| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * omap-ocp2scp.c - transform ocp interface protocol to scp protocol |
| * |
| * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com |
| * Author: Kishon Vijay Abraham I <kishon@ti.com> |
| */ |
| |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/err.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| |
| #define OCP2SCP_TIMING 0x18 |
| #define SYNC2_MASK 0xf |
| |
| static int ocp2scp_remove_devices(struct device *dev, void *c) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| |
| platform_device_unregister(pdev); |
| |
| return 0; |
| } |
| |
| static int omap_ocp2scp_probe(struct platform_device *pdev) |
| { |
| int ret; |
| u32 reg; |
| void __iomem *regs; |
| struct resource *res; |
| struct device_node *np = pdev->dev.of_node; |
| |
| if (np) { |
| ret = of_platform_populate(np, NULL, NULL, &pdev->dev); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "failed to add resources for ocp2scp child\n"); |
| goto err0; |
| } |
| } |
| |
| pm_runtime_enable(&pdev->dev); |
| /* |
| * As per AM572x TRM: http://www.ti.com/lit/ug/spruhz6/spruhz6.pdf |
| * under section 26.3.2.2, table 26-26 OCP2SCP TIMING Caution; |
| * As per OMAP4430 TRM: http://www.ti.com/lit/ug/swpu231ap/swpu231ap.pdf |
| * under section 23.12.6.2.2 , Table 23-1213 OCP2SCP TIMING Caution; |
| * As per OMAP4460 TRM: http://www.ti.com/lit/ug/swpu235ab/swpu235ab.pdf |
| * under section 23.12.6.2.2, Table 23-1213 OCP2SCP TIMING Caution; |
| * As per OMAP543x TRM http://www.ti.com/lit/pdf/swpu249 |
| * under section 27.3.2.2, Table 27-27 OCP2SCP TIMING Caution; |
| * |
| * Read path of OCP2SCP is not working properly due to low reset value |
| * of SYNC2 parameter in OCP2SCP. Suggested reset value is 0x6 or more. |
| */ |
| if (!of_device_is_compatible(np, "ti,am437x-ocp2scp")) { |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| regs = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(regs)) { |
| ret = PTR_ERR(regs); |
| goto err1; |
| } |
| |
| pm_runtime_get_sync(&pdev->dev); |
| reg = readl_relaxed(regs + OCP2SCP_TIMING); |
| reg &= ~(SYNC2_MASK); |
| reg |= 0x6; |
| writel_relaxed(reg, regs + OCP2SCP_TIMING); |
| pm_runtime_put_sync(&pdev->dev); |
| } |
| |
| return 0; |
| |
| err1: |
| pm_runtime_disable(&pdev->dev); |
| |
| err0: |
| device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices); |
| |
| return ret; |
| } |
| |
| static int omap_ocp2scp_remove(struct platform_device *pdev) |
| { |
| pm_runtime_disable(&pdev->dev); |
| device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id omap_ocp2scp_id_table[] = { |
| { .compatible = "ti,omap-ocp2scp" }, |
| { .compatible = "ti,am437x-ocp2scp" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, omap_ocp2scp_id_table); |
| #endif |
| |
| static struct platform_driver omap_ocp2scp_driver = { |
| .probe = omap_ocp2scp_probe, |
| .remove = omap_ocp2scp_remove, |
| .driver = { |
| .name = "omap-ocp2scp", |
| .of_match_table = of_match_ptr(omap_ocp2scp_id_table), |
| }, |
| }; |
| |
| module_platform_driver(omap_ocp2scp_driver); |
| |
| MODULE_ALIAS("platform:omap-ocp2scp"); |
| MODULE_AUTHOR("Texas Instruments Inc."); |
| MODULE_DESCRIPTION("OMAP OCP2SCP driver"); |
| MODULE_LICENSE("GPL v2"); |