| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * A driver for the Integrated Circuits ICS932S401 |
| * Copyright (C) 2008 IBM |
| * |
| * Author: Darrick J. Wong <darrick.wong@oracle.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/jiffies.h> |
| #include <linux/i2c.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/delay.h> |
| #include <linux/log2.h> |
| #include <linux/slab.h> |
| |
| /* Addresses to scan */ |
| static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END }; |
| |
| /* ICS932S401 registers */ |
| #define ICS932S401_REG_CFG2 0x01 |
| #define ICS932S401_CFG1_SPREAD 0x01 |
| #define ICS932S401_REG_CFG7 0x06 |
| #define ICS932S401_FS_MASK 0x07 |
| #define ICS932S401_REG_VENDOR_REV 0x07 |
| #define ICS932S401_VENDOR 1 |
| #define ICS932S401_VENDOR_MASK 0x0F |
| #define ICS932S401_REV 4 |
| #define ICS932S401_REV_SHIFT 4 |
| #define ICS932S401_REG_DEVICE 0x09 |
| #define ICS932S401_DEVICE 11 |
| #define ICS932S401_REG_CTRL 0x0A |
| #define ICS932S401_MN_ENABLED 0x80 |
| #define ICS932S401_CPU_ALT 0x04 |
| #define ICS932S401_SRC_ALT 0x08 |
| #define ICS932S401_REG_CPU_M_CTRL 0x0B |
| #define ICS932S401_M_MASK 0x3F |
| #define ICS932S401_REG_CPU_N_CTRL 0x0C |
| #define ICS932S401_REG_CPU_SPREAD1 0x0D |
| #define ICS932S401_REG_CPU_SPREAD2 0x0E |
| #define ICS932S401_SPREAD_MASK 0x7FFF |
| #define ICS932S401_REG_SRC_M_CTRL 0x0F |
| #define ICS932S401_REG_SRC_N_CTRL 0x10 |
| #define ICS932S401_REG_SRC_SPREAD1 0x11 |
| #define ICS932S401_REG_SRC_SPREAD2 0x12 |
| #define ICS932S401_REG_CPU_DIVISOR 0x13 |
| #define ICS932S401_CPU_DIVISOR_SHIFT 4 |
| #define ICS932S401_REG_PCISRC_DIVISOR 0x14 |
| #define ICS932S401_SRC_DIVISOR_MASK 0x0F |
| #define ICS932S401_PCI_DIVISOR_SHIFT 4 |
| |
| /* Base clock is 14.318MHz */ |
| #define BASE_CLOCK 14318 |
| |
| #define NUM_REGS 21 |
| #define NUM_MIRRORED_REGS 15 |
| |
| static int regs_to_copy[NUM_MIRRORED_REGS] = { |
| ICS932S401_REG_CFG2, |
| ICS932S401_REG_CFG7, |
| ICS932S401_REG_VENDOR_REV, |
| ICS932S401_REG_DEVICE, |
| ICS932S401_REG_CTRL, |
| ICS932S401_REG_CPU_M_CTRL, |
| ICS932S401_REG_CPU_N_CTRL, |
| ICS932S401_REG_CPU_SPREAD1, |
| ICS932S401_REG_CPU_SPREAD2, |
| ICS932S401_REG_SRC_M_CTRL, |
| ICS932S401_REG_SRC_N_CTRL, |
| ICS932S401_REG_SRC_SPREAD1, |
| ICS932S401_REG_SRC_SPREAD2, |
| ICS932S401_REG_CPU_DIVISOR, |
| ICS932S401_REG_PCISRC_DIVISOR, |
| }; |
| |
| /* How often do we reread sensors values? (In jiffies) */ |
| #define SENSOR_REFRESH_INTERVAL (2 * HZ) |
| |
| /* How often do we reread sensor limit values? (In jiffies) */ |
| #define LIMIT_REFRESH_INTERVAL (60 * HZ) |
| |
| struct ics932s401_data { |
| struct attribute_group attrs; |
| struct mutex lock; |
| char sensors_valid; |
| unsigned long sensors_last_updated; /* In jiffies */ |
| |
| u8 regs[NUM_REGS]; |
| }; |
| |
| static int ics932s401_probe(struct i2c_client *client); |
| static int ics932s401_detect(struct i2c_client *client, |
| struct i2c_board_info *info); |
| static void ics932s401_remove(struct i2c_client *client); |
| |
| static const struct i2c_device_id ics932s401_id[] = { |
| { "ics932s401" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, ics932s401_id); |
| |
| static struct i2c_driver ics932s401_driver = { |
| .class = I2C_CLASS_HWMON, |
| .driver = { |
| .name = "ics932s401", |
| }, |
| .probe = ics932s401_probe, |
| .remove = ics932s401_remove, |
| .id_table = ics932s401_id, |
