drivers/power/supply/axp288_charger.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * axp288_charger.c - X-power AXP288 PMIC Charger driver
 *
 * Copyright (C) 2016-2017 Hans de Goede <hdegoede@redhat.com>
 * Copyright (C) 2014 Intel Corporation
 * Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
 */

#include <linux/acpi.h>
#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/regmap.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/usb/otg.h>
#include <linux/notifier.h>
#include <linux/power_supply.h>
#include <linux/property.h>
#include <linux/mfd/axp20x.h>
#include <linux/extcon.h>
#include <linux/dmi.h>
#include <asm/iosf_mbi.h>

#define PS_STAT_VBUS_TRIGGER		BIT(0)
#define PS_STAT_BAT_CHRG_DIR		BIT(2)
#define PS_STAT_VBAT_ABOVE_VHOLD	BIT(3)
#define PS_STAT_VBUS_VALID		BIT(4)
#define PS_STAT_VBUS_PRESENT		BIT(5)

#define CHRG_STAT_BAT_SAFE_MODE		BIT(3)
#define CHRG_STAT_BAT_VALID		BIT(4)
#define CHRG_STAT_BAT_PRESENT		BIT(5)
#define CHRG_STAT_CHARGING		BIT(6)
#define CHRG_STAT_PMIC_OTP		BIT(7)

#define VBUS_ISPOUT_CUR_LIM_MASK	0x03
#define VBUS_ISPOUT_CUR_LIM_BIT_POS	0
#define VBUS_ISPOUT_CUR_LIM_900MA	0x0	/* 900mA */
#define VBUS_ISPOUT_CUR_LIM_1500MA	0x1	/* 1500mA */
#define VBUS_ISPOUT_CUR_LIM_2000MA	0x2	/* 2000mA */
#define VBUS_ISPOUT_CUR_NO_LIM		0x3	/* 2500mA */
#define VBUS_ISPOUT_VHOLD_SET_MASK	0x38
#define VBUS_ISPOUT_VHOLD_SET_BIT_POS	0x3
#define VBUS_ISPOUT_VHOLD_SET_OFFSET	4000	/* 4000mV */
#define VBUS_ISPOUT_VHOLD_SET_LSB_RES	100	/* 100mV */
#define VBUS_ISPOUT_VHOLD_SET_4400MV	0x4	/* 4400mV */
#define VBUS_ISPOUT_VBUS_PATH_DIS	BIT(7)

#define CHRG_CCCV_CC_MASK		0xf		/* 4 bits */
#define CHRG_CCCV_CC_BIT_POS		0
#define CHRG_CCCV_CC_OFFSET		200		/* 200mA */
#define CHRG_CCCV_CC_LSB_RES		200		/* 200mA */
#define CHRG_CCCV_ITERM_20P		BIT(4)		/* 20% of CC */
#define CHRG_CCCV_CV_MASK		0x60		/* 2 bits */
#define CHRG_CCCV_CV_BIT_POS		5
#define CHRG_CCCV_CV_4100MV		0x0		/* 4.10V */
#define CHRG_CCCV_CV_4150MV		0x1		/* 4.15V */
#define CHRG_CCCV_CV_4200MV		0x2		/* 4.20V */
#define CHRG_CCCV_CV_4350MV		0x3		/* 4.35V */
#define CHRG_CCCV_CHG_EN		BIT(7)

#define CNTL2_CC_TIMEOUT_MASK		0x3	/* 2 bits */
#define CNTL2_CC_TIMEOUT_OFFSET		6	/* 6 Hrs */
#define CNTL2_CC_TIMEOUT_LSB_RES	2	/* 2 Hrs */
#define CNTL2_CC_TIMEOUT_12HRS		0x3	/* 12 Hrs */
#define CNTL2_CHGLED_TYPEB		BIT(4)
#define CNTL2_CHG_OUT_TURNON		BIT(5)
#define CNTL2_PC_TIMEOUT_MASK		0xC0
#define CNTL2_PC_TIMEOUT_OFFSET		40	/* 40 mins */
#define CNTL2_PC_TIMEOUT_LSB_RES	10	/* 10 mins */
#define CNTL2_PC_TIMEOUT_70MINS		0x3

