| /* |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk) |
| */ |
| #include <linux/errno.h> |
| #include <linux/types.h> |
| #include <linux/socket.h> |
| #include <linux/in.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/timer.h> |
| #include <linux/string.h> |
| #include <linux/sockios.h> |
| #include <linux/net.h> |
| #include <linux/slab.h> |
| #include <net/ax25.h> |
| #include <linux/inet.h> |
| #include <linux/netdevice.h> |
| #include <linux/if_arp.h> |
| #include <linux/skbuff.h> |
| #include <net/sock.h> |
| #include <asm/uaccess.h> |
| #include <linux/fcntl.h> |
| #include <linux/termios.h> /* For TIOCINQ/OUTQ */ |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/notifier.h> |
| #include <linux/proc_fs.h> |
| #include <linux/stat.h> |
| #include <linux/netfilter.h> |
| #include <linux/sysctl.h> |
| #include <net/ip.h> |
| #include <net/arp.h> |
| |
| /* |
| * IP over AX.25 encapsulation. |
| */ |
| |
| /* |
| * Shove an AX.25 UI header on an IP packet and handle ARP |
| */ |
| |
| #ifdef CONFIG_INET |
| |
| static int ax25_hard_header(struct sk_buff *skb, struct net_device *dev, |
| unsigned short type, const void *daddr, |
| const void *saddr, unsigned int len) |
| { |
| unsigned char *buff; |
| |
| /* they sometimes come back to us... */ |
| if (type == ETH_P_AX25) |
| return 0; |
| |
| /* header is an AX.25 UI frame from us to them */ |
| buff = skb_push(skb, AX25_HEADER_LEN); |
| *buff++ = 0x00; /* KISS DATA */ |
| |
| if (daddr != NULL) |
| memcpy(buff, daddr, dev->addr_len); /* Address specified */ |
| |
| buff[6] &= ~AX25_CBIT; |
| buff[6] &= ~AX25_EBIT; |
| buff[6] |= AX25_SSSID_SPARE; |
| buff += AX25_ADDR_LEN; |
| |
| if (saddr != NULL) |
| memcpy(buff, saddr, dev->addr_len); |
| else |
| memcpy(buff, dev->dev_addr, dev->addr_len); |
| |
| buff[6] &= ~AX25_CBIT; |
| buff[6] |= AX25_EBIT; |
| buff[6] |= AX25_SSSID_SPARE; |
| buff += AX25_ADDR_LEN; |
| |
| *buff++ = AX25_UI; /* UI */ |
| |
| /* Append a suitable AX.25 PID */ |
| switch (type) { |
| case ETH_P_IP: |
| *buff++ = AX25_P_IP; |
| break; |
| case ETH_P_ARP: |
| *buff++ = AX25_P_ARP; |
| break; |
| default: |
| printk(KERN_ERR "AX.25: ax25_hard_header - wrong protocol type 0x%2.2x\n", type); |
| *buff++ = 0; |
| break; |
| } |
| |
| if (daddr != NULL) |
| return AX25_HEADER_LEN; |
| |
| return -AX25_HEADER_LEN; /* Unfinished header */ |
| } |
| |
| static int ax25_rebuild_header(struct sk_buff *skb) |
| { |
| struct sk_buff *ourskb; |
| unsigned char *bp = skb->data; |
| ax25_route *route; |
| struct net_device *dev = NULL; |
| ax25_address *src, *dst; |
| ax25_digi *digipeat = NULL; |
| ax25_dev *ax25_dev; |
| ax25_cb *ax25; |
| char ip_mode = ' '; |
| |
| dst = (ax25_address *)(bp + 1); |
| src = (ax25_address *)(bp + 8); |
| |
| if (arp_find(bp + 1, skb)) |
| return 1; |
| |
| route = ax25_get_route(dst, NULL); |
| if (route) { |
| digipeat = route->digipeat; |
| dev = route->dev; |
| ip_mode = route->ip_mode; |
| } |
| |
| if (dev == NULL) |
| dev = skb->dev; |
| |
| if ((ax25_dev = ax25_dev_ax25dev(dev)) == NULL) { |
| kfree_skb(skb); |