| .detect = ics932s401_detect, |
| .address_list = normal_i2c, |
| }; |
| |
| static struct ics932s401_data *ics932s401_update_device(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct ics932s401_data *data = i2c_get_clientdata(client); |
| unsigned long local_jiffies = jiffies; |
| int i, temp; |
| |
| mutex_lock(&data->lock); |
| if (time_before(local_jiffies, data->sensors_last_updated + |
| SENSOR_REFRESH_INTERVAL) |
| && data->sensors_valid) |
| goto out; |
| |
| /* |
| * Each register must be read as a word and then right shifted 8 bits. |
| * Not really sure why this is; setting the "byte count programming" |
| * register to 1 does not fix this problem. |
| */ |
| for (i = 0; i < NUM_MIRRORED_REGS; i++) { |
| temp = i2c_smbus_read_word_data(client, regs_to_copy[i]); |
| if (temp < 0) |
| temp = 0; |
| data->regs[regs_to_copy[i]] = temp >> 8; |
| } |
| |
| data->sensors_last_updated = local_jiffies; |
| data->sensors_valid = 1; |
| |
| out: |
| mutex_unlock(&data->lock); |
| return data; |
| } |
| |
| static ssize_t show_spread_enabled(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct ics932s401_data *data = ics932s401_update_device(dev); |
| |
| if (data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD) |
| return sprintf(buf, "1\n"); |
| |
| return sprintf(buf, "0\n"); |
| } |
| |
| /* bit to cpu khz map */ |
| static const int fs_speeds[] = { |
| 266666, |
| 133333, |
| 200000, |
| 166666, |
| 333333, |
| 100000, |
| 400000, |
| 0, |
| }; |
| |
| /* clock divisor map */ |
| static const int divisors[] = {2, 3, 5, 15, 4, 6, 10, 30, 8, 12, 20, 60, 16, |
| 24, 40, 120}; |
| |
| /* Calculate CPU frequency from the M/N registers. */ |
| static int calculate_cpu_freq(struct ics932s401_data *data) |
| { |
| int m, n, freq; |
| |
| m = data->regs[ICS932S401_REG_CPU_M_CTRL] & ICS932S401_M_MASK; |
| n = data->regs[ICS932S401_REG_CPU_N_CTRL]; |
| |
| /* Pull in bits 8 & 9 from the M register */ |
| n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x80) << 1; |
| n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x40) << 3; |
| |
| freq = BASE_CLOCK * (n + 8) / (m + 2); |
| freq /= divisors[data->regs[ICS932S401_REG_CPU_DIVISOR] >> |
| ICS932S401_CPU_DIVISOR_SHIFT]; |
| |
| return freq; |
| } |
| |
| static ssize_t show_cpu_clock(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct ics932s401_data *data = ics932s401_update_device(dev); |
| |
| return sprintf(buf, "%d\n", calculate_cpu_freq(data)); |
| } |
| |
| static ssize_t show_cpu_clock_sel(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct ics932s401_data *data = ics932s401_update_device(dev); |
| int freq; |
| |
| if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) |
| freq = calculate_cpu_freq(data); |
| else { |
| /* Freq is neatly wrapped up for us */ |
| int fid = data->regs[ICS932S401_REG_CFG7] & ICS932S401_FS_MASK; |
| |
| freq = fs_speeds[fid]; |
| if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT) { |
| switch (freq) { |
| case 166666: |
| freq = 160000; |
| break; |
| case 333333: |
| freq = 320000; |
| break; |
| } |
| } |
| } |
| |
| return sprintf(buf, "%d\n", freq); |
| } |
| |
| /* Calculate SRC frequency from the M/N registers. */ |
| static int calculate_src_freq(struct ics932s401_data *data) |
| { |
| int m, n, freq; |
| |
| m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; |
| n = data->regs[ICS932S401_REG_SRC_N_CTRL]; |
| |
| /* Pull in bits 8 & 9 from the M register */ |