#define CHRG_ILIM_TEMP_LOOP_EN		BIT(3)
#define CHRG_VBUS_ILIM_MASK		0xf0
#define CHRG_VBUS_ILIM_BIT_POS		4
#define CHRG_VBUS_ILIM_100MA		0x0	/* 100mA */
#define CHRG_VBUS_ILIM_500MA		0x1	/* 500mA */
#define CHRG_VBUS_ILIM_900MA		0x2	/* 900mA */
#define CHRG_VBUS_ILIM_1500MA		0x3	/* 1500mA */
#define CHRG_VBUS_ILIM_2000MA		0x4	/* 2000mA */
#define CHRG_VBUS_ILIM_2500MA		0x5	/* 2500mA */
#define CHRG_VBUS_ILIM_3000MA		0x6	/* 3000mA */
#define CHRG_VBUS_ILIM_3500MA		0x7	/* 3500mA */
#define CHRG_VBUS_ILIM_4000MA		0x8	/* 4000mA */

#define CHRG_VLTFC_0C			0xA5	/* 0 DegC */
#define CHRG_VHTFC_45C			0x1F	/* 45 DegC */

#define FG_CNTL_OCV_ADJ_EN		BIT(3)

#define CV_4100MV			4100	/* 4100mV */
#define CV_4150MV			4150	/* 4150mV */
#define CV_4200MV			4200	/* 4200mV */
#define CV_4350MV			4350	/* 4350mV */

#define AXP288_REG_UPDATE_INTERVAL	(60 * HZ)

#define AXP288_EXTCON_DEV_NAME		"axp288_extcon"
#define USB_HOST_EXTCON_HID		"INT3496"
#define USB_HOST_EXTCON_NAME		"INT3496:00"

enum {
	VBUS_OV_IRQ = 0,
	CHARGE_DONE_IRQ,
	CHARGE_CHARGING_IRQ,
	BAT_SAFE_QUIT_IRQ,
	BAT_SAFE_ENTER_IRQ,
	QCBTU_IRQ,
	CBTU_IRQ,
	QCBTO_IRQ,
	CBTO_IRQ,
	CHRG_INTR_END,
};

struct axp288_chrg_info {
	struct platform_device *pdev;
	struct regmap *regmap;
	struct regmap_irq_chip_data *regmap_irqc;
	int irq[CHRG_INTR_END];
	struct power_supply *psy_usb;
	struct mutex lock;

	/* OTG/Host mode */
	struct {
		struct work_struct work;
		struct extcon_dev *cable;
		struct notifier_block id_nb;
		bool id_short;
	} otg;

	/* SDP/CDP/DCP USB charging cable notifications */
	struct {
		struct extcon_dev *edev;
		struct notifier_block nb;
		struct work_struct work;
	} cable;

	int cc;
	int cv;
	int max_cc;
	int max_cv;

	unsigned long last_updated;
	unsigned int input_status;
	unsigned int op_mode;
	unsigned int backend_control;
	bool valid;
};

static inline int axp288_charger_set_cc(struct axp288_chrg_info *info, int cc)
{
	u8 reg_val;
	int ret;

	if (cc < CHRG_CCCV_CC_OFFSET)
		cc = CHRG_CCCV_CC_OFFSET;
	else if (cc > info->max_cc)
		cc = info->max_cc;

	reg_val = (cc - CHRG_CCCV_CC_OFFSET) / CHRG_CCCV_CC_LSB_RES;
	cc = (reg_val * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
	reg_val = reg_val << CHRG_CCCV_CC_BIT_POS;

	ret = regmap_update_bits(info->regmap,
				AXP20X_CHRG_CTRL1,
				CHRG_CCCV_CC_MASK, reg_val);
	if (ret >= 0)
		info->cc = cc;

	return ret;
}

static inline int axp288_charger_set_cv(struct axp288_chrg_info *info, int cv)
{
	u8 reg_val;
	int ret;

	if (cv >= CV_4350MV) {
		reg_val = CHRG_CCCV_CV_4350MV;
		cv = CV_4350MV;
	} else if (cv >= CV_4200MV) {
		reg_val = CHRG_CCCV_CV_4200MV;
		cv = CV_4200MV;
	} else if (cv >= CV_4150MV) {
		reg_val = CHRG_CCCV_CV_4150MV;
		cv = CV_4150MV;
	} else {
		reg_val = CHRG_CCCV_CV_4100MV;
		cv = CV_4100MV;
	}

	reg_val = reg_val << CHRG_CCCV_CV_BIT_POS;

	ret = regmap_update_bits(info->regmap,
				AXP20X_CHRG_CTRL1,
				CHRG_CCCV_CV_MASK, reg_val);

	if (ret >= 0)
		info->cv = cv;

	return ret;
}

static int axp288_charger_get_vbus_inlmt(struct axp288_chrg_info *info)
{
	unsigned int val;