| goto put; |
| } |
| |
| if (bp[16] == AX25_P_IP) { |
| if (ip_mode == 'V' || (ip_mode == ' ' && ax25_dev->values[AX25_VALUES_IPDEFMODE])) { |
| /* |
| * We copy the buffer and release the original thereby |
| * keeping it straight |
| * |
| * Note: we report 1 back so the caller will |
| * not feed the frame direct to the physical device |
| * We don't want that to happen. (It won't be upset |
| * as we have pulled the frame from the queue by |
| * freeing it). |
| * |
| * NB: TCP modifies buffers that are still |
| * on a device queue, thus we use skb_copy() |
| * instead of using skb_clone() unless this |
| * gets fixed. |
| */ |
| |
| ax25_address src_c; |
| ax25_address dst_c; |
| |
| if ((ourskb = skb_copy(skb, GFP_ATOMIC)) == NULL) { |
| kfree_skb(skb); |
| goto put; |
| } |
| |
| if (skb->sk != NULL) |
| skb_set_owner_w(ourskb, skb->sk); |
| |
| kfree_skb(skb); |
| /* dl9sau: bugfix |
| * after kfree_skb(), dst and src which were pointer |
| * to bp which is part of skb->data would not be valid |
| * anymore hope that after skb_pull(ourskb, ..) our |
| * dsc_c and src_c will not become invalid |
| */ |
| bp = ourskb->data; |
| dst_c = *(ax25_address *)(bp + 1); |
| src_c = *(ax25_address *)(bp + 8); |
| |
| skb_pull(ourskb, AX25_HEADER_LEN - 1); /* Keep PID */ |
| skb_reset_network_header(ourskb); |
| |
| ax25=ax25_send_frame( |
| ourskb, |
| ax25_dev->values[AX25_VALUES_PACLEN], |
| &src_c, |
| &dst_c, digipeat, dev); |
| if (ax25) { |
| ax25_cb_put(ax25); |
| } |
| goto put; |
| } |
| } |
| |
| bp[7] &= ~AX25_CBIT; |
| bp[7] &= ~AX25_EBIT; |
| bp[7] |= AX25_SSSID_SPARE; |
| |
| bp[14] &= ~AX25_CBIT; |
| bp[14] |= AX25_EBIT; |
| bp[14] |= AX25_SSSID_SPARE; |
| |
| skb_pull(skb, AX25_KISS_HEADER_LEN); |
| |
| if (digipeat != NULL) { |
| if ((ourskb = ax25_rt_build_path(skb, src, dst, route->digipeat)) == NULL) { |
| kfree_skb(skb); |
| goto put; |
| } |
| |
| skb = ourskb; |
| } |
| |
| ax25_queue_xmit(skb, dev); |
| |
| put: |
| if (route) |
| ax25_put_route(route); |
| |
| return 1; |
| } |
| |
| int ax25_neigh_construct(struct neighbour *neigh) |
| { |
| /* This trouble could be saved if ax25 would right a proper |
| * dev_queue_xmit function. |
| */ |
| struct ax25_neigh_priv *priv = neighbour_priv(neigh); |
| |
| if (neigh->tbl->family != AF_INET) |
| return -EINVAL; |
| |
| priv->ops = *neigh->ops; |
| priv->ops.output = neigh_compat_output; |
| priv->ops.connected_output = neigh_compat_output; |
| return 0; |
| } |
| |
| #else /* INET */ |
| |
| static int ax25_hard_header(struct sk_buff *skb, struct net_device *dev, |
| unsigned short type, const void *daddr, |
| const void *saddr, unsigned int len) |
| { |
| return -AX25_HEADER_LEN; |
| } |
| |
| static int ax25_rebuild_header(struct sk_buff *skb) |
| { |
| return 1; |
| } |
| |
| int ax25_neigh_construct(struct neighbour *neigh) |
| { |
| return 0; |
| } |
| #endif |
| |
| const struct header_ops ax25_header_ops = { |
| .create = ax25_hard_header, |
| .rebuild = ax25_rebuild_header, |
| }; |
| |
| EXPORT_SYMBOL(ax25_header_ops); |
| EXPORT_SYMBOL(ax25_neigh_construct); |
| |