| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * This driver enables Trace Buffer Extension (TRBE) as a per-cpu coresight |
| * sink device could then pair with an appropriate per-cpu coresight source |
| * device (ETE) thus generating required trace data. Trace can be enabled |
| * via the perf framework. |
| * |
| * The AUX buffer handling is inspired from Arm SPE PMU driver. |
| * |
| * Copyright (C) 2020 ARM Ltd. |
| * |
| * Author: Anshuman Khandual <anshuman.khandual@arm.com> |
| */ |
| #define DRVNAME "arm_trbe" |
| |
| #define pr_fmt(fmt) DRVNAME ": " fmt |
| |
| #include <asm/barrier.h> |
| #include <asm/cpufeature.h> |
| #include <linux/vmalloc.h> |
| |
| #include "coresight-self-hosted-trace.h" |
| #include "coresight-trbe.h" |
| |
| #define PERF_IDX2OFF(idx, buf) ((idx) % ((buf)->nr_pages << PAGE_SHIFT)) |
| |
| /* |
| * A padding packet that will help the user space tools |
| * in skipping relevant sections in the captured trace |
| * data which could not be decoded. TRBE doesn't support |
| * formatting the trace data, unlike the legacy CoreSight |
| * sinks and thus we use ETE trace packets to pad the |
| * sections of the buffer. |
| */ |
| #define ETE_IGNORE_PACKET 0x70 |
| |
| /* |
| * Minimum amount of meaningful trace will contain: |
| * A-Sync, Trace Info, Trace On, Address, Atom. |
| * This is about 44bytes of ETE trace. To be on |
| * the safer side, we assume 64bytes is the minimum |
| * space required for a meaningful session, before |
| * we hit a "WRAP" event. |
| */ |
| #define TRBE_TRACE_MIN_BUF_SIZE 64 |
| |
| enum trbe_fault_action { |
| TRBE_FAULT_ACT_WRAP, |
| TRBE_FAULT_ACT_SPURIOUS, |
| TRBE_FAULT_ACT_FATAL, |
| }; |
| |
| struct trbe_buf { |
| /* |
| * Even though trbe_base represents vmap() |
| * mapped allocated buffer's start address, |
| * it's being as unsigned long for various |
| * arithmetic and comparision operations & |
| * also to be consistent with trbe_write & |
| * trbe_limit sibling pointers. |
| */ |
| unsigned long trbe_base; |
| /* The base programmed into the TRBE */ |
| unsigned long trbe_hw_base; |
| unsigned long trbe_limit; |
| unsigned long trbe_write; |
| int nr_pages; |
| void **pages; |
| bool snapshot; |
| struct trbe_cpudata *cpudata; |
| }; |
| |
| /* |
| * TRBE erratum list |
| * |
| * The errata are defined in arm64 generic cpu_errata framework. |
| * Since the errata work arounds could be applied individually |
| * to the affected CPUs inside the TRBE driver, we need to know if |
| * a given CPU is affected by the erratum. Unlike the other erratum |
| * work arounds, TRBE driver needs to check multiple times during |
| * a trace session. Thus we need a quicker access to per-CPU |
| * errata and not issue costly this_cpu_has_cap() everytime. |
| * We keep a set of the affected errata in trbe_cpudata, per TRBE. |
| * |
| * We rely on the corresponding cpucaps to be defined for a given |
| * TRBE erratum. We map the given cpucap into a TRBE internal number |
| * to make the tracking of the errata lean. |
| * |
| * This helps in : |
| * - Not duplicating the detection logic |
| * - Streamlined detection of erratum across the system |
| */ |
| #define TRBE_WORKAROUND_OVERWRITE_FILL_MODE 0 |
| #define TRBE_WORKAROUND_WRITE_OUT_OF_RANGE 1 |
| #define TRBE_NEEDS_DRAIN_AFTER_DISABLE 2 |
| #define TRBE_NEEDS_CTXT_SYNC_AFTER_ENABLE 3 |
| #define TRBE_IS_BROKEN 4 |
| |
| static int trbe_errata_cpucaps[] = { |
| [TRBE_WORKAROUND_OVERWRITE_FILL_MODE] = ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE, |
| [TRBE_WORKAROUND_WRITE_OUT_OF_RANGE] = ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE, |
| [TRBE_NEEDS_DRAIN_AFTER_DISABLE] = ARM64_WORKAROUND_2064142, |
| [TRBE_NEEDS_CTXT_SYNC_AFTER_ENABLE] = ARM64_WORKAROUND_2038923, |
| [TRBE_IS_BROKEN] = ARM64_WORKAROUND_1902691, |
| -1, /* Sentinel, must be the last entry */ |
| }; |
| |
| /* The total number of listed errata in trbe_errata_cpucaps */ |
| #define TRBE_ERRATA_MAX (ARRAY_SIZE(trbe_errata_cpucaps) - 1) |
| |
| /* |
| * Safe limit for the number of bytes that may be overwritten |
| * when ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE is triggered. |
| */ |
| #define TRBE_WORKAROUND_OVERWRITE_FILL_MODE_SKIP_BYTES 256 |
| |
| /* |
| * struct trbe_cpudata: TRBE instance specific data |
| * @trbe_flag - TRBE dirty/access flag support |
| * @trbe_hw_align - Actual TRBE alignment required for TRBPTR_EL1. |
| * @trbe_align - Software alignment used for the TRBPTR_EL1. |
| * @cpu - CPU this TRBE belongs to. |
| * @mode - Mode of current operation. (perf/disabled) |
| * @drvdata - TRBE specific drvdata |
| * @errata - Bit map for the errata on this TRBE. |
| */ |
| struct trbe_cpudata { |
| bool trbe_flag; |
| u64 trbe_hw_align; |
| u64 trbe_align; |
| int cpu; |
| enum cs_mode mode; |
| struct trbe_buf *buf; |
| struct trbe_drvdata *drvdata; |
| DECLARE_BITMAP(errata, TRBE_ERRATA_MAX); |
| }; |
| |
| struct trbe_drvdata { |
| struct trbe_cpudata __percpu *cpudata; |
| struct perf_output_handle * __percpu *handle; |
| struct hlist_node hotplug_node; |
| int irq; |
| cpumask_t supported_cpus; |
| enum cpuhp_state trbe_online; |
| struct platform_device *pdev; |
| }; |
| |
| static void trbe_check_errata(struct trbe_cpudata *cpudata) |
| { |
| int i; |
| |
| for (i = 0; i < TRBE_ERRATA_MAX; i++) { |
| int cap = trbe_errata_cpucaps[i]; |
| |
| if (WARN_ON_ONCE(cap < 0)) |
| return; |
| if (this_cpu_has_cap(cap)) |
| set_bit(i, cpudata->errata); |
| } |
| } |
| |
| static inline bool trbe_has_erratum(struct trbe_cpudata *cpudata, int i) |
| { |
| return (i < TRBE_ERRATA_MAX) && test_bit(i, cpudata->errata); |
| } |
| |
| static inline bool trbe_may_overwrite_in_fill_mode(struct trbe_cpudata *cpudata) |
| { |
| return trbe_has_erratum(cpudata, TRBE_WORKAROUND_OVERWRITE_FILL_MODE); |
| } |
| |
| static inline bool trbe_may_write_out_of_range(struct trbe_cpudata *cpudata) |
| { |
| return trbe_has_erratum(cpudata, TRBE_WORKAROUND_WRITE_OUT_OF_RANGE); |
| } |
| |
| static inline bool trbe_needs_drain_after_disable(struct trbe_cpudata *cpudata) |
| { |
| /* |
| * Errata affected TRBE implementation will need TSB CSYNC and |
| * DSB in order to prevent subsequent writes into certain TRBE |
| * system registers from being ignored and not effected. |
| */ |
| return trbe_has_erratum(cpudata, TRBE_NEEDS_DRAIN_AFTER_DISABLE); |
| } |
| |
| static inline bool trbe_needs_ctxt_sync_after_enable(struct trbe_cpudata *cpudata) |
| { |
| /* |
| * Errata affected TRBE implementation will need an additional |
