| // SPDX-License-Identifier: GPL-2.0-only |
| #include <linux/i2c.h> |
| #include <linux/mfd/core.h> |
| #include <linux/module.h> |
| #include <linux/notifier.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/reboot.h> |
| #include <linux/regmap.h> |
| |
| #include <linux/mfd/88pm886.h> |
| |
| static const struct regmap_config pm886_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = PM886_REG_RTC_SPARE6, |
| }; |
| |
| static struct regmap_irq pm886_regmap_irqs[] = { |
| REGMAP_IRQ_REG(PM886_IRQ_ONKEY, 0, PM886_INT_ENA1_ONKEY), |
| }; |
| |
| static struct regmap_irq_chip pm886_regmap_irq_chip = { |
| .name = "88pm886", |
| .irqs = pm886_regmap_irqs, |
| .num_irqs = ARRAY_SIZE(pm886_regmap_irqs), |
| .num_regs = 4, |
| .status_base = PM886_REG_INT_STATUS1, |
| .ack_base = PM886_REG_INT_STATUS1, |
| .unmask_base = PM886_REG_INT_ENA_1, |
| }; |
| |
| static struct resource pm886_onkey_resources[] = { |
| DEFINE_RES_IRQ_NAMED(PM886_IRQ_ONKEY, "88pm886-onkey"), |
| }; |
| |
| static struct mfd_cell pm886_devs[] = { |
| MFD_CELL_RES("88pm886-onkey", pm886_onkey_resources), |
| MFD_CELL_NAME("88pm886-regulator"), |
| }; |
| |
| static int pm886_power_off_handler(struct sys_off_data *sys_off_data) |
| { |
| struct pm886_chip *chip = sys_off_data->cb_data; |
| struct regmap *regmap = chip->regmap; |
| struct device *dev = &chip->client->dev; |
| int err; |
| |
| err = regmap_update_bits(regmap, PM886_REG_MISC_CONFIG1, PM886_SW_PDOWN, PM886_SW_PDOWN); |
| if (err) { |
| dev_err(dev, "Failed to power off the device: %d\n", err); |
| return NOTIFY_BAD; |
| } |
| return NOTIFY_DONE; |
| } |
| |
| static int pm886_setup_irq(struct pm886_chip *chip, |
| struct regmap_irq_chip_data **irq_data) |
| { |
| struct regmap *regmap = chip->regmap; |
| struct device *dev = &chip->client->dev; |
| int err; |
| |
| /* Set interrupt clearing mode to clear on write. */ |
| err = regmap_update_bits(regmap, PM886_REG_MISC_CONFIG2, |
| PM886_INT_INV | PM886_INT_CLEAR | PM886_INT_MASK_MODE, |
| PM886_INT_WC); |
| if (err) { |
| dev_err(dev, "Failed to set interrupt clearing mode: %d\n", err); |
| return err; |
| } |
| |
| err = devm_regmap_add_irq_chip(dev, regmap, chip->client->irq, |
| IRQF_ONESHOT, 0, &pm886_regmap_irq_chip, |
| irq_data); |
| if (err) { |
| dev_err(dev, "Failed to request IRQ: %d\n", err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int pm886_probe(struct i2c_client *client) |
| { |
| struct regmap_irq_chip_data *irq_data; |
| struct device *dev = &client->dev; |
| struct pm886_chip *chip; |
| struct regmap *regmap; |
| unsigned int chip_id; |
| int err; |
| |
| chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| chip->client = client; |
| chip->chip_id = (uintptr_t)device_get_match_data(dev); |
| i2c_set_clientdata(client, chip); |
| |
| regmap = devm_regmap_init_i2c(client, &pm886_regmap_config); |
| if (IS_ERR(regmap)) |
| return dev_err_probe(dev, PTR_ERR(regmap), "Failed to initialize regmap\n"); |
| chip->regmap = regmap; |
| |
| err = regmap_read(regmap, PM886_REG_ID, &chip_id); |
| if (err) |
| return dev_err_probe(dev, err, "Failed to read chip ID\n"); |
| |
| if (chip->chip_id != chip_id) |
| return dev_err_probe(dev, -EINVAL, "Unsupported chip: 0x%x\n", chip_id); |
| |
| err = pm886_setup_irq(chip, &irq_data); |
| if (err) |
| return err; |
| |
| err = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, pm886_devs, ARRAY_SIZE(pm886_devs), |
| NULL, 0, regmap_irq_get_domain(irq_data)); |
| if (err) |
| return dev_err_probe(dev, err, "Failed to add devices\n"); |
| |
| err = devm_register_power_off_handler(dev, pm886_power_off_handler, chip); |
| if (err) |
| return dev_err_probe(dev, err, "Failed to register power off handler\n"); |
| |
| device_init_wakeup(dev, device_property_read_bool(dev, "wakeup-source")); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id pm886_of_match[] = { |
| { .compatible = "marvell,88pm886-a1", .data = (void *)PM886_A1_CHIP_ID }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, pm886_of_match); |
| |
| static struct i2c_driver pm886_i2c_driver = { |
| .driver = { |
| .name = "88pm886", |
| .of_match_table = pm886_of_match, |
| }, |
| .probe = pm886_probe, |
| }; |
| module_i2c_driver(pm886_i2c_driver); |
| |
| MODULE_DESCRIPTION("Marvell 88PM886 PMIC driver"); |
| MODULE_AUTHOR("Karel Balej <balejk@matfyz.cz>"); |
| MODULE_LICENSE("GPL"); |