| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| * Author: Padmavathi Venna <padma.v@samsung.com> |
| * |
| * Common Clock Framework support for Audio Subsystem Clock Controller. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/io.h> |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/of.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| |
| #include <dt-bindings/clock/exynos-audss-clk.h> |
| |
| static DEFINE_SPINLOCK(lock); |
| static void __iomem *reg_base; |
| static struct clk_hw_onecell_data *clk_data; |
| /* |
| * On Exynos5420 this will be a clock which has to be enabled before any |
| * access to audss registers. Typically a child of EPLL. |
| * |
| * On other platforms this will be -ENODEV. |
| */ |
| static struct clk *epll; |
| |
| #define ASS_CLK_SRC 0x0 |
| #define ASS_CLK_DIV 0x4 |
| #define ASS_CLK_GATE 0x8 |
| |
| static unsigned long reg_save[][2] = { |
| { ASS_CLK_SRC, 0 }, |
| { ASS_CLK_DIV, 0 }, |
| { ASS_CLK_GATE, 0 }, |
| }; |
| |
| static int __maybe_unused exynos_audss_clk_suspend(struct device *dev) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(reg_save); i++) |
| reg_save[i][1] = readl(reg_base + reg_save[i][0]); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused exynos_audss_clk_resume(struct device *dev) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(reg_save); i++) |
| writel(reg_save[i][1], reg_base + reg_save[i][0]); |
| |
| return 0; |
| } |
| |
| struct exynos_audss_clk_drvdata { |
| unsigned int has_adma_clk:1; |
| unsigned int has_mst_clk:1; |
| unsigned int enable_epll:1; |
| unsigned int num_clks; |
| }; |
| |
| static const struct exynos_audss_clk_drvdata exynos4210_drvdata = { |
| .num_clks = EXYNOS_AUDSS_MAX_CLKS - 1, |
| .enable_epll = 1, |
| }; |
| |
| static const struct exynos_audss_clk_drvdata exynos5410_drvdata = { |
| .num_clks = EXYNOS_AUDSS_MAX_CLKS - 1, |
| .has_mst_clk = 1, |
| }; |
| |
| static const struct exynos_audss_clk_drvdata exynos5420_drvdata = { |
| .num_clks = EXYNOS_AUDSS_MAX_CLKS, |
| .has_adma_clk = 1, |
| .enable_epll = 1, |
| }; |
| |
| static const struct of_device_id exynos_audss_clk_of_match[] = { |
| { |
| .compatible = "samsung,exynos4210-audss-clock", |
| .data = &exynos4210_drvdata, |
| }, { |
| .compatible = "samsung,exynos5250-audss-clock", |
| .data = &exynos4210_drvdata, |
| }, { |
| .compatible = "samsung,exynos5410-audss-clock", |
| .data = &exynos5410_drvdata, |
| }, { |
| .compatible = "samsung,exynos5420-audss-clock", |
| .data = &exynos5420_drvdata, |
| }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, exynos_audss_clk_of_match); |
| |
| static void exynos_audss_clk_teardown(void) |
| { |
| int i; |
| |
| for (i = EXYNOS_MOUT_AUDSS; i < EXYNOS_DOUT_SRP; i++) { |
| if (!IS_ERR(clk_data->hws[i])) |
| clk_hw_unregister_mux(clk_data->hws[i]); |
| } |
| |
| for (; i < EXYNOS_SRP_CLK; i++) { |
| if (!IS_ERR(clk_data->hws[i])) |