| * context synchronization in order to prevent an inconsistent |
| * TRBE prohibited region view on the CPU which could possibly |
| * corrupt the TRBE buffer or the TRBE state. |
| */ |
| return trbe_has_erratum(cpudata, TRBE_NEEDS_CTXT_SYNC_AFTER_ENABLE); |
| } |
| |
| static inline bool trbe_is_broken(struct trbe_cpudata *cpudata) |
| { |
| return trbe_has_erratum(cpudata, TRBE_IS_BROKEN); |
| } |
| |
| static int trbe_alloc_node(struct perf_event *event) |
| { |
| if (event->cpu == -1) |
| return NUMA_NO_NODE; |
| return cpu_to_node(event->cpu); |
| } |
| |
| static inline void trbe_drain_buffer(void) |
| { |
| tsb_csync(); |
| dsb(nsh); |
| } |
| |
| static inline void set_trbe_enabled(struct trbe_cpudata *cpudata, u64 trblimitr) |
| { |
| /* |
| * Enable the TRBE without clearing LIMITPTR which |
| * might be required for fetching the buffer limits. |
| */ |
| trblimitr |= TRBLIMITR_EL1_E; |
| write_sysreg_s(trblimitr, SYS_TRBLIMITR_EL1); |
| |
| /* Synchronize the TRBE enable event */ |
| isb(); |
| |
| if (trbe_needs_ctxt_sync_after_enable(cpudata)) |
| isb(); |
| } |
| |
| static inline void set_trbe_disabled(struct trbe_cpudata *cpudata) |
| { |
| u64 trblimitr = read_sysreg_s(SYS_TRBLIMITR_EL1); |
| |
| /* |
| * Disable the TRBE without clearing LIMITPTR which |
| * might be required for fetching the buffer limits. |
| */ |
| trblimitr &= ~TRBLIMITR_EL1_E; |
| write_sysreg_s(trblimitr, SYS_TRBLIMITR_EL1); |
| |
| if (trbe_needs_drain_after_disable(cpudata)) |
| trbe_drain_buffer(); |
| isb(); |
| } |
| |
| static void trbe_drain_and_disable_local(struct trbe_cpudata *cpudata) |
| { |
| trbe_drain_buffer(); |
| set_trbe_disabled(cpudata); |
| } |
| |
| static void trbe_reset_local(struct trbe_cpudata *cpudata) |
| { |
| trbe_drain_and_disable_local(cpudata); |
| write_sysreg_s(0, SYS_TRBLIMITR_EL1); |
| write_sysreg_s(0, SYS_TRBPTR_EL1); |
| write_sysreg_s(0, SYS_TRBBASER_EL1); |
| write_sysreg_s(0, SYS_TRBSR_EL1); |
| } |
| |
| static void trbe_report_wrap_event(struct perf_output_handle *handle) |
| { |
| /* |
| * Mark the buffer to indicate that there was a WRAP event by |
| * setting the COLLISION flag. This indicates to the user that |
| * the TRBE trace collection was stopped without stopping the |
| * ETE and thus there might be some amount of trace that was |
| * lost between the time the WRAP was detected and the IRQ |
| * was consumed by the CPU. |
| * |
| * Setting the TRUNCATED flag would move the event to STOPPED |
| * state unnecessarily, even when there is space left in the |
| * ring buffer. Using the COLLISION flag doesn't have this side |
| * effect. We only set TRUNCATED flag when there is no space |
| * left in the ring buffer. |
| */ |
| perf_aux_output_flag(handle, PERF_AUX_FLAG_COLLISION); |
| } |
| |
| static void trbe_stop_and_truncate_event(struct perf_output_handle *handle) |
| { |
| struct trbe_buf *buf = etm_perf_sink_config(handle); |
| |
| /* |
| * We cannot proceed with the buffer collection and we |
| * do not have any data for the current session. The |
| * etm_perf driver expects to close out the aux_buffer |
| * at event_stop(). So disable the TRBE here and leave |
| * the update_buffer() to return a 0 size. |
| */ |
| trbe_drain_and_disable_local(buf->cpudata); |
| perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED); |
| perf_aux_output_end(handle, 0); |
| *this_cpu_ptr(buf->cpudata->drvdata->handle) = NULL; |
| } |
| |
| /* |
| * TRBE Buffer Management |
| * |
| * The TRBE buffer spans from the base pointer till the limit pointer. When enabled, |
| * it starts writing trace data from the write pointer onward till the limit pointer. |
| * When the write pointer reaches the address just before the limit pointer, it gets |
| * wrapped around again to the base pointer. This is called a TRBE wrap event, which |
| * generates a maintenance interrupt when operated in WRAP or FILL mode. This driver |
| * uses FILL mode, where the TRBE stops the trace collection at wrap event. The IRQ |
| * handler updates the AUX buffer and re-enables the TRBE with updated WRITE and |
| * LIMIT pointers. |
| * |
| * Wrap around with an IRQ |
| * ------ < ------ < ------- < ----- < ----- |
| * | | |
| * ------ > ------ > ------- > ----- > ----- |
| * |
| * +---------------+-----------------------+ |
| * | | | |
| * +---------------+-----------------------+ |
| * Base Pointer Write Pointer Limit Pointer |
| * |
| * The base and limit pointers always needs to be PAGE_SIZE aligned. But the write |
| * pointer can be aligned to the implementation defined TRBE trace buffer alignment |
| * as captured in trbe_cpudata->trbe_align. |
| * |
| * |
| * head tail wakeup |
| * +---------------------------------------+----- ~ ~ ------ |
| * |$$$$$$$|################|$$$$$$$$$$$$$$| | |
| * +---------------------------------------+----- ~ ~ ------ |
| * Base Pointer Write Pointer Limit Pointer |
| * |
| * The perf_output_handle indices (head, tail, wakeup) are monotonically increasing |
| * values which tracks all the driver writes and user reads from the perf auxiliary |
| * buffer. Generally [head..tail] is the area where the driver can write into unless |
| * the wakeup is behind the tail. Enabled TRBE buffer span needs to be adjusted and |
| * configured depending on the perf_output_handle indices, so that the driver does |
| * not override into areas in the perf auxiliary buffer which is being or yet to be |
| * consumed from the user space. The enabled TRBE buffer area is a moving subset of |
| * the allocated perf auxiliary buffer. |
| */ |
| |
| static void __trbe_pad_buf(struct trbe_buf *buf, u64 offset, int len) |
| { |
| memset((void *)buf->trbe_base + offset, ETE_IGNORE_PACKET, len); |
| } |
| |
| static void trbe_pad_buf(struct perf_output_handle *handle, int len) |
| { |
| struct trbe_buf *buf = etm_perf_sink_config(handle); |
| u64 head = PERF_IDX2OFF(handle->head, buf); |
| |
| __trbe_pad_buf(buf, head, len); |
| if (!buf->snapshot) |
| perf_aux_output_skip(handle, len); |
| } |
| |
| static unsigned long trbe_snapshot_offset(struct perf_output_handle *handle) |
| { |
| struct trbe_buf *buf = etm_perf_sink_config(handle); |
| |
| /* |
| * The ETE trace has alignment synchronization packets allowing |
| * the decoder to reset in case of an overflow or corruption. |
| * So we can use the entire buffer for the snapshot mode. |
| */ |
| return buf->nr_pages * PAGE_SIZE; |
| } |
| |
| static u64 trbe_min_trace_buf_size(struct perf_output_handle *handle) |
| { |
