| /***************************************************************************** |
| * * |
| * File: pm3393.c * |
| * $Revision: 1.16 $ * |
| * $Date: 2005/05/14 00:59:32 $ * |
| * Description: * |
| * PMC/SIERRA (pm3393) MAC-PHY functionality. * |
| * part of the Chelsio 10Gb Ethernet Driver. * |
| * * |
| * This program is free software; you can redistribute it and/or modify * |
| * it under the terms of the GNU General Public License, version 2, as * |
| * published by the Free Software Foundation. * |
| * * |
| * You should have received a copy of the GNU General Public License along * |
| * with this program; if not, see <http://www.gnu.org/licenses/>. * |
| * * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * |
| * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * |
| * * |
| * http://www.chelsio.com * |
| * * |
| * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * |
| * All rights reserved. * |
| * * |
| * Maintainers: maintainers@chelsio.com * |
| * * |
| * Authors: Dimitrios Michailidis <dm@chelsio.com> * |
| * Tina Yang <tainay@chelsio.com> * |
| * Felix Marti <felix@chelsio.com> * |
| * Scott Bardone <sbardone@chelsio.com> * |
| * Kurt Ottaway <kottaway@chelsio.com> * |
| * Frank DiMambro <frank@chelsio.com> * |
| * * |
| * History: * |
| * * |
| ****************************************************************************/ |
| |
| #include "common.h" |
| #include "regs.h" |
| #include "gmac.h" |
| #include "elmer0.h" |
| #include "suni1x10gexp_regs.h" |
| |
| #include <linux/crc32.h> |
| #include <linux/slab.h> |
| |
| #define OFFSET(REG_ADDR) ((REG_ADDR) << 2) |
| |
| #define IPG 12 |
| #define TXXG_CONF1_VAL ((IPG << SUNI1x10GEXP_BITOFF_TXXG_IPGT) | \ |
| SUNI1x10GEXP_BITMSK_TXXG_32BIT_ALIGN | SUNI1x10GEXP_BITMSK_TXXG_CRCEN | \ |
| SUNI1x10GEXP_BITMSK_TXXG_PADEN) |
| #define RXXG_CONF1_VAL (SUNI1x10GEXP_BITMSK_RXXG_PUREP | 0x14 | \ |
| SUNI1x10GEXP_BITMSK_RXXG_FLCHK | SUNI1x10GEXP_BITMSK_RXXG_CRC_STRIP) |
| |
| /* Update statistics every 15 minutes */ |
| #define STATS_TICK_SECS (15 * 60) |
| |
| enum { /* RMON registers */ |
| RxOctetsReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW, |
| RxUnicastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_4_LOW, |
| RxMulticastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_5_LOW, |
| RxBroadcastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_6_LOW, |
| RxPAUSEMACCtrlFramesReceived = SUNI1x10GEXP_REG_MSTAT_COUNTER_8_LOW, |
| RxFrameCheckSequenceErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_10_LOW, |
| RxFramesLostDueToInternalMACErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_11_LOW, |
| RxSymbolErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_12_LOW, |
| RxInRangeLengthErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_13_LOW, |
| RxFramesTooLongErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_15_LOW, |
| RxJabbers = SUNI1x10GEXP_REG_MSTAT_COUNTER_16_LOW, |
| RxFragments = SUNI1x10GEXP_REG_MSTAT_COUNTER_17_LOW, |
| RxUndersizedFrames = SUNI1x10GEXP_REG_MSTAT_COUNTER_18_LOW, |
| RxJumboFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_25_LOW, |
| RxJumboOctetsReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_26_LOW, |
| |
| TxOctetsTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW, |
| TxFramesLostDueToInternalMACTransmissionError = SUNI1x10GEXP_REG_MSTAT_COUNTER_35_LOW, |
| TxTransmitSystemError = SUNI1x10GEXP_REG_MSTAT_COUNTER_36_LOW, |
| TxUnicastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_38_LOW, |
| TxMulticastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_40_LOW, |
| TxBroadcastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_42_LOW, |
| TxPAUSEMACCtrlFramesTransmitted = SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW, |
| TxJumboFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_51_LOW, |
| TxJumboOctetsReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_52_LOW |
| }; |
| |
| struct _cmac_instance { |
| u8 enabled; |
| u8 fc; |
| u8 mac_addr[6]; |
| }; |
| |
| static int pmread(struct cmac *cmac, u32 reg, u32 * data32) |
| { |
| t1_tpi_read(cmac->adapter, OFFSET(reg), data32); |
| return 0; |
| } |
| |
| static int pmwrite(struct cmac *cmac, u32 reg, u32 data32) |
| { |
| t1_tpi_write(cmac->adapter, OFFSET(reg), data32); |
| return 0; |
| } |
| |
| /* Port reset. */ |
| static int pm3393_reset(struct cmac *cmac) |
| { |
| return 0; |
| } |
| |
| /* |
| * Enable interrupts for the PM3393 |
| * |
| * 1. Enable PM3393 BLOCK interrupts. |
| * 2. Enable PM3393 Master Interrupt bit(INTE) |
| * 3. Enable ELMER's PM3393 bit. |
| * 4. Enable Terminator external interrupt. |
| */ |
| static int pm3393_interrupt_enable(struct cmac *cmac) |
| { |
| u32 pl_intr; |
| |
| /* PM3393 - Enabling all hardware block interrupts. |
| */ |
| pmwrite(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE, 0xffff); |
| pmwrite(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE, 0xffff); |
| pmwrite(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE, 0xffff); |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE, 0xffff); |
| |
| /* Don't interrupt on statistics overflow, we are polling */ |
| pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3, 0); |
| |
| pmwrite(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE, 0xffff); |
| pmwrite(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK, 0xffff); |
| pmwrite(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE, 0xffff); |
| pmwrite(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE, 0xffff); |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_3, 0xffff); |
| pmwrite(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK, 0xffff); |
| pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_3, 0xffff); |
| pmwrite(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK, 0xffff); |
| pmwrite(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE, 0xffff); |
| |
| /* PM3393 - Global interrupt enable |
| */ |
| /* TBD XXX Disable for now until we figure out why error interrupts keep asserting. */ |
| pmwrite(cmac, SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE, |
| 0 /*SUNI1x10GEXP_BITMSK_TOP_INTE */ ); |
| |
| /* TERMINATOR - PL_INTERUPTS_EXT */ |
| pl_intr = readl(cmac->adapter->regs + A_PL_ENABLE); |
| pl_intr |= F_PL_INTR_EXT; |
| writel(pl_intr, cmac->adapter->regs + A_PL_ENABLE); |
| return 0; |
| } |
| |
| static int pm3393_interrupt_disable(struct cmac *cmac) |
| { |
| u32 elmer; |
| |
| /* PM3393 - Enabling HW interrupt blocks. */ |
| pmwrite(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_3, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_3, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK, 0); |
| pmwrite(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE, 0); |
| |
| /* PM3393 - Global interrupt enable */ |
| pmwrite(cmac, SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE, 0); |
| |
| /* ELMER - External chip interrupts. */ |
| t1_tpi_read(cmac->adapter, A_ELMER0_INT_ENABLE, &elmer); |
| elmer &= ~ELMER0_GP_BIT1; |
| t1_tpi_write(cmac->adapter, A_ELMER0_INT_ENABLE, elmer); |
| |
| /* TERMINATOR - PL_INTERUPTS_EXT */ |
| /* DO NOT DISABLE TERMINATOR's EXTERNAL INTERRUPTS. ANOTHER CHIP |
| * COULD WANT THEM ENABLED. We disable PM3393 at the ELMER level. |
| */ |
| |
| return 0; |
| } |
| |
| static int pm3393_interrupt_clear(struct cmac *cmac) |
| { |
| u32 elmer; |
| u32 pl_intr; |
| u32 val32; |
| |
| /* PM3393 - Clearing HW interrupt blocks. Note, this assumes |
