| // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause |
| /* Copyright(c) 2023 Realtek Corporation |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| |
| #include "pci.h" |
| #include "reg.h" |
| #include "rtw8922a.h" |
| |
| static const struct rtw89_pci_info rtw8922a_pci_info = { |
| .gen_def = &rtw89_pci_gen_be, |
| .txbd_trunc_mode = MAC_AX_BD_TRUNC, |
| .rxbd_trunc_mode = MAC_AX_BD_TRUNC, |
| .rxbd_mode = MAC_AX_RXBD_PKT, |
| .tag_mode = MAC_AX_TAG_MULTI, |
| .tx_burst = MAC_AX_TX_BURST_V1_256B, |
| .rx_burst = MAC_AX_RX_BURST_V1_128B, |
| .wd_dma_idle_intvl = MAC_AX_WD_DMA_INTVL_256NS, |
| .wd_dma_act_intvl = MAC_AX_WD_DMA_INTVL_256NS, |
| .multi_tag_num = MAC_AX_TAG_NUM_8, |
| .lbc_en = MAC_AX_PCIE_ENABLE, |
| .lbc_tmr = MAC_AX_LBC_TMR_2MS, |
| .autok_en = MAC_AX_PCIE_DISABLE, |
| .io_rcy_en = MAC_AX_PCIE_ENABLE, |
| .io_rcy_tmr = MAC_AX_IO_RCY_ANA_TMR_DEF, |
| .rx_ring_eq_is_full = true, |
| .check_rx_tag = true, |
| |
| .init_cfg_reg = R_BE_HAXI_INIT_CFG1, |
| .txhci_en_bit = B_BE_TXDMA_EN, |
| .rxhci_en_bit = B_BE_RXDMA_EN, |
| .rxbd_mode_bit = B_BE_RXQ_RXBD_MODE_MASK, |
| .exp_ctrl_reg = R_BE_HAXI_EXP_CTRL_V1, |
| .max_tag_num_mask = B_BE_MAX_TAG_NUM_MASK, |
| .rxbd_rwptr_clr_reg = R_BE_RXBD_RWPTR_CLR1_V1, |
| .txbd_rwptr_clr2_reg = R_BE_TXBD_RWPTR_CLR1, |
| .dma_io_stop = {R_BE_HAXI_INIT_CFG1, B_BE_STOP_AXI_MST}, |
| .dma_stop1 = {R_BE_HAXI_DMA_STOP1, B_BE_TX_STOP1_MASK}, |
| .dma_stop2 = {0}, |
| .dma_busy1 = {R_BE_HAXI_DMA_BUSY1, DMA_BUSY1_CHECK_BE}, |
| .dma_busy2_reg = 0, |
| .dma_busy3_reg = R_BE_HAXI_DMA_BUSY1, |
| |
| .rpwm_addr = R_BE_PCIE_HRPWM, |
| .cpwm_addr = R_BE_PCIE_CRPWM, |
| .mit_addr = R_BE_PCIE_MIT_CH_EN, |
| .wp_sel_addr = R_BE_WP_ADDR_H_SEL0_3_V1, |
| .tx_dma_ch_mask = 0, |
| .bd_idx_addr_low_power = NULL, |
| .dma_addr_set = &rtw89_pci_ch_dma_addr_set_be, |
| .bd_ram_table = NULL, |
| |
| .ltr_set = rtw89_pci_ltr_set_v2, |
| .fill_txaddr_info = rtw89_pci_fill_txaddr_info_v1, |
| .config_intr_mask = rtw89_pci_config_intr_mask_v2, |
| .enable_intr = rtw89_pci_enable_intr_v2, |
| .disable_intr = rtw89_pci_disable_intr_v2, |
| .recognize_intrs = rtw89_pci_recognize_intrs_v2, |
| }; |
| |
| static const struct rtw89_driver_info rtw89_8922ae_info = { |
| .chip = &rtw8922a_chip_info, |
| .quirks = NULL, |
| .bus = { |
| .pci = &rtw8922a_pci_info, |
| }, |
| }; |
| |
| static const struct pci_device_id rtw89_8922ae_id_table[] = { |
| { |
| PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8922), |
| .driver_data = (kernel_ulong_t)&rtw89_8922ae_info, |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(pci, rtw89_8922ae_id_table); |
| |
| static struct pci_driver rtw89_8922ae_driver = { |
| .name = "rtw89_8922ae", |
| .id_table = rtw89_8922ae_id_table, |
| .probe = rtw89_pci_probe, |
| .remove = rtw89_pci_remove, |
| .driver.pm = &rtw89_pm_ops_be, |
| }; |
| module_pci_driver(rtw89_8922ae_driver); |
| |
| MODULE_AUTHOR("Realtek Corporation"); |
| MODULE_DESCRIPTION("Realtek 802.11be wireless 8922AE driver"); |
| MODULE_LICENSE("Dual BSD/GPL"); |