	val = info->backend_control;

	val >>= CHRG_VBUS_ILIM_BIT_POS;
	switch (val) {
	case CHRG_VBUS_ILIM_100MA:
		return 100000;
	case CHRG_VBUS_ILIM_500MA:
		return 500000;
	case CHRG_VBUS_ILIM_900MA:
		return 900000;
	case CHRG_VBUS_ILIM_1500MA:
		return 1500000;
	case CHRG_VBUS_ILIM_2000MA:
		return 2000000;
	case CHRG_VBUS_ILIM_2500MA:
		return 2500000;
	case CHRG_VBUS_ILIM_3000MA:
		return 3000000;
	case CHRG_VBUS_ILIM_3500MA:
		return 3500000;
	default:
		/* All b1xxx values map to 4000 mA */
		return 4000000;
	}
}

static inline int axp288_charger_set_vbus_inlmt(struct axp288_chrg_info *info,
					   int inlmt)
{
	int ret;
	u8 reg_val;

	if (inlmt >= 4000000)
		reg_val = CHRG_VBUS_ILIM_4000MA << CHRG_VBUS_ILIM_BIT_POS;
	else if (inlmt >= 3500000)
		reg_val = CHRG_VBUS_ILIM_3500MA << CHRG_VBUS_ILIM_BIT_POS;
	else if (inlmt >= 3000000)
		reg_val = CHRG_VBUS_ILIM_3000MA << CHRG_VBUS_ILIM_BIT_POS;
	else if (inlmt >= 2500000)
		reg_val = CHRG_VBUS_ILIM_2500MA << CHRG_VBUS_ILIM_BIT_POS;
	else if (inlmt >= 2000000)
		reg_val = CHRG_VBUS_ILIM_2000MA << CHRG_VBUS_ILIM_BIT_POS;
	else if (inlmt >= 1500000)
		reg_val = CHRG_VBUS_ILIM_1500MA << CHRG_VBUS_ILIM_BIT_POS;
	else if (inlmt >= 900000)
		reg_val = CHRG_VBUS_ILIM_900MA << CHRG_VBUS_ILIM_BIT_POS;
	else if (inlmt >= 500000)
		reg_val = CHRG_VBUS_ILIM_500MA << CHRG_VBUS_ILIM_BIT_POS;
	else
		reg_val = CHRG_VBUS_ILIM_100MA << CHRG_VBUS_ILIM_BIT_POS;

	ret = regmap_update_bits(info->regmap, AXP20X_CHRG_BAK_CTRL,
				 CHRG_VBUS_ILIM_MASK, reg_val);
	if (ret < 0)
		dev_err(&info->pdev->dev, "charger BAK control %d\n", ret);

	return ret;
}

static int axp288_charger_vbus_path_select(struct axp288_chrg_info *info,
								bool enable)
{
	int ret;

	if (enable)
		ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
					VBUS_ISPOUT_VBUS_PATH_DIS, 0);
	else
		ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
			VBUS_ISPOUT_VBUS_PATH_DIS, VBUS_ISPOUT_VBUS_PATH_DIS);

	if (ret < 0)
		dev_err(&info->pdev->dev, "axp288 vbus path select %d\n", ret);

	return ret;
}

static int axp288_charger_enable_charger(struct axp288_chrg_info *info,
								bool enable)
{
	int ret;

	if (enable)
		ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL1,
				CHRG_CCCV_CHG_EN, CHRG_CCCV_CHG_EN);
	else
		ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL1,
				CHRG_CCCV_CHG_EN, 0);
	if (ret < 0)
		dev_err(&info->pdev->dev, "axp288 enable charger %d\n", ret);

	return ret;
}

static int axp288_get_charger_health(struct axp288_chrg_info *info)
{
	if (!(info->input_status & PS_STAT_VBUS_PRESENT))
		return POWER_SUPPLY_HEALTH_UNKNOWN;

	if (!(info->input_status & PS_STAT_VBUS_VALID))
		return POWER_SUPPLY_HEALTH_DEAD;
	else if (info->op_mode & CHRG_STAT_PMIC_OTP)
		return POWER_SUPPLY_HEALTH_OVERHEAT;
	else if (info->op_mode & CHRG_STAT_BAT_SAFE_MODE)
		return POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
	else
		return POWER_SUPPLY_HEALTH_GOOD;
}

static int axp288_charger_usb_set_property(struct power_supply *psy,
				    enum power_supply_property psp,
				    const union power_supply_propval *val)
{
	struct axp288_chrg_info *info = power_supply_get_drvdata(psy);
	int ret = 0;
	int scaled_val;

