Merge tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY/Serial driver updates and cleanups for
6.9-rc1. Included in here are:
- more tty cleanups from Jiri
- loads of 8250 driver cleanups from Andy
- max310x driver updates
- samsung serial driver updates
- uart_prepare_sysrq_char() updates for many drivers
- platform driver remove callback void cleanups
- stm32 driver updates
- other small tty/serial driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
dt-bindings: serial: stm32: add power-domains property
serial: 8250_dw: Replace ACPI device check by a quirk
serial: Lock console when calling into driver before registration
serial: 8250_uniphier: Switch to use uart_read_port_properties()
serial: 8250_tegra: Switch to use uart_read_port_properties()
serial: 8250_pxa: Switch to use uart_read_port_properties()
serial: 8250_omap: Switch to use uart_read_port_properties()
serial: 8250_of: Switch to use uart_read_port_properties()
serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
serial: 8250_ingenic: Switch to use uart_read_port_properties()
serial: 8250_dw: Switch to use uart_read_port_properties()
serial: 8250_bcm7271: Switch to use uart_read_port_properties()
serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
serial: port: Introduce a common helper to read properties
serial: core: Add UPIO_UNKNOWN constant for unknown port type
serial: core: Move struct uart_port::quirks closer to possible values
serial: sh-sci: Call sci_serial_{in,out}() directly
serial: core: only stop transmit when HW fifo is empty
serial: pch: Use uart_prepare_sysrq_char().
...
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index e35ad11..2129247 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -55,6 +55,7 @@
allOf:
- $ref: serial.yaml#
+ - $ref: rs485.yaml#
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
index 3a5b59f..3f9ace8 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -30,6 +30,7 @@
- items:
- enum:
- fsl,imx93-lpuart
+ - fsl,imx95-lpuart
- const: fsl,imx8ulp-lpuart
- const: fsl,imx7ulp-lpuart
- items:
diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
index 2046e2d..9480ed3 100644
--- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
@@ -59,6 +59,7 @@
- renesas,hscif-r8a779a0 # R-Car V3U
- renesas,hscif-r8a779f0 # R-Car S4-8
- renesas,hscif-r8a779g0 # R-Car V4H
+ - renesas,hscif-r8a779h0 # R-Car V4M
- const: renesas,rcar-gen4-hscif # R-Car Gen4
- const: renesas,hscif # generic HSCIF compatible UART
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
index 133259e..0f01310 100644
--- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml
+++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
@@ -143,6 +143,8 @@
then:
required:
- samsung,uart-fifosize
+ properties:
+ reg-io-width: false
unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
index 65804ca..ffc9198 100644
--- a/Documentation/devicetree/bindings/serial/serial.yaml
+++ b/Documentation/devicetree/bindings/serial/serial.yaml
@@ -88,7 +88,7 @@
TX FIFO threshold configuration (in bytes).
patternProperties:
- "^(bluetooth|bluetooth-gnss|gnss|gps|mcu)$":
+ "^(bluetooth|bluetooth-gnss|gnss|gps|mcu|onewire)$":
if:
type: object
then:
diff --git a/Documentation/devicetree/bindings/serial/st,asc.yaml b/Documentation/devicetree/bindings/serial/st,asc.yaml
new file mode 100644
index 0000000..f208338
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/st,asc.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/st,asc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi SoCs Serial Port
+
+maintainers:
+ - Patrice Chotard <patrice.chotard@foss.st.com>
+
+allOf:
+ - $ref: serial.yaml#
+
+properties:
+ compatible:
+ const: st,asc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ st,hw-flow-ctrl:
+ description: When set, enable hardware flow control.
+ type: boolean
+
+ st,force-m1:
+ description: When set, force asc to be in Mode-1. This is recommended for
+ high bit rates above 19.2K.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/stih407-clks.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ serial@9830000 {
+ compatible = "st,asc";
+ reg = <0x9830000 0x2c>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index 1df8ffe..62f97da 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -58,6 +58,9 @@
wakeup-source: true
+ power-domains:
+ maxItems: 1
+
rx-threshold:
description:
If value is set to 1, RX FIFO threshold is disabled.
diff --git a/Documentation/devicetree/bindings/serial/st-asc.txt b/Documentation/devicetree/bindings/serial/st-asc.txt
deleted file mode 100644
index a1b9b6f..0000000
--- a/Documentation/devicetree/bindings/serial/st-asc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-*st-asc(Serial Port)
-
-Required properties:
-- compatible : Should be "st,asc".
-- reg, reg-names, interrupts, interrupt-names : Standard way to define device
- resources with names. look in
- Documentation/devicetree/bindings/resource-names.txt
-
-Optional properties:
-- st,hw-flow-ctrl bool flag to enable hardware flow control.
-- st,force-m1 bool flat to force asc to be in Mode-1 recommended
- for high bit rates (above 19.2K)
-Example:
-serial@fe440000{
- compatible = "st,asc";
- reg = <0xfe440000 0x2c>;
- interrupts = <0 209 0>;
-};
diff --git a/Documentation/devicetree/bindings/w1/w1-uart.yaml b/Documentation/devicetree/bindings/w1/w1-uart.yaml
new file mode 100644
index 0000000..bd7c62d
--- /dev/null
+++ b/Documentation/devicetree/bindings/w1/w1-uart.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/w1/w1-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UART 1-Wire Bus
+
+maintainers:
+ - Christoph Winklhofer <cj.winklhofer@gmail.com>
+
+description: |
+ UART 1-wire bus. Utilizes the UART interface via the Serial Device Bus
+ to create the 1-Wire timing patterns.
+
+ The UART peripheral must support full-duplex and operate in open-drain
+ mode. The timing patterns are generated by a specific combination of
+ baud-rate and transmitted byte, which corresponds to a 1-Wire read bit,
+ write bit or reset pulse.
+
+ The default baud-rate for reset and presence detection is 9600 and for
+ a 1-Wire read or write operation 115200. In case the actual baud-rate
+ is different from the requested one, the transmitted byte is adapted
+ to generate the 1-Wire timing patterns.
+
+ https://www.analog.com/en/technical-articles/using-a-uart-to-implement-a-1wire-bus-master.html
+
+properties:
+ compatible:
+ const: w1-uart
+
+ reset-bps:
+ default: 9600
+ description:
+ The baud rate for the 1-Wire reset and presence detect.
+
+ write-0-bps:
+ default: 115200
+ description:
+ The baud rate for the 1-Wire write-0 cycle.
+
+ write-1-bps:
+ default: 115200
+ description:
+ The baud rate for the 1-Wire write-1 and read cycle.
+
+required:
+ - compatible
+
+additionalProperties:
+ type: object
+
+examples:
+ - |
+ serial {
+ onewire {
+ compatible = "w1-uart";
+ };
+ };
diff --git a/Documentation/driver-api/tty/console.rst b/Documentation/driver-api/tty/console.rst
new file mode 100644
index 0000000..4348e36
--- /dev/null
+++ b/Documentation/driver-api/tty/console.rst
@@ -0,0 +1,45 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======
+Console
+=======
+
+.. contents:: :local:
+
+Struct Console
+==============
+
+.. kernel-doc:: include/linux/console.h
+ :identifiers: console cons_flags
+
+Internals
+---------
+
+.. kernel-doc:: include/linux/console.h
+ :identifiers: nbcon_state nbcon_prio nbcon_context nbcon_write_context
+
+Struct Consw
+============
+
+.. kernel-doc:: include/linux/console.h
+ :identifiers: consw
+
+Console functions
+=================
+
+.. kernel-doc:: include/linux/console.h
+ :identifiers: console_srcu_read_flags console_srcu_write_flags
+ console_is_registered for_each_console_srcu for_each_console
+
+.. kernel-doc:: drivers/tty/vt/selection.c
+ :export:
+.. kernel-doc:: drivers/tty/vt/vt.c
+ :export:
+
+Internals
+---------
+
+.. kernel-doc:: drivers/tty/vt/selection.c
+ :internal:
+.. kernel-doc:: drivers/tty/vt/vt.c
+ :internal:
diff --git a/Documentation/driver-api/tty/index.rst b/Documentation/driver-api/tty/index.rst
index b490da1..c1ffe3d 100644
--- a/Documentation/driver-api/tty/index.rst
+++ b/Documentation/driver-api/tty/index.rst
@@ -38,6 +38,7 @@
tty_buffer
tty_ioctl
tty_internals
+ console
Writing TTY Driver
==================
diff --git a/Documentation/w1/masters/index.rst b/Documentation/w1/masters/index.rst
index 4442a98..cc40189 100644
--- a/Documentation/w1/masters/index.rst
+++ b/Documentation/w1/masters/index.rst
@@ -12,3 +12,4 @@
mxc-w1
omap-hdq
w1-gpio
+ w1-uart
diff --git a/Documentation/w1/masters/w1-uart.rst b/Documentation/w1/masters/w1-uart.rst
new file mode 100644
index 0000000..8d0f122
--- /dev/null
+++ b/Documentation/w1/masters/w1-uart.rst
@@ -0,0 +1,54 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+=====================
+Kernel driver w1-uart
+=====================
+
+Author: Christoph Winklhofer <cj.winklhofer@gmail.com>
+
+
+Description
+-----------
+
+UART 1-Wire bus driver. The driver utilizes the UART interface via the
+Serial Device Bus to create the 1-Wire timing patterns as described in
+the document `"Using a UART to Implement a 1-Wire Bus Master"`_.
+
+.. _"Using a UART to Implement a 1-Wire Bus Master": https://www.analog.com/en/technical-articles/using-a-uart-to-implement-a-1wire-bus-master.html
+
+In short, the UART peripheral must support full-duplex and operate in
+open-drain mode. The timing patterns are generated by a specific
+combination of baud-rate and transmitted byte, which corresponds to a
+1-Wire read bit, write bit or reset pulse.
+
+For instance the timing pattern for a 1-Wire reset and presence detect uses
+the baud-rate 9600, i.e. 104.2 us per bit. The transmitted byte 0xf0 over
+UART (least significant bit first, start-bit low) sets the reset low time
+for 1-Wire to 521 us. A present 1-Wire device changes the received byte by
+pulling the line low, which is used by the driver to evaluate the result of
+the 1-Wire operation.
+
+Similar for a 1-Wire read bit or write bit, which uses the baud-rate
+115200, i.e. 8.7 us per bit. The transmitted byte 0x80 is used for a
+Write-0 operation (low time 69.6us) and the byte 0xff for Read-0, Read-1
+and Write-1 (low time 8.7us).
+
+The default baud-rate for reset and presence detection is 9600 and for
+a 1-Wire read or write operation 115200. In case the actual baud-rate
+is different from the requested one, the transmitted byte is adapted
+to generate the 1-Wire timing patterns.
+
+
+Usage
+-----
+
+Specify the UART 1-wire bus in the device tree by adding the single child
+onewire to the serial node (e.g. uart0). For example:
+::
+
+ @uart0 {
+ ...
+ onewire {
+ compatible = "w1-uart";
+ };
+ };
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 7791673..99718f3 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -846,6 +846,6 @@
* The Amiga keyboard driver needs key_maps, but we cannot export it in
* drivers/char/defkeymap.c, as it is autogenerated
*/
-#ifdef CONFIG_HW_CONSOLE
+#ifdef CONFIG_VT
EXPORT_SYMBOL_GPL(key_maps);
#endif
diff --git a/arch/m68k/hp300/config.c b/arch/m68k/hp300/config.c
index e4bd691..1a27398 100644
--- a/arch/m68k/hp300/config.c
+++ b/arch/m68k/hp300/config.c
@@ -10,6 +10,7 @@
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/serial_8250.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/console.h>
@@ -67,9 +68,6 @@
static char hp300_model_name[13] = "HP9000/";
extern void hp300_reset(void);
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-extern int hp300_setup_serial_console(void) __init;
-#endif
int __init hp300_parse_bootinfo(const struct bi_record *record)
{
@@ -263,7 +261,5 @@
} else {
panic("Unknown HP9000 Model");
}
-#ifdef CONFIG_SERIAL_8250_CONSOLE
hp300_setup_serial_console();
-#endif
}
diff --git a/drivers/bluetooth/btmtkuart.c b/drivers/bluetooth/btmtkuart.c
index 3c84fcb..e6bc4a7 100644
--- a/drivers/bluetooth/btmtkuart.c
+++ b/drivers/bluetooth/btmtkuart.c
@@ -383,8 +383,8 @@
}
}
-static ssize_t btmtkuart_receive_buf(struct serdev_device *serdev,
- const u8 *data, size_t count)
+static size_t btmtkuart_receive_buf(struct serdev_device *serdev,
+ const u8 *data, size_t count)
{
struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
index 0b93c2f..9d0c7e2 100644
--- a/drivers/bluetooth/btnxpuart.c
+++ b/drivers/bluetooth/btnxpuart.c
@@ -1285,8 +1285,8 @@
{ NXP_RECV_FW_REQ_V3, .recv = nxp_recv_fw_req_v3 },
};
-static ssize_t btnxpuart_receive_buf(struct serdev_device *serdev,
- const u8 *data, size_t count)
+static size_t btnxpuart_receive_buf(struct serdev_device *serdev,
+ const u8 *data, size_t count)
{
struct btnxpuart_dev *nxpdev = serdev_device_get_drvdata(serdev);
diff --git a/drivers/bluetooth/hci_serdev.c b/drivers/bluetooth/hci_serdev.c
index 214fff8..85c0d9b 100644
--- a/drivers/bluetooth/hci_serdev.c
+++ b/drivers/bluetooth/hci_serdev.c
@@ -271,8 +271,8 @@
*
* Return: number of processed bytes
*/
-static ssize_t hci_uart_receive_buf(struct serdev_device *serdev,
- const u8 *data, size_t count)
+static size_t hci_uart_receive_buf(struct serdev_device *serdev,
+ const u8 *data, size_t count)
{
struct hci_uart *hu = serdev_device_get_drvdata(serdev);
diff --git a/drivers/gnss/serial.c b/drivers/gnss/serial.c
index baa9564..0e43bf6 100644
--- a/drivers/gnss/serial.c
+++ b/drivers/gnss/serial.c
@@ -80,7 +80,7 @@
.write_raw = gnss_serial_write_raw,
};
-static ssize_t gnss_serial_receive_buf(struct serdev_device *serdev,
+static size_t gnss_serial_receive_buf(struct serdev_device *serdev,
const u8 *buf, size_t count)
{
struct gnss_serial *gserial = serdev_device_get_drvdata(serdev);
diff --git a/drivers/gnss/sirf.c b/drivers/gnss/sirf.c
index 6801a8f..79375d1 100644
--- a/drivers/gnss/sirf.c
+++ b/drivers/gnss/sirf.c
@@ -160,7 +160,7 @@
.write_raw = sirf_write_raw,
};
-static ssize_t sirf_receive_buf(struct serdev_device *serdev,
+static size_t sirf_receive_buf(struct serdev_device *serdev,
const u8 *buf, size_t count)
{
struct sirf_data *data = serdev_device_get_drvdata(serdev);
diff --git a/drivers/greybus/gb-beagleplay.c b/drivers/greybus/gb-beagleplay.c
index c3e9002..33f8fad 100644
--- a/drivers/greybus/gb-beagleplay.c
+++ b/drivers/greybus/gb-beagleplay.c
@@ -271,7 +271,7 @@
}
}
-static ssize_t hdlc_rx(struct gb_beagleplay *bg, const u8 *data, size_t count)
+static size_t hdlc_rx(struct gb_beagleplay *bg, const u8 *data, size_t count)
{
size_t i;
u8 c;
@@ -331,8 +331,8 @@
flush_work(&bg->tx_work);
}
-static ssize_t gb_tty_receive(struct serdev_device *sd, const u8 *data,
- size_t count)
+static size_t gb_tty_receive(struct serdev_device *sd, const u8 *data,
+ size_t count)
{
struct gb_beagleplay *bg = serdev_device_get_drvdata(sd);
diff --git a/drivers/iio/chemical/pms7003.c b/drivers/iio/chemical/pms7003.c
index b5cf15a..4302586 100644
--- a/drivers/iio/chemical/pms7003.c
+++ b/drivers/iio/chemical/pms7003.c
@@ -211,8 +211,8 @@
return checksum == pms7003_calc_checksum(frame);
}
-static ssize_t pms7003_receive_buf(struct serdev_device *serdev, const u8 *buf,
- size_t size)
+static size_t pms7003_receive_buf(struct serdev_device *serdev, const u8 *buf,
+ size_t size)
{
struct iio_dev *indio_dev = serdev_device_get_drvdata(serdev);
struct pms7003_state *state = iio_priv(indio_dev);
diff --git a/drivers/iio/chemical/scd30_serial.c b/drivers/iio/chemical/scd30_serial.c
index a476545..2adb76d 100644
--- a/drivers/iio/chemical/scd30_serial.c
+++ b/drivers/iio/chemical/scd30_serial.c
@@ -174,8 +174,8 @@
return 0;
}
-static ssize_t scd30_serdev_receive_buf(struct serdev_device *serdev,
- const u8 *buf, size_t size)
+static size_t scd30_serdev_receive_buf(struct serdev_device *serdev,
+ const u8 *buf, size_t size)
{
struct iio_dev *indio_dev = serdev_device_get_drvdata(serdev);
struct scd30_serdev_priv *priv;
diff --git a/drivers/iio/chemical/sps30_serial.c b/drivers/iio/chemical/sps30_serial.c
index 3afa89f..a6dfbe2 100644
--- a/drivers/iio/chemical/sps30_serial.c
+++ b/drivers/iio/chemical/sps30_serial.c
@@ -210,8 +210,8 @@
return rsp_size;
}
-static ssize_t sps30_serial_receive_buf(struct serdev_device *serdev,
- const u8 *buf, size_t size)
+static size_t sps30_serial_receive_buf(struct serdev_device *serdev,
+ const u8 *buf, size_t size)
{
struct iio_dev *indio_dev = dev_get_drvdata(&serdev->dev);
struct sps30_serial_priv *priv;
diff --git a/drivers/iio/imu/bno055/bno055_ser_core.c b/drivers/iio/imu/bno055/bno055_ser_core.c
index 5677bdf..694ff14 100644
--- a/drivers/iio/imu/bno055/bno055_ser_core.c
+++ b/drivers/iio/imu/bno055/bno055_ser_core.c
@@ -378,8 +378,8 @@
* Also, we assume to RX one pkt per time (i.e. the HW doesn't send anything
* unless we require to AND we don't queue more than one request per time).
*/
-static ssize_t bno055_ser_receive_buf(struct serdev_device *serdev,
- const u8 *buf, size_t size)
+static size_t bno055_ser_receive_buf(struct serdev_device *serdev,
+ const u8 *buf, size_t size)
{
int status;
struct bno055_ser_priv *priv = serdev_device_get_drvdata(serdev);
diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c
index e305c44..ecfae0b 100644
--- a/drivers/input/keyboard/amikbd.c
+++ b/drivers/input/keyboard/amikbd.c
@@ -26,7 +26,7 @@
MODULE_DESCRIPTION("Amiga keyboard driver");
MODULE_LICENSE("GPL");
-#ifdef CONFIG_HW_CONSOLE
+#ifdef CONFIG_VT
static unsigned char amikbd_keycode[0x78] __initdata = {
[0] = KEY_GRAVE,
[1] = KEY_1,
@@ -148,9 +148,9 @@
memcpy(key_maps[i], temp_map, sizeof(temp_map));
}
}
-#else /* !CONFIG_HW_CONSOLE */
+#else /* !CONFIG_VT */
static inline void amikbd_init_console_keymaps(void) {}
-#endif /* !CONFIG_HW_CONSOLE */
+#endif /* !CONFIG_VT */
static const char *amikbd_messages[8] = {
[0] = KERN_ALERT "amikbd: Ctrl-Amiga-Amiga reset warning!!\n",
diff --git a/drivers/mfd/rave-sp.c b/drivers/mfd/rave-sp.c
index ea5fbcb..ef326d6 100644
--- a/drivers/mfd/rave-sp.c
+++ b/drivers/mfd/rave-sp.c
@@ -471,8 +471,8 @@
rave_sp_receive_reply(sp, data, length);
}
-static ssize_t rave_sp_receive_buf(struct serdev_device *serdev,
- const u8 *buf, size_t size)
+static size_t rave_sp_receive_buf(struct serdev_device *serdev,
+ const u8 *buf, size_t size)
{
struct device *dev = &serdev->dev;
struct rave_sp *sp = dev_get_drvdata(dev);
diff --git a/drivers/net/ethernet/qualcomm/qca_uart.c b/drivers/net/ethernet/qualcomm/qca_uart.c
index 321fd8d..37efb1e 100644
--- a/drivers/net/ethernet/qualcomm/qca_uart.c
+++ b/drivers/net/ethernet/qualcomm/qca_uart.c
@@ -45,7 +45,7 @@
unsigned char *tx_buffer;
};
-static ssize_t
+static size_t
qca_tty_receive(struct serdev_device *serdev, const u8 *data, size_t count)
{
struct qcauart *qca = serdev_device_get_drvdata(serdev);
diff --git a/drivers/nfc/pn533/uart.c b/drivers/nfc/pn533/uart.c
index 2eb5978..cfbbe07 100644
--- a/drivers/nfc/pn533/uart.c
+++ b/drivers/nfc/pn533/uart.c
@@ -203,8 +203,8 @@
return 0;
}
-static ssize_t pn532_receive_buf(struct serdev_device *serdev,
- const u8 *data, size_t count)
+static size_t pn532_receive_buf(struct serdev_device *serdev,
+ const u8 *data, size_t count)
{
struct pn532_uart_phy *dev = serdev_device_get_drvdata(serdev);
size_t i;
diff --git a/drivers/nfc/s3fwrn5/uart.c b/drivers/nfc/s3fwrn5/uart.c
index 456d394..9c09c10 100644
--- a/drivers/nfc/s3fwrn5/uart.c
+++ b/drivers/nfc/s3fwrn5/uart.c
@@ -51,8 +51,8 @@
.write = s3fwrn82_uart_write,
};
-static ssize_t s3fwrn82_uart_read(struct serdev_device *serdev,
- const u8 *data, size_t count)
+static size_t s3fwrn82_uart_read(struct serdev_device *serdev,
+ const u8 *data, size_t count)
{
struct s3fwrn82_uart_phy *phy = serdev_device_get_drvdata(serdev);
size_t i;
diff --git a/drivers/platform/chrome/cros_ec_uart.c b/drivers/platform/chrome/cros_ec_uart.c
index 68d8055..8ea867c 100644
--- a/drivers/platform/chrome/cros_ec_uart.c
+++ b/drivers/platform/chrome/cros_ec_uart.c
@@ -81,8 +81,8 @@
struct response_info response;
};
-static ssize_t cros_ec_uart_rx_bytes(struct serdev_device *serdev,
- const u8 *data, size_t count)
+static size_t cros_ec_uart_rx_bytes(struct serdev_device *serdev,
+ const u8 *data, size_t count)
{
struct ec_host_response *host_response;
struct cros_ec_device *ec_dev = serdev_device_get_drvdata(serdev);
diff --git a/drivers/platform/surface/aggregator/core.c b/drivers/platform/surface/aggregator/core.c
index 9591a28..ba550ea 100644
--- a/drivers/platform/surface/aggregator/core.c
+++ b/drivers/platform/surface/aggregator/core.c
@@ -227,8 +227,8 @@
/* -- Glue layer (serdev_device -> ssam_controller). ------------------------ */
-static ssize_t ssam_receive_buf(struct serdev_device *dev, const u8 *buf,
- size_t n)
+static size_t ssam_receive_buf(struct serdev_device *dev, const u8 *buf,
+ size_t n)
{
struct ssam_controller *ctrl;
int ret;
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 5646dc6..a45d423 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -75,14 +75,9 @@
def_bool y
depends on VT_CONSOLE && PM_SLEEP
-config HW_CONSOLE
- bool
- depends on VT
- default y
-
config VT_HW_CONSOLE_BINDING
bool "Support for binding and unbinding console drivers"
- depends on HW_CONSOLE
+ depends on VT
help
The virtual terminal is the device that interacts with the physical
terminal through console drivers. On these systems, at least one
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 7716ce0..e273606 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1566,7 +1566,7 @@
return error;
}
-static int __exit amiga_serial_remove(struct platform_device *pdev)
+static void __exit amiga_serial_remove(struct platform_device *pdev)
{
struct serial_state *state = platform_get_drvdata(pdev);
@@ -1576,12 +1576,10 @@
free_irq(IRQ_AMIGA_TBE, state);
free_irq(IRQ_AMIGA_RBF, state);
-
- return 0;
}
static struct platform_driver amiga_serial_driver = {
- .remove = __exit_p(amiga_serial_remove),
+ .remove_new = __exit_p(amiga_serial_remove),
.driver = {
.name = "amiga-serial",
},
diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c
index d27979e..34421ec 100644
--- a/drivers/tty/goldfish.c
+++ b/drivers/tty/goldfish.c
@@ -408,7 +408,7 @@
return ret;
}
-static int goldfish_tty_remove(struct platform_device *pdev)
+static void goldfish_tty_remove(struct platform_device *pdev)
{
struct goldfish_tty *qtty = platform_get_drvdata(pdev);
@@ -424,7 +424,6 @@
if (goldfish_tty_current_line_count == 0)
goldfish_tty_delete_driver();
mutex_unlock(&goldfish_tty_lock);
- return 0;
}
#ifdef CONFIG_GOLDFISH_TTY_EARLY_CONSOLE
@@ -462,7 +461,7 @@
static struct platform_driver goldfish_tty_platform_driver = {
.probe = goldfish_tty_probe,
- .remove = goldfish_tty_remove,
+ .remove_new = goldfish_tty_remove,
.driver = {
.name = "goldfish_tty",
.of_match_table = goldfish_tty_of_match,
diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c
index fdecc0d..b1149bc 100644
--- a/drivers/tty/hvc/hvc_iucv.c
+++ b/drivers/tty/hvc/hvc_iucv.c
@@ -1035,6 +1035,10 @@
NULL,
};
+static void hvc_iucv_free(struct device *data)
+{
+ kfree(data);
+}
/**
* hvc_iucv_alloc() - Allocates a new struct hvc_iucv_private instance
@@ -1097,7 +1101,7 @@
priv->dev->bus = &iucv_bus;
priv->dev->parent = iucv_root;
priv->dev->groups = hvc_iucv_dev_attr_groups;
- priv->dev->release = (void (*)(struct device *)) kfree;
+ priv->dev->release = hvc_iucv_free;
rc = device_register(priv->dev);
if (rc) {
put_device(priv->dev);
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index 822a5cd..613cb35 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -431,7 +431,7 @@
dev_pm_domain_detach(dev, true);
}
-static struct bus_type serdev_bus_type = {
+static const struct bus_type serdev_bus_type = {
.name = "serial",
.match = serdev_device_match,
.probe = serdev_drv_probe,
diff --git a/drivers/tty/serdev/serdev-ttyport.c b/drivers/tty/serdev/serdev-ttyport.c
index e94e090..3d7ae7f 100644
--- a/drivers/tty/serdev/serdev-ttyport.c
+++ b/drivers/tty/serdev/serdev-ttyport.c
@@ -27,19 +27,17 @@
{
struct serdev_controller *ctrl = port->client_data;
struct serport *serport = serdev_controller_get_drvdata(ctrl);
- int ret;
+ size_t ret;
if (!test_bit(SERPORT_ACTIVE, &serport->flags))
return 0;
ret = serdev_controller_receive_buf(ctrl, cp, count);
- dev_WARN_ONCE(&ctrl->dev, ret < 0 || ret > count,
- "receive_buf returns %d (count = %zu)\n",
+ dev_WARN_ONCE(&ctrl->dev, ret > count,
+ "receive_buf returns %zu (count = %zu)\n",
ret, count);
- if (ret < 0)
- return 0;
- else if (ret > count)
+ if (ret > count)
return count;
return ret;
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 8c2aaf7..53d8eee 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -419,8 +419,8 @@
struct aspeed_vuart *vuart;
struct device_node *np;
struct resource *res;
- u32 clk, prop, sirq[2];
int rc, sirq_polarity;
+ u32 prop, sirq[2];
struct clk *vclk;
np = pdev->dev.of_node;
@@ -447,53 +447,35 @@
port.port.status = UPSTAT_SYNC_FIFO;
port.port.dev = &pdev->dev;
port.port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE);
+ port.port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_FIXED_PORT | UPF_FIXED_TYPE |
+ UPF_NO_THRE_TEST;
port.bugs |= UART_BUG_TXRACE;
rc = sysfs_create_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
if (rc < 0)
return rc;
- if (of_property_read_u32(np, "clock-frequency", &clk)) {
+ rc = uart_read_port_properties(&port.port);
+ if (rc)
+ goto err_sysfs_remove;
+
+ /* Get clk rate through clk driver if present */
+ if (!port.port.uartclk) {
vclk = devm_clk_get_enabled(dev, NULL);
if (IS_ERR(vclk)) {
rc = dev_err_probe(dev, PTR_ERR(vclk), "clk or clock-frequency not defined\n");
goto err_sysfs_remove;
}
- clk = clk_get_rate(vclk);
+ port.port.uartclk = clk_get_rate(vclk);
}
/* If current-speed was set, then try not to change it. */
if (of_property_read_u32(np, "current-speed", &prop) == 0)
- port.port.custom_divisor = clk / (16 * prop);
+ port.port.custom_divisor = port.port.uartclk / (16 * prop);
- /* Check for shifted address mapping */
- if (of_property_read_u32(np, "reg-offset", &prop) == 0)
- port.port.mapbase += prop;
-
- /* Check for registers offset within the devices address range */
- if (of_property_read_u32(np, "reg-shift", &prop) == 0)
- port.port.regshift = prop;
-
- /* Check for fifo size */
- if (of_property_read_u32(np, "fifo-size", &prop) == 0)
- port.port.fifosize = prop;
-
- /* Check for a fixed line number */
- rc = of_alias_get_id(np, "serial");
- if (rc >= 0)
- port.port.line = rc;
-
- port.port.irq = irq_of_parse_and_map(np, 0);
port.port.handle_irq = aspeed_vuart_handle_irq;
- port.port.iotype = UPIO_MEM;
port.port.type = PORT_ASPEED_VUART;
- port.port.uartclk = clk;
- port.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
- | UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_NO_THRE_TEST;
-
- if (of_property_read_bool(np, "no-loopback-test"))
- port.port.flags |= UPF_SKIP_TEST;
if (port.port.fifosize)
port.capabilities = UART_CAP_FIFO;
@@ -503,7 +485,7 @@
rc = serial8250_register_8250_port(&port);
if (rc < 0)
- goto err_clk_disable;
+ goto err_sysfs_remove;
vuart->line = rc;
vuart->port = serial8250_get_port(vuart->line);
@@ -529,7 +511,7 @@
rc = aspeed_vuart_set_lpc_address(vuart, prop);
if (rc < 0) {
dev_err_probe(dev, rc, "invalid value in aspeed,lpc-io-reg property\n");
- goto err_clk_disable;
+ goto err_sysfs_remove;
}
rc = of_property_read_u32_array(np, "aspeed,lpc-interrupts", sirq, 2);
@@ -541,14 +523,14 @@
rc = aspeed_vuart_set_sirq(vuart, sirq[0]);
if (rc < 0) {
dev_err_probe(dev, rc, "invalid sirq number in aspeed,lpc-interrupts property\n");
- goto err_clk_disable;
+ goto err_sysfs_remove;
}
sirq_polarity = aspeed_vuart_map_irq_polarity(sirq[1]);
if (sirq_polarity < 0) {
rc = dev_err_probe(dev, sirq_polarity,
"invalid sirq polarity in aspeed,lpc-interrupts property\n");
- goto err_clk_disable;
+ goto err_sysfs_remove;
}
aspeed_vuart_set_sirq_polarity(vuart, sirq_polarity);
@@ -559,8 +541,6 @@
return 0;
-err_clk_disable:
- irq_dispose_mapping(port.port.irq);
err_sysfs_remove:
sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
return rc;
diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c
index beac6b3..121a5ce 100644
--- a/drivers/tty/serial/8250/8250_bcm2835aux.c
+++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
@@ -45,10 +45,6 @@
u32 cntl;
};
-struct bcm2835_aux_serial_driver_data {
- resource_size_t offset;
-};
-
static void bcm2835aux_rs485_start_tx(struct uart_8250_port *up)
{
if (!(up->port.rs485.flags & SER_RS485_RX_DURING_TX)) {
@@ -85,10 +81,9 @@
static int bcm2835aux_serial_probe(struct platform_device *pdev)
{
- const struct bcm2835_aux_serial_driver_data *bcm_data;
+ const struct software_node *bcm2835_swnode;
struct uart_8250_port up = { };
struct bcm2835aux_data *data;
- resource_size_t offset = 0;
struct resource *res;
unsigned int uartclk;
int ret;
@@ -101,12 +96,8 @@
/* initialize data */
up.capabilities = UART_CAP_FIFO | UART_CAP_MINI;
up.port.dev = &pdev->dev;
- up.port.regshift = 2;
up.port.type = PORT_16550;
- up.port.iotype = UPIO_MEM;
- up.port.fifosize = 8;
- up.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE |
- UPF_SKIP_TEST | UPF_IOREMAP;
+ up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SKIP_TEST | UPF_IOREMAP;
up.port.rs485_config = serial8250_em485_config;
up.port.rs485_supported = serial8250_em485_supported;
up.rs485_start_tx = bcm2835aux_rs485_start_tx;
@@ -122,12 +113,6 @@
if (IS_ERR(data->clk))
return dev_err_probe(&pdev->dev, PTR_ERR(data->clk), "could not get clk\n");
- /* get the interrupt */
- ret = platform_get_irq(pdev, 0);
- if (ret < 0)
- return ret;
- up.port.irq = ret;
-
/* map the main registers */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
@@ -135,52 +120,40 @@
return -EINVAL;
}
- bcm_data = device_get_match_data(&pdev->dev);
+ up.port.mapbase = res->start;
+ up.port.mapsize = resource_size(res);
- /* Some UEFI implementations (e.g. tianocore/edk2 for the Raspberry Pi)
- * describe the miniuart with a base address that encompasses the auxiliary
- * registers shared between the miniuart and spi.
