| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2015 Linaro Ltd. |
| * Author: Pi-Cheng Chen <pi-cheng.chen@linaro.org> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/cpu.h> |
| #include <linux/cpufreq.h> |
| #include <linux/cpumask.h> |
| #include <linux/minmax.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_opp.h> |
| #include <linux/regulator/consumer.h> |
| |
| struct mtk_cpufreq_platform_data { |
| int min_volt_shift; |
| int max_volt_shift; |
| int proc_max_volt; |
| int sram_min_volt; |
| int sram_max_volt; |
| bool ccifreq_supported; |
| }; |
| |
| /* |
| * The struct mtk_cpu_dvfs_info holds necessary information for doing CPU DVFS |
| * on each CPU power/clock domain of Mediatek SoCs. Each CPU cluster in |
| * Mediatek SoCs has two voltage inputs, Vproc and Vsram. In some cases the two |
| * voltage inputs need to be controlled under a hardware limitation: |
| * 100mV < Vsram - Vproc < 200mV |
| * |
| * When scaling the clock frequency of a CPU clock domain, the clock source |
| * needs to be switched to another stable PLL clock temporarily until |
| * the original PLL becomes stable at target frequency. |
| */ |
| struct mtk_cpu_dvfs_info { |
| struct cpumask cpus; |
| struct device *cpu_dev; |
| struct device *cci_dev; |
| struct regulator *proc_reg; |
| struct regulator *sram_reg; |
| struct clk *cpu_clk; |
| struct clk *inter_clk; |
| struct list_head list_head; |
| int intermediate_voltage; |
| bool need_voltage_tracking; |
| int vproc_on_boot; |
| int pre_vproc; |
| /* Avoid race condition for regulators between notify and policy */ |
| struct mutex reg_lock; |
| struct notifier_block opp_nb; |
| unsigned int opp_cpu; |
| unsigned long current_freq; |
| const struct mtk_cpufreq_platform_data *soc_data; |
| int vtrack_max; |
| bool ccifreq_bound; |
| }; |
| |
| static struct platform_device *cpufreq_pdev; |
| |
| static LIST_HEAD(dvfs_info_list); |
| |
| static struct mtk_cpu_dvfs_info *mtk_cpu_dvfs_info_lookup(int cpu) |
| { |
| struct mtk_cpu_dvfs_info *info; |
| |
| list_for_each_entry(info, &dvfs_info_list, list_head) { |
| if (cpumask_test_cpu(cpu, &info->cpus)) |
| return info; |
| } |
| |
| return NULL; |
| } |
| |
| static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info, |
| int new_vproc) |
| { |
| const struct mtk_cpufreq_platform_data *soc_data = info->soc_data; |
| struct regulator *proc_reg = info->proc_reg; |
| struct regulator *sram_reg = info->sram_reg; |
| int pre_vproc, pre_vsram, new_vsram, vsram, vproc, ret; |
| int retry = info->vtrack_max; |
| |
| pre_vproc = regulator_get_voltage(proc_reg); |
| if (pre_vproc < 0) { |
| dev_err(info->cpu_dev, |
| "invalid Vproc value: %d\n", pre_vproc); |
| return pre_vproc; |
| } |
| |
| pre_vsram = regulator_get_voltage(sram_reg); |
| if (pre_vsram < 0) { |
| dev_err(info->cpu_dev, "invalid Vsram value: %d\n", pre_vsram); |
| return pre_vsram; |
| } |
| |
| new_vsram = clamp(new_vproc + soc_data->min_volt_shift, |