| * bit WCIMODE=0 for a clear-on-read. |
| */ |
| pmread(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_STATUS, &val32); |
| pmread(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_STATUS, &val32); |
| pmread(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_STATUS, &val32); |
| pmread(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_STATUS, &val32); |
| pmread(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT, &val32); |
| pmread(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_STATUS, &val32); |
| pmread(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_INTERRUPT, &val32); |
| pmread(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_STATUS, &val32); |
| pmread(cmac, SUNI1x10GEXP_REG_RXXG_INTERRUPT, &val32); |
| pmread(cmac, SUNI1x10GEXP_REG_TXXG_INTERRUPT, &val32); |
| pmread(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT, &val32); |
| pmread(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_INDICATION, |
| &val32); |
| pmread(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_STATUS, &val32); |
| pmread(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_CHANGE, &val32); |
| |
| /* PM3393 - Global interrupt status |
| */ |
| pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS, &val32); |
| |
| /* ELMER - External chip interrupts. |
| */ |
| t1_tpi_read(cmac->adapter, A_ELMER0_INT_CAUSE, &elmer); |
| elmer |= ELMER0_GP_BIT1; |
| t1_tpi_write(cmac->adapter, A_ELMER0_INT_CAUSE, elmer); |
| |
| /* TERMINATOR - PL_INTERUPTS_EXT |
| */ |
| pl_intr = readl(cmac->adapter->regs + A_PL_CAUSE); |
| pl_intr |= F_PL_INTR_EXT; |
| writel(pl_intr, cmac->adapter->regs + A_PL_CAUSE); |
| |
| return 0; |
| } |
| |
| /* Interrupt handler */ |
| static int pm3393_interrupt_handler(struct cmac *cmac) |
| { |
| u32 master_intr_status; |
| |
| /* Read the master interrupt status register. */ |
| pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS, |
| &master_intr_status); |
| if (netif_msg_intr(cmac->adapter)) |
| dev_dbg(&cmac->adapter->pdev->dev, "PM3393 intr cause 0x%x\n", |
| master_intr_status); |
| |
| /* TBD XXX Lets just clear everything for now */ |
| pm3393_interrupt_clear(cmac); |
| |
| return 0; |
| } |
| |
| static int pm3393_enable(struct cmac *cmac, int which) |
| { |
| if (which & MAC_DIRECTION_RX) |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_1, |
| (RXXG_CONF1_VAL | SUNI1x10GEXP_BITMSK_RXXG_RXEN)); |
| |
| if (which & MAC_DIRECTION_TX) { |
| u32 val = TXXG_CONF1_VAL | SUNI1x10GEXP_BITMSK_TXXG_TXEN0; |
| |
| if (cmac->instance->fc & PAUSE_RX) |
| val |= SUNI1x10GEXP_BITMSK_TXXG_FCRX; |
| if (cmac->instance->fc & PAUSE_TX) |
| val |= SUNI1x10GEXP_BITMSK_TXXG_FCTX; |
| pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_1, val); |
| } |
| |
| cmac->instance->enabled |= which; |
| return 0; |
| } |
| |
| static int pm3393_enable_port(struct cmac *cmac, int which) |
| { |
| /* Clear port statistics */ |
| pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_CONTROL, |
| SUNI1x10GEXP_BITMSK_MSTAT_CLEAR); |
| udelay(2); |
| memset(&cmac->stats, 0, sizeof(struct cmac_statistics)); |
| |
| pm3393_enable(cmac, which); |
| |
| /* |
| * XXX This should be done by the PHY and preferably not at all. |
| * The PHY doesn't give us link status indication on its own so have |
| * the link management code query it instead. |
| */ |
| t1_link_changed(cmac->adapter, 0); |
| return 0; |
| } |
| |
| static int pm3393_disable(struct cmac *cmac, int which) |
| { |
| if (which & MAC_DIRECTION_RX) |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_1, RXXG_CONF1_VAL); |
| if (which & MAC_DIRECTION_TX) |
| pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_1, TXXG_CONF1_VAL); |
| |
| /* |
| * The disable is graceful. Give the PM3393 time. Can't wait very |