- *
- * This is due to historical reasons, see discussion here :
- * https://edk2.groups.io/g/devel/topic/87501357#84349
- *
- * We need to add the offset between the miniuart and auxiliary
- * registers to get the real miniuart base address.
- */
- if (bcm_data)
- offset = bcm_data->offset;
+ bcm2835_swnode = device_get_match_data(&pdev->dev);
+ if (bcm2835_swnode) {
+ ret = device_add_software_node(&pdev->dev, bcm2835_swnode);
+ if (ret)
+ return ret;
+ }
- up.port.mapbase = res->start + offset;
- up.port.mapsize = resource_size(res) - offset;
+ ret = uart_read_port_properties(&up.port);
+ if (ret)
+ goto rm_swnode;
- /* Check for a fixed line number */
- ret = of_alias_get_id(pdev->dev.of_node, "serial");
- if (ret >= 0)
- up.port.line = ret;
+ up.port.regshift = 2;
+ up.port.fifosize = 8;
/* enable the clock as a last step */
ret = clk_prepare_enable(data->clk);
if (ret) {
- dev_err(&pdev->dev, "unable to enable uart clock - %d\n",
- ret);
- return ret;
+ dev_err_probe(&pdev->dev, ret, "unable to enable uart clock\n");
+ goto rm_swnode;
}
uartclk = clk_get_rate(data->clk);
- if (!uartclk) {
- ret = device_property_read_u32(&pdev->dev, "clock-frequency", &uartclk);
- if (ret) {
- dev_err_probe(&pdev->dev, ret, "could not get clk rate\n");
- goto dis_clk;
- }
- }
+ if (uartclk)
+ up.port.uartclk = uartclk;
/* the HW-clock divider for bcm2835aux is 8,
* but 8250 expects a divider of 16,
* so we have to multiply the actual clock by 2
* to get identical baudrates.
*/
- up.port.uartclk = uartclk * 2;
+ up.port.uartclk *= 2;
/* register the port */
ret = serial8250_register_8250_port(&up);
@@ -194,6 +167,8 @@
dis_clk:
clk_disable_unprepare(data->clk);
+rm_swnode:
+ device_remove_software_node(&pdev->dev);
return ret;
}
@@ -203,10 +178,27 @@
serial8250_unregister_port(data->line);
clk_disable_unprepare(data->clk);
+ device_remove_software_node(&pdev->dev);
}
-static const struct bcm2835_aux_serial_driver_data bcm2835_acpi_data = {
- .offset = 0x40,
+/*
+ * Some UEFI implementations (e.g. tianocore/edk2 for the Raspberry Pi)
+ * describe the miniuart with a base address that encompasses the auxiliary
+ * registers shared between the miniuart and spi.
+ *
+ * This is due to historical reasons, see discussion here:
+ * https://edk2.groups.io/g/devel/topic/87501357#84349
+ *
+ * We need to add the offset between the miniuart and auxiliary registers
+ * to get the real miniuart base address.
+ */
+static const struct property_entry bcm2835_acpi_properties[] = {
+ PROPERTY_ENTRY_U32("reg-offset", 0x40),
+ { }
+};
+
+static const struct software_node bcm2835_acpi_node = {
+ .properties = bcm2835_acpi_properties,
};
static const struct of_device_id bcm2835aux_serial_match[] = {
@@ -216,7 +208,7 @@
MODULE_DEVICE_TABLE(of, bcm2835aux_serial_match);
static const struct acpi_device_id bcm2835aux_serial_acpi_match[] = {
- { "BCM2836", (kernel_ulong_t)&bcm2835_acpi_data },
+ { "BCM2836", (kernel_ulong_t)&bcm2835_acpi_node },
{ }
};
MODULE_DEVICE_TABLE(acpi, bcm2835aux_serial_acpi_match);
diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c
index 504c4c0..5daa38d 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -22,6 +22,7 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/debugfs.h>
+#include <linux/units.h>
#include "8250.h"
@@ -187,21 +188,19 @@
#define TX_BUF_SIZE 4096
#define RX_BUF_SIZE 4096
#define RX_BUFS_COUNT 2
-#define KHZ 1000
-#define MHZ(x) ((x) * KHZ * KHZ)
static const u32 brcmstb_rate_table[] = {
- MHZ(81),
- MHZ(108),
- MHZ(64), /* Actually 64285715 for some chips */
- MHZ(48),
+ 81 * HZ_PER_MHZ,
+ 108 * HZ_PER_MHZ,
+ 64 * HZ_PER_MHZ, /* Actually 64285715 for some chips */
+ 48 * HZ_PER_MHZ,
};
static const u32 brcmstb_rate_table_7278[] = {
- MHZ(81),
- MHZ(108),
+ 81 * HZ_PER_MHZ,
+ 108 * HZ_PER_MHZ,
0,
- MHZ(48),
+ 48 * HZ_PER_MHZ,
};
struct brcmuart_priv {
@@ -936,17 +935,14 @@
static int brcmuart_probe(struct platform_device *pdev)
{
struct resource *regs;
- struct device_node *np = pdev->dev.of_node;
const struct of_device_id *of_id = NULL;
struct uart_8250_port *new_port;
struct device *dev = &pdev->dev;
struct brcmuart_priv *priv;
struct clk *baud_mux_clk;
struct uart_8250_port up;
- int irq;
void __iomem *membase = NULL;
resource_size_t mapbase = 0;
- u32 clk_rate = 0;
int ret;
int x;
int dma_irq;
@@ -954,15 +950,12 @@
"uart", "dma_rx", "dma_tx", "dma_intr2", "dma_arb"
};
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
priv = devm_kzalloc(dev, sizeof(struct brcmuart_priv),
GFP_KERNEL);
if (!priv)
return -ENOMEM;
- of_id = of_match_node(brcmuart_dt_ids, np);
+ of_id = of_match_node(brcmuart_dt_ids, dev->of_node);
if (!of_id || !of_id->data)
priv->rate_table = brcmstb_rate_table;
else
@@ -1012,7 +1005,23 @@
}
}
- of_property_read_u32(np, "clock-frequency", &clk_rate);
+ dev_dbg(dev, "DMA is %senabled\n", priv->dma_enabled ? "" : "not ");
+
+ memset(&up, 0, sizeof(up));
+ up.port.type = PORT_BCM7271;
+ up.port.dev = dev;
+ up.port.mapbase = mapbase;
+ up.port.membase = membase;
+ up.port.handle_irq = brcmuart_handle_irq;
+ up.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_FIXED_TYPE;
+ up.port.private_data = priv;
+
+ ret = uart_read_port_properties(&up.port);
+ if (ret)
+ goto release_dma;
+
+ up.port.regshift = 2;
+ up.port.iotype = device_is_big_endian(dev) ? UPIO_MEM32BE : UPIO_MEM32;
/* See if a Baud clock has been specified */
baud_mux_clk = devm_clk_get_optional_enabled(dev, "sw_baud");
@@ -1024,39 +1033,11 @@
priv->baud_mux_clk = baud_mux_clk;
init_real_clk_rates(dev, priv);
- clk_rate = priv->default_mux_rate;
+ up.port.uartclk = priv->default_mux_rate;
} else {
dev_dbg(dev, "BAUD MUX clock not specified\n");
}
- if (clk_rate == 0) {
- ret = dev_err_probe(dev, -EINVAL, "clock-frequency or clk not defined\n");
- goto release_dma;
- }
-
- dev_dbg(dev, "DMA is %senabled\n", priv->dma_enabled ? "" : "not ");
-
- memset(&up, 0, sizeof(up));
- up.port.type = PORT_BCM7271;
- up.port.uartclk = clk_rate;
- up.port.dev = dev;
- up.port.mapbase = mapbase;
- up.port.membase = membase;
- up.port.irq = irq;
- up.port.handle_irq = brcmuart_handle_irq;
- up.port.regshift = 2;
- up.port.iotype = of_device_is_big_endian(np) ?
- UPIO_MEM32BE : UPIO_MEM32;
- up.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF
- | UPF_FIXED_PORT | UPF_FIXED_TYPE;
- up.port.dev = dev;
- up.port.private_data = priv;
-
- /* Check for a fixed line number */
- ret = of_alias_get_id(np, "serial");
- if (ret >= 0)
- up.port.line = ret;
-
/* setup HR timer */
hrtimer_init(&priv->hrt, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
priv->hrt.function = brcmuart_hrtimer_func;
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index c1d43f0..a3acbf0f5 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -9,7 +9,6 @@
* LCR is written whilst busy. If it is, then a busy detect interrupt is
* raised, the LCR needs to be rewritten and the uart status register read.
*/
-#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
@@ -17,7 +16,6 @@
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/notifier.h>
-#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
@@ -56,6 +54,7 @@
#define DW_UART_QUIRK_ARMADA_38X BIT(1)
#define DW_UART_QUIRK_SKIP_SET_RATE BIT(2)
#define DW_UART_QUIRK_IS_DMA_FC BIT(3)
+#define DW_UART_QUIRK_APMC0D08 BIT(4)
static inline struct dw8250_data *clk_to_dw8250_data(struct notifier_block *nb)
{
@@ -445,44 +444,29 @@
static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
{
- struct device_node *np = p->dev->of_node;
+ unsigned int quirks = data->pdata ? data->pdata->quirks : 0;
- if (np) {
- unsigned int quirks = data->pdata->quirks;
- int id;
-
- /* get index of serial line, if found in DT aliases */
- id = of_alias_get_id(np, "serial");
- if (id >= 0)
- p->line = id;
#ifdef CONFIG_64BIT
- if (quirks & DW_UART_QUIRK_OCTEON) {
- p->serial_in = dw8250_serial_inq;
- p->serial_out = dw8250_serial_outq;
- p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
- p->type = PORT_OCTEON;
- data->skip_autocfg = true;
- }
+ if (quirks & DW_UART_QUIRK_OCTEON) {
+ p->serial_in = dw8250_serial_inq;
+ p->serial_out = dw8250_serial_outq;
+ p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
+ p->type = PORT_OCTEON;
+ data->skip_autocfg = true;
+ }
#endif
- if (of_device_is_big_endian(np)) {
- p->iotype = UPIO_MEM32BE;
- p->serial_in = dw8250_serial_in32be;
- p->serial_out = dw8250_serial_out32be;
- }
-
- if (quirks & DW_UART_QUIRK_ARMADA_38X)
- p->serial_out = dw8250_serial_out38x;
- if (quirks & DW_UART_QUIRK_SKIP_SET_RATE)
- p->set_termios = dw8250_do_set_termios;
- if (quirks & DW_UART_QUIRK_IS_DMA_FC) {
- data->data.dma.txconf.device_fc = 1;
- data->data.dma.rxconf.device_fc = 1;
- data->data.dma.prepare_tx_dma = dw8250_prepare_tx_dma;
- data->data.dma.prepare_rx_dma = dw8250_prepare_rx_dma;
- }
-
- } else if (acpi_dev_present("APMC0D08", NULL, -1)) {
+ if (quirks & DW_UART_QUIRK_ARMADA_38X)
+ p->serial_out = dw8250_serial_out38x;
+ if (quirks & DW_UART_QUIRK_SKIP_SET_RATE)
+ p->set_termios = dw8250_do_set_termios;
+ if (quirks & DW_UART_QUIRK_IS_DMA_FC) {
+ data->data.dma.txconf.device_fc = 1;
+ data->data.dma.rxconf.device_fc = 1;
+ data->data.dma.prepare_tx_dma = dw8250_prepare_tx_dma;
+ data->data.dma.prepare_rx_dma = dw8250_prepare_rx_dma;
+ }
+ if (quirks & DW_UART_QUIRK_APMC0D08) {
p->iotype = UPIO_MEM32;
p->regshift = 2;
p->serial_in = dw8250_serial_in32;
@@ -510,39 +494,21 @@
struct device *dev = &pdev->dev;
struct dw8250_data *data;
struct resource *regs;
- int irq;
int err;
- u32 val;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!regs)
return dev_err_probe(dev, -EINVAL, "no registers defined\n");
- irq = platform_get_irq_optional(pdev, 0);
- /* no interrupt -> fall back to polling */
- if (irq == -ENXIO)
- irq = 0;
- if (irq < 0)
- return irq;
-
spin_lock_init(&p->lock);
- p->mapbase = regs->start;
- p->irq = irq;
p->handle_irq = dw8250_handle_irq;
p->pm = dw8250_do_pm;
p->type = PORT_8250;
- p->flags = UPF_SHARE_IRQ | UPF_FIXED_PORT;
+ p->flags = UPF_FIXED_PORT;
p->dev = dev;
- p->iotype = UPIO_MEM;
- p->serial_in = dw8250_serial_in;
- p->serial_out = dw8250_serial_out;
p->set_ldisc = dw8250_set_ldisc;
p->set_termios = dw8250_set_termios;
- p->membase = devm_ioremap(dev, regs->start, resource_size(regs));
- if (!p->membase)
- return -ENOMEM;
-
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -554,15 +520,35 @@
data->uart_16550_compatible = device_property_read_bool(dev,
"snps,uart-16550-compatible");
- err = device_property_read_u32(dev, "reg-shift", &val);
- if (!err)
- p->regshift = val;
+ p->mapbase = regs->start;
+ p->mapsize = resource_size(regs);
- err = device_property_read_u32(dev, "reg-io-width", &val);
- if (!err && val == 4) {
- p->iotype = UPIO_MEM32;
+ p->membase = devm_ioremap(dev, p->mapbase, p->mapsize);
+ if (!p->membase)
+ return -ENOMEM;
+
+ err = uart_read_port_properties(p);
+ /* no interrupt -> fall back to polling */
+ if (err == -ENXIO)
+ err = 0;
+ if (err)
+ return err;
+
+ switch (p->iotype) {
+ case UPIO_MEM:
+ p->serial_in = dw8250_serial_in;
+ p->serial_out = dw8250_serial_out;
+ break;
+ case UPIO_MEM32:
p->serial_in = dw8250_serial_in32;
p->serial_out = dw8250_serial_out32;
+ break;
+ case UPIO_MEM32BE:
+ p->serial_in = dw8250_serial_in32be;
+ p->serial_out = dw8250_serial_out32be;
+ break;
+ default:
+ return -ENODEV;
}
if (device_property_read_bool(dev, "dcd-override")) {
@@ -589,15 +575,13 @@
data->msr_mask_off |= UART_MSR_TERI;
}
- /* Always ask for fixed clock rate from a property. */
- device_property_read_u32(dev, "clock-frequency", &p->uartclk);
-
/* If there is separate baudclk, get the rate from it. */
data->clk = devm_clk_get_optional_enabled(dev, "baudclk");
if (data->clk == NULL)
data->clk = devm_clk_get_optional_enabled(dev, NULL);
if (IS_ERR(data->clk))
- return PTR_ERR(data->clk);
+ return dev_err_probe(dev, PTR_ERR(data->clk),
+ "failed to get baudclk\n");
INIT_WORK(&data->clk_work, dw8250_clk_work_cb);
data->clk_notifier.notifier_call = dw8250_clk_notifier_cb;
@@ -762,13 +746,18 @@
};
MODULE_DEVICE_TABLE(of, dw8250_of_match);
+static const struct dw8250_platform_data dw8250_apmc0d08 = {
+ .usr_reg = DW_UART_USR,
+ .quirks = DW_UART_QUIRK_APMC0D08,
+};
+
static const struct acpi_device_id dw8250_acpi_match[] = {
{ "80860F0A", (kernel_ulong_t)&dw8250_dw_apb },
{ "8086228A", (kernel_ulong_t)&dw8250_dw_apb },
{ "AMD0020", (kernel_ulong_t)&dw8250_dw_apb },
{ "AMDI0020", (kernel_ulong_t)&dw8250_dw_apb },
{ "AMDI0022", (kernel_ulong_t)&dw8250_dw_apb },
- { "APMC0D08", (kernel_ulong_t)&dw8250_dw_apb},
+ { "APMC0D08", (kernel_ulong_t)&dw8250_apmc0d08 },
{ "BRCM2032", (kernel_ulong_t)&dw8250_dw_apb },
{ "HISI0031", (kernel_ulong_t)&dw8250_dw_apb },
{ "INT33C4", (kernel_ulong_t)&dw8250_dw_apb },
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 23366f8..0440df7de1 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -6,23 +6,29 @@
*
* Copyright (C) 2017 Sudip Mukherjee, All Rights Reserved.
*/
-#include <linux/acpi.h>
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/device.h>
#include <linux/dmi.h>
+#include <linux/interrupt.h>
#include <linux/io.h>
-#include <linux/kernel.h>
+#include <linux/math.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
#include <linux/property.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/tty.h>
-#include <linux/delay.h>
#include <asm/byteorder.h>
#include "8250.h"
+#include "8250_pcilib.h"
#define PCI_DEVICE_ID_ACCESSIO_COM_2S 0x1052
#define PCI_DEVICE_ID_ACCESSIO_COM_4S 0x105d
@@ -229,13 +235,12 @@
struct uart_8250_port *port)
{
const struct exar8250_board *board = priv->board;
- unsigned int bar = 0;
unsigned char status;
+ int err;
- port->port.iotype = UPIO_MEM;
- port->port.mapbase = pci_resource_start(pcidev, bar) + offset;
- port->port.membase = priv->virt + offset;
- port->port.regshift = board->reg_shift;
+ err = serial8250_pci_setup_port(pcidev, port, 0, offset, board->reg_shift);
+ if (err)
+ return err;
/*
* XR17V35x UARTs have an extra divisor register, DLD that gets enabled
@@ -375,7 +380,7 @@
return NULL;
pdev->dev.parent = &pcidev->dev;
- ACPI_COMPANION_SET(&pdev->dev, ACPI_COMPANION(&pcidev->dev));
+ device_set_node(&pdev->dev, dev_fwnode(&pcidev->dev));
if (device_add_software_node(&pdev->dev, node) < 0 ||
platform_device_add(pdev) < 0) {
@@ -713,14 +718,14 @@
uart.port.irq = pci_irq_vector(pcidev, 0);
uart.port.dev = &pcidev->dev;
+ /* Clear interrupts */
+ exar_misc_clear(priv);
+
rc = devm_request_irq(&pcidev->dev, uart.port.irq, exar_misc_handler,
IRQF_SHARED, "exar_uart", priv);
if (rc)
return rc;
- /* Clear interrupts */
- exar_misc_clear(priv);
-
for (i = 0; i < nr_ports && i < maxnr; i++) {
rc = board->setup(priv, pcidev, &uart, i);
if (rc) {
@@ -753,28 +758,24 @@
for (i = 0; i < priv->nr; i++)
serial8250_unregister_port(priv->line[i]);
+ /* Ensure that every init quirk is properly torn down */
if (priv->board->exit)
priv->board->exit(pcidev);
}
-static int __maybe_unused exar_suspend(struct device *dev)
+static int exar_suspend(struct device *dev)
{
- struct pci_dev *pcidev = to_pci_dev(dev);
- struct exar8250 *priv = pci_get_drvdata(pcidev);
+ struct exar8250 *priv = dev_get_drvdata(dev);
unsigned int i;
for (i = 0; i < priv->nr; i++)
if (priv->line[i] >= 0)
serial8250_suspend_port(priv->line[i]);
- /* Ensure that every init quirk is properly torn down */
- if (priv->board->exit)
- priv->board->exit(pcidev);
-
return 0;
}
-static int __maybe_unused exar_resume(struct device *dev)
+static int exar_resume(struct device *dev)
{
struct exar8250 *priv = dev_get_drvdata(dev);
unsigned int i;
@@ -788,7 +789,7 @@
return 0;
}
-static SIMPLE_DEV_PM_OPS(exar_pci_pm, exar_suspend, exar_resume);
+static DEFINE_SIMPLE_DEV_PM_OPS(exar_pci_pm, exar_suspend, exar_resume);
static const struct exar8250_board pbn_fastcom335_2 = {
.num_ports = 2,
@@ -938,12 +939,13 @@
.probe = exar_pci_probe,
.remove = exar_pci_remove,
.driver = {
- .pm = &exar_pci_pm,
+ .pm = pm_sleep_ptr(&exar_pci_pm),
},
.id_table = exar_pci_tbl,
};
module_pci_driver(exar_pci_driver);
+MODULE_IMPORT_NS(SERIAL_8250_PCI);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Exar Serial Driver");
MODULE_AUTHOR("Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>");
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index a12f737..a2783e3 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -234,7 +234,7 @@
struct ingenic_uart_data *data;
const struct ingenic_uart_config *cdata;
struct resource *regs;
- int irq, err, line;
+ int err;
cdata = of_device_get_match_data(&pdev->dev);
if (!cdata) {
@@ -242,10 +242,6 @@
return -ENODEV;
}
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
-
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!regs) {
dev_err(&pdev->dev, "no registers defined\n");
@@ -259,21 +255,19 @@
spin_lock_init(&uart.port.lock);
uart.port.type = PORT_16550A;
uart.port.flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE;
- uart.port.iotype = UPIO_MEM;
uart.port.mapbase = regs->start;
- uart.port.regshift = 2;
uart.port.serial_out = ingenic_uart_serial_out;
uart.port.serial_in = ingenic_uart_serial_in;
- uart.port.irq = irq;
uart.port.dev = &pdev->dev;
- uart.port.fifosize = cdata->fifosize;
uart.tx_loadsz = cdata->tx_loadsz;
uart.capabilities = UART_CAP_FIFO | UART_CAP_RTOIE;
- /* Check for a fixed line number */
- line = of_alias_get_id(pdev->dev.of_node, "serial");
- if (line >= 0)
- uart.port.line = line;
+ err = uart_read_port_properties(&uart.port);
+ if (err)
+ return err;
+
+ uart.port.regshift = 2;
+ uart.port.fifosize = cdata->fifosize;
uart.port.membase = devm_ioremap(&pdev->dev, regs->start,
resource_size(regs));
diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c
index 8d728a6..7984ee0 100644
--- a/drivers/tty/serial/8250/8250_lpc18xx.c
+++ b/drivers/tty/serial/8250/8250_lpc18xx.c
@@ -92,11 +92,7 @@
struct lpc18xx_uart_data *data;
struct uart_8250_port uart;
struct resource *res;
- int irq, ret;
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
+ int ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
@@ -139,19 +135,12 @@
goto dis_clk_reg;
}
- ret = of_alias_get_id(pdev->dev.of_node, "serial");
- if (ret >= 0)
- uart.port.line = ret;
-
data->dma.rx_param = data;
data->dma.tx_param = data;
spin_lock_init(&uart.port.lock);
uart.port.dev = &pdev->dev;
- uart.port.irq = irq;
- uart.port.iotype = UPIO_MEM32;
uart.port.mapbase = res->start;
- uart.port.regshift = 2;
uart.port.type = PORT_16550A;
uart.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SKIP_TEST;
uart.port.uartclk = clk_get_rate(data->clk_uart);
@@ -160,6 +149,13 @@
uart.port.rs485_supported = lpc18xx_rs485_supported;
uart.port.serial_out = lpc18xx_uart_serial_out;
+ ret = uart_read_port_properties(&uart.port);
+ if (ret)
+ return ret;
+
+ uart.port.iotype = UPIO_MEM32;
+ uart.port.regshift = 2;
+
uart.dma = &data->dma;
uart.dma->rxconf.src_maxburst = 1;
uart.dma->txconf.dst_maxburst = 1;
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 34f17a9..5d1dd99 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -4,7 +4,10 @@
*
* Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp.
