| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Keyboard class input driver for the NVIDIA Tegra SoC internal matrix |
| * keyboard controller |
| * |
| * Copyright (c) 2009-2011, NVIDIA Corporation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/input.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/interrupt.h> |
| #include <linux/of.h> |
| #include <linux/property.h> |
| #include <linux/clk.h> |
| #include <linux/slab.h> |
| #include <linux/input/matrix_keypad.h> |
| #include <linux/reset.h> |
| #include <linux/err.h> |
| |
| #define KBC_MAX_KPENT 8 |
| |
| /* Maximum row/column supported by Tegra KBC yet is 16x8 */ |
| #define KBC_MAX_GPIO 24 |
| /* Maximum keys supported by Tegra KBC yet is 16 x 8*/ |
| #define KBC_MAX_KEY (16 * 8) |
| |
| #define KBC_MAX_DEBOUNCE_CNT 0x3ffu |
| |
| /* KBC row scan time and delay for beginning the row scan. */ |
| #define KBC_ROW_SCAN_TIME 16 |
| #define KBC_ROW_SCAN_DLY 5 |
| |
| /* KBC uses a 32KHz clock so a cycle = 1/32Khz */ |
| #define KBC_CYCLE_MS 32 |
| |
| /* KBC Registers */ |
| |
| /* KBC Control Register */ |
| #define KBC_CONTROL_0 0x0 |
| #define KBC_FIFO_TH_CNT_SHIFT(cnt) (cnt << 14) |
| #define KBC_DEBOUNCE_CNT_SHIFT(cnt) (cnt << 4) |
| #define KBC_CONTROL_FIFO_CNT_INT_EN (1 << 3) |
| #define KBC_CONTROL_KEYPRESS_INT_EN (1 << 1) |
| #define KBC_CONTROL_KBC_EN (1 << 0) |
| |
| /* KBC Interrupt Register */ |
| #define KBC_INT_0 0x4 |
| #define KBC_INT_FIFO_CNT_INT_STATUS (1 << 2) |
| #define KBC_INT_KEYPRESS_INT_STATUS (1 << 0) |
| |
| #define KBC_ROW_CFG0_0 0x8 |
| #define KBC_COL_CFG0_0 0x18 |
| #define KBC_TO_CNT_0 0x24 |
| #define KBC_INIT_DLY_0 0x28 |
| #define KBC_RPT_DLY_0 0x2c |
| #define KBC_KP_ENT0_0 0x30 |
| #define KBC_KP_ENT1_0 0x34 |
| #define KBC_ROW0_MASK_0 0x38 |
| |
| #define KBC_ROW_SHIFT 3 |
| |
| enum tegra_pin_type { |
| PIN_CFG_IGNORE, |
| PIN_CFG_COL, |
| PIN_CFG_ROW, |
| }; |
| |
| /* Tegra KBC hw support */ |
| struct tegra_kbc_hw_support { |
| int max_rows; |
| int max_columns; |
| }; |
| |
| struct tegra_kbc_pin_cfg { |
| enum tegra_pin_type type; |
| unsigned char num; |
| }; |
| |
| struct tegra_kbc { |
| struct device *dev; |
| unsigned int debounce_cnt; |
| unsigned int repeat_cnt; |
| struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO]; |
| const struct matrix_keymap_data *keymap_data; |
| bool wakeup; |
| void __iomem *mmio; |
| struct input_dev *idev; |
| int irq; |
| spinlock_t lock; |
| unsigned int repoll_dly; |
| unsigned long cp_dly_jiffies; |
| unsigned int cp_to_wkup_dly; |
| bool use_fn_map; |
| bool use_ghost_filter; |
| bool keypress_caused_wake; |
| unsigned short keycode[KBC_MAX_KEY * 2]; |
| unsigned short current_keys[KBC_MAX_KPENT]; |
| unsigned int num_pressed_keys; |
| u32 wakeup_key; |
| struct timer_list timer; |
| struct clk *clk; |
| struct reset_control *rst; |
| const struct tegra_kbc_hw_support *hw_support; |
| int max_keys; |
| int num_rows_and_columns; |
| }; |
| |
| static void tegra_kbc_report_released_keys(struct input_dev *input, |
| unsigned short old_keycodes[], |
| unsigned int old_num_keys, |
| unsigned short new_keycodes[], |
