| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Synopsys DesignWare PCIe host controller driver |
| * |
| * Copyright (C) 2013 Samsung Electronics Co., Ltd. |
| * https://www.samsung.com |
| * |
| * Author: Jingoo Han <jg1.han@samsung.com> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/types.h> |
| |
| #include "../../pci.h" |
| #include "pcie-designware.h" |
| |
| /* |
| * These interfaces resemble the pci_find_*capability() interfaces, but these |
| * are for configuring host controllers, which are bridges *to* PCI devices but |
| * are not PCI devices themselves. |
| */ |
| static u8 __dw_pcie_find_next_cap(struct dw_pcie *pci, u8 cap_ptr, |
| u8 cap) |
| { |
| u8 cap_id, next_cap_ptr; |
| u16 reg; |
| |
| if (!cap_ptr) |
| return 0; |
| |
| reg = dw_pcie_readw_dbi(pci, cap_ptr); |
| cap_id = (reg & 0x00ff); |
| |
| if (cap_id > PCI_CAP_ID_MAX) |
| return 0; |
| |
| if (cap_id == cap) |
| return cap_ptr; |
| |
| next_cap_ptr = (reg & 0xff00) >> 8; |
| return __dw_pcie_find_next_cap(pci, next_cap_ptr, cap); |
| } |
| |
| u8 dw_pcie_find_capability(struct dw_pcie *pci, u8 cap) |
| { |
| u8 next_cap_ptr; |
| u16 reg; |
| |
| reg = dw_pcie_readw_dbi(pci, PCI_CAPABILITY_LIST); |
| next_cap_ptr = (reg & 0x00ff); |
| |
| return __dw_pcie_find_next_cap(pci, next_cap_ptr, cap); |
| } |
| EXPORT_SYMBOL_GPL(dw_pcie_find_capability); |
| |
| static u16 dw_pcie_find_next_ext_capability(struct dw_pcie *pci, u16 start, |
| u8 cap) |
| { |
| u32 header; |
| int ttl; |
| int pos = PCI_CFG_SPACE_SIZE; |
| |
| /* minimum 8 bytes per capability */ |
| ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8; |
| |
| if (start) |
| pos = start; |
| |
| header = dw_pcie_readl_dbi(pci, pos); |
| /* |
| * If we have no capabilities, this is indicated by cap ID, |
| * cap version and next pointer all being 0. |
| */ |
| if (header == 0) |
| return 0; |
| |
| while (ttl-- > 0) { |
| if (PCI_EXT_CAP_ID(header) == cap && pos != start) |
| return pos; |
| |
| pos = PCI_EXT_CAP_NEXT(header); |
| if (pos < PCI_CFG_SPACE_SIZE) |
| break; |
| |
| header = dw_pcie_readl_dbi(pci, pos); |
| } |
| |
| return 0; |
| } |
| |
| u16 dw_pcie_find_ext_capability(struct dw_pcie *pci, u8 cap) |
| { |
| return dw_pcie_find_next_ext_capability(pci, 0, cap); |
| } |
| EXPORT_SYMBOL_GPL(dw_pcie_find_ext_capability); |
| |
| int dw_pcie_read(void __iomem *addr, int size, u32 *val) |
| { |
| if (!IS_ALIGNED((uintptr_t)addr, size)) { |
| *val = 0; |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| } |
| |
| if (size == 4) { |
| *val = readl(addr); |
| } else if (size == 2) { |
| *val = readw(addr); |
| } else if (size == 1) { |
| *val = readb(addr); |
| } else { |
| *val = 0; |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| } |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| EXPORT_SYMBOL_GPL(dw_pcie_read); |
| |
| int dw_pcie_write(void __iomem *addr, int size, u32 val) |
| { |
| if (!IS_ALIGNED((uintptr_t)addr, size)) |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| |
| if (size == 4) |
| writel(val, addr); |
| else if (size == 2) |
| writew(val, addr); |
| else if (size == 1) |
| writeb(val, addr); |
| else |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| EXPORT_SYMBOL_GPL(dw_pcie_write); |
| |
| u32 dw_pcie_read_dbi(struct dw_pcie *pci, u32 reg, size_t size) |
| { |
| int ret; |
| u32 val; |
| |
| if (pci->ops && pci->ops->read_dbi) |
| return pci->ops->read_dbi(pci, pci->dbi_base, reg, size); |
| |
| ret = dw_pcie_read(pci->dbi_base + reg, size, &val); |
| if (ret) |
| dev_err(pci->dev, "Read DBI address failed\n"); |
| |
| return val; |
| } |
| EXPORT_SYMBOL_GPL(dw_pcie_read_dbi); |
| |
| void dw_pcie_write_dbi(struct dw_pcie *pci, u32 reg, size_t size, u32 val) |
| { |
| int ret; |
| |
