| # SPDX-License-Identifier: GPL-2.0-only |
| menu "Distributed Switch Architecture drivers" |
| depends on NET_DSA |
| |
| source "drivers/net/dsa/b53/Kconfig" |
| |
| config NET_DSA_BCM_SF2 |
| tristate "Broadcom Starfighter 2 Ethernet switch support" |
| depends on HAS_IOMEM |
| select NET_DSA_TAG_BRCM |
| select FIXED_PHY |
| select BCM7XXX_PHY |
| select MDIO_BCM_UNIMAC |
| select B53 |
| help |
| This enables support for the Broadcom Starfighter 2 Ethernet |
| switch chips. |
| |
| config NET_DSA_LOOP |
| tristate "DSA mock-up Ethernet switch chip support" |
| select FIXED_PHY |
| help |
| This enables support for a fake mock-up switch chip which |
| exercises the DSA APIs. |
| |
| source "drivers/net/dsa/hirschmann/Kconfig" |
| |
| config NET_DSA_LANTIQ_GSWIP |
| tristate "Lantiq / Intel GSWIP" |
| depends on HAS_IOMEM |
| select NET_DSA_TAG_GSWIP |
| help |
| This enables support for the Lantiq / Intel GSWIP 2.1 found in |
| the xrx200 / VR9 SoC. |
| |
| config NET_DSA_MT7530 |
| tristate "MediaTek MT753x and MT7621 Ethernet switch support" |
| select NET_DSA_TAG_MTK |
| help |
| This enables support for the MediaTek MT7530, MT7531, and MT7621 |
| Ethernet switch chips. |
| |
| config NET_DSA_MV88E6060 |
| tristate "Marvell 88E6060 ethernet switch chip support" |
| select NET_DSA_TAG_TRAILER |
| help |
| This enables support for the Marvell 88E6060 ethernet switch |
| chip. |
| |
| source "drivers/net/dsa/microchip/Kconfig" |
| |
| source "drivers/net/dsa/mv88e6xxx/Kconfig" |
| |
| source "drivers/net/dsa/ocelot/Kconfig" |
| |
| source "drivers/net/dsa/qca/Kconfig" |
| |
| source "drivers/net/dsa/sja1105/Kconfig" |
| |
| source "drivers/net/dsa/xrs700x/Kconfig" |
| |
| config NET_DSA_QCA8K |
| tristate "Qualcomm Atheros QCA8K Ethernet switch family support" |
| select NET_DSA_TAG_QCA |
| select REGMAP |
| help |
| This enables support for the Qualcomm Atheros QCA8K Ethernet |
| switch chips. |
| |
| config NET_DSA_REALTEK_SMI |
| tristate "Realtek SMI Ethernet switch family support" |
| select NET_DSA_TAG_RTL4_A |
| select FIXED_PHY |
| select IRQ_DOMAIN |
| select REALTEK_PHY |
| select REGMAP |
| help |
| This enables support for the Realtek SMI-based switch |
| chips, currently only RTL8366RB. |
| |
| config NET_DSA_SMSC_LAN9303 |
| tristate |
| select NET_DSA_TAG_LAN9303 |
| select REGMAP |
| help |
| This enables support for the SMSC/Microchip LAN9303 3 port ethernet |
| switch chips. |
| |
| config NET_DSA_SMSC_LAN9303_I2C |
| tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode" |
| depends on I2C |
| select NET_DSA_SMSC_LAN9303 |
| select REGMAP_I2C |
| help |
| Enable access functions if the SMSC/Microchip LAN9303 is configured |
| for I2C managed mode. |
| |
| config NET_DSA_SMSC_LAN9303_MDIO |
| tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in MDIO managed mode" |
| select NET_DSA_SMSC_LAN9303 |
| help |
| Enable access functions if the SMSC/Microchip LAN9303 is configured |
| for MDIO managed mode. |
| |
| config NET_DSA_VITESSE_VSC73XX |
| tristate |
| select FIXED_PHY |
| select VITESSE_PHY |
| select GPIOLIB |
| help |
| This enables support for the Vitesse VSC7385, VSC7388, |
| VSC7395 and VSC7398 SparX integrated ethernet switches. |
| |
| config NET_DSA_VITESSE_VSC73XX_SPI |
| tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support" |
| depends on SPI |
| select NET_DSA_VITESSE_VSC73XX |
| help |
| This enables support for the Vitesse VSC7385, VSC7388, VSC7395 |
| and VSC7398 SparX integrated ethernet switches in SPI managed mode. |
| |
| config NET_DSA_VITESSE_VSC73XX_PLATFORM |
| tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support" |
| depends on HAS_IOMEM |
| select NET_DSA_VITESSE_VSC73XX |
| help |
| This enables support for the Vitesse VSC7385, VSC7388, VSC7395 |
| and VSC7398 SparX integrated ethernet switches, connected over |
| a CPU-attached address bus and work in memory-mapped I/O mode. |
| endmenu |