| u64 size = TRBE_TRACE_MIN_BUF_SIZE; |
| struct trbe_buf *buf = etm_perf_sink_config(handle); |
| struct trbe_cpudata *cpudata = buf->cpudata; |
| |
| /* |
| * When the TRBE is affected by an erratum that could make it |
| * write to the next "virtually addressed" page beyond the LIMIT. |
| * We need to make sure there is always a PAGE after the LIMIT, |
| * within the buffer. Thus we ensure there is at least an extra |
| * page than normal. With this we could then adjust the LIMIT |
| * pointer down by a PAGE later. |
| */ |
| if (trbe_may_write_out_of_range(cpudata)) |
| size += PAGE_SIZE; |
| return size; |
| } |
| |
| /* |
| * TRBE Limit Calculation |
| * |
| * The following markers are used to illustrate various TRBE buffer situations. |
| * |
| * $$$$ - Data area, unconsumed captured trace data, not to be overridden |
| * #### - Free area, enabled, trace will be written |
| * %%%% - Free area, disabled, trace will not be written |
| * ==== - Free area, padded with ETE_IGNORE_PACKET, trace will be skipped |
| */ |
| static unsigned long __trbe_normal_offset(struct perf_output_handle *handle) |
| { |
| struct trbe_buf *buf = etm_perf_sink_config(handle); |
| struct trbe_cpudata *cpudata = buf->cpudata; |
| const u64 bufsize = buf->nr_pages * PAGE_SIZE; |
| u64 limit = bufsize; |
| u64 head, tail, wakeup; |
| |
| head = PERF_IDX2OFF(handle->head, buf); |
| |
| /* |
| * head |
| * ------->| |
| * | |
| * head TRBE align tail |
| * +----|-------|---------------|-------+ |
| * |$$$$|=======|###############|$$$$$$$| |
| * +----|-------|---------------|-------+ |
| * trbe_base trbe_base + nr_pages |
| * |
| * Perf aux buffer output head position can be misaligned depending on |
| * various factors including user space reads. In case misaligned, head |
| * needs to be aligned before TRBE can be configured. Pad the alignment |
| * gap with ETE_IGNORE_PACKET bytes that will be ignored by user tools |
| * and skip this section thus advancing the head. |
| */ |
| if (!IS_ALIGNED(head, cpudata->trbe_align)) { |
| unsigned long delta = roundup(head, cpudata->trbe_align) - head; |
| |
| delta = min(delta, handle->size); |
| trbe_pad_buf(handle, delta); |
| head = PERF_IDX2OFF(handle->head, buf); |
| } |
| |
| /* |
| * head = tail (size = 0) |
| * +----|-------------------------------+ |
| * |$$$$|$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ | |
| * +----|-------------------------------+ |
| * trbe_base trbe_base + nr_pages |
| * |
| * Perf aux buffer does not have any space for the driver to write into. |
| */ |
| if (!handle->size) |
| return 0; |
| |
| /* Compute the tail and wakeup indices now that we've aligned head */ |
| tail = PERF_IDX2OFF(handle->head + handle->size, buf); |
| wakeup = PERF_IDX2OFF(handle->wakeup, buf); |
| |
| /* |
| * Lets calculate the buffer area which TRBE could write into. There |
| * are three possible scenarios here. Limit needs to be aligned with |
| * PAGE_SIZE per the TRBE requirement. Always avoid clobbering the |
| * unconsumed data. |
| * |
| * 1) head < tail |
| * |
| * head tail |
| * +----|-----------------------|-------+ |
| * |$$$$|#######################|$$$$$$$| |
| * +----|-----------------------|-------+ |
| * trbe_base limit trbe_base + nr_pages |
| * |
| * TRBE could write into [head..tail] area. Unless the tail is right at |
| * the end of the buffer, neither an wrap around nor an IRQ is expected |
| * while being enabled. |
| * |
| * 2) head == tail |
| * |
| * head = tail (size > 0) |
| * +----|-------------------------------+ |
| * |%%%%|###############################| |
| * +----|-------------------------------+ |
| * trbe_base limit = trbe_base + nr_pages |
| * |
| * TRBE should just write into [head..base + nr_pages] area even though |
| * the entire buffer is empty. Reason being, when the trace reaches the |
| * end of the buffer, it will just wrap around with an IRQ giving an |
| * opportunity to reconfigure the buffer. |
| * |
| * 3) tail < head |
| * |
| * tail head |
| * +----|-----------------------|-------+ |
| * |%%%%|$$$$$$$$$$$$$$$$$$$$$$$|#######| |
| * +----|-----------------------|-------+ |
| * trbe_base limit = trbe_base + nr_pages |
| * |
| * TRBE should just write into [head..base + nr_pages] area even though |
| * the [trbe_base..tail] is also empty. Reason being, when the trace |
| * reaches the end of the buffer, it will just wrap around with an IRQ |
| * giving an opportunity to reconfigure the buffer. |
| */ |
| if (head < tail) |
| limit = round_down(tail, PAGE_SIZE); |
| |
| /* |
| * Wakeup may be arbitrarily far into the future. If it's not in the |
| * current generation, either we'll wrap before hitting it, or it's |
| * in the past and has been handled already. |
| * |
| * If there's a wakeup before we wrap, arrange to be woken up by the |
| * page boundary following it. Keep the tail boundary if that's lower. |
| * |
| * head wakeup tail |
| * +----|---------------|-------|-------+ |
| * |$$$$|###############|%%%%%%%|$$$$$$$| |
| * +----|---------------|-------|-------+ |
| * trbe_base limit trbe_base + nr_pages |
| */ |
| if (handle->wakeup < (handle->head + handle->size) && head <= wakeup) |
| limit = min(limit, round_up(wakeup, PAGE_SIZE)); |
| |
| /* |
| * There are two situation when this can happen i.e limit is before |
| * the head and hence TRBE cannot be configured. |
| * |
| * 1) head < tail (aligned down with PAGE_SIZE) and also they are both |
| * within the same PAGE size range. |
| * |
| * PAGE_SIZE |
| * |----------------------| |
| * |
| * limit head tail |
| * +------------|------|--------|-------+ |
| * |$$$$$$$$$$$$$$$$$$$|========|$$$$$$$| |
| * +------------|------|--------|-------+ |
| * trbe_base trbe_base + nr_pages |
| * |
| * 2) head < wakeup (aligned up with PAGE_SIZE) < tail and also both |
| * head and wakeup are within same PAGE size range. |
| * |
| * PAGE_SIZE |
| * |----------------------| |
| * |
| * limit head wakeup tail |
| * +----|------|-------|--------|-------+ |
| * |$$$$$$$$$$$|=======|========|$$$$$$$| |
| * +----|------|-------|--------|-------+ |
| * trbe_base trbe_base + nr_pages |
| */ |
| if (limit > head) |
| return limit; |
| |
| trbe_pad_buf(handle, handle->size); |
| return 0; |
| } |
| |
| static unsigned long trbe_normal_offset(struct perf_output_handle *handle) |
| { |
| struct trbe_buf *buf = etm_perf_sink_config(handle); |
| u64 limit = __trbe_normal_offset(handle); |
| u64 head = PERF_IDX2OFF(handle->head, buf); |
| |
| /* |
| * If the head is too close to the limit and we don't |
