| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ |
| * Author: Rob Clark <rob@ti.com> |
| */ |
| |
| #include <linux/dma-mapping.h> |
| #include <linux/platform_device.h> |
| #include <linux/of.h> |
| #include <linux/sort.h> |
| #include <linux/sys_soc.h> |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_bridge.h> |
| #include <drm/drm_bridge_connector.h> |
| #include <drm/drm_drv.h> |
| #include <drm/drm_file.h> |
| #include <drm/drm_ioctl.h> |
| #include <drm/drm_panel.h> |
| #include <drm/drm_prime.h> |
| #include <drm/drm_probe_helper.h> |
| #include <drm/drm_vblank.h> |
| |
| #include "omap_dmm_tiler.h" |
| #include "omap_drv.h" |
| #include "omap_fbdev.h" |
| |
| #define DRIVER_NAME MODULE_NAME |
| #define DRIVER_DESC "OMAP DRM" |
| #define DRIVER_DATE "20110917" |
| #define DRIVER_MAJOR 1 |
| #define DRIVER_MINOR 0 |
| #define DRIVER_PATCHLEVEL 0 |
| |
| /* |
| * mode config funcs |
| */ |
| |
| /* Notes about mapping DSS and DRM entities: |
| * CRTC: overlay |
| * encoder: manager.. with some extension to allow one primary CRTC |
| * and zero or more video CRTC's to be mapped to one encoder? |
| * connector: dssdev.. manager can be attached/detached from different |
| * devices |
| */ |
| |
| static void omap_atomic_wait_for_completion(struct drm_device *dev, |
| struct drm_atomic_state *old_state) |
| { |
| struct drm_crtc_state *new_crtc_state; |
| struct drm_crtc *crtc; |
| unsigned int i; |
| int ret; |
| |
| for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i) { |
| if (!new_crtc_state->active) |
| continue; |
| |
| ret = omap_crtc_wait_pending(crtc); |
| |
| if (!ret) |
| dev_warn(dev->dev, |
| "atomic complete timeout (pipe %u)!\n", i); |
| } |
| } |
| |
| static void omap_atomic_commit_tail(struct drm_atomic_state *old_state) |
| { |
| struct drm_device *dev = old_state->dev; |
| struct omap_drm_private *priv = dev->dev_private; |
| |
| dispc_runtime_get(priv->dispc); |
| |
| /* Apply the atomic update. */ |
| drm_atomic_helper_commit_modeset_disables(dev, old_state); |
| |
| if (priv->omaprev != 0x3430) { |
| /* With the current dss dispc implementation we have to enable |
| * the new modeset before we can commit planes. The dispc ovl |
| * configuration relies on the video mode configuration been |
| * written into the HW when the ovl configuration is |
| * calculated. |
| * |
| * This approach is not ideal because after a mode change the |
| * plane update is executed only after the first vblank |
| * interrupt. The dispc implementation should be fixed so that |
| * it is able use uncommitted drm state information. |
| */ |
| drm_atomic_helper_commit_modeset_enables(dev, old_state); |
| omap_atomic_wait_for_completion(dev, old_state); |
| |
| drm_atomic_helper_commit_planes(dev, old_state, 0); |
| |
| drm_atomic_helper_commit_hw_done(old_state); |
| } else { |
| /* |
| * OMAP3 DSS seems to have issues with the work-around above, |
| * resulting in endless sync losts if a crtc is enabled without |
| * a plane. For now, skip the WA for OMAP3. |
| */ |
| drm_atomic_helper_commit_planes(dev, old_state, 0); |
| |
| drm_atomic_helper_commit_modeset_enables(dev, old_state); |
| |
| drm_atomic_helper_commit_hw_done(old_state); |
| } |
| |
| /* |
| * Wait for completion of the page flips to ensure that old buffers |
| * can't be touched by the hardware anymore before cleaning up planes. |
| */ |
| omap_atomic_wait_for_completion(dev, old_state); |
| |
| drm_atomic_helper_cleanup_planes(dev, old_state); |
| |