| unsigned int new_num_keys) |
| { |
| unsigned int i, j; |
| |
| for (i = 0; i < old_num_keys; i++) { |
| for (j = 0; j < new_num_keys; j++) |
| if (old_keycodes[i] == new_keycodes[j]) |
| break; |
| |
| if (j == new_num_keys) |
| input_report_key(input, old_keycodes[i], 0); |
| } |
| } |
| |
| static void tegra_kbc_report_pressed_keys(struct input_dev *input, |
| unsigned char scancodes[], |
| unsigned short keycodes[], |
| unsigned int num_pressed_keys) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < num_pressed_keys; i++) { |
| input_event(input, EV_MSC, MSC_SCAN, scancodes[i]); |
| input_report_key(input, keycodes[i], 1); |
| } |
| } |
| |
| static void tegra_kbc_report_keys(struct tegra_kbc *kbc) |
| { |
| unsigned char scancodes[KBC_MAX_KPENT]; |
| unsigned short keycodes[KBC_MAX_KPENT]; |
| u32 val = 0; |
| unsigned int i; |
| unsigned int num_down = 0; |
| bool fn_keypress = false; |
| bool key_in_same_row = false; |
| bool key_in_same_col = false; |
| |
| for (i = 0; i < KBC_MAX_KPENT; i++) { |
| if ((i % 4) == 0) |
| val = readl(kbc->mmio + KBC_KP_ENT0_0 + i); |
| |
| if (val & 0x80) { |
| unsigned int col = val & 0x07; |
| unsigned int row = (val >> 3) & 0x0f; |
| unsigned char scancode = |
| MATRIX_SCAN_CODE(row, col, KBC_ROW_SHIFT); |
| |
| scancodes[num_down] = scancode; |
| keycodes[num_down] = kbc->keycode[scancode]; |
| /* If driver uses Fn map, do not report the Fn key. */ |
| if ((keycodes[num_down] == KEY_FN) && kbc->use_fn_map) |
| fn_keypress = true; |
| else |
| num_down++; |
| } |
| |
| val >>= 8; |
| } |
| |
| /* |
| * Matrix keyboard designs are prone to keyboard ghosting. |
| * Ghosting occurs if there are 3 keys such that - |
| * any 2 of the 3 keys share a row, and any 2 of them share a column. |
| * If so ignore the key presses for this iteration. |
| */ |
| if (kbc->use_ghost_filter && num_down >= 3) { |
| for (i = 0; i < num_down; i++) { |
| unsigned int j; |
| u8 curr_col = scancodes[i] & 0x07; |
| u8 curr_row = scancodes[i] >> KBC_ROW_SHIFT; |
| |
| /* |
| * Find 2 keys such that one key is in the same row |
| * and the other is in the same column as the i-th key. |
| */ |
| for (j = i + 1; j < num_down; j++) { |
| u8 col = scancodes[j] & 0x07; |
| u8 row = scancodes[j] >> KBC_ROW_SHIFT; |
| |
| if (col == curr_col) |
| key_in_same_col = true; |
| if (row == curr_row) |
| key_in_same_row = true; |
| } |
| } |
| } |
| |
| /* |
| * If the platform uses Fn keymaps, translate keys on a Fn keypress. |
| * Function keycodes are max_keys apart from the plain keycodes. |
| */ |
| if (fn_keypress) { |
| for (i = 0; i < num_down; i++) { |
| scancodes[i] += kbc->max_keys; |
| keycodes[i] = kbc->keycode[scancodes[i]]; |
| } |
| } |
| |
| /* Ignore the key presses for this iteration? */ |
| if (key_in_same_col && key_in_same_row) |
| return; |
| |
| tegra_kbc_report_released_keys(kbc->idev, |
| kbc->current_keys, kbc->num_pressed_keys, |
| keycodes, num_down); |
| tegra_kbc_report_pressed_keys(kbc->idev, scancodes, keycodes, num_down); |
| input_sync(kbc->idev); |
| |
| memcpy(kbc->current_keys, keycodes, sizeof(kbc->current_keys)); |
| kbc->num_pressed_keys = num_down; |