| * have space for a meaningful run, we rather pad it |
| * and start fresh. |
| * |
| * We might have to do this more than once to make sure |
| * we have enough required space. |
| */ |
| while (limit && ((limit - head) < trbe_min_trace_buf_size(handle))) { |
| trbe_pad_buf(handle, limit - head); |
| limit = __trbe_normal_offset(handle); |
| head = PERF_IDX2OFF(handle->head, buf); |
| } |
| return limit; |
| } |
| |
| static unsigned long compute_trbe_buffer_limit(struct perf_output_handle *handle) |
| { |
| struct trbe_buf *buf = etm_perf_sink_config(handle); |
| unsigned long offset; |
| |
| if (buf->snapshot) |
| offset = trbe_snapshot_offset(handle); |
| else |
| offset = trbe_normal_offset(handle); |
| return buf->trbe_base + offset; |
| } |
| |
| static void clr_trbe_status(void) |
| { |
| u64 trbsr = read_sysreg_s(SYS_TRBSR_EL1); |
| |
| WARN_ON(is_trbe_enabled()); |
| trbsr &= ~TRBSR_EL1_IRQ; |
| trbsr &= ~TRBSR_EL1_TRG; |
| trbsr &= ~TRBSR_EL1_WRAP; |
| trbsr &= ~TRBSR_EL1_EC_MASK; |
| trbsr &= ~TRBSR_EL1_BSC_MASK; |
| trbsr &= ~TRBSR_EL1_S; |
| write_sysreg_s(trbsr, SYS_TRBSR_EL1); |
| } |
| |
| static void set_trbe_limit_pointer_enabled(struct trbe_buf *buf) |
| { |
| u64 trblimitr = read_sysreg_s(SYS_TRBLIMITR_EL1); |
| unsigned long addr = buf->trbe_limit; |
| |
| WARN_ON(!IS_ALIGNED(addr, (1UL << TRBLIMITR_EL1_LIMIT_SHIFT))); |
| WARN_ON(!IS_ALIGNED(addr, PAGE_SIZE)); |
| |
| trblimitr &= ~TRBLIMITR_EL1_nVM; |
| trblimitr &= ~TRBLIMITR_EL1_FM_MASK; |
| trblimitr &= ~TRBLIMITR_EL1_TM_MASK; |
| trblimitr &= ~TRBLIMITR_EL1_LIMIT_MASK; |
| |
| /* |
| * Fill trace buffer mode is used here while configuring the |
| * TRBE for trace capture. In this particular mode, the trace |
| * collection is stopped and a maintenance interrupt is raised |
| * when the current write pointer wraps. This pause in trace |
| * collection gives the software an opportunity to capture the |
| * trace data in the interrupt handler, before reconfiguring |
| * the TRBE. |
| */ |
| trblimitr |= (TRBLIMITR_EL1_FM_FILL << TRBLIMITR_EL1_FM_SHIFT) & |
| TRBLIMITR_EL1_FM_MASK; |
| |
| /* |
| * Trigger mode is not used here while configuring the TRBE for |
| * the trace capture. Hence just keep this in the ignore mode. |
| */ |
| trblimitr |= (TRBLIMITR_EL1_TM_IGNR << TRBLIMITR_EL1_TM_SHIFT) & |
| TRBLIMITR_EL1_TM_MASK; |
| trblimitr |= (addr & PAGE_MASK); |
| set_trbe_enabled(buf->cpudata, trblimitr); |
| } |
| |
| static void trbe_enable_hw(struct trbe_buf *buf) |
| { |
| WARN_ON(buf->trbe_hw_base < buf->trbe_base); |
| WARN_ON(buf->trbe_write < buf->trbe_hw_base); |
| WARN_ON(buf->trbe_write >= buf->trbe_limit); |
| set_trbe_disabled(buf->cpudata); |
| clr_trbe_status(); |
| set_trbe_base_pointer(buf->trbe_hw_base); |
| set_trbe_write_pointer(buf->trbe_write); |
| |
| /* |
| * Synchronize all the register updates |
| * till now before enabling the TRBE. |
| */ |
| isb(); |
| set_trbe_limit_pointer_enabled(buf); |
| } |
| |
| static enum trbe_fault_action trbe_get_fault_act(struct perf_output_handle *handle, |
| u64 trbsr) |
| { |
| int ec = get_trbe_ec(trbsr); |
| int bsc = get_trbe_bsc(trbsr); |
| struct trbe_buf *buf = etm_perf_sink_config(handle); |
| struct trbe_cpudata *cpudata = buf->cpudata; |
| |
| WARN_ON(is_trbe_running(trbsr)); |
| if (is_trbe_trg(trbsr) || is_trbe_abort(trbsr)) |
| return TRBE_FAULT_ACT_FATAL; |
| |
| if ((ec == TRBE_EC_STAGE1_ABORT) || (ec == TRBE_EC_STAGE2_ABORT)) |
| return TRBE_FAULT_ACT_FATAL; |
| |
| /* |
| * If the trbe is affected by TRBE_WORKAROUND_OVERWRITE_FILL_MODE, |
| * it might write data after a WRAP event in the fill mode. |
| * Thus the check TRBPTR == TRBBASER will not be honored. |
| */ |
| if ((is_trbe_wrap(trbsr) && (ec == TRBE_EC_OTHERS) && (bsc == TRBE_BSC_FILLED)) && |
| (trbe_may_overwrite_in_fill_mode(cpudata) || |
| get_trbe_write_pointer() == get_trbe_base_pointer())) |
| return TRBE_FAULT_ACT_WRAP; |
| |
| return TRBE_FAULT_ACT_SPURIOUS; |
| } |
| |
| static unsigned long trbe_get_trace_size(struct perf_output_handle *handle, |
| struct trbe_buf *buf, bool wrap) |
| { |
| u64 write; |
| u64 start_off, end_off; |
| u64 size; |
| u64 overwrite_skip = TRBE_WORKAROUND_OVERWRITE_FILL_MODE_SKIP_BYTES; |
| |
| /* |
| * If the TRBE has wrapped around the write pointer has |
| * wrapped and should be treated as limit. |
| * |
| * When the TRBE is affected by TRBE_WORKAROUND_WRITE_OUT_OF_RANGE, |
| * it may write upto 64bytes beyond the "LIMIT". The driver already |
| * keeps a valid page next to the LIMIT and we could potentially |
| * consume the trace data that may have been collected there. But we |
| * cannot be really sure it is available, and the TRBPTR may not |
| * indicate the same. Also, affected cores are also affected by another |
| * erratum which forces the PAGE_SIZE alignment on the TRBPTR, and thus |
| * could potentially pad an entire PAGE_SIZE - 64bytes, to get those |
| * 64bytes. Thus we ignore the potential triggering of the erratum |
| * on WRAP and limit the data to LIMIT. |
| */ |
| if (wrap) |
| write = get_trbe_limit_pointer(); |
| else |
| write = get_trbe_write_pointer(); |
| |
| /* |
| * TRBE may use a different base address than the base |
| * of the ring buffer. Thus use the beginning of the ring |
| * buffer to compute the offsets. |
| */ |
| end_off = write - buf->trbe_base; |
| start_off = PERF_IDX2OFF(handle->head, buf); |
| |
| if (WARN_ON_ONCE(end_off < start_off)) |
| return 0; |
| |
| size = end_off - start_off; |
| /* |
| * If the TRBE is affected by the following erratum, we must fill |
| * the space we skipped with IGNORE packets. And we are always |
| * guaranteed to have at least a PAGE_SIZE space in the buffer. |
| */ |
| if (trbe_has_erratum(buf->cpudata, TRBE_WORKAROUND_OVERWRITE_FILL_MODE) && |
| !WARN_ON(size < overwrite_skip)) |
| __trbe_pad_buf(buf, start_off, overwrite_skip); |
| |
| return size; |
| } |
| |
| static void *arm_trbe_alloc_buffer(struct coresight_device *csdev, |
| struct perf_event *event, void **pages, |
| int nr_pages, bool snapshot) |
| { |
| struct trbe_buf *buf; |
| struct page **pglist; |
| int i; |
| |
| /* |
| * TRBE LIMIT and TRBE WRITE pointers must be page aligned. But with |
| * just a single page, there would not be any room left while writing |
| * into a partially filled TRBE buffer after the page size alignment. |
| * Hence restrict the minimum buffer size as two pages. |
| */ |
| if (nr_pages < 2) |
| return NULL; |
| |
| buf = kzalloc_node(sizeof(*buf), GFP_KERNEL, trbe_alloc_node(event)); |