| soc_data->sram_min_volt, soc_data->sram_max_volt); |
| |
| do { |
| if (pre_vproc <= new_vproc) { |
| vsram = clamp(pre_vproc + soc_data->max_volt_shift, |
| soc_data->sram_min_volt, new_vsram); |
| ret = regulator_set_voltage(sram_reg, vsram, |
| soc_data->sram_max_volt); |
| |
| if (ret) |
| return ret; |
| |
| if (vsram == soc_data->sram_max_volt || |
| new_vsram == soc_data->sram_min_volt) |
| vproc = new_vproc; |
| else |
| vproc = vsram - soc_data->min_volt_shift; |
| |
| ret = regulator_set_voltage(proc_reg, vproc, |
| soc_data->proc_max_volt); |
| if (ret) { |
| regulator_set_voltage(sram_reg, pre_vsram, |
| soc_data->sram_max_volt); |
| return ret; |
| } |
| } else if (pre_vproc > new_vproc) { |
| vproc = max(new_vproc, |
| pre_vsram - soc_data->max_volt_shift); |
| ret = regulator_set_voltage(proc_reg, vproc, |
| soc_data->proc_max_volt); |
| if (ret) |
| return ret; |
| |
| if (vproc == new_vproc) |
| vsram = new_vsram; |
| else |
| vsram = max(new_vsram, |
| vproc + soc_data->min_volt_shift); |
| |
| ret = regulator_set_voltage(sram_reg, vsram, |
| soc_data->sram_max_volt); |
| if (ret) { |
| regulator_set_voltage(proc_reg, pre_vproc, |
| soc_data->proc_max_volt); |
| return ret; |
| } |
| } |
| |
| pre_vproc = vproc; |
| pre_vsram = vsram; |
| |
| if (--retry < 0) { |
| dev_err(info->cpu_dev, |
| "over loop count, failed to set voltage\n"); |
| return -EINVAL; |
| } |
| } while (vproc != new_vproc || vsram != new_vsram); |
| |
| return 0; |
| } |
| |
| static int mtk_cpufreq_set_voltage(struct mtk_cpu_dvfs_info *info, int vproc) |
| { |
| const struct mtk_cpufreq_platform_data *soc_data = info->soc_data; |
| int ret; |
| |
| if (info->need_voltage_tracking) |
| ret = mtk_cpufreq_voltage_tracking(info, vproc); |
| else |
| ret = regulator_set_voltage(info->proc_reg, vproc, |
| soc_data->proc_max_volt); |
| if (!ret) |
| info->pre_vproc = vproc; |
| |
| return ret; |
| } |
| |
| static bool is_ccifreq_ready(struct mtk_cpu_dvfs_info *info) |
| { |
| struct device_link *sup_link; |
| |
| if (info->ccifreq_bound) |
| return true; |
| |
| sup_link = device_link_add(info->cpu_dev, info->cci_dev, |
| DL_FLAG_AUTOREMOVE_CONSUMER); |
| if (!sup_link) { |
| dev_err(info->cpu_dev, "cpu%d: sup_link is NULL\n", info->opp_cpu); |
| return false; |
| } |
| |
| if (sup_link->supplier->links.status != DL_DEV_DRIVER_BOUND) |
| return false; |
| |
| info->ccifreq_bound = true; |
| |
| return true; |
| } |
| |
| static int mtk_cpufreq_set_target(struct cpufreq_policy *policy, |
| unsigned int index) |
| { |
| struct cpufreq_frequency_table *freq_table = policy->freq_table; |
| struct clk *cpu_clk = policy->clk; |
| struct clk *armpll = clk_get_parent(cpu_clk); |
| struct mtk_cpu_dvfs_info *info = policy->driver_data; |
| struct device *cpu_dev = info->cpu_dev; |
| struct dev_pm_opp *opp; |
| long freq_hz, pre_freq_hz; |
| int vproc, pre_vproc, inter_vproc, target_vproc, ret; |
| |