	mutex_lock(&info->lock);
	switch (psp) {
	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
		scaled_val = min(val->intval, info->max_cc);
		scaled_val = DIV_ROUND_CLOSEST(scaled_val, 1000);
		ret = axp288_charger_set_cc(info, scaled_val);
		if (ret < 0) {
			dev_warn(&info->pdev->dev, "set charge current failed\n");
			goto out;
		}
		break;
	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
		scaled_val = DIV_ROUND_CLOSEST(val->intval, 1000);
		scaled_val = min(scaled_val, info->max_cv);
		ret = axp288_charger_set_cv(info, scaled_val);
		if (ret < 0) {
			dev_warn(&info->pdev->dev, "set charge voltage failed\n");
			goto out;
		}
		break;
	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
		ret = axp288_charger_set_vbus_inlmt(info, val->intval);
		if (ret < 0) {
			dev_warn(&info->pdev->dev, "set input current limit failed\n");
			goto out;
		}
		info->valid = false;
		break;
	default:
		ret = -EINVAL;
	}

out:
	mutex_unlock(&info->lock);
	return ret;
}

static int axp288_charger_reg_readb(struct axp288_chrg_info *info, int reg, unsigned int *ret_val)
{
	int ret;

	ret = regmap_read(info->regmap, reg, ret_val);
	if (ret < 0) {
		dev_err(&info->pdev->dev, "Error %d on reading value from register 0x%04x\n",
			ret,
			reg);
		return ret;
	}
	return 0;
}

static int axp288_charger_usb_update_property(struct axp288_chrg_info *info)
{
	int ret = 0;

	if (info->valid && time_before(jiffies, info->last_updated + AXP288_REG_UPDATE_INTERVAL))
		return 0;

	dev_dbg(&info->pdev->dev, "Charger updating register values...\n");

	ret = iosf_mbi_block_punit_i2c_access();
	if (ret < 0)
		return ret;

	ret = axp288_charger_reg_readb(info, AXP20X_PWR_INPUT_STATUS, &info->input_status);
	if (ret < 0)
		goto out;

	ret = axp288_charger_reg_readb(info, AXP20X_PWR_OP_MODE, &info->op_mode);
	if (ret < 0)
		goto out;

	ret = axp288_charger_reg_readb(info, AXP20X_CHRG_BAK_CTRL, &info->backend_control);
	if (ret < 0)
		goto out;

	info->last_updated = jiffies;
	info->valid = true;
out:
	iosf_mbi_unblock_punit_i2c_access();
	return ret;
}

static int axp288_charger_usb_get_property(struct power_supply *psy,
				    enum power_supply_property psp,
				    union power_supply_propval *val)
{
	struct axp288_chrg_info *info = power_supply_get_drvdata(psy);
	int ret;

	mutex_lock(&info->lock);
	ret = axp288_charger_usb_update_property(info);
	if (ret < 0)
		goto out;

	switch (psp) {
	case POWER_SUPPLY_PROP_PRESENT:
		/* Check for OTG case first */
		if (info->otg.id_short) {
			val->intval = 0;
			break;
		}
		val->intval = (info->input_status & PS_STAT_VBUS_PRESENT) ? 1 : 0;
		break;
	case POWER_SUPPLY_PROP_ONLINE:
		/* Check for OTG case first */
		if (info->otg.id_short) {
			val->intval = 0;
			break;
		}
		val->intval = (info->input_status & PS_STAT_VBUS_VALID) ? 1 : 0;
		break;
	case POWER_SUPPLY_PROP_HEALTH:
		val->intval = axp288_get_charger_health(info);
		break;
	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
		val->intval = info->cc * 1000;
		break;
	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
		val->intval = info->max_cc * 1000;
		break;
	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
		val->intval = info->cv * 1000;
		break;
	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
		val->intval = info->max_cv * 1000;
		break;
	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
		val->intval = axp288_charger_get_vbus_inlmt(info);
		break;
	default:
		ret = -EINVAL;
	}

out:
	mutex_unlock(&info->lock);
	return ret;
}

static int axp288_charger_property_is_writeable(struct power_supply *psy,
		enum power_supply_property psp)
{
	int ret;

	switch (psp) {
	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
		ret = 1;
		break;
	default:
		ret = 0;
	}

	return ret;
}

static enum power_supply_property axp288_usb_props[] = {
	POWER_SUPPLY_PROP_PRESENT,
	POWER_SUPPLY_PROP_ONLINE,
	POWER_SUPPLY_PROP_TYPE,
	POWER_SUPPLY_PROP_HEALTH,
	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
};