| if (pci->ops && pci->ops->write_dbi) { |
| pci->ops->write_dbi(pci, pci->dbi_base, reg, size, val); |
| return; |
| } |
| |
| ret = dw_pcie_write(pci->dbi_base + reg, size, val); |
| if (ret) |
| dev_err(pci->dev, "Write DBI address failed\n"); |
| } |
| EXPORT_SYMBOL_GPL(dw_pcie_write_dbi); |
| |
| void dw_pcie_write_dbi2(struct dw_pcie *pci, u32 reg, size_t size, u32 val) |
| { |
| int ret; |
| |
| if (pci->ops && pci->ops->write_dbi2) { |
| pci->ops->write_dbi2(pci, pci->dbi_base2, reg, size, val); |
| return; |
| } |
| |
| ret = dw_pcie_write(pci->dbi_base2 + reg, size, val); |
| if (ret) |
| dev_err(pci->dev, "write DBI address failed\n"); |
| } |
| |
| static u32 dw_pcie_readl_atu(struct dw_pcie *pci, u32 reg) |
| { |
| int ret; |
| u32 val; |
| |
| if (pci->ops && pci->ops->read_dbi) |
| return pci->ops->read_dbi(pci, pci->atu_base, reg, 4); |
| |
| ret = dw_pcie_read(pci->atu_base + reg, 4, &val); |
| if (ret) |
| dev_err(pci->dev, "Read ATU address failed\n"); |
| |
| return val; |
| } |
| |
| static void dw_pcie_writel_atu(struct dw_pcie *pci, u32 reg, u32 val) |
| { |
| int ret; |
| |
| if (pci->ops && pci->ops->write_dbi) { |
| pci->ops->write_dbi(pci, pci->atu_base, reg, 4, val); |
| return; |
| } |
| |
| ret = dw_pcie_write(pci->atu_base + reg, 4, val); |
| if (ret) |
| dev_err(pci->dev, "Write ATU address failed\n"); |
| } |
| |
| static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg) |
| { |
| u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index); |
| |
| return dw_pcie_readl_atu(pci, offset + reg); |
| } |
| |
| static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg, |
| u32 val) |
| { |
| u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index); |
| |
| dw_pcie_writel_atu(pci, offset + reg, val); |
| } |
| |
| static inline u32 dw_pcie_enable_ecrc(u32 val) |
| { |
| /* |
| * DesignWare core version 4.90A has a design issue where the 'TD' |
| * bit in the Control register-1 of the ATU outbound region acts |
| * like an override for the ECRC setting, i.e., the presence of TLP |
| * Digest (ECRC) in the outgoing TLPs is solely determined by this |
| * bit. This is contrary to the PCIe spec which says that the |
| * enablement of the ECRC is solely determined by the AER |
| * registers. |
| * |
| * Because of this, even when the ECRC is enabled through AER |
| * registers, the transactions going through ATU won't have TLP |
| * Digest as there is no way the PCI core AER code could program |
| * the TD bit which is specific to the DesignWare core. |
| * |
| * The best way to handle this scenario is to program the TD bit |
| * always. It affects only the traffic from root port to downstream |
| * devices. |
| * |
| * At this point, |
| * When ECRC is enabled in AER registers, everything works normally |
| * When ECRC is NOT enabled in AER registers, then, |
| * on Root Port:- TLP Digest (DWord size) gets appended to each packet |
| * even through it is not required. Since downstream |
| * TLPs are mostly for configuration accesses and BAR |
| * accesses, they are not in critical path and won't |
| * have much negative effect on the performance. |
| * on End Point:- TLP Digest is received for some/all the packets coming |
| * from the root port. TLP Digest is ignored because, |
| * as per the PCIe Spec r5.0 v1.0 section 2.2.3 |
| * "TLP Digest Rules", when an endpoint receives TLP |
| * Digest when its ECRC check functionality is disabled |
| * in AER registers, received TLP Digest is just ignored. |
| * Since there is no issue or error reported either side, best way to |
| * handle the scenario is to program TD bit by default. |
| */ |
| |
| return val | PCIE_ATU_TD; |
| } |
| |
| static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no, |
| int index, int type, |