| inter_vproc = info->intermediate_voltage; |
| |
| pre_freq_hz = clk_get_rate(cpu_clk); |
| |
| mutex_lock(&info->reg_lock); |
| |
| if (unlikely(info->pre_vproc <= 0)) |
| pre_vproc = regulator_get_voltage(info->proc_reg); |
| else |
| pre_vproc = info->pre_vproc; |
| |
| if (pre_vproc < 0) { |
| dev_err(cpu_dev, "invalid Vproc value: %d\n", pre_vproc); |
| ret = pre_vproc; |
| goto out; |
| } |
| |
| freq_hz = freq_table[index].frequency * 1000; |
| |
| opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz); |
| if (IS_ERR(opp)) { |
| dev_err(cpu_dev, "cpu%d: failed to find OPP for %ld\n", |
| policy->cpu, freq_hz); |
| ret = PTR_ERR(opp); |
| goto out; |
| } |
| vproc = dev_pm_opp_get_voltage(opp); |
| dev_pm_opp_put(opp); |
| |
| /* |
| * If MediaTek cci is supported but is not ready, we will use the value |
| * of max(target cpu voltage, booting voltage) to prevent high freqeuncy |
| * low voltage crash. |
| */ |
| if (info->soc_data->ccifreq_supported && !is_ccifreq_ready(info)) |
| vproc = max(vproc, info->vproc_on_boot); |
| |
| /* |
| * If the new voltage or the intermediate voltage is higher than the |
| * current voltage, scale up voltage first. |
| */ |
| target_vproc = max(inter_vproc, vproc); |
| if (pre_vproc <= target_vproc) { |
| ret = mtk_cpufreq_set_voltage(info, target_vproc); |
| if (ret) { |
| dev_err(cpu_dev, |
| "cpu%d: failed to scale up voltage!\n", policy->cpu); |
| mtk_cpufreq_set_voltage(info, pre_vproc); |
| goto out; |
| } |
| } |
| |
| /* Reparent the CPU clock to intermediate clock. */ |
| ret = clk_set_parent(cpu_clk, info->inter_clk); |
| if (ret) { |
| dev_err(cpu_dev, |
| "cpu%d: failed to re-parent cpu clock!\n", policy->cpu); |
| mtk_cpufreq_set_voltage(info, pre_vproc); |
| goto out; |
| } |
| |
| /* Set the original PLL to target rate. */ |
| ret = clk_set_rate(armpll, freq_hz); |
| if (ret) { |
| dev_err(cpu_dev, |
| "cpu%d: failed to scale cpu clock rate!\n", policy->cpu); |
| clk_set_parent(cpu_clk, armpll); |
| mtk_cpufreq_set_voltage(info, pre_vproc); |
| goto out; |
| } |
| |
| /* Set parent of CPU clock back to the original PLL. */ |
| ret = clk_set_parent(cpu_clk, armpll); |
| if (ret) { |
| dev_err(cpu_dev, |
| "cpu%d: failed to re-parent cpu clock!\n", policy->cpu); |
| mtk_cpufreq_set_voltage(info, inter_vproc); |
| goto out; |
| } |
| |
| /* |
| * If the new voltage is lower than the intermediate voltage or the |
| * original voltage, scale down to the new voltage. |
| */ |
| if (vproc < inter_vproc || vproc < pre_vproc) { |
| ret = mtk_cpufreq_set_voltage(info, vproc); |
| if (ret) { |
| dev_err(cpu_dev, |
| "cpu%d: failed to scale down voltage!\n", policy->cpu); |
| clk_set_parent(cpu_clk, info->inter_clk); |
| clk_set_rate(armpll, pre_freq_hz); |
| clk_set_parent(cpu_clk, armpll); |
| goto out; |
| } |
| } |
| |
| info->current_freq = freq_hz; |
| |
| out: |
| mutex_unlock(&info->reg_lock); |
| |
| return ret; |
| } |
| |
