit) |
| ap->ops->sff_data_xfer = ata_sff_data_xfer; |
| else |
| ap->ops->sff_data_xfer = ata_sff_data_xfer32; |
| |
| ap->pio_mask = __pio_mask; |
| ap->flags |= ATA_FLAG_SLAVE_POSS; |
| |
| /* |
| * Use polling mode if there's no IRQ |
| */ |
| if (!irq) { |
| ap->flags |= ATA_FLAG_PIO_POLLING; |
| ata_port_desc(ap, "no IRQ, using PIO polling"); |
| } |
| |
| /* |
| * Handle the MMIO case |
| */ |
| if (mmio) { |
| ap->ioaddr.cmd_addr = devm_ioremap(dev, io_res->start, |
| resource_size(io_res)); |
| ap->ioaddr.ctl_addr = devm_ioremap(dev, ctl_res->start, |
| resource_size(ctl_res)); |
| } else { |
| ap->ioaddr.cmd_addr = devm_ioport_map(dev, io_res->start, |
| resource_size(io_res)); |
| ap->ioaddr.ctl_addr = devm_ioport_map(dev, ctl_res->start, |
| resource_size(ctl_res)); |
| } |
| if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) { |
| dev_err(dev, "failed to map IO/CTL base\n"); |
| return -ENOMEM; |
| } |
| |
| ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr; |
| |
| pata_platform_setup_port(&ap->ioaddr, ioport_shift); |
| |
| ata_port_desc(ap, "%s cmd 0x%llx ctl 0x%llx", mmio ? "mmio" : "ioport", |
| (unsigned long long)io_res->start, |
| (unsigned long long)ctl_res->start); |
| |
| /* activate */ |
| return ata_host_activate(host, irq, irq ? ata_sff_interrupt : NULL, |
| irq_flags, sht); |
| } |
| EXPORT_SYMBOL_GPL(__pata_platform_probe); |
| |
| static int pata_platform_probe(struct platform_device *pdev) |
| { |
| struct resource *io_res; |
| struct resource *ctl_res; |
| struct resource *irq_res; |
| struct pata_platform_info *pp_info = dev_get_platdata(&pdev->dev); |
| |
| /* |
| * Simple resource validation .. |
| */ |
| if ((pdev->num_resources != 3) && (pdev->num_resources != 2)) { |
| dev_err(&pdev->dev, "invalid number of resources\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Get the I/O base first |
| */ |
| io_res = platform_get_resource(pdev, IORESOURCE_IO, 0); |
| if (io_res == NULL) { |
| io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (unlikely(io_res == NULL)) |
| return -EINVAL; |
| } |
| |
| /* |
| * Then the CTL base |
| */ |
| ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 1); |
| if (ctl_res == NULL) { |
| ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (unlikely(ctl_res == NULL)) |
| return -EINVAL; |
| } |
| |
| /* |
| * And the IRQ |
| */ |
| irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| |
| return __pata_platform_probe(&pdev->dev, io_res, ctl_res, irq_res, |
| pp_info ? pp_info->ioport_shift : 0, |
| pio_mask, &pata_platform_sht, false); |
| } |
| |
| static struct platform_driver pata_platform_driver = { |
| .probe = pata_platform_probe, |
| .remove = ata_platform_remove_one, |
| .driver = { |
| .name = DRV_NAME, |
| }, |
| }; |
| |
| module_platform_driver(pata_platform_driver); |
| |
| MODULE_AUTHOR("Paul Mundt"); |
| MODULE_DESCRIPTION("low-level driver for platform device ATA"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(DRV_VERSION); |
| MODULE_ALIAS("platform:" DRV_NAME); |