| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| /* |
| * Driver for the MDIO interface of Microsemi network switches. |
| * |
| * Author: Alexandre Belloni <alexandre.belloni@bootlin.com> |
| * Copyright (c) 2017 Microsemi Corporation |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/kernel.h> |
| #include <linux/mdio/mdio-mscc-miim.h> |
| #include <linux/mfd/ocelot.h> |
| #include <linux/module.h> |
| #include <linux/of_mdio.h> |
| #include <linux/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/property.h> |
| #include <linux/regmap.h> |
| #include <linux/reset.h> |
| |
| #define MSCC_MIIM_REG_STATUS 0x0 |
| #define MSCC_MIIM_STATUS_STAT_PENDING BIT(2) |
| #define MSCC_MIIM_STATUS_STAT_BUSY BIT(3) |
| #define MSCC_MIIM_REG_CMD 0x8 |
| #define MSCC_MIIM_CMD_OPR_WRITE BIT(1) |
| #define MSCC_MIIM_CMD_OPR_READ BIT(2) |
| #define MSCC_MIIM_CMD_WRDATA_SHIFT 4 |
| #define MSCC_MIIM_CMD_REGAD_SHIFT 20 |
| #define MSCC_MIIM_CMD_PHYAD_SHIFT 25 |
| #define MSCC_MIIM_CMD_VLD BIT(31) |
| #define MSCC_MIIM_REG_DATA 0xC |
| #define MSCC_MIIM_DATA_ERROR (BIT(16) | BIT(17)) |
| #define MSCC_MIIM_REG_CFG 0x10 |
| #define MSCC_MIIM_CFG_PRESCALE_MASK GENMASK(7, 0) |
| |
| #define MSCC_PHY_REG_PHY_CFG 0x0 |
| #define PHY_CFG_PHY_ENA (BIT(0) | BIT(1) | BIT(2) | BIT(3)) |
| #define PHY_CFG_PHY_COMMON_RESET BIT(4) |
| #define PHY_CFG_PHY_RESET (BIT(5) | BIT(6) | BIT(7) | BIT(8)) |
| #define MSCC_PHY_REG_PHY_STATUS 0x4 |
| |
| #define LAN966X_CUPHY_COMMON_CFG 0x0 |
| #define CUPHY_COMMON_CFG_RESET_N BIT(0) |
| |
| struct mscc_miim_info { |
| unsigned int phy_reset_offset; |
| unsigned int phy_reset_bits; |
| }; |
| |
| struct mscc_miim_dev { |
| struct regmap *regs; |
| int mii_status_offset; |
| bool ignore_read_errors; |
| struct regmap *phy_regs; |
| const struct mscc_miim_info *info; |
| struct clk *clk; |
| u32 bus_freq; |
| }; |
| |
| /* When high resolution timers aren't built-in: we can't use usleep_range() as |
| * we would sleep way too long. Use udelay() instead. |
| */ |
| #define mscc_readx_poll_timeout(op, addr, val, cond, delay_us, timeout_us)\ |
| ({ \ |
| if (!IS_ENABLED(CONFIG_HIGH_RES_TIMERS)) \ |
| readx_poll_timeout_atomic(op, addr, val, cond, delay_us, \ |
| timeout_us); \ |
| readx_poll_timeout(op, addr, val, cond, delay_us, timeout_us); \ |
| }) |
| |
| static int mscc_miim_status(struct mii_bus *bus) |
| { |
| struct mscc_miim_dev *miim = bus->priv; |
| int val, ret; |
| |
| ret = regmap_read(miim->regs, |
| MSCC_MIIM_REG_STATUS + miim->mii_status_offset, &val); |
| if (ret < 0) { |
| WARN_ONCE(1, "mscc miim status read error %d\n", ret); |
| return ret; |
| } |
| |
| return val; |
| } |
| |
| static int mscc_miim_wait_ready(struct mii_bus *bus) |
| { |
| u32 val; |
| |
| return mscc_readx_poll_timeout(mscc_miim_status, bus, val, |
| !(val & MSCC_MIIM_STATUS_STAT_BUSY), 50, |
| 10000); |
| } |
| |
| static int mscc_miim_wait_pending(struct mii_bus *bus) |
| { |
| u32 val; |
| |
| return mscc_readx_poll_timeout(mscc_miim_status, bus, val, |
| !(val & MSCC_MIIM_STATUS_STAT_PENDING), |
| 50, 10000); |
| } |
| |
| static int mscc_miim_read(struct mii_bus *bus, int mii_id, int regnum) |
| { |
| struct mscc_miim_dev *miim = bus->priv; |
| u32 val; |
| int ret; |
| |
| ret = mscc_miim_wait_pending(bus); |
| if (ret) |
| goto out; |
| |
| ret = regmap_write(miim->regs, |
| MSCC_MIIM_REG_CMD + miim->mii_status_offset, |
| MSCC_MIIM_CMD_VLD | |
| (mii_id << MSCC_MIIM_CMD_PHYAD_SHIFT) | |