| n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; |
| n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; |
| |
| freq = BASE_CLOCK * (n + 8) / (m + 2); |
| freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] & |
| ICS932S401_SRC_DIVISOR_MASK]; |
| |
| return freq; |
| } |
| |
| static ssize_t show_src_clock(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct ics932s401_data *data = ics932s401_update_device(dev); |
| |
| return sprintf(buf, "%d\n", calculate_src_freq(data)); |
| } |
| |
| static ssize_t show_src_clock_sel(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct ics932s401_data *data = ics932s401_update_device(dev); |
| int freq; |
| |
| if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) |
| freq = calculate_src_freq(data); |
| else |
| /* Freq is neatly wrapped up for us */ |
| if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT && |
| data->regs[ICS932S401_REG_CTRL] & ICS932S401_SRC_ALT) |
| freq = 96000; |
| else |
| freq = 100000; |
| |
| return sprintf(buf, "%d\n", freq); |
| } |
| |
| /* Calculate PCI frequency from the SRC M/N registers. */ |
| static int calculate_pci_freq(struct ics932s401_data *data) |
| { |
| int m, n, freq; |
| |
| m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; |
| n = data->regs[ICS932S401_REG_SRC_N_CTRL]; |
| |
| /* Pull in bits 8 & 9 from the M register */ |
| n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; |
| n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; |
| |
| freq = BASE_CLOCK * (n + 8) / (m + 2); |
| freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] >> |
| ICS932S401_PCI_DIVISOR_SHIFT]; |
| |
| return freq; |
| } |
| |
| static ssize_t show_pci_clock(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct ics932s401_data *data = ics932s401_update_device(dev); |
| |
| return sprintf(buf, "%d\n", calculate_pci_freq(data)); |
| } |
| |
| static ssize_t show_pci_clock_sel(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct ics932s401_data *data = ics932s401_update_device(dev); |
| int freq; |
| |
| if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) |
| freq = calculate_pci_freq(data); |
| else |
| freq = 33333; |
| |
| return sprintf(buf, "%d\n", freq); |
| } |
| |
| static ssize_t show_value(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf); |
| |
| static ssize_t show_spread(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf); |
| |
| static DEVICE_ATTR(spread_enabled, S_IRUGO, show_spread_enabled, NULL); |
| static DEVICE_ATTR(cpu_clock_selection, S_IRUGO, show_cpu_clock_sel, NULL); |
| static DEVICE_ATTR(cpu_clock, S_IRUGO, show_cpu_clock, NULL); |
| static DEVICE_ATTR(src_clock_selection, S_IRUGO, show_src_clock_sel, NULL); |
| static DEVICE_ATTR(src_clock, S_IRUGO, show_src_clock, NULL); |
| static DEVICE_ATTR(pci_clock_selection, S_IRUGO, show_pci_clock_sel, NULL); |
| static DEVICE_ATTR(pci_clock, S_IRUGO, show_pci_clock, NULL); |
| static DEVICE_ATTR(usb_clock, S_IRUGO, show_value, NULL); |
| static DEVICE_ATTR(ref_clock, S_IRUGO, show_value, NULL); |
| static DEVICE_ATTR(cpu_spread, S_IRUGO, show_spread, NULL); |
| static DEVICE_ATTR(src_spread, S_IRUGO, show_spread, NULL); |
| |
| static struct attribute *ics932s401_attr[] = { |
| &dev_attr_spread_enabled.attr, |
| &dev_attr_cpu_clock_selection.attr, |
| &dev_attr_cpu_clock.attr, |
| &dev_attr_src_clock_selection.attr, |
| &dev_attr_src_clock.attr, |