| clk_hw_unregister_divider(clk_data->hws[i]); |
| } |
| |
| for (; i < clk_data->num; i++) { |
| if (!IS_ERR(clk_data->hws[i])) |
| clk_hw_unregister_gate(clk_data->hws[i]); |
| } |
| } |
| |
| /* register exynos_audss clocks */ |
| static int exynos_audss_clk_probe(struct platform_device *pdev) |
| { |
| const char *mout_audss_p[] = {"fin_pll", "fout_epll"}; |
| const char *mout_i2s_p[] = {"mout_audss", "cdclk0", "sclk_audio0"}; |
| const char *sclk_pcm_p = "sclk_pcm0"; |
| struct clk *pll_ref, *pll_in, *cdclk, *sclk_audio, *sclk_pcm_in; |
| const struct exynos_audss_clk_drvdata *variant; |
| struct clk_hw **clk_table; |
| struct device *dev = &pdev->dev; |
| int i, ret = 0; |
| |
| variant = of_device_get_match_data(&pdev->dev); |
| if (!variant) |
| return -EINVAL; |
| |
| reg_base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(reg_base)) |
| return PTR_ERR(reg_base); |
| |
| epll = ERR_PTR(-ENODEV); |
| |
| clk_data = devm_kzalloc(dev, |
| struct_size(clk_data, hws, |
| EXYNOS_AUDSS_MAX_CLKS), |
| GFP_KERNEL); |
| if (!clk_data) |
| return -ENOMEM; |
| |
| clk_data->num = variant->num_clks; |
| clk_table = clk_data->hws; |
| |
| pll_ref = devm_clk_get(dev, "pll_ref"); |
| pll_in = devm_clk_get(dev, "pll_in"); |
| if (!IS_ERR(pll_ref)) |
| mout_audss_p[0] = __clk_get_name(pll_ref); |
| if (!IS_ERR(pll_in)) { |
| mout_audss_p[1] = __clk_get_name(pll_in); |
| |
| if (variant->enable_epll) { |
| epll = pll_in; |
| |
| ret = clk_prepare_enable(epll); |
| if (ret) { |
| dev_err(dev, |
| "failed to prepare the epll clock\n"); |
| return ret; |
| } |
| } |
| } |
| |
| /* |
| * Enable runtime PM here to allow the clock core using runtime PM |
| * for the registered clocks. Additionally, we increase the runtime |
| * PM usage count before registering the clocks, to prevent the |
| * clock core from runtime suspending the device. |
| */ |
| pm_runtime_get_noresume(dev); |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| |
| clk_table[EXYNOS_MOUT_AUDSS] = clk_hw_register_mux(dev, "mout_audss", |
| mout_audss_p, ARRAY_SIZE(mout_audss_p), |
| CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT, |
| reg_base + ASS_CLK_SRC, 0, 1, 0, &lock); |
| |
| cdclk = devm_clk_get(dev, "cdclk"); |
| sclk_audio = devm_clk_get(dev, "sclk_audio"); |
| if (!IS_ERR(cdclk)) |
| mout_i2s_p[1] = __clk_get_name(cdclk); |
| if (!IS_ERR(sclk_audio)) |
| mout_i2s_p[2] = __clk_get_name(sclk_audio); |
| clk_table[EXYNOS_MOUT_I2S] = clk_hw_register_mux(dev, "mout_i2s", |
| mout_i2s_p, ARRAY_SIZE(mout_i2s_p), |
| CLK_SET_RATE_NO_REPARENT, |
| reg_base + ASS_CLK_SRC, 2, 2, 0, &lock); |
| |
| clk_table[EXYNOS_DOUT_SRP] = clk_hw_register_divider(dev, "dout_srp", |
| "mout_audss", CLK_SET_RATE_PARENT, |
| reg_base + ASS_CLK_DIV, 0, 4, 0, &lock); |
| |
| clk_table[EXYNOS_DOUT_AUD_BUS] = clk_hw_register_divider(dev, |
| "dout_aud_bus", "dout_srp", CLK_SET_RATE_PARENT, |
| reg_base + ASS_CLK_DIV, 4, 4, 0, &lock); |
