| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright(c) 2018 Intel Corporation. All rights reserved. */ |
| |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/ndctl.h> |
| #include <linux/slab.h> |
| #include <linux/io.h> |
| #include <linux/mm.h> |
| #include <linux/cred.h> |
| #include <linux/key.h> |
| #include <linux/key-type.h> |
| #include <keys/user-type.h> |
| #include <keys/encrypted-type.h> |
| #include "nd-core.h" |
| #include "nd.h" |
| |
| #define NVDIMM_BASE_KEY 0 |
| #define NVDIMM_NEW_KEY 1 |
| |
| static bool key_revalidate = true; |
| module_param(key_revalidate, bool, 0444); |
| MODULE_PARM_DESC(key_revalidate, "Require key validation at init."); |
| |
| static const char zero_key[NVDIMM_PASSPHRASE_LEN]; |
| |
| static void *key_data(struct key *key) |
| { |
| struct encrypted_key_payload *epayload = dereference_key_locked(key); |
| |
| lockdep_assert_held_read(&key->sem); |
| |
| return epayload->decrypted_data; |
| } |
| |
| static void nvdimm_put_key(struct key *key) |
| { |
| if (!key) |
| return; |
| |
| up_read(&key->sem); |
| key_put(key); |
| } |
| |
| /* |
| * Retrieve kernel key for DIMM and request from user space if |
| * necessary. Returns a key held for read and must be put by |
| * nvdimm_put_key() before the usage goes out of scope. |
| */ |
| static struct key *nvdimm_request_key(struct nvdimm *nvdimm) |
| { |
| struct key *key = NULL; |
| static const char NVDIMM_PREFIX[] = "nvdimm:"; |
| char desc[NVDIMM_KEY_DESC_LEN + sizeof(NVDIMM_PREFIX)]; |
| struct device *dev = &nvdimm->dev; |
| |
| sprintf(desc, "%s%s", NVDIMM_PREFIX, nvdimm->dimm_id); |
| key = request_key(&key_type_encrypted, desc, ""); |
| if (IS_ERR(key)) { |
| if (PTR_ERR(key) == -ENOKEY) |
| dev_dbg(dev, "request_key() found no key\n"); |
| else |
| dev_dbg(dev, "request_key() upcall failed\n"); |
| key = NULL; |
| } else { |
| struct encrypted_key_payload *epayload; |
| |
| down_read(&key->sem); |
| epayload = dereference_key_locked(key); |
| if (epayload->decrypted_datalen != NVDIMM_PASSPHRASE_LEN) { |
| up_read(&key->sem); |
| key_put(key); |
| key = NULL; |
| } |
| } |
| |
| return key; |
| } |
| |
| static const void *nvdimm_get_key_payload(struct nvdimm *nvdimm, |
| struct key **key) |
| { |
| *key = nvdimm_request_key(nvdimm); |
| if (!*key) |
| return zero_key; |
| |
| return key_data(*key); |
| } |
| |
| static struct key *nvdimm_lookup_user_key(struct nvdimm *nvdimm, |
| key_serial_t id, int subclass) |
| { |
| key_ref_t keyref; |
| struct key *key; |
| struct encrypted_key_payload *epayload; |
| struct device *dev = &nvdimm->dev; |
| |
| keyref = lookup_user_key(id, 0, KEY_NEED_SEARCH); |
| if (IS_ERR(keyref)) |
| return NULL; |
| |
| key = key_ref_to_ptr(keyref); |
| if (key->type != &key_type_encrypted) { |
| key_put(key); |
| return NULL; |
| } |
| |
| dev_dbg(dev, "%s: key found: %#x\n", __func__, key_serial(key)); |
| |
| down_read_nested(&key->sem, subclass); |
| epayload = dereference_key_locked(key); |
| if (epayload->decrypted_datalen != NVDIMM_PASSPHRASE_LEN) { |
| up_read(&key->sem); |
| key_put(key); |
| key = NULL; |
| } |
| return key; |
| } |
| |