| &dev_attr_pci_clock_selection.attr, |
| &dev_attr_pci_clock.attr, |
| &dev_attr_usb_clock.attr, |
| &dev_attr_ref_clock.attr, |
| &dev_attr_cpu_spread.attr, |
| &dev_attr_src_spread.attr, |
| NULL |
| }; |
| |
| static ssize_t show_value(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| int x; |
| |
| if (devattr == &dev_attr_usb_clock) |
| x = 48000; |
| else if (devattr == &dev_attr_ref_clock) |
| x = BASE_CLOCK; |
| else |
| BUG(); |
| |
| return sprintf(buf, "%d\n", x); |
| } |
| |
| static ssize_t show_spread(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct ics932s401_data *data = ics932s401_update_device(dev); |
| int reg; |
| unsigned long val; |
| |
| if (!(data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD)) |
| return sprintf(buf, "0%%\n"); |
| |
| if (devattr == &dev_attr_src_spread) |
| reg = ICS932S401_REG_SRC_SPREAD1; |
| else if (devattr == &dev_attr_cpu_spread) |
| reg = ICS932S401_REG_CPU_SPREAD1; |
| else |
| BUG(); |
| |
| val = data->regs[reg] | (data->regs[reg + 1] << 8); |
| val &= ICS932S401_SPREAD_MASK; |
| |
| /* Scale 0..2^14 to -0.5. */ |
| val = 500000 * val / 16384; |
| return sprintf(buf, "-0.%lu%%\n", val); |
| } |
| |
| /* Return 0 if detection is successful, -ENODEV otherwise */ |
| static int ics932s401_detect(struct i2c_client *client, |
| struct i2c_board_info *info) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| int vendor, device, revision; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -ENODEV; |
| |
| vendor = i2c_smbus_read_word_data(client, ICS932S401_REG_VENDOR_REV); |
| vendor >>= 8; |
| revision = vendor >> ICS932S401_REV_SHIFT; |
| vendor &= ICS932S401_VENDOR_MASK; |
| if (vendor != ICS932S401_VENDOR) |
| return -ENODEV; |
| |
| device = i2c_smbus_read_word_data(client, ICS932S401_REG_DEVICE); |
| device >>= 8; |
| if (device != ICS932S401_DEVICE) |
| return -ENODEV; |
| |
| if (revision != ICS932S401_REV) |
| dev_info(&adapter->dev, "Unknown revision %d\n", revision); |
| |
| strscpy(info->type, "ics932s401", I2C_NAME_SIZE); |
| |
| return 0; |
| } |
| |
| static int ics932s401_probe(struct i2c_client *client) |
| { |
| struct ics932s401_data *data; |
| int err; |
| |
| data = kzalloc(sizeof(struct ics932s401_data), GFP_KERNEL); |
| if (!data) { |
| err = -ENOMEM; |
| goto exit; |
| } |
| |
| i2c_set_clientdata(client, data); |
| mutex_init(&data->lock); |
| |
| dev_info(&client->dev, "%s chip found\n", client->name); |
| |
| /* Register sysfs hooks */ |
| data->attrs.attrs = ics932s401_attr; |
| err = sysfs_create_group(&client->dev.kobj, &data->attrs); |
| if (err) |
| goto exit_free; |
| |
| return 0; |
| |
| exit_free: |
| kfree(data); |
| exit: |
| return err; |
| } |
| |
| static void ics932s401_remove(struct i2c_client *client) |
| { |
| struct ics932s401_data *data = i2c_get_clientdata(client); |
| |
| sysfs_remove_group(&client->dev.kobj, &data->attrs); |
| kfree(data); |
| } |
| |
| module_i2c_driver(ics932s401_driver); |
| |
| MODULE_AUTHOR("Darrick J. Wong <darrick.wong@oracle.com>"); |
| MODULE_DESCRIPTION("ICS932S401 driver"); |
| MODULE_LICENSE("GPL"); |
| |
| /* IBM IntelliStation Z30 */ |
| MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*"); |
| MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*"); |
| |
| /* IBM x3650/x3550 */ |
| MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*"); |
| MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*"); |