| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Backup battery driver for Wolfson Microelectronics wm831x PMICs |
| * |
| * Copyright 2009 Wolfson Microelectronics PLC. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/err.h> |
| #include <linux/platform_device.h> |
| #include <linux/power_supply.h> |
| #include <linux/slab.h> |
| |
| #include <linux/mfd/wm831x/core.h> |
| #include <linux/mfd/wm831x/auxadc.h> |
| #include <linux/mfd/wm831x/pmu.h> |
| #include <linux/mfd/wm831x/pdata.h> |
| |
| struct wm831x_backup { |
| struct wm831x *wm831x; |
| struct power_supply *backup; |
| struct power_supply_desc backup_desc; |
| char name[20]; |
| }; |
| |
| static int wm831x_backup_read_voltage(struct wm831x *wm831x, |
| enum wm831x_auxadc src, |
| union power_supply_propval *val) |
| { |
| int ret; |
| |
| ret = wm831x_auxadc_read_uv(wm831x, src); |
| if (ret >= 0) |
| val->intval = ret; |
| |
| return ret; |
| } |
| |
| /********************************************************************* |
| * Backup supply properties |
| *********************************************************************/ |
| |
| static void wm831x_config_backup(struct wm831x *wm831x) |
| { |
| struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data; |
| struct wm831x_backup_pdata *pdata; |
| int ret, reg; |
| |
| if (!wm831x_pdata || !wm831x_pdata->backup) { |
| dev_warn(wm831x->dev, |
| "No backup battery charger configuration\n"); |
| return; |
| } |
| |
| pdata = wm831x_pdata->backup; |
| |
| reg = 0; |
| |
| if (pdata->charger_enable) |
| reg |= WM831X_BKUP_CHG_ENA | WM831X_BKUP_BATT_DET_ENA; |
| if (pdata->no_constant_voltage) |
| reg |= WM831X_BKUP_CHG_MODE; |
| |
| switch (pdata->vlim) { |
| case 2500: |
| break; |
| case 3100: |
| reg |= WM831X_BKUP_CHG_VLIM; |
| break; |
| default: |
| dev_err(wm831x->dev, "Invalid backup voltage limit %dmV\n", |
| pdata->vlim); |
| } |
| |
| switch (pdata->ilim) { |
| case 100: |
| break; |
| case 200: |
| reg |= 1; |
| break; |
| case 300: |
| reg |= 2; |
| break; |
| case 400: |
| reg |= 3; |
| break; |
| default: |
| dev_err(wm831x->dev, "Invalid backup current limit %duA\n", |
| pdata->ilim); |
| } |
| |
| ret = wm831x_reg_unlock(wm831x); |
| if (ret != 0) { |
| dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret); |
| return; |
| } |
| |
| ret = wm831x_set_bits(wm831x, WM831X_BACKUP_CHARGER_CONTROL, |
| WM831X_BKUP_CHG_ENA_MASK | |
| WM831X_BKUP_CHG_MODE_MASK | |
| WM831X_BKUP_BATT_DET_ENA_MASK | |
| WM831X_BKUP_CHG_VLIM_MASK | |
| WM831X_BKUP_CHG_ILIM_MASK, |
| reg); |
| if (ret != 0) |
| dev_err(wm831x->dev, |
| "Failed to set backup charger config: %d\n", ret); |
| |
| wm831x_reg_lock(wm831x); |
| } |
| |
| static int wm831x_backup_get_prop(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct wm831x_backup *devdata = dev_get_drvdata(psy->dev.parent); |
| struct wm831x *wm831x = devdata->wm831x; |
| int ret = 0; |
| |
| ret = wm831x_reg_read(wm831x, WM831X_BACKUP_CHARGER_CONTROL); |
| if (ret < 0) |
| return ret; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| if (ret & WM831X_BKUP_CHG_STS) |
| val->intval = POWER_SUPPLY_STATUS_CHARGING; |
| else |
| val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| break; |
| |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| ret = wm831x_backup_read_voltage(wm831x, WM831X_AUX_BKUP_BATT, |
| val); |
| break; |
| |
| case POWER_SUPPLY_PROP_PRESENT: |
| if (ret & WM831X_BKUP_CHG_STS) |
| val->intval = 1; |
| else |
| val->intval = 0; |
| break; |
| |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static enum power_supply_property wm831x_backup_props[] = { |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_PRESENT, |
| }; |
| |
| /********************************************************************* |
| * Initialisation |
| *********************************************************************/ |
| |
| static int wm831x_backup_probe(struct platform_device *pdev) |
| { |
| struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); |
| struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data; |
| struct wm831x_backup *devdata; |
| |
| devdata = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_backup), |
| GFP_KERNEL); |
| if (devdata == NULL) |
| return -ENOMEM; |
| |
| devdata->wm831x = wm831x; |
| |
| /* We ignore configuration failures since we can still read |
| * back the status without enabling the charger (which may |
| * already be enabled anyway). |
| */ |
| wm831x_config_backup(wm831x); |
| |
| if (wm831x_pdata && wm831x_pdata->wm831x_num) |
| snprintf(devdata->name, sizeof(devdata->name), |
| "wm831x-backup.%d", wm831x_pdata->wm831x_num); |
| else |
| snprintf(devdata->name, sizeof(devdata->name), |
| "wm831x-backup"); |
| |
| devdata->backup_desc.name = devdata->name; |
| devdata->backup_desc.type = POWER_SUPPLY_TYPE_BATTERY; |
| devdata->backup_desc.properties = wm831x_backup_props; |
| devdata->backup_desc.num_properties = ARRAY_SIZE(wm831x_backup_props); |
| devdata->backup_desc.get_property = wm831x_backup_get_prop; |
| devdata->backup = devm_power_supply_register(&pdev->dev, |
| &devdata->backup_desc, NULL); |
| |
| return PTR_ERR_OR_ZERO(devdata->backup); |
| } |
| |
| static struct platform_driver wm831x_backup_driver = { |
| .probe = wm831x_backup_probe, |
| .driver = { |
| .name = "wm831x-backup", |
| }, |
| }; |
| |
| module_platform_driver(wm831x_backup_driver); |
| |
| MODULE_DESCRIPTION("Backup battery charger driver for WM831x PMICs"); |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:wm831x-backup"); |