| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com> |
| */ |
| |
| #ifndef __MT7530_H |
| #define __MT7530_H |
| |
| #define MT7530_NUM_PORTS 7 |
| #define MT7530_NUM_PHYS 5 |
| #define MT7530_NUM_FDB_RECORDS 2048 |
| #define MT7530_ALL_MEMBERS 0xff |
| |
| #define MTK_HDR_LEN 4 |
| #define MT7530_MAX_MTU (15 * 1024 - ETH_HLEN - ETH_FCS_LEN - MTK_HDR_LEN) |
| |
| enum mt753x_id { |
| ID_MT7530 = 0, |
| ID_MT7621 = 1, |
| ID_MT7531 = 2, |
| ID_MT7988 = 3, |
| ID_EN7581 = 4, |
| }; |
| |
| #define NUM_TRGMII_CTRL 5 |
| |
| #define TRGMII_BASE(x) (0x10000 + (x)) |
| |
| /* Registers to ethsys access */ |
| #define ETHSYS_CLKCFG0 0x2c |
| #define ETHSYS_TRGMII_CLK_SEL362_5 BIT(11) |
| |
| #define SYSC_REG_RSTCTRL 0x34 |
| #define RESET_MCM BIT(2) |
| |
| /* Register for ARL global control */ |
| #define MT753X_AGC 0xc |
| #define LOCAL_EN BIT(7) |
| |
| /* Register for MAC forward control */ |
| #define MT753X_MFC 0x10 |
| #define BC_FFP_MASK GENMASK(31, 24) |
| #define BC_FFP(x) FIELD_PREP(BC_FFP_MASK, x) |
| #define UNM_FFP_MASK GENMASK(23, 16) |
| #define UNM_FFP(x) FIELD_PREP(UNM_FFP_MASK, x) |
| #define UNU_FFP_MASK GENMASK(15, 8) |
| #define UNU_FFP(x) FIELD_PREP(UNU_FFP_MASK, x) |
| #define MT7530_CPU_EN BIT(7) |
| #define MT7530_CPU_PORT_MASK GENMASK(6, 4) |
| #define MT7530_CPU_PORT(x) FIELD_PREP(MT7530_CPU_PORT_MASK, x) |
| #define MT7530_MIRROR_EN BIT(3) |
| #define MT7530_MIRROR_PORT_MASK GENMASK(2, 0) |
| #define MT7530_MIRROR_PORT_GET(x) FIELD_GET(MT7530_MIRROR_PORT_MASK, x) |
| #define MT7530_MIRROR_PORT_SET(x) FIELD_PREP(MT7530_MIRROR_PORT_MASK, x) |
| #define MT7531_QRY_FFP_MASK GENMASK(7, 0) |
| #define MT7531_QRY_FFP(x) FIELD_PREP(MT7531_QRY_FFP_MASK, x) |
| |
| /* Register for CPU forward control */ |
| #define MT7531_CFC 0x4 |
| #define MT7531_MIRROR_EN BIT(19) |
| #define MT7531_MIRROR_PORT_MASK GENMASK(18, 16) |
| #define MT7531_MIRROR_PORT_GET(x) FIELD_GET(MT7531_MIRROR_PORT_MASK, x) |
| #define MT7531_MIRROR_PORT_SET(x) FIELD_PREP(MT7531_MIRROR_PORT_MASK, x) |
| #define MT7531_CPU_PMAP_MASK GENMASK(7, 0) |
| #define MT7531_CPU_PMAP(x) FIELD_PREP(MT7531_CPU_PMAP_MASK, x) |
| |
| #define MT753X_MIRROR_REG(id) ((id == ID_MT7531 || \ |
| id == ID_MT7988 || \ |
| id == ID_EN7581) ? \ |
| MT7531_CFC : MT753X_MFC) |
| |
| #define MT753X_MIRROR_EN(id) ((id == ID_MT7531 || \ |
| id == ID_MT7988 || \ |
| id == ID_EN7581) ? \ |
| MT7531_MIRROR_EN : MT7530_MIRROR_EN) |
| |
| #define MT753X_MIRROR_PORT_MASK(id) ((id == ID_MT7531 || \ |
| id == ID_MT7988 || \ |
| id == ID_EN7581) ? \ |
| MT7531_MIRROR_PORT_MASK : \ |
| MT7530_MIRROR_PORT_MASK) |
| |
| #define MT753X_MIRROR_PORT_GET(id, val) ((id == ID_MT7531 || \ |
| id == ID_MT7988 || \ |
| id == ID_EN7581) ? \ |
| MT7531_MIRROR_PORT_GET(val) : \ |
| MT7530_MIRROR_PORT_GET(val)) |
| |
| #define MT753X_MIRROR_PORT_SET(id, val) ((id == ID_MT7531 || \ |
| id == ID_MT7988 || \ |
| id == ID_EN7581) ? \ |
| MT7531_MIRROR_PORT_SET(val) : \ |
| MT7530_MIRROR_PORT_SET(val)) |
| |
| /* Register for BPDU and PAE frame control */ |
| #define MT753X_BPC 0x24 |
| #define PAE_BPDU_FR BIT(25) |
| #define PAE_EG_TAG_MASK GENMASK(24, 22) |
| #define PAE_EG_TAG(x) FIELD_PREP(PAE_EG_TAG_MASK, x) |
| #define PAE_PORT_FW_MASK GENMASK(18, 16) |
| #define PAE_PORT_FW(x) FIELD_PREP(PAE_PORT_FW_MASK, x) |
| #define BPDU_EG_TAG_MASK GENMASK(8, 6) |
| #define BPDU_EG_TAG(x) FIELD_PREP(BPDU_EG_TAG_MASK, x) |
| #define BPDU_PORT_FW_MASK GENMASK(2, 0) |
| |
| /* Register for 01-80-C2-00-00-[01,02] MAC DA frame control */ |
| #define MT753X_RGAC1 0x28 |
| #define R02_BPDU_FR BIT(25) |