| static const void *nvdimm_get_user_key_payload(struct nvdimm *nvdimm, |
| key_serial_t id, int subclass, struct key **key) |
| { |
| *key = NULL; |
| if (id == 0) { |
| if (subclass == NVDIMM_BASE_KEY) |
| return zero_key; |
| else |
| return NULL; |
| } |
| |
| *key = nvdimm_lookup_user_key(nvdimm, id, subclass); |
| if (!*key) |
| return NULL; |
| |
| return key_data(*key); |
| } |
| |
| |
| static int nvdimm_key_revalidate(struct nvdimm *nvdimm) |
| { |
| struct key *key; |
| int rc; |
| const void *data; |
| |
| if (!nvdimm->sec.ops->change_key) |
| return -EOPNOTSUPP; |
| |
| data = nvdimm_get_key_payload(nvdimm, &key); |
| |
| /* |
| * Send the same key to the hardware as new and old key to |
| * verify that the key is good. |
| */ |
| rc = nvdimm->sec.ops->change_key(nvdimm, data, data, NVDIMM_USER); |
| if (rc < 0) { |
| nvdimm_put_key(key); |
| return rc; |
| } |
| |
| nvdimm_put_key(key); |
| nvdimm->sec.flags = nvdimm_security_flags(nvdimm, NVDIMM_USER); |
| return 0; |
| } |
| |
| static int __nvdimm_security_unlock(struct nvdimm *nvdimm) |
| { |
| struct device *dev = &nvdimm->dev; |
| struct nvdimm_bus *nvdimm_bus = walk_to_nvdimm_bus(dev); |
| struct key *key; |
| const void *data; |
| int rc; |
| |
| /* The bus lock should be held at the top level of the call stack */ |
| lockdep_assert_held(&nvdimm_bus->reconfig_mutex); |
| |
| if (!nvdimm->sec.ops || !nvdimm->sec.ops->unlock |
| || !nvdimm->sec.flags) |
| return -EIO; |
| |
| /* No need to go further if security is disabled */ |
| if (test_bit(NVDIMM_SECURITY_DISABLED, &nvdimm->sec.flags)) |
| return 0; |
| |
| if (test_bit(NDD_SECURITY_OVERWRITE, &nvdimm->flags)) { |
| dev_dbg(dev, "Security operation in progress.\n"); |
| return -EBUSY; |
| } |
| |
| /* |
| * If the pre-OS has unlocked the DIMM, attempt to send the key |
| * from request_key() to the hardware for verification. Failure |
| * to revalidate the key against the hardware results in a |
| * freeze of the security configuration. I.e. if the OS does not |
| * have the key, security is being managed pre-OS. |
| */ |
| if (test_bit(NVDIMM_SECURITY_UNLOCKED, &nvdimm->sec.flags)) { |
| if (!key_revalidate) |
| return 0; |
| |
| return nvdimm_key_revalidate(nvdimm); |
| } else |
| data = nvdimm_get_key_payload(nvdimm, &key); |
| |
| rc = nvdimm->sec.ops->unlock(nvdimm, data); |
| dev_dbg(dev, "key: %d unlock: %s\n", key_serial(key), |
| rc == 0 ? "success" : "fail"); |
| |
| nvdimm_put_key(key); |
| nvdimm->sec.flags = nvdimm_security_flags(nvdimm, NVDIMM_USER); |
| return rc; |
| } |
| |
| int nvdimm_security_unlock(struct device *dev) |
| { |
| struct nvdimm *nvdimm = to_nvdimm(dev); |
| int rc; |
| |
| nvdimm_bus_lock(dev); |
| rc = __nvdimm_security_unlock(nvdimm); |
| nvdimm_bus_unlock(dev); |
| return rc; |
| } |
| |
| static int check_security_state(struct nvdimm *nvdimm) |
| { |
| struct device *dev = &nvdimm->dev; |
| |
| if (test_bit(NVDIMM_SECURITY_FROZEN, &nvdimm->sec.flags)) { |
| dev_dbg(dev, "Incorrect security state: %#lx\n", |
| nvdimm->sec.flags); |
| return -EIO; |
| } |
| |
| if (test_bit(NDD_SECURITY_OVERWRITE, &nvdimm->flags)) { |
| dev_dbg(dev, "Security operation in progress.\n"); |
