| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (c) 2000 Justin Cormack |
| */ |
| |
| /* |
| * Newton keyboard driver for Linux |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/input.h> |
| #include <linux/serio.h> |
| |
| #define DRIVER_DESC "Newton keyboard driver" |
| |
| MODULE_AUTHOR("Justin Cormack <j.cormack@doc.ic.ac.uk>"); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| |
| #define NKBD_KEY 0x7f |
| #define NKBD_PRESS 0x80 |
| |
| static unsigned char nkbd_keycode[128] = { |
| KEY_A, KEY_S, KEY_D, KEY_F, KEY_H, KEY_G, KEY_Z, KEY_X, |
| KEY_C, KEY_V, 0, KEY_B, KEY_Q, KEY_W, KEY_E, KEY_R, |
| KEY_Y, KEY_T, KEY_1, KEY_2, KEY_3, KEY_4, KEY_6, KEY_5, |
| KEY_EQUAL, KEY_9, KEY_7, KEY_MINUS, KEY_8, KEY_0, KEY_RIGHTBRACE, KEY_O, |
| KEY_U, KEY_LEFTBRACE, KEY_I, KEY_P, KEY_ENTER, KEY_L, KEY_J, KEY_APOSTROPHE, |
| KEY_K, KEY_SEMICOLON, KEY_BACKSLASH, KEY_COMMA, KEY_SLASH, KEY_N, KEY_M, KEY_DOT, |
| KEY_TAB, KEY_SPACE, KEY_GRAVE, KEY_DELETE, 0, 0, 0, KEY_LEFTMETA, |
| KEY_LEFTSHIFT, KEY_CAPSLOCK, KEY_LEFTALT, KEY_LEFTCTRL, KEY_RIGHTSHIFT, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| KEY_LEFT, KEY_RIGHT, KEY_DOWN, KEY_UP, 0 |
| }; |
| |
| struct nkbd { |
| unsigned char keycode[128]; |
| struct input_dev *dev; |
| struct serio *serio; |
| char phys[32]; |
| }; |
| |
| static irqreturn_t nkbd_interrupt(struct serio *serio, |
| unsigned char data, unsigned int flags) |
| { |
| struct nkbd *nkbd = serio_get_drvdata(serio); |
| |
| /* invalid scan codes are probably the init sequence, so we ignore them */ |
| if (nkbd->keycode[data & NKBD_KEY]) { |
| input_report_key(nkbd->dev, nkbd->keycode[data & NKBD_KEY], data & NKBD_PRESS); |
| input_sync(nkbd->dev); |
| } |
| |
| else if (data == 0xe7) /* end of init sequence */ |
| printk(KERN_INFO "input: %s on %s\n", nkbd->dev->name, serio->phys); |
| return IRQ_HANDLED; |
| |
| } |
| |
| static int nkbd_connect(struct serio *serio, struct serio_driver *drv) |
| { |
| struct nkbd *nkbd; |
| struct input_dev *input_dev; |
| int err = -ENOMEM; |
| int i; |
| |
| nkbd = kzalloc(sizeof(*nkbd), GFP_KERNEL); |
| input_dev = input_allocate_device(); |
| if (!nkbd || !input_dev) |
| goto fail1; |
| |
| nkbd->serio = serio; |
| nkbd->dev = input_dev; |
| snprintf(nkbd->phys, sizeof(nkbd->phys), "%s/input0", serio->phys); |
| memcpy(nkbd->keycode, nkbd_keycode, sizeof(nkbd->keycode)); |
| |
| input_dev->name = "Newton Keyboard"; |
| input_dev->phys = nkbd->phys; |
| input_dev->id.bustype = BUS_RS232; |
| input_dev->id.vendor = SERIO_NEWTON; |
| input_dev->id.product = 0x0001; |
| input_dev->id.version = 0x0100; |
| input_dev->dev.parent = &serio->dev; |
| |
| input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); |
| input_dev->keycode = nkbd->keycode; |
| input_dev->keycodesize = sizeof(unsigned char); |
| input_dev->keycodemax = ARRAY_SIZE(nkbd_keycode); |
| for (i = 0; i < 128; i++) |
| set_bit(nkbd->keycode[i], input_dev->keybit); |
| clear_bit(0, input_dev->keybit); |
| |
| serio_set_drvdata(serio, nkbd); |
| |
| err = serio_open(serio, drv); |
| if (err) |
| goto fail2; |
| |
| err = input_register_device(nkbd->dev); |
| if (err) |
| goto fail3; |
| |
| return 0; |
| |
| fail3: serio_close(serio); |
| fail2: serio_set_drvdata(serio, NULL); |
| fail1: input_free_device(input_dev); |
| kfree(nkbd); |
| return err; |
| } |
| |
| static void nkbd_disconnect(struct serio *serio) |
| { |
| struct nkbd *nkbd = serio_get_drvdata(serio); |
| |
| serio_close(serio); |
| serio_set_drvdata(serio, NULL); |
| input_unregister_device(nkbd->dev); |
| kfree(nkbd); |
| } |
| |
| static const struct serio_device_id nkbd_serio_ids[] = { |
| { |
| .type = SERIO_RS232, |
| .proto = SERIO_NEWTON, |
| .id = SERIO_ANY, |
| .extra = SERIO_ANY, |
| }, |
| { 0 } |
| }; |
| |
| MODULE_DEVICE_TABLE(serio, nkbd_serio_ids); |
| |
| static struct serio_driver nkbd_drv = { |
| .driver = { |
| .name = "newtonkbd", |
| }, |
| .description = DRIVER_DESC, |
| .id_table = nkbd_serio_ids, |
| .interrupt = nkbd_interrupt, |
| .connect = nkbd_connect, |
| .disconnect = nkbd_disconnect, |
| }; |
| |
| module_serio_driver(nkbd_drv); |