| if (!buf) |
| return ERR_PTR(-ENOMEM); |
| |
| pglist = kcalloc(nr_pages, sizeof(*pglist), GFP_KERNEL); |
| if (!pglist) { |
| kfree(buf); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| for (i = 0; i < nr_pages; i++) |
| pglist[i] = virt_to_page(pages[i]); |
| |
| buf->trbe_base = (unsigned long)vmap(pglist, nr_pages, VM_MAP, PAGE_KERNEL); |
| if (!buf->trbe_base) { |
| kfree(pglist); |
| kfree(buf); |
| return ERR_PTR(-ENOMEM); |
| } |
| buf->trbe_limit = buf->trbe_base + nr_pages * PAGE_SIZE; |
| buf->trbe_write = buf->trbe_base; |
| buf->snapshot = snapshot; |
| buf->nr_pages = nr_pages; |
| buf->pages = pages; |
| kfree(pglist); |
| return buf; |
| } |
| |
| static void arm_trbe_free_buffer(void *config) |
| { |
| struct trbe_buf *buf = config; |
| |
| vunmap((void *)buf->trbe_base); |
| kfree(buf); |
| } |
| |
| static unsigned long arm_trbe_update_buffer(struct coresight_device *csdev, |
| struct perf_output_handle *handle, |
| void *config) |
| { |
| struct trbe_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| struct trbe_cpudata *cpudata = dev_get_drvdata(&csdev->dev); |
| struct trbe_buf *buf = config; |
| enum trbe_fault_action act; |
| unsigned long size, status; |
| unsigned long flags; |
| bool wrap = false; |
| |
| WARN_ON(buf->cpudata != cpudata); |
| WARN_ON(cpudata->cpu != smp_processor_id()); |
| WARN_ON(cpudata->drvdata != drvdata); |
| if (cpudata->mode != CS_MODE_PERF) |
| return 0; |
| |
| /* |
| * We are about to disable the TRBE. And this could in turn |
| * fill up the buffer triggering, an IRQ. This could be consumed |
| * by the PE asynchronously, causing a race here against |
| * the IRQ handler in closing out the handle. So, let us |
| * make sure the IRQ can't trigger while we are collecting |
| * the buffer. We also make sure that a WRAP event is handled |
| * accordingly. |
| */ |
| local_irq_save(flags); |
| |
| /* |
| * If the TRBE was disabled due to lack of space in the AUX buffer or a |
| * spurious fault, the driver leaves it disabled, truncating the buffer. |
| * Since the etm_perf driver expects to close out the AUX buffer, the |
| * driver skips it. Thus, just pass in 0 size here to indicate that the |
| * buffer was truncated. |
| */ |
| if (!is_trbe_enabled()) { |
| size = 0; |
| goto done; |
| } |
| /* |
| * perf handle structure needs to be shared with the TRBE IRQ handler for |
| * capturing trace data and restarting the handle. There is a probability |
| * of an undefined reference based crash when etm event is being stopped |
| * while a TRBE IRQ also getting processed. This happens due the release |
| * of perf handle via perf_aux_output_end() in etm_event_stop(). Stopping |
| * the TRBE here will ensure that no IRQ could be generated when the perf |
| * handle gets freed in etm_event_stop(). |
| */ |
| trbe_drain_and_disable_local(cpudata); |
| |
| /* Check if there is a pending interrupt and handle it here */ |
| status = read_sysreg_s(SYS_TRBSR_EL1); |
| if (is_trbe_irq(status)) { |
| |
| /* |
| * Now that we are handling the IRQ here, clear the IRQ |
| * from the status, to let the irq handler know that it |
| * is taken care of. |
| */ |
| clr_trbe_irq(); |
| isb(); |
| |
| act = trbe_get_fault_act(handle, status); |
| /* |
| * If this was not due to a WRAP event, we have some |
| * errors and as such buffer is empty. |
| */ |
| if (act != TRBE_FAULT_ACT_WRAP) { |
| size = 0; |
| goto done; |
| } |
| |
| trbe_report_wrap_event(handle); |
| wrap = true; |
| } |
| |
| size = trbe_get_trace_size(handle, buf, wrap); |
| |
| done: |
| local_irq_restore(flags); |
| |
| if (buf->snapshot) |
| handle->head += size; |
| return size; |
| } |
| |
| |
| static int trbe_apply_work_around_before_enable(struct trbe_buf *buf) |
| { |
| /* |
| * TRBE_WORKAROUND_OVERWRITE_FILL_MODE causes the TRBE to overwrite a few cache |
| * line size from the "TRBBASER_EL1" in the event of a "FILL". |
| * Thus, we could loose some amount of the trace at the base. |
| * |
| * Before Fix: |
| * |
| * normal-BASE head (normal-TRBPTR) tail (normal-LIMIT) |
| * | \/ / |
| * ------------------------------------------------------------- |
| * | Pg0 | Pg1 | | | PgN | |
| * ------------------------------------------------------------- |
| * |
| * In the normal course of action, we would set the TRBBASER to the |
| * beginning of the ring-buffer (normal-BASE). But with the erratum, |
| * the TRBE could overwrite the contents at the "normal-BASE", after |
| * hitting the "normal-LIMIT", since it doesn't stop as expected. And |
| * this is wrong. This could result in overwriting trace collected in |
| * one of the previous runs, being consumed by the user. So we must |
| * always make sure that the TRBBASER is within the region |
| * [head, head+size]. Note that TRBBASER must be PAGE aligned, |
| * |
| * After moving the BASE: |
| * |
| * normal-BASE head (normal-TRBPTR) tail (normal-LIMIT) |
| * | \/ / |
| * ------------------------------------------------------------- |
| * | | |xyzdef. |.. tuvw| | |
| * ------------------------------------------------------------- |
| * / |
| * New-BASER |
| * |
| * Also, we would set the TRBPTR to head (after adjusting for |
| * alignment) at normal-PTR. This would mean that the last few bytes |
| * of the trace (say, "xyz") might overwrite the first few bytes of |
| * trace written ("abc"). More importantly they will appear in what |
| * userspace sees as the beginning of the trace, which is wrong. We may |
| * not always have space to move the latest trace "xyz" to the correct |
| * order as it must appear beyond the LIMIT. (i.e, [head..head+size]). |
| * Thus it is easier to ignore those bytes than to complicate the |
| * driver to move it, assuming that the erratum was triggered and |
| * doing additional checks to see if there is indeed allowed space at |
| * TRBLIMITR.LIMIT. |
| * |
| * Thus the full workaround will move the BASE and the PTR and would |
| * look like (after padding at the skipped bytes at the end of |
| * session) : |
| * |
| * normal-BASE head (normal-TRBPTR) tail (normal-LIMIT) |
| * | \/ / |
| * ------------------------------------------------------------- |
| * | | |///abc.. |.. rst| | |
| * ------------------------------------------------------------- |
| * / | |
| * New-BASER New-TRBPTR |
| * |
| * To summarize, with the work around: |
| * |
| * - We always align the offset for the next session to PAGE_SIZE |
| * (This is to ensure we can program the TRBBASER to this offset |
| * within the region [head...head+size]). |