| static int mtk_cpufreq_opp_notifier(struct notifier_block *nb, |
| unsigned long event, void *data) |
| { |
| struct dev_pm_opp *opp = data; |
| struct dev_pm_opp *new_opp; |
| struct mtk_cpu_dvfs_info *info; |
| unsigned long freq, volt; |
| struct cpufreq_policy *policy; |
| int ret = 0; |
| |
| info = container_of(nb, struct mtk_cpu_dvfs_info, opp_nb); |
| |
| if (event == OPP_EVENT_ADJUST_VOLTAGE) { |
| freq = dev_pm_opp_get_freq(opp); |
| |
| mutex_lock(&info->reg_lock); |
| if (info->current_freq == freq) { |
| volt = dev_pm_opp_get_voltage(opp); |
| ret = mtk_cpufreq_set_voltage(info, volt); |
| if (ret) |
| dev_err(info->cpu_dev, |
| "failed to scale voltage: %d\n", ret); |
| } |
| mutex_unlock(&info->reg_lock); |
| } else if (event == OPP_EVENT_DISABLE) { |
| freq = dev_pm_opp_get_freq(opp); |
| |
| /* case of current opp item is disabled */ |
| if (info->current_freq == freq) { |
| freq = 1; |
| new_opp = dev_pm_opp_find_freq_ceil(info->cpu_dev, |
| &freq); |
| if (IS_ERR(new_opp)) { |
| dev_err(info->cpu_dev, |
| "all opp items are disabled\n"); |
| ret = PTR_ERR(new_opp); |
| return notifier_from_errno(ret); |
| } |
| |
| dev_pm_opp_put(new_opp); |
| policy = cpufreq_cpu_get(info->opp_cpu); |
| if (policy) { |
| cpufreq_driver_target(policy, freq / 1000, |
| CPUFREQ_RELATION_L); |
| cpufreq_cpu_put(policy); |
| } |
| } |
| } |
| |
| return notifier_from_errno(ret); |
| } |
| |
| static struct device *of_get_cci(struct device *cpu_dev) |
| { |
| struct device_node *np; |
| struct platform_device *pdev; |
| |
| np = of_parse_phandle(cpu_dev->of_node, "mediatek,cci", 0); |
| if (!np) |
| return ERR_PTR(-ENODEV); |
| |
| pdev = of_find_device_by_node(np); |
| of_node_put(np); |
| if (!pdev) |
| return ERR_PTR(-ENODEV); |
| |
| return &pdev->dev; |
| } |
| |
| static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu) |
| { |
| struct device *cpu_dev; |
| struct dev_pm_opp *opp; |
| unsigned long rate; |
| int ret; |
| |
| cpu_dev = get_cpu_device(cpu); |
| if (!cpu_dev) |
| return dev_err_probe(cpu_dev, -ENODEV, "failed to get cpu%d device\n", cpu); |
| info->cpu_dev = cpu_dev; |
| |
| info->ccifreq_bound = false; |
| if (info->soc_data->ccifreq_supported) { |
| info->cci_dev = of_get_cci(info->cpu_dev); |
| if (IS_ERR(info->cci_dev)) |
| return dev_err_probe(cpu_dev, PTR_ERR(info->cci_dev), |
| "cpu%d: failed to get cci device\n", |
| cpu); |
| } |
| |
| info->cpu_clk = clk_get(cpu_dev, "cpu"); |
| if (IS_ERR(info->cpu_clk)) |
| return dev_err_probe(cpu_dev, PTR_ERR(info->cpu_clk), |
| "cpu%d: failed to get cpu clk\n", cpu); |
| |
| info->inter_clk = clk_get(cpu_dev, "intermediate"); |
| if (IS_ERR(info->inter_clk)) { |
| ret = PTR_ERR(info->inter_clk); |
| dev_err_probe(cpu_dev, ret, |
| "cpu%d: failed to get intermediate clk\n", cpu); |
| goto out_free_mux_clock; |
| } |
| |
| info->proc_reg = regulator_get_optional(cpu_dev, "proc"); |
| if (IS_ERR(info->proc_reg)) { |
| ret = PTR_ERR(info->proc_reg); |