| } |
| |
| static void tegra_kbc_set_fifo_interrupt(struct tegra_kbc *kbc, bool enable) |
| { |
| u32 val; |
| |
| val = readl(kbc->mmio + KBC_CONTROL_0); |
| if (enable) |
| val |= KBC_CONTROL_FIFO_CNT_INT_EN; |
| else |
| val &= ~KBC_CONTROL_FIFO_CNT_INT_EN; |
| writel(val, kbc->mmio + KBC_CONTROL_0); |
| } |
| |
| static void tegra_kbc_keypress_timer(struct timer_list *t) |
| { |
| struct tegra_kbc *kbc = from_timer(kbc, t, timer); |
| u32 val; |
| unsigned int i; |
| |
| guard(spinlock_irqsave)(&kbc->lock); |
| |
| val = (readl(kbc->mmio + KBC_INT_0) >> 4) & 0xf; |
| if (val) { |
| unsigned long dly; |
| |
| tegra_kbc_report_keys(kbc); |
| |
| /* |
| * If more than one keys are pressed we need not wait |
| * for the repoll delay. |
| */ |
| dly = (val == 1) ? kbc->repoll_dly : 1; |
| mod_timer(&kbc->timer, jiffies + msecs_to_jiffies(dly)); |
| } else { |
| /* Release any pressed keys and exit the polling loop */ |
| for (i = 0; i < kbc->num_pressed_keys; i++) |
| input_report_key(kbc->idev, kbc->current_keys[i], 0); |
| input_sync(kbc->idev); |
| |
| kbc->num_pressed_keys = 0; |
| |
| /* All keys are released so enable the keypress interrupt */ |
| tegra_kbc_set_fifo_interrupt(kbc, true); |
| } |
| } |
| |
| static irqreturn_t tegra_kbc_isr(int irq, void *args) |
| { |
| struct tegra_kbc *kbc = args; |
| u32 val; |
| |
| guard(spinlock_irqsave)(&kbc->lock); |
| |
| /* |
| * Quickly bail out & reenable interrupts if the fifo threshold |
| * count interrupt wasn't the interrupt source |
| */ |
| val = readl(kbc->mmio + KBC_INT_0); |
| writel(val, kbc->mmio + KBC_INT_0); |
| |
| if (val & KBC_INT_FIFO_CNT_INT_STATUS) { |
| /* |
| * Until all keys are released, defer further processing to |
| * the polling loop in tegra_kbc_keypress_timer. |
| */ |
| tegra_kbc_set_fifo_interrupt(kbc, false); |
| mod_timer(&kbc->timer, jiffies + kbc->cp_dly_jiffies); |
| } else if (val & KBC_INT_KEYPRESS_INT_STATUS) { |
| /* We can be here only through system resume path */ |
| kbc->keypress_caused_wake = true; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void tegra_kbc_setup_wakekeys(struct tegra_kbc *kbc, bool filter) |
| { |
| int i; |
| unsigned int rst_val; |
| |
| /* Either mask all keys or none. */ |
| rst_val = (filter && !kbc->wakeup) ? ~0 : 0; |
| |
| for (i = 0; i < kbc->hw_support->max_rows; i++) |
| writel(rst_val, kbc->mmio + KBC_ROW0_MASK_0 + i * 4); |
| } |
| |
| static void tegra_kbc_config_pins(struct tegra_kbc *kbc) |
| { |
| int i; |
| |
| for (i = 0; i < KBC_MAX_GPIO; i++) { |
| u32 r_shft = 5 * (i % 6); |
| u32 c_shft = 4 * (i % 8); |
| u32 r_mask = 0x1f << r_shft; |
| u32 c_mask = 0x0f << c_shft; |
| u32 r_offs = (i / 6) * 4 + KBC_ROW_CFG0_0; |
| u32 c_offs = (i / 8) * 4 + KBC_COL_CFG0_0; |
| u32 row_cfg = readl(kbc->mmio + r_offs); |
| u32 col_cfg = readl(kbc->mmio + c_offs); |
| |
| row_cfg &= ~r_mask; |
| col_cfg &= ~c_mask; |
| |
| switch (kbc->pin_cfg[i].type) { |
| case PIN_CFG_ROW: |
| row_cfg |= ((kbc->pin_cfg[i].num << 1) | 1) << r_shft; |
| break; |
| |
| case PIN_CFG_COL: |
| col_cfg |= ((kbc->pin_cfg[i].num << 1) | 1) << c_shft; |
| break; |
| |