| |
| clk_table[EXYNOS_DOUT_I2S] = clk_hw_register_divider(dev, "dout_i2s", |
| "mout_i2s", 0, reg_base + ASS_CLK_DIV, 8, 4, 0, |
| &lock); |
| |
| clk_table[EXYNOS_SRP_CLK] = clk_hw_register_gate(dev, "srp_clk", |
| "dout_srp", CLK_SET_RATE_PARENT, |
| reg_base + ASS_CLK_GATE, 0, 0, &lock); |
| |
| clk_table[EXYNOS_I2S_BUS] = clk_hw_register_gate(dev, "i2s_bus", |
| "dout_aud_bus", CLK_SET_RATE_PARENT, |
| reg_base + ASS_CLK_GATE, 2, 0, &lock); |
| |
| clk_table[EXYNOS_SCLK_I2S] = clk_hw_register_gate(dev, "sclk_i2s", |
| "dout_i2s", CLK_SET_RATE_PARENT, |
| reg_base + ASS_CLK_GATE, 3, 0, &lock); |
| |
| clk_table[EXYNOS_PCM_BUS] = clk_hw_register_gate(dev, "pcm_bus", |
| "sclk_pcm", CLK_SET_RATE_PARENT, |
| reg_base + ASS_CLK_GATE, 4, 0, &lock); |
| |
| sclk_pcm_in = devm_clk_get(dev, "sclk_pcm_in"); |
| if (!IS_ERR(sclk_pcm_in)) |
| sclk_pcm_p = __clk_get_name(sclk_pcm_in); |
| clk_table[EXYNOS_SCLK_PCM] = clk_hw_register_gate(dev, "sclk_pcm", |
| sclk_pcm_p, CLK_SET_RATE_PARENT, |
| reg_base + ASS_CLK_GATE, 5, 0, &lock); |
| |
| if (variant->has_adma_clk) { |
| clk_table[EXYNOS_ADMA] = clk_hw_register_gate(dev, "adma", |
| "dout_srp", CLK_SET_RATE_PARENT, |
| reg_base + ASS_CLK_GATE, 9, 0, &lock); |
| } |
| |
| for (i = 0; i < clk_data->num; i++) { |
| if (IS_ERR(clk_table[i])) { |
| dev_err(dev, "failed to register clock %d\n", i); |
| ret = PTR_ERR(clk_table[i]); |
| goto unregister; |
| } |
| } |
| |
| ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get, |
| clk_data); |
| if (ret) { |
| dev_err(dev, "failed to add clock provider\n"); |
| goto unregister; |
| } |
| |
| pm_runtime_put_sync(dev); |
| |
| return 0; |
| |
| unregister: |
| exynos_audss_clk_teardown(); |
| pm_runtime_put_sync(dev); |
| pm_runtime_disable(dev); |
| |
| if (!IS_ERR(epll)) |
| clk_disable_unprepare(epll); |
| |
| return ret; |
| } |
| |
| static void exynos_audss_clk_remove(struct platform_device *pdev) |
| { |
| of_clk_del_provider(pdev->dev.of_node); |
| |
| exynos_audss_clk_teardown(); |
| pm_runtime_disable(&pdev->dev); |
| |
| if (!IS_ERR(epll)) |
| clk_disable_unprepare(epll); |
| } |
| |
| static const struct dev_pm_ops exynos_audss_clk_pm_ops = { |
| SET_RUNTIME_PM_OPS(exynos_audss_clk_suspend, exynos_audss_clk_resume, |
| NULL) |
| SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, |
| pm_runtime_force_resume) |
| }; |
| |
| static struct platform_driver exynos_audss_clk_driver = { |
| .driver = { |
| .name = "exynos-audss-clk", |
| .of_match_table = exynos_audss_clk_of_match, |
| .pm = &exynos_audss_clk_pm_ops, |
| }, |
| .probe = exynos_audss_clk_probe, |
| .remove = exynos_audss_clk_remove, |
| }; |
| |
| module_platform_driver(exynos_audss_clk_driver); |
| |
| MODULE_AUTHOR("Padmavathi Venna <padma.v@samsung.com>"); |
| MODULE_DESCRIPTION("Exynos Audio Subsystem Clock Controller"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:exynos-audss-clk"); |