| return -EBUSY; |
| } |
| |
| return 0; |
| } |
| |
| static int security_disable(struct nvdimm *nvdimm, unsigned int keyid) |
| { |
| struct device *dev = &nvdimm->dev; |
| struct nvdimm_bus *nvdimm_bus = walk_to_nvdimm_bus(dev); |
| struct key *key; |
| int rc; |
| const void *data; |
| |
| /* The bus lock should be held at the top level of the call stack */ |
| lockdep_assert_held(&nvdimm_bus->reconfig_mutex); |
| |
| if (!nvdimm->sec.ops || !nvdimm->sec.ops->disable |
| || !nvdimm->sec.flags) |
| return -EOPNOTSUPP; |
| |
| rc = check_security_state(nvdimm); |
| if (rc) |
| return rc; |
| |
| data = nvdimm_get_user_key_payload(nvdimm, keyid, |
| NVDIMM_BASE_KEY, &key); |
| if (!data) |
| return -ENOKEY; |
| |
| rc = nvdimm->sec.ops->disable(nvdimm, data); |
| dev_dbg(dev, "key: %d disable: %s\n", key_serial(key), |
| rc == 0 ? "success" : "fail"); |
| |
| nvdimm_put_key(key); |
| nvdimm->sec.flags = nvdimm_security_flags(nvdimm, NVDIMM_USER); |
| return rc; |
| } |
| |
| static int security_update(struct nvdimm *nvdimm, unsigned int keyid, |
| unsigned int new_keyid, |
| enum nvdimm_passphrase_type pass_type) |
| { |
| struct device *dev = &nvdimm->dev; |
| struct nvdimm_bus *nvdimm_bus = walk_to_nvdimm_bus(dev); |
| struct key *key, *newkey; |
| int rc; |
| const void *data, *newdata; |
| |
| /* The bus lock should be held at the top level of the call stack */ |
| lockdep_assert_held(&nvdimm_bus->reconfig_mutex); |
| |
| if (!nvdimm->sec.ops || !nvdimm->sec.ops->change_key |
| || !nvdimm->sec.flags) |
| return -EOPNOTSUPP; |
| |
| rc = check_security_state(nvdimm); |
| if (rc) |
| return rc; |
| |
| data = nvdimm_get_user_key_payload(nvdimm, keyid, |
| NVDIMM_BASE_KEY, &key); |
| if (!data) |
| return -ENOKEY; |
| |
| newdata = nvdimm_get_user_key_payload(nvdimm, new_keyid, |
| NVDIMM_NEW_KEY, &newkey); |
| if (!newdata) { |
| nvdimm_put_key(key); |
| return -ENOKEY; |
| } |
| |
| rc = nvdimm->sec.ops->change_key(nvdimm, data, newdata, pass_type); |
| dev_dbg(dev, "key: %d %d update%s: %s\n", |
| key_serial(key), key_serial(newkey), |
| pass_type == NVDIMM_MASTER ? "(master)" : "(user)", |
| rc == 0 ? "success" : "fail"); |
| |
| nvdimm_put_key(newkey); |
| nvdimm_put_key(key); |
| if (pass_type == NVDIMM_MASTER) |
| nvdimm->sec.ext_flags = nvdimm_security_flags(nvdimm, |
| NVDIMM_MASTER); |
| else |
| nvdimm->sec.flags = nvdimm_security_flags(nvdimm, |
| NVDIMM_USER); |
| return rc; |
| } |
| |
| static int security_erase(struct nvdimm *nvdimm, unsigned int keyid, |
| enum nvdimm_passphrase_type pass_type) |
| { |
| struct device *dev = &nvdimm->dev; |
| struct nvdimm_bus *nvdimm_bus = walk_to_nvdimm_bus(dev); |
| struct key *key = NULL; |
| int rc; |
| const void *data; |
| |
| /* The bus lock should be held at the top level of the call stack */ |
| lockdep_assert_held(&nvdimm_bus->reconfig_mutex); |
| |
| if (!nvdimm->sec.ops || !nvdimm->sec.ops->erase |
| || !nvdimm->sec.flags) |
| return -EOPNOTSUPP; |
| |
| rc = check_security_state(nvdimm); |
| if (rc) |
| return rc; |
| |
| if (!test_bit(NVDIMM_SECURITY_UNLOCKED, &nvdimm->sec.ext_flags) |
| && pass_type == NVDIMM_MASTER) { |