| (regnum << MSCC_MIIM_CMD_REGAD_SHIFT) | |
| MSCC_MIIM_CMD_OPR_READ); |
| |
| if (ret < 0) { |
| WARN_ONCE(1, "mscc miim write cmd reg error %d\n", ret); |
| goto out; |
| } |
| |
| ret = mscc_miim_wait_ready(bus); |
| if (ret) |
| goto out; |
| |
| ret = regmap_read(miim->regs, |
| MSCC_MIIM_REG_DATA + miim->mii_status_offset, &val); |
| if (ret < 0) { |
| WARN_ONCE(1, "mscc miim read data reg error %d\n", ret); |
| goto out; |
| } |
| |
| if (!miim->ignore_read_errors && !!(val & MSCC_MIIM_DATA_ERROR)) { |
| ret = -EIO; |
| goto out; |
| } |
| |
| ret = val & 0xFFFF; |
| out: |
| return ret; |
| } |
| |
| static int mscc_miim_write(struct mii_bus *bus, int mii_id, |
| int regnum, u16 value) |
| { |
| struct mscc_miim_dev *miim = bus->priv; |
| int ret; |
| |
| ret = mscc_miim_wait_pending(bus); |
| if (ret < 0) |
| goto out; |
| |
| ret = regmap_write(miim->regs, |
| MSCC_MIIM_REG_CMD + miim->mii_status_offset, |
| MSCC_MIIM_CMD_VLD | |
| (mii_id << MSCC_MIIM_CMD_PHYAD_SHIFT) | |
| (regnum << MSCC_MIIM_CMD_REGAD_SHIFT) | |
| (value << MSCC_MIIM_CMD_WRDATA_SHIFT) | |
| MSCC_MIIM_CMD_OPR_WRITE); |
| |
| if (ret < 0) |
| WARN_ONCE(1, "mscc miim write error %d\n", ret); |
| out: |
| return ret; |
| } |
| |
| static int mscc_miim_reset(struct mii_bus *bus) |
| { |
| struct mscc_miim_dev *miim = bus->priv; |
| unsigned int offset, bits; |
| int ret; |
| |
| if (!miim->phy_regs) |
| return 0; |
| |
| offset = miim->info->phy_reset_offset; |
| bits = miim->info->phy_reset_bits; |
| |
| ret = regmap_update_bits(miim->phy_regs, offset, bits, 0); |
| if (ret < 0) { |
| WARN_ONCE(1, "mscc reset set error %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_update_bits(miim->phy_regs, offset, bits, bits); |
| if (ret < 0) { |
| WARN_ONCE(1, "mscc reset clear error %d\n", ret); |
| return ret; |
| } |
| |
| mdelay(500); |
| |
| return 0; |
| } |
| |
| static const struct regmap_config mscc_miim_regmap_config = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| }; |
| |
| static const struct regmap_config mscc_miim_phy_regmap_config = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| .name = "phy", |
| }; |
| |
| int mscc_miim_setup(struct device *dev, struct mii_bus **pbus, const char *name, |
| struct regmap *mii_regmap, int status_offset, |
| bool ignore_read_errors) |
| { |
| struct mscc_miim_dev *miim; |
| struct mii_bus *bus; |
| |
| bus = devm_mdiobus_alloc_size(dev, sizeof(*miim)); |
| if (!bus) |
| return -ENOMEM; |
| |
| bus->name = name; |
| bus->read = mscc_miim_read; |
| bus->write = mscc_miim_write; |
| bus->reset = mscc_miim_reset; |
| snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(dev)); |
| bus->parent = dev; |
| |
| miim = bus->priv; |
| |
| *pbus = bus; |
| |
| miim->regs = mii_regmap; |
| miim->mii_status_offset = status_offset; |
| miim->ignore_read_errors = ignore_read_errors; |
| |
| *pbus = bus; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(mscc_miim_setup); |
| |
| static int mscc_miim_clk_set(struct mii_bus *bus) |
| { |
| struct mscc_miim_dev *miim = bus->priv; |
| unsigned long rate; |
| u32 div; |
| |
| /* Keep the current settings */ |
| if (!miim->bus_freq) |
| return 0; |
| |
| rate = clk_get_rate(miim->clk); |
| |
| div = DIV_ROUND_UP(rate, 2 * miim->bus_freq) - 1; |
| if (div == 0 || div & ~MSCC_MIIM_CFG_PRESCALE_MASK) { |
| dev_err(&bus->dev, "Incorrect MDIO clock frequency\n"); |
| return -EINVAL; |
| } |
| |
| return regmap_update_bits(miim->regs, MSCC_MIIM_REG_CFG, |