| dispc_runtime_put(priv->dispc); |
| } |
| |
| static int drm_atomic_state_normalized_zpos_cmp(const void *a, const void *b) |
| { |
| const struct drm_plane_state *sa = *(struct drm_plane_state **)a; |
| const struct drm_plane_state *sb = *(struct drm_plane_state **)b; |
| |
| if (sa->normalized_zpos != sb->normalized_zpos) |
| return sa->normalized_zpos - sb->normalized_zpos; |
| else |
| return sa->plane->base.id - sb->plane->base.id; |
| } |
| |
| /* |
| * This replaces the drm_atomic_normalize_zpos to handle the dual overlay case. |
| * |
| * Since both halves need to be 'appear' side by side the zpos is |
| * recalculated when dealing with dual overlay cases so that the other |
| * planes zpos is consistent. |
| */ |
| static int omap_atomic_update_normalize_zpos(struct drm_device *dev, |
| struct drm_atomic_state *state) |
| { |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *old_state, *new_state; |
| struct drm_plane *plane; |
| int c, i, n, inc; |
| int total_planes = dev->mode_config.num_total_plane; |
| struct drm_plane_state **states; |
| int ret = 0; |
| |
| states = kmalloc_array(total_planes, sizeof(*states), GFP_KERNEL); |
| if (!states) |
| return -ENOMEM; |
| |
| for_each_oldnew_crtc_in_state(state, crtc, old_state, new_state, c) { |
| if (old_state->plane_mask == new_state->plane_mask && |
| !new_state->zpos_changed) |
| continue; |
| |
| /* Reset plane increment and index value for every crtc */ |
| n = 0; |
| |
| /* |
| * Normalization process might create new states for planes |
| * which normalized_zpos has to be recalculated. |
| */ |
| drm_for_each_plane_mask(plane, dev, new_state->plane_mask) { |
| struct drm_plane_state *plane_state = |
| drm_atomic_get_plane_state(new_state->state, |
| plane); |
| if (IS_ERR(plane_state)) { |
| ret = PTR_ERR(plane_state); |
| goto done; |
| } |
| states[n++] = plane_state; |
| } |
| |
| sort(states, n, sizeof(*states), |
| drm_atomic_state_normalized_zpos_cmp, NULL); |
| |
| for (i = 0, inc = 0; i < n; i++) { |
| plane = states[i]->plane; |
| |
| states[i]->normalized_zpos = i + inc; |
| DRM_DEBUG_ATOMIC("[PLANE:%d:%s] updated normalized zpos value %d\n", |
| plane->base.id, plane->name, |
| states[i]->normalized_zpos); |
| |
| if (is_omap_plane_dual_overlay(states[i])) |
| inc++; |
| } |
| new_state->zpos_changed = true; |
| } |
| |
| done: |
| kfree(states); |
| return ret; |
| } |
| |
| static int omap_atomic_check(struct drm_device *dev, |
| struct drm_atomic_state *state) |
| { |
| int ret; |
| |
| ret = drm_atomic_helper_check(dev, state); |
| if (ret) |
| return ret; |
| |
| if (dev->mode_config.normalize_zpos) { |
| ret = omap_atomic_update_normalize_zpos(dev, state); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct drm_mode_config_helper_funcs omap_mode_config_helper_funcs = { |
| .atomic_commit_tail = omap_atomic_commit_tail, |
| }; |
| |
| static const struct drm_mode_config_funcs omap_mode_config_funcs = { |
| .fb_create = omap_framebuffer_create, |
| .atomic_check = omap_atomic_check, |
| .atomic_commit = drm_atomic_helper_commit, |
| }; |
| |
| /* Global/shared object state funcs */ |
| |
| /* |
| * This is a helper that returns the private state currently in operation. |
| * Note that this would return the "old_state" if called in the atomic check |
| * path, and the "new_state" after the atomic swap has been done. |
| */ |
| struct omap_global_state * |
| omap_get_existing_global_state(struct omap_drm_private *priv) |
| { |