static const struct power_supply_desc axp288_charger_desc = {
	.name			= "axp288_charger",
	.type			= POWER_SUPPLY_TYPE_USB,
	.properties		= axp288_usb_props,
	.num_properties		= ARRAY_SIZE(axp288_usb_props),
	.get_property		= axp288_charger_usb_get_property,
	.set_property		= axp288_charger_usb_set_property,
	.property_is_writeable	= axp288_charger_property_is_writeable,
};

static irqreturn_t axp288_charger_irq_thread_handler(int irq, void *dev)
{
	struct axp288_chrg_info *info = dev;
	int i;

	for (i = 0; i < CHRG_INTR_END; i++) {
		if (info->irq[i] == irq)
			break;
	}

	if (i >= CHRG_INTR_END) {
		dev_warn(&info->pdev->dev, "spurious interrupt!!\n");
		return IRQ_NONE;
	}

	switch (i) {
	case VBUS_OV_IRQ:
		dev_dbg(&info->pdev->dev, "VBUS Over Voltage INTR\n");
		break;
	case CHARGE_DONE_IRQ:
		dev_dbg(&info->pdev->dev, "Charging Done INTR\n");
		break;
	case CHARGE_CHARGING_IRQ:
		dev_dbg(&info->pdev->dev, "Start Charging IRQ\n");
		break;
	case BAT_SAFE_QUIT_IRQ:
		dev_dbg(&info->pdev->dev,
			"Quit Safe Mode(restart timer) Charging IRQ\n");
		break;
	case BAT_SAFE_ENTER_IRQ:
		dev_dbg(&info->pdev->dev,
			"Enter Safe Mode(timer expire) Charging IRQ\n");
		break;
	case QCBTU_IRQ:
		dev_dbg(&info->pdev->dev,
			"Quit Battery Under Temperature(CHRG) INTR\n");
		break;
	case CBTU_IRQ:
		dev_dbg(&info->pdev->dev,
			"Hit Battery Under Temperature(CHRG) INTR\n");
		break;
	case QCBTO_IRQ:
		dev_dbg(&info->pdev->dev,
			"Quit Battery Over Temperature(CHRG) INTR\n");
		break;
	case CBTO_IRQ:
		dev_dbg(&info->pdev->dev,
			"Hit Battery Over Temperature(CHRG) INTR\n");
		break;
	default:
		dev_warn(&info->pdev->dev, "Spurious Interrupt!!!\n");
		goto out;
	}
	mutex_lock(&info->lock);
	info->valid = false;
	mutex_unlock(&info->lock);
	power_supply_changed(info->psy_usb);
out:
	return IRQ_HANDLED;
}

/*
 * The HP Pavilion x2 10 series comes in a number of variants:
 * Bay Trail SoC    + AXP288 PMIC, Micro-USB, DMI_BOARD_NAME: "8021"
 * Bay Trail SoC    + AXP288 PMIC, Type-C,    DMI_BOARD_NAME: "815D"
 * Cherry Trail SoC + AXP288 PMIC, Type-C,    DMI_BOARD_NAME: "813E"
 * Cherry Trail SoC + TI PMIC,     Type-C,    DMI_BOARD_NAME: "827C" or "82F4"
 *
 * The variants with the AXP288 + Type-C connector are all kinds of special:
 *
 * 1. They use a Type-C connector which the AXP288 does not support, so when
 * using a Type-C charger it is not recognized. Unlike most AXP288 devices,
 * this model actually has mostly working ACPI AC / Battery code, the ACPI code
 * "solves" this by simply setting the input_current_limit to 3A.
 * There are still some issues with the ACPI code, so we use this native driver,
 * and to solve the charging not working (500mA is not enough) issue we hardcode
 * the 3A input_current_limit like the ACPI code does.
 *
 * 2. If no charger is connected the machine boots with the vbus-path disabled.
 * Normally this is done when a 5V boost converter is active to avoid the PMIC
 * trying to charge from the 5V boost converter's output. This is done when
 * an OTG host cable is inserted and the ID pin on the micro-B receptacle is
 * pulled low and the ID pin has an ACPI event handler associated with it
 * which re-enables the vbus-path when the ID pin is pulled high when the
 * OTG host cable is removed. The Type-C connector has no ID pin, there is
 * no ID pin handler and there appears to be no 5V boost converter, so we
 * end up not charging because the vbus-path is disabled, until we unplug
 * the charger which automatically clears the vbus-path disable bit and then
 * on the second plug-in of the adapter we start charging. To solve the not
 * charging on first charger plugin we unconditionally enable the vbus-path at
 * probe on this model, which is safe since there is no 5V boost converter.
 */
static const struct dmi_system_id axp288_hp_x2_dmi_ids[] = {
	{
		.matches = {
			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
			DMI_EXACT_MATCH(DMI_BOARD_NAME, "815D"),
		},
	},
	{
		.matches = {
			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "HP"),
			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
			DMI_EXACT_MATCH(DMI_BOARD_NAME, "813E"),
		},
	},
	{} /* Terminating entry */
};