| * long here, we may be holding locks. |
| */ |
| udelay(20); |
| |
| cmac->instance->enabled &= ~which; |
| return 0; |
| } |
| |
| static int pm3393_loopback_enable(struct cmac *cmac) |
| { |
| return 0; |
| } |
| |
| static int pm3393_loopback_disable(struct cmac *cmac) |
| { |
| return 0; |
| } |
| |
| static int pm3393_set_mtu(struct cmac *cmac, int mtu) |
| { |
| int enabled = cmac->instance->enabled; |
| |
| mtu += ETH_HLEN + ETH_FCS_LEN; |
| |
| /* Disable Rx/Tx MAC before configuring it. */ |
| if (enabled) |
| pm3393_disable(cmac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); |
| |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MAX_FRAME_LENGTH, mtu); |
| pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_MAX_FRAME_SIZE, mtu); |
| |
| if (enabled) |
| pm3393_enable(cmac, enabled); |
| return 0; |
| } |
| |
| static int pm3393_set_rx_mode(struct cmac *cmac, struct t1_rx_mode *rm) |
| { |
| int enabled = cmac->instance->enabled & MAC_DIRECTION_RX; |
| u32 rx_mode; |
| |
| /* Disable MAC RX before reconfiguring it */ |
| if (enabled) |
| pm3393_disable(cmac, MAC_DIRECTION_RX); |
| |
| pmread(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, &rx_mode); |
| rx_mode &= ~(SUNI1x10GEXP_BITMSK_RXXG_PMODE | |
| SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN); |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, |
| (u16)rx_mode); |
| |
| if (t1_rx_mode_promisc(rm)) { |
| /* Promiscuous mode. */ |
| rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_PMODE; |
| } |
| if (t1_rx_mode_allmulti(rm)) { |
| /* Accept all multicast. */ |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW, 0xffff); |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW, 0xffff); |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH, 0xffff); |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH, 0xffff); |
| rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN; |
| } else if (t1_rx_mode_mc_cnt(rm)) { |
| /* Accept one or more multicast(s). */ |
| struct netdev_hw_addr *ha; |
| int bit; |
| u16 mc_filter[4] = { 0, }; |
| |
| netdev_for_each_mc_addr(ha, t1_get_netdev(rm)) { |
| /* bit[23:28] */ |
| bit = (ether_crc(ETH_ALEN, ha->addr) >> 23) & 0x3f; |
| mc_filter[bit >> 4] |= 1 << (bit & 0xf); |
| } |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW, mc_filter[0]); |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW, mc_filter[1]); |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH, mc_filter[2]); |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH, mc_filter[3]); |
| rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN; |
| } |
| |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, (u16)rx_mode); |
| |
| if (enabled) |
| pm3393_enable(cmac, MAC_DIRECTION_RX); |
| |
| return 0; |
| } |
| |
| static int pm3393_get_speed_duplex_fc(struct cmac *cmac, int *speed, |
| int *duplex, int *fc) |
| { |
| if (speed) |
| *speed = SPEED_10000; |
| if (duplex) |
| *duplex = DUPLEX_FULL; |
| if (fc) |
| *fc = cmac->instance->fc; |
| return 0; |
| } |
| |
| static int pm3393_set_speed_duplex_fc(struct cmac *cmac, int speed, int duplex, |
| int fc) |
| { |
| if (speed >= 0 && speed != SPEED_10000) |
| return -1; |
| if (duplex >= 0 && duplex != DUPLEX_FULL) |
| return -1; |
| if (fc & ~(PAUSE_TX | PAUSE_RX)) |
| return -1; |
| |
| if (fc != cmac->instance->fc) { |
| cmac->instance->fc = (u8) fc; |
| if (cmac->instance->enabled & MAC_DIRECTION_TX) |
| pm3393_enable(cmac, MAC_DIRECTION_TX); |
| } |
| return 0; |
| } |
| |
| #define RMON_UPDATE(mac, name, stat_name) \ |
| { \ |
| t1_tpi_read((mac)->adapter, OFFSET(name), &val0); \ |
| t1_tpi_read((mac)->adapter, OFFSET((name)+1), &val1); \ |
| t1_tpi_read((mac)->adapter, OFFSET((name)+2), &val2); \ |