| dev_err_probe(cpu_dev, ret, |
| "cpu%d: failed to get proc regulator\n", cpu); |
| goto out_free_inter_clock; |
| } |
| |
| ret = regulator_enable(info->proc_reg); |
| if (ret) { |
| dev_err_probe(cpu_dev, ret, "cpu%d: failed to enable vproc\n", cpu); |
| goto out_free_proc_reg; |
| } |
| |
| /* Both presence and absence of sram regulator are valid cases. */ |
| info->sram_reg = regulator_get_optional(cpu_dev, "sram"); |
| if (IS_ERR(info->sram_reg)) { |
| ret = PTR_ERR(info->sram_reg); |
| if (ret == -EPROBE_DEFER) { |
| dev_err_probe(cpu_dev, ret, |
| "cpu%d: Failed to get sram regulator\n", cpu); |
| goto out_disable_proc_reg; |
| } |
| |
| info->sram_reg = NULL; |
| } else { |
| ret = regulator_enable(info->sram_reg); |
| if (ret) { |
| dev_err_probe(cpu_dev, ret, "cpu%d: failed to enable vsram\n", cpu); |
| goto out_free_sram_reg; |
| } |
| } |
| |
| /* Get OPP-sharing information from "operating-points-v2" bindings */ |
| ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, &info->cpus); |
| if (ret) { |
| dev_err_probe(cpu_dev, ret, |
| "cpu%d: failed to get OPP-sharing information\n", cpu); |
| goto out_disable_sram_reg; |
| } |
| |
| ret = dev_pm_opp_of_cpumask_add_table(&info->cpus); |
| if (ret) { |
| dev_err_probe(cpu_dev, ret, "cpu%d: no OPP table\n", cpu); |
| goto out_disable_sram_reg; |
| } |
| |
| ret = clk_prepare_enable(info->cpu_clk); |
| if (ret) { |
| dev_err_probe(cpu_dev, ret, "cpu%d: failed to enable cpu clk\n", cpu); |
| goto out_free_opp_table; |
| } |
| |
| ret = clk_prepare_enable(info->inter_clk); |
| if (ret) { |
| dev_err_probe(cpu_dev, ret, "cpu%d: failed to enable inter clk\n", cpu); |
| goto out_disable_mux_clock; |
| } |
| |
| if (info->soc_data->ccifreq_supported) { |
| info->vproc_on_boot = regulator_get_voltage(info->proc_reg); |
| if (info->vproc_on_boot < 0) { |
| ret = dev_err_probe(info->cpu_dev, info->vproc_on_boot, |
| "invalid Vproc value\n"); |
| goto out_disable_inter_clock; |
| } |
| } |
| |
| /* Search a safe voltage for intermediate frequency. */ |
| rate = clk_get_rate(info->inter_clk); |
| opp = dev_pm_opp_find_freq_ceil(cpu_dev, &rate); |
| if (IS_ERR(opp)) { |
| ret = dev_err_probe(cpu_dev, PTR_ERR(opp), |
| "cpu%d: failed to get intermediate opp\n", cpu); |
| goto out_disable_inter_clock; |
| } |
| info->intermediate_voltage = dev_pm_opp_get_voltage(opp); |
| dev_pm_opp_put(opp); |
| |
| mutex_init(&info->reg_lock); |
| info->current_freq = clk_get_rate(info->cpu_clk); |
| |
| info->opp_cpu = cpu; |
| info->opp_nb.notifier_call = mtk_cpufreq_opp_notifier; |
| ret = dev_pm_opp_register_notifier(cpu_dev, &info->opp_nb); |
| if (ret) { |
| dev_err_probe(cpu_dev, ret, "cpu%d: failed to register opp notifier\n", cpu); |
| goto out_disable_inter_clock; |
| } |
| |
| /* |
| * If SRAM regulator is present, software "voltage tracking" is needed |
| * for this CPU power domain. |
| */ |
| info->need_voltage_tracking = (info->sram_reg != NULL); |
| |
| /* |