static void axp288_charger_extcon_evt_worker(struct work_struct *work)
{
	struct axp288_chrg_info *info =
	    container_of(work, struct axp288_chrg_info, cable.work);
	int ret, current_limit;
	struct extcon_dev *edev = info->cable.edev;
	unsigned int val;

	ret = regmap_read(info->regmap, AXP20X_PWR_INPUT_STATUS, &val);
	if (ret < 0) {
		dev_err(&info->pdev->dev, "Error reading status (%d)\n", ret);
		return;
	}

	/* Offline? Disable charging and bail */
	if (!(val & PS_STAT_VBUS_VALID)) {
		dev_dbg(&info->pdev->dev, "USB charger disconnected\n");
		axp288_charger_enable_charger(info, false);
		mutex_lock(&info->lock);
		info->valid = false;
		mutex_unlock(&info->lock);
		power_supply_changed(info->psy_usb);
		return;
	}

	/* Determine cable/charger type */
	if (dmi_check_system(axp288_hp_x2_dmi_ids)) {
		/* See comment above axp288_hp_x2_dmi_ids declaration */
		dev_dbg(&info->pdev->dev, "HP X2 with Type-C, setting inlmt to 3A\n");
		current_limit = 3000000;
	} else if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) {
		dev_dbg(&info->pdev->dev, "USB SDP charger is connected\n");
		current_limit = 500000;
	} else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) {
		dev_dbg(&info->pdev->dev, "USB CDP charger is connected\n");
		current_limit = 1500000;
	} else if (extcon_get_state(edev, EXTCON_CHG_USB_DCP) > 0) {
		dev_dbg(&info->pdev->dev, "USB DCP charger is connected\n");
		current_limit = 2000000;
	} else {
		/* Charger type detection still in progress, bail. */
		return;
	}

	/* Set vbus current limit first, then enable charger */
	ret = axp288_charger_set_vbus_inlmt(info, current_limit);
	if (ret == 0)
		axp288_charger_enable_charger(info, true);
	else
		dev_err(&info->pdev->dev,
			"error setting current limit (%d)\n", ret);

	mutex_lock(&info->lock);
	info->valid = false;
	mutex_unlock(&info->lock);
	power_supply_changed(info->psy_usb);
}

static int axp288_charger_handle_cable_evt(struct notifier_block *nb,
					   unsigned long event, void *param)
{
	struct axp288_chrg_info *info =
		container_of(nb, struct axp288_chrg_info, cable.nb);
	schedule_work(&info->cable.work);
	return NOTIFY_OK;
}

static void axp288_charger_otg_evt_worker(struct work_struct *work)
{
	struct axp288_chrg_info *info =
	    container_of(work, struct axp288_chrg_info, otg.work);
	struct extcon_dev *edev = info->otg.cable;
	int ret, usb_host = extcon_get_state(edev, EXTCON_USB_HOST);

	dev_dbg(&info->pdev->dev, "external connector USB-Host is %s\n",
				usb_host ? "attached" : "detached");

	/*
	 * Set usb_id_short flag to avoid running charger detection logic
	 * in case usb host.
	 */
	info->otg.id_short = usb_host;

	/* Disable VBUS path before enabling the 5V boost */
	ret = axp288_charger_vbus_path_select(info, !info->otg.id_short);
	if (ret < 0)
		dev_warn(&info->pdev->dev, "vbus path disable failed\n");
}

static int axp288_charger_handle_otg_evt(struct notifier_block *nb,
				   unsigned long event, void *param)
{
	struct axp288_chrg_info *info =
	    container_of(nb, struct axp288_chrg_info, otg.id_nb);

	schedule_work(&info->otg.work);

	return NOTIFY_OK;
}

static int charger_init_hw_regs(struct axp288_chrg_info *info)
{
	int ret, cc, cv;
	unsigned int val;