| dev_dbg(dev, |
| "Attempt to secure erase in wrong master state.\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| data = nvdimm_get_user_key_payload(nvdimm, keyid, |
| NVDIMM_BASE_KEY, &key); |
| if (!data) |
| return -ENOKEY; |
| |
| rc = nvdimm->sec.ops->erase(nvdimm, data, pass_type); |
| dev_dbg(dev, "key: %d erase%s: %s\n", key_serial(key), |
| pass_type == NVDIMM_MASTER ? "(master)" : "(user)", |
| rc == 0 ? "success" : "fail"); |
| |
| nvdimm_put_key(key); |
| nvdimm->sec.flags = nvdimm_security_flags(nvdimm, NVDIMM_USER); |
| return rc; |
| } |
| |
| static int security_overwrite(struct nvdimm *nvdimm, unsigned int keyid) |
| { |
| struct device *dev = &nvdimm->dev; |
| struct nvdimm_bus *nvdimm_bus = walk_to_nvdimm_bus(dev); |
| struct key *key = NULL; |
| int rc; |
| const void *data; |
| |
| /* The bus lock should be held at the top level of the call stack */ |
| lockdep_assert_held(&nvdimm_bus->reconfig_mutex); |
| |
| if (!nvdimm->sec.ops || !nvdimm->sec.ops->overwrite |
| || !nvdimm->sec.flags) |
| return -EOPNOTSUPP; |
| |
| if (dev->driver == NULL) { |
| dev_dbg(dev, "Unable to overwrite while DIMM active.\n"); |
| return -EINVAL; |
| } |
| |
| rc = check_security_state(nvdimm); |
| if (rc) |
| return rc; |
| |
| data = nvdimm_get_user_key_payload(nvdimm, keyid, |
| NVDIMM_BASE_KEY, &key); |
| if (!data) |
| return -ENOKEY; |
| |
| rc = nvdimm->sec.ops->overwrite(nvdimm, data); |
| dev_dbg(dev, "key: %d overwrite submission: %s\n", key_serial(key), |
| rc == 0 ? "success" : "fail"); |
| |
| nvdimm_put_key(key); |
| if (rc == 0) { |
| set_bit(NDD_SECURITY_OVERWRITE, &nvdimm->flags); |
| set_bit(NDD_WORK_PENDING, &nvdimm->flags); |
| set_bit(NVDIMM_SECURITY_OVERWRITE, &nvdimm->sec.flags); |
| /* |
| * Make sure we don't lose device while doing overwrite |
| * query. |
| */ |
| get_device(dev); |
| queue_delayed_work(system_wq, &nvdimm->dwork, 0); |
| } |
| |
| return rc; |
| } |
| |
| void __nvdimm_security_overwrite_query(struct nvdimm *nvdimm) |
| { |
| struct nvdimm_bus *nvdimm_bus = walk_to_nvdimm_bus(&nvdimm->dev); |
| int rc; |
| unsigned int tmo; |
| |
| /* The bus lock should be held at the top level of the call stack */ |
| lockdep_assert_held(&nvdimm_bus->reconfig_mutex); |
| |
| /* |
| * Abort and release device if we no longer have the overwrite |
| * flag set. It means the work has been canceled. |
| */ |
| if (!test_bit(NDD_WORK_PENDING, &nvdimm->flags)) |
| return; |
| |
| tmo = nvdimm->sec.overwrite_tmo; |
| |
| if (!nvdimm->sec.ops || !nvdimm->sec.ops->query_overwrite |
| || !nvdimm->sec.flags) |
| return; |
| |
| rc = nvdimm->sec.ops->query_overwrite(nvdimm); |
| if (rc == -EBUSY) { |
| |
| /* setup delayed work again */ |
| tmo += 10; |
| queue_delayed_work(system_wq, &nvdimm->dwork, tmo * HZ); |
| nvdimm->sec.overwrite_tmo = min(15U * 60U, tmo); |
| return; |
| } |
| |
| if (rc < 0) |
| dev_dbg(&nvdimm->dev, "overwrite failed\n"); |
| else |
| dev_dbg(&nvdimm->dev, "overwrite completed\n"); |
| |
| /* |
| * Mark the overwrite work done and update dimm security flags, |
| * then send a sysfs event notification to wake up userspace |