| return to_omap_global_state(priv->glob_obj.state); |
| } |
| |
| /* |
| * This acquires the modeset lock set aside for global state, creates |
| * a new duplicated private object state. |
| */ |
| struct omap_global_state *__must_check |
| omap_get_global_state(struct drm_atomic_state *s) |
| { |
| struct omap_drm_private *priv = s->dev->dev_private; |
| struct drm_private_state *priv_state; |
| |
| priv_state = drm_atomic_get_private_obj_state(s, &priv->glob_obj); |
| if (IS_ERR(priv_state)) |
| return ERR_CAST(priv_state); |
| |
| return to_omap_global_state(priv_state); |
| } |
| |
| static struct drm_private_state * |
| omap_global_duplicate_state(struct drm_private_obj *obj) |
| { |
| struct omap_global_state *state; |
| |
| state = kmemdup(obj->state, sizeof(*state), GFP_KERNEL); |
| if (!state) |
| return NULL; |
| |
| __drm_atomic_helper_private_obj_duplicate_state(obj, &state->base); |
| |
| return &state->base; |
| } |
| |
| static void omap_global_destroy_state(struct drm_private_obj *obj, |
| struct drm_private_state *state) |
| { |
| struct omap_global_state *omap_state = to_omap_global_state(state); |
| |
| kfree(omap_state); |
| } |
| |
| static const struct drm_private_state_funcs omap_global_state_funcs = { |
| .atomic_duplicate_state = omap_global_duplicate_state, |
| .atomic_destroy_state = omap_global_destroy_state, |
| }; |
| |
| static int omap_global_obj_init(struct drm_device *dev) |
| { |
| struct omap_drm_private *priv = dev->dev_private; |
| struct omap_global_state *state; |
| |
| state = kzalloc(sizeof(*state), GFP_KERNEL); |
| if (!state) |
| return -ENOMEM; |
| |
| drm_atomic_private_obj_init(dev, &priv->glob_obj, &state->base, |
| &omap_global_state_funcs); |
| return 0; |
| } |
| |
| static void omap_global_obj_fini(struct omap_drm_private *priv) |
| { |
| drm_atomic_private_obj_fini(&priv->glob_obj); |
| } |
| |
| static void omap_disconnect_pipelines(struct drm_device *ddev) |
| { |
| struct omap_drm_private *priv = ddev->dev_private; |
| unsigned int i; |
| |
| for (i = 0; i < priv->num_pipes; i++) { |
| struct omap_drm_pipeline *pipe = &priv->pipes[i]; |
| |
| omapdss_device_disconnect(NULL, pipe->output); |
| |
| omapdss_device_put(pipe->output); |
| pipe->output = NULL; |
| } |
| |
| memset(&priv->channels, 0, sizeof(priv->channels)); |
| |
| priv->num_pipes = 0; |
| } |
| |
| static int omap_connect_pipelines(struct drm_device *ddev) |
| { |
| struct omap_drm_private *priv = ddev->dev_private; |
| struct omap_dss_device *output = NULL; |
| int r; |
| |
| for_each_dss_output(output) { |
| r = omapdss_device_connect(priv->dss, NULL, output); |
| if (r == -EPROBE_DEFER) { |
| omapdss_device_put(output); |
| return r; |
| } else if (r) { |
| dev_warn(output->dev, "could not connect output %s\n", |
| output->name); |
| } else { |
| struct omap_drm_pipeline *pipe; |
| |
| pipe = &priv->pipes[priv->num_pipes++]; |
| pipe->output = omapdss_device_get(output); |
| |
| if (priv->num_pipes == ARRAY_SIZE(priv->pipes)) { |
| /* To balance the 'for_each_dss_output' loop */ |
| omapdss_device_put(output); |
| break; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int omap_compare_pipelines(const void *a, const void *b) |
| { |
| const struct omap_drm_pipeline *pipe1 = a; |
| const struct omap_drm_pipeline *pipe2 = b; |
| |
| if (pipe1->alias_id > pipe2->alias_id) |
| return 1; |
| else if (pipe1->alias_id < pipe2->alias_id) |
| return -1; |
| return 0; |
| } |
| |
| static int omap_modeset_init_properties(struct drm_device *dev) |