| * |
| * - At TRBE enable: |
| * - Set the TRBBASER to the page aligned offset of the current |
| * proposed write offset. (which is guaranteed to be aligned |
| * as above) |
| * - Move the TRBPTR to skip first 256bytes (that might be |
| * overwritten with the erratum). This ensures that the trace |
| * generated in the session is not re-written. |
| * |
| * - At trace collection: |
| * - Pad the 256bytes skipped above again with IGNORE packets. |
| */ |
| if (trbe_has_erratum(buf->cpudata, TRBE_WORKAROUND_OVERWRITE_FILL_MODE)) { |
| if (WARN_ON(!IS_ALIGNED(buf->trbe_write, PAGE_SIZE))) |
| return -EINVAL; |
| buf->trbe_hw_base = buf->trbe_write; |
| buf->trbe_write += TRBE_WORKAROUND_OVERWRITE_FILL_MODE_SKIP_BYTES; |
| } |
| |
| /* |
| * TRBE_WORKAROUND_WRITE_OUT_OF_RANGE could cause the TRBE to write to |
| * the next page after the TRBLIMITR.LIMIT. For perf, the "next page" |
| * may be: |
| * - The page beyond the ring buffer. This could mean, TRBE could |
| * corrupt another entity (kernel / user) |
| * - A portion of the "ring buffer" consumed by the userspace. |
| * i.e, a page outisde [head, head + size]. |
| * |
| * We work around this by: |
| * - Making sure that we have at least an extra space of PAGE left |
| * in the ring buffer [head, head + size], than we normally do |
| * without the erratum. See trbe_min_trace_buf_size(). |
| * |
| * - Adjust the TRBLIMITR.LIMIT to leave the extra PAGE outside |
| * the TRBE's range (i.e [TRBBASER, TRBLIMITR.LIMI] ). |
| */ |
| if (trbe_has_erratum(buf->cpudata, TRBE_WORKAROUND_WRITE_OUT_OF_RANGE)) { |
| s64 space = buf->trbe_limit - buf->trbe_write; |
| /* |
| * We must have more than a PAGE_SIZE worth space in the proposed |
| * range for the TRBE. |
| */ |
| if (WARN_ON(space <= PAGE_SIZE || |
| !IS_ALIGNED(buf->trbe_limit, PAGE_SIZE))) |
| return -EINVAL; |
| buf->trbe_limit -= PAGE_SIZE; |
| } |
| |
| return 0; |
| } |
| |
| static int __arm_trbe_enable(struct trbe_buf *buf, |
| struct perf_output_handle *handle) |
| { |
| int ret = 0; |
| |
| perf_aux_output_flag(handle, PERF_AUX_FLAG_CORESIGHT_FORMAT_RAW); |
| buf->trbe_limit = compute_trbe_buffer_limit(handle); |
| buf->trbe_write = buf->trbe_base + PERF_IDX2OFF(handle->head, buf); |
| if (buf->trbe_limit == buf->trbe_base) { |
| ret = -ENOSPC; |
| goto err; |
| } |
| /* Set the base of the TRBE to the buffer base */ |
| buf->trbe_hw_base = buf->trbe_base; |
| |
| ret = trbe_apply_work_around_before_enable(buf); |
| if (ret) |
| goto err; |
| |
| *this_cpu_ptr(buf->cpudata->drvdata->handle) = handle; |
| trbe_enable_hw(buf); |
| return 0; |
| err: |
| trbe_stop_and_truncate_event(handle); |
| return ret; |
| } |
| |
| static int arm_trbe_enable(struct coresight_device *csdev, enum cs_mode mode, |
| void *data) |
| { |
| struct trbe_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| struct trbe_cpudata *cpudata = dev_get_drvdata(&csdev->dev); |
| struct perf_output_handle *handle = data; |
| struct trbe_buf *buf = etm_perf_sink_config(handle); |
| |
| WARN_ON(cpudata->cpu != smp_processor_id()); |
| WARN_ON(cpudata->drvdata != drvdata); |
| if (mode != CS_MODE_PERF) |
| return -EINVAL; |
| |
| cpudata->buf = buf; |
| cpudata->mode = mode; |
| buf->cpudata = cpudata; |
| |
| return __arm_trbe_enable(buf, handle); |
| } |
| |
| static int arm_trbe_disable(struct coresight_device *csdev) |
| { |
| struct trbe_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| struct trbe_cpudata *cpudata = dev_get_drvdata(&csdev->dev); |
| struct trbe_buf *buf = cpudata->buf; |
| |
| WARN_ON(buf->cpudata != cpudata); |
| WARN_ON(cpudata->cpu != smp_processor_id()); |
| WARN_ON(cpudata->drvdata != drvdata); |
| if (cpudata->mode != CS_MODE_PERF) |
| return -EINVAL; |
| |
| trbe_drain_and_disable_local(cpudata); |
| buf->cpudata = NULL; |
| cpudata->buf = NULL; |
| cpudata->mode = CS_MODE_DISABLED; |
| return 0; |
| } |
| |
| static void trbe_handle_spurious(struct perf_output_handle *handle) |
| { |
| struct trbe_buf *buf = etm_perf_sink_config(handle); |
| u64 trblimitr = read_sysreg_s(SYS_TRBLIMITR_EL1); |
| |
| /* |
| * If the IRQ was spurious, simply re-enable the TRBE |
| * back without modifying the buffer parameters to |
| * retain the trace collected so far. |
| */ |
| set_trbe_enabled(buf->cpudata, trblimitr); |
| } |
| |
| static int trbe_handle_overflow(struct perf_output_handle *handle) |
| { |
| struct perf_event *event = handle->event; |
| struct trbe_buf *buf = etm_perf_sink_config(handle); |
| unsigned long size; |
| struct etm_event_data *event_data; |
| |
| size = trbe_get_trace_size(handle, buf, true); |
| if (buf->snapshot) |
| handle->head += size; |
| |
| trbe_report_wrap_event(handle); |
| perf_aux_output_end(handle, size); |
| event_data = perf_aux_output_begin(handle, event); |
| if (!event_data) { |
| /* |
| * We are unable to restart the trace collection, |
| * thus leave the TRBE disabled. The etm-perf driver |
| * is able to detect this with a disconnected handle |
| * (handle->event = NULL). |
| */ |
| trbe_drain_and_disable_local(buf->cpudata); |
| *this_cpu_ptr(buf->cpudata->drvdata->handle) = NULL; |
| return -EINVAL; |
| } |
| |
| return __arm_trbe_enable(buf, handle); |
| } |
| |
| static bool is_perf_trbe(struct perf_output_handle *handle) |
| { |
| struct trbe_buf *buf = etm_perf_sink_config(handle); |
| struct trbe_cpudata *cpudata = buf->cpudata; |
| struct trbe_drvdata *drvdata = cpudata->drvdata; |
| int cpu = smp_processor_id(); |
| |
| WARN_ON(buf->trbe_hw_base != get_trbe_base_pointer()); |
| WARN_ON(buf->trbe_limit != get_trbe_limit_pointer()); |
| |
| if (cpudata->mode != CS_MODE_PERF) |
| return false; |
| |
| if (cpudata->cpu != cpu) |
| return false; |
| |
| if (!cpumask_test_cpu(cpu, &drvdata->supported_cpus)) |
| return false; |
| |
| return true; |
| } |
| |
| static irqreturn_t arm_trbe_irq_handler(int irq, void *dev) |
| { |
| struct perf_output_handle **handle_ptr = dev; |
| struct perf_output_handle *handle = *handle_ptr; |
| struct trbe_buf *buf = etm_perf_sink_config(handle); |
| enum trbe_fault_action act; |
| u64 status; |
| bool truncated = false; |
| u64 trfcr; |
| |
| /* Reads to TRBSR_EL1 is fine when TRBE is active */ |
| status = read_sysreg_s(SYS_TRBSR_EL1); |
| /* |
| * If the pending IRQ was handled by update_buffer callback |
| * we have nothing to do here. |
| */ |
| if (!is_trbe_irq(status)) |
| return IRQ_NONE; |
| |
| /* Prohibit the CPU from tracing before we disable the TRBE */ |
| trfcr = cpu_prohibit_trace(); |
| /* |