| u64 cpu_addr, u64 pci_addr, |
| u64 size) |
| { |
| u32 retries, val; |
| u64 limit_addr = cpu_addr + size - 1; |
| |
| dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE, |
| lower_32_bits(cpu_addr)); |
| dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE, |
| upper_32_bits(cpu_addr)); |
| dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_LIMIT, |
| lower_32_bits(limit_addr)); |
| dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_LIMIT, |
| upper_32_bits(limit_addr)); |
| dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET, |
| lower_32_bits(pci_addr)); |
| dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET, |
| upper_32_bits(pci_addr)); |
| val = type | PCIE_ATU_FUNC_NUM(func_no); |
| val = upper_32_bits(size - 1) ? |
| val | PCIE_ATU_INCREASE_REGION_SIZE : val; |
| if (pci->version == 0x490A) |
| val = dw_pcie_enable_ecrc(val); |
| dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, val); |
| dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2, |
| PCIE_ATU_ENABLE); |
| |
| /* |
| * Make sure ATU enable takes effect before any subsequent config |
| * and I/O accesses. |
| */ |
| for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) { |
| val = dw_pcie_readl_ob_unroll(pci, index, |
| PCIE_ATU_UNR_REGION_CTRL2); |
| if (val & PCIE_ATU_ENABLE) |
| return; |
| |
| mdelay(LINK_WAIT_IATU); |
| } |
| dev_err(pci->dev, "Outbound iATU is not being enabled\n"); |
| } |
| |
| static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, |
| int index, int type, u64 cpu_addr, |
| u64 pci_addr, u64 size) |
| { |
| u32 retries, val; |
| |
| if (pci->ops && pci->ops->cpu_addr_fixup) |
| cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr); |
| |
| if (pci->iatu_unroll_enabled) { |
| dw_pcie_prog_outbound_atu_unroll(pci, func_no, index, type, |
| cpu_addr, pci_addr, size); |
| return; |
| } |
| |
| dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, |
| PCIE_ATU_REGION_OUTBOUND | index); |
| dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE, |
| lower_32_bits(cpu_addr)); |
| dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE, |
| upper_32_bits(cpu_addr)); |
| dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT, |
| lower_32_bits(cpu_addr + size - 1)); |
| if (pci->version >= 0x460A) |
| dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_LIMIT, |
| upper_32_bits(cpu_addr + size - 1)); |
| dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET, |
| lower_32_bits(pci_addr)); |
| dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, |
| upper_32_bits(pci_addr)); |
| val = type | PCIE_ATU_FUNC_NUM(func_no); |
| val = ((upper_32_bits(size - 1)) && (pci->version >= 0x460A)) ? |
| val | PCIE_ATU_INCREASE_REGION_SIZE : val; |
| if (pci->version == 0x490A) |
| val = dw_pcie_enable_ecrc(val); |
| dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val); |
| dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE); |
| |
| /* |
| * Make sure ATU enable takes effect before any subsequent config |
| * and I/O accesses. |
| */ |
| for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) { |
| val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2); |
| if (val & PCIE_ATU_ENABLE) |
| return; |
| |
| mdelay(LINK_WAIT_IATU); |
| } |
| dev_err(pci->dev, "Outbound iATU is not being enabled\n"); |
| } |
| |
| void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type, |
| u64 cpu_addr, u64 pci_addr, u64 size) |
| { |
| __dw_pcie_prog_outbound_atu(pci, 0, index, type, |
| cpu_addr, pci_addr, size); |
| } |
| |
| void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index, |
| int type, u64 cpu_addr, u64 pci_addr, |
| u64 size) |
| { |
| __dw_pcie_prog_outbound_atu(pci, func_no, index, type, |
| cpu_addr, pci_addr, size); |
| } |
| |