	/* Program temperature thresholds */
	ret = regmap_write(info->regmap, AXP20X_V_LTF_CHRG, CHRG_VLTFC_0C);
	if (ret < 0) {
		dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
							AXP20X_V_LTF_CHRG, ret);
		return ret;
	}

	ret = regmap_write(info->regmap, AXP20X_V_HTF_CHRG, CHRG_VHTFC_45C);
	if (ret < 0) {
		dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
							AXP20X_V_HTF_CHRG, ret);
		return ret;
	}

	/* Do not turn-off charger o/p after charge cycle ends */
	ret = regmap_update_bits(info->regmap,
				AXP20X_CHRG_CTRL2,
				CNTL2_CHG_OUT_TURNON, CNTL2_CHG_OUT_TURNON);
	if (ret < 0) {
		dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
						AXP20X_CHRG_CTRL2, ret);
		return ret;
	}

	/* Setup ending condition for charging to be 10% of I(chrg) */
	ret = regmap_update_bits(info->regmap,
				AXP20X_CHRG_CTRL1,
				CHRG_CCCV_ITERM_20P, 0);
	if (ret < 0) {
		dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
						AXP20X_CHRG_CTRL1, ret);
		return ret;
	}

	/* Disable OCV-SOC curve calibration */
	ret = regmap_update_bits(info->regmap,
				AXP20X_CC_CTRL,
				FG_CNTL_OCV_ADJ_EN, 0);
	if (ret < 0) {
		dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
						AXP20X_CC_CTRL, ret);
		return ret;
	}

	if (dmi_check_system(axp288_hp_x2_dmi_ids)) {
		/* See comment above axp288_hp_x2_dmi_ids declaration */
		ret = axp288_charger_vbus_path_select(info, true);
		if (ret < 0)
			return ret;
	} else {
		/* Set Vhold to the factory default / recommended 4.4V */
		val = VBUS_ISPOUT_VHOLD_SET_4400MV << VBUS_ISPOUT_VHOLD_SET_BIT_POS;
		ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
					 VBUS_ISPOUT_VHOLD_SET_MASK, val);
		if (ret < 0) {
			dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
				AXP20X_VBUS_IPSOUT_MGMT, ret);
			return ret;
		}
	}

	/* Read current charge voltage and current limit */
	ret = regmap_read(info->regmap, AXP20X_CHRG_CTRL1, &val);
	if (ret < 0) {
		dev_err(&info->pdev->dev, "register(%x) read error(%d)\n",
			AXP20X_CHRG_CTRL1, ret);
		return ret;
	}

	/* Determine charge voltage */
	cv = (val & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS;
	switch (cv) {
	case CHRG_CCCV_CV_4100MV:
		info->cv = CV_4100MV;
		break;
	case CHRG_CCCV_CV_4150MV:
		info->cv = CV_4150MV;
		break;
	case CHRG_CCCV_CV_4200MV:
		info->cv = CV_4200MV;
		break;
	case CHRG_CCCV_CV_4350MV:
		info->cv = CV_4350MV;
		break;
	}

	/* Determine charge current limit */
	cc = (val & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS;
	cc = (cc * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
	info->cc = cc;

	/*
	 * Do not allow the user to configure higher settings then those
	 * set by the firmware
	 */
	info->max_cv = info->cv;
	info->max_cc = info->cc;

	return 0;
}

static void axp288_charger_cancel_work(void *data)
{
	struct axp288_chrg_info *info = data;

	cancel_work_sync(&info->otg.work);
	cancel_work_sync(&info->cable.work);
}

static int axp288_charger_probe(struct platform_device *pdev)
{
	int ret, i, pirq;
	struct axp288_chrg_info *info;
	struct device *dev = &pdev->dev;
	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
	struct power_supply_config charger_cfg = {};
	const char *extcon_name = NULL;
	unsigned int val;

	/*
	 * Normally the native AXP288 fg/charger drivers are preferred but
	 * on some devices the ACPI drivers should be used instead.
	 */
	if (!acpi_quirk_skip_acpi_ac_and_battery())
		return -ENODEV;

	/*
	 * On some devices the fuelgauge and charger parts of the axp288 are
	 * not used, check that the fuelgauge is enabled (CC_CTRL != 0).
	 */
	ret = regmap_read(axp20x->regmap, AXP20X_CC_CTRL, &val);
	if (ret < 0)
		return ret;
	if (val == 0)
		return -ENODEV;