*/
+
+#include <linux/bits.h>
#include <linux/console.h>
+#include <linux/math.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
@@ -25,6 +28,36 @@
int line;
};
+/* Nuvoton NPCM timeout register */
+#define UART_NPCM_TOR 7
+#define UART_NPCM_TOIE BIT(7) /* Timeout Interrupt Enable */
+
+static int npcm_startup(struct uart_port *port)
+{
+ /*
+ * Nuvoton calls the scratch register 'UART_TOR' (timeout
+ * register). Enable it, and set TIOC (timeout interrupt
+ * comparator) to be 0x20 for correct operation.
+ */
+ serial_port_out(port, UART_NPCM_TOR, UART_NPCM_TOIE | 0x20);
+
+ return serial8250_do_startup(port);
+}
+
+/* Nuvoton NPCM UARTs have a custom divisor calculation */
+static unsigned int npcm_get_divisor(struct uart_port *port, unsigned int baud,
+ unsigned int *frac)
+{
+ return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2;
+}
+
+static int npcm_setup(struct uart_port *port)
+{
+ port->get_divisor = npcm_get_divisor;
+ port->startup = npcm_startup;
+ return 0;
+}
+
/*
* Fill a struct uart_port for a given device node
*/
@@ -36,37 +69,22 @@
struct device *dev = &ofdev->dev;
struct device_node *np = dev->of_node;
struct uart_port *port = &up->port;
- u32 clk, spd, prop;
- int ret, irq;
+ u32 spd;
+ int ret;
memset(port, 0, sizeof *port);
pm_runtime_enable(&ofdev->dev);
pm_runtime_get_sync(&ofdev->dev);
- if (of_property_read_u32(np, "clock-frequency", &clk)) {
-
- /* Get clk rate through clk driver if present */
- info->clk = devm_clk_get_enabled(dev, NULL);
- if (IS_ERR(info->clk)) {
- ret = dev_err_probe(dev, PTR_ERR(info->clk), "failed to get clock\n");
- goto err_pmruntime;
- }
-
- clk = clk_get_rate(info->clk);
- }
- /* If current-speed was set, then try not to change it. */
- if (of_property_read_u32(np, "current-speed", &spd) == 0)
- port->custom_divisor = clk / (16 * spd);
-
ret = of_address_to_resource(np, 0, &resource);
if (ret) {
dev_err_probe(dev, ret, "invalid address\n");
goto err_pmruntime;
}
- port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT |
- UPF_FIXED_TYPE;
+ port->dev = &ofdev->dev;
+ port->flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_FIXED_TYPE;
spin_lock_init(&port->lock);
if (resource_type(&resource) == IORESOURCE_IO) {
@@ -75,70 +93,31 @@
} else {
port->mapbase = resource.start;
port->mapsize = resource_size(&resource);
-
- /* Check for shifted address mapping */
- if (of_property_read_u32(np, "reg-offset", &prop) == 0) {
- if (prop >= port->mapsize) {
- ret = dev_err_probe(dev, -EINVAL, "reg-offset %u exceeds region size %pa\n",
- prop, &port->mapsize);
- goto err_pmruntime;
- }
-
- port->mapbase += prop;
- port->mapsize -= prop;
- }
-
- port->iotype = UPIO_MEM;
- if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
- switch (prop) {
- case 1:
- port->iotype = UPIO_MEM;
- break;
- case 2:
- port->iotype = UPIO_MEM16;
- break;
- case 4:
- port->iotype = of_device_is_big_endian(np) ?
- UPIO_MEM32BE : UPIO_MEM32;
- break;
- default:
- ret = dev_err_probe(dev, -EINVAL, "unsupported reg-io-width (%u)\n",
- prop);
- goto err_pmruntime;
- }
- }
port->flags |= UPF_IOREMAP;
}
+ ret = uart_read_and_validate_port_properties(port);
+ if (ret)
+ goto err_pmruntime;
+
+ /* Get clk rate through clk driver if present */
+ if (!port->uartclk) {
+ info->clk = devm_clk_get_enabled(dev, NULL);
+ if (IS_ERR(info->clk)) {
+ ret = dev_err_probe(dev, PTR_ERR(info->clk), "failed to get clock\n");
+ goto err_pmruntime;
+ }
+
+ port->uartclk = clk_get_rate(info->clk);
+ }
+ /* If current-speed was set, then try not to change it. */
+ if (of_property_read_u32(np, "current-speed", &spd) == 0)
+ port->custom_divisor = port->uartclk / (16 * spd);
+
/* Compatibility with the deprecated pxa driver and 8250_pxa drivers. */
if (of_device_is_compatible(np, "mrvl,mmp-uart"))
port->regshift = 2;
- /* Check for registers offset within the devices address range */
- if (of_property_read_u32(np, "reg-shift", &prop) == 0)
- port->regshift = prop;
-
- /* Check for fifo size */
- if (of_property_read_u32(np, "fifo-size", &prop) == 0)
- port->fifosize = prop;
-
- /* Check for a fixed line number */
- ret = of_alias_get_id(np, "serial");
- if (ret >= 0)
- port->line = ret;
-
- irq = of_irq_get(np, 0);
- if (irq < 0) {
- if (irq == -EPROBE_DEFER) {
- ret = -EPROBE_DEFER;
- goto err_pmruntime;
- }
- /* IRQ support not mandatory */
- irq = 0;
- }
-
- port->irq = irq;
-
info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
if (IS_ERR(info->rst)) {
ret = PTR_ERR(info->rst);
@@ -150,12 +129,6 @@
goto err_pmruntime;
port->type = type;
- port->uartclk = clk;
-
- if (of_property_read_bool(np, "no-loopback-test"))
- port->flags |= UPF_SKIP_TEST;
-
- port->dev = &ofdev->dev;
port->rs485_config = serial8250_em485_config;
port->rs485_supported = serial8250_em485_supported;
up->rs485_start_tx = serial8250_em485_start_tx;
@@ -164,10 +137,17 @@
switch (type) {
case PORT_RT2880:
ret = rt288x_setup(port);
- if (ret)
- goto err_pmruntime;
+ break;
+ case PORT_NPCM:
+ ret = npcm_setup(port);
+ break;
+ default:
+ /* Nothing to do */
+ ret = 0;
break;
}
+ if (ret)
+ goto err_pmruntime;
if (IS_REACHABLE(CONFIG_SERIAL_8250_FSL) &&
(of_device_is_compatible(np, "fsl,ns16550") ||
@@ -240,7 +220,6 @@
platform_set_drvdata(ofdev, info);
return 0;
err_dispose:
- irq_dispose_mapping(port8250.port.irq);
pm_runtime_put_sync(&ofdev->dev);
pm_runtime_disable(&ofdev->dev);
err_free:
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 6942990..66901d9 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1394,11 +1394,7 @@
struct uart_8250_port up;
struct resource *regs;
void __iomem *membase;
- int irq, ret;
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
+ int ret;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!regs) {
@@ -1419,7 +1415,6 @@
up.port.dev = &pdev->dev;
up.port.mapbase = regs->start;
up.port.membase = membase;
- up.port.irq = irq;
/*
* It claims to be 16C750 compatible however it is a little different.
* It has EFR and has no FCR7_64byte bit. The AFE (which it claims to
@@ -1429,13 +1424,9 @@
* or pm callback.
*/
up.port.type = PORT_8250;
- up.port.iotype = UPIO_MEM;
- up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SOFT_FLOW |
- UPF_HARD_FLOW;
+ up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SOFT_FLOW | UPF_HARD_FLOW;
up.port.private_data = priv;
- up.port.regshift = OMAP_UART_REGSHIFT;
- up.port.fifosize = 64;
up.tx_loadsz = 64;
up.capabilities = UART_CAP_FIFO;
#ifdef CONFIG_PM
@@ -1461,14 +1452,14 @@
up.rs485_stop_tx = serial8250_em485_stop_tx;
up.port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE);
- ret = of_alias_get_id(np, "serial");
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to get alias\n");
+ ret = uart_read_port_properties(&up.port);
+ if (ret)
return ret;
- }
- up.port.line = ret;
- if (of_property_read_u32(np, "clock-frequency", &up.port.uartclk)) {
+ up.port.regshift = OMAP_UART_REGSHIFT;
+ up.port.fifosize = 64;
+
+ if (!up.port.uartclk) {
struct clk *clk;
clk = devm_clk_get(&pdev->dev, NULL);
@@ -1560,8 +1551,8 @@
}
#endif
- irq_set_status_flags(irq, IRQ_NOAUTOEN);
- ret = devm_request_irq(&pdev->dev, irq, omap8250_irq, 0,
+ irq_set_status_flags(up.port.irq, IRQ_NOAUTOEN);
+ ret = devm_request_irq(&pdev->dev, up.port.irq, omap8250_irq, 0,
dev_name(&pdev->dev), priv);
if (ret < 0)
return ret;
diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c
index 2dda737..2fbb585 100644
--- a/drivers/tty/serial/8250/8250_pci1xxxx.c
+++ b/drivers/tty/serial/8250/8250_pci1xxxx.c
@@ -7,23 +7,31 @@
* Copyright (C) 2022 Microchip Technology Inc., All Rights Reserved.
*/
+#include <linux/array_size.h>
#include <linux/bitfield.h>
-#include <linux/bitops.h>
-#include <linux/delay.h>
+#include <linux/bits.h>
+#include <linux/circ_buf.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gfp_types.h>
#include <linux/io.h>
#include <linux/iopoll.h>
-#include <linux/kernel.h>
+#include <linux/minmax.h>
#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/overflow.h>
#include <linux/pci.h>
+#include <linux/pm.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/serial_8250.h>
-#include <linux/slab.h>
+#include <linux/spinlock.h>
#include <linux/string.h>
-#include <linux/units.h>
+#include <linux/time.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
-#include <linux/8250_pci.h>
+#include <linux/types.h>
+#include <linux/units.h>
#include <asm/byteorder.h>
@@ -67,6 +75,7 @@
#define SYSLOCK_RETRY_CNT 1000
#define UART_RX_BYTE_FIFO 0x00
+#define UART_TX_BYTE_FIFO 0x00
#define UART_FIFO_CTL 0x02
#define UART_ACTV_REG 0x11
@@ -81,10 +90,10 @@
#define ADCL_CFG_PIN_SEL BIT(1)
#define ADCL_CFG_EN BIT(0)
-#define UART_BIT_SAMPLE_CNT 16
+#define UART_BIT_SAMPLE_CNT_8 8
+#define UART_BIT_SAMPLE_CNT_16 16
#define BAUD_CLOCK_DIV_INT_MSK GENMASK(31, 8)
#define ADCL_CFG_RTS_DELAY_MASK GENMASK(11, 8)
-#define UART_CLOCK_DEFAULT (62500 * HZ_PER_KHZ)
#define UART_WAKE_REG 0x8C
#define UART_WAKE_MASK_REG 0x90
@@ -95,13 +104,19 @@
(UART_WAKE_N_PIN | UART_WAKE_NCTS | UART_WAKE_INT)
#define UART_BAUD_CLK_DIVISOR_REG 0x54
+#define FRAC_DIV_CFG_REG 0x58
#define UART_RESET_REG 0x94
#define UART_RESET_D3_RESET_DISABLE BIT(16)
#define UART_BURST_STATUS_REG 0x9C
+#define UART_TX_BURST_FIFO 0xA0
#define UART_RX_BURST_FIFO 0xA4
+#define UART_BIT_DIVISOR_8 0x26731000
+#define UART_BIT_DIVISOR_16 0x6ef71000
+#define UART_BAUD_4MBPS 4000000
+
#define MAX_PORTS 4
#define PORT_OFFSET 0x100
#define RX_BUF_SIZE 512
@@ -109,6 +124,7 @@
#define UART_BURST_SIZE 4
#define UART_BST_STAT_RX_COUNT_MASK 0x00FF
+#define UART_BST_STAT_TX_COUNT_MASK 0xFF00
#define UART_BST_STAT_IIR_INT_PEND 0x100000
#define UART_LSR_OVERRUN_ERR_CLR 0x43
#define UART_BST_STAT_LSR_RX_MASK 0x9F000000
@@ -116,6 +132,7 @@
#define UART_BST_STAT_LSR_OVERRUN_ERR 0x2000000
#define UART_BST_STAT_LSR_PARITY_ERR 0x4000000
#define UART_BST_STAT_LSR_FRAME_ERR 0x8000000
+#define UART_BST_STAT_LSR_THRE 0x20000000
struct pci1xxxx_8250 {
unsigned int nr;
@@ -206,15 +223,21 @@
static unsigned int pci1xxxx_get_divisor(struct uart_port *port,
unsigned int baud, unsigned int *frac)
{
+ unsigned int uart_sample_cnt;
unsigned int quot;
+ if (baud >= UART_BAUD_4MBPS)
+ uart_sample_cnt = UART_BIT_SAMPLE_CNT_8;
+ else
+ uart_sample_cnt = UART_BIT_SAMPLE_CNT_16;
+
/*
* Calculate baud rate sampling period in nanoseconds.
* Fractional part x denotes x/255 parts of a nanosecond.
*/
- quot = NSEC_PER_SEC / (baud * UART_BIT_SAMPLE_CNT);
- *frac = (NSEC_PER_SEC - quot * baud * UART_BIT_SAMPLE_CNT) *
- 255 / UART_BIT_SAMPLE_CNT / baud;
+ quot = NSEC_PER_SEC / (baud * uart_sample_cnt);
+ *frac = (NSEC_PER_SEC - quot * baud * uart_sample_cnt) *
+ 255 / uart_sample_cnt / baud;
return quot;
}
@@ -222,6 +245,11 @@
static void pci1xxxx_set_divisor(struct uart_port *port, unsigned int baud,
unsigned int quot, unsigned int frac)
{
+ if (baud >= UART_BAUD_4MBPS)
+ writel(UART_BIT_DIVISOR_8, port->membase + FRAC_DIV_CFG_REG);
+ else
+ writel(UART_BIT_DIVISOR_16, port->membase + FRAC_DIV_CFG_REG);
+
writel(FIELD_PREP(BAUD_CLOCK_DIV_INT_MSK, quot) | frac,
port->membase + UART_BAUD_CLK_DIVISOR_REG);
}
@@ -233,7 +261,16 @@
u32 delay_in_baud_periods;
u32 baud_period_in_ns;
u32 mode_cfg = 0;
+ u32 sample_cnt;
u32 clock_div;
+ u32 frac_div;
+
+ frac_div = readl(port->membase + FRAC_DIV_CFG_REG);
+
+ if (frac_div == UART_BIT_DIVISOR_16)
+ sample_cnt = UART_BIT_SAMPLE_CNT_16;
+ else
+ sample_cnt = UART_BIT_SAMPLE_CNT_8;
/*
* pci1xxxx's uart hardware supports only RTS delay after
@@ -249,7 +286,7 @@
clock_div = readl(port->membase + UART_BAUD_CLK_DIVISOR_REG);
baud_period_in_ns =
FIELD_GET(BAUD_CLOCK_DIV_INT_MSK, clock_div) *
- UART_BIT_SAMPLE_CNT;
+ sample_cnt;
delay_in_baud_periods =
rs485->delay_rts_after_send * NSEC_PER_MSEC /
baud_period_in_ns;
@@ -344,6 +381,105 @@
}
}
+static void pci1xxxx_process_write_data(struct uart_port *port,
+ struct circ_buf *xmit,
+ int *data_empty_count,
+ u32 *valid_byte_count)
+{
+ u32 valid_burst_count = *valid_byte_count / UART_BURST_SIZE;
+
+ /*
+ * Each transaction transfers data in DWORDs. If there are less than
+ * four remaining valid_byte_count to transfer or if the circular
+ * buffer has insufficient space for a DWORD, the data is transferred
+ * one byte at a time.
+ */
+ while (valid_burst_count) {
+ if (*data_empty_count - UART_BURST_SIZE < 0)
+ break;
+ if (xmit->tail > (UART_XMIT_SIZE - UART_BURST_SIZE))
+ break;
+ writel(*(unsigned int *)&xmit->buf[xmit->tail],
+ port->membase + UART_TX_BURST_FIFO);
+ *valid_byte_count -= UART_BURST_SIZE;
+ *data_empty_count -= UART_BURST_SIZE;
+ valid_burst_count -= UART_BYTE_SIZE;
+
+ xmit->tail = (xmit->tail + UART_BURST_SIZE) &
+ (UART_XMIT_SIZE - 1);
+ }
+
+ while (*valid_byte_count) {
+ if (*data_empty_count - UART_BYTE_SIZE < 0)
+ break;
+ writeb(xmit->buf[xmit->tail], port->membase +
+ UART_TX_BYTE_FIFO);
+ *data_empty_count -= UART_BYTE_SIZE;
+ *valid_byte_count -= UART_BYTE_SIZE;
+
+ /*
+ * When the tail of the circular buffer is reached, the next
+ * byte is transferred to the beginning of the buffer.
+ */
+ xmit->tail = (xmit->tail + UART_BYTE_SIZE) &
+ (UART_XMIT_SIZE - 1);
+
+ /*
+ * If there are any pending burst count, data is handled by
+ * transmitting DWORDs at a time.
+ */
+ if (valid_burst_count && (xmit->tail <
+ (UART_XMIT_SIZE - UART_BURST_SIZE)))
+ break;
+ }
+}
+
+static void pci1xxxx_tx_burst(struct uart_port *port, u32 uart_status)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+ u32 valid_byte_count;
+ int data_empty_count;
+ struct circ_buf *xmit;
+
+ xmit = &port->state->xmit;
+
+ if (port->x_char) {
+ writeb(port->x_char, port->membase + UART_TX);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+
+ if ((uart_tx_stopped(port)) || (uart_circ_empty(xmit))) {
+ port->ops->stop_tx(port);
+ } else {
+ data_empty_count = (pci1xxxx_read_burst_status(port) &
+ UART_BST_STAT_TX_COUNT_MASK) >> 8;
+ do {
+ valid_byte_count = uart_circ_chars_pending(xmit);
+
+ pci1xxxx_process_write_data(port, xmit,
+ &data_empty_count,
+ &valid_byte_count);
+
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (data_empty_count && valid_byte_count);
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ /*
+ * With RPM enabled, we have to wait until the FIFO is empty before
+ * the HW can go idle. So we get here once again with empty FIFO and
+ * disable the interrupt and RPM in __stop_tx()
+ */
+ if (uart_circ_empty(xmit) && !(up->capabilities & UART_CAP_RPM))
+ port->ops->stop_tx(port);
+}
+
static int pci1xxxx_handle_irq(struct uart_port *port)
{
unsigned long flags;
@@ -359,6 +495,9 @@
if (status & UART_BST_STAT_LSR_RX_MASK)
pci1xxxx_rx_burst(port, status);
+ if (status & UART_BST_STAT_LSR_THRE)
+ pci1xxxx_tx_burst(port, status);
+
spin_unlock_irqrestore(&port->lock, flags);
return 1;
@@ -481,6 +620,17 @@
port->port.flags |= UPF_FIXED_TYPE | UPF_SKIP_TEST;
port->port.type = PORT_MCHP16550A;
+ /*
+ * 8250 core considers prescaller value to be always 16.
+ * The MCHP ports support downscaled mode and hence the
+ * functional UART clock can be lower, i.e. 62.5MHz, than
+ * software expects in order to support higher baud rates.
+ * Assign here 64MHz to support 4Mbps.
+ *
+ * The value itself is not really used anywhere except baud
+ * rate calculations, so we can mangle it as we wish.
+ */
+ port->port.uartclk = 64 * HZ_PER_MHZ;
port->port.set_termios = serial8250_do_set_termios;
port->port.get_divisor = pci1xxxx_get_divisor;
port->port.set_divisor = pci1xxxx_set_divisor;
@@ -594,7 +744,6 @@
memset(&uart, 0, sizeof(uart));
uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT;
- uart.port.uartclk = UART_CLOCK_DEFAULT;
uart.port.dev = dev;
if (num_vectors == max_vec_reqd)
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 8ca061d..fc9dd5d 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -38,10 +38,6 @@
#include "8250.h"
-/* Nuvoton NPCM timeout register */
-#define UART_NPCM_TOR 7
-#define UART_NPCM_TOIE BIT(7) /* Timeout Interrupt Enable */
-
/*
* Debugging.
*/
@@ -1329,9 +1325,6 @@
inb_p(ICP);
}
- if (uart_console(port))
- console_lock();
-
/* forget possible initially masked and pending IRQ */
probe_irq_off(probe_irq_on());
save_mcr = serial8250_in_MCR(up);
@@ -1371,9 +1364,6 @@
if (port->flags & UPF_FOURPORT)
outb_p(save_ICP, ICP);
- if (uart_console(port))
- console_unlock();
-
port->irq = (irq > 0) ? irq : 0;
}
@@ -2235,15 +2225,6 @@
UART_DA830_PWREMU_MGMT_FREE);
}
- if (port->type == PORT_NPCM) {
- /*
- * Nuvoton calls the scratch register 'UART_TOR' (timeout
- * register). Enable it, and set TIOC (timeout interrupt
- * comparator) to be 0x20 for correct operation.
- */
- serial_port_out(port, UART_NPCM_TOR, UART_NPCM_TOIE | 0x20);
- }
-
#ifdef CONFIG_SERIAL_8250_RSA
/*
* If this is an RSA port, see if we can kick it up to the
@@ -2545,15 +2526,6 @@
serial8250_do_shutdown(port);
}
-/* Nuvoton NPCM UARTs have a custom divisor calculation */
-static unsigned int npcm_get_divisor(struct uart_8250_port *up,
- unsigned int baud)
-{
- struct uart_port *port = &up->port;
-
- return DIV_ROUND_CLOSEST(port->uartclk, 16 * baud + 2) - 2;
-}
-
static unsigned int serial8250_do_get_divisor(struct uart_port *port,
unsigned int baud,
unsigned int *frac)
@@ -2598,8 +2570,6 @@
quot = 0x8001;
else if (magic_multiplier && baud >= port->uartclk / 12)
quot = 0x8002;
- else if (up->port.type == PORT_NPCM)
- quot = npcm_get_divisor(up, baud);
else
quot = uart_get_divisor(port, baud);
@@ -2714,12 +2684,8 @@
*/
void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk)
{
- struct uart_8250_port *up = up_to_u8250p(port);
struct tty_port *tport = &port->state->port;
- unsigned int baud, quot, frac = 0;
- struct ktermios *termios;
struct tty_struct *tty;
- unsigned long flags;
tty = tty_port_tty_get(tport);
if (!tty) {
@@ -2740,21 +2706,7 @@
if (!tty_port_initialized(tport))
goto out_unlock;
- termios = &tty->termios;
-
- baud = serial8250_get_baud_rate(port, termios, NULL);
- quot = serial8250_get_divisor(port, baud, &frac);
-
- serial8250_rpm_get(up);
- uart_port_lock_irqsave(port, &flags);
-
- uart_update_timeout(port, termios->c_cflag, baud);
-
- serial8250_set_divisor(port, baud, quot, frac);
- serial_port_out(port, UART_LCR, up->lcr);
-
- uart_port_unlock_irqrestore(port, flags);
- serial8250_rpm_put(up);
+ serial8250_do_set_termios(port, &tty->termios, NULL);
out_unlock:
mutex_unlock(&tport->mutex);
diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c
index 77686da..f1a51b0 100644
--- a/drivers/tty/serial/8250/8250_pxa.c
+++ b/drivers/tty/serial/8250/8250_pxa.c
@@ -92,11 +92,7 @@
struct uart_8250_port uart = {};
struct pxa8250_data *data;
struct resource *mmres;
- int irq, ret;
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
+ int ret;
mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mmres)
@@ -114,21 +110,21 @@
if (ret)
return ret;
- ret = of_alias_get_id(pdev->dev.of_node, "serial");
- if (ret >= 0)
- uart.port.line = ret;
-
uart.port.type = PORT_XSCALE;
- uart.port.iotype = UPIO_MEM32;
uart.port.mapbase = mmres->start;
- uart.port.regshift = 2;
- uart.port.irq = irq;
- uart.port.fifosize = 64;
uart.port.flags = UPF_IOREMAP | UPF_SKIP_TEST | UPF_FIXED_TYPE;
uart.port.dev = &pdev->dev;
uart.port.uartclk = clk_get_rate(data->clk);
uart.port.pm = serial_pxa_pm;
uart.port.private_data = data;
+
+ ret = uart_read_port_properties(&uart.port);
+ if (ret)
+ return ret;
+
+ uart.port.iotype = UPIO_MEM32;
+ uart.port.regshift = 2;
+ uart.port.fifosize = 64;
uart.dl_write = serial_pxa_dl_write;
ret = serial8250_register_8250_port(&uart);
diff --git a/drivers/tty/serial/8250/8250_tegra.c b/drivers/tty/serial/8250/8250_tegra.c
index ba35226..60a80d0 100644
--- a/drivers/tty/serial/8250/8250_tegra.c
+++ b/drivers/tty/serial/8250/8250_tegra.c
@@ -57,25 +57,11 @@
port = &port8250.port;
spin_lock_init(&port->lock);
- port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT |
- UPF_FIXED_TYPE;
- port->iotype = UPIO_MEM32;
- port->regshift = 2;
+ port->flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_FIXED_TYPE;
port->type = PORT_TEGRA;
- port->irqflags |= IRQF_SHARED;
port->dev = &pdev->dev;
port->handle_break = tegra_uart_handle_break;
- ret = of_alias_get_id(pdev->dev.of_node, "serial");
- if (ret >= 0)
- port->line = ret;
-
- ret = platform_get_irq(pdev, 0);
- if (ret < 0)
- return ret;
-
- port->irq = ret;
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
@@ -88,12 +74,18 @@
port->mapbase = res->start;
port->mapsize = resource_size(res);
+ ret = uart_read_port_properties(port);
+ if (ret)
+ return ret;
+
+ port->iotype = UPIO_MEM32;
+ port->regshift = 2;
+
uart->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
if (IS_ERR(uart->rst))
return PTR_ERR(uart->rst);
- if (device_property_read_u32(&pdev->dev, "clock-frequency",
- &port->uartclk)) {
+ if (!port->uartclk) {
uart->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(uart->clk)) {
dev_err(&pdev->dev, "failed to get clock!\n");
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index 6399a38..670d2ca 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -162,7 +162,6 @@
struct uniphier8250_priv *priv;
struct resource *regs;
void __iomem *membase;
- int irq;
int ret;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -175,23 +174,12 @@
if (!membase)
return -ENOMEM;
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
-
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
memset(&up, 0, sizeof(up));
- ret = of_alias_get_id(dev->of_node, "serial");
- if (ret < 0) {
- dev_err(dev, "failed to get alias id\n");
- return ret;
- }
- up.port.line = ret;
-
priv->clk = devm_clk_get(dev, NULL);
if (IS_ERR(priv->clk)) {
dev_err(dev, "failed to get clock\n");
@@ -211,7 +199,10 @@
up.port.mapbase = regs->start;
up.port.mapsize = resource_size(regs);
up.port.membase = membase;
- up.port.irq = irq;
+
+ ret = uart_read_port_properties(&up.port);
+ if (ret)
+ return ret;
up.port.type = PORT_16550A;
up.port.iotype = UPIO_MEM32;
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 8b9a2c4..47ff507 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -149,6 +149,7 @@
config SERIAL_8250_EXAR
tristate "8250/16550 Exar/Commtech PCI/PCIe device support"
depends on SERIAL_8250 && PCI
+ select SERIAL_8250_PCILIB
default SERIAL_8250
help
This builds support for XR17C1xx, XR17V3xx and some Commtech
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index cf2c890..2fa3fb3 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -348,10 +348,7 @@
flag = TTY_FRAME;
}
- uart_port_unlock(&uap->port);
- sysrq = uart_handle_sysrq_char(&uap->port, ch & 255);
- uart_port_lock(&uap->port);
-
+ sysrq = uart_prepare_sysrq_char(&uap->port, ch & 255);
if (!sysrq)
uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
}
@@ -1017,7 +1014,7 @@
ret = pl011_dma_rx_trigger_dma(uap);
pl011_dma_rx_chars(uap, pending, lastbuf, false);
- uart_port_unlock_irq(&uap->port);
+ uart_unlock_and_check_sysrq(&uap->port);
/*
* Do this check after we picked the DMA chars so we don't
* get some IRQ immediately from RX.