| #define R02_EG_TAG_MASK GENMASK(24, 22) |
| #define R02_EG_TAG(x) FIELD_PREP(R02_EG_TAG_MASK, x) |
| #define R02_PORT_FW_MASK GENMASK(18, 16) |
| #define R02_PORT_FW(x) FIELD_PREP(R02_PORT_FW_MASK, x) |
| #define R01_BPDU_FR BIT(9) |
| #define R01_EG_TAG_MASK GENMASK(8, 6) |
| #define R01_EG_TAG(x) FIELD_PREP(R01_EG_TAG_MASK, x) |
| #define R01_PORT_FW_MASK GENMASK(2, 0) |
| |
| /* Register for 01-80-C2-00-00-[03,0E] MAC DA frame control */ |
| #define MT753X_RGAC2 0x2c |
| #define R0E_BPDU_FR BIT(25) |
| #define R0E_EG_TAG_MASK GENMASK(24, 22) |
| #define R0E_EG_TAG(x) FIELD_PREP(R0E_EG_TAG_MASK, x) |
| #define R0E_PORT_FW_MASK GENMASK(18, 16) |
| #define R0E_PORT_FW(x) FIELD_PREP(R0E_PORT_FW_MASK, x) |
| #define R03_BPDU_FR BIT(9) |
| #define R03_EG_TAG_MASK GENMASK(8, 6) |
| #define R03_EG_TAG(x) FIELD_PREP(R03_EG_TAG_MASK, x) |
| #define R03_PORT_FW_MASK GENMASK(2, 0) |
| |
| enum mt753x_to_cpu_fw { |
| TO_CPU_FW_SYSTEM_DEFAULT, |
| TO_CPU_FW_CPU_EXCLUDE = 4, |
| TO_CPU_FW_CPU_INCLUDE = 5, |
| TO_CPU_FW_CPU_ONLY = 6, |
| TO_CPU_FW_DROP = 7, |
| }; |
| |
| /* Registers for address table access */ |
| #define MT7530_ATA1 0x74 |
| #define STATIC_EMP 0 |
| #define STATIC_ENT 3 |
| #define MT7530_ATA2 0x78 |
| #define ATA2_IVL BIT(15) |
| #define ATA2_FID(x) (((x) & 0x7) << 12) |
| |
| /* Register for address table write data */ |
| #define MT7530_ATWD 0x7c |
| |
| /* Register for address table control */ |
| #define MT7530_ATC 0x80 |
| #define ATC_HASH (((x) & 0xfff) << 16) |
| #define ATC_BUSY BIT(15) |
| #define ATC_SRCH_END BIT(14) |
| #define ATC_SRCH_HIT BIT(13) |
| #define ATC_INVALID BIT(12) |
| #define ATC_MAT(x) (((x) & 0xf) << 8) |
| #define ATC_MAT_MACTAB ATC_MAT(0) |
| |
| enum mt7530_fdb_cmd { |
| MT7530_FDB_READ = 0, |
| MT7530_FDB_WRITE = 1, |
| MT7530_FDB_FLUSH = 2, |
| MT7530_FDB_START = 4, |
| MT7530_FDB_NEXT = 5, |
| }; |
| |
| /* Registers for table search read address */ |
| #define MT7530_TSRA1 0x84 |
| #define MAC_BYTE_0 24 |
| #define MAC_BYTE_1 16 |
| #define MAC_BYTE_2 8 |
| #define MAC_BYTE_3 0 |
| #define MAC_BYTE_MASK 0xff |
| |
| #define MT7530_TSRA2 0x88 |
| #define MAC_BYTE_4 24 |
| #define MAC_BYTE_5 16 |
| #define CVID 0 |
| #define CVID_MASK 0xfff |
| |
| #define MT7530_ATRD 0x8C |
| #define AGE_TIMER 24 |
| #define AGE_TIMER_MASK 0xff |
| #define PORT_MAP 4 |
| #define PORT_MAP_MASK 0xff |
| #define ENT_STATUS 2 |
| #define ENT_STATUS_MASK 0x3 |
| |
| /* Register for vlan table control */ |
| #define MT7530_VTCR 0x90 |
| #define VTCR_BUSY BIT(31) |
| #define VTCR_INVALID BIT(16) |
| #define VTCR_FUNC(x) (((x) & 0xf) << 12) |
| #define VTCR_VID ((x) & 0xfff) |
| |
| enum mt7530_vlan_cmd { |
| /* Read/Write the specified VID entry from VAWD register based |
| * on VID. |
| */ |
| MT7530_VTCR_RD_VID = 0, |
| MT7530_VTCR_WR_VID = 1, |
| }; |
| |
| /* Register for setup vlan and acl write data */ |
| #define MT7530_VAWD1 0x94 |
| #define PORT_STAG BIT(31) |
| /* Independent VLAN Learning */ |
| #define IVL_MAC BIT(30) |
| /* Egress Tag Consistent */ |
| #define EG_CON BIT(29) |
| /* Per VLAN Egress Tag Control */ |
| #define VTAG_EN BIT(28) |
| /* VLAN Member Control */ |
| #define PORT_MEM(x) (((x) & 0xff) << 16) |
| /* Filter ID */ |
| #define FID(x) (((x) & 0x7) << 1) |
| /* VLAN Entry Valid */ |
| #define VLAN_VALID BIT(0) |
| #define PORT_MEM_SHFT 16 |
| #define PORT_MEM_MASK 0xff |
| |
| enum mt7530_fid { |
| FID_STANDALONE = 0, |
| FID_BRIDGED = 1, |
| }; |
| |
| #define MT7530_VAWD2 0x98 |
| /* Egress Tag Control */ |
| #define ETAG_CTRL_P(p, x) (((x) & 0x3) << ((p) << 1)) |