| static u32 dw_pcie_readl_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg) |
| { |
| u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index); |
| |
| return dw_pcie_readl_atu(pci, offset + reg); |
| } |
| |
| static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg, |
| u32 val) |
| { |
| u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index); |
| |
| dw_pcie_writel_atu(pci, offset + reg, val); |
| } |
| |
| static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, u8 func_no, |
| int index, int bar, u64 cpu_addr, |
| enum dw_pcie_as_type as_type) |
| { |
| int type; |
| u32 retries, val; |
| |
| dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET, |
| lower_32_bits(cpu_addr)); |
| dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET, |
| upper_32_bits(cpu_addr)); |
| |
| switch (as_type) { |
| case DW_PCIE_AS_MEM: |
| type = PCIE_ATU_TYPE_MEM; |
| break; |
| case DW_PCIE_AS_IO: |
| type = PCIE_ATU_TYPE_IO; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, type | |
| PCIE_ATU_FUNC_NUM(func_no)); |
| dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2, |
| PCIE_ATU_FUNC_NUM_MATCH_EN | |
| PCIE_ATU_ENABLE | |
| PCIE_ATU_BAR_MODE_ENABLE | (bar << 8)); |
| |
| /* |
| * Make sure ATU enable takes effect before any subsequent config |
| * and I/O accesses. |
| */ |
| for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) { |
| val = dw_pcie_readl_ib_unroll(pci, index, |
| PCIE_ATU_UNR_REGION_CTRL2); |
| if (val & PCIE_ATU_ENABLE) |
| return 0; |
| |
| mdelay(LINK_WAIT_IATU); |
| } |
| dev_err(pci->dev, "Inbound iATU is not being enabled\n"); |
| |
| return -EBUSY; |
| } |
| |
| int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index, |
| int bar, u64 cpu_addr, |
| enum dw_pcie_as_type as_type) |
| { |
| int type; |
| u32 retries, val; |
| |
| if (pci->iatu_unroll_enabled) |
| return dw_pcie_prog_inbound_atu_unroll(pci, func_no, index, bar, |
| cpu_addr, as_type); |
| |
| dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, PCIE_ATU_REGION_INBOUND | |
| index); |
| dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET, lower_32_bits(cpu_addr)); |
| dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, upper_32_bits(cpu_addr)); |
| |
| switch (as_type) { |
| case DW_PCIE_AS_MEM: |
| type = PCIE_ATU_TYPE_MEM; |
| break; |
| case DW_PCIE_AS_IO: |
| type = PCIE_ATU_TYPE_IO; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type | |
| PCIE_ATU_FUNC_NUM(func_no)); |
| dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE | |
| PCIE_ATU_FUNC_NUM_MATCH_EN | |
| PCIE_ATU_BAR_MODE_ENABLE | (bar << 8)); |
| |
| /* |
| * Make sure ATU enable takes effect before any subsequent config |
| * and I/O accesses. |
| */ |
| for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) { |
| val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2); |
| if (val & PCIE_ATU_ENABLE) |
| return 0; |
| |
| mdelay(LINK_WAIT_IATU); |
| } |
| dev_err(pci->dev, "Inbound iATU is not being enabled\n"); |
| |
| return -EBUSY; |
| } |
| |
| void dw_pcie_disable_atu(struct dw_pcie *pci, int index, |
| enum dw_pcie_region_type type) |
| { |
| int region; |
| |
| switch (type) { |
| case DW_PCIE_REGION_INBOUND: |
| region = PCIE_ATU_REGION_INBOUND; |
| break; |
| case DW_PCIE_REGION_OUTBOUND: |
| region = PCIE_ATU_REGION_OUTBOUND; |
| break; |
| default: |
| return; |
| } |
| |
| dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, region | index); |
| dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, ~(u32)PCIE_ATU_ENABLE); |
| } |
| |
| int dw_pcie_wait_for_link(struct dw_pcie *pci) |
| { |
| int retries; |
| |
| /* Check if the link is up or not */ |
| for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) { |
| if (dw_pcie_link_up(pci)) { |
| dev_info(pci->dev, "Link up\n"); |
| return 0; |
| } |
| usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX); |
| } |
| |
| dev_info(pci->dev, "Phy link never came up\n"); |
| |
| return -ETIMEDOUT; |
| } |
| EXPORT_SYMBOL_GPL(dw_pcie_wait_for_link); |
| |
| int dw_pcie_link_up(struct dw_pcie *pci) |
| { |
| u32 val; |
| |
| if (pci->ops && pci->ops->link_up) |
| return pci->ops->link_up(pci); |
| |
| val = readl(pci->dbi_base + PCIE_PORT_DEBUG1); |
| return ((val & PCIE_PORT_DEBUG1_LINK_UP) && |
| (!(val & PCIE_PORT_DEBUG1_LINK_IN_TRAINING))); |
| } |
| |
| void dw_pcie_upconfig_setup(struct dw_pcie *pci) |
| { |
| u32 val; |
| |
| val = dw_pcie_readl_dbi(pci, PCIE_PORT_MULTI_LANE_CTRL); |
| val |= PORT_MLTI_UPCFG_SUPPORT; |
| dw_pcie_writel_dbi(pci, PCIE_PORT_MULTI_LANE_CTRL, val); |
| } |
| EXPORT_SYMBOL_GPL(dw_pcie_upconfig_setup); |
| |
| static void dw_pcie_link_set_max_speed(struct dw_pcie *pci, u32 link_gen) |
| { |
| u32 cap, ctrl2, link_speed; |
| u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); |
| |
| cap = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP); |
| ctrl2 = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCTL2); |
| ctrl2 &= ~PCI_EXP_LNKCTL2_TLS; |
| |
| switch (pcie_link_speed[link_gen]) { |
| case PCIE_SPEED_2_5GT: |
| link_speed = PCI_EXP_LNKCTL2_TLS_2_5GT; |
| break; |
| case PCIE_SPEED_5_0GT: |
| link_speed = PCI_EXP_LNKCTL2_TLS_5_0GT; |
| break; |
| case PCIE_SPEED_8_0GT: |
| link_speed = PCI_EXP_LNKCTL2_TLS_8_0GT; |
| break; |
| case PCIE_SPEED_16_0GT: |
| link_speed = PCI_EXP_LNKCTL2_TLS_16_0GT; |
| break; |
| default: |
| /* Use hardware capability */ |
| link_speed = FIELD_GET(PCI_EXP_LNKCAP_SLS, cap); |
| ctrl2 &= ~PCI_EXP_LNKCTL2_HASD; |
| break; |
| } |
| |
| dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCTL2, ctrl2 | link_speed); |
| |
| cap &= ~((u32)PCI_EXP_LNKCAP_SLS); |
| dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, cap | link_speed); |
| |
| } |
| |
| static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci) |
| { |
| u32 val; |
| |
| val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT); |
| if (val == 0xffffffff) |
| return 1; |
| |
| return 0; |
| } |
| |
| static void dw_pcie_iatu_detect_regions_unroll(struct dw_pcie *pci) |
| { |
| int max_region, i, ob = 0, ib = 0; |
| u32 val; |
| |
| max_region = min((int)pci->atu_size / 512, 256); |
| |
| for (i = 0; i < max_region; i++) { |
| dw_pcie_writel_ob_unroll(pci, i, PCIE_ATU_UNR_LOWER_TARGET, |
| 0x11110000); |
| |
| val = dw_pcie_readl_ob_unroll(pci, i, PCIE_ATU_UNR_LOWER_TARGET); |
| if (val == 0x11110000) |
| ob++; |
| else |
| break; |
| } |
| |
| for (i = 0; i < max_region; i++) { |
| dw_pcie_writel_ib_unroll(pci, i, PCIE_ATU_UNR_LOWER_TARGET, |
| 0x11110000); |
| |
| val = dw_pcie_readl_ib_unroll(pci, i, PCIE_ATU_UNR_LOWER_TARGET); |
| if (val == 0x11110000) |
| ib++; |
| else |
| break; |
| } |
| pci->num_ib_windows = ib; |
| pci->num_ob_windows = ob; |
| } |
| |
| static void dw_pcie_iatu_detect_regions(struct dw_pcie *pci) |
| { |
| int max_region, i, ob = 0, ib = 0; |
| u32 val; |
| |
| dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, 0xFF); |
| max_region = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT) + 1; |
| |
| for (i = 0; i < max_region; i++) { |
| dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, PCIE_ATU_REGION_OUTBOUND | i); |
| dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET, 0x11110000); |
| val = dw_pcie_readl_dbi(pci, PCIE_ATU_LOWER_TARGET); |
| if (val == 0x11110000) |
| ob++; |
| else |
| break; |
| } |
| |
| for (i = 0; i < max_region; i++) { |
| dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, PCIE_ATU_REGION_INBOUND | i); |
| dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET, 0x11110000); |
| val = dw_pcie_readl_dbi(pci, PCIE_ATU_LOWER_TARGET); |