@@ -1540,11 +1537,10 @@
static irqreturn_t pl011_int(int irq, void *dev_id)
{
struct uart_amba_port *uap = dev_id;
- unsigned long flags;
unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
int handled = 0;
- uart_port_lock_irqsave(&uap->port, &flags);
+ uart_port_lock(&uap->port);
status = pl011_read(uap, REG_RIS) & uap->im;
if (status) {
do {
@@ -1573,7 +1569,7 @@
handled = 1;
}
- uart_port_unlock_irqrestore(&uap->port, flags);
+ uart_unlock_and_check_sysrq(&uap->port);
return IRQ_RETVAL(handled);
}
@@ -2322,13 +2318,10 @@
clk_enable(uap->clk);
- local_irq_save(flags);
- if (uap->port.sysrq)
- locked = 0;
- else if (oops_in_progress)
- locked = uart_port_trylock(&uap->port);
+ if (oops_in_progress)
+ locked = uart_port_trylock_irqsave(&uap->port, &flags);
else
- uart_port_lock(&uap->port);
+ uart_port_lock_irqsave(&uap->port, &flags);
/*
* First save the CR then disable the interrupts
@@ -2354,8 +2347,7 @@
pl011_write(old_cr, uap, REG_CR);
if (locked)
- uart_port_unlock(&uap->port);
- local_irq_restore(flags);
+ uart_port_unlock_irqrestore(&uap->port, flags);
clk_disable(uap->clk);
}
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
index 8d09ace..7790cbc 100644
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -378,7 +378,7 @@
up->port.icount.rx++;
ch = rdata & AR933X_UART_DATA_TX_RX_MASK;
- if (uart_handle_sysrq_char(&up->port, ch))
+ if (uart_prepare_sysrq_char(&up->port, ch))
continue;
if ((up->port.ignore_status_mask & AR933X_DUMMY_STATUS_RD) == 0)
@@ -468,7 +468,7 @@
ar933x_uart_tx_chars(up);
}
- uart_port_unlock(&up->port);
+ uart_unlock_and_check_sysrq(&up->port);
return IRQ_HANDLED;
}
@@ -627,14 +627,10 @@
unsigned int int_en;
int locked = 1;
- local_irq_save(flags);
-
- if (up->port.sysrq)
- locked = 0;
- else if (oops_in_progress)
- locked = uart_port_trylock(&up->port);
+ if (oops_in_progress)
+ locked = uart_port_trylock_irqsave(&up->port, &flags);
else
- uart_port_lock(&up->port);
+ uart_port_lock_irqsave(&up->port, &flags);
/*
* First save the IER then disable the interrupts
@@ -654,9 +650,7 @@
ar933x_uart_write(up, AR933X_UART_INT_REG, AR933X_UART_INT_ALLINTS);
if (locked)
- uart_port_unlock(&up->port);
-
- local_irq_restore(flags);
+ uart_port_unlock_irqrestore(&up->port, flags);
}
static int ar933x_uart_console_setup(struct console *co, char *options)
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index a3cefa1..34801a6 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -285,10 +285,9 @@
flag = TTY_PARITY;
}
- if (uart_handle_sysrq_char(port, c))
+ if (uart_prepare_sysrq_char(port, c))
continue;
-
if ((cstat & port->ignore_status_mask) == 0)
tty_insert_flip_char(tty_port, c, flag);
@@ -353,7 +352,7 @@
estat & UART_EXTINP_DCD_MASK);
}
- uart_port_unlock(port);
+ uart_unlock_and_check_sysrq(port);
return IRQ_HANDLED;
}
@@ -703,20 +702,14 @@
{
struct uart_port *port;
unsigned long flags;
- int locked;
+ int locked = 1;
port = &ports[co->index];
- local_irq_save(flags);
- if (port->sysrq) {
- /* bcm_uart_interrupt() already took the lock */
- locked = 0;
- } else if (oops_in_progress) {
- locked = uart_port_trylock(port);
- } else {
- uart_port_lock(port);
- locked = 1;
- }
+ if (oops_in_progress)
+ locked = uart_port_trylock_irqsave(port, &flags);
+ else
+ uart_port_lock_irqsave(port, &flags);
/* call helper to deal with \r\n */
uart_console_write(port, s, count, bcm_console_putchar);
@@ -725,8 +718,7 @@
wait_for_xmitr(port);
if (locked)
- uart_port_unlock(port);
- local_irq_restore(flags);
+ uart_port_unlock_irqrestore(port, flags);
}
/*
diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c
index 52c8787..5426322 100644
--- a/drivers/tty/serial/fsl_linflexuart.c
+++ b/drivers/tty/serial/fsl_linflexuart.c
@@ -837,7 +837,6 @@
return ret;
sport->dev = &pdev->dev;
- sport->type = PORT_LINFLEXUART;
sport->iotype = UPIO_MEM;
sport->irq = ret;
sport->ops = &linflex_pops;
diff --git a/drivers/tty/serial/jsm/jsm_cls.c b/drivers/tty/serial/jsm/jsm_cls.c
index 1eda489..ddbd42c 100644
--- a/drivers/tty/serial/jsm/jsm_cls.c
+++ b/drivers/tty/serial/jsm/jsm_cls.c
@@ -395,7 +395,6 @@
* which in this case is the break signal.
*/
if (linestatus & error_mask) {
- linestatus = 0;
readb(&ch->ch_cls_uart->txrx);
continue;
}
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index ec20329..3e4ac46 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -136,20 +136,16 @@
int locked = 1;
touch_nmi_watchdog();
- local_irq_save(flags);
- if (up->port.sysrq)
- locked = 0;
- else if (oops_in_progress)
- locked = uart_port_trylock(&up->port);
+ if (oops_in_progress)
+ locked = uart_port_trylock_irqsave(&up->port, &flags);
else
- uart_port_lock(&up->port);
+ uart_port_lock_irqsave(&up->port, &flags);
uart_console_write(&up->port, s, count, lpc32xx_hsuart_console_putchar);
wait_for_xmit_empty(&up->port);
if (locked)
- uart_port_unlock(&up->port);
- local_irq_restore(flags);
+ uart_port_unlock_irqrestore(&up->port, flags);
}
static int __init lpc32xx_hsuart_console_setup(struct console *co,
@@ -233,8 +229,6 @@
hsu_rate++;
}
- if (hsu_rate > 0xFF)
- hsu_rate = 0xFF;
return goodrate;
}
@@ -268,7 +262,8 @@
tty_insert_flip_char(tport, 0, TTY_FRAME);
}
- tty_insert_flip_char(tport, (tmp & 0xFF), flag);
+ if (!uart_prepare_sysrq_char(port, tmp & 0xff))
+ tty_insert_flip_char(tport, (tmp & 0xFF), flag);
tmp = readl(LPC32XX_HSUART_FIFO(port->membase));
}
@@ -333,7 +328,7 @@
__serial_lpc32xx_tx(port);
}
- uart_port_unlock(port);
+ uart_unlock_and_check_sysrq(port);
return IRQ_HANDLED;
}
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 10bf6d7..14dd9cf 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -30,6 +30,7 @@
#define MAX310X_MAJOR 204
#define MAX310X_MINOR 209
#define MAX310X_UART_NRMAX 16
+#define MAX310X_MAX_PORTS 4 /* Maximum number of UART ports per IC. */
/* MAX310X register definitions */
#define MAX310X_RHR_REG (0x00) /* RX FIFO */
@@ -66,6 +67,7 @@
#define MAX310X_BRGDIVMSB_REG (0x1d) /* Baud rate divisor MSB */
#define MAX310X_CLKSRC_REG (0x1e) /* Clock source */
#define MAX310X_REG_1F (0x1f)
+#define MAX310X_EXTREG_START (0x20) /* Only relevant in SPI mode. */
#define MAX310X_REVID_REG MAX310X_REG_1F /* Revision ID */
@@ -73,9 +75,9 @@
#define MAX310X_GLOBALCMD_REG MAX310X_REG_1F /* Global Command (WO) */
/* Extended registers */
-#define MAX310X_SPI_REVID_EXTREG MAX310X_REG_05 /* Revision ID */
-#define MAX310X_I2C_REVID_EXTREG (0x25) /* Revision ID */
-
+#define MAX310X_REVID_EXTREG (0x25) /* Revision ID
+ * (extended addressing space)
+ */
/* IRQ register bits */
#define MAX310X_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */
#define MAX310X_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */
@@ -160,14 +162,14 @@
#define MAX310X_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */
/* Flow control trigger level register masks */
-#define MAX310X_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */
-#define MAX310X_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */
+#define MAX310X_FLOWLVL_HALT_MASK GENMASK(3, 0) /* Flow control halt level */
+#define MAX310X_FLOWLVL_RES_MASK GENMASK(7, 4) /* Flow control resume level */
#define MAX310X_FLOWLVL_HALT(words) ((words / 8) & 0x0f)
#define MAX310X_FLOWLVL_RES(words) (((words / 8) & 0x0f) << 4)
/* FIFO interrupt trigger level register masks */
-#define MAX310X_FIFOTRIGLVL_TX_MASK (0x0f) /* TX FIFO trigger level */
-#define MAX310X_FIFOTRIGLVL_RX_MASK (0xf0) /* RX FIFO trigger level */
+#define MAX310X_FIFOTRIGLVL_TX_MASK GENMASK(3, 0) /* TX FIFO trigger level */
+#define MAX310X_FIFOTRIGLVL_RX_MASK GENMASK(7, 4) /* RX FIFO trigger level */
#define MAX310X_FIFOTRIGLVL_TX(words) ((words / 8) & 0x0f)
#define MAX310X_FIFOTRIGLVL_RX(words) (((words / 8) & 0x0f) << 4)
@@ -177,7 +179,8 @@
#define MAX310X_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs
* are used in conjunction with
* XOFF2 for definition of
- * special character */
+ * special character
+ */
#define MAX310X_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */
#define MAX310X_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */
#define MAX310X_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1
@@ -214,8 +217,8 @@
*/
/* PLL configuration register masks */
-#define MAX310X_PLLCFG_PREDIV_MASK (0x3f) /* PLL predivision value */
-#define MAX310X_PLLCFG_PLLFACTOR_MASK (0xc0) /* PLL multiplication factor */
+#define MAX310X_PLLCFG_PREDIV_MASK GENMASK(5, 0) /* PLL predivision value */
+#define MAX310X_PLLCFG_PLLFACTOR_MASK GENMASK(7, 6) /* PLL multiplication factor */
/* Baud rate generator configuration register bits */
#define MAX310X_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */
@@ -234,7 +237,7 @@
/* Misc definitions */
#define MAX310X_FIFO_SIZE (128)
-#define MAX310x_REV_MASK (0xf8)
+#define MAX310x_REV_MASK GENMASK(7, 3)
#define MAX310X_WRITE_BIT 0x80
/* Port startup definitions */
@@ -257,20 +260,21 @@
struct max310x_if_cfg {
int (*extended_reg_enable)(struct device *dev, bool enable);
-
- unsigned int rev_id_reg;
+ u8 rev_id_offset;
};
struct max310x_devtype {
struct {
unsigned short min;
unsigned short max;
- } slave_addr;
- char name[9];
+ } slave_addr; /* Relevant only in I2C mode. */
int nr;
+ char name[9];
u8 mode1;
- int (*detect)(struct device *);
- void (*power)(struct uart_port *, int);
+ u8 rev_id_val;
+ u8 rev_id_reg; /* Relevant only if rev_id_val is defined. */
+ u8 power_reg; /* Register address for power/sleep control. */
+ u8 power_bit; /* Bit for sleep or power-off mode (active high). */
};
struct max310x_one {
@@ -331,62 +335,52 @@
regmap_update_bits(one->regmap, reg, mask, val);
}
-static int max3107_detect(struct device *dev)
+static int max310x_detect(struct device *dev)
{
struct max310x_port *s = dev_get_drvdata(dev);
unsigned int val = 0;
int ret;
- ret = regmap_read(s->regmap, MAX310X_REVID_REG, &val);
- if (ret)
- return ret;
+ /* Check if variant supports REV ID register: */
+ if (s->devtype->rev_id_val) {
+ u8 rev_id_reg = s->devtype->rev_id_reg;
- if (((val & MAX310x_REV_MASK) != MAX3107_REV_ID)) {
- dev_err(dev,
- "%s ID 0x%02x does not match\n", s->devtype->name, val);
- return -ENODEV;
- }
+ /* Check if REV ID is in extended addressing space: */
+ if (s->devtype->rev_id_reg >= MAX310X_EXTREG_START) {
+ ret = s->if_cfg->extended_reg_enable(dev, true);
+ if (ret)
+ return ret;
- return 0;
-}
+ /* Adjust REV ID extended addressing space address: */
+ if (s->if_cfg->rev_id_offset)
+ rev_id_reg -= s->if_cfg->rev_id_offset;
+ }
-static int max3108_detect(struct device *dev)
-{
- struct max310x_port *s = dev_get_drvdata(dev);
- unsigned int val = 0;
- int ret;
+ regmap_read(s->regmap, rev_id_reg, &val);
- /* MAX3108 have not REV ID register, we just check default value
- * from clocksource register to make sure everything works.
- */
- ret = regmap_read(s->regmap, MAX310X_CLKSRC_REG, &val);
- if (ret)
- return ret;
+ if (s->devtype->rev_id_reg >= MAX310X_EXTREG_START) {
+ ret = s->if_cfg->extended_reg_enable(dev, false);
+ if (ret)
+ return ret;
+ }
- if (val != (MAX310X_CLKSRC_EXTCLK_BIT | MAX310X_CLKSRC_PLLBYP_BIT)) {
- dev_err(dev, "%s not present\n", s->devtype->name);
- return -ENODEV;
- }
+ if (((val & MAX310x_REV_MASK) != s->devtype->rev_id_val))
+ return dev_err_probe(dev, -ENODEV,
+ "%s ID 0x%02x does not match\n",
+ s->devtype->name, val);
+ } else {
+ /*
+ * For variant without REV ID register, just check default value
+ * from clocksource register to make sure everything works.
+ */
+ ret = regmap_read(s->regmap, MAX310X_CLKSRC_REG, &val);
+ if (ret)
+ return ret;
- return 0;
-}
-
-static int max3109_detect(struct device *dev)
-{
- struct max310x_port *s = dev_get_drvdata(dev);
- unsigned int val = 0;
- int ret;
-
- ret = s->if_cfg->extended_reg_enable(dev, true);
- if (ret)
- return ret;
-
- regmap_read(s->regmap, s->if_cfg->rev_id_reg, &val);
- s->if_cfg->extended_reg_enable(dev, false);
- if (((val & MAX310x_REV_MASK) != MAX3109_REV_ID)) {
- dev_err(dev,
- "%s ID 0x%02x does not match\n", s->devtype->name, val);
- return -ENODEV;
+ if (val != (MAX310X_CLKSRC_EXTCLK_BIT | MAX310X_CLKSRC_PLLBYP_BIT))
+ return dev_err_probe(dev, -ENODEV,
+ "%s not present\n",
+ s->devtype->name);
}
return 0;
@@ -394,39 +388,10 @@
static void max310x_power(struct uart_port *port, int on)
{
- max310x_port_update(port, MAX310X_MODE1_REG,
- MAX310X_MODE1_FORCESLEEP_BIT,
- on ? 0 : MAX310X_MODE1_FORCESLEEP_BIT);
- if (on)
- msleep(50);
-}
+ struct max310x_port *s = dev_get_drvdata(port->dev);
-static int max14830_detect(struct device *dev)
-{
- struct max310x_port *s = dev_get_drvdata(dev);
- unsigned int val = 0;
- int ret;
-
- ret = s->if_cfg->extended_reg_enable(dev, true);
- if (ret)
- return ret;
-
- regmap_read(s->regmap, s->if_cfg->rev_id_reg, &val);
- s->if_cfg->extended_reg_enable(dev, false);
- if (((val & MAX310x_REV_MASK) != MAX14830_REV_ID)) {
- dev_err(dev,
- "%s ID 0x%02x does not match\n", s->devtype->name, val);
- return -ENODEV;
- }
-
- return 0;
-}
-
-static void max14830_power(struct uart_port *port, int on)
-{
- max310x_port_update(port, MAX310X_BRGCFG_REG,
- MAX14830_BRGCFG_CLKDIS_BIT,
- on ? 0 : MAX14830_BRGCFG_CLKDIS_BIT);
+ max310x_port_update(port, s->devtype->power_reg, s->devtype->power_bit,
+ on ? 0 : s->devtype->power_bit);
if (on)
msleep(50);
}
@@ -435,8 +400,10 @@
.name = "MAX3107",
.nr = 1,
.mode1 = MAX310X_MODE1_AUTOSLEEP_BIT | MAX310X_MODE1_IRQSEL_BIT,
- .detect = max3107_detect,
- .power = max310x_power,
+ .rev_id_val = MAX3107_REV_ID,
+ .rev_id_reg = MAX310X_REVID_REG,
+ .power_reg = MAX310X_MODE1_REG,
+ .power_bit = MAX310X_MODE1_FORCESLEEP_BIT,
.slave_addr = {
.min = 0x2c,
.max = 0x2f,
@@ -447,8 +414,10 @@
.name = "MAX3108",
.nr = 1,
.mode1 = MAX310X_MODE1_AUTOSLEEP_BIT,
- .detect = max3108_detect,
- .power = max310x_power,
+ .rev_id_val = 0, /* Unsupported. */
+ .rev_id_reg = 0, /* Irrelevant when rev_id_val is not defined. */
+ .power_reg = MAX310X_MODE1_REG,
+ .power_bit = MAX310X_MODE1_FORCESLEEP_BIT,
.slave_addr = {
.min = 0x60,
.max = 0x6f,
@@ -459,8 +428,10 @@
.name = "MAX3109",
.nr = 2,
.mode1 = MAX310X_MODE1_AUTOSLEEP_BIT,
- .detect = max3109_detect,
- .power = max310x_power,
+ .rev_id_val = MAX3109_REV_ID,
+ .rev_id_reg = MAX310X_REVID_EXTREG,
+ .power_reg = MAX310X_MODE1_REG,
+ .power_bit = MAX310X_MODE1_FORCESLEEP_BIT,
.slave_addr = {
.min = 0x60,
.max = 0x6f,
@@ -471,8 +442,10 @@
.name = "MAX14830",
.nr = 4,
.mode1 = MAX310X_MODE1_IRQSEL_BIT,
- .detect = max14830_detect,
- .power = max14830_power,
+ .rev_id_val = MAX14830_REV_ID,
+ .rev_id_reg = MAX310X_REVID_EXTREG,
+ .power_reg = MAX310X_BRGCFG_REG,
+ .power_bit = MAX14830_BRGCFG_CLKDIS_BIT,
.slave_addr = {
.min = 0x60,
.max = 0x6f,
@@ -490,10 +463,8 @@
case MAX310X_RXFIFOLVL_REG:
return false;
default:
- break;
+ return true;
}
-
- return true;
}
static bool max310x_reg_volatile(struct device *dev, unsigned int reg)
@@ -512,10 +483,8 @@
case MAX310X_REG_1F:
return true;
default:
- break;
+ return false;
}
-
- return false;
}
static bool max310x_reg_precious(struct device *dev, unsigned int reg)
@@ -527,10 +496,8 @@
case MAX310X_STS_IRQSTS_REG:
return true;
default:
- break;
+ return false;
}
-
- return false;
}
static bool max310x_reg_noinc(struct device *dev, unsigned int reg)
@@ -689,7 +656,8 @@
u8 ch, flag;
if (port->read_status_mask == MAX310X_LSR_RXOVR_BIT) {
- /* We are just reading, happily ignoring any error conditions.
+ /*
+ * We are just reading, happily ignoring any error conditions.
* Break condition, parity checking, framing errors -- they
* are all ignored. That means that we can do a batch-read.
*
@@ -698,7 +666,7 @@
* that the LSR register applies to the "current" character.
* That's also the reason why we cannot do batched reads when
* asked to check the individual statuses.
- * */
+ */
sts = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG);
max310x_batch_read(port, one->rx_buf, rxlen);
@@ -802,8 +770,10 @@
to_send = (to_send > txlen) ? txlen : to_send;
if (until_end < to_send) {
- /* It's a circ buffer -- wrap around.
- * We could do that in one SPI transaction, but meh. */
+ /*
+ * It's a circ buffer -- wrap around.
+ * We could do that in one SPI transaction, but meh.
+ */
max310x_batch_write(port, xmit->buf + xmit->tail, until_end);
max310x_batch_write(port, xmit->buf, to_send - until_end);
} else {
@@ -848,6 +818,7 @@
if (ists & MAX310X_IRQ_TXEMPTY_BIT)
max310x_start_tx(port);
} while (1);
+
return res;
}
@@ -892,7 +863,8 @@
static unsigned int max310x_get_mctrl(struct uart_port *port)
{
- /* DCD and DSR are not wired and CTS/RTS is handled automatically
+ /*
+ * DCD and DSR are not wired and CTS/RTS is handled automatically
* so just indicate DSR and CAR asserted
*/
return TIOCM_DSR | TIOCM_CAR;
@@ -984,7 +956,8 @@
max310x_port_write(port, MAX310X_XON1_REG, termios->c_cc[VSTART]);
max310x_port_write(port, MAX310X_XOFF1_REG, termios->c_cc[VSTOP]);
- /* Disable transmitter before enabling AutoCTS or auto transmitter
+ /*
+ * Disable transmitter before enabling AutoCTS or auto transmitter
* flow control
*/
if (termios->c_cflag & CRTSCTS || termios->c_iflag & IXOFF) {
@@ -1011,7 +984,8 @@
}
max310x_port_write(port, MAX310X_FLOWCTRL_REG, flow);
- /* Enable transmitter after disabling AutoCTS and auto transmitter
+ /*
+ * Enable transmitter after disabling AutoCTS and auto transmitter
* flow control
*/
if (!(termios->c_cflag & CRTSCTS) && !(termios->c_iflag & IXOFF)) {
@@ -1072,10 +1046,9 @@
static int max310x_startup(struct uart_port *port)
{
- struct max310x_port *s = dev_get_drvdata(port->dev);
unsigned int val;
- s->devtype->power(port, 1);
+ max310x_power(port, 1);
/* Configure MODE1 register */
max310x_port_update(port, MAX310X_MODE1_REG,
@@ -1103,8 +1076,11 @@
MAX310X_MODE2_ECHOSUPR_BIT);
}
- /* Configure flow control levels */
- /* Flow control halt level 96, resume level 48 */
+ /*
+ * Configure flow control levels:
+ * resume: 48
+ * halt: 96
+ */
max310x_port_write(port, MAX310X_FLOWLVL_REG,
MAX310X_FLOWLVL_RES(48) | MAX310X_FLOWLVL_HALT(96));
@@ -1120,12 +1096,10 @@
static void max310x_shutdown(struct uart_port *port)
{
- struct max310x_port *s = dev_get_drvdata(port->dev);
-
/* Disable all interrupts */
max310x_port_write(port, MAX310X_IRQEN_REG, 0);
- s->devtype->power(port, 0);
+ max310x_power(port, 0);
}
static const char *max310x_type(struct uart_port *port)
@@ -1187,7 +1161,7 @@
for (i = 0; i < s->devtype->nr; i++) {
uart_suspend_port(&max310x_uart, &s->p[i].port);
- s->devtype->power(&s->p[i].port, 0);
+ max310x_power(&s->p[i].port, 0);
}
return 0;
@@ -1199,7 +1173,7 @@
int i;
for (i = 0; i < s->devtype->nr; i++) {
- s->devtype->power(&s->p[i].port, 1);
+ max310x_power(&s->p[i].port, 1);
uart_resume_port(&max310x_uart, &s->p[i].port);
}
@@ -1209,7 +1183,7 @@
static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume);
#ifdef CONFIG_GPIOLIB
-static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset)
+static int max310x_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
unsigned int val;
struct max310x_port *s = gpiochip_get_data(chip);
@@ -1220,7 +1194,7 @@
return !!((val >> 4) & (1 << (offset % 4)));
}
-static void max310x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+static void max310x_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
{
struct max310x_port *s = gpiochip_get_data(chip);
struct uart_port *port = &s->p[offset / 4].port;
@@ -1229,7 +1203,7 @@
value ? 1 << (offset % 4) : 0);
}
-static int max310x_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+static int max310x_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
{
struct max310x_port *s = gpiochip_get_data(chip);
struct uart_port *port = &s->p[offset / 4].port;
@@ -1240,7 +1214,7 @@
}
static int max310x_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
+ unsigned int offset, int value)
{
struct max310x_port *s = gpiochip_get_data(chip);
struct uart_port *port = &s->p[offset / 4].port;
@@ -1296,10 +1270,9 @@
/* Alloc port structure */
s = devm_kzalloc(dev, struct_size(s, p, devtype->nr), GFP_KERNEL);
- if (!s) {
- dev_err(dev, "Error allocating port structure\n");
- return -ENOMEM;
- }
+ if (!s)
+ return dev_err_probe(dev, -ENOMEM,
+ "Error allocating port structure\n");
/* Always ask for fixed clock rate from a property. */
device_property_read_u32(dev, "clock-frequency", &uartclk);
@@ -1320,8 +1293,7 @@
if (freq == 0)
freq = uartclk;
if (freq == 0) {
- dev_err(dev, "Cannot get clock rate\n");
- ret = -EINVAL;
+ ret = dev_err_probe(dev, -EINVAL, "Cannot get clock rate\n");
goto out_clk;
}
@@ -1345,7 +1317,7 @@
dev_set_drvdata(dev, s);
/* Check device to ensure we are talking to what we expect */
- ret = devtype->detect(dev);
+ ret = max310x_detect(dev);
if (ret)
goto out_clk;
@@ -1427,14 +1399,13 @@
/* Register port */
ret = uart_add_one_port(&max310x_uart, &s->p[i].port);
- if (ret) {
- s->p[i].port.dev = NULL;
+ if (ret)
goto out_uart;
- }
+
set_bit(line, max310x_lines);
/* Go to suspend mode */
- devtype->power(&s->p[i].port, 0);
+ max310x_power(&s->p[i].port, 0);
}
#ifdef CONFIG_GPIOLIB
@@ -1461,14 +1432,12 @@
if (!ret)
return 0;
- dev_err(dev, "Unable to reguest IRQ %i\n", irq);
+ dev_err(dev, "Unable to request IRQ %i\n", irq);
out_uart:
for (i = 0; i < devtype->nr; i++) {
- if (s->p[i].port.dev) {
+ if (test_and_clear_bit(s->p[i].port.line, max310x_lines))
uart_remove_one_port(&max310x_uart, &s->p[i].port);
- clear_bit(s->p[i].port.line, max310x_lines);
- }
}
out_clk:
@@ -1486,9 +1455,11 @@
cancel_work_sync(&s->p[i].tx_work);
cancel_work_sync(&s->p[i].md_work);
cancel_work_sync(&s->p[i].rs_work);
- uart_remove_one_port(&max310x_uart, &s->p[i].port);
- clear_bit(s->p[i].port.line, max310x_lines);
- s->devtype->power(&s->p[i].port, 0);
+
+ if (test_and_clear_bit(s->p[i].port.line, max310x_lines))
+ uart_remove_one_port(&max310x_uart, &s->p[i].port);
+
+ max310x_power(&s->p[i].port, 0);
}
clk_disable_unprepare(s->clk);
@@ -1518,6 +1489,19 @@
.max_raw_write = MAX310X_FIFO_SIZE,
};
+static const char *max310x_regmap_name(u8 port_id)
+{
+ switch (port_id) {
+ case 0: return "port0";
+ case 1: return "port1";
+ case 2: return "port2";
+ case 3: return "port3";
+ default:
+ WARN_ON(true);
+ return NULL;
+ }
+}
+
#ifdef CONFIG_SPI_MASTER
static int max310x_spi_extended_reg_enable(struct device *dev, bool enable)
{
@@ -1529,13 +1513,13 @@
static const struct max310x_if_cfg __maybe_unused max310x_spi_if_cfg = {
.extended_reg_enable = max310x_spi_extended_reg_enable,
- .rev_id_reg = MAX310X_SPI_REVID_EXTREG,
+ .rev_id_offset = MAX310X_EXTREG_START,
};
static int max310x_spi_probe(struct spi_device *spi)
{
const struct max310x_devtype *devtype;
- struct regmap *regmaps[4];
+ struct regmap *regmaps[MAX310X_MAX_PORTS];
unsigned int i;
int ret;
@@ -1547,12 +1531,14 @@
if (ret)
return ret;
- devtype = device_get_match_data(&spi->dev);
+ devtype = spi_get_device_match_data(spi);
if (!devtype)
- devtype = (struct max310x_devtype *)spi_get_device_id(spi)->driver_data;
+ return dev_err_probe(&spi->dev, -ENODEV, "Failed to match device\n");
for (i = 0; i < devtype->nr; i++) {
u8 port_mask = i * 0x20;
+
+ regcfg.name = max310x_regmap_name(i);
regcfg.read_flag_mask = port_mask;
regcfg.write_flag_mask = port_mask | MAX310X_WRITE_BIT;
regmaps[i] = devm_regmap_init_spi(spi, ®cfg);
@@ -1600,7 +1586,7 @@
.writeable_reg = max310x_reg_writeable,
.volatile_reg = max310x_reg_volatile,
.precious_reg = max310x_reg_precious,
- .max_register = MAX310X_I2C_REVID_EXTREG,
+ .max_register = MAX310X_REVID_EXTREG,
.writeable_noinc_reg = max310x_reg_noinc,
.readable_noinc_reg = max310x_reg_noinc,
.max_raw_read = MAX310X_FIFO_SIZE,
@@ -1609,7 +1595,7 @@
static const struct max310x_if_cfg max310x_i2c_if_cfg = {
.extended_reg_enable = max310x_i2c_extended_reg_enable,
- .rev_id_reg = MAX310X_I2C_REVID_EXTREG,
+ .rev_id_offset = 0, /* No offset in I2C mode. */
};
static unsigned short max310x_i2c_slave_addr(unsigned short addr,
@@ -1619,10 +1605,10 @@
* For MAX14830 and MAX3109, the slave address depends on what the
* A0 and A1 pins are tied to.