| #define ETAG_CTRL_P_MASK(p) ETAG_CTRL_P(p, 3) |
| |
| enum mt7530_vlan_egress_attr { |
| MT7530_VLAN_EGRESS_UNTAG = 0, |
| MT7530_VLAN_EGRESS_TAG = 2, |
| MT7530_VLAN_EGRESS_STACK = 3, |
| }; |
| |
| /* Register for address age control */ |
| #define MT7530_AAC 0xa0 |
| /* Disable ageing */ |
| #define AGE_DIS BIT(20) |
| /* Age count */ |
| #define AGE_CNT_MASK GENMASK(19, 12) |
| #define AGE_CNT_MAX 0xff |
| #define AGE_CNT(x) (AGE_CNT_MASK & ((x) << 12)) |
| /* Age unit */ |
| #define AGE_UNIT_MASK GENMASK(11, 0) |
| #define AGE_UNIT_MAX 0xfff |
| #define AGE_UNIT(x) (AGE_UNIT_MASK & (x)) |
| |
| /* Register for port STP state control */ |
| #define MT7530_SSP_P(x) (0x2000 + ((x) * 0x100)) |
| #define FID_PST(fid, state) (((state) & 0x3) << ((fid) * 2)) |
| #define FID_PST_MASK(fid) FID_PST(fid, 0x3) |
| |
| enum mt7530_stp_state { |
| MT7530_STP_DISABLED = 0, |
| MT7530_STP_BLOCKING = 1, |
| MT7530_STP_LISTENING = 1, |
| MT7530_STP_LEARNING = 2, |
| MT7530_STP_FORWARDING = 3 |
| }; |
| |
| /* Register for port control */ |
| #define MT7530_PCR_P(x) (0x2004 + ((x) * 0x100)) |
| #define PORT_TX_MIR BIT(9) |
| #define PORT_RX_MIR BIT(8) |
| #define PORT_VLAN(x) ((x) & 0x3) |
| |
| enum mt7530_port_mode { |
| /* Port Matrix Mode: Frames are forwarded by the PCR_MATRIX members. */ |
| MT7530_PORT_MATRIX_MODE = PORT_VLAN(0), |
| |
| /* Fallback Mode: Forward received frames with ingress ports that do |
| * not belong to the VLAN member. Frames whose VID is not listed on |
| * the VLAN table are forwarded by the PCR_MATRIX members. |
| */ |
| MT7530_PORT_FALLBACK_MODE = PORT_VLAN(1), |
| |
| /* Security Mode: Discard any frame due to ingress membership |
| * violation or VID missed on the VLAN table. |
| */ |
| MT7530_PORT_SECURITY_MODE = PORT_VLAN(3), |
| }; |
| |
| #define PCR_MATRIX(x) (((x) & 0xff) << 16) |
| #define PORT_PRI(x) (((x) & 0x7) << 24) |
| #define EG_TAG(x) (((x) & 0x3) << 28) |
| #define PCR_MATRIX_MASK PCR_MATRIX(0xff) |
| #define PCR_MATRIX_CLR PCR_MATRIX(0) |
| #define PCR_PORT_VLAN_MASK PORT_VLAN(3) |
| |
| /* Register for port security control */ |
| #define MT7530_PSC_P(x) (0x200c + ((x) * 0x100)) |
| #define SA_DIS BIT(4) |
| |
| /* Register for port vlan control */ |
| #define MT7530_PVC_P(x) (0x2010 + ((x) * 0x100)) |
| #define PORT_SPEC_TAG BIT(5) |
| #define PVC_EG_TAG(x) (((x) & 0x7) << 8) |
| #define PVC_EG_TAG_MASK PVC_EG_TAG(7) |
| #define VLAN_ATTR(x) (((x) & 0x3) << 6) |
| #define VLAN_ATTR_MASK VLAN_ATTR(3) |
| #define ACC_FRM_MASK GENMASK(1, 0) |
| |
| enum mt7530_vlan_port_eg_tag { |
| MT7530_VLAN_EG_DISABLED = 0, |
| MT7530_VLAN_EG_CONSISTENT = 1, |
| MT7530_VLAN_EG_UNTAGGED = 4, |
| }; |
| |
| enum mt7530_vlan_port_attr { |
| MT7530_VLAN_USER = 0, |
| MT7530_VLAN_TRANSPARENT = 3, |
| }; |
| |
| enum mt7530_vlan_port_acc_frm { |
| MT7530_VLAN_ACC_ALL = 0, |
| MT7530_VLAN_ACC_TAGGED = 1, |
| MT7530_VLAN_ACC_UNTAGGED = 2, |
| }; |
| |
| #define STAG_VPID (((x) & 0xffff) << 16) |
| |
| /* Register for port port-and-protocol based vlan 1 control */ |
| #define MT7530_PPBV1_P(x) (0x2014 + ((x) * 0x100)) |
| #define G0_PORT_VID(x) (((x) & 0xfff) << 0) |
| #define G0_PORT_VID_MASK G0_PORT_VID(0xfff) |
| #define G0_PORT_VID_DEF G0_PORT_VID(0) |
| |
| /* Register for port MAC control register */ |
| #define MT753X_PMCR_P(x) (0x3000 + ((x) * 0x100)) |
| #define PMCR_IFG_XMIT_MASK GENMASK(19, 18) |
| #define PMCR_IFG_XMIT(x) FIELD_PREP(PMCR_IFG_XMIT_MASK, x) |
| #define PMCR_EXT_PHY BIT(17) |
| #define PMCR_MAC_MODE BIT(16) |
| #define MT7530_FORCE_MODE BIT(15) |