| * poll threads to picked up the changed state. |
| */ |
| nvdimm->sec.overwrite_tmo = 0; |
| clear_bit(NDD_SECURITY_OVERWRITE, &nvdimm->flags); |
| clear_bit(NDD_WORK_PENDING, &nvdimm->flags); |
| nvdimm->sec.flags = nvdimm_security_flags(nvdimm, NVDIMM_USER); |
| nvdimm->sec.ext_flags = nvdimm_security_flags(nvdimm, NVDIMM_MASTER); |
| if (nvdimm->sec.overwrite_state) |
| sysfs_notify_dirent(nvdimm->sec.overwrite_state); |
| put_device(&nvdimm->dev); |
| } |
| |
| void nvdimm_security_overwrite_query(struct work_struct *work) |
| { |
| struct nvdimm *nvdimm = |
| container_of(work, typeof(*nvdimm), dwork.work); |
| |
| nvdimm_bus_lock(&nvdimm->dev); |
| __nvdimm_security_overwrite_query(nvdimm); |
| nvdimm_bus_unlock(&nvdimm->dev); |
| } |
| |
| #define OPS \ |
| C( OP_FREEZE, "freeze", 1), \ |
| C( OP_DISABLE, "disable", 2), \ |
| C( OP_UPDATE, "update", 3), \ |
| C( OP_ERASE, "erase", 2), \ |
| C( OP_OVERWRITE, "overwrite", 2), \ |
| C( OP_MASTER_UPDATE, "master_update", 3), \ |
| C( OP_MASTER_ERASE, "master_erase", 2) |
| #undef C |
| #define C(a, b, c) a |
| enum nvdimmsec_op_ids { OPS }; |
| #undef C |
| #define C(a, b, c) { b, c } |
| static struct { |
| const char *name; |
| int args; |
| } ops[] = { OPS }; |
| #undef C |
| |
| #define SEC_CMD_SIZE 32 |
| #define KEY_ID_SIZE 10 |
| |
| ssize_t nvdimm_security_store(struct device *dev, const char *buf, size_t len) |
| { |
| struct nvdimm *nvdimm = to_nvdimm(dev); |
| ssize_t rc; |
| char cmd[SEC_CMD_SIZE+1], keystr[KEY_ID_SIZE+1], |
| nkeystr[KEY_ID_SIZE+1]; |
| unsigned int key, newkey; |
| int i; |
| |
| rc = sscanf(buf, "%"__stringify(SEC_CMD_SIZE)"s" |
| " %"__stringify(KEY_ID_SIZE)"s" |
| " %"__stringify(KEY_ID_SIZE)"s", |
| cmd, keystr, nkeystr); |
| if (rc < 1) |
| return -EINVAL; |
| for (i = 0; i < ARRAY_SIZE(ops); i++) |
| if (sysfs_streq(cmd, ops[i].name)) |
| break; |
| if (i >= ARRAY_SIZE(ops)) |
| return -EINVAL; |
| if (ops[i].args > 1) |
| rc = kstrtouint(keystr, 0, &key); |
| if (rc >= 0 && ops[i].args > 2) |
| rc = kstrtouint(nkeystr, 0, &newkey); |
| if (rc < 0) |
| return rc; |
| |
| if (i == OP_FREEZE) { |
| dev_dbg(dev, "freeze\n"); |
| rc = nvdimm_security_freeze(nvdimm); |
| } else if (i == OP_DISABLE) { |
| dev_dbg(dev, "disable %u\n", key); |
| rc = security_disable(nvdimm, key); |
| } else if (i == OP_UPDATE || i == OP_MASTER_UPDATE) { |
| dev_dbg(dev, "%s %u %u\n", ops[i].name, key, newkey); |
| rc = security_update(nvdimm, key, newkey, i == OP_UPDATE |
| ? NVDIMM_USER : NVDIMM_MASTER); |
| } else if (i == OP_ERASE || i == OP_MASTER_ERASE) { |
| dev_dbg(dev, "%s %u\n", ops[i].name, key); |
| if (atomic_read(&nvdimm->busy)) { |
| dev_dbg(dev, "Unable to secure erase while DIMM active.\n"); |
| return -EBUSY; |
| } |
| rc = security_erase(nvdimm, key, i == OP_ERASE |
| ? NVDIMM_USER : NVDIMM_MASTER); |
| } else if (i == OP_OVERWRITE) { |
| dev_dbg(dev, "overwrite %u\n", key); |
| if (atomic_read(&nvdimm->busy)) { |
| dev_dbg(dev, "Unable to overwrite while DIMM active.\n"); |
| return -EBUSY; |
| } |
| rc = security_overwrite(nvdimm, key); |
| } else |
| return -EINVAL; |
| |
| if (rc == 0) |
| rc = len; |
| return rc; |
| } |