* See Table I2C Address Map of the datasheet.
- * Based on that table, the following formulas were determined.
- * UART1 - UART0 = 0x10
- * UART2 - UART1 = 0x20 + 0x10
- * UART3 - UART2 = 0x10
+ * Based on that table, the following formulas were determined:
+ * UART1 - UART0 = 0x10
+ * UART2 - UART1 = 0x20 + 0x10
+ * UART3 - UART2 = 0x10
*/
addr -= nr * 0x10;
@@ -1635,20 +1621,24 @@
static int max310x_i2c_probe(struct i2c_client *client)
{
- const struct max310x_devtype *devtype =
- device_get_match_data(&client->dev);
+ const struct max310x_devtype *devtype;
struct i2c_client *port_client;
- struct regmap *regmaps[4];
+ struct regmap *regmaps[MAX310X_MAX_PORTS];
unsigned int i;
u8 port_addr;
+ devtype = i2c_get_match_data(client);
+ if (!devtype)
+ return dev_err_probe(&client->dev, -ENODEV, "Failed to match device\n");
+
if (client->addr < devtype->slave_addr.min ||
- client->addr > devtype->slave_addr.max)
+ client->addr > devtype->slave_addr.max)
return dev_err_probe(&client->dev, -EINVAL,
"Slave addr 0x%x outside of range [0x%x, 0x%x]\n",
client->addr, devtype->slave_addr.min,
devtype->slave_addr.max);
+ regcfg_i2c.name = max310x_regmap_name(0);
regmaps[0] = devm_regmap_init_i2c(client, ®cfg_i2c);
for (i = 1; i < devtype->nr; i++) {
@@ -1657,6 +1647,7 @@
client->adapter,
port_addr);
+ regcfg_i2c.name = max310x_regmap_name(i);
regmaps[i] = devm_regmap_init_i2c(port_client, ®cfg_i2c);
}
@@ -1669,6 +1660,15 @@
max310x_remove(&client->dev);
}
+static const struct i2c_device_id max310x_i2c_id_table[] = {
+ { "max3107", (kernel_ulong_t)&max3107_devtype, },
+ { "max3108", (kernel_ulong_t)&max3108_devtype, },
+ { "max3109", (kernel_ulong_t)&max3109_devtype, },
+ { "max14830", (kernel_ulong_t)&max14830_devtype, },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max310x_i2c_id_table);
+
static struct i2c_driver max310x_i2c_driver = {
.driver = {
.name = MAX310X_NAME,
@@ -1677,6 +1677,7 @@
},
.probe = max310x_i2c_probe,
.remove = max310x_i2c_remove,
+ .id_table = max310x_i2c_id_table,
};
#endif
diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c
index 8690a45..b0604d6 100644
--- a/drivers/tty/serial/mcf.c
+++ b/drivers/tty/serial/mcf.c
@@ -470,33 +470,6 @@
#if defined(CONFIG_SERIAL_MCF_CONSOLE)
/****************************************************************************/
-int __init early_mcf_setup(struct mcf_platform_uart *platp)
-{
- struct uart_port *port;
- int i;
-
- for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) {
- port = &mcf_ports[i].port;
-
- port->line = i;
- port->type = PORT_MCF;
- port->mapbase = platp[i].mapbase;
- port->membase = (platp[i].membase) ? platp[i].membase :
- (unsigned char __iomem *) port->mapbase;
- port->iotype = SERIAL_IO_MEM;
- port->irq = platp[i].irq;
- port->uartclk = MCF_BUSCLK;
- port->flags = UPF_BOOT_AUTOCONF;
- port->rs485_config = mcf_config_rs485;
- port->rs485_supported = mcf_rs485_supported;
- port->ops = &mcf_uart_ops;
- }
-
- return 0;
-}
-
-/****************************************************************************/
-
static void mcf_console_putc(struct console *co, const char c)
{
struct uart_port *port = &(mcf_ports + co->index)->port;
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 8395688..6feac45 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -220,7 +220,7 @@
continue;
}
- if (uart_handle_sysrq_char(port, ch))
+ if (uart_prepare_sysrq_char(port, ch))
continue;
if ((status & port->ignore_status_mask) == 0)
@@ -248,7 +248,7 @@
meson_uart_start_tx(port);
}
- uart_port_unlock(port);
+ uart_unlock_and_check_sysrq(port);
return IRQ_HANDLED;
}
@@ -556,18 +556,13 @@
u_int count)
{
unsigned long flags;
- int locked;
+ int locked = 1;
u32 val, tmp;
- local_irq_save(flags);
- if (port->sysrq) {
- locked = 0;
- } else if (oops_in_progress) {
- locked = uart_port_trylock(port);
- } else {
- uart_port_lock(port);
- locked = 1;
- }
+ if (oops_in_progress)
+ locked = uart_port_trylock_irqsave(port, &flags);
+ else
+ uart_port_lock_irqsave(port, &flags);
val = readl(port->membase + AML_UART_CONTROL);
tmp = val & ~(AML_UART_TX_INT_EN | AML_UART_RX_INT_EN);
@@ -577,8 +572,7 @@
writel(val, port->membase + AML_UART_CONTROL);
if (locked)
- uart_port_unlock(port);
- local_irq_restore(flags);
+ uart_port_unlock_irqrestore(port, flags);
}
static void meson_serial_console_write(struct console *co, const char *s,
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index e24204a..d27c4c8 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -588,16 +588,14 @@
if (!(port->read_status_mask & MSM_UART_SR_RX_BREAK))
flag = TTY_NORMAL;
- uart_port_unlock_irqrestore(port, flags);
- sysrq = uart_handle_sysrq_char(port, dma->virt[i]);
- uart_port_lock_irqsave(port, &flags);
+ sysrq = uart_prepare_sysrq_char(port, dma->virt[i]);
if (!sysrq)
tty_insert_flip_char(tport, dma->virt[i], flag);
}
msm_start_rx_dma(msm_port);
done:
- uart_port_unlock_irqrestore(port, flags);
+ uart_unlock_and_check_sysrq_irqrestore(port, flags);
if (count)
tty_flip_buffer_push(tport);
@@ -763,9 +761,7 @@
if (!(port->read_status_mask & MSM_UART_SR_RX_BREAK))
flag = TTY_NORMAL;
- uart_port_unlock(port);
- sysrq = uart_handle_sysrq_char(port, buf[i]);
- uart_port_lock(port);
+ sysrq = uart_prepare_sysrq_char(port, buf[i]);
if (!sysrq)
tty_insert_flip_char(tport, buf[i], flag);
}
@@ -825,9 +821,7 @@
else if (sr & MSM_UART_SR_PAR_FRAME_ERR)
flag = TTY_FRAME;
- uart_port_unlock(port);
- sysrq = uart_handle_sysrq_char(port, c);
- uart_port_lock(port);
+ sysrq = uart_prepare_sysrq_char(port, c);
if (!sysrq)
tty_insert_flip_char(tport, c, flag);
}
@@ -948,11 +942,10 @@
struct uart_port *port = dev_id;
struct msm_port *msm_port = to_msm_port(port);
struct msm_dma *dma = &msm_port->rx_dma;
- unsigned long flags;
unsigned int misr;
u32 val;
- uart_port_lock_irqsave(port, &flags);
+ uart_port_lock(port);
misr = msm_read(port, MSM_UART_MISR);
msm_write(port, 0, MSM_UART_IMR); /* disable interrupt */
@@ -984,7 +977,7 @@
msm_handle_delta_cts(port);
msm_write(port, msm_port->imr, MSM_UART_IMR); /* restore interrupt */
- uart_port_unlock_irqrestore(port, flags);
+ uart_unlock_and_check_sysrq(port);
return IRQ_HANDLED;
}
@@ -1621,14 +1614,10 @@
num_newlines++;
count += num_newlines;
- local_irq_save(flags);
-
- if (port->sysrq)
- locked = 0;
- else if (oops_in_progress)
- locked = uart_port_trylock(port);
+ if (oops_in_progress)
+ locked = uart_port_trylock_irqsave(port, &flags);
else
- uart_port_lock(port);
+ uart_port_lock_irqsave(port, &flags);
if (is_uartdm)
msm_reset_dm_count(port, count);
@@ -1667,9 +1656,7 @@
}
if (locked)
- uart_port_unlock(port);
-
- local_irq_restore(flags);
+ uart_port_unlock_irqrestore(port, flags);
}
static void msm_console_write(struct console *co, const char *s,
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index f5a0b40..9be1c87 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -508,7 +508,7 @@
up->port.icount.rx++;
- if (uart_handle_sysrq_char(&up->port, ch))
+ if (uart_prepare_sysrq_char(&up->port, ch))
return;
uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, TTY_NORMAL);
@@ -563,7 +563,7 @@
}
} while (max_count--);
- uart_port_unlock(&up->port);
+ uart_unlock_and_check_sysrq(&up->port);
tty_flip_buffer_push(&up->port.state->port);
@@ -1212,13 +1212,10 @@
unsigned int ier;
int locked = 1;
- local_irq_save(flags);
- if (up->port.sysrq)
- locked = 0;
- else if (oops_in_progress)
- locked = uart_port_trylock(&up->port);
+ if (oops_in_progress)
+ locked = uart_port_trylock_irqsave(&up->port, &flags);
else
- uart_port_lock(&up->port);
+ uart_port_lock_irqsave(&up->port, &flags);
/*
* First save the IER then disable the interrupts
@@ -1245,8 +1242,7 @@
check_modem_status(up);
if (locked)
- uart_port_unlock(&up->port);
- local_irq_restore(flags);
+ uart_port_unlock_irqrestore(&up->port, flags);
}
static int __init
diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c
index d9fe853..8b60ac0 100644
--- a/drivers/tty/serial/owl-uart.c
+++ b/drivers/tty/serial/owl-uart.c
@@ -199,6 +199,7 @@
stat = owl_uart_read(port, OWL_UART_STAT);
while (!(stat & OWL_UART_STAT_RFEM)) {
char flag = TTY_NORMAL;
+ bool sysrq;
if (stat & OWL_UART_STAT_RXER)
port->icount.overrun++;
@@ -217,7 +218,9 @@
val = owl_uart_read(port, OWL_UART_RXDAT);
val &= 0xff;
- if ((stat & port->ignore_status_mask) == 0)
+ sysrq = uart_prepare_sysrq_char(port, val);
+
+ if (!sysrq && (stat & port->ignore_status_mask) == 0)
tty_insert_flip_char(&port->state->port, val, flag);
stat = owl_uart_read(port, OWL_UART_STAT);
@@ -229,10 +232,9 @@
static irqreturn_t owl_uart_irq(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- unsigned long flags;
u32 stat;
- uart_port_lock_irqsave(port, &flags);
+ uart_port_lock(port);
stat = owl_uart_read(port, OWL_UART_STAT);
@@ -246,7 +248,7 @@
stat |= OWL_UART_STAT_RIP | OWL_UART_STAT_TIP;
owl_uart_write(port, stat, OWL_UART_STAT);
- uart_port_unlock_irqrestore(port, flags);
+ uart_unlock_and_check_sysrq(port);
return IRQ_HANDLED;
}
@@ -508,18 +510,12 @@
{
u32 old_ctl, val;
unsigned long flags;
- int locked;
+ int locked = 1;
- local_irq_save(flags);
-
- if (port->sysrq)
- locked = 0;
- else if (oops_in_progress)
- locked = uart_port_trylock(port);
- else {
- uart_port_lock(port);
- locked = 1;
- }
+ if (oops_in_progress)
+ locked = uart_port_trylock_irqsave(port, &flags);
+ else
+ uart_port_lock_irqsave(port, &flags);
old_ctl = owl_uart_read(port, OWL_UART_CTL);
val = old_ctl | OWL_UART_CTL_TRFS_TX;
@@ -541,9 +537,7 @@
owl_uart_write(port, old_ctl, OWL_UART_CTL);
if (locked)
- uart_port_unlock(port);
-
- local_irq_restore(flags);
+ uart_port_unlock_irqrestore(port, flags);
}
static void owl_uart_console_write(struct console *co, const char *s,
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 436cc6d..89257cd 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -237,9 +237,6 @@
#define IRQ_NAME_SIZE 17
char irq_name[IRQ_NAME_SIZE];
-
- /* protect the eg20t_port private structure and io access to membase */
- spinlock_t lock;
};
/**
@@ -567,7 +564,7 @@
if (uart_handle_break(port))
continue;
}
- if (uart_handle_sysrq_char(port, rbr))
+ if (uart_prepare_sysrq_char(port, rbr))
continue;
buf[i++] = rbr;
@@ -599,16 +596,14 @@
iowrite8(lcr, priv->membase + UART_LCR);
}
-static int push_rx(struct eg20t_port *priv, const unsigned char *buf,
- int size)
+static void push_rx(struct eg20t_port *priv, const unsigned char *buf,
+ int size)
{
struct uart_port *port = &priv->port;
struct tty_port *tport = &port->state->port;
tty_insert_flip_string(tport, buf, size);
tty_flip_buffer_push(tport);
-
- return 0;
}
static int dma_push_rx(struct eg20t_port *priv, int size)
@@ -761,7 +756,7 @@
{
struct pch_uart_buffer *buf;
int rx_size;
- int ret;
+
if (!priv->start_rx) {
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
PCH_UART_HAL_RX_ERR_INT);
@@ -770,19 +765,12 @@
buf = &priv->rxbuf;
do {
rx_size = pch_uart_hal_read(priv, buf->buf, buf->size);
- ret = push_rx(priv, buf->buf, rx_size);
- if (ret)
- return 0;
+ push_rx(priv, buf->buf, rx_size);
} while (rx_size == buf->size);
return PCH_UART_HANDLED_RX_INT;
}
-static int handle_rx(struct eg20t_port *priv)
-{
- return handle_rx_to(priv);
-}
-
static int dma_handle_rx(struct eg20t_port *priv)
{
struct uart_port *port = &priv->port;
@@ -1019,11 +1007,10 @@
u8 lsr;
int ret = 0;
unsigned char iid;
- unsigned long flags;
int next = 1;
u8 msr;
- spin_lock_irqsave(&priv->lock, flags);
+ uart_port_lock(&priv->port);
handled = 0;
while (next) {
iid = pch_uart_hal_get_iid(priv);
@@ -1051,7 +1038,7 @@
PCH_UART_HAL_RX_INT |
PCH_UART_HAL_RX_ERR_INT);
} else {
- ret = handle_rx(priv);
+ ret = handle_rx_to(priv);
}
break;
case PCH_UART_IID_RDR_TO: /* Received Data Ready
@@ -1083,7 +1070,7 @@
handled |= (unsigned int)ret;
}
- spin_unlock_irqrestore(&priv->lock, flags);
+ uart_unlock_and_check_sysrq(&priv->port);
return IRQ_RETVAL(handled);
}
@@ -1194,9 +1181,9 @@
unsigned long flags;
priv = container_of(port, struct eg20t_port, port);
- spin_lock_irqsave(&priv->lock, flags);
+ uart_port_lock_irqsave(&priv->port, &flags);
pch_uart_hal_set_break(priv, ctl);
- spin_unlock_irqrestore(&priv->lock, flags);
+ uart_port_unlock_irqrestore(&priv->port, flags);
}
/* Grab any interrupt resources and initialise any low level driver state. */
@@ -1346,8 +1333,7 @@
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
- spin_lock_irqsave(&priv->lock, flags);
- uart_port_lock(port);
+ uart_port_lock_irqsave(port, &flags);
uart_update_timeout(port, termios->c_cflag, baud);
rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb);
@@ -1360,8 +1346,7 @@
tty_termios_encode_baud_rate(termios, baud, baud);
out:
- uart_port_unlock(port);
- spin_unlock_irqrestore(&priv->lock, flags);
+ uart_port_unlock_irqrestore(port, flags);
}
static const char *pch_uart_type(struct uart_port *port)
@@ -1565,27 +1550,17 @@
{
struct eg20t_port *priv;
unsigned long flags;
- int priv_locked = 1;
- int port_locked = 1;
+ int locked = 1;
u8 ier;
priv = pch_uart_ports[co->index];
touch_nmi_watchdog();
- local_irq_save(flags);
- if (priv->port.sysrq) {
- /* call to uart_handle_sysrq_char already took the priv lock */
- priv_locked = 0;
- /* serial8250_handle_port() already took the port lock */
- port_locked = 0;
- } else if (oops_in_progress) {
- priv_locked = spin_trylock(&priv->lock);
- port_locked = uart_port_trylock(&priv->port);
- } else {
- spin_lock(&priv->lock);
- uart_port_lock(&priv->port);
- }
+ if (oops_in_progress)
+ locked = uart_port_trylock_irqsave(&priv->port, &flags);
+ else
+ uart_port_lock_irqsave(&priv->port, &flags);
/*
* First save the IER then disable the interrupts
@@ -1603,11 +1578,8 @@
wait_for_xmitr(priv, UART_LSR_BOTH_EMPTY);
iowrite8(ier, priv->membase + UART_IER);
- if (port_locked)
- uart_port_unlock(&priv->port);
- if (priv_locked)
- spin_unlock(&priv->lock);
- local_irq_restore(flags);
+ if (locked)
+ uart_port_unlock_irqrestore(&priv->port, flags);
}
static int __init pch_console_setup(struct console *co, char *options)
@@ -1704,8 +1676,6 @@
pci_enable_msi(pdev);
pci_set_master(pdev);
- spin_lock_init(&priv->lock);
-
iobase = pci_resource_start(pdev, 0);
mapbase = pci_resource_start(pdev, 1);
priv->mapbase = mapbase;
@@ -1735,8 +1705,6 @@
KBUILD_MODNAME ":" PCH_UART_DRIVER_DEVICE "%d",
priv->port.line);
- spin_lock_init(&priv->port.lock);
-
pci_set_drvdata(pdev, priv);
priv->trigger_level = 1;
priv->fcr = 0;
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 732d821..05d97e8 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -1714,18 +1714,13 @@
return uart_add_one_port(&pmz_uart_reg, &uap->port);
}
-static int __exit pmz_detach(struct platform_device *pdev)
+static void __exit pmz_detach(struct platform_device *pdev)
{
struct uart_pmac_port *uap = platform_get_drvdata(pdev);
- if (!uap)
- return -ENODEV;
-
uart_remove_one_port(&pmz_uart_reg, &uap->port);
uap->port.dev = NULL;
-
- return 0;
}
#endif /* !CONFIG_PPC_PMAC */
@@ -1794,7 +1789,7 @@
#else
static struct platform_driver pmz_driver = {
- .remove = __exit_p(pmz_detach),
+ .remove_new = __exit_p(pmz_detach),
.driver = {
.name = "scc",
},
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 46e70e1..e395ff2 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -151,7 +151,7 @@
flag = TTY_FRAME;
}
- if (uart_handle_sysrq_char(&up->port, ch))
+ if (uart_prepare_sysrq_char(&up->port, ch))
goto ignore_char;
uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
@@ -232,7 +232,7 @@
check_modem_status(up);
if (lsr & UART_LSR_THRE)
transmit_chars(up);
- uart_port_unlock(&up->port);
+ uart_unlock_and_check_sysrq(&up->port);
return IRQ_HANDLED;
}
@@ -604,13 +604,10 @@
int locked = 1;
clk_enable(up->clk);
- local_irq_save(flags);
- if (up->port.sysrq)
- locked = 0;
- else if (oops_in_progress)
- locked = uart_port_trylock(&up->port);
+ if (oops_in_progress)
+ locked = uart_port_trylock_irqsave(&up->port, &flags);
else
- uart_port_lock(&up->port);
+ uart_port_lock_irqsave(&up->port, &flags);
/*
* First save the IER then disable the interrupts
@@ -628,10 +625,8 @@
serial_out(up, UART_IER, ier);
if (locked)
- uart_port_unlock(&up->port);
- local_irq_restore(flags);
+ uart_port_unlock_irqrestore(&up->port, flags);
clk_disable(up->clk);
-
}
#ifdef CONFIG_CONSOLE_POLL
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 99e0873..f9f7ac1 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -488,18 +488,16 @@
geni_status = readl(uport->membase + SE_GENI_STATUS);
- /* Cancel the current write to log the fault */
if (!locked) {
- geni_se_cancel_m_cmd(&port->se);
- if (!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
- M_CMD_CANCEL_EN, true)) {
- geni_se_abort_m_cmd(&port->se);
- qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
- M_CMD_ABORT_EN, true);
- writel(M_CMD_ABORT_EN, uport->membase +
- SE_GENI_M_IRQ_CLEAR);
- }
- writel(M_CMD_CANCEL_EN, uport->membase + SE_GENI_M_IRQ_CLEAR);
+ /*
+ * We can only get here if an oops is in progress then we were
+ * unable to get the lock. This means we can't safely access
+ * our state variables like tx_remaining. About the best we
+ * can do is wait for the FIFO to be empty before we start our
+ * transfer, so we'll do that.