| { |
| struct omap_drm_private *priv = dev->dev_private; |
| unsigned int num_planes = dispc_get_num_ovls(priv->dispc); |
| |
| priv->zorder_prop = drm_property_create_range(dev, 0, "zorder", 0, |
| num_planes - 1); |
| if (!priv->zorder_prop) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| static int omap_display_id(struct omap_dss_device *output) |
| { |
| struct device_node *node = NULL; |
| |
| if (output->bridge) { |
| struct drm_bridge *bridge = output->bridge; |
| |
| while (drm_bridge_get_next_bridge(bridge)) |
| bridge = drm_bridge_get_next_bridge(bridge); |
| |
| node = bridge->of_node; |
| } |
| |
| return node ? of_alias_get_id(node, "display") : -ENODEV; |
| } |
| |
| static int omap_modeset_init(struct drm_device *dev) |
| { |
| struct omap_drm_private *priv = dev->dev_private; |
| int num_ovls = dispc_get_num_ovls(priv->dispc); |
| int num_mgrs = dispc_get_num_mgrs(priv->dispc); |
| unsigned int i; |
| int ret; |
| u32 plane_crtc_mask; |
| |
| if (!omapdss_stack_is_ready()) |
| return -EPROBE_DEFER; |
| |
| ret = omap_modeset_init_properties(dev); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * This function creates exactly one connector, encoder, crtc, |
| * and primary plane per each connected dss-device. Each |
| * connector->encoder->crtc chain is expected to be separate |
| * and each crtc is connect to a single dss-channel. If the |
| * configuration does not match the expectations or exceeds |
| * the available resources, the configuration is rejected. |
| */ |
| ret = omap_connect_pipelines(dev); |
| if (ret < 0) |
| return ret; |
| |
| if (priv->num_pipes > num_mgrs || priv->num_pipes > num_ovls) { |
| dev_err(dev->dev, "%s(): Too many connected displays\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| /* Create all planes first. They can all be put to any CRTC. */ |
| plane_crtc_mask = (1 << priv->num_pipes) - 1; |
| |
| for (i = 0; i < num_ovls; i++) { |
| enum drm_plane_type type = i < priv->num_pipes |
| ? DRM_PLANE_TYPE_PRIMARY |
| : DRM_PLANE_TYPE_OVERLAY; |
| struct drm_plane *plane; |
| |
| if (WARN_ON(priv->num_planes >= ARRAY_SIZE(priv->planes))) |
| return -EINVAL; |
| |
| plane = omap_plane_init(dev, i, type, plane_crtc_mask); |
| if (IS_ERR(plane)) |
| return PTR_ERR(plane); |
| |
| priv->planes[priv->num_planes++] = plane; |
| } |
| |
| /* |
| * Create the encoders, attach the bridges and get the pipeline alias |
| * IDs. |
| */ |
| for (i = 0; i < priv->num_pipes; i++) { |
| struct omap_drm_pipeline *pipe = &priv->pipes[i]; |
| int id; |
| |
| pipe->encoder = omap_encoder_init(dev, pipe->output); |
| if (!pipe->encoder) |
| return -ENOMEM; |
| |
| if (pipe->output->bridge) { |
| ret = drm_bridge_attach(pipe->encoder, |
| pipe->output->bridge, NULL, |
| DRM_BRIDGE_ATTACH_NO_CONNECTOR); |
| if (ret < 0) |
| return ret; |
| } |
| |
| id = omap_display_id(pipe->output); |
| pipe->alias_id = id >= 0 ? id : i; |
| } |
| |
| /* Sort the pipelines by DT aliases. */ |
| sort(priv->pipes, priv->num_pipes, sizeof(priv->pipes[0]), |
| omap_compare_pipelines, NULL); |
| |
| /* |
| * Populate the pipeline lookup table by DISPC channel. Only one display |
| * is allowed per channel. |
| */ |
| for (i = 0; i < priv->num_pipes; ++i) { |
| struct omap_drm_pipeline *pipe = &priv->pipes[i]; |
| enum omap_channel channel = pipe->output->dispc_channel; |
| |
| if (WARN_ON(priv->channels[channel] != NULL)) |
| return -EINVAL; |
| |
| priv->channels[channel] = pipe; |
| } |
| |