| #define PMCR_MAC_TX_EN BIT(14) |
| #define PMCR_MAC_RX_EN BIT(13) |
| #define PMCR_BACKOFF_EN BIT(9) |
| #define PMCR_BACKPR_EN BIT(8) |
| #define PMCR_FORCE_EEE1G BIT(7) |
| #define PMCR_FORCE_EEE100 BIT(6) |
| #define PMCR_FORCE_RX_FC_EN BIT(5) |
| #define PMCR_FORCE_TX_FC_EN BIT(4) |
| #define PMCR_FORCE_SPEED_1000 BIT(3) |
| #define PMCR_FORCE_SPEED_100 BIT(2) |
| #define PMCR_FORCE_FDX BIT(1) |
| #define PMCR_FORCE_LNK BIT(0) |
| #define MT7531_FORCE_MODE_LNK BIT(31) |
| #define MT7531_FORCE_MODE_SPD BIT(30) |
| #define MT7531_FORCE_MODE_DPX BIT(29) |
| #define MT7531_FORCE_MODE_RX_FC BIT(28) |
| #define MT7531_FORCE_MODE_TX_FC BIT(27) |
| #define MT7531_FORCE_MODE_EEE100 BIT(26) |
| #define MT7531_FORCE_MODE_EEE1G BIT(25) |
| #define MT7531_FORCE_MODE_MASK (MT7531_FORCE_MODE_LNK | \ |
| MT7531_FORCE_MODE_SPD | \ |
| MT7531_FORCE_MODE_DPX | \ |
| MT7531_FORCE_MODE_RX_FC | \ |
| MT7531_FORCE_MODE_TX_FC | \ |
| MT7531_FORCE_MODE_EEE100 | \ |
| MT7531_FORCE_MODE_EEE1G) |
| #define MT753X_FORCE_MODE(id) ((id == ID_MT7531 || \ |
| id == ID_MT7988) ? \ |
| MT7531_FORCE_MODE_MASK : \ |
| MT7530_FORCE_MODE) |
| #define PMCR_LINK_SETTINGS_MASK (PMCR_MAC_TX_EN | PMCR_MAC_RX_EN | \ |
| PMCR_FORCE_EEE1G | \ |
| PMCR_FORCE_EEE100 | \ |
| PMCR_FORCE_RX_FC_EN | \ |
| PMCR_FORCE_TX_FC_EN | \ |
| PMCR_FORCE_SPEED_1000 | \ |
| PMCR_FORCE_SPEED_100 | \ |
| PMCR_FORCE_FDX | PMCR_FORCE_LNK) |
| |
| #define MT753X_PMEEECR_P(x) (0x3004 + (x) * 0x100) |
| #define WAKEUP_TIME_1000_MASK GENMASK(31, 24) |
| #define WAKEUP_TIME_1000(x) FIELD_PREP(WAKEUP_TIME_1000_MASK, x) |
| #define WAKEUP_TIME_100_MASK GENMASK(23, 16) |
| #define WAKEUP_TIME_100(x) FIELD_PREP(WAKEUP_TIME_100_MASK, x) |
| #define LPI_THRESH_MASK GENMASK(15, 4) |
| #define LPI_THRESH_GET(x) FIELD_GET(LPI_THRESH_MASK, x) |
| #define LPI_THRESH_SET(x) FIELD_PREP(LPI_THRESH_MASK, x) |
| #define LPI_MODE_EN BIT(0) |
| |
| #define MT7530_PMSR_P(x) (0x3008 + (x) * 0x100) |
| #define PMSR_EEE1G BIT(7) |
| #define PMSR_EEE100M BIT(6) |
| #define PMSR_RX_FC BIT(5) |
| #define PMSR_TX_FC BIT(4) |
| #define PMSR_SPEED_1000 BIT(3) |
| #define PMSR_SPEED_100 BIT(2) |
| #define PMSR_SPEED_10 0x00 |
| #define PMSR_SPEED_MASK (PMSR_SPEED_100 | PMSR_SPEED_1000) |
| #define PMSR_DPX BIT(1) |
| #define PMSR_LINK BIT(0) |
| |
| /* Register for port debug count */ |
| #define MT7531_DBG_CNT(x) (0x3018 + (x) * 0x100) |
| #define MT7531_DIS_CLR BIT(31) |
| |
| #define MT7530_GMACCR 0x30e0 |
| #define MAX_RX_JUMBO(x) ((x) << 2) |
| #define MAX_RX_JUMBO_MASK GENMASK(5, 2) |
| #define MAX_RX_PKT_LEN_MASK GENMASK(1, 0) |
| #define MAX_RX_PKT_LEN_1522 0x0 |
| #define MAX_RX_PKT_LEN_1536 0x1 |
| #define MAX_RX_PKT_LEN_1552 0x2 |
| #define MAX_RX_PKT_LEN_JUMBO 0x3 |
| |
| /* Register for MIB */ |
| #define MT7530_PORT_MIB_COUNTER(x) (0x4000 + (x) * 0x100) |
| #define MT7530_MIB_CCR 0x4fe0 |
| #define CCR_MIB_ENABLE BIT(31) |
| #define CCR_RX_OCT_CNT_GOOD BIT(7) |
| #define CCR_RX_OCT_CNT_BAD BIT(6) |
| #define CCR_TX_OCT_CNT_GOOD BIT(5) |
| #define CCR_TX_OCT_CNT_BAD BIT(4) |
| #define CCR_MIB_FLUSH (CCR_RX_OCT_CNT_GOOD | \ |
| CCR_RX_OCT_CNT_BAD | \ |
| CCR_TX_OCT_CNT_GOOD | \ |
| CCR_TX_OCT_CNT_BAD) |
| #define CCR_MIB_ACTIVATE (CCR_MIB_ENABLE | \ |
| CCR_RX_OCT_CNT_GOOD | \ |
| CCR_RX_OCT_CNT_BAD | \ |
| CCR_TX_OCT_CNT_GOOD | \ |
| CCR_TX_OCT_CNT_BAD) |
| |
| /* MT7531 SGMII register group */ |
| #define MT7531_SGMII_REG_BASE(p) (0x5000 + ((p) - 5) * 0x1000) |
| #define MT7531_PHYA_CTRL_SIGNAL3 0x128 |
| |
| /* Register for system reset */ |
| #define MT7530_SYS_CTRL 0x7000 |
| #define SYS_CTRL_PHY_RST BIT(2) |