+ */
+ qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS,
+ M_TX_FIFO_NOT_EMPTY_EN, false);
} else if ((geni_status & M_GENI_CMD_ACTIVE) && !port->tx_remaining) {
/*
* It seems we can't interrupt existing transfers if all data
@@ -516,11 +514,12 @@
__qcom_geni_serial_console_write(uport, s, count);
- if (port->tx_remaining)
- qcom_geni_serial_setup_tx(uport, port->tx_remaining);
- if (locked)
+ if (locked) {
+ if (port->tx_remaining)
+ qcom_geni_serial_setup_tx(uport, port->tx_remaining);
uart_port_unlock_irqrestore(uport, flags);
+ }
}
static void handle_rx_console(struct uart_port *uport, u32 bytes, bool drop)
diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c
index 13deb35..82def9b 100644
--- a/drivers/tty/serial/rda-uart.c
+++ b/drivers/tty/serial/rda-uart.c
@@ -394,7 +394,8 @@
val &= 0xff;
port->icount.rx++;
- tty_insert_flip_char(&port->state->port, val, flag);
+ if (!uart_prepare_sysrq_char(port, val))
+ tty_insert_flip_char(&port->state->port, val, flag);
status = rda_uart_read(port, RDA_UART_STATUS);
}
@@ -405,10 +406,9 @@
static irqreturn_t rda_interrupt(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- unsigned long flags;
u32 val, irq_mask;
- uart_port_lock_irqsave(port, &flags);
+ uart_port_lock(port);
/* Clear IRQ cause */
val = rda_uart_read(port, RDA_UART_IRQ_CAUSE);
@@ -425,7 +425,7 @@
rda_uart_send_chars(port);
}
- uart_port_unlock_irqrestore(port, flags);
+ uart_unlock_and_check_sysrq(port);
return IRQ_HANDLED;
}
@@ -590,18 +590,12 @@
{
u32 old_irq_mask;
unsigned long flags;
- int locked;
+ int locked = 1;
- local_irq_save(flags);
-
- if (port->sysrq) {
- locked = 0;
- } else if (oops_in_progress) {
- locked = uart_port_trylock(port);
- } else {
- uart_port_lock(port);
- locked = 1;
- }
+ if (oops_in_progress)
+ locked = uart_port_trylock_irqsave(port, &flags);
+ else
+ uart_port_lock_irqsave(port, &flags);
old_irq_mask = rda_uart_read(port, RDA_UART_IRQ_MASK);
rda_uart_write(port, 0, RDA_UART_IRQ_MASK);
@@ -615,9 +609,7 @@
rda_uart_write(port, old_irq_mask, RDA_UART_IRQ_MASK);
if (locked)
- uart_port_unlock(port);
-
- local_irq_restore(flags);
+ uart_port_unlock_irqrestore(port, flags);
}
static void rda_uart_console_write(struct console *co, const char *s,
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 71d17d8..a2d07e0 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -21,26 +21,28 @@
* BJD, 04-Nov-2004
*/
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-#include <linux/slab.h>
-#include <linux/math.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/sysrq.h>
#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/serial_s3c.h>
-#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/math.h>
+#include <linux/module.h>
#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
+#include <linux/slab.h>
+#include <linux/sysrq.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/types.h>
+
#include <asm/irq.h>
/* UART name and device definitions */
@@ -73,21 +75,21 @@
enum s3c24xx_port_type type;
unsigned int port_type;
unsigned int fifosize;
- unsigned long rx_fifomask;
- unsigned long rx_fifoshift;
- unsigned long rx_fifofull;
- unsigned long tx_fifomask;
- unsigned long tx_fifoshift;
- unsigned long tx_fifofull;
- unsigned int def_clk_sel;
- unsigned long num_clks;
- unsigned long clksel_mask;
- unsigned long clksel_shift;
- unsigned long ucon_mask;
+ u32 rx_fifomask;
+ u32 rx_fifoshift;
+ u32 rx_fifofull;
+ u32 tx_fifomask;
+ u32 tx_fifoshift;
+ u32 tx_fifofull;
+ u32 clksel_mask;
+ u32 clksel_shift;
+ u32 ucon_mask;
+ u8 def_clk_sel;
+ u8 num_clks;
+ u8 iotype;
/* uart port features */
-
- unsigned int has_divslot:1;
+ bool has_divslot;
};
struct s3c24xx_serial_drv_data {
@@ -196,7 +198,7 @@
/* Byte-order aware bit setting/clearing functions. */
static inline void s3c24xx_set_bit(const struct uart_port *port, int idx,
- unsigned int reg)
+ u32 reg)
{
unsigned long flags;
u32 val;
@@ -209,7 +211,7 @@
}
static inline void s3c24xx_clear_bit(const struct uart_port *port, int idx,
- unsigned int reg)
+ u32 reg)
{
unsigned long flags;
u32 val;
@@ -233,7 +235,7 @@
return to_platform_device(port->dev)->name;
}
-static int s3c24xx_serial_txempty_nofifo(const struct uart_port *port)
+static bool s3c24xx_serial_txempty_nofifo(const struct uart_port *port)
{
return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE;
}
@@ -242,8 +244,8 @@
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
unsigned long flags;
- unsigned int ucon, ufcon;
int count = 10000;
+ u32 ucon, ufcon;
uart_port_lock_irqsave(port, &flags);
@@ -266,7 +268,7 @@
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
unsigned long flags;
- unsigned int ucon;
+ u32 ucon;
uart_port_lock_irqsave(port, &flags);
@@ -587,8 +589,8 @@
return ourport->cfg;
}
-static int s3c24xx_serial_rx_fifocnt(const struct s3c24xx_uart_port *ourport,
- unsigned long ufstat)
+static unsigned int
+s3c24xx_serial_rx_fifocnt(const struct s3c24xx_uart_port *ourport, u32 ufstat)
{
const struct s3c24xx_uart_info *info = ourport->info;
@@ -660,7 +662,7 @@
static void enable_rx_dma(struct s3c24xx_uart_port *ourport)
{
struct uart_port *port = &ourport->port;
- unsigned int ucon;
+ u32 ucon;
/* set Rx mode to DMA mode */
ucon = rd_regl(port, S3C2410_UCON);
@@ -683,7 +685,7 @@
static void enable_rx_pio(struct s3c24xx_uart_port *ourport)
{
struct uart_port *port = &ourport->port;
- unsigned int ucon;
+ u32 ucon;
/* set Rx mode to DMA mode */
ucon = rd_regl(port, S3C2410_UCON);
@@ -708,13 +710,14 @@
static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id)
{
- unsigned int utrstat, received;
struct s3c24xx_uart_port *ourport = dev_id;
struct uart_port *port = &ourport->port;
struct s3c24xx_uart_dma *dma = ourport->dma;
struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port);
struct tty_port *t = &port->state->port;
struct dma_tx_state state;
+ unsigned int received;
+ u32 utrstat;
utrstat = rd_regl(port, S3C2410_UTRSTAT);
rd_regl(port, S3C2410_UFSTAT);
@@ -756,9 +759,9 @@
static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
{
struct uart_port *port = &ourport->port;
- unsigned int ufcon, ufstat, uerstat;
+ unsigned int max_count = port->fifosize;
unsigned int fifocnt = 0;
- int max_count = port->fifosize;
+ u32 ufcon, ufstat, uerstat;
u8 ch, flag;
while (max_count-- > 0) {
@@ -778,7 +781,7 @@
ch = rd_reg(port, S3C2410_URXH);
if (port->flags & UPF_CONS_FLOW) {
- int txe = s3c24xx_serial_txempty_nofifo(port);
+ bool txe = s3c24xx_serial_txempty_nofifo(port);
if (ourport->rx_enabled) {
if (!txe) {
@@ -942,7 +945,7 @@
{
const struct s3c24xx_uart_port *ourport = id;
const struct uart_port *port = &ourport->port;
- unsigned int pend = rd_regl(port, S3C64XX_UINTP);
+ u32 pend = rd_regl(port, S3C64XX_UINTP);
irqreturn_t ret = IRQ_HANDLED;
if (pend & S3C64XX_UINTM_RXD_MSK) {
@@ -961,7 +964,7 @@
{
const struct s3c24xx_uart_port *ourport = id;
const struct uart_port *port = &ourport->port;
- unsigned int pend = rd_regl(port, S3C2410_UTRSTAT);
+ u32 pend = rd_regl(port, S3C2410_UTRSTAT);
irqreturn_t ret = IRQ_NONE;
if (pend & (APPLE_S5L_UTRSTAT_RXTHRESH | APPLE_S5L_UTRSTAT_RXTO)) {
@@ -980,24 +983,23 @@
static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
{
const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
- unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
- unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
+ u32 ufstat = rd_regl(port, S3C2410_UFSTAT);
+ u32 ufcon = rd_regl(port, S3C2410_UFCON);
if (ufcon & S3C2410_UFCON_FIFOMODE) {
- if ((ufstat & info->tx_fifomask) != 0 ||
+ if ((ufstat & info->tx_fifomask) ||
(ufstat & info->tx_fifofull))
return 0;
-
- return 1;
+ return TIOCSER_TEMT;
}
- return s3c24xx_serial_txempty_nofifo(port);
+ return s3c24xx_serial_txempty_nofifo(port) ? TIOCSER_TEMT : 0;
}
/* no modem control lines */
static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
{
- unsigned int umstat = rd_reg(port, S3C2410_UMSTAT);
+ u32 umstat = rd_reg(port, S3C2410_UMSTAT);
if (umstat & S3C2410_UMSTAT_CTS)
return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
@@ -1007,8 +1009,8 @@
static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- unsigned int umcon = rd_regl(port, S3C2410_UMCON);
- unsigned int ucon = rd_regl(port, S3C2410_UCON);
+ u32 umcon = rd_regl(port, S3C2410_UMCON);
+ u32 ucon = rd_regl(port, S3C2410_UCON);
if (mctrl & TIOCM_RTS)
umcon |= S3C2410_UMCOM_RTS_LOW;
@@ -1028,7 +1030,7 @@
static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
{
unsigned long flags;
- unsigned int ucon;
+ u32 ucon;
uart_port_lock_irqsave(port, &flags);
@@ -1186,7 +1188,7 @@
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
- unsigned int ucon;
+ u32 ucon;
ucon = rd_regl(port, S3C2410_UCON);
ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK |
@@ -1212,7 +1214,7 @@
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
unsigned long flags;
- unsigned int ufcon;
+ u32 ufcon;
int ret;
wr_regl(port, S3C64XX_UINTM, 0xf);
@@ -1257,7 +1259,7 @@
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
unsigned long flags;
- unsigned int ufcon;
+ u32 ufcon;
int ret;
wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS);
@@ -1292,8 +1294,6 @@
return ret;
}
-/* power power management control */
-
static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
unsigned int old)
{
@@ -1339,10 +1339,10 @@
#define MAX_CLK_NAME_LENGTH 15
-static inline int s3c24xx_serial_getsource(struct uart_port *port)
+static inline u8 s3c24xx_serial_getsource(struct uart_port *port)
{
const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
- unsigned int ucon;
+ u32 ucon;
if (info->num_clks == 1)
return 0;
@@ -1352,11 +1352,10 @@
return ucon >> info->clksel_shift;
}
-static void s3c24xx_serial_setsource(struct uart_port *port,
- unsigned int clk_sel)
+static void s3c24xx_serial_setsource(struct uart_port *port, u8 clk_sel)
{
const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
- unsigned int ucon;
+ u32 ucon;
if (info->num_clks == 1)
return;
@@ -1372,14 +1371,15 @@
static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
unsigned int req_baud, struct clk **best_clk,
- unsigned int *clk_num)
+ u8 *clk_num)
{
const struct s3c24xx_uart_info *info = ourport->info;
struct clk *clk;
unsigned long rate;
- unsigned int cnt, baud, quot, best_quot = 0;
+ unsigned int baud, quot, best_quot = 0;
char clkname[MAX_CLK_NAME_LENGTH];
int calc_deviation, deviation = (1 << 30) - 1;
+ u8 cnt;
for (cnt = 0; cnt < info->num_clks; cnt++) {
/* Keep selected clock if provided */
@@ -1472,10 +1472,10 @@
struct s3c24xx_uart_port *ourport = to_ourport(port);
struct clk *clk = ERR_PTR(-EINVAL);
unsigned long flags;
- unsigned int baud, quot, clk_sel = 0;
- unsigned int ulcon;
- unsigned int umcon;
+ unsigned int baud, quot;
unsigned int udivslot = 0;
+ u32 ulcon, umcon;
+ u8 clk_sel = 0;
/*
* We don't support modem control lines.
@@ -1737,12 +1737,12 @@
static struct s3c24xx_uart_port s3c24xx_serial_ports[UART_NR];
-static void s3c24xx_serial_init_port_default(int index) {
+static void s3c24xx_serial_init_port_default(int index)
+{
struct uart_port *port = &s3c24xx_serial_ports[index].port;
spin_lock_init(&port->lock);
- port->iotype = UPIO_MEM;
port->uartclk = 0;
port->fifosize = 16;
port->flags = UPF_BOOT_AUTOCONF;
@@ -1758,7 +1758,7 @@
const struct s3c2410_uartcfg *cfg)
{
const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
+ u32 ucon = rd_regl(port, S3C2410_UCON);
ucon &= (info->clksel_mask | info->ucon_mask);
wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
@@ -1776,10 +1776,9 @@
struct device *dev = ourport->port.dev;
const struct s3c24xx_uart_info *info = ourport->info;
char clk_name[MAX_CLK_NAME_LENGTH];
- unsigned int clk_sel;
struct clk *clk;
- int clk_num;
int ret;
+ u8 clk_sel, clk_num;
clk_sel = ourport->cfg->clk_sel ? : info->def_clk_sel;
for (clk_num = 0; clk_num < info->num_clks; clk_num++) {
@@ -1904,7 +1903,7 @@
wr_regl(port, S3C64XX_UINTSP, 0xf);
break;
case TYPE_APPLE_S5L: {
- unsigned int ucon;
+ u32 ucon;
ucon = rd_regl(port, S3C2410_UCON);
ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK |
@@ -1952,7 +1951,7 @@
struct device_node *np = pdev->dev.of_node;
struct s3c24xx_uart_port *ourport;
int index = probe_index;
- int ret, prop = 0;
+ int ret, prop = 0, fifosize_prop = 1;
if (np) {
ret = of_alias_get_id(np, "serial");
@@ -1989,9 +1988,11 @@
break;
}
+ ourport->port.iotype = ourport->info->iotype;
+
if (np) {
- of_property_read_u32(np,
- "samsung,uart-fifosize", &ourport->port.fifosize);
+ fifosize_prop = of_property_read_u32(np, "samsung,uart-fifosize",
+ &ourport->port.fifosize);
if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
switch (prop) {
@@ -2009,10 +2010,13 @@
}
}
- if (ourport->drv_data->fifosize[index])
- ourport->port.fifosize = ourport->drv_data->fifosize[index];
- else if (ourport->info->fifosize)
- ourport->port.fifosize = ourport->info->fifosize;
+ if (fifosize_prop) {
+ if (ourport->drv_data->fifosize[index])
+ ourport->port.fifosize = ourport->drv_data->fifosize[index];
+ else if (ourport->info->fifosize)
+ ourport->port.fifosize = ourport->info->fifosize;
+ }
+
ourport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SAMSUNG_CONSOLE);
/*
@@ -2058,9 +2062,8 @@
{
struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
- if (port) {
+ if (port)
uart_remove_one_port(&s3c24xx_uart_drv, port);
- }
uart_unregister_driver(&s3c24xx_uart_drv);
}
@@ -2106,7 +2109,7 @@
/* restore IRQ mask */
switch (ourport->info->type) {
case TYPE_S3C6400: {
- unsigned int uintm = 0xf;
+ u32 uintm = 0xf;
if (ourport->tx_enabled)
uintm &= ~S3C64XX_UINTM_TXD_MSK;
@@ -2122,7 +2125,7 @@
break;
}
case TYPE_APPLE_S5L: {
- unsigned int ucon;
+ u32 ucon;
int ret;
ret = clk_prepare_enable(ourport->clk);
@@ -2183,27 +2186,27 @@
static struct uart_port *cons_uart;
-static int
-s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
+static bool
+s3c24xx_serial_console_txrdy(struct uart_port *port, u32 ufcon)
{
const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
- unsigned long ufstat, utrstat;
+ u32 ufstat, utrstat;
if (ufcon & S3C2410_UFCON_FIFOMODE) {
/* fifo mode - check amount of data in fifo registers... */
ufstat = rd_regl(port, S3C2410_UFSTAT);
- return (ufstat & info->tx_fifofull) ? 0 : 1;
+ return !(ufstat & info->tx_fifofull);
}
/* in non-fifo mode, we go and use the tx buffer empty */
utrstat = rd_regl(port, S3C2410_UTRSTAT);
- return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
+ return utrstat & S3C2410_UTRSTAT_TXE;
}
static bool
-s3c24xx_port_configured(unsigned int ucon)
+s3c24xx_port_configured(u32 ucon)
{
/* consider the serial port configured if the tx/rx mode set */
return (ucon & 0xf) != 0;
@@ -2218,7 +2221,7 @@
static int s3c24xx_serial_get_poll_char(struct uart_port *port)
{
const struct s3c24xx_uart_port *ourport = to_ourport(port);
- unsigned int ufstat;
+ u32 ufstat;
ufstat = rd_regl(port, S3C2410_UFSTAT);
if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
@@ -2230,8 +2233,8 @@
static void s3c24xx_serial_put_poll_char(struct uart_port *port,
unsigned char c)
{
- unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
- unsigned int ucon = rd_regl(port, S3C2410_UCON);
+ u32 ufcon = rd_regl(port, S3C2410_UFCON);
+ u32 ucon = rd_regl(port, S3C2410_UCON);
/* not possible to xmit on unconfigured port */
if (!s3c24xx_port_configured(ucon))
@@ -2247,7 +2250,7 @@
static void
s3c24xx_serial_console_putchar(struct uart_port *port, unsigned char ch)
{
- unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
+ u32 ufcon = rd_regl(port, S3C2410_UFCON);
while (!s3c24xx_serial_console_txrdy(port, ufcon))
cpu_relax();
@@ -2258,7 +2261,7 @@
s3c24xx_serial_console_write(struct console *co, const char *s,
unsigned int count)
{
- unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
+ u32 ucon = rd_regl(cons_uart, S3C2410_UCON);
unsigned long flags;
bool locked = true;
@@ -2285,12 +2288,10 @@
int *parity, int *bits)
{
struct clk *clk;
- unsigned int ulcon;
- unsigned int ucon;
- unsigned int ubrdiv;
unsigned long rate;
- unsigned int clk_sel;
+ u32 ulcon, ucon, ubrdiv;
char clk_name[MAX_CLK_NAME_LENGTH];
+ u8 clk_sel;
ulcon = rd_regl(port, S3C2410_ULCON);
ucon = rd_regl(port, S3C2410_UCON);
@@ -2399,8 +2400,9 @@
.name = "Samsung S3C6400 UART",
.type = TYPE_S3C6400,
.port_type = PORT_S3C6400,
+ .iotype = UPIO_MEM,
.fifosize = 64,
- .has_divslot = 1,
+ .has_divslot = true,
.rx_fifomask = S3C2440_UFSTAT_RXMASK,
.rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
.rx_fifofull = S3C2440_UFSTAT_RXFULL,
@@ -2428,7 +2430,8 @@
.name = "Samsung S5PV210 UART",
.type = TYPE_S3C6400,
.port_type = PORT_S3C6400,
- .has_divslot = 1,
+ .iotype = UPIO_MEM,
+ .has_divslot = true,
.rx_fifomask = S5PV210_UFSTAT_RXMASK,
.rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
.rx_fifofull = S5PV210_UFSTAT_RXFULL,
@@ -2452,12 +2455,13 @@
#endif
#if defined(CONFIG_ARCH_EXYNOS)
-#define EXYNOS_COMMON_SERIAL_DRV_DATA() \
+#define EXYNOS_COMMON_SERIAL_DRV_DATA \
.info = { \
.name = "Samsung Exynos UART", \
.type = TYPE_S3C6400, \
.port_type = PORT_S3C6400, \
- .has_divslot = 1, \
+ .iotype = UPIO_MEM, \
+ .has_divslot = true, \
.rx_fifomask = S5PV210_UFSTAT_RXMASK, \
.rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \
.rx_fifofull = S5PV210_UFSTAT_RXFULL, \
@@ -2476,39 +2480,57 @@
} \
static const struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
- EXYNOS_COMMON_SERIAL_DRV_DATA(),
+ EXYNOS_COMMON_SERIAL_DRV_DATA,
.fifosize = { 256, 64, 16, 16 },
};
static const struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
- EXYNOS_COMMON_SERIAL_DRV_DATA(),
+ EXYNOS_COMMON_SERIAL_DRV_DATA,
.fifosize = { 64, 256, 16, 256 },
};
static const struct s3c24xx_serial_drv_data exynos850_serial_drv_data = {
- EXYNOS_COMMON_SERIAL_DRV_DATA(),
+ EXYNOS_COMMON_SERIAL_DRV_DATA,
.fifosize = { 256, 64, 64, 64 },
};
-/*
- * Common drv_data struct for platforms that specify samsung,uart-fifosize in
- * device tree.
- */
-static const struct s3c24xx_serial_drv_data exynos_fifoszdt_serial_drv_data = {
- EXYNOS_COMMON_SERIAL_DRV_DATA(),
+static const struct s3c24xx_serial_drv_data gs101_serial_drv_data = {
+ .info = {
+ .name = "Google GS101 UART",
+ .type = TYPE_S3C6400,
+ .port_type = PORT_S3C6400,
+ .iotype = UPIO_MEM32,
+ .has_divslot = true,
+ .rx_fifomask = S5PV210_UFSTAT_RXMASK,
+ .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
+ .rx_fifofull = S5PV210_UFSTAT_RXFULL,
+ .tx_fifofull = S5PV210_UFSTAT_TXFULL,
+ .tx_fifomask = S5PV210_UFSTAT_TXMASK,
+ .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL0,
+ .num_clks = 1,
+ .clksel_mask = 0,
+ .clksel_shift = 0,
+ },
+ .def_cfg = {
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ .has_fracval = 1,
+ },
+ /* samsung,uart-fifosize must be specified in the device tree. */
.fifosize = { 0 },
};
#define EXYNOS4210_SERIAL_DRV_DATA (&exynos4210_serial_drv_data)
#define EXYNOS5433_SERIAL_DRV_DATA (&exynos5433_serial_drv_data)
#define EXYNOS850_SERIAL_DRV_DATA (&exynos850_serial_drv_data)
-#define EXYNOS_FIFOSZDT_DRV_DATA (&exynos_fifoszdt_serial_drv_data)
+#define GS101_SERIAL_DRV_DATA (&gs101_serial_drv_data)
#else
#define EXYNOS4210_SERIAL_DRV_DATA NULL
#define EXYNOS5433_SERIAL_DRV_DATA NULL
#define EXYNOS850_SERIAL_DRV_DATA NULL
-#define EXYNOS_FIFOSZDT_DRV_DATA NULL
+#define GS101_SERIAL_DRV_DATA NULL
#endif
#ifdef CONFIG_ARCH_APPLE
@@ -2517,6 +2539,7 @@
.name = "Apple S5L UART",
.type = TYPE_APPLE_S5L,
.port_type = PORT_8250,
+ .iotype = UPIO_MEM,
.fifosize = 16,
.rx_fifomask = S3C2410_UFSTAT_RXMASK,
.rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
@@ -2546,8 +2569,9 @@
.name = "Axis ARTPEC-8 UART",
.type = TYPE_S3C6400,
.port_type = PORT_S3C6400,
+ .iotype = UPIO_MEM,
.fifosize = 64,
- .has_divslot = 1,
+ .has_divslot = true,
.rx_fifomask = S5PV210_UFSTAT_RXMASK,
.rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
.rx_fifofull = S5PV210_UFSTAT_RXFULL,
@@ -2594,7 +2618,7 @@
.driver_data = (kernel_ulong_t)ARTPEC8_SERIAL_DRV_DATA,
}, {
.name = "gs101-uart",
- .driver_data = (kernel_ulong_t)EXYNOS_FIFOSZDT_DRV_DATA,
+ .driver_data = (kernel_ulong_t)GS101_SERIAL_DRV_DATA,
},
{ },
};
@@ -2617,7 +2641,7 @@
{ .compatible = "axis,artpec8-uart",
.data = ARTPEC8_SERIAL_DRV_DATA },
{ .compatible = "google,gs101-uart",
- .data = EXYNOS_FIFOSZDT_DRV_DATA },
+ .data = GS101_SERIAL_DRV_DATA },
{},
};
MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
@@ -2716,7 +2740,8 @@
{
struct earlycon_device *dev = con->data;
const struct samsung_early_console_data *data = dev->port.private_data;
- int ch, ufstat, num_read = 0;
+ int num_read = 0;
+ u32 ch, ufstat;
while (num_read < n) {
ufstat = rd_regl(&dev->port, S3C2410_UFSTAT);
@@ -2785,6 +2810,17 @@
OF_EARLYCON_DECLARE(artpec8, "axis,artpec8-uart",
s5pv210_early_console_setup);
+static int __init gs101_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ /* gs101 always expects MMIO32 register accesses. */
+ device->port.iotype = UPIO_MEM32;
+
+ return s5pv210_early_console_setup(device, opt);
+}
+
+OF_EARLYCON_DECLARE(gs101, "google,gs101-uart", gs101_early_console_setup);
+
/* Apple S5L */
static int __init apple_s5l_early_console_setup(struct earlycon_device *device,
const char *opt)
diff --git a/drivers/tty/serial/serial_base_bus.c b/drivers/tty/serial/serial_base_bus.c
index 3dfcf20..4df2a4b 100644
--- a/drivers/tty/serial/serial_base_bus.c
+++ b/drivers/tty/serial/serial_base_bus.c
@@ -41,7 +41,7 @@
return 0;
}
-static struct bus_type serial_base_bus_type = {
+static const struct bus_type serial_base_bus_type = {
.name = "serial-base",
.match = serial_base_match,
};
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index d6a58a9..ff85ebd 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2608,7 +2608,12 @@
port->type = PORT_UNKNOWN;
flags |= UART_CONFIG_TYPE;
}
+ /* Synchronize with possible boot console. */
+ if (uart_console(port))
+ console_lock();
port->ops->config_port(port, flags);
+ if (uart_console(port))
+ console_unlock();
}
if (port->type != PORT_UNKNOWN) {
@@ -2616,6 +2621,10 @@
uart_report_port(drv, port);
+ /* Synchronize with possible boot console. */
+ if (uart_console(port))
+ console_lock();
+
/* Power up port for set_mctrl() */
uart_change_pm(state, UART_PM_STATE_ON);
@@ -2632,6 +2641,9 @@
uart_rs485_config(port);
+ if (uart_console(port))
+ console_unlock();
+
/*
* If this driver supports console, and it hasn't been
* successfully registered yet, try to re-register it.
diff --git a/drivers/tty/serial/serial_port.c b/drivers/tty/serial/serial_port.c
index 72b6f4f..22b9eeb 100644
--- a/drivers/tty/serial/serial_port.c
+++ b/drivers/tty/serial/serial_port.c
@@ -8,7 +8,10 @@
#include <linux/device.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/property.h>
#include <linux/serial_core.h>
#include <linux/spinlock.h>
@@ -105,6 +108,148 @@
}
EXPORT_SYMBOL(uart_remove_one_port);
+/**
+ * __uart_read_properties - read firmware properties of the given UART port
+ * @port: corresponding port
+ * @use_defaults: apply defaults (when %true) or validate the values (when %false)
+ *
+ * The following device properties are supported:
+ * - clock-frequency (optional)
+ * - fifo-size (optional)
+ * - no-loopback-test (optional)
+ * - reg-shift (defaults may apply)
+ * - reg-offset (value may be validated)
+ * - reg-io-width (defaults may apply or value may be validated)
+ * - interrupts (OF only)
+ * - serial [alias ID] (OF only)
+ *
+ * If the port->dev is of struct platform_device type the interrupt line
+ * will be retrieved via platform_get_irq() call against that device.
+ * Otherwise it will be assigned by fwnode_irq_get() call. In both cases
+ * the index 0 of the resource is used.
+ *
+ * The caller is responsible to initialize the following fields of the @port
+ * ->dev (must be valid)
+ * ->flags
+ * ->mapbase
+ * ->mapsize
+ * ->regshift (if @use_defaults is false)
+ * before calling this function. Alternatively the above mentioned fields
+ * may be zeroed, in such case the only ones, that have associated properties
+ * found, will be set to the respective values.
+ *
+ * If no error happened, the ->irq, ->mapbase, ->mapsize will be altered.
+ * The ->iotype is always altered.
+ *
+ * When @use_defaults is true and the respective property is not found
+ * the following values will be applied:
+ * ->regshift = 0
+ * In this case IRQ must be provided, otherwise an error will be returned.