| (mac)->stats.stat_name = (u64)(val0 & 0xffff) | \ |
| ((u64)(val1 & 0xffff) << 16) | \ |
| ((u64)(val2 & 0xff) << 32) | \ |
| ((mac)->stats.stat_name & \ |
| 0xffffff0000000000ULL); \ |
| if (ro & \ |
| (1ULL << ((name - SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW) >> 2))) \ |
| (mac)->stats.stat_name += 1ULL << 40; \ |
| } |
| |
| static const struct cmac_statistics *pm3393_update_statistics(struct cmac *mac, |
| int flag) |
| { |
| u64 ro; |
| u32 val0, val1, val2, val3; |
| |
| /* Snap the counters */ |
| pmwrite(mac, SUNI1x10GEXP_REG_MSTAT_CONTROL, |
| SUNI1x10GEXP_BITMSK_MSTAT_SNAP); |
| |
| /* Counter rollover, clear on read */ |
| pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_0, &val0); |
| pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_1, &val1); |
| pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_2, &val2); |
| pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_3, &val3); |
| ro = ((u64)val0 & 0xffff) | (((u64)val1 & 0xffff) << 16) | |
| (((u64)val2 & 0xffff) << 32) | (((u64)val3 & 0xffff) << 48); |
| |
| /* Rx stats */ |
| RMON_UPDATE(mac, RxOctetsReceivedOK, RxOctetsOK); |
| RMON_UPDATE(mac, RxUnicastFramesReceivedOK, RxUnicastFramesOK); |
| RMON_UPDATE(mac, RxMulticastFramesReceivedOK, RxMulticastFramesOK); |
| RMON_UPDATE(mac, RxBroadcastFramesReceivedOK, RxBroadcastFramesOK); |
| RMON_UPDATE(mac, RxPAUSEMACCtrlFramesReceived, RxPauseFrames); |
| RMON_UPDATE(mac, RxFrameCheckSequenceErrors, RxFCSErrors); |
| RMON_UPDATE(mac, RxFramesLostDueToInternalMACErrors, |
| RxInternalMACRcvError); |
| RMON_UPDATE(mac, RxSymbolErrors, RxSymbolErrors); |
| RMON_UPDATE(mac, RxInRangeLengthErrors, RxInRangeLengthErrors); |
| RMON_UPDATE(mac, RxFramesTooLongErrors , RxFrameTooLongErrors); |
| RMON_UPDATE(mac, RxJabbers, RxJabberErrors); |
| RMON_UPDATE(mac, RxFragments, RxRuntErrors); |
| RMON_UPDATE(mac, RxUndersizedFrames, RxRuntErrors); |
| RMON_UPDATE(mac, RxJumboFramesReceivedOK, RxJumboFramesOK); |
| RMON_UPDATE(mac, RxJumboOctetsReceivedOK, RxJumboOctetsOK); |
| |
| /* Tx stats */ |
| RMON_UPDATE(mac, TxOctetsTransmittedOK, TxOctetsOK); |
| RMON_UPDATE(mac, TxFramesLostDueToInternalMACTransmissionError, |
| TxInternalMACXmitError); |
| RMON_UPDATE(mac, TxTransmitSystemError, TxFCSErrors); |
| RMON_UPDATE(mac, TxUnicastFramesTransmittedOK, TxUnicastFramesOK); |
| RMON_UPDATE(mac, TxMulticastFramesTransmittedOK, TxMulticastFramesOK); |
| RMON_UPDATE(mac, TxBroadcastFramesTransmittedOK, TxBroadcastFramesOK); |
| RMON_UPDATE(mac, TxPAUSEMACCtrlFramesTransmitted, TxPauseFrames); |
| RMON_UPDATE(mac, TxJumboFramesReceivedOK, TxJumboFramesOK); |
| RMON_UPDATE(mac, TxJumboOctetsReceivedOK, TxJumboOctetsOK); |
| |
| return &mac->stats; |
| } |
| |
| static int pm3393_macaddress_get(struct cmac *cmac, u8 mac_addr[6]) |
| { |
| memcpy(mac_addr, cmac->instance->mac_addr, ETH_ALEN); |
| return 0; |
| } |
| |
| static int pm3393_macaddress_set(struct cmac *cmac, u8 ma[6]) |
| { |
| u32 val, lo, mid, hi, enabled = cmac->instance->enabled; |
| |
| /* |
| * MAC addr: 00:07:43:00:13:09 |
| * |
| * ma[5] = 0x09 |
| * ma[4] = 0x13 |
| * ma[3] = 0x00 |
| * ma[2] = 0x43 |
| * ma[1] = 0x07 |
| * ma[0] = 0x00 |
| * |
| * The PM3393 requires byte swapping and reverse order entry |
| * when programming MAC addresses: |
| * |
| * low_bits[15:0] = ma[1]:ma[0] |
| * mid_bits[31:16] = ma[3]:ma[2] |
| * high_bits[47:32] = ma[5]:ma[4] |
| */ |
| |
| /* Store local copy */ |
| memcpy(cmac->instance->mac_addr, ma, ETH_ALEN); |
| |
| lo = ((u32) ma[1] << 8) | (u32) ma[0]; |
| mid = ((u32) ma[3] << 8) | (u32) ma[2]; |
| hi = ((u32) ma[5] << 8) | (u32) ma[4]; |
| |
| /* Disable Rx/Tx MAC before configuring it. */ |
| if (enabled) |