| #define SYS_CTRL_SW_RST BIT(1) |
| #define SYS_CTRL_REG_RST BIT(0) |
| |
| /* Register for system interrupt */ |
| #define MT7530_SYS_INT_EN 0x7008 |
| |
| /* Register for system interrupt status */ |
| #define MT7530_SYS_INT_STS 0x700c |
| |
| /* Register for PHY Indirect Access Control */ |
| #define MT7531_PHY_IAC 0x701C |
| #define MT7531_PHY_ACS_ST BIT(31) |
| #define MT7531_MDIO_REG_ADDR_MASK (0x1f << 25) |
| #define MT7531_MDIO_PHY_ADDR_MASK (0x1f << 20) |
| #define MT7531_MDIO_CMD_MASK (0x3 << 18) |
| #define MT7531_MDIO_ST_MASK (0x3 << 16) |
| #define MT7531_MDIO_RW_DATA_MASK (0xffff) |
| #define MT7531_MDIO_REG_ADDR(x) (((x) & 0x1f) << 25) |
| #define MT7531_MDIO_DEV_ADDR(x) (((x) & 0x1f) << 25) |
| #define MT7531_MDIO_PHY_ADDR(x) (((x) & 0x1f) << 20) |
| #define MT7531_MDIO_CMD(x) (((x) & 0x3) << 18) |
| #define MT7531_MDIO_ST(x) (((x) & 0x3) << 16) |
| |
| enum mt7531_phy_iac_cmd { |
| MT7531_MDIO_ADDR = 0, |
| MT7531_MDIO_WRITE = 1, |
| MT7531_MDIO_READ = 2, |
| MT7531_MDIO_READ_CL45 = 3, |
| }; |
| |
| /* MDIO_ST: MDIO start field */ |
| enum mt7531_mdio_st { |
| MT7531_MDIO_ST_CL45 = 0, |
| MT7531_MDIO_ST_CL22 = 1, |
| }; |
| |
| #define MT7531_MDIO_CL22_READ (MT7531_MDIO_ST(MT7531_MDIO_ST_CL22) | \ |
| MT7531_MDIO_CMD(MT7531_MDIO_READ)) |
| #define MT7531_MDIO_CL22_WRITE (MT7531_MDIO_ST(MT7531_MDIO_ST_CL22) | \ |
| MT7531_MDIO_CMD(MT7531_MDIO_WRITE)) |
| #define MT7531_MDIO_CL45_ADDR (MT7531_MDIO_ST(MT7531_MDIO_ST_CL45) | \ |
| MT7531_MDIO_CMD(MT7531_MDIO_ADDR)) |
| #define MT7531_MDIO_CL45_READ (MT7531_MDIO_ST(MT7531_MDIO_ST_CL45) | \ |
| MT7531_MDIO_CMD(MT7531_MDIO_READ)) |
| #define MT7531_MDIO_CL45_WRITE (MT7531_MDIO_ST(MT7531_MDIO_ST_CL45) | \ |
| MT7531_MDIO_CMD(MT7531_MDIO_WRITE)) |
| |
| /* Register for RGMII clock phase */ |
| #define MT7531_CLKGEN_CTRL 0x7500 |
| #define CLK_SKEW_OUT(x) (((x) & 0x3) << 8) |
| #define CLK_SKEW_OUT_MASK GENMASK(9, 8) |
| #define CLK_SKEW_IN(x) (((x) & 0x3) << 6) |
| #define CLK_SKEW_IN_MASK GENMASK(7, 6) |
| #define RXCLK_NO_DELAY BIT(5) |
| #define TXCLK_NO_REVERSE BIT(4) |
| #define GP_MODE(x) (((x) & 0x3) << 1) |
| #define GP_MODE_MASK GENMASK(2, 1) |
| #define GP_CLK_EN BIT(0) |
| |
| enum mt7531_gp_mode { |
| MT7531_GP_MODE_RGMII = 0, |
| MT7531_GP_MODE_MII = 1, |
| MT7531_GP_MODE_REV_MII = 2 |
| }; |
| |
| enum mt7531_clk_skew { |
| MT7531_CLK_SKEW_NO_CHG = 0, |
| MT7531_CLK_SKEW_DLY_100PPS = 1, |
| MT7531_CLK_SKEW_DLY_200PPS = 2, |
| MT7531_CLK_SKEW_REVERSE = 3, |
| }; |
| |
| /* Register for trap status */ |
| #define MT753X_TRAP 0x7800 |
| #define MT7530_XTAL_MASK (BIT(10) | BIT(9)) |
| #define MT7530_XTAL_25MHZ (BIT(10) | BIT(9)) |
| #define MT7530_XTAL_40MHZ BIT(10) |
| #define MT7530_XTAL_20MHZ BIT(9) |
| #define MT7531_XTAL25 BIT(7) |
| |
| /* Register for trap modification */ |
| #define MT753X_MTRAP 0x7804 |
| #define MT7530_P5_PHY0_SEL BIT(20) |
| #define MT7530_CHG_TRAP BIT(16) |
| #define MT7530_P5_MAC_SEL BIT(13) |
| #define MT7530_P6_DIS BIT(8) |
| #define MT7530_P5_RGMII_MODE BIT(7) |
| #define MT7530_P5_DIS BIT(6) |
| #define MT7530_PHY_INDIRECT_ACCESS BIT(5) |
| #define MT7531_CHG_STRAP BIT(8) |
| #define MT7531_PHY_EN BIT(6) |
| |
| enum mt7531_xtal_fsel { |
| MT7531_XTAL_FSEL_25MHZ, |
| MT7531_XTAL_FSEL_40MHZ, |
| }; |
| |
| /* Register for TOP signal control */ |
| #define MT7530_TOP_SIG_CTRL 0x7808 |
| #define TOP_SIG_CTRL_NORMAL (BIT(17) | BIT(16)) |
| |
| #define MT7531_TOP_SIG_SR 0x780c |
| #define PAD_DUAL_SGMII_EN BIT(1) |
| #define PAD_MCM_SMI_EN BIT(0) |
| |
| #define MT7530_IO_DRV_CR 0x7810 |