| * We assume min voltage is 0 and tracking target voltage using |
| * min_volt_shift for each iteration. |
| * The vtrack_max is 3 times of expeted iteration count. |
| */ |
| info->vtrack_max = 3 * DIV_ROUND_UP(max(info->soc_data->sram_max_volt, |
| info->soc_data->proc_max_volt), |
| info->soc_data->min_volt_shift); |
| |
| return 0; |
| |
| out_disable_inter_clock: |
| clk_disable_unprepare(info->inter_clk); |
| |
| out_disable_mux_clock: |
| clk_disable_unprepare(info->cpu_clk); |
| |
| out_free_opp_table: |
| dev_pm_opp_of_cpumask_remove_table(&info->cpus); |
| |
| out_disable_sram_reg: |
| if (info->sram_reg) |
| regulator_disable(info->sram_reg); |
| |
| out_free_sram_reg: |
| if (info->sram_reg) |
| regulator_put(info->sram_reg); |
| |
| out_disable_proc_reg: |
| regulator_disable(info->proc_reg); |
| |
| out_free_proc_reg: |
| regulator_put(info->proc_reg); |
| |
| out_free_inter_clock: |
| clk_put(info->inter_clk); |
| |
| out_free_mux_clock: |
| clk_put(info->cpu_clk); |
| |
| return ret; |
| } |
| |
| static void mtk_cpu_dvfs_info_release(struct mtk_cpu_dvfs_info *info) |
| { |
| regulator_disable(info->proc_reg); |
| regulator_put(info->proc_reg); |
| if (info->sram_reg) { |
| regulator_disable(info->sram_reg); |
| regulator_put(info->sram_reg); |
| } |
| clk_disable_unprepare(info->cpu_clk); |
| clk_put(info->cpu_clk); |
| clk_disable_unprepare(info->inter_clk); |
| clk_put(info->inter_clk); |
| dev_pm_opp_of_cpumask_remove_table(&info->cpus); |
| dev_pm_opp_unregister_notifier(info->cpu_dev, &info->opp_nb); |
| } |
| |
| static int mtk_cpufreq_init(struct cpufreq_policy *policy) |
| { |
| struct mtk_cpu_dvfs_info *info; |
| struct cpufreq_frequency_table *freq_table; |
| int ret; |
| |
| info = mtk_cpu_dvfs_info_lookup(policy->cpu); |
| if (!info) { |
| pr_err("dvfs info for cpu%d is not initialized.\n", |
| policy->cpu); |
| return -EINVAL; |
| } |
| |
| ret = dev_pm_opp_init_cpufreq_table(info->cpu_dev, &freq_table); |
| if (ret) { |
| dev_err(info->cpu_dev, |
| "failed to init cpufreq table for cpu%d: %d\n", |
| policy->cpu, ret); |
| return ret; |
| } |
| |
| cpumask_copy(policy->cpus, &info->cpus); |
| policy->freq_table = freq_table; |
| policy->driver_data = info; |
| policy->clk = info->cpu_clk; |
| |
| return 0; |
| } |
| |
| static void mtk_cpufreq_exit(struct cpufreq_policy *policy) |
| { |
| struct mtk_cpu_dvfs_info *info = policy->driver_data; |
| |
| dev_pm_opp_free_cpufreq_table(info->cpu_dev, &policy->freq_table); |
| } |
| |
| static struct cpufreq_driver mtk_cpufreq_driver = { |
| .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | |
| CPUFREQ_HAVE_GOVERNOR_PER_POLICY | |
| CPUFREQ_IS_COOLING_DEV, |
| .verify = cpufreq_generic_frequency_table_verify, |
| .target_index = mtk_cpufreq_set_target, |
| .get = cpufreq_generic_get, |
| .init = mtk_cpufreq_init, |
| .exit = mtk_cpufreq_exit, |
| .register_em = cpufreq_register_em_with_opp, |
| .name = "mtk-cpufreq", |