| * Ensure the trace is visible to the CPUs and |
| * any external aborts have been resolved. |
| */ |
| trbe_drain_and_disable_local(buf->cpudata); |
| clr_trbe_irq(); |
| isb(); |
| |
| if (WARN_ON_ONCE(!handle) || !perf_get_aux(handle)) |
| return IRQ_NONE; |
| |
| if (!is_perf_trbe(handle)) |
| return IRQ_NONE; |
| |
| act = trbe_get_fault_act(handle, status); |
| switch (act) { |
| case TRBE_FAULT_ACT_WRAP: |
| truncated = !!trbe_handle_overflow(handle); |
| break; |
| case TRBE_FAULT_ACT_SPURIOUS: |
| trbe_handle_spurious(handle); |
| break; |
| case TRBE_FAULT_ACT_FATAL: |
| trbe_stop_and_truncate_event(handle); |
| truncated = true; |
| break; |
| } |
| |
| /* |
| * If the buffer was truncated, ensure perf callbacks |
| * have completed, which will disable the event. |
| * |
| * Otherwise, restore the trace filter controls to |
| * allow the tracing. |
| */ |
| if (truncated) |
| irq_work_run(); |
| else |
| write_trfcr(trfcr); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct coresight_ops_sink arm_trbe_sink_ops = { |
| .enable = arm_trbe_enable, |
| .disable = arm_trbe_disable, |
| .alloc_buffer = arm_trbe_alloc_buffer, |
| .free_buffer = arm_trbe_free_buffer, |
| .update_buffer = arm_trbe_update_buffer, |
| }; |
| |
| static const struct coresight_ops arm_trbe_cs_ops = { |
| .sink_ops = &arm_trbe_sink_ops, |
| }; |
| |
| static ssize_t align_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct trbe_cpudata *cpudata = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%llx\n", cpudata->trbe_hw_align); |
| } |
| static DEVICE_ATTR_RO(align); |
| |
| static ssize_t flag_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct trbe_cpudata *cpudata = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", cpudata->trbe_flag); |
| } |
| static DEVICE_ATTR_RO(flag); |
| |
| static struct attribute *arm_trbe_attrs[] = { |
| &dev_attr_align.attr, |
| &dev_attr_flag.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group arm_trbe_group = { |
| .attrs = arm_trbe_attrs, |
| }; |
| |
| static const struct attribute_group *arm_trbe_groups[] = { |
| &arm_trbe_group, |
| NULL, |
| }; |
| |
| static void arm_trbe_enable_cpu(void *info) |
| { |
| struct trbe_drvdata *drvdata = info; |
| struct trbe_cpudata *cpudata = this_cpu_ptr(drvdata->cpudata); |
| |
| trbe_reset_local(cpudata); |
| enable_percpu_irq(drvdata->irq, IRQ_TYPE_NONE); |
| } |
| |
| static void arm_trbe_disable_cpu(void *info) |
| { |
| struct trbe_drvdata *drvdata = info; |
| struct trbe_cpudata *cpudata = this_cpu_ptr(drvdata->cpudata); |
| |
| disable_percpu_irq(drvdata->irq); |
| trbe_reset_local(cpudata); |
| } |
| |
| |
| static void arm_trbe_register_coresight_cpu(struct trbe_drvdata *drvdata, int cpu) |
| { |
| struct trbe_cpudata *cpudata = per_cpu_ptr(drvdata->cpudata, cpu); |
| struct coresight_device *trbe_csdev = coresight_get_percpu_sink(cpu); |
| struct coresight_desc desc = { 0 }; |
| struct device *dev; |
| |
| if (WARN_ON(trbe_csdev)) |
| return; |
| |
| /* If the TRBE was not probed on the CPU, we shouldn't be here */ |
| if (WARN_ON(!cpudata->drvdata)) |
| return; |
| |
| dev = &cpudata->drvdata->pdev->dev; |
| desc.name = devm_kasprintf(dev, GFP_KERNEL, "trbe%d", cpu); |
| if (!desc.name) |
| goto cpu_clear; |
| /* |
| * TRBE coresight devices do not need regular connections |
| * information, as the paths get built between all percpu |
| * source and their respective percpu sink devices. Though |
| * coresight_register() expect device connections via the |
| * platform_data, which TRBE devices do not have. As they |
| * are not real ACPI devices, coresight_get_platform_data() |
| * ends up failing. Instead let's allocate a dummy zeroed |
| * coresight_platform_data structure and assign that back |
| * into the device for that purpose. |
| */ |
| desc.pdata = devm_kzalloc(dev, sizeof(*desc.pdata), GFP_KERNEL); |
| if (IS_ERR(desc.pdata)) |
| goto cpu_clear; |
| |
| desc.type = CORESIGHT_DEV_TYPE_SINK; |
| desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_PERCPU_SYSMEM; |
| desc.ops = &arm_trbe_cs_ops; |
| desc.groups = arm_trbe_groups; |
| desc.dev = dev; |
| trbe_csdev = coresight_register(&desc); |
| if (IS_ERR(trbe_csdev)) |
| goto cpu_clear; |
| |
| dev_set_drvdata(&trbe_csdev->dev, cpudata); |
| coresight_set_percpu_sink(cpu, trbe_csdev); |
| return; |
| cpu_clear: |
| cpumask_clear_cpu(cpu, &drvdata->supported_cpus); |
| } |
| |
| /* |
| * Must be called with preemption disabled, for trbe_check_errata(). |
| */ |
| static void arm_trbe_probe_cpu(void *info) |
| { |
| struct trbe_drvdata *drvdata = info; |
| int cpu = smp_processor_id(); |
| struct trbe_cpudata *cpudata = per_cpu_ptr(drvdata->cpudata, cpu); |
| u64 trbidr; |
| |
| if (WARN_ON(!cpudata)) |
| goto cpu_clear; |
| |
| if (!is_trbe_available()) { |
| pr_err("TRBE is not implemented on cpu %d\n", cpu); |
| goto cpu_clear; |
| } |
| |
| trbidr = read_sysreg_s(SYS_TRBIDR_EL1); |
| if (!is_trbe_programmable(trbidr)) { |
| pr_err("TRBE is owned in higher exception level on cpu %d\n", cpu); |
| goto cpu_clear; |
| } |
| |
| cpudata->trbe_hw_align = 1ULL << get_trbe_address_align(trbidr); |
| if (cpudata->trbe_hw_align > SZ_2K) { |
| pr_err("Unsupported alignment on cpu %d\n", cpu); |
| goto cpu_clear; |
| } |
| |
| /* |
| * Run the TRBE erratum checks, now that we know |
| * this instance is about to be registered. |
| */ |
| trbe_check_errata(cpudata); |
| |
| if (trbe_is_broken(cpudata)) { |
| pr_err("Disabling TRBE on cpu%d due to erratum\n", cpu); |
| goto cpu_clear; |
| } |
| |
| /* |
| * If the TRBE is affected by erratum TRBE_WORKAROUND_OVERWRITE_FILL_MODE, |
| * we must always program the TBRPTR_EL1, 256bytes from a page |
| * boundary, with TRBBASER_EL1 set to the page, to prevent |
| * TRBE over-writing 256bytes at TRBBASER_EL1 on FILL event. |
| * |
| * Thus make sure we always align our write pointer to a PAGE_SIZE, |
| * which also guarantees that we have at least a PAGE_SIZE space in |
| * the buffer (TRBLIMITR is PAGE aligned) and thus we can skip |
| * the required bytes at the base. |
| */ |
| if (trbe_may_overwrite_in_fill_mode(cpudata)) |
| cpudata->trbe_align = PAGE_SIZE; |
| else |
| cpudata->trbe_align = cpudata->trbe_hw_align; |
| |
| cpudata->trbe_flag = get_trbe_flag_update(trbidr); |
| cpudata->cpu = cpu; |
| cpudata->drvdata = drvdata; |
| return; |
| cpu_clear: |
| cpumask_clear_cpu(cpu, &drvdata->supported_cpus); |
| } |
| |
| static void arm_trbe_remove_coresight_cpu(struct trbe_drvdata *drvdata, int cpu) |
| { |