| #define P5_IO_CLK_DRV(x) ((x) & 0x3) |
| #define P5_IO_DATA_DRV(x) (((x) & 0x3) << 4) |
| |
| #define MT7531_CHIP_REV 0x781C |
| |
| #define MT7531_PLLGP_EN 0x7820 |
| #define EN_COREPLL BIT(2) |
| #define SW_CLKSW BIT(1) |
| #define SW_PLLGP BIT(0) |
| |
| #define MT7530_P6ECR 0x7830 |
| #define P6_INTF_MODE_MASK 0x3 |
| #define P6_INTF_MODE(x) ((x) & 0x3) |
| |
| #define MT7531_PLLGP_CR0 0x78a8 |
| #define RG_COREPLL_EN BIT(22) |
| #define RG_COREPLL_POSDIV_S 23 |
| #define RG_COREPLL_POSDIV_M 0x3800000 |
| #define RG_COREPLL_SDM_PCW_S 1 |
| #define RG_COREPLL_SDM_PCW_M 0x3ffffe |
| #define RG_COREPLL_SDM_PCW_CHG BIT(0) |
| |
| /* Registers for RGMII and SGMII PLL clock */ |
| #define MT7531_ANA_PLLGP_CR2 0x78b0 |
| #define MT7531_ANA_PLLGP_CR5 0x78bc |
| |
| /* Registers for TRGMII on the both side */ |
| #define MT7530_TRGMII_RCK_CTRL 0x7a00 |
| #define RX_RST BIT(31) |
| #define RXC_DQSISEL BIT(30) |
| #define DQSI1_TAP_MASK (0x7f << 8) |
| #define DQSI0_TAP_MASK 0x7f |
| #define DQSI1_TAP(x) (((x) & 0x7f) << 8) |
| #define DQSI0_TAP(x) ((x) & 0x7f) |
| |
| #define MT7530_TRGMII_RCK_RTT 0x7a04 |
| #define DQS1_GATE BIT(31) |
| #define DQS0_GATE BIT(30) |
| |
| #define MT7530_TRGMII_RD(x) (0x7a10 + (x) * 8) |
| #define BSLIP_EN BIT(31) |
| #define EDGE_CHK BIT(30) |
| #define RD_TAP_MASK 0x7f |
| #define RD_TAP(x) ((x) & 0x7f) |
| |
| #define MT7530_TRGMII_TXCTRL 0x7a40 |
| #define TRAIN_TXEN BIT(31) |
| #define TXC_INV BIT(30) |
| #define TX_RST BIT(28) |
| |
| #define MT7530_TRGMII_TD_ODT(i) (0x7a54 + 8 * (i)) |
| #define TD_DM_DRVP(x) ((x) & 0xf) |
| #define TD_DM_DRVN(x) (((x) & 0xf) << 4) |
| |
| #define MT7530_TRGMII_TCK_CTRL 0x7a78 |
| #define TCK_TAP(x) (((x) & 0xf) << 8) |
| |
| #define MT7530_P5RGMIIRXCR 0x7b00 |
| #define CSR_RGMII_EDGE_ALIGN BIT(8) |
| #define CSR_RGMII_RXC_0DEG_CFG(x) ((x) & 0xf) |
| |
| #define MT7530_P5RGMIITXCR 0x7b04 |
| #define CSR_RGMII_TXC_CFG(x) ((x) & 0x1f) |
| |
| /* Registers for GPIO mode */ |
| #define MT7531_GPIO_MODE0 0x7c0c |
| #define MT7531_GPIO0_MASK GENMASK(3, 0) |
| #define MT7531_GPIO0_INTERRUPT 1 |
| |
| #define MT7531_GPIO_MODE1 0x7c10 |
| #define MT7531_GPIO11_RG_RXD2_MASK GENMASK(15, 12) |
| #define MT7531_EXT_P_MDC_11 (2 << 12) |
| #define MT7531_GPIO12_RG_RXD3_MASK GENMASK(19, 16) |
| #define MT7531_EXT_P_MDIO_12 (2 << 16) |
| |
| /* Registers for LED GPIO control (MT7530 only) |
| * All registers follow this pattern: |
| * [ 2: 0] port 0 |
| * [ 6: 4] port 1 |
| * [10: 8] port 2 |
| * [14:12] port 3 |
| * [18:16] port 4 |
| */ |
| |
| /* LED enable, 0: Disable, 1: Enable (Default) */ |
| #define MT7530_LED_EN 0x7d00 |
| /* LED mode, 0: GPIO mode, 1: PHY mode (Default) */ |
| #define MT7530_LED_IO_MODE 0x7d04 |
| /* GPIO direction, 0: Input, 1: Output */ |
| #define MT7530_LED_GPIO_DIR 0x7d10 |
| /* GPIO output enable, 0: Disable, 1: Enable */ |
| #define MT7530_LED_GPIO_OE 0x7d14 |
| /* GPIO value, 0: Low, 1: High */ |
| #define MT7530_LED_GPIO_DATA 0x7d18 |
| |
| #define MT7530_CREV 0x7ffc |
| #define CHIP_NAME_SHIFT 16 |
| #define MT7530_ID 0x7530 |
| |
| #define MT7531_CREV 0x781C |
| #define CHIP_REV_M 0x0f |
| #define MT7531_ID 0x7531 |
| |
| /* Registers for core PLL access through mmd indirect */ |
| #define CORE_PLL_GROUP2 0x401 |
| #define RG_SYSPLL_EN_NORMAL BIT(15) |
| #define RG_SYSPLL_VODEN BIT(14) |
| #define RG_SYSPLL_LF BIT(13) |
| #define RG_SYSPLL_RST_DLY(x) (((x) & 0x3) << 12) |
| #define RG_SYSPLL_LVROD_EN BIT(10) |
| #define RG_SYSPLL_PREDIV(x) (((x) & 0x3) << 8) |
| #define RG_SYSPLL_POSDIV(x) (((x) & 0x3) << 5) |
| #define RG_SYSPLL_FBKSEL BIT(4) |