| .attr = cpufreq_generic_attr, |
| }; |
| |
| static int mtk_cpufreq_probe(struct platform_device *pdev) |
| { |
| const struct mtk_cpufreq_platform_data *data; |
| struct mtk_cpu_dvfs_info *info, *tmp; |
| int cpu, ret; |
| |
| data = dev_get_platdata(&pdev->dev); |
| if (!data) |
| return dev_err_probe(&pdev->dev, -ENODEV, |
| "failed to get mtk cpufreq platform data\n"); |
| |
| for_each_possible_cpu(cpu) { |
| info = mtk_cpu_dvfs_info_lookup(cpu); |
| if (info) |
| continue; |
| |
| info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); |
| if (!info) { |
| ret = dev_err_probe(&pdev->dev, -ENOMEM, |
| "Failed to allocate dvfs_info\n"); |
| goto release_dvfs_info_list; |
| } |
| |
| info->soc_data = data; |
| ret = mtk_cpu_dvfs_info_init(info, cpu); |
| if (ret) |
| goto release_dvfs_info_list; |
| |
| list_add(&info->list_head, &dvfs_info_list); |
| } |
| |
| ret = cpufreq_register_driver(&mtk_cpufreq_driver); |
| if (ret) { |
| dev_err_probe(&pdev->dev, ret, "failed to register mtk cpufreq driver\n"); |
| goto release_dvfs_info_list; |
| } |
| |
| return 0; |
| |
| release_dvfs_info_list: |
| list_for_each_entry_safe(info, tmp, &dvfs_info_list, list_head) { |
| mtk_cpu_dvfs_info_release(info); |
| list_del(&info->list_head); |
| } |
| |
| return ret; |
| } |
| |
| static struct platform_driver mtk_cpufreq_platdrv = { |
| .driver = { |
| .name = "mtk-cpufreq", |
| }, |
| .probe = mtk_cpufreq_probe, |
| }; |
| |
| static const struct mtk_cpufreq_platform_data mt2701_platform_data = { |
| .min_volt_shift = 100000, |
| .max_volt_shift = 200000, |
| .proc_max_volt = 1150000, |
| .sram_min_volt = 0, |
| .sram_max_volt = 1150000, |
| .ccifreq_supported = false, |
| }; |
| |
| static const struct mtk_cpufreq_platform_data mt7622_platform_data = { |
| .min_volt_shift = 100000, |
| .max_volt_shift = 200000, |
| .proc_max_volt = 1350000, |
| .sram_min_volt = 0, |
| .sram_max_volt = 1350000, |
| .ccifreq_supported = false, |
| }; |
| |
| static const struct mtk_cpufreq_platform_data mt7623_platform_data = { |
| .min_volt_shift = 100000, |
| .max_volt_shift = 200000, |
| .proc_max_volt = 1300000, |
| .ccifreq_supported = false, |
| }; |
| |
| static const struct mtk_cpufreq_platform_data mt7988_platform_data = { |
| .min_volt_shift = 100000, |
| .max_volt_shift = 200000, |
| .proc_max_volt = 900000, |
| .sram_min_volt = 0, |
| .sram_max_volt = 1150000, |
| .ccifreq_supported = true, |
| }; |
| |
| static const struct mtk_cpufreq_platform_data mt8183_platform_data = { |
| .min_volt_shift = 100000, |
| .max_volt_shift = 200000, |
| .proc_max_volt = 1150000, |
| .sram_min_volt = 0, |
| .sram_max_volt = 1150000, |
| .ccifreq_supported = true, |
| }; |
| |
| static const struct mtk_cpufreq_platform_data mt8186_platform_data = { |
| .min_volt_shift = 100000, |
| .max_volt_shift = 250000, |
| .proc_max_volt = 1118750, |
| .sram_min_volt = 850000, |
| .sram_max_volt = 1118750, |
| .ccifreq_supported = true, |
