| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2018 HiSilicon Technologies Co., Ltd. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/mmc/host.h> |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include "dw_mmc.h" |
| #include "dw_mmc-pltfm.h" |
| |
| #define ALL_INT_CLR 0x1ffff |
| |
| struct hi3798cv200_priv { |
| struct clk *sample_clk; |
| struct clk *drive_clk; |
| }; |
| |
| static void dw_mci_hi3798cv200_set_ios(struct dw_mci *host, struct mmc_ios *ios) |
| { |
| struct hi3798cv200_priv *priv = host->priv; |
| u32 val; |
| |
| val = mci_readl(host, UHS_REG); |
| if (ios->timing == MMC_TIMING_MMC_DDR52 || |
| ios->timing == MMC_TIMING_UHS_DDR50) |
| val |= SDMMC_UHS_DDR; |
| else |
| val &= ~SDMMC_UHS_DDR; |
| mci_writel(host, UHS_REG, val); |
| |
| val = mci_readl(host, ENABLE_SHIFT); |
| if (ios->timing == MMC_TIMING_MMC_DDR52) |
| val |= SDMMC_ENABLE_PHASE; |
| else |
| val &= ~SDMMC_ENABLE_PHASE; |
| mci_writel(host, ENABLE_SHIFT, val); |
| |
| val = mci_readl(host, DDR_REG); |
| if (ios->timing == MMC_TIMING_MMC_HS400) |
| val |= SDMMC_DDR_HS400; |
| else |
| val &= ~SDMMC_DDR_HS400; |
| mci_writel(host, DDR_REG, val); |
| |
| if (ios->timing == MMC_TIMING_MMC_HS || |
| ios->timing == MMC_TIMING_LEGACY) |
| clk_set_phase(priv->drive_clk, 180); |
| else if (ios->timing == MMC_TIMING_MMC_HS200) |
| clk_set_phase(priv->drive_clk, 135); |
| } |
| |
| static int dw_mci_hi3798cv200_execute_tuning(struct dw_mci_slot *slot, |
| u32 opcode) |
| { |
| static const int degrees[] = { 0, 45, 90, 135, 180, 225, 270, 315 }; |
| struct dw_mci *host = slot->host; |
| struct hi3798cv200_priv *priv = host->priv; |
| int raise_point = -1, fall_point = -1; |
| int err, prev_err = -1; |
| int found = 0; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(degrees); i++) { |
| clk_set_phase(priv->sample_clk, degrees[i]); |
| mci_writel(host, RINTSTS, ALL_INT_CLR); |
| |
| err = mmc_send_tuning(slot->mmc, opcode, NULL); |
| if (!err) |
| found = 1; |
| |
| if (i > 0) { |
| if (err && !prev_err) |
| fall_point = i - 1; |
| if (!err && prev_err) |
| raise_point = i; |
| } |
| |
| if (raise_point != -1 && fall_point != -1) |
| goto tuning_out; |
| |
| prev_err = err; |
| } |
| |
| tuning_out: |
| if (found) { |
| if (raise_point == -1) |
| raise_point = 0; |
| if (fall_point == -1) |
| fall_point = ARRAY_SIZE(degrees) - 1; |
| if (fall_point < raise_point) { |
| if ((raise_point + fall_point) > |
| (ARRAY_SIZE(degrees) - 1)) |
| i = fall_point / 2; |
| else |
| i = (raise_point + ARRAY_SIZE(degrees) - 1) / 2; |
| } else { |
| i = (raise_point + fall_point) / 2; |
| } |
| |
| clk_set_phase(priv->sample_clk, degrees[i]); |
| dev_dbg(host->dev, "Tuning clk_sample[%d, %d], set[%d]\n", |
| raise_point, fall_point, degrees[i]); |
| } else { |
| dev_err(host->dev, "No valid clk_sample shift! use default\n"); |
| err = -EINVAL; |
| } |
| |
| mci_writel(host, RINTSTS, ALL_INT_CLR); |
| return err; |
| } |
| |
| static int dw_mci_hi3798cv200_init(struct dw_mci *host) |
| { |
| struct hi3798cv200_priv *priv; |
| int ret; |
| |
| priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->sample_clk = devm_clk_get(host->dev, "ciu-sample"); |
| if (IS_ERR(priv->sample_clk)) { |
| dev_err(host->dev, "failed to get ciu-sample clock\n"); |
| return PTR_ERR(priv->sample_clk); |
| } |
| |
| priv->drive_clk = devm_clk_get(host->dev, "ciu-drive"); |
| if (IS_ERR(priv->drive_clk)) { |
| dev_err(host->dev, "failed to get ciu-drive clock\n"); |
| return PTR_ERR(priv->drive_clk); |
| } |
| |
| ret = clk_prepare_enable(priv->sample_clk); |
| if (ret) { |
| dev_err(host->dev, "failed to enable ciu-sample clock\n"); |
| return ret; |
| } |
| |
| ret = clk_prepare_enable(priv->drive_clk); |
| if (ret) { |
| dev_err(host->dev, "failed to enable ciu-drive clock\n"); |
| goto disable_sample_clk; |
| } |
| |
| host->priv = priv; |
| return 0; |
| |
| disable_sample_clk: |
| clk_disable_unprepare(priv->sample_clk); |
| return ret; |
| } |
| |
| static const struct dw_mci_drv_data hi3798cv200_data = { |
| .common_caps = MMC_CAP_CMD23, |
| .init = dw_mci_hi3798cv200_init, |
| .set_ios = dw_mci_hi3798cv200_set_ios, |
| .execute_tuning = dw_mci_hi3798cv200_execute_tuning, |
| }; |
| |
| static int dw_mci_hi3798cv200_probe(struct platform_device *pdev) |
| { |
| return dw_mci_pltfm_register(pdev, &hi3798cv200_data); |
| } |
| |
| static void dw_mci_hi3798cv200_remove(struct platform_device *pdev) |
| { |
| struct dw_mci *host = platform_get_drvdata(pdev); |
| struct hi3798cv200_priv *priv = host->priv; |
| |
| clk_disable_unprepare(priv->drive_clk); |
| clk_disable_unprepare(priv->sample_clk); |
| |
| dw_mci_pltfm_remove(pdev); |
| } |
| |
| static const struct of_device_id dw_mci_hi3798cv200_match[] = { |
| { .compatible = "hisilicon,hi3798cv200-dw-mshc", }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, dw_mci_hi3798cv200_match); |
| static struct platform_driver dw_mci_hi3798cv200_driver = { |
| .probe = dw_mci_hi3798cv200_probe, |
| .remove_new = dw_mci_hi3798cv200_remove, |
| .driver = { |
| .name = "dwmmc_hi3798cv200", |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| .of_match_table = dw_mci_hi3798cv200_match, |
| }, |
| }; |
| module_platform_driver(dw_mci_hi3798cv200_driver); |
| |
| MODULE_DESCRIPTION("HiSilicon Hi3798CV200 Specific DW-MSHC Driver Extension"); |
| MODULE_LICENSE("GPL v2"); |