| struct coresight_device *trbe_csdev = coresight_get_percpu_sink(cpu); |
| |
| if (trbe_csdev) { |
| coresight_unregister(trbe_csdev); |
| coresight_set_percpu_sink(cpu, NULL); |
| } |
| } |
| |
| static int arm_trbe_probe_coresight(struct trbe_drvdata *drvdata) |
| { |
| int cpu; |
| |
| drvdata->cpudata = alloc_percpu(typeof(*drvdata->cpudata)); |
| if (!drvdata->cpudata) |
| return -ENOMEM; |
| |
| for_each_cpu(cpu, &drvdata->supported_cpus) { |
| /* If we fail to probe the CPU, let us defer it to hotplug callbacks */ |
| if (smp_call_function_single(cpu, arm_trbe_probe_cpu, drvdata, 1)) |
| continue; |
| if (cpumask_test_cpu(cpu, &drvdata->supported_cpus)) |
| arm_trbe_register_coresight_cpu(drvdata, cpu); |
| if (cpumask_test_cpu(cpu, &drvdata->supported_cpus)) |
| smp_call_function_single(cpu, arm_trbe_enable_cpu, drvdata, 1); |
| } |
| return 0; |
| } |
| |
| static int arm_trbe_remove_coresight(struct trbe_drvdata *drvdata) |
| { |
| int cpu; |
| |
| for_each_cpu(cpu, &drvdata->supported_cpus) { |
| smp_call_function_single(cpu, arm_trbe_disable_cpu, drvdata, 1); |
| arm_trbe_remove_coresight_cpu(drvdata, cpu); |
| } |
| free_percpu(drvdata->cpudata); |
| return 0; |
| } |
| |
| static void arm_trbe_probe_hotplugged_cpu(struct trbe_drvdata *drvdata) |
| { |
| preempt_disable(); |
| arm_trbe_probe_cpu(drvdata); |
| preempt_enable(); |
| } |
| |
| static int arm_trbe_cpu_startup(unsigned int cpu, struct hlist_node *node) |
| { |
| struct trbe_drvdata *drvdata = hlist_entry_safe(node, struct trbe_drvdata, hotplug_node); |
| |
| if (cpumask_test_cpu(cpu, &drvdata->supported_cpus)) { |
| |
| /* |
| * If this CPU was not probed for TRBE, |
| * initialize it now. |
| */ |
| if (!coresight_get_percpu_sink(cpu)) { |
| arm_trbe_probe_hotplugged_cpu(drvdata); |
| if (cpumask_test_cpu(cpu, &drvdata->supported_cpus)) |
| arm_trbe_register_coresight_cpu(drvdata, cpu); |
| if (cpumask_test_cpu(cpu, &drvdata->supported_cpus)) |
| arm_trbe_enable_cpu(drvdata); |
| } else { |
| arm_trbe_enable_cpu(drvdata); |
| } |
| } |
| return 0; |
| } |
| |
| static int arm_trbe_cpu_teardown(unsigned int cpu, struct hlist_node *node) |
| { |
| struct trbe_drvdata *drvdata = hlist_entry_safe(node, struct trbe_drvdata, hotplug_node); |
| |
| if (cpumask_test_cpu(cpu, &drvdata->supported_cpus)) |
| arm_trbe_disable_cpu(drvdata); |
| return 0; |
| } |
| |
| static int arm_trbe_probe_cpuhp(struct trbe_drvdata *drvdata) |
| { |
| enum cpuhp_state trbe_online; |
| int ret; |
| |
| trbe_online = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, DRVNAME, |
| arm_trbe_cpu_startup, arm_trbe_cpu_teardown); |
| if (trbe_online < 0) |
| return trbe_online; |
| |
| ret = cpuhp_state_add_instance(trbe_online, &drvdata->hotplug_node); |
| if (ret) { |
| cpuhp_remove_multi_state(trbe_online); |
| return ret; |
| } |
| drvdata->trbe_online = trbe_online; |
| return 0; |
| } |
| |
| static void arm_trbe_remove_cpuhp(struct trbe_drvdata *drvdata) |
| { |
| cpuhp_state_remove_instance(drvdata->trbe_online, &drvdata->hotplug_node); |
| cpuhp_remove_multi_state(drvdata->trbe_online); |
| } |
| |
| static int arm_trbe_probe_irq(struct platform_device *pdev, |
| struct trbe_drvdata *drvdata) |
| { |
| int ret; |
| |
| drvdata->irq = platform_get_irq(pdev, 0); |
| if (drvdata->irq < 0) { |
| pr_err("IRQ not found for the platform device\n"); |
| return drvdata->irq; |
| } |
| |
| if (!irq_is_percpu(drvdata->irq)) { |
| pr_err("IRQ is not a PPI\n"); |
| return -EINVAL; |
| } |
| |
| if (irq_get_percpu_devid_partition(drvdata->irq, &drvdata->supported_cpus)) |
| return -EINVAL; |
| |
| drvdata->handle = alloc_percpu(struct perf_output_handle *); |
| if (!drvdata->handle) |
| return -ENOMEM; |
| |
| ret = request_percpu_irq(drvdata->irq, arm_trbe_irq_handler, DRVNAME, drvdata->handle); |
| if (ret) { |
| free_percpu(drvdata->handle); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static void arm_trbe_remove_irq(struct trbe_drvdata *drvdata) |
| { |
| free_percpu_irq(drvdata->irq, drvdata->handle); |
| free_percpu(drvdata->handle); |
| } |
| |
| static int arm_trbe_device_probe(struct platform_device *pdev) |
| { |
| struct trbe_drvdata *drvdata; |
| struct device *dev = &pdev->dev; |
| int ret; |
| |
| /* Trace capture is not possible with kernel page table isolation */ |
| if (arm64_kernel_unmapped_at_el0()) { |
| pr_err("TRBE wouldn't work if kernel gets unmapped at EL0\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); |
| if (!drvdata) |
| return -ENOMEM; |
| |
| dev_set_drvdata(dev, drvdata); |
| drvdata->pdev = pdev; |
| ret = arm_trbe_probe_irq(pdev, drvdata); |
| if (ret) |
| return ret; |
| |
| ret = arm_trbe_probe_coresight(drvdata); |
| if (ret) |
| goto probe_failed; |
| |
| ret = arm_trbe_probe_cpuhp(drvdata); |
| if (ret) |
| goto cpuhp_failed; |
| |
| return 0; |
| cpuhp_failed: |
| arm_trbe_remove_coresight(drvdata); |
| probe_failed: |
| arm_trbe_remove_irq(drvdata); |
| return ret; |
| } |
| |
| static void arm_trbe_device_remove(struct platform_device *pdev) |
| { |
| struct trbe_drvdata *drvdata = platform_get_drvdata(pdev); |
| |
| arm_trbe_remove_cpuhp(drvdata); |
| arm_trbe_remove_coresight(drvdata); |
| arm_trbe_remove_irq(drvdata); |
| } |
| |
| static const struct of_device_id arm_trbe_of_match[] = { |
| { .compatible = "arm,trace-buffer-extension"}, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, arm_trbe_of_match); |
| |
| #ifdef CONFIG_ACPI |
| static const struct platform_device_id arm_trbe_acpi_match[] = { |
| { ARMV8_TRBE_PDEV_NAME, 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(platform, arm_trbe_acpi_match); |
| #endif |
| |
| static struct platform_driver arm_trbe_driver = { |
| .id_table = ACPI_PTR(arm_trbe_acpi_match), |
| .driver = { |
| .name = DRVNAME, |
| .of_match_table = of_match_ptr(arm_trbe_of_match), |
| .suppress_bind_attrs = true, |
| }, |
| .probe = arm_trbe_device_probe, |
| .remove_new = arm_trbe_device_remove, |
| }; |
| |
| static int __init arm_trbe_init(void) |
| { |
| int ret; |
| |
| ret = platform_driver_register(&arm_trbe_driver); |
| if (!ret) |
| return 0; |
| |
| pr_err("Error registering %s platform driver\n", DRVNAME); |
| return ret; |
| } |
| |
| static void __exit arm_trbe_exit(void) |
| { |
| platform_driver_unregister(&arm_trbe_driver); |
| } |
| module_init(arm_trbe_init); |
| module_exit(arm_trbe_exit); |
| |
| MODULE_AUTHOR("Anshuman Khandual <anshuman.khandual@arm.com>"); |
| MODULE_DESCRIPTION("Arm Trace Buffer Extension (TRBE) driver"); |
| MODULE_LICENSE("GPL v2"); |