| MSCC_MIIM_CFG_PRESCALE_MASK, div); |
| } |
| |
| static int mscc_miim_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct regmap *mii_regmap, *phy_regmap; |
| struct device *dev = &pdev->dev; |
| struct reset_control *reset; |
| struct mscc_miim_dev *miim; |
| struct mii_bus *bus; |
| int ret; |
| |
| reset = devm_reset_control_get_optional_shared(dev, "switch"); |
| if (IS_ERR(reset)) |
| return dev_err_probe(dev, PTR_ERR(reset), "Failed to get reset\n"); |
| |
| reset_control_reset(reset); |
| |
| mii_regmap = ocelot_regmap_from_resource(pdev, 0, |
| &mscc_miim_regmap_config); |
| if (IS_ERR(mii_regmap)) |
| return dev_err_probe(dev, PTR_ERR(mii_regmap), |
| "Unable to create MIIM regmap\n"); |
| |
| /* This resource is optional */ |
| phy_regmap = ocelot_regmap_from_resource_optional(pdev, 1, |
| &mscc_miim_phy_regmap_config); |
| if (IS_ERR(phy_regmap)) |
| return dev_err_probe(dev, PTR_ERR(phy_regmap), |
| "Unable to create phy register regmap\n"); |
| |
| ret = mscc_miim_setup(dev, &bus, "mscc_miim", mii_regmap, 0, false); |
| if (ret < 0) { |
| dev_err(dev, "Unable to setup the MDIO bus\n"); |
| return ret; |
| } |
| |
| miim = bus->priv; |
| miim->phy_regs = phy_regmap; |
| |
| miim->info = device_get_match_data(dev); |
| if (!miim->info) |
| return -EINVAL; |
| |
| miim->clk = devm_clk_get_optional(dev, NULL); |
| if (IS_ERR(miim->clk)) |
| return PTR_ERR(miim->clk); |
| |
| of_property_read_u32(np, "clock-frequency", &miim->bus_freq); |
| |
| if (miim->bus_freq && !miim->clk) { |
| dev_err(dev, "cannot use clock-frequency without a clock\n"); |
| return -EINVAL; |
| } |
| |
| ret = clk_prepare_enable(miim->clk); |
| if (ret) |
| return ret; |
| |
| ret = mscc_miim_clk_set(bus); |
| if (ret) |
| goto out_disable_clk; |
| |
| ret = of_mdiobus_register(bus, np); |
| if (ret < 0) { |
| dev_err(dev, "Cannot register MDIO bus (%d)\n", ret); |
| goto out_disable_clk; |
| } |
| |
| platform_set_drvdata(pdev, bus); |
| |
| return 0; |
| |
| out_disable_clk: |
| clk_disable_unprepare(miim->clk); |
| return ret; |
| } |
| |
| static void mscc_miim_remove(struct platform_device *pdev) |
| { |
| struct mii_bus *bus = platform_get_drvdata(pdev); |
| struct mscc_miim_dev *miim = bus->priv; |
| |
| clk_disable_unprepare(miim->clk); |
| mdiobus_unregister(bus); |
| } |
| |
| static const struct mscc_miim_info mscc_ocelot_miim_info = { |
| .phy_reset_offset = MSCC_PHY_REG_PHY_CFG, |
| .phy_reset_bits = PHY_CFG_PHY_ENA | PHY_CFG_PHY_COMMON_RESET | |
| PHY_CFG_PHY_RESET, |
| }; |
| |
| static const struct mscc_miim_info microchip_lan966x_miim_info = { |
| .phy_reset_offset = LAN966X_CUPHY_COMMON_CFG, |
| .phy_reset_bits = CUPHY_COMMON_CFG_RESET_N, |
| }; |
| |
| static const struct of_device_id mscc_miim_match[] = { |
| { |
| .compatible = "mscc,ocelot-miim", |
| .data = &mscc_ocelot_miim_info |
| }, { |
| .compatible = "microchip,lan966x-miim", |
| .data = µchip_lan966x_miim_info |
| }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, mscc_miim_match); |
| |
| static struct platform_driver mscc_miim_driver = { |
| .probe = mscc_miim_probe, |
| .remove_new = mscc_miim_remove, |
| .driver = { |
| .name = "mscc-miim", |
| .of_match_table = mscc_miim_match, |
| }, |
| }; |
| |
| module_platform_driver(mscc_miim_driver); |
| |
| MODULE_DESCRIPTION("Microsemi MIIM driver"); |
| MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>"); |
| MODULE_LICENSE("Dual MIT/GPL"); |