| #define RT_SYSPLL_EN_AFE_OLT BIT(0) |
| |
| #define CORE_PLL_GROUP4 0x403 |
| #define RG_SYSPLL_DDSFBK_EN BIT(12) |
| #define RG_SYSPLL_BIAS_EN BIT(11) |
| #define RG_SYSPLL_BIAS_LPF_EN BIT(10) |
| #define MT7531_RG_SYSPLL_DMY2 BIT(6) |
| #define MT7531_PHY_PLL_OFF BIT(5) |
| #define MT7531_PHY_PLL_BYPASS_MODE BIT(4) |
| |
| #define MT753X_CTRL_PHY_ADDR(addr) ((addr + 1) & 0x1f) |
| |
| #define CORE_PLL_GROUP5 0x404 |
| #define RG_LCDDS_PCW_NCPO1(x) ((x) & 0xffff) |
| |
| #define CORE_PLL_GROUP6 0x405 |
| #define RG_LCDDS_PCW_NCPO0(x) ((x) & 0xffff) |
| |
| #define CORE_PLL_GROUP7 0x406 |
| #define RG_LCDDS_PWDB BIT(15) |
| #define RG_LCDDS_ISO_EN BIT(13) |
| #define RG_LCCDS_C(x) (((x) & 0x7) << 4) |
| #define RG_LCDDS_PCW_NCPO_CHG BIT(3) |
| |
| #define CORE_PLL_GROUP10 0x409 |
| #define RG_LCDDS_SSC_DELTA(x) ((x) & 0xfff) |
| |
| #define CORE_PLL_GROUP11 0x40a |
| #define RG_LCDDS_SSC_DELTA1(x) ((x) & 0xfff) |
| |
| #define CORE_GSWPLL_GRP1 0x40d |
| #define RG_GSWPLL_PREDIV(x) (((x) & 0x3) << 14) |
| #define RG_GSWPLL_POSDIV_200M(x) (((x) & 0x3) << 12) |
| #define RG_GSWPLL_EN_PRE BIT(11) |
| #define RG_GSWPLL_FBKSEL BIT(10) |
| #define RG_GSWPLL_BP BIT(9) |
| #define RG_GSWPLL_BR BIT(8) |
| #define RG_GSWPLL_FBKDIV_200M(x) ((x) & 0xff) |
| |
| #define CORE_GSWPLL_GRP2 0x40e |
| #define RG_GSWPLL_POSDIV_500M(x) (((x) & 0x3) << 8) |
| #define RG_GSWPLL_FBKDIV_500M(x) ((x) & 0xff) |
| |
| #define CORE_TRGMII_GSW_CLK_CG 0x410 |
| #define REG_GSWCK_EN BIT(0) |
| #define REG_TRGMIICK_EN BIT(1) |
| |
| #define MIB_DESC(_s, _o, _n) \ |
| { \ |
| .size = (_s), \ |
| .offset = (_o), \ |
| .name = (_n), \ |
| } |
| |
| struct mt7530_mib_desc { |
| unsigned int size; |
| unsigned int offset; |
| const char *name; |
| }; |
| |
| struct mt7530_fdb { |
| u16 vid; |
| u8 port_mask; |
| u8 aging; |
| u8 mac[6]; |
| bool noarp; |
| }; |
| |
| /* struct mt7530_port - This is the main data structure for holding the state |
| * of the port. |
| * @enable: The status used for show port is enabled or not. |
| * @pm: The matrix used to show all connections with the port. |
| * @pvid: The VLAN specified is to be considered a PVID at ingress. Any |
| * untagged frames will be assigned to the related VLAN. |
| * @sgmii_pcs: Pointer to PCS instance for SerDes ports |
| */ |
| struct mt7530_port { |
| bool enable; |
| bool isolated; |
| u32 pm; |
| u16 pvid; |
| struct phylink_pcs *sgmii_pcs; |
| }; |
| |
| /* Port 5 mode definitions of the MT7530 switch */ |
| enum mt7530_p5_mode { |
| GMAC5, |
| MUX_PHY_P0, |
| MUX_PHY_P4, |
| }; |
| |
| struct mt7530_priv; |
| |
| struct mt753x_pcs { |
| struct phylink_pcs pcs; |
| struct mt7530_priv *priv; |
| int port; |
| }; |
| |
| /* struct mt753x_info - This is the main data structure for holding the specific |
| * part for each supported device |
| * @id: Holding the identifier to a switch model |
| * @pcs_ops: Holding the pointer to the MAC PCS operations structure |
| * @sw_setup: Holding the handler to a device initialization |
| * @phy_read_c22: Holding the way reading PHY port using C22 |
| * @phy_write_c22: Holding the way writing PHY port using C22 |
| * @phy_read_c45: Holding the way reading PHY port using C45 |
| * @phy_write_c45: Holding the way writing PHY port using C45 |
| * @mac_port_get_caps: Holding the handler that provides MAC capabilities |
| * @mac_port_config: Holding the way setting up the PHY attribute to a |
| * certain MAC port |
| */ |
| struct mt753x_info { |
| enum mt753x_id id; |
| |
| const struct phylink_pcs_ops *pcs_ops; |
| |