| }; |
| |
| static const struct mtk_cpufreq_platform_data mt8516_platform_data = { |
| .min_volt_shift = 100000, |
| .max_volt_shift = 200000, |
| .proc_max_volt = 1310000, |
| .sram_min_volt = 0, |
| .sram_max_volt = 1310000, |
| .ccifreq_supported = false, |
| }; |
| |
| /* List of machines supported by this driver */ |
| static const struct of_device_id mtk_cpufreq_machines[] __initconst __maybe_unused = { |
| { .compatible = "mediatek,mt2701", .data = &mt2701_platform_data }, |
| { .compatible = "mediatek,mt2712", .data = &mt2701_platform_data }, |
| { .compatible = "mediatek,mt7622", .data = &mt7622_platform_data }, |
| { .compatible = "mediatek,mt7623", .data = &mt7623_platform_data }, |
| { .compatible = "mediatek,mt7988a", .data = &mt7988_platform_data }, |
| { .compatible = "mediatek,mt8167", .data = &mt8516_platform_data }, |
| { .compatible = "mediatek,mt817x", .data = &mt2701_platform_data }, |
| { .compatible = "mediatek,mt8173", .data = &mt2701_platform_data }, |
| { .compatible = "mediatek,mt8176", .data = &mt2701_platform_data }, |
| { .compatible = "mediatek,mt8183", .data = &mt8183_platform_data }, |
| { .compatible = "mediatek,mt8186", .data = &mt8186_platform_data }, |
| { .compatible = "mediatek,mt8365", .data = &mt2701_platform_data }, |
| { .compatible = "mediatek,mt8516", .data = &mt8516_platform_data }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, mtk_cpufreq_machines); |
| |
| static int __init mtk_cpufreq_driver_init(void) |
| { |
| struct device_node *np; |
| const struct of_device_id *match; |
| const struct mtk_cpufreq_platform_data *data; |
| int err; |
| |
| np = of_find_node_by_path("/"); |
| if (!np) |
| return -ENODEV; |
| |
| match = of_match_node(mtk_cpufreq_machines, np); |
| of_node_put(np); |
| if (!match) { |
| pr_debug("Machine is not compatible with mtk-cpufreq\n"); |
| return -ENODEV; |
| } |
| data = match->data; |
| |
| err = platform_driver_register(&mtk_cpufreq_platdrv); |
| if (err) |
| return err; |
| |
| /* |
| * Since there's no place to hold device registration code and no |
| * device tree based way to match cpufreq driver yet, both the driver |
| * and the device registration codes are put here to handle defer |
| * probing. |
| */ |
| cpufreq_pdev = platform_device_register_data(NULL, "mtk-cpufreq", -1, |
| data, sizeof(*data)); |
| if (IS_ERR(cpufreq_pdev)) { |
| pr_err("failed to register mtk-cpufreq platform device\n"); |
| platform_driver_unregister(&mtk_cpufreq_platdrv); |
| return PTR_ERR(cpufreq_pdev); |
| } |
| |
| return 0; |
| } |
| module_init(mtk_cpufreq_driver_init) |
| |
| static void __exit mtk_cpufreq_driver_exit(void) |
| { |
| platform_device_unregister(cpufreq_pdev); |
| platform_driver_unregister(&mtk_cpufreq_platdrv); |
| } |
| module_exit(mtk_cpufreq_driver_exit) |
| |
| MODULE_DESCRIPTION("MediaTek CPUFreq driver"); |
| MODULE_AUTHOR("Pi-Cheng Chen <pi-cheng.chen@linaro.org>"); |
| MODULE_LICENSE("GPL v2"); |