| pm3393_disable(cmac, MAC_DIRECTION_RX | MAC_DIRECTION_TX); |
| |
| /* Set RXXG Station Address */ |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_15_0, lo); |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_31_16, mid); |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_47_32, hi); |
| |
| /* Set TXXG Station Address */ |
| pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_15_0, lo); |
| pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_31_16, mid); |
| pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_47_32, hi); |
| |
| /* Setup Exact Match Filter 1 with our MAC address |
| * |
| * Must disable exact match filter before configuring it. |
| */ |
| pmread(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, &val); |
| val &= 0xff0f; |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, val); |
| |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_LOW, lo); |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_MID, mid); |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_HIGH, hi); |
| |
| val |= 0x0090; |
| pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, val); |
| |
| if (enabled) |
| pm3393_enable(cmac, enabled); |
| return 0; |
| } |
| |
| static void pm3393_destroy(struct cmac *cmac) |
| { |
| kfree(cmac); |
| } |
| |
| static const struct cmac_ops pm3393_ops = { |
| .destroy = pm3393_destroy, |
| .reset = pm3393_reset, |
| .interrupt_enable = pm3393_interrupt_enable, |
| .interrupt_disable = pm3393_interrupt_disable, |
| .interrupt_clear = pm3393_interrupt_clear, |
| .interrupt_handler = pm3393_interrupt_handler, |
| .enable = pm3393_enable_port, |
| .disable = pm3393_disable, |
| .loopback_enable = pm3393_loopback_enable, |
| .loopback_disable = pm3393_loopback_disable, |
| .set_mtu = pm3393_set_mtu, |
| .set_rx_mode = pm3393_set_rx_mode, |
| .get_speed_duplex_fc = pm3393_get_speed_duplex_fc, |
| .set_speed_duplex_fc = pm3393_set_speed_duplex_fc, |
| .statistics_update = pm3393_update_statistics, |
| .macaddress_get = pm3393_macaddress_get, |
| .macaddress_set = pm3393_macaddress_set |
| }; |
| |
| static struct cmac *pm3393_mac_create(adapter_t *adapter, int index) |
| { |
| struct cmac *cmac; |
| |
| cmac = kzalloc(sizeof(*cmac) + sizeof(cmac_instance), GFP_KERNEL); |
| if (!cmac) |
| return NULL; |
| |
| cmac->ops = &pm3393_ops; |
| cmac->instance = (cmac_instance *) (cmac + 1); |
| cmac->adapter = adapter; |
| cmac->instance->fc = PAUSE_TX | PAUSE_RX; |
| |
| t1_tpi_write(adapter, OFFSET(0x0001), 0x00008000); |
| t1_tpi_write(adapter, OFFSET(0x0001), 0x00000000); |
| t1_tpi_write(adapter, OFFSET(0x2308), 0x00009800); |
| t1_tpi_write(adapter, OFFSET(0x2305), 0x00001001); /* PL4IO Enable */ |
| t1_tpi_write(adapter, OFFSET(0x2320), 0x00008800); |
| t1_tpi_write(adapter, OFFSET(0x2321), 0x00008800); |
| t1_tpi_write(adapter, OFFSET(0x2322), 0x00008800); |
| t1_tpi_write(adapter, OFFSET(0x2323), 0x00008800); |
| t1_tpi_write(adapter, OFFSET(0x2324), 0x00008800); |
| t1_tpi_write(adapter, OFFSET(0x2325), 0x00008800); |
| t1_tpi_write(adapter, OFFSET(0x2326), 0x00008800); |
| t1_tpi_write(adapter, OFFSET(0x2327), 0x00008800); |
| t1_tpi_write(adapter, OFFSET(0x2328), 0x00008800); |
| t1_tpi_write(adapter, OFFSET(0x2329), 0x00008800); |
| t1_tpi_write(adapter, OFFSET(0x232a), 0x00008800); |
| t1_tpi_write(adapter, OFFSET(0x232b), 0x00008800); |
| t1_tpi_write(adapter, OFFSET(0x232c), 0x00008800); |
| t1_tpi_write(adapter, OFFSET(0x232d), 0x00008800); |
| t1_tpi_write(adapter, OFFSET(0x232e), 0x00008800); |
| t1_tpi_write(adapter, OFFSET(0x232f), 0x00008800); |
| t1_tpi_write(adapter, OFFSET(0x230d), 0x00009c00); |
| t1_tpi_write(adapter, OFFSET(0x2304), 0x00000202); /* PL4IO Calendar Repetitions */ |
| |