| /* Create the connectors and CRTCs. */ |
| for (i = 0; i < priv->num_pipes; i++) { |
| struct omap_drm_pipeline *pipe = &priv->pipes[i]; |
| struct drm_encoder *encoder = pipe->encoder; |
| struct drm_crtc *crtc; |
| |
| pipe->connector = drm_bridge_connector_init(dev, encoder); |
| if (IS_ERR(pipe->connector)) { |
| dev_err(priv->dev, |
| "unable to create bridge connector for %s\n", |
| pipe->output->name); |
| return PTR_ERR(pipe->connector); |
| } |
| |
| drm_connector_attach_encoder(pipe->connector, encoder); |
| |
| crtc = omap_crtc_init(dev, pipe, priv->planes[i]); |
| if (IS_ERR(crtc)) |
| return PTR_ERR(crtc); |
| |
| encoder->possible_crtcs = 1 << i; |
| pipe->crtc = crtc; |
| } |
| |
| DBG("registered %u planes, %u crtcs/encoders/connectors\n", |
| priv->num_planes, priv->num_pipes); |
| |
| dev->mode_config.min_width = 8; |
| dev->mode_config.min_height = 2; |
| |
| /* |
| * Note: these values are used for multiple independent things: |
| * connector mode filtering, buffer sizes, crtc sizes... |
| * Use big enough values here to cover all use cases, and do more |
| * specific checking in the respective code paths. |
| */ |
| dev->mode_config.max_width = 8192; |
| dev->mode_config.max_height = 8192; |
| |
| /* We want the zpos to be normalized */ |
| dev->mode_config.normalize_zpos = true; |
| |
| dev->mode_config.funcs = &omap_mode_config_funcs; |
| dev->mode_config.helper_private = &omap_mode_config_helper_funcs; |
| |
| drm_mode_config_reset(dev); |
| |
| omap_drm_irq_install(dev); |
| |
| return 0; |
| } |
| |
| static void omap_modeset_fini(struct drm_device *ddev) |
| { |
| omap_drm_irq_uninstall(ddev); |
| |
| drm_mode_config_cleanup(ddev); |
| } |
| |
| /* |
| * drm ioctl funcs |
| */ |
| |
| |
| static int ioctl_get_param(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct omap_drm_private *priv = dev->dev_private; |
| struct drm_omap_param *args = data; |
| |
| DBG("%p: param=%llu", dev, args->param); |
| |
| switch (args->param) { |
| case OMAP_PARAM_CHIPSET_ID: |
| args->value = priv->omaprev; |
| break; |
| default: |
| DBG("unknown parameter %lld", args->param); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| #define OMAP_BO_USER_MASK 0x00ffffff /* flags settable by userspace */ |
| |
| static int ioctl_gem_new(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_omap_gem_new *args = data; |
| u32 flags = args->flags & OMAP_BO_USER_MASK; |
| |
| VERB("%p:%p: size=0x%08x, flags=%08x", dev, file_priv, |
| args->size.bytes, flags); |
| |
| return omap_gem_new_handle(dev, file_priv, args->size, flags, |
| &args->handle); |
| } |
| |
| static int ioctl_gem_info(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_omap_gem_info *args = data; |
| struct drm_gem_object *obj; |
| int ret = 0; |
| |
| VERB("%p:%p: handle=%d", dev, file_priv, args->handle); |
| |
| obj = drm_gem_object_lookup(file_priv, args->handle); |
| if (!obj) |
| return -ENOENT; |
| |
| args->size = omap_gem_mmap_size(obj); |
| args->offset = omap_gem_mmap_offset(obj); |
| |
| drm_gem_object_put(obj); |
| |
| return ret; |
| } |
| |
| static const struct drm_ioctl_desc ioctls[DRM_COMMAND_END - DRM_COMMAND_BASE] = { |
| DRM_IOCTL_DEF_DRV(OMAP_GET_PARAM, ioctl_get_param, |
| DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(OMAP_SET_PARAM, drm_invalid_op, |
| DRM_AUTH | DRM_MASTER | DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(OMAP_GEM_NEW, ioctl_gem_new, |
| DRM_RENDER_ALLOW), |
| /* Deprecated, to be removed. */ |
| DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_PREP, drm_noop, |
| DRM_RENDER_ALLOW), |
| /* Deprecated, to be removed. */ |
| DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_FINI, drm_noop, |
| DRM_RENDER_ALLOW), |
| DRM_IOCTL_DEF_DRV(OMAP_GEM_INFO, ioctl_gem_info, |
| DRM_RENDER_ALLOW), |
| }; |
| |
| /* |
| * drm driver funcs |
| */ |
| |
| static int dev_open(struct drm_device *dev, struct drm_file *file) |
| { |
| file->driver_priv = NULL; |
| |
| DBG("open: dev=%p, file=%p", dev, file); |
| |
| return 0; |
| } |
| |
| DEFINE_DRM_GEM_FOPS(omapdriver_fops); |
| |
| static const struct drm_driver omap_drm_driver = { |
| .driver_features = DRIVER_MODESET | DRIVER_GEM | |
| DRIVER_ATOMIC | DRIVER_RENDER, |
| .open = dev_open, |
| #ifdef CONFIG_DEBUG_FS |
| .debugfs_init = omap_debugfs_init, |
| #endif |
| .gem_prime_import = omap_gem_prime_import, |
| .dumb_create = omap_gem_dumb_create, |
| .dumb_map_offset = omap_gem_dumb_map_offset, |
| .ioctls = ioctls, |
| .num_ioctls = DRM_OMAP_NUM_IOCTLS, |
| .fops = &omapdriver_fops, |
| .name = DRIVER_NAME, |
| .desc = DRIVER_DESC, |
| .date = DRIVER_DATE, |
| .major = DRIVER_MAJOR, |
| .minor = DRIVER_MINOR, |
| .patchlevel = DRIVER_PATCHLEVEL, |
| }; |
| |
| static const struct soc_device_attribute omapdrm_soc_devices[] = { |
| { .family = "OMAP3", .data = (void *)0x3430 }, |
| { .family = "OMAP4", .data = (void *)0x4430 }, |
| { .family = "OMAP5", .data = (void *)0x5430 }, |
| { .family = "DRA7", .data = (void *)0x0752 }, |
| { /* sentinel */ } |
| }; |
| |
| static int omapdrm_init(struct omap_drm_private *priv, struct device *dev) |
| { |
| const struct soc_device_attribute *soc; |
| struct dss_pdata *pdata = dev->platform_data; |
| struct drm_device *ddev; |
| int ret; |
| |
| DBG("%s", dev_name(dev)); |
| |
| if (drm_firmware_drivers_only()) |
| return -ENODEV; |
| |
| /* Allocate and initialize the DRM device. */ |
| ddev = drm_dev_alloc(&omap_drm_driver, dev); |
| if (IS_ERR(ddev)) |
| return PTR_ERR(ddev); |
| |
| priv->ddev = ddev; |
| ddev->dev_private = priv; |
| |
| priv->dev = dev; |
| priv->dss = pdata->dss; |
| priv->dispc = dispc_get_dispc(priv->dss); |
| |
| priv->dss->mgr_ops_priv = priv; |
| |
| soc = soc_device_match(omapdrm_soc_devices); |
| priv->omaprev = soc ? (uintptr_t)soc->data : 0; |
| priv->wq = alloc_ordered_workqueue("omapdrm", 0); |
| if (!priv->wq) { |
| ret = -ENOMEM; |
| goto err_alloc_workqueue; |
| } |
| |
| mutex_init(&priv->list_lock); |
| INIT_LIST_HEAD(&priv->obj_list); |
| |
| /* Get memory bandwidth limits */ |
| priv->max_bandwidth = dispc_get_memory_bandwidth_limit(priv->dispc); |
| |
| omap_gem_init(ddev); |
| |
| drm_mode_config_init(ddev); |
| |
| ret = omap_global_obj_init(ddev); |
| if (ret) |
| goto err_gem_deinit; |
| |
| ret = omap_hwoverlays_init(priv); |
| if (ret) |
| goto err_free_priv_obj; |
| |
| ret = omap_modeset_init(ddev); |
| if (ret) { |
| dev_err(priv->dev, "omap_modeset_init failed: ret=%d\n", ret); |
| goto err_free_overlays; |
| } |
| |
| /* Initialize vblank handling, start with all CRTCs disabled. */ |
| ret = drm_vblank_init(ddev, priv->num_pipes); |
| if (ret) { |
| dev_err(priv->dev, "could not init vblank\n"); |
| goto err_cleanup_modeset; |
| } |
| |
| drm_kms_helper_poll_init(ddev); |
| |
| /* |
| * Register the DRM device with the core and the connectors with |
| * sysfs. |
| */ |
| ret = drm_dev_register(ddev, 0); |
| if (ret) |
| goto err_cleanup_helpers; |
| |
| omap_fbdev_setup(ddev); |
| |
| return 0; |
| |