+ *
+ * When @use_defaults is false and the respective property is found
+ * the following values will be validated:
+ * - reg-io-width (->iotype)
+ * - reg-offset (->mapsize against ->mapbase)
+ *
+ * Returns: 0 on success or negative errno on failure
+ */
+static int __uart_read_properties(struct uart_port *port, bool use_defaults)
+{
+ struct device *dev = port->dev;
+ u32 value;
+ int ret;
+
+ /* Read optional UART functional clock frequency */
+ device_property_read_u32(dev, "clock-frequency", &port->uartclk);
+
+ /* Read the registers alignment (default: 8-bit) */
+ ret = device_property_read_u32(dev, "reg-shift", &value);
+ if (ret)
+ port->regshift = use_defaults ? 0 : port->regshift;
+ else
+ port->regshift = value;
+
+ /* Read the registers I/O access type (default: MMIO 8-bit) */
+ ret = device_property_read_u32(dev, "reg-io-width", &value);
+ if (ret) {
+ port->iotype = UPIO_MEM;
+ } else {
+ switch (value) {
+ case 1:
+ port->iotype = UPIO_MEM;
+ break;
+ case 2:
+ port->iotype = UPIO_MEM16;
+ break;
+ case 4:
+ port->iotype = device_is_big_endian(dev) ? UPIO_MEM32BE : UPIO_MEM32;
+ break;
+ default:
+ if (!use_defaults) {
+ dev_err(dev, "Unsupported reg-io-width (%u)\n", value);
+ return -EINVAL;
+ }
+ port->iotype = UPIO_UNKNOWN;
+ break;
+ }
+ }
+
+ /* Read the address mapping base offset (default: no offset) */
+ ret = device_property_read_u32(dev, "reg-offset", &value);
+ if (ret)
+ value = 0;
+
+ /* Check for shifted address mapping overflow */
+ if (!use_defaults && port->mapsize < value) {
+ dev_err(dev, "reg-offset %u exceeds region size %pa\n", value, &port->mapsize);
+ return -EINVAL;
+ }
+
+ port->mapbase += value;
+ port->mapsize -= value;
+
+ /* Read optional FIFO size */
+ device_property_read_u32(dev, "fifo-size", &port->fifosize);
+
+ if (device_property_read_bool(dev, "no-loopback-test"))
+ port->flags |= UPF_SKIP_TEST;
+
+ /* Get index of serial line, if found in DT aliases */
+ ret = of_alias_get_id(dev_of_node(dev), "serial");
+ if (ret >= 0)
+ port->line = ret;
+
+ if (dev_is_platform(dev))
+ ret = platform_get_irq(to_platform_device(dev), 0);
+ else
+ ret = fwnode_irq_get(dev_fwnode(dev), 0);
+ if (ret == -EPROBE_DEFER)
+ return ret;
+ if (ret > 0)
+ port->irq = ret;
+ else if (use_defaults)
+ /* By default IRQ support is mandatory */
+ return ret;
+ else
+ port->irq = 0;
+
+ port->flags |= UPF_SHARE_IRQ;
+
+ return 0;
+}
+
+int uart_read_port_properties(struct uart_port *port)
+{
+ return __uart_read_properties(port, true);
+}
+EXPORT_SYMBOL_GPL(uart_read_port_properties);
+
+int uart_read_and_validate_port_properties(struct uart_port *port)
+{
+ return __uart_read_properties(port, false);
+}
+EXPORT_SYMBOL_GPL(uart_read_and_validate_port_properties);
+
static struct device_driver serial_port_driver = {
.name = "port",
.suppress_bind_attrs = true,
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index e189789..abba397 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -23,9 +23,10 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
-
#include <linux/io.h>
+#include <asm/txx9/generic.h>
+
#define PASS_LIMIT 256
#if !defined(CONFIG_SERIAL_TXX9_STDSERIAL)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index a85e7b9..e512eaa 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -576,13 +576,13 @@
#ifdef CONFIG_SERIAL_SH_SCI_DMA
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- u16 new, scr = serial_port_in(port, SCSCR);
+ u16 new, scr = sci_serial_in(port, SCSCR);
if (s->chan_tx)
new = scr | SCSCR_TDRQE;
else
new = scr & ~SCSCR_TDRQE;
if (new != scr)
- serial_port_out(port, SCSCR, new);
+ sci_serial_out(port, SCSCR, new);
}
if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
@@ -599,7 +599,7 @@
if (!s->chan_tx || s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE ||
port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
/* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
- ctrl = serial_port_in(port, SCSCR);
+ ctrl = sci_serial_in(port, SCSCR);
/*
* For SCI, TE (transmit enable) must be set after setting TIE
@@ -609,7 +609,7 @@
if (port->type == PORT_SCI)
ctrl |= SCSCR_TE;
- serial_port_out(port, SCSCR, ctrl | SCSCR_TIE);
+ sci_serial_out(port, SCSCR, ctrl | SCSCR_TIE);
}
}
@@ -618,14 +618,14 @@
unsigned short ctrl;
/* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
- ctrl = serial_port_in(port, SCSCR);
+ ctrl = sci_serial_in(port, SCSCR);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~SCSCR_TDRQE;
ctrl &= ~SCSCR_TIE;
- serial_port_out(port, SCSCR, ctrl);
+ sci_serial_out(port, SCSCR, ctrl);
#ifdef CONFIG_SERIAL_SH_SCI_DMA
if (to_sci_port(port)->chan_tx &&
@@ -640,41 +640,40 @@
{
unsigned short ctrl;
- ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port);
+ ctrl = sci_serial_in(port, SCSCR) | port_rx_irq_mask(port);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~SCSCR_RDRQE;
- serial_port_out(port, SCSCR, ctrl);
+ sci_serial_out(port, SCSCR, ctrl);
}
static void sci_stop_rx(struct uart_port *port)
{
unsigned short ctrl;
- ctrl = serial_port_in(port, SCSCR);
+ ctrl = sci_serial_in(port, SCSCR);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
ctrl &= ~SCSCR_RDRQE;
ctrl &= ~port_rx_irq_mask(port);
- serial_port_out(port, SCSCR, ctrl);
+ sci_serial_out(port, SCSCR, ctrl);
}
static void sci_clear_SCxSR(struct uart_port *port, unsigned int mask)
{
if (port->type == PORT_SCI) {
/* Just store the mask */
- serial_port_out(port, SCxSR, mask);
+ sci_serial_out(port, SCxSR, mask);
} else if (to_sci_port(port)->params->overrun_mask == SCIFA_ORER) {
/* SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 */
/* Only clear the status bits we want to clear */
- serial_port_out(port, SCxSR,
- serial_port_in(port, SCxSR) & mask);
+ sci_serial_out(port, SCxSR, sci_serial_in(port, SCxSR) & mask);
} else {
/* Store the mask, clear parity/framing errors */
- serial_port_out(port, SCxSR, mask & ~(SCIF_FERC | SCIF_PERC));
+ sci_serial_out(port, SCxSR, mask & ~(SCIF_FERC | SCIF_PERC));
}
}
@@ -688,7 +687,7 @@
int c;
do {
- status = serial_port_in(port, SCxSR);
+ status = sci_serial_in(port, SCxSR);
if (status & SCxSR_ERRORS(port)) {
sci_clear_SCxSR(port, SCxSR_ERROR_CLEAR(port));
continue;
@@ -699,10 +698,10 @@
if (!(status & SCxSR_RDxF(port)))
return NO_POLL_CHAR;
- c = serial_port_in(port, SCxRDR);
+ c = sci_serial_in(port, SCxRDR);
/* Dummy read */
- serial_port_in(port, SCxSR);
+ sci_serial_in(port, SCxSR);
sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
return c;
@@ -714,10 +713,10 @@
unsigned short status;
do {
- status = serial_port_in(port, SCxSR);
+ status = sci_serial_in(port, SCxSR);
} while (!(status & SCxSR_TDxE(port)));
- serial_port_out(port, SCxTDR, c);
+ sci_serial_out(port, SCxTDR, c);
sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
}
#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE ||
@@ -736,8 +735,8 @@
}
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- u16 data = serial_port_in(port, SCPDR);
- u16 ctrl = serial_port_in(port, SCPCR);
+ u16 data = sci_serial_in(port, SCPDR);
+ u16 ctrl = sci_serial_in(port, SCPCR);
/* Enable RXD and TXD pin functions */
ctrl &= ~(SCPCR_RXDC | SCPCR_TXDC);
@@ -756,10 +755,10 @@
/* Enable CTS# pin function */
ctrl &= ~SCPCR_CTSC;
}
- serial_port_out(port, SCPDR, data);
- serial_port_out(port, SCPCR, ctrl);
+ sci_serial_out(port, SCPDR, data);
+ sci_serial_out(port, SCPCR, ctrl);
} else if (sci_getreg(port, SCSPTR)->size) {
- u16 status = serial_port_in(port, SCSPTR);
+ u16 status = sci_serial_in(port, SCSPTR);
/* RTS# is always output; and active low, unless autorts */
status |= SCSPTR_RTSIO;
@@ -769,7 +768,7 @@
status &= ~SCSPTR_RTSDT;
/* CTS# and SCK are inputs */
status &= ~(SCSPTR_CTSIO | SCSPTR_SCKIO);
- serial_port_out(port, SCSPTR, status);
+ sci_serial_out(port, SCSPTR, status);
}
}
@@ -781,13 +780,13 @@
reg = sci_getreg(port, SCTFDR);
if (reg->size)
- return serial_port_in(port, SCTFDR) & fifo_mask;
+ return sci_serial_in(port, SCTFDR) & fifo_mask;
reg = sci_getreg(port, SCFDR);
if (reg->size)
- return serial_port_in(port, SCFDR) >> 8;
+ return sci_serial_in(port, SCFDR) >> 8;
- return !(serial_port_in(port, SCxSR) & SCI_TDRE);
+ return !(sci_serial_in(port, SCxSR) & SCI_TDRE);
}
static int sci_txroom(struct uart_port *port)
@@ -803,13 +802,13 @@
reg = sci_getreg(port, SCRFDR);
if (reg->size)
- return serial_port_in(port, SCRFDR) & fifo_mask;
+ return sci_serial_in(port, SCRFDR) & fifo_mask;
reg = sci_getreg(port, SCFDR);
if (reg->size)
- return serial_port_in(port, SCFDR) & fifo_mask;
+ return sci_serial_in(port, SCFDR) & fifo_mask;
- return (serial_port_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
+ return (sci_serial_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
}
/* ********************************************************************** *
@@ -824,14 +823,14 @@
unsigned short ctrl;
int count;
- status = serial_port_in(port, SCxSR);
+ status = sci_serial_in(port, SCxSR);
if (!(status & SCxSR_TDxE(port))) {
- ctrl = serial_port_in(port, SCSCR);
+ ctrl = sci_serial_in(port, SCSCR);
if (uart_circ_empty(xmit))
ctrl &= ~SCSCR_TIE;
else
ctrl |= SCSCR_TIE;
- serial_port_out(port, SCSCR, ctrl);
+ sci_serial_out(port, SCSCR, ctrl);
return;
}
@@ -847,15 +846,15 @@
c = xmit->buf[xmit->tail];
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
} else if (port->type == PORT_SCI && uart_circ_empty(xmit)) {
- ctrl = serial_port_in(port, SCSCR);
+ ctrl = sci_serial_in(port, SCSCR);
ctrl &= ~SCSCR_TE;
- serial_port_out(port, SCSCR, ctrl);
+ sci_serial_out(port, SCSCR, ctrl);
return;
} else {
break;
}
- serial_port_out(port, SCxTDR, c);
+ sci_serial_out(port, SCxTDR, c);
port->icount.tx++;
} while (--count > 0);
@@ -866,10 +865,10 @@
uart_write_wakeup(port);
if (uart_circ_empty(xmit)) {
if (port->type == PORT_SCI) {
- ctrl = serial_port_in(port, SCSCR);
+ ctrl = sci_serial_in(port, SCSCR);
ctrl &= ~SCSCR_TIE;
ctrl |= SCSCR_TEIE;
- serial_port_out(port, SCSCR, ctrl);
+ sci_serial_out(port, SCSCR, ctrl);
}
sci_stop_tx(port);
@@ -883,7 +882,7 @@
unsigned short status;
unsigned char flag;
- status = serial_port_in(port, SCxSR);
+ status = sci_serial_in(port, SCxSR);
if (!(status & SCxSR_RDxF(port)))
return;
@@ -896,7 +895,7 @@
break;
if (port->type == PORT_SCI) {
- char c = serial_port_in(port, SCxRDR);
+ char c = sci_serial_in(port, SCxRDR);
if (uart_handle_sysrq_char(port, c))
count = 0;
else
@@ -907,11 +906,11 @@
if (port->type == PORT_SCIF ||
port->type == PORT_HSCIF) {
- status = serial_port_in(port, SCxSR);
- c = serial_port_in(port, SCxRDR);
+ status = sci_serial_in(port, SCxSR);
+ c = sci_serial_in(port, SCxRDR);
} else {
- c = serial_port_in(port, SCxRDR);
- status = serial_port_in(port, SCxSR);
+ c = sci_serial_in(port, SCxRDR);
+ status = sci_serial_in(port, SCxSR);
}
if (uart_handle_sysrq_char(port, c)) {
count--; i--;
@@ -932,7 +931,7 @@
}
}
- serial_port_in(port, SCxSR); /* dummy read */
+ sci_serial_in(port, SCxSR); /* dummy read */
sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
copied += count;
@@ -944,8 +943,8 @@
tty_flip_buffer_push(tport);
} else {
/* TTY buffers full; read from RX reg to prevent lockup */
- serial_port_in(port, SCxRDR);
- serial_port_in(port, SCxSR); /* dummy read */
+ sci_serial_in(port, SCxRDR);
+ sci_serial_in(port, SCxSR); /* dummy read */
sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
}
}
@@ -953,7 +952,7 @@
static int sci_handle_errors(struct uart_port *port)
{
int copied = 0;
- unsigned short status = serial_port_in(port, SCxSR);
+ unsigned short status = sci_serial_in(port, SCxSR);
struct tty_port *tport = &port->state->port;
struct sci_port *s = to_sci_port(port);
@@ -1000,10 +999,10 @@
if (!reg->size)
return 0;
- status = serial_port_in(port, s->params->overrun_reg);
+ status = sci_serial_in(port, s->params->overrun_reg);
if (status & s->params->overrun_mask) {
status &= ~s->params->overrun_mask;
- serial_port_out(port, s->params->overrun_reg, status);
+ sci_serial_out(port, s->params->overrun_reg, status);
port->icount.overrun++;
@@ -1018,7 +1017,7 @@
static int sci_handle_breaks(struct uart_port *port)
{
int copied = 0;
- unsigned short status = serial_port_in(port, SCxSR);
+ unsigned short status = sci_serial_in(port, SCxSR);
struct tty_port *tport = &port->state->port;
if (uart_handle_break(port))
@@ -1051,7 +1050,7 @@
/* HSCIF can be set to an arbitrary level. */
if (sci_getreg(port, HSRTRGR)->size) {
- serial_port_out(port, HSRTRGR, rx_trig);
+ sci_serial_out(port, HSRTRGR, rx_trig);
return rx_trig;
}
@@ -1092,9 +1091,9 @@
return 1;
}
- serial_port_out(port, SCFCR,
- (serial_port_in(port, SCFCR) &
- ~(SCFCR_RTRG1 | SCFCR_RTRG0)) | bits);
+ sci_serial_out(port, SCFCR,
+ (sci_serial_in(port, SCFCR) &
+ ~(SCFCR_RTRG1 | SCFCR_RTRG0)) | bits);
return rx_trig;
}
@@ -1102,9 +1101,9 @@
static int scif_rtrg_enabled(struct uart_port *port)
{
if (sci_getreg(port, HSRTRGR)->size)
- return serial_port_in(port, HSRTRGR) != 0;
+ return sci_serial_in(port, HSRTRGR) != 0;
else
- return (serial_port_in(port, SCFCR) &
+ return (sci_serial_in(port, SCFCR) &
(SCFCR_RTRG0 | SCFCR_RTRG1)) != 0;
}
@@ -1219,8 +1218,8 @@
s->cookie_tx = -EINVAL;
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB ||
s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) {
- u16 ctrl = serial_port_in(port, SCSCR);
- serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE);
+ u16 ctrl = sci_serial_in(port, SCSCR);
+ sci_serial_out(port, SCSCR, ctrl & ~SCSCR_TIE);
if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) {
/* Switch irq from DMA to SCIF */
dmaengine_pause(s->chan_tx_saved);
@@ -1296,7 +1295,7 @@
u16 scr;
/* Direct new serial port interrupts back to CPU */
- scr = serial_port_in(port, SCSCR);
+ scr = sci_serial_in(port, SCSCR);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB ||
s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) {
enable_irq(s->irqs[SCIx_RXI_IRQ]);
@@ -1305,7 +1304,7 @@
else
scr &= ~SCSCR_RDRQE;
}
- serial_port_out(port, SCSCR, scr | SCSCR_RIE);
+ sci_serial_out(port, SCSCR, scr | SCSCR_RIE);
}
static void sci_dma_rx_complete(void *arg)
@@ -1714,8 +1713,8 @@
#ifdef CONFIG_SERIAL_SH_SCI_DMA
if (s->chan_rx) {
- u16 scr = serial_port_in(port, SCSCR);
- u16 ssr = serial_port_in(port, SCxSR);
+ u16 scr = sci_serial_in(port, SCSCR);
+ u16 ssr = sci_serial_in(port, SCxSR);
/* Disable future Rx interrupts */
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB ||
@@ -1733,10 +1732,10 @@
scr &= ~SCSCR_RIE;
}
- serial_port_out(port, SCSCR, scr);
+ sci_serial_out(port, SCSCR, scr);
/* Clear current interrupt */
- serial_port_out(port, SCxSR,
- ssr & ~(SCIF_DR | SCxSR_RDxF(port)));
+ sci_serial_out(port, SCxSR,
+ ssr & ~(SCIF_DR | SCxSR_RDxF(port)));
dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u us\n",
jiffies, s->rx_timeout);
start_hrtimer_us(&s->rx_timer, s->rx_timeout);
@@ -1786,9 +1785,9 @@
return sci_tx_interrupt(irq, ptr);
uart_port_lock_irqsave(port, &flags);
- ctrl = serial_port_in(port, SCSCR);
+ ctrl = sci_serial_in(port, SCSCR);
ctrl &= ~(SCSCR_TE | SCSCR_TEIE);
- serial_port_out(port, SCSCR, ctrl);
+ sci_serial_out(port, SCSCR, ctrl);
uart_port_unlock_irqrestore(port, flags);
return IRQ_HANDLED;
@@ -1802,7 +1801,7 @@
sci_handle_breaks(port);
/* drop invalid character received before break was detected */
- serial_port_in(port, SCxRDR);
+ sci_serial_in(port, SCxRDR);
sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port));
@@ -1816,7 +1815,7 @@
if (s->irqs[SCIx_ERI_IRQ] == s->irqs[SCIx_BRI_IRQ]) {
/* Break and Error interrupts are muxed */
- unsigned short ssr_status = serial_port_in(port, SCxSR);
+ unsigned short ssr_status = sci_serial_in(port, SCxSR);
/* Break Interrupt */
if (ssr_status & SCxSR_BRK(port))
@@ -1831,7 +1830,7 @@
if (port->type == PORT_SCI) {
if (sci_handle_errors(port)) {
/* discard character in rx buffer */
- serial_port_in(port, SCxSR);
+ sci_serial_in(port, SCxSR);
sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
}
} else {
@@ -1856,12 +1855,12 @@
struct sci_port *s = to_sci_port(port);
irqreturn_t ret = IRQ_NONE;
- ssr_status = serial_port_in(port, SCxSR);
- scr_status = serial_port_in(port, SCSCR);
+ ssr_status = sci_serial_in(port, SCxSR);
+ scr_status = sci_serial_in(port, SCSCR);
if (s->params->overrun_reg == SCxSR)
orer_status = ssr_status;
else if (sci_getreg(port, s->params->overrun_reg)->size)
- orer_status = serial_port_in(port, s->params->overrun_reg);
+ orer_status = sci_serial_in(port, s->params->overrun_reg);
err_enabled = scr_status & port_rx_irq_mask(port);
@@ -2038,7 +2037,7 @@
static unsigned int sci_tx_empty(struct uart_port *port)
{
- unsigned short status = serial_port_in(port, SCxSR);
+ unsigned short status = sci_serial_in(port, SCxSR);
unsigned short in_tx_fifo = sci_txfill(port);
return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0;
@@ -2047,27 +2046,27 @@
static void sci_set_rts(struct uart_port *port, bool state)
{
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- u16 data = serial_port_in(port, SCPDR);
+ u16 data = sci_serial_in(port, SCPDR);
/* Active low */
if (state)
data &= ~SCPDR_RTSD;
else
data |= SCPDR_RTSD;
- serial_port_out(port, SCPDR, data);
+ sci_serial_out(port, SCPDR, data);
/* RTS# is output */
- serial_port_out(port, SCPCR,
- serial_port_in(port, SCPCR) | SCPCR_RTSC);
+ sci_serial_out(port, SCPCR,
+ sci_serial_in(port, SCPCR) | SCPCR_RTSC);
} else if (sci_getreg(port, SCSPTR)->size) {
- u16 ctrl = serial_port_in(port, SCSPTR);
+ u16 ctrl = sci_serial_in(port, SCSPTR);
/* Active low */
if (state)
ctrl &= ~SCSPTR_RTSDT;
else
ctrl |= SCSPTR_RTSDT;
- serial_port_out(port, SCSPTR, ctrl);
+ sci_serial_out(port, SCSPTR, ctrl);
}
}
@@ -2075,10 +2074,10 @@
{
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
/* Active low */
- return !(serial_port_in(port, SCPDR) & SCPDR_CTSD);
+ return !(sci_serial_in(port, SCPDR) & SCPDR_CTSD);
} else if (sci_getreg(port, SCSPTR)->size) {
/* Active low */
- return !(serial_port_in(port, SCSPTR) & SCSPTR_CTSDT);
+ return !(sci_serial_in(port, SCSPTR) & SCSPTR_CTSDT);
}
return true;
@@ -2108,9 +2107,8 @@
*/
reg = sci_getreg(port, SCFCR);
if (reg->size)
- serial_port_out(port, SCFCR,
- serial_port_in(port, SCFCR) |
- SCFCR_LOOP);
+ sci_serial_out(port, SCFCR,
+ sci_serial_in(port, SCFCR) | SCFCR_LOOP);
}
mctrl_gpio_set(s->gpios, mctrl);
@@ -2120,21 +2118,21 @@
if (!(mctrl & TIOCM_RTS)) {
/* Disable Auto RTS */
- serial_port_out(port, SCFCR,
- serial_port_in(port, SCFCR) & ~SCFCR_MCE);
+ sci_serial_out(port, SCFCR,
+ sci_serial_in(port, SCFCR) & ~SCFCR_MCE);
/* Clear RTS */
sci_set_rts(port, 0);
} else if (s->autorts) {
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
/* Enable RTS# pin function */
- serial_port_out(port, SCPCR,
- serial_port_in(port, SCPCR) & ~SCPCR_RTSC);
+ sci_serial_out(port, SCPCR,
+ sci_serial_in(port, SCPCR) & ~SCPCR_RTSC);
}
/* Enable Auto RTS */
- serial_port_out(port, SCFCR,
- serial_port_in(port, SCFCR) | SCFCR_MCE);
+ sci_serial_out(port, SCFCR,
+ sci_serial_in(port, SCFCR) | SCFCR_MCE);
} else {
/* Set RTS */
sci_set_rts(port, 1);
@@ -2187,8 +2185,8 @@
}
uart_port_lock_irqsave(port, &flags);
- scsptr = serial_port_in(port, SCSPTR);
- scscr = serial_port_in(port, SCSCR);
+ scsptr = sci_serial_in(port, SCSPTR);
+ scscr = sci_serial_in(port, SCSCR);
if (break_state == -1) {
scsptr = (scsptr | SCSPTR_SPB2IO) & ~SCSPTR_SPB2DT;
@@ -2198,8 +2196,8 @@
scscr |= SCSCR_TE;
}
- serial_port_out(port, SCSPTR, scsptr);
- serial_port_out(port, SCSCR, scscr);
+ sci_serial_out(port, SCSPTR, scsptr);
+ sci_serial_out(port, SCSCR, scscr);
uart_port_unlock_irqrestore(port, flags);
}
@@ -2239,9 +2237,9 @@
* Stop RX and TX, disable related interrupts, keep clock source
* and HSCIF TOT bits
*/
- scr = serial_port_in(port, SCSCR);
- serial_port_out(port, SCSCR, scr &
- (SCSCR_CKE1 | SCSCR_CKE0 | s->hscif_tot));
+ scr = sci_serial_in(port, SCSCR);
+ sci_serial_out(port, SCSCR,
+ scr & (SCSCR_CKE1 | SCSCR_CKE0 | s->hscif_tot));
uart_port_unlock_irqrestore(port, flags);
#ifdef CONFIG_SERIAL_SH_SCI_DMA
@@ -2390,19 +2388,19 @@
unsigned int status;
struct sci_port *s = to_sci_port(port);
- serial_port_out(port, SCSCR, s->hscif_tot); /* TE=0, RE=0, CKE1=0 */
+ sci_serial_out(port, SCSCR, s->hscif_tot); /* TE=0, RE=0, CKE1=0 */
reg = sci_getreg(port, SCFCR);
if (reg->size)
- serial_port_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+ sci_serial_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
sci_clear_SCxSR(port,
SCxSR_RDxF_CLEAR(port) & SCxSR_ERROR_CLEAR(port) &
SCxSR_BREAK_CLEAR(port));
if (sci_getreg(port, SCLSR)->size) {
- status = serial_port_in(port, SCLSR);
+ status = sci_serial_in(port, SCLSR);
status &= ~(SCLSR_TO | SCLSR_ORER);
- serial_port_out(port, SCLSR, status);
+ sci_serial_out(port, SCLSR, status);
}
if (s->rx_trigger > 1) {
@@ -2540,8 +2538,8 @@
* It controls the mux to select (H)SCK or frequency divided clock.