| int (*sw_setup)(struct dsa_switch *ds); |
| int (*phy_read_c22)(struct mt7530_priv *priv, int port, int regnum); |
| int (*phy_write_c22)(struct mt7530_priv *priv, int port, int regnum, |
| u16 val); |
| int (*phy_read_c45)(struct mt7530_priv *priv, int port, int devad, |
| int regnum); |
| int (*phy_write_c45)(struct mt7530_priv *priv, int port, int devad, |
| int regnum, u16 val); |
| void (*mac_port_get_caps)(struct dsa_switch *ds, int port, |
| struct phylink_config *config); |
| void (*mac_port_config)(struct dsa_switch *ds, int port, |
| unsigned int mode, |
| phy_interface_t interface); |
| }; |
| |
| /* struct mt7530_priv - This is the main data structure for holding the state |
| * of the driver |
| * @dev: The device pointer |
| * @ds: The pointer to the dsa core structure |
| * @bus: The bus used for the device and built-in PHY |
| * @regmap: The regmap instance representing all switch registers |
| * @rstc: The pointer to reset control used by MCM |
| * @core_pwr: The power supplied into the core |
| * @io_pwr: The power supplied into the I/O |
| * @reset: The descriptor for GPIO line tied to its reset pin |
| * @mcm: Flag for distinguishing if standalone IC or module |
| * coupling |
| * @ports: Holding the state among ports |
| * @reg_mutex: The lock for protecting among process accessing |
| * registers |
| * @p5_mode: Holding the current mode of port 5 of the MT7530 switch |
| * @p5_sgmii: Flag for distinguishing if port 5 of the MT7531 switch |
| * has got SGMII |
| * @irq: IRQ number of the switch |
| * @irq_domain: IRQ domain of the switch irq_chip |
| * @irq_enable: IRQ enable bits, synced to SYS_INT_EN |
| * @create_sgmii: Pointer to function creating SGMII PCS instance(s) |
| * @active_cpu_ports: Holding the active CPU ports |
| * @mdiodev: The pointer to the MDIO device structure |
| */ |
| struct mt7530_priv { |
| struct device *dev; |
| struct dsa_switch *ds; |
| struct mii_bus *bus; |
| struct regmap *regmap; |
| struct reset_control *rstc; |
| struct regulator *core_pwr; |
| struct regulator *io_pwr; |
| struct gpio_desc *reset; |
| const struct mt753x_info *info; |
| unsigned int id; |
| bool mcm; |
| enum mt7530_p5_mode p5_mode; |
| bool p5_sgmii; |
| u8 mirror_rx; |
| u8 mirror_tx; |
| struct mt7530_port ports[MT7530_NUM_PORTS]; |
| struct mt753x_pcs pcs[MT7530_NUM_PORTS]; |
| /* protect among processes for registers access*/ |
| struct mutex reg_mutex; |
| int irq; |
| struct irq_domain *irq_domain; |
| u32 irq_enable; |
| int (*create_sgmii)(struct mt7530_priv *priv); |
| u8 active_cpu_ports; |
| struct mdio_device *mdiodev; |
| }; |
| |
| struct mt7530_hw_vlan_entry { |
| int port; |
| u8 old_members; |
| bool untagged; |
| }; |
| |
| static inline void mt7530_hw_vlan_entry_init(struct mt7530_hw_vlan_entry *e, |
| int port, bool untagged) |
| { |
| e->port = port; |
| e->untagged = untagged; |
| } |
| |
| typedef void (*mt7530_vlan_op)(struct mt7530_priv *, |
| struct mt7530_hw_vlan_entry *); |
| |
| struct mt7530_hw_stats { |
| const char *string; |
| u16 reg; |
| u8 sizeof_stat; |
| }; |
| |
| struct mt7530_dummy_poll { |
| struct mt7530_priv *priv; |
| u32 reg; |
| }; |
| |
| static inline void INIT_MT7530_DUMMY_POLL(struct mt7530_dummy_poll *p, |
| struct mt7530_priv *priv, u32 reg) |
| { |
| p->priv = priv; |
| p->reg = reg; |
| } |
| |
| int mt7530_probe_common(struct mt7530_priv *priv); |
| void mt7530_remove_common(struct mt7530_priv *priv); |
| |
| extern const struct dsa_switch_ops mt7530_switch_ops; |
| extern const struct mt753x_info mt753x_table[]; |
| |
| #endif /* __MT7530_H */ |