| /* |
| * drivers/leds/leds-apu.c |
| * Copyright (C) 2017 Alan Mizrahi, alan at mizrahi dot com dot ve |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the names of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/dmi.h> |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/leds.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| |
| #define APU1_FCH_ACPI_MMIO_BASE 0xFED80000 |
| #define APU1_FCH_GPIO_BASE (APU1_FCH_ACPI_MMIO_BASE + 0x01BD) |
| #define APU1_LEDON 0x08 |
| #define APU1_LEDOFF 0xC8 |
| #define APU1_NUM_GPIO 3 |
| #define APU1_IOSIZE sizeof(u8) |
| |
| /* LED access parameters */ |
| struct apu_param { |
| void __iomem *addr; /* for ioread/iowrite */ |
| }; |
| |
| /* LED private data */ |
| struct apu_led_priv { |
| struct led_classdev cdev; |
| struct apu_param param; |
| }; |
| #define cdev_to_priv(c) container_of(c, struct apu_led_priv, cdev) |
| |
| /* LED profile */ |
| struct apu_led_profile { |
| const char *name; |
| enum led_brightness brightness; |
| unsigned long offset; /* for devm_ioremap */ |
| }; |
| |
| struct apu_led_pdata { |
| struct platform_device *pdev; |
| struct apu_led_priv *pled; |
| spinlock_t lock; |
| }; |
| |
| static struct apu_led_pdata *apu_led; |
| |
| static const struct apu_led_profile apu1_led_profile[] = { |
| { "apu:green:1", LED_ON, APU1_FCH_GPIO_BASE + 0 * APU1_IOSIZE }, |
| { "apu:green:2", LED_OFF, APU1_FCH_GPIO_BASE + 1 * APU1_IOSIZE }, |
| { "apu:green:3", LED_OFF, APU1_FCH_GPIO_BASE + 2 * APU1_IOSIZE }, |
| }; |
| |
| static const struct dmi_system_id apu_led_dmi_table[] __initconst = { |
| /* PC Engines APU with factory bios "SageBios_PCEngines_APU-45" */ |
| { |
| .ident = "apu", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "APU") |
| } |
| }, |
| /* PC Engines APU with "Mainline" bios >= 4.6.8 */ |
| { |
| .ident = "apu", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "PC Engines"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "apu1") |
| } |
| }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(dmi, apu_led_dmi_table); |
| |
| static void apu1_led_brightness_set(struct led_classdev *led, enum led_brightness value) |
| { |
| struct apu_led_priv *pled = cdev_to_priv(led); |
| |
| spin_lock(&apu_led->lock); |
| iowrite8(value ? APU1_LEDON : APU1_LEDOFF, pled->param.addr); |
| spin_unlock(&apu_led->lock); |
| } |
| |
| static int apu_led_config(struct device *dev, struct apu_led_pdata *apuld) |
| { |
| int i; |
| int err; |
| |
| apu_led->pled = devm_kcalloc(dev, |
| ARRAY_SIZE(apu1_led_profile), sizeof(struct apu_led_priv), |
| GFP_KERNEL); |
| |
| if (!apu_led->pled) |
| return -ENOMEM; |
| |
| for (i = 0; i < ARRAY_SIZE(apu1_led_profile); i++) { |
| struct apu_led_priv *pled = &apu_led->pled[i]; |
| struct led_classdev *led_cdev = &pled->cdev; |
| |
| led_cdev->name = apu1_led_profile[i].name; |
| led_cdev->brightness = apu1_led_profile[i].brightness; |
| led_cdev->max_brightness = 1; |
| led_cdev->flags = LED_CORE_SUSPENDRESUME; |
| led_cdev->brightness_set = apu1_led_brightness_set; |
| |
| pled->param.addr = devm_ioremap(dev, |
| apu1_led_profile[i].offset, APU1_IOSIZE); |
| if (!pled->param.addr) { |
| err = -ENOMEM; |
| goto error; |
| } |
| |
| err = led_classdev_register(dev, led_cdev); |
| if (err) |
| goto error; |
| |
| apu1_led_brightness_set(led_cdev, apu1_led_profile[i].brightness); |
| } |
| |
| return 0; |
| |
| error: |
| while (i-- > 0) |
| led_classdev_unregister(&apu_led->pled[i].cdev); |
| |
| return err; |
| } |
| |
| static int __init apu_led_probe(struct platform_device *pdev) |
| { |
| apu_led = devm_kzalloc(&pdev->dev, sizeof(*apu_led), GFP_KERNEL); |
| |
| if (!apu_led) |
| return -ENOMEM; |
| |
| apu_led->pdev = pdev; |
| |
| spin_lock_init(&apu_led->lock); |
| return apu_led_config(&pdev->dev, apu_led); |
| } |
| |
| static struct platform_driver apu_led_driver = { |
| .driver = { |
| .name = KBUILD_MODNAME, |
| }, |
| }; |
| |
| static int __init apu_led_init(void) |
| { |
| struct platform_device *pdev; |
| int err; |
| |
| if (!dmi_check_system(apu_led_dmi_table)) { |
| pr_err("No PC Engines APUv1 board detected. For APUv2,3 support, enable CONFIG_PCENGINES_APU2\n"); |
| return -ENODEV; |
| } |
| |
| pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0); |
| if (IS_ERR(pdev)) { |
| pr_err("Device allocation failed\n"); |
| return PTR_ERR(pdev); |
| } |
| |
| err = platform_driver_probe(&apu_led_driver, apu_led_probe); |
| if (err) { |
| pr_err("Probe platform driver failed\n"); |
| platform_device_unregister(pdev); |
| } |
| |
| return err; |
| } |
| |
| static void __exit apu_led_exit(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(apu1_led_profile); i++) |
| led_classdev_unregister(&apu_led->pled[i].cdev); |
| |
| platform_device_unregister(apu_led->pdev); |
| platform_driver_unregister(&apu_led_driver); |
| } |
| |
| module_init(apu_led_init); |
| module_exit(apu_led_exit); |
| |
| MODULE_AUTHOR("Alan Mizrahi"); |
| MODULE_DESCRIPTION("PC Engines APU1 front LED driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:leds_apu"); |