| case PIN_CFG_IGNORE: |
| break; |
| } |
| |
| writel(row_cfg, kbc->mmio + r_offs); |
| writel(col_cfg, kbc->mmio + c_offs); |
| } |
| } |
| |
| static int tegra_kbc_start(struct tegra_kbc *kbc) |
| { |
| unsigned int debounce_cnt; |
| u32 val = 0; |
| int ret; |
| |
| ret = clk_prepare_enable(kbc->clk); |
| if (ret) |
| return ret; |
| |
| /* Reset the KBC controller to clear all previous status.*/ |
| reset_control_assert(kbc->rst); |
| udelay(100); |
| reset_control_deassert(kbc->rst); |
| udelay(100); |
| |
| tegra_kbc_config_pins(kbc); |
| tegra_kbc_setup_wakekeys(kbc, false); |
| |
| writel(kbc->repeat_cnt, kbc->mmio + KBC_RPT_DLY_0); |
| |
| /* Keyboard debounce count is maximum of 12 bits. */ |
| debounce_cnt = min(kbc->debounce_cnt, KBC_MAX_DEBOUNCE_CNT); |
| val = KBC_DEBOUNCE_CNT_SHIFT(debounce_cnt); |
| val |= KBC_FIFO_TH_CNT_SHIFT(1); /* set fifo interrupt threshold to 1 */ |
| val |= KBC_CONTROL_FIFO_CNT_INT_EN; /* interrupt on FIFO threshold */ |
| val |= KBC_CONTROL_KBC_EN; /* enable */ |
| writel(val, kbc->mmio + KBC_CONTROL_0); |
| |
| /* |
| * Compute the delay(ns) from interrupt mode to continuous polling |
| * mode so the timer routine is scheduled appropriately. |
| */ |
| val = readl(kbc->mmio + KBC_INIT_DLY_0); |
| kbc->cp_dly_jiffies = usecs_to_jiffies((val & 0xfffff) * 32); |
| |
| kbc->num_pressed_keys = 0; |
| |
| /* |
| * Atomically clear out any remaining entries in the key FIFO |
| * and enable keyboard interrupts. |
| */ |
| while (1) { |
| val = readl(kbc->mmio + KBC_INT_0); |
| val >>= 4; |
| if (!val) |
| break; |
| |
| val = readl(kbc->mmio + KBC_KP_ENT0_0); |
| val = readl(kbc->mmio + KBC_KP_ENT1_0); |
| } |
| writel(0x7, kbc->mmio + KBC_INT_0); |
| |
| enable_irq(kbc->irq); |
| |
| return 0; |
| } |
| |
| static void tegra_kbc_stop(struct tegra_kbc *kbc) |
| { |
| u32 val; |
| |
| scoped_guard(spinlock_irqsave, &kbc->lock) { |
| val = readl(kbc->mmio + KBC_CONTROL_0); |
| val &= ~1; |
| writel(val, kbc->mmio + KBC_CONTROL_0); |
| } |
| |
| disable_irq(kbc->irq); |
| del_timer_sync(&kbc->timer); |
| |
| clk_disable_unprepare(kbc->clk); |
| } |
| |
| static int tegra_kbc_open(struct input_dev *dev) |
| { |
| struct tegra_kbc *kbc = input_get_drvdata(dev); |
| |
| return tegra_kbc_start(kbc); |
| } |
| |
| static void tegra_kbc_close(struct input_dev *dev) |
| { |
| struct tegra_kbc *kbc = input_get_drvdata(dev); |
| |
| return tegra_kbc_stop(kbc); |
| } |
| |
| static bool tegra_kbc_check_pin_cfg(const struct tegra_kbc *kbc, |
| unsigned int *num_rows) |
| { |
| int i; |
| |
| *num_rows = 0; |
| |
| for (i = 0; i < KBC_MAX_GPIO; i++) { |
| const struct tegra_kbc_pin_cfg *pin_cfg = &kbc->pin_cfg[i]; |
| |
| switch (pin_cfg->type) { |
| case PIN_CFG_ROW: |
| if (pin_cfg->num >= kbc->hw_support->max_rows) { |
| dev_err(kbc->dev, |
| "pin_cfg[%d]: invalid row number %d\n", |
| i, pin_cfg->num); |
| return false; |
| } |
| (*num_rows)++; |
| break; |
| |
| case PIN_CFG_COL: |
| if (pin_cfg->num >= kbc->hw_support->max_columns) { |
| dev_err(kbc->dev, |
| "pin_cfg[%d]: invalid column number %d\n", |
| i, pin_cfg->num); |
| return false; |
| } |
| break; |