	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
	if (!info)
		return -ENOMEM;

	mutex_init(&info->lock);
	info->pdev = pdev;
	info->regmap = axp20x->regmap;
	info->regmap_irqc = axp20x->regmap_irqc;

	info->cable.edev = extcon_get_extcon_dev(AXP288_EXTCON_DEV_NAME);
	if (IS_ERR(info->cable.edev)) {
		dev_err_probe(dev, PTR_ERR(info->cable.edev),
			      "extcon_get_extcon_dev(%s) failed\n",
			      AXP288_EXTCON_DEV_NAME);
		return PTR_ERR(info->cable.edev);
	}

	/*
	 * On devices with broken ACPI GPIO event handlers there also is no ACPI
	 * "INT3496" (USB_HOST_EXTCON_HID) device. x86-android-tablets.ko
	 * instantiates an "intel-int3496" extcon on these devs as a workaround.
	 */
	if (acpi_quirk_skip_gpio_event_handlers())
		extcon_name = "intel-int3496";
	else if (acpi_dev_present(USB_HOST_EXTCON_HID, NULL, -1))
		extcon_name = USB_HOST_EXTCON_NAME;

	if (extcon_name) {
		info->otg.cable = extcon_get_extcon_dev(extcon_name);
		if (IS_ERR(info->otg.cable)) {
			dev_err_probe(dev, PTR_ERR(info->otg.cable),
				      "extcon_get_extcon_dev(%s) failed\n",
				      USB_HOST_EXTCON_NAME);
			return PTR_ERR(info->otg.cable);
		}
		dev_info(dev, "Using " USB_HOST_EXTCON_HID " extcon for usb-id\n");
	}

	platform_set_drvdata(pdev, info);

	ret = charger_init_hw_regs(info);
	if (ret)
		return ret;

	/* Register with power supply class */
	charger_cfg.drv_data = info;
	info->psy_usb = devm_power_supply_register(dev, &axp288_charger_desc,
						   &charger_cfg);
	if (IS_ERR(info->psy_usb)) {
		ret = PTR_ERR(info->psy_usb);
		dev_err(dev, "failed to register power supply: %d\n", ret);
		return ret;
	}

	/* Cancel our work on cleanup, register this before the notifiers */
	ret = devm_add_action(dev, axp288_charger_cancel_work, info);
	if (ret)
		return ret;

	/* Register for extcon notification */
	INIT_WORK(&info->cable.work, axp288_charger_extcon_evt_worker);
	info->cable.nb.notifier_call = axp288_charger_handle_cable_evt;
	ret = devm_extcon_register_notifier_all(dev, info->cable.edev,
						&info->cable.nb);
	if (ret) {
		dev_err(dev, "failed to register cable extcon notifier\n");
		return ret;
	}
	schedule_work(&info->cable.work);

	/* Register for OTG notification */
	INIT_WORK(&info->otg.work, axp288_charger_otg_evt_worker);
	info->otg.id_nb.notifier_call = axp288_charger_handle_otg_evt;
	if (info->otg.cable) {
		ret = devm_extcon_register_notifier(dev, info->otg.cable,
					EXTCON_USB_HOST, &info->otg.id_nb);
		if (ret) {
			dev_err(dev, "failed to register EXTCON_USB_HOST notifier\n");
			return ret;
		}
		schedule_work(&info->otg.work);
	}

	/* Register charger interrupts */
	for (i = 0; i < CHRG_INTR_END; i++) {
		pirq = platform_get_irq(info->pdev, i);
		if (pirq < 0)
			return pirq;

		info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq);
		if (info->irq[i] < 0) {
			dev_warn(&info->pdev->dev,
				"failed to get virtual interrupt=%d\n", pirq);
			return info->irq[i];
		}
		ret = devm_request_threaded_irq(&info->pdev->dev, info->irq[i],
					NULL, axp288_charger_irq_thread_handler,
					IRQF_ONESHOT, info->pdev->name, info);
		if (ret) {
			dev_err(dev, "failed to request interrupt=%d\n",
								info->irq[i]);
			return ret;
		}
	}

	return 0;
}

static const struct platform_device_id axp288_charger_id_table[] = {
	{ .name = "axp288_charger" },
	{},
};
MODULE_DEVICE_TABLE(platform, axp288_charger_id_table);

static struct platform_driver axp288_charger_driver = {
	.probe = axp288_charger_probe,
	.id_table = axp288_charger_id_table,
	.driver = {
		.name = "axp288_charger",
	},
};

module_platform_driver(axp288_charger_driver);

MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>");
MODULE_DESCRIPTION("X-power AXP288 Charger Driver");
MODULE_LICENSE("GPL v2");