| if (val == 0x11110000) |
| ib++; |
| else |
| break; |
| } |
| |
| pci->num_ib_windows = ib; |
| pci->num_ob_windows = ob; |
| } |
| |
| void dw_pcie_iatu_detect(struct dw_pcie *pci) |
| { |
| struct device *dev = pci->dev; |
| struct platform_device *pdev = to_platform_device(dev); |
| |
| if (pci->version >= 0x480A || (!pci->version && |
| dw_pcie_iatu_unroll_enabled(pci))) { |
| pci->iatu_unroll_enabled = true; |
| if (!pci->atu_base) { |
| struct resource *res = |
| platform_get_resource_byname(pdev, IORESOURCE_MEM, "atu"); |
| if (res) |
| pci->atu_size = resource_size(res); |
| pci->atu_base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(pci->atu_base)) |
| pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET; |
| } |
| |
| if (!pci->atu_size) |
| /* Pick a minimal default, enough for 8 in and 8 out windows */ |
| pci->atu_size = SZ_4K; |
| |
| dw_pcie_iatu_detect_regions_unroll(pci); |
| } else |
| dw_pcie_iatu_detect_regions(pci); |
| |
| dev_info(pci->dev, "iATU unroll: %s\n", pci->iatu_unroll_enabled ? |
| "enabled" : "disabled"); |
| |
| dev_info(pci->dev, "Detected iATU regions: %u outbound, %u inbound", |
| pci->num_ob_windows, pci->num_ib_windows); |
| } |
| |
| void dw_pcie_setup(struct dw_pcie *pci) |
| { |
| u32 val; |
| struct device *dev = pci->dev; |
| struct device_node *np = dev->of_node; |
| |
| if (pci->link_gen > 0) |
| dw_pcie_link_set_max_speed(pci, pci->link_gen); |
| |
| /* Configure Gen1 N_FTS */ |
| if (pci->n_fts[0]) { |
| val = dw_pcie_readl_dbi(pci, PCIE_PORT_AFR); |
| val &= ~(PORT_AFR_N_FTS_MASK | PORT_AFR_CC_N_FTS_MASK); |
| val |= PORT_AFR_N_FTS(pci->n_fts[0]); |
| val |= PORT_AFR_CC_N_FTS(pci->n_fts[0]); |
| dw_pcie_writel_dbi(pci, PCIE_PORT_AFR, val); |
| } |
| |
| /* Configure Gen2+ N_FTS */ |
| if (pci->n_fts[1]) { |
| val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); |
| val &= ~PORT_LOGIC_N_FTS_MASK; |
| val |= pci->n_fts[pci->link_gen - 1]; |
| dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val); |
| } |
| |
| val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL); |
| val &= ~PORT_LINK_FAST_LINK_MODE; |
| val |= PORT_LINK_DLL_LINK_EN; |
| dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val); |
| |
| of_property_read_u32(np, "num-lanes", &pci->num_lanes); |
| if (!pci->num_lanes) { |
| dev_dbg(pci->dev, "Using h/w default number of lanes\n"); |
| return; |
| } |
| |
| /* Set the number of lanes */ |
| val &= ~PORT_LINK_FAST_LINK_MODE; |
| val &= ~PORT_LINK_MODE_MASK; |
| switch (pci->num_lanes) { |
| case 1: |
| val |= PORT_LINK_MODE_1_LANES; |
| break; |
| case 2: |
| val |= PORT_LINK_MODE_2_LANES; |
| break; |
| case 4: |
| val |= PORT_LINK_MODE_4_LANES; |
| break; |
| case 8: |
| val |= PORT_LINK_MODE_8_LANES; |
| break; |
| default: |
| dev_err(pci->dev, "num-lanes %u: invalid value\n", pci->num_lanes); |
| return; |
| } |
| dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val); |
| |
| /* Set link width speed control register */ |
| val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); |
| val &= ~PORT_LOGIC_LINK_WIDTH_MASK; |
| switch (pci->num_lanes) { |
| case 1: |
| val |= PORT_LOGIC_LINK_WIDTH_1_LANES; |
| break; |
| case 2: |
| val |= PORT_LOGIC_LINK_WIDTH_2_LANES; |
| break; |
| case 4: |
| val |= PORT_LOGIC_LINK_WIDTH_4_LANES; |
| break; |
| case 8: |
| val |= PORT_LOGIC_LINK_WIDTH_8_LANES; |
| break; |
| } |
| dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val); |
| |
| if (of_property_read_bool(np, "snps,enable-cdm-check")) { |
| val = dw_pcie_readl_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS); |
| val |= PCIE_PL_CHK_REG_CHK_REG_CONTINUOUS | |
| PCIE_PL_CHK_REG_CHK_REG_START; |
| dw_pcie_writel_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS, val); |
| } |
| } |