| |
| case PIN_CFG_IGNORE: |
| break; |
| |
| default: |
| dev_err(kbc->dev, |
| "pin_cfg[%d]: invalid entry type %d\n", |
| pin_cfg->type, pin_cfg->num); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| static int tegra_kbc_parse_dt(struct tegra_kbc *kbc) |
| { |
| struct device_node *np = kbc->dev->of_node; |
| u32 prop; |
| int i; |
| int num_rows; |
| int num_cols; |
| u32 cols_cfg[KBC_MAX_GPIO]; |
| u32 rows_cfg[KBC_MAX_GPIO]; |
| |
| if (!of_property_read_u32(np, "nvidia,debounce-delay-ms", &prop)) |
| kbc->debounce_cnt = prop; |
| |
| if (!of_property_read_u32(np, "nvidia,repeat-delay-ms", &prop)) |
| kbc->repeat_cnt = prop; |
| |
| kbc->use_ghost_filter = of_property_present(np, "nvidia,needs-ghost-filter"); |
| |
| if (of_property_read_bool(np, "wakeup-source") || |
| of_property_read_bool(np, "nvidia,wakeup-source")) /* legacy */ |
| kbc->wakeup = true; |
| |
| if (!of_property_present(np, "linux,keymap")) { |
| dev_err(kbc->dev, "property linux,keymap not found\n"); |
| return -ENOENT; |
| } |
| |
| /* Set all pins as non-configured */ |
| for (i = 0; i < kbc->num_rows_and_columns; i++) |
| kbc->pin_cfg[i].type = PIN_CFG_IGNORE; |
| |
| num_rows = of_property_read_variable_u32_array(np, "nvidia,kbc-row-pins", |
| rows_cfg, 1, KBC_MAX_GPIO); |
| if (num_rows < 0) { |
| dev_err(kbc->dev, "Rows configurations are not proper\n"); |
| return num_rows; |
| } else if (num_rows > kbc->hw_support->max_rows) { |
| dev_err(kbc->dev, |
| "Number of rows is more than supported by hardware\n"); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < num_rows; i++) { |
| kbc->pin_cfg[rows_cfg[i]].type = PIN_CFG_ROW; |
| kbc->pin_cfg[rows_cfg[i]].num = i; |
| } |
| |
| num_cols = of_property_read_variable_u32_array(np, "nvidia,kbc-col-pins", |
| cols_cfg, 1, KBC_MAX_GPIO); |
| if (num_cols < 0) { |
| dev_err(kbc->dev, "Cols configurations are not proper\n"); |
| return num_cols; |
| } else if (num_cols > kbc->hw_support->max_columns) { |
| dev_err(kbc->dev, |
| "Number of cols is more than supported by hardware\n"); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < num_cols; i++) { |
| kbc->pin_cfg[cols_cfg[i]].type = PIN_CFG_COL; |
| kbc->pin_cfg[cols_cfg[i]].num = i; |
| } |
| |
| if (!num_rows || !num_cols || ((num_rows + num_cols) > KBC_MAX_GPIO)) { |
| dev_err(kbc->dev, |
| "keypad rows/columns not properly specified\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const struct tegra_kbc_hw_support tegra20_kbc_hw_support = { |
| .max_rows = 16, |
| .max_columns = 8, |
| }; |
| |
| static const struct tegra_kbc_hw_support tegra11_kbc_hw_support = { |
| .max_rows = 11, |
| .max_columns = 8, |
| }; |
| |
| static const struct of_device_id tegra_kbc_of_match[] = { |
| { .compatible = "nvidia,tegra114-kbc", .data = &tegra11_kbc_hw_support}, |
| { .compatible = "nvidia,tegra30-kbc", .data = &tegra20_kbc_hw_support}, |
| { .compatible = "nvidia,tegra20-kbc", .data = &tegra20_kbc_hw_support}, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, tegra_kbc_of_match); |
| |
| static int tegra_kbc_probe(struct platform_device *pdev) |
| { |
| struct tegra_kbc *kbc; |
| int err; |