*/
if (best_clk >= 0 && sci_getreg(port, SCCKS)->size) {
- serial_port_out(port, SCDL, dl);
- serial_port_out(port, SCCKS, sccks);
+ sci_serial_out(port, SCDL, dl);
+ sci_serial_out(port, SCCKS, sccks);
}
uart_port_lock_irqsave(port, &flags);
@@ -2554,7 +2552,7 @@
bits = tty_get_frame_size(termios->c_cflag);
if (sci_getreg(port, SEMR)->size)
- serial_port_out(port, SEMR, 0);
+ sci_serial_out(port, SEMR, 0);
if (best_clk >= 0) {
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
@@ -2569,9 +2567,9 @@
case 27: smr_val |= SCSMR_SRC_27; break;
}
smr_val |= cks;
- serial_port_out(port, SCSCR, scr_val | s->hscif_tot);
- serial_port_out(port, SCSMR, smr_val);
- serial_port_out(port, SCBRR, brr);
+ sci_serial_out(port, SCSCR, scr_val | s->hscif_tot);
+ sci_serial_out(port, SCSMR, smr_val);
+ sci_serial_out(port, SCBRR, brr);
if (sci_getreg(port, HSSRR)->size) {
unsigned int hssrr = srr | HSCIF_SRE;
/* Calculate deviation from intended rate at the
@@ -2593,7 +2591,7 @@
HSCIF_SRHP_MASK;
hssrr |= HSCIF_SRDE;
}
- serial_port_out(port, HSSRR, hssrr);
+ sci_serial_out(port, HSSRR, hssrr);
}
/* Wait one bit interval */
@@ -2601,10 +2599,10 @@
} else {
/* Don't touch the bit rate configuration */
scr_val = s->cfg->scscr & (SCSCR_CKE1 | SCSCR_CKE0);
- smr_val |= serial_port_in(port, SCSMR) &
+ smr_val |= sci_serial_in(port, SCSMR) &
(SCSMR_CKEDG | SCSMR_SRC_MASK | SCSMR_CKS);
- serial_port_out(port, SCSCR, scr_val | s->hscif_tot);
- serial_port_out(port, SCSMR, smr_val);
+ sci_serial_out(port, SCSCR, scr_val | s->hscif_tot);
+ sci_serial_out(port, SCSMR, smr_val);
}
sci_init_pins(port, termios->c_cflag);
@@ -2613,7 +2611,7 @@
s->autorts = false;
reg = sci_getreg(port, SCFCR);
if (reg->size) {
- unsigned short ctrl = serial_port_in(port, SCFCR);
+ unsigned short ctrl = sci_serial_in(port, SCFCR);
if ((port->flags & UPF_HARD_FLOW) &&
(termios->c_cflag & CRTSCTS)) {
@@ -2630,7 +2628,7 @@
*/
ctrl &= ~(SCFCR_RFRST | SCFCR_TFRST);
- serial_port_out(port, SCFCR, ctrl);
+ sci_serial_out(port, SCFCR, ctrl);
}
if (port->flags & UPF_HARD_FLOW) {
/* Refresh (Auto) RTS */
@@ -2645,7 +2643,7 @@
if (port->type != PORT_SCI)
scr_val |= SCSCR_TE;
scr_val |= SCSCR_RE | (s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0));
- serial_port_out(port, SCSCR, scr_val | s->hscif_tot);
+ sci_serial_out(port, SCSCR, scr_val | s->hscif_tot);
if ((srr + 1 == 5) &&
(port->type == PORT_SCIFA || port->type == PORT_SCIFB)) {
/*
@@ -3017,9 +3015,6 @@
port->irq = sci_port->irqs[SCIx_RXI_IRQ];
port->irqflags = 0;
- port->serial_in = sci_serial_in;
- port->serial_out = sci_serial_out;
-
return 0;
}
@@ -3056,21 +3051,21 @@
uart_port_lock_irqsave(port, &flags);
/* first save SCSCR then disable interrupts, keep clock source */
- ctrl = serial_port_in(port, SCSCR);
+ ctrl = sci_serial_in(port, SCSCR);
ctrl_temp = SCSCR_RE | SCSCR_TE |
(sci_port->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0)) |
(ctrl & (SCSCR_CKE1 | SCSCR_CKE0));
- serial_port_out(port, SCSCR, ctrl_temp | sci_port->hscif_tot);
+ sci_serial_out(port, SCSCR, ctrl_temp | sci_port->hscif_tot);
uart_console_write(port, s, count, serial_console_putchar);
/* wait until fifo is empty and last bit has been transmitted */
bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
- while ((serial_port_in(port, SCxSR) & bits) != bits)
+ while ((sci_serial_in(port, SCxSR) & bits) != bits)
cpu_relax();
/* restore the SCSCR */
- serial_port_out(port, SCSCR, ctrl);
+ sci_serial_out(port, SCSCR, ctrl);
if (locked)
uart_port_unlock_irqrestore(port, flags);
@@ -3503,8 +3498,6 @@
if (!device->port.membase)
return -ENODEV;
- device->port.serial_in = sci_serial_in;
- device->port.serial_out = sci_serial_out;
device->port.type = type;
memcpy(&sci_ports[0].port, &device->port, sizeof(struct uart_port));
port_cfg.type = type;
diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
index a4cc569a..0670fd9 100644
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -412,7 +412,8 @@
break;
ssp->port.icount.rx++;
- uart_insert_char(&ssp->port, 0, 0, ch, TTY_NORMAL);
+ if (!uart_prepare_sysrq_char(&ssp->port, ch))
+ uart_insert_char(&ssp->port, 0, 0, ch, TTY_NORMAL);
}
tty_flip_buffer_push(&ssp->port.state->port);
@@ -534,7 +535,7 @@
if (ip & SIFIVE_SERIAL_IP_TXWM_MASK)
__ssp_transmit_chars(ssp);
- uart_port_unlock(&ssp->port);
+ uart_unlock_and_check_sysrq(&ssp->port);
return IRQ_HANDLED;
}
@@ -791,13 +792,10 @@
if (!ssp)
return;
- local_irq_save(flags);
- if (ssp->port.sysrq)
- locked = 0;
- else if (oops_in_progress)
- locked = uart_port_trylock(&ssp->port);
+ if (oops_in_progress)
+ locked = uart_port_trylock_irqsave(&ssp->port, &flags);
else
- uart_port_lock(&ssp->port);
+ uart_port_lock_irqsave(&ssp->port, &flags);
ier = __ssp_readl(ssp, SIFIVE_SERIAL_IE_OFFS);
__ssp_writel(0, SIFIVE_SERIAL_IE_OFFS, ssp);
@@ -807,8 +805,7 @@
__ssp_writel(ier, SIFIVE_SERIAL_IE_OFFS, ssp);
if (locked)
- uart_port_unlock(&ssp->port);
- local_irq_restore(flags);
+ uart_port_unlock_irqrestore(&ssp->port, flags);
}
static int sifive_serial_console_setup(struct console *co, char *options)
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index bbb5595..a23e595 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -465,6 +465,7 @@
const struct ktermios *old)
{
struct asc_port *ascport = to_asc_port(port);
+ bool manual_rts, toggle_rts = false;
struct gpio_desc *gpiod;
unsigned int baud;
u32 ctrl_val;
@@ -518,25 +519,13 @@
/* If flow-control selected, stop handling RTS manually */
if (ascport->rts) {
- devm_gpiod_put(port->dev, ascport->rts);
- ascport->rts = NULL;
-
- pinctrl_select_state(ascport->pinctrl,
- ascport->states[DEFAULT]);
+ toggle_rts = true;
+ manual_rts = false;
}
} else {
/* If flow-control disabled, it's safe to handle RTS manually */
- if (!ascport->rts && ascport->states[NO_HW_FLOWCTRL]) {
- pinctrl_select_state(ascport->pinctrl,
- ascport->states[NO_HW_FLOWCTRL]);
-
- gpiod = devm_gpiod_get(port->dev, "rts", GPIOD_OUT_LOW);
- if (!IS_ERR(gpiod)) {
- gpiod_set_consumer_name(gpiod,
- port->dev->of_node->name);
- ascport->rts = gpiod;
- }
- }
+ if (!ascport->rts && ascport->states[NO_HW_FLOWCTRL])
+ manual_rts = toggle_rts = true;
}
if ((baud < 19200) && !ascport->force_m1) {
@@ -595,6 +584,25 @@
asc_out(port, ASC_CTL, (ctrl_val | ASC_CTL_RUN));
uart_port_unlock_irqrestore(port, flags);
+
+ if (toggle_rts) {
+ if (manual_rts) {
+ pinctrl_select_state(ascport->pinctrl,
+ ascport->states[NO_HW_FLOWCTRL]);
+
+ gpiod = devm_gpiod_get(port->dev, "rts", GPIOD_OUT_LOW);
+ if (!IS_ERR(gpiod)) {
+ gpiod_set_consumer_name(gpiod,
+ port->dev->of_node->name);
+ ascport->rts = gpiod;
+ }
+ } else {
+ devm_gpiod_put(port->dev, ascport->rts);
+ ascport->rts = NULL;
+ pinctrl_select_state(ascport->pinctrl,
+ ascport->states[DEFAULT]);
+ }
+ }
}
static const char *asc_type(struct uart_port *port)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 693e932..58d169e 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -9,6 +9,7 @@
* Inspired by st-asc.c from STMicroelectronics (c)
*/
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/console.h>
#include <linux/delay.h>
@@ -39,60 +40,64 @@
/* Register offsets */
static struct stm32_usart_info __maybe_unused stm32f4_info = {
.ofs = {
- .isr = 0x00,
- .rdr = 0x04,
- .tdr = 0x04,
- .brr = 0x08,
- .cr1 = 0x0c,
- .cr2 = 0x10,
- .cr3 = 0x14,
- .gtpr = 0x18,
- .rtor = UNDEF_REG,
- .rqr = UNDEF_REG,
- .icr = UNDEF_REG,
+ .isr = 0x00,
+ .rdr = 0x04,
+ .tdr = 0x04,
+ .brr = 0x08,
+ .cr1 = 0x0c,
+ .cr2 = 0x10,
+ .cr3 = 0x14,
+ .gtpr = 0x18,
+ .rtor = UNDEF_REG,
+ .rqr = UNDEF_REG,
+ .icr = UNDEF_REG,
+ .presc = UNDEF_REG,
+ .hwcfgr1 = UNDEF_REG,
},
.cfg = {
.uart_enable_bit = 13,
.has_7bits_data = false,
- .fifosize = 1,
}
};
static struct stm32_usart_info __maybe_unused stm32f7_info = {
.ofs = {
- .cr1 = 0x00,
- .cr2 = 0x04,
- .cr3 = 0x08,
- .brr = 0x0c,
- .gtpr = 0x10,
- .rtor = 0x14,
- .rqr = 0x18,
- .isr = 0x1c,
- .icr = 0x20,
- .rdr = 0x24,
- .tdr = 0x28,
+ .cr1 = 0x00,
+ .cr2 = 0x04,
+ .cr3 = 0x08,
+ .brr = 0x0c,
+ .gtpr = 0x10,
+ .rtor = 0x14,
+ .rqr = 0x18,
+ .isr = 0x1c,
+ .icr = 0x20,
+ .rdr = 0x24,
+ .tdr = 0x28,
+ .presc = UNDEF_REG,
+ .hwcfgr1 = UNDEF_REG,
},
.cfg = {
.uart_enable_bit = 0,
.has_7bits_data = true,
.has_swap = true,
- .fifosize = 1,
}
};
static struct stm32_usart_info __maybe_unused stm32h7_info = {
.ofs = {
- .cr1 = 0x00,
- .cr2 = 0x04,
- .cr3 = 0x08,
- .brr = 0x0c,
- .gtpr = 0x10,
- .rtor = 0x14,
- .rqr = 0x18,
- .isr = 0x1c,
- .icr = 0x20,
- .rdr = 0x24,
- .tdr = 0x28,
+ .cr1 = 0x00,
+ .cr2 = 0x04,
+ .cr3 = 0x08,
+ .brr = 0x0c,
+ .gtpr = 0x10,
+ .rtor = 0x14,
+ .rqr = 0x18,
+ .isr = 0x1c,
+ .icr = 0x20,
+ .rdr = 0x24,
+ .tdr = 0x28,
+ .presc = 0x2c,
+ .hwcfgr1 = 0x3f0,
},
.cfg = {
.uart_enable_bit = 0,
@@ -100,7 +105,6 @@
.has_swap = true,
.has_wakeup = true,
.has_fifo = true,
- .fifosize = 16,
}
};
@@ -1147,6 +1151,8 @@
free_irq(port->irq, port);
}
+static const unsigned int stm32_usart_presc_val[] = {1, 2, 4, 6, 8, 10, 12, 16, 32, 64, 128, 256};
+
static void stm32_usart_set_termios(struct uart_port *port,
struct ktermios *termios,
const struct ktermios *old)
@@ -1155,17 +1161,19 @@
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
const struct stm32_usart_config *cfg = &stm32_port->info->cfg;
struct serial_rs485 *rs485conf = &port->rs485;
- unsigned int baud, bits;
+ unsigned int baud, bits, uart_clk, uart_clk_pres;
u32 usartdiv, mantissa, fraction, oversampling;
tcflag_t cflag = termios->c_cflag;
- u32 cr1, cr2, cr3, isr;
+ u32 cr1, cr2, cr3, isr, brr, presc;
unsigned long flags;
int ret;
if (!stm32_port->hw_flow_control)
cflag &= ~CRTSCTS;
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 8);
+ uart_clk = clk_get_rate(stm32_port->clk);
+
+ baud = uart_get_baud_rate(port, termios, old, 0, uart_clk / 8);
uart_port_lock_irqsave(port, &flags);
@@ -1267,27 +1275,48 @@
cr3 |= USART_CR3_CTSE | USART_CR3_RTSE;
}
- usartdiv = DIV_ROUND_CLOSEST(port->uartclk, baud);
+ for (presc = 0; presc <= USART_PRESC_MAX; presc++) {
+ uart_clk_pres = DIV_ROUND_CLOSEST(uart_clk, stm32_usart_presc_val[presc]);
+ usartdiv = DIV_ROUND_CLOSEST(uart_clk_pres, baud);
- /*
- * The USART supports 16 or 8 times oversampling.
- * By default we prefer 16 times oversampling, so that the receiver
- * has a better tolerance to clock deviations.
- * 8 times oversampling is only used to achieve higher speeds.
- */
- if (usartdiv < 16) {
- oversampling = 8;
- cr1 |= USART_CR1_OVER8;
- stm32_usart_set_bits(port, ofs->cr1, USART_CR1_OVER8);
- } else {
- oversampling = 16;
- cr1 &= ~USART_CR1_OVER8;
- stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_OVER8);
+ /*
+ * The USART supports 16 or 8 times oversampling.
+ * By default we prefer 16 times oversampling, so that the receiver
+ * has a better tolerance to clock deviations.
+ * 8 times oversampling is only used to achieve higher speeds.
+ */
+ if (usartdiv < 16) {
+ oversampling = 8;
+ cr1 |= USART_CR1_OVER8;
+ stm32_usart_set_bits(port, ofs->cr1, USART_CR1_OVER8);
+ } else {
+ oversampling = 16;
+ cr1 &= ~USART_CR1_OVER8;
+ stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_OVER8);
+ }
+
+ mantissa = (usartdiv / oversampling) << USART_BRR_DIV_M_SHIFT;
+ fraction = usartdiv % oversampling;
+ brr = mantissa | fraction;
+
+ if (FIELD_FIT(USART_BRR_MASK, brr)) {
+ if (ofs->presc != UNDEF_REG) {
+ port->uartclk = uart_clk_pres;
+ writel_relaxed(presc, port->membase + ofs->presc);
+ } else if (presc) {
+ /* We need a prescaler but we don't have it (STM32F4, STM32F7) */
+ dev_err(port->dev,
+ "unable to set baudrate, input clock is too high");
+ }
+ break;
+ } else if (presc == USART_PRESC_MAX) {
+ /* Even with prescaler and brr at max value we can't set baudrate */
+ dev_err(port->dev, "unable to set baudrate, input clock is too high");
+ break;
+ }
}
- mantissa = (usartdiv / oversampling) << USART_BRR_DIV_M_SHIFT;
- fraction = usartdiv % oversampling;
- writel_relaxed(mantissa | fraction, port->membase + ofs->brr);
+ writel_relaxed(brr, port->membase + ofs->brr);
uart_update_timeout(port, cflag, baud);
@@ -1471,37 +1500,57 @@
#endif /* CONFIG_CONSOLE_POLL */
};
-/*
- * STM32H7 RX & TX FIFO threshold configuration (CR3 RXFTCFG / TXFTCFG)
- * Note: 1 isn't a valid value in RXFTCFG / TXFTCFG. In this case,
- * RXNEIE / TXEIE can be used instead of threshold irqs: RXFTIE / TXFTIE.
- * So, RXFTCFG / TXFTCFG bitfields values are encoded as array index + 1.
- */
-static const u32 stm32h7_usart_fifo_thresh_cfg[] = { 1, 2, 4, 8, 12, 14, 16 };
+struct stm32_usart_thresh_ratio {
+ int mul;
+ int div;
+};
-static void stm32_usart_get_ftcfg(struct platform_device *pdev, const char *p,
- int *ftcfg)
+static const struct stm32_usart_thresh_ratio stm32h7_usart_fifo_thresh_cfg[] = {
+ {1, 8}, {1, 4}, {1, 2}, {3, 4}, {7, 8}, {1, 1} };
+
+static int stm32_usart_get_thresh_value(u32 fifo_size, int index)
{
- u32 bytes, i;
+ return fifo_size * stm32h7_usart_fifo_thresh_cfg[index].mul /
+ stm32h7_usart_fifo_thresh_cfg[index].div;
+}
- /* DT option to get RX & TX FIFO threshold (default to 8 bytes) */
+static int stm32_usart_get_ftcfg(struct platform_device *pdev, struct stm32_port *stm32port,
+ const char *p, int *ftcfg)
+{
+ const struct stm32_usart_offsets *ofs = &stm32port->info->ofs;
+ u32 bytes, i, cfg8;
+ int fifo_size;
+
+ if (WARN_ON(ofs->hwcfgr1 == UNDEF_REG))
+ return 1;
+
+ cfg8 = FIELD_GET(USART_HWCFGR1_CFG8,
+ readl_relaxed(stm32port->port.membase + ofs->hwcfgr1));
+
+ /* On STM32H7, hwcfgr is not present, so returned value will be 0 */
+ fifo_size = cfg8 ? 1 << cfg8 : STM32H7_USART_FIFO_SIZE;
+
+ /* DT option to get RX & TX FIFO threshold (default to half fifo size) */
if (of_property_read_u32(pdev->dev.of_node, p, &bytes))
- bytes = 8;
+ bytes = fifo_size / 2;
- for (i = 0; i < ARRAY_SIZE(stm32h7_usart_fifo_thresh_cfg); i++)
- if (stm32h7_usart_fifo_thresh_cfg[i] >= bytes)
+ if (bytes < stm32_usart_get_thresh_value(fifo_size, 0)) {
+ *ftcfg = -EINVAL;
+ return fifo_size;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(stm32h7_usart_fifo_thresh_cfg); i++) {
+ if (stm32_usart_get_thresh_value(fifo_size, i) >= bytes)
break;
+ }
if (i >= ARRAY_SIZE(stm32h7_usart_fifo_thresh_cfg))
i = ARRAY_SIZE(stm32h7_usart_fifo_thresh_cfg) - 1;
- dev_dbg(&pdev->dev, "%s set to %d bytes\n", p,
- stm32h7_usart_fifo_thresh_cfg[i]);
+ dev_dbg(&pdev->dev, "%s set to %d/%d bytes\n", p,
+ stm32_usart_get_thresh_value(fifo_size, i), fifo_size);
- /* Provide FIFO threshold ftcfg (1 is invalid: threshold irq unused) */
- if (i)
- *ftcfg = i - 1;
- else
- *ftcfg = -EINVAL;
+ *ftcfg = i;
+ return fifo_size;
}
static void stm32_usart_deinit_port(struct stm32_port *stm32port)
@@ -1531,7 +1580,6 @@
port->flags = UPF_BOOT_AUTOCONF;
port->ops = &stm32_uart_ops;
port->dev = &pdev->dev;
- port->fifosize = stm32port->info->cfg.fifosize;
port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_STM32_CONSOLE);
port->irq = irq;
port->rs485_config = stm32_usart_config_rs485;
@@ -1547,14 +1595,6 @@
stm32port->swap = stm32port->info->cfg.has_swap &&
of_property_read_bool(pdev->dev.of_node, "rx-tx-swap");
- stm32port->fifoen = stm32port->info->cfg.has_fifo;
- if (stm32port->fifoen) {
- stm32_usart_get_ftcfg(pdev, "rx-threshold",
- &stm32port->rxftcfg);
- stm32_usart_get_ftcfg(pdev, "tx-threshold",
- &stm32port->txftcfg);
- }
-
port->membase = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(port->membase))
return PTR_ERR(port->membase);
@@ -1577,6 +1617,15 @@
goto err_clk;
}
+ stm32port->fifoen = stm32port->info->cfg.has_fifo;
+ if (stm32port->fifoen) {
+ stm32_usart_get_ftcfg(pdev, stm32port, "rx-threshold", &stm32port->rxftcfg);
+ port->fifosize = stm32_usart_get_ftcfg(pdev, stm32port, "tx-threshold",
+ &stm32port->txftcfg);
+ } else {
+ port->fifosize = 1;
+ }
+
stm32port->gpios = mctrl_gpio_init(&stm32port->port, 0);
if (IS_ERR(stm32port->gpios)) {
ret = PTR_ERR(stm32port->gpios);
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index f59f831..af20258 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -9,17 +9,19 @@
#define DRIVER_NAME "stm32-usart"
struct stm32_usart_offsets {
- u8 cr1;
- u8 cr2;
- u8 cr3;
- u8 brr;
- u8 gtpr;
- u8 rtor;
- u8 rqr;
- u8 isr;
- u8 icr;
- u8 rdr;
- u8 tdr;
+ u16 cr1;
+ u16 cr2;
+ u16 cr3;
+ u16 brr;
+ u16 gtpr;
+ u16 rtor;
+ u16 rqr;
+ u16 isr;
+ u16 icr;
+ u16 rdr;
+ u16 tdr;
+ u16 presc;
+ u16 hwcfgr1;
};
struct stm32_usart_config {
@@ -28,7 +30,6 @@
bool has_swap;
bool has_wakeup;
bool has_fifo;
- int fifosize;
};
struct stm32_usart_info {
@@ -36,7 +37,7 @@
struct stm32_usart_config cfg;
};
-#define UNDEF_REG 0xff
+#define UNDEF_REG 0xffff
/* USART_SR (F4) / USART_ISR (F7) */
#define USART_SR_PE BIT(0)
@@ -71,6 +72,7 @@
#define USART_BRR_DIV_M_MASK GENMASK(15, 4)
#define USART_BRR_DIV_M_SHIFT 4
#define USART_BRR_04_R_SHIFT 1
+#define USART_BRR_MASK (USART_BRR_DIV_M_MASK | USART_BRR_DIV_F_MASK)
/* USART_CR1 */
#define USART_CR1_SBK BIT(0)
@@ -176,8 +178,16 @@
#define USART_ICR_CMCF BIT(17) /* F7 */
#define USART_ICR_WUCF BIT(20) /* H7 */
+/* USART_PRESC */
+#define USART_PRESC GENMASK(3, 0) /* H7 */
+#define USART_PRESC_MAX 0b1011
+
+/* USART_HWCFCR1 */
+#define USART_HWCFGR1_CFG8 GENMASK(31, 28) /* MP1 */
+
#define STM32_SERIAL_NAME "ttySTM"
-#define STM32_MAX_PORTS 8
+#define STM32_MAX_PORTS 9
+#define STM32H7_USART_FIFO_SIZE 16
#define RX_BUF_L 4096 /* dma rx buffer length */
#define RX_BUF_P (RX_BUF_L / 2) /* dma rx buffer period */
diff --git a/drivers/tty/serial/sunplus-uart.c b/drivers/tty/serial/sunplus-uart.c
index 99f5285..f5e29eb 100644
--- a/drivers/tty/serial/sunplus-uart.c
+++ b/drivers/tty/serial/sunplus-uart.c
@@ -260,7 +260,7 @@
if (port->ignore_status_mask & SUP_DUMMY_READ)
goto ignore_char;
- if (uart_handle_sysrq_char(port, ch))
+ if (uart_prepare_sysrq_char(port, ch))
goto ignore_char;
uart_insert_char(port, lsr, SUP_UART_LSR_OE, ch, flag);
@@ -287,7 +287,7 @@
if (isc & SUP_UART_ISC_TX)
transmit_chars(port);
- uart_port_unlock(port);
+ uart_unlock_and_check_sysrq(port);
return IRQ_HANDLED;
}
@@ -512,22 +512,16 @@
unsigned long flags;
int locked = 1;
- local_irq_save(flags);
-
- if (sunplus_console_ports[co->index]->port.sysrq)
- locked = 0;
- else if (oops_in_progress)
- locked = uart_port_trylock(&sunplus_console_ports[co->index]->port);
+ if (oops_in_progress)
+ locked = uart_port_trylock_irqsave(&sunplus_console_ports[co->index]->port, &flags);
else
- uart_port_lock(&sunplus_console_ports[co->index]->port);
+ uart_port_lock_irqsave(&sunplus_console_ports[co->index]->port, &flags);
uart_console_write(&sunplus_console_ports[co->index]->port, s, count,
sunplus_uart_console_putchar);
if (locked)
- uart_port_unlock(&sunplus_console_ports[co->index]->port);
-
- local_irq_restore(flags);
+ uart_port_unlock_irqrestore(&sunplus_console_ports[co->index]->port, flags);
}
static int __init sunplus_console_setup(struct console *co, char *options)
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 920762d..5f48ec3 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -22,7 +22,9 @@
#include <linux/of.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
-#include <linux/iopoll.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
#define CDNS_UART_TTY_NAME "ttyPS"
#define CDNS_UART_NAME "xuartps"
@@ -193,6 +195,9 @@
* @clk_rate_change_nb: Notifier block for clock changes
* @quirks: Flags for RXBS support.
* @cts_override: Modem control state override
+ * @gpiod_rts: Pointer to the gpio descriptor
+ * @rs485_tx_started: RS485 tx state
+ * @tx_timer: Timer for tx
*/
struct cdns_uart {
struct uart_port *port;
@@ -203,10 +208,21 @@
struct notifier_block clk_rate_change_nb;
u32 quirks;
bool cts_override;
+ struct gpio_desc *gpiod_rts;
+ bool rs485_tx_started;
+ struct hrtimer tx_timer;
};
struct cdns_platform_data {
u32 quirks;
};
+
+struct serial_rs485 cdns_rs485_supported = {
+ .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND |
+ SER_RS485_RTS_AFTER_SEND,
+ .delay_rts_before_send = 1,
+ .delay_rts_after_send = 1,
+};
+
#define to_cdns_uart(_nb) container_of(_nb, struct cdns_uart, \
clk_rate_change_nb)
@@ -306,17 +322,114 @@
}
/**
- * cdns_uart_handle_tx - Handle the bytes to be Txed.
+ * cdns_rts_gpio_enable - Configure RTS/GPIO to high/low
+ * @cdns_uart: Handle to the cdns_uart
+ * @enable: Value to be set to RTS/GPIO
+ */
+static void cdns_rts_gpio_enable(struct cdns_uart *cdns_uart, bool enable)
+{
+ u32 val;
+
+ if (cdns_uart->gpiod_rts) {
+ gpiod_set_value(cdns_uart->gpiod_rts, enable);
+ } else {
+ val = readl(cdns_uart->port->membase + CDNS_UART_MODEMCR);
+ if (enable)
+ val |= CDNS_UART_MODEMCR_RTS;
+ else
+ val &= ~CDNS_UART_MODEMCR_RTS;
+ writel(val, cdns_uart->port->membase + CDNS_UART_MODEMCR);
+ }
+}
+
+/**
+ * cdns_rs485_tx_setup - Tx setup specific to rs485
+ * @cdns_uart: Handle to the cdns_uart
+ */
+static void cdns_rs485_tx_setup(struct cdns_uart *cdns_uart)
+{
+ bool enable;
+
+ enable = cdns_uart->port->rs485.flags & SER_RS485_RTS_ON_SEND;
+ cdns_rts_gpio_enable(cdns_uart, enable);
+
+ cdns_uart->rs485_tx_started = true;
+}
+
+/**
+ * cdns_rs485_rx_setup - Rx setup specific to rs485
+ * @cdns_uart: Handle to the cdns_uart
+ */
+static void cdns_rs485_rx_setup(struct cdns_uart *cdns_uart)
+{
+ bool enable;
+
+ enable = cdns_uart->port->rs485.flags & SER_RS485_RTS_AFTER_SEND;
+ cdns_rts_gpio_enable(cdns_uart, enable);
+
+ cdns_uart->rs485_tx_started = false;
+}
+
+/**
+ * cdns_uart_tx_empty - Check whether TX is empty
+ * @port: Handle to the uart port structure
+ *
+ * Return: TIOCSER_TEMT on success, 0 otherwise
+ */
+static unsigned int cdns_uart_tx_empty(struct uart_port *port)
+{
+ unsigned int status;
+
+ status = readl(port->membase + CDNS_UART_SR);
+ status &= (CDNS_UART_SR_TXEMPTY | CDNS_UART_SR_TACTIVE);
+ return (status == CDNS_UART_SR_TXEMPTY) ? TIOCSER_TEMT : 0;
+}
+
+/**
+ * cdns_rs485_rx_callback - Timer rx callback handler for rs485.
+ * @t: Handle to the hrtimer structure
+ */
+static enum hrtimer_restart cdns_rs485_rx_callback(struct hrtimer *t)
+{
+ struct cdns_uart *cdns_uart = container_of(t, struct cdns_uart, tx_timer);
+
+ /*
+ * Default Rx should be setup, because Rx signaling path
+ * need to enable to receive data.
+ */
+ cdns_rs485_rx_setup(cdns_uart);
+
+ return HRTIMER_NORESTART;
+}
+
+/**
+ * cdns_calc_after_tx_delay - calculate delay required for after tx.
+ * @cdns_uart: Handle to the cdns_uart
+ */
+static u64 cdns_calc_after_tx_delay(struct cdns_uart *cdns_uart)
+{
+ /*
+ * Frame time + stop bit time + rs485.delay_rts_after_send
+ */
+ return cdns_uart->port->frame_time
+ + DIV_ROUND_UP(cdns_uart->port->frame_time, 7)
+ + (u64)cdns_uart->port->rs485.delay_rts_after_send * NSEC_PER_MSEC;
+}
+
+/**
+ * cdns_uart_handle_tx - Handle the bytes to be transmitted.
* @dev_id: Id of the UART port
* Return: None
*/
static void cdns_uart_handle_tx(void *dev_id)
{
struct uart_port *port = (struct uart_port *)dev_id;
+ struct cdns_uart *cdns_uart = port->private_data;
struct circ_buf *xmit = &port->state->xmit;
unsigned int numbytes;
- if (uart_circ_empty(xmit)) {
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ /* Disable the TX Empty interrupt */
writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IDR);
return;
}
@@ -332,6 +445,16 @@
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
+
+ /* Enable the TX Empty interrupt */
+ writel(CDNS_UART_IXR_TXEMPTY, cdns_uart->port->membase + CDNS_UART_IER);
+
+ if (cdns_uart->port->rs485.flags & SER_RS485_ENABLED &&
+ (uart_circ_empty(xmit) || uart_tx_stopped(port))) {
+ cdns_uart->tx_timer.function = &cdns_rs485_rx_callback;
+ hrtimer_start(&cdns_uart->tx_timer,
+ ns_to_ktime(cdns_calc_after_tx_delay(cdns_uart)), HRTIMER_MODE_REL);
+ }
}
/**
@@ -565,12 +688,28 @@
#endif
/**
+ * cdns_rs485_tx_callback - Timer tx callback handler for rs485.
+ * @t: Handle to the hrtimer structure
+ */
+static enum hrtimer_restart cdns_rs485_tx_callback(struct hrtimer *t)
+{
+ struct cdns_uart *cdns_uart = container_of(t, struct cdns_