| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Qualcomm A53 PLL driver |
| * |
| * Copyright (c) 2017, Linaro Limited |
| * Author: Georgi Djakov <georgi.djakov@linaro.org> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_opp.h> |
| #include <linux/regmap.h> |
| #include <linux/module.h> |
| |
| #include "clk-pll.h" |
| #include "clk-regmap.h" |
| |
| static const struct pll_freq_tbl a53pll_freq[] = { |
| { 998400000, 52, 0x0, 0x1, 0 }, |
| { 1094400000, 57, 0x0, 0x1, 0 }, |
| { 1152000000, 62, 0x0, 0x1, 0 }, |
| { 1209600000, 63, 0x0, 0x1, 0 }, |
| { 1248000000, 65, 0x0, 0x1, 0 }, |
| { 1363200000, 71, 0x0, 0x1, 0 }, |
| { 1401600000, 73, 0x0, 0x1, 0 }, |
| { } |
| }; |
| |
| static const struct regmap_config a53pll_regmap_config = { |
| .reg_bits = 32, |
| .reg_stride = 4, |
| .val_bits = 32, |
| .max_register = 0x40, |
| .fast_io = true, |
| }; |
| |
| static struct pll_freq_tbl *qcom_a53pll_get_freq_tbl(struct device *dev) |
| { |
| struct pll_freq_tbl *freq_tbl; |
| unsigned long xo_freq; |
| unsigned long freq; |
| struct clk *xo_clk; |
| int count; |
| int ret; |
| int i; |
| |
| xo_clk = devm_clk_get(dev, "xo"); |
| if (IS_ERR(xo_clk)) |
| return NULL; |
| |
| xo_freq = clk_get_rate(xo_clk); |
| |
| ret = devm_pm_opp_of_add_table(dev); |
| if (ret) |
| return NULL; |
| |
| count = dev_pm_opp_get_opp_count(dev); |
| if (count <= 0) |
| return NULL; |
| |
| freq_tbl = devm_kcalloc(dev, count + 1, sizeof(*freq_tbl), GFP_KERNEL); |
| if (!freq_tbl) |
| return NULL; |
| |
| for (i = 0, freq = 0; i < count; i++, freq++) { |
| struct dev_pm_opp *opp; |
| |
| opp = dev_pm_opp_find_freq_ceil(dev, &freq); |
| if (IS_ERR(opp)) |
| return NULL; |
| |
| /* Skip the freq that is not divisible */ |
| if (freq % xo_freq) |
| continue; |
| |
| freq_tbl[i].freq = freq; |
| freq_tbl[i].l = freq / xo_freq; |
| freq_tbl[i].n = 1; |
| |
| dev_pm_opp_put(opp); |
| } |
| |
| return freq_tbl; |
| } |
| |
| static int qcom_a53pll_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| struct regmap *regmap; |
| struct clk_pll *pll; |
| void __iomem *base; |
| struct clk_init_data init = { }; |
| int ret; |
| |
| pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL); |
| if (!pll) |
| return -ENOMEM; |
| |
| base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| regmap = devm_regmap_init_mmio(dev, base, &a53pll_regmap_config); |
| if (IS_ERR(regmap)) |
| return PTR_ERR(regmap); |
| |
| pll->l_reg = 0x04; |
| pll->m_reg = 0x08; |
| pll->n_reg = 0x0c; |
| pll->config_reg = 0x14; |
| pll->mode_reg = 0x00; |
| pll->status_reg = 0x1c; |
| pll->status_bit = 16; |
| |
| pll->freq_tbl = qcom_a53pll_get_freq_tbl(dev); |
| if (!pll->freq_tbl) { |
| /* Fall on a53pll_freq if no freq_tbl is found from OPP */ |
| pll->freq_tbl = a53pll_freq; |
| } |
| |
| /* Use an unique name by appending @unit-address */ |
| init.name = devm_kasprintf(dev, GFP_KERNEL, "a53pll%s", |
| strchrnul(np->full_name, '@')); |
| if (!init.name) |
| return -ENOMEM; |
| |
| init.parent_data = &(const struct clk_parent_data){ |
| .fw_name = "xo", .name = "xo_board", |
| }; |
| init.num_parents = 1; |
| init.ops = &clk_pll_sr2_ops; |
| pll->clkr.hw.init = &init; |
| |
| ret = devm_clk_register_regmap(dev, &pll->clkr); |
| if (ret) { |
| dev_err(dev, "failed to register regmap clock: %d\n", ret); |
| return ret; |
| } |
| |
| ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, |
| &pll->clkr.hw); |
| if (ret) { |
| dev_err(dev, "failed to add clock provider: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct of_device_id qcom_a53pll_match_table[] = { |
| { .compatible = "qcom,msm8226-a7pll" }, |
| { .compatible = "qcom,msm8916-a53pll" }, |
| { .compatible = "qcom,msm8939-a53pll" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, qcom_a53pll_match_table); |
| |
| static struct platform_driver qcom_a53pll_driver = { |
| .probe = qcom_a53pll_probe, |
| .driver = { |
| .name = "qcom-a53pll", |
| .of_match_table = qcom_a53pll_match_table, |
| }, |
| }; |
| module_platform_driver(qcom_a53pll_driver); |
| |
| MODULE_DESCRIPTION("Qualcomm A53 PLL Driver"); |
| MODULE_LICENSE("GPL v2"); |