| int num_rows = 0; |
| unsigned int debounce_cnt; |
| unsigned int scan_time_rows; |
| unsigned int keymap_rows; |
| |
| kbc = devm_kzalloc(&pdev->dev, sizeof(*kbc), GFP_KERNEL); |
| if (!kbc) { |
| dev_err(&pdev->dev, "failed to alloc memory for kbc\n"); |
| return -ENOMEM; |
| } |
| |
| kbc->dev = &pdev->dev; |
| kbc->hw_support = device_get_match_data(&pdev->dev); |
| kbc->max_keys = kbc->hw_support->max_rows * |
| kbc->hw_support->max_columns; |
| kbc->num_rows_and_columns = kbc->hw_support->max_rows + |
| kbc->hw_support->max_columns; |
| keymap_rows = kbc->max_keys; |
| spin_lock_init(&kbc->lock); |
| |
| err = tegra_kbc_parse_dt(kbc); |
| if (err) |
| return err; |
| |
| if (!tegra_kbc_check_pin_cfg(kbc, &num_rows)) |
| return -EINVAL; |
| |
| kbc->irq = platform_get_irq(pdev, 0); |
| if (kbc->irq < 0) |
| return -ENXIO; |
| |
| kbc->idev = devm_input_allocate_device(&pdev->dev); |
| if (!kbc->idev) { |
| dev_err(&pdev->dev, "failed to allocate input device\n"); |
| return -ENOMEM; |
| } |
| |
| timer_setup(&kbc->timer, tegra_kbc_keypress_timer, 0); |
| |
| kbc->mmio = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(kbc->mmio)) |
| return PTR_ERR(kbc->mmio); |
| |
| kbc->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(kbc->clk)) { |
| dev_err(&pdev->dev, "failed to get keyboard clock\n"); |
| return PTR_ERR(kbc->clk); |
| } |
| |
| kbc->rst = devm_reset_control_get(&pdev->dev, "kbc"); |
| if (IS_ERR(kbc->rst)) { |
| dev_err(&pdev->dev, "failed to get keyboard reset\n"); |
| return PTR_ERR(kbc->rst); |
| } |
| |
| /* |
| * The time delay between two consecutive reads of the FIFO is |
| * the sum of the repeat time and the time taken for scanning |
| * the rows. There is an additional delay before the row scanning |
| * starts. The repoll delay is computed in milliseconds. |
| */ |
| debounce_cnt = min(kbc->debounce_cnt, KBC_MAX_DEBOUNCE_CNT); |
| scan_time_rows = (KBC_ROW_SCAN_TIME + debounce_cnt) * num_rows; |
| kbc->repoll_dly = KBC_ROW_SCAN_DLY + scan_time_rows + kbc->repeat_cnt; |
| kbc->repoll_dly = DIV_ROUND_UP(kbc->repoll_dly, KBC_CYCLE_MS); |
| |
| kbc->idev->name = pdev->name; |
| kbc->idev->id.bustype = BUS_HOST; |
| kbc->idev->dev.parent = &pdev->dev; |
| kbc->idev->open = tegra_kbc_open; |
| kbc->idev->close = tegra_kbc_close; |
| |
| if (kbc->keymap_data && kbc->use_fn_map) |
| keymap_rows *= 2; |
| |
| err = matrix_keypad_build_keymap(kbc->keymap_data, NULL, |
| keymap_rows, |
| kbc->hw_support->max_columns, |
| kbc->keycode, kbc->idev); |
| if (err) { |
| dev_err(&pdev->dev, "failed to setup keymap\n"); |
| return err; |
| } |
| |
| __set_bit(EV_REP, kbc->idev->evbit); |
| input_set_capability(kbc->idev, EV_MSC, MSC_SCAN); |
| |
| input_set_drvdata(kbc->idev, kbc); |
| |
| err = devm_request_irq(&pdev->dev, kbc->irq, tegra_kbc_isr, |
| IRQF_TRIGGER_HIGH | IRQF_NO_AUTOEN, |
| pdev->name, kbc); |
| if (err) { |
| dev_err(&pdev->dev, "failed to request keyboard IRQ\n"); |
| return err; |
| } |
| |
| err = input_register_device(kbc->idev); |
| if (err) { |
| dev_err(&pdev->dev, "failed to register input device\n"); |
| return err; |
| } |
| |
| platform_set_drvdata(pdev, kbc); |
| device_init_wakeup(&pdev->dev, kbc->wakeup); |
| |
| return 0; |
| } |
| |
| static void tegra_kbc_set_keypress_interrupt(struct tegra_kbc *kbc, bool enable) |
| { |
| u32 val; |
| |
| val = readl(kbc->mmio + KBC_CONTROL_0); |
| if (enable) |
| val |= KBC_CONTROL_KEYPRESS_INT_EN; |
| else |
| val &= ~KBC_CONTROL_KEYPRESS_INT_EN; |
| writel(val, kbc->mmio + KBC_CONTROL_0); |
| } |
| |
| static int tegra_kbc_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct tegra_kbc *kbc = platform_get_drvdata(pdev); |
| |
| guard(mutex)(&kbc->idev->mutex); |
| |
| if (device_may_wakeup(&pdev->dev)) { |
| disable_irq(kbc->irq); |
| del_timer_sync(&kbc->timer); |
| tegra_kbc_set_fifo_interrupt(kbc, false); |
| |
| /* Forcefully clear the interrupt status */ |
| writel(0x7, kbc->mmio + KBC_INT_0); |
| /* |
| * Store the previous resident time of continuous polling mode. |
| * Force the keyboard into interrupt mode. |
| */ |
| kbc->cp_to_wkup_dly = readl(kbc->mmio + KBC_TO_CNT_0); |
| writel(0, kbc->mmio + KBC_TO_CNT_0); |
| |
| tegra_kbc_setup_wakekeys(kbc, true); |
| msleep(30); |
| |
| kbc->keypress_caused_wake = false; |
| /* Enable keypress interrupt before going into suspend. */ |
| tegra_kbc_set_keypress_interrupt(kbc, true); |
| enable_irq(kbc->irq); |
| enable_irq_wake(kbc->irq); |
| } else if (input_device_enabled(kbc->idev)) { |
| tegra_kbc_stop(kbc); |
| } |
| |
| return 0; |
| } |
| |
| static int tegra_kbc_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct tegra_kbc *kbc = platform_get_drvdata(pdev); |
| int err; |
| |
| guard(mutex)(&kbc->idev->mutex); |
| |
| if (device_may_wakeup(&pdev->dev)) { |
| disable_irq_wake(kbc->irq); |
| tegra_kbc_setup_wakekeys(kbc, false); |
| /* We will use fifo interrupts for key detection. */ |
| tegra_kbc_set_keypress_interrupt(kbc, false); |
| |
| /* Restore the resident time of continuous polling mode. */ |
| writel(kbc->cp_to_wkup_dly, kbc->mmio + KBC_TO_CNT_0); |
| |
| tegra_kbc_set_fifo_interrupt(kbc, true); |
| |
| if (kbc->keypress_caused_wake && kbc->wakeup_key) { |
| /* |
| * We can't report events directly from the ISR |
| * because timekeeping is stopped when processing |
| * wakeup request and we get a nasty warning when |
| * we try to call do_gettimeofday() in evdev |
| * handler. |
| */ |
| input_report_key(kbc->idev, kbc->wakeup_key, 1); |
| input_sync(kbc->idev); |
| input_report_key(kbc->idev, kbc->wakeup_key, 0); |
| input_sync(kbc->idev); |
| } |
| } else if (input_device_enabled(kbc->idev)) { |
| err = tegra_kbc_start(kbc); |
| if (err) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(tegra_kbc_pm_ops, |
| tegra_kbc_suspend, tegra_kbc_resume); |
| |
| static struct platform_driver tegra_kbc_driver = { |
| .probe = tegra_kbc_probe, |
| .driver = { |
| .name = "tegra-kbc", |
| .pm = pm_sleep_ptr(&tegra_kbc_pm_ops), |
| .of_match_table = tegra_kbc_of_match, |
| }, |
| }; |
| module_platform_driver(tegra_kbc_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Rakesh Iyer <riyer@nvidia.com>"); |
| MODULE_DESCRIPTION("Tegra matrix keyboard controller driver"); |
| MODULE_ALIAS("platform:tegra-kbc"); |