| err_cleanup_helpers: |
| drm_kms_helper_poll_fini(ddev); |
| err_cleanup_modeset: |
| omap_modeset_fini(ddev); |
| err_free_overlays: |
| omap_hwoverlays_destroy(priv); |
| err_free_priv_obj: |
| omap_global_obj_fini(priv); |
| err_gem_deinit: |
| drm_mode_config_cleanup(ddev); |
| omap_gem_deinit(ddev); |
| destroy_workqueue(priv->wq); |
| err_alloc_workqueue: |
| omap_disconnect_pipelines(ddev); |
| drm_dev_put(ddev); |
| return ret; |
| } |
| |
| static void omapdrm_cleanup(struct omap_drm_private *priv) |
| { |
| struct drm_device *ddev = priv->ddev; |
| |
| DBG(""); |
| |
| drm_dev_unregister(ddev); |
| |
| drm_kms_helper_poll_fini(ddev); |
| |
| drm_atomic_helper_shutdown(ddev); |
| |
| omap_modeset_fini(ddev); |
| omap_hwoverlays_destroy(priv); |
| omap_global_obj_fini(priv); |
| drm_mode_config_cleanup(ddev); |
| omap_gem_deinit(ddev); |
| |
| destroy_workqueue(priv->wq); |
| |
| omap_disconnect_pipelines(ddev); |
| |
| drm_dev_put(ddev); |
| } |
| |
| static int pdev_probe(struct platform_device *pdev) |
| { |
| struct omap_drm_private *priv; |
| int ret; |
| |
| ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to set the DMA mask\n"); |
| return ret; |
| } |
| |
| /* Allocate and initialize the driver private structure. */ |
| priv = kzalloc(sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, priv); |
| |
| ret = omapdrm_init(priv, &pdev->dev); |
| if (ret < 0) |
| kfree(priv); |
| |
| return ret; |
| } |
| |
| static void pdev_remove(struct platform_device *pdev) |
| { |
| struct omap_drm_private *priv = platform_get_drvdata(pdev); |
| |
| omapdrm_cleanup(priv); |
| kfree(priv); |
| } |
| |
| static void pdev_shutdown(struct platform_device *pdev) |
| { |
| struct omap_drm_private *priv = platform_get_drvdata(pdev); |
| |
| drm_atomic_helper_shutdown(priv->ddev); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int omap_drm_suspend(struct device *dev) |
| { |
| struct omap_drm_private *priv = dev_get_drvdata(dev); |
| struct drm_device *drm_dev = priv->ddev; |
| |
| return drm_mode_config_helper_suspend(drm_dev); |
| } |
| |
| static int omap_drm_resume(struct device *dev) |
| { |
| struct omap_drm_private *priv = dev_get_drvdata(dev); |
| struct drm_device *drm_dev = priv->ddev; |
| |
| drm_mode_config_helper_resume(drm_dev); |
| |
| return omap_gem_resume(drm_dev); |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(omapdrm_pm_ops, omap_drm_suspend, omap_drm_resume); |
| |
| static struct platform_driver pdev = { |
| .driver = { |
| .name = "omapdrm", |
| .pm = &omapdrm_pm_ops, |
| }, |
| .probe = pdev_probe, |
| .remove_new = pdev_remove, |
| .shutdown = pdev_shutdown, |
| }; |
| |
| static struct platform_driver * const drivers[] = { |
| &omap_dmm_driver, |
| &pdev, |
| }; |
| |
| static int __init omap_drm_init(void) |
| { |
| int r; |
| |
| DBG("init"); |
| |
| r = omap_dss_init(); |
| if (r) |
| return r; |
| |
| r = platform_register_drivers(drivers, ARRAY_SIZE(drivers)); |
| if (r) { |
| omap_dss_exit(); |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit omap_drm_fini(void) |
| { |
| DBG("fini"); |
| |
| platform_unregister_drivers(drivers, ARRAY_SIZE(drivers)); |
| |
| omap_dss_exit(); |
| } |
| |
| module_init(omap_drm_init); |
| module_exit(omap_drm_fini); |
| |
| MODULE_AUTHOR("Rob Clark <rob@ti.com>"); |
| MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>"); |
| MODULE_DESCRIPTION("OMAP DRM Display Driver"); |
| MODULE_ALIAS("platform:" DRIVER_NAME); |
| MODULE_LICENSE("GPL v2"); |