| t1_tpi_write(adapter, OFFSET(0x3200), 0x00008080); /* EFLX Enable */ |
| t1_tpi_write(adapter, OFFSET(0x3210), 0x00000000); /* EFLX Channel Deprovision */ |
| t1_tpi_write(adapter, OFFSET(0x3203), 0x00000000); /* EFLX Low Limit */ |
| t1_tpi_write(adapter, OFFSET(0x3204), 0x00000040); /* EFLX High Limit */ |
| t1_tpi_write(adapter, OFFSET(0x3205), 0x000002cc); /* EFLX Almost Full */ |
| t1_tpi_write(adapter, OFFSET(0x3206), 0x00000199); /* EFLX Almost Empty */ |
| t1_tpi_write(adapter, OFFSET(0x3207), 0x00000240); /* EFLX Cut Through Threshold */ |
| t1_tpi_write(adapter, OFFSET(0x3202), 0x00000000); /* EFLX Indirect Register Update */ |
| t1_tpi_write(adapter, OFFSET(0x3210), 0x00000001); /* EFLX Channel Provision */ |
| t1_tpi_write(adapter, OFFSET(0x3208), 0x0000ffff); /* EFLX Undocumented */ |
| t1_tpi_write(adapter, OFFSET(0x320a), 0x0000ffff); /* EFLX Undocumented */ |
| t1_tpi_write(adapter, OFFSET(0x320c), 0x0000ffff); /* EFLX enable overflow interrupt The other bit are undocumented */ |
| t1_tpi_write(adapter, OFFSET(0x320e), 0x0000ffff); /* EFLX Undocumented */ |
| |
| t1_tpi_write(adapter, OFFSET(0x2200), 0x0000c000); /* IFLX Configuration - enable */ |
| t1_tpi_write(adapter, OFFSET(0x2201), 0x00000000); /* IFLX Channel Deprovision */ |
| t1_tpi_write(adapter, OFFSET(0x220e), 0x00000000); /* IFLX Low Limit */ |
| t1_tpi_write(adapter, OFFSET(0x220f), 0x00000100); /* IFLX High Limit */ |
| t1_tpi_write(adapter, OFFSET(0x2210), 0x00000c00); /* IFLX Almost Full Limit */ |
| t1_tpi_write(adapter, OFFSET(0x2211), 0x00000599); /* IFLX Almost Empty Limit */ |
| t1_tpi_write(adapter, OFFSET(0x220d), 0x00000000); /* IFLX Indirect Register Update */ |
| t1_tpi_write(adapter, OFFSET(0x2201), 0x00000001); /* IFLX Channel Provision */ |
| t1_tpi_write(adapter, OFFSET(0x2203), 0x0000ffff); /* IFLX Undocumented */ |
| t1_tpi_write(adapter, OFFSET(0x2205), 0x0000ffff); /* IFLX Undocumented */ |
| t1_tpi_write(adapter, OFFSET(0x2209), 0x0000ffff); /* IFLX Enable overflow interrupt. The other bit are undocumented */ |
| |
| t1_tpi_write(adapter, OFFSET(0x2241), 0xfffffffe); /* PL4MOS Undocumented */ |
| t1_tpi_write(adapter, OFFSET(0x2242), 0x0000ffff); /* PL4MOS Undocumented */ |
| t1_tpi_write(adapter, OFFSET(0x2243), 0x00000008); /* PL4MOS Starving Burst Size */ |
| t1_tpi_write(adapter, OFFSET(0x2244), 0x00000008); /* PL4MOS Hungry Burst Size */ |
| t1_tpi_write(adapter, OFFSET(0x2245), 0x00000008); /* PL4MOS Transfer Size */ |
| t1_tpi_write(adapter, OFFSET(0x2240), 0x00000005); /* PL4MOS Disable */ |
| |
| t1_tpi_write(adapter, OFFSET(0x2280), 0x00002103); /* PL4ODP Training Repeat and SOP rule */ |
| t1_tpi_write(adapter, OFFSET(0x2284), 0x00000000); /* PL4ODP MAX_T setting */ |
| |
| t1_tpi_write(adapter, OFFSET(0x3280), 0x00000087); /* PL4IDU Enable data forward, port state machine. Set ALLOW_NON_ZERO_OLB */ |
| t1_tpi_write(adapter, OFFSET(0x3282), 0x0000001f); /* PL4IDU Enable Dip4 check error interrupts */ |
| |
| t1_tpi_write(adapter, OFFSET(0x3040), 0x0c32); /* # TXXG Config */ |
| /* For T1 use timer based Mac flow control. */ |
| t1_tpi_write(adapter, OFFSET(0x304d), 0x8000); |
| t1_tpi_write(adapter, OFFSET(0x2040), 0x059c); /* # RXXG Config */ |
| t1_tpi_write(adapter, OFFSET(0x2049), 0x0001); /* # RXXG Cut Through */ |
| t1_tpi_write(adapter, OFFSET(0x2070), 0x0000); /* # Disable promiscuous mode */ |
| |
| /* Setup Exact Match Filter 0 to allow broadcast packets. |
| */ |
| t1_tpi_write(adapter, OFFSET(0x206e), 0x0000); /* # Disable Match Enable bit */ |
| t1_tpi_write(adapter, OFFSET(0x204a), 0xffff); /* # low addr */ |
| t1_tpi_write(adapter, OFFSET(0x204b), 0xffff); /* # mid addr */ |
| t1_tpi_write(adapter, OFFSET(0x204c), 0xffff); /* # high addr */ |
| t1_tpi_write(adapter, OFFSET(0x206e), 0x0009); /* # Enable Match Enable bit */ |
| |
| t1_tpi_write(adapter, OFFSET(0x0003), 0x0000); /* # NO SOP/ PAD_EN setup */ |
| t1_tpi_write(adapter, OFFSET(0x0100), 0x0ff0); /* # RXEQB disabled */ |
| t1_tpi_write(adapter, OFFSET(0x0101), 0x0f0f); /* # No Preemphasis */ |
| |
| return cmac; |
| } |
| |
| static int pm3393_mac_reset(adapter_t * adapter) |
| { |
| u32 val; |
| u32 x; |
| u32 is_pl4_reset_finished; |
| u32 is_pl4_outof_lock; |
| u32 is_xaui_mabc_pll_locked; |
| u32 successful_reset; |
| int i; |
| |
| /* The following steps are required to properly reset |
| * the PM3393. This information is provided in the |
| * PM3393 datasheet (Issue 2: November 2002) |
| * section 13.1 -- Device Reset. |
| * |
| * The PM3393 has three types of components that are |
| * individually reset: |
| * |
| * DRESETB - Digital circuitry |
| * PL4_ARESETB - PL4 analog circuitry |
| * XAUI_ARESETB - XAUI bus analog circuitry |
| * |
| * Steps to reset PM3393 using RSTB pin: |
| * |
| * 1. Assert RSTB pin low ( write 0 ) |
| * 2. Wait at least 1ms to initiate a complete initialization of device. |
| * 3. Wait until all external clocks and REFSEL are stable. |
| * 4. Wait minimum of 1ms. (after external clocks and REFEL are stable) |
| * 5. De-assert RSTB ( write 1 ) |
| * 6. Wait until internal timers to expires after ~14ms. |
| * - Allows analog clock synthesizer(PL4CSU) to stabilize to |
| * selected reference frequency before allowing the digital |
| * portion of the device to operate. |
| * 7. Wait at least 200us for XAUI interface to stabilize. |
| * 8. Verify the PM3393 came out of reset successfully. |
| * Set successful reset flag if everything worked else try again |
| * a few more times. |
| */ |
| |
| successful_reset = 0; |
| for (i = 0; i < 3 && !successful_reset; i++) { |
| /* 1 */ |
| t1_tpi_read(adapter, A_ELMER0_GPO, &val); |
| val &= ~1; |
| t1_tpi_write(adapter, A_ELMER0_GPO, val); |
| |
| /* 2 */ |
| msleep(1); |
| |
| /* 3 */ |
| msleep(1); |
| |
| /* 4 */ |
| msleep(2 /*1 extra ms for safety */ ); |
| |
| /* 5 */ |
| val |= 1; |
| t1_tpi_write(adapter, A_ELMER0_GPO, val); |
| |
| /* 6 */ |
| msleep(15 /*1 extra ms for safety */ ); |
| |
| /* 7 */ |
| msleep(1); |
| |
| /* 8 */ |
| |
| /* Has PL4 analog block come out of reset correctly? */ |
| t1_tpi_read(adapter, OFFSET(SUNI1x10GEXP_REG_DEVICE_STATUS), &val); |
| is_pl4_reset_finished = (val & SUNI1x10GEXP_BITMSK_TOP_EXPIRED); |
| |
| /* TBD XXX SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL gets locked later in the init sequence |
| * figure out why? */ |
| |
| /* Have all PL4 block clocks locked? */ |
| x = (SUNI1x10GEXP_BITMSK_TOP_PL4_ID_DOOL |
| /*| SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL */ | |
| SUNI1x10GEXP_BITMSK_TOP_PL4_ID_ROOL | |
| SUNI1x10GEXP_BITMSK_TOP_PL4_IS_ROOL | |
| SUNI1x10GEXP_BITMSK_TOP_PL4_OUT_ROOL); |
| is_pl4_outof_lock = (val & x); |
| |
| /* ??? If this fails, might be able to software reset the XAUI part |
| * and try to recover... thus saving us from doing another HW reset */ |
| /* Has the XAUI MABC PLL circuitry stablized? */ |
| is_xaui_mabc_pll_locked = |
| (val & SUNI1x10GEXP_BITMSK_TOP_SXRA_EXPIRED); |
| |
| successful_reset = (is_pl4_reset_finished && !is_pl4_outof_lock |
| && is_xaui_mabc_pll_locked); |
| |
| if (netif_msg_hw(adapter)) |
| dev_dbg(&adapter->pdev->dev, |
| "PM3393 HW reset %d: pl4_reset 0x%x, val 0x%x, " |
| "is_pl4_outof_lock 0x%x, xaui_locked 0x%x\n", |
| i, is_pl4_reset_finished, val, |
| is_pl4_outof_lock, is_xaui_mabc_pll_locked); |
| } |
| return successful_reset ? 0 : 1; |
| } |
| |
| const struct gmac t1_pm3393_ops = { |
| .stats_update_period = STATS_TICK_SECS, |
| .create = pm3393_mac_create, |
| .reset = pm3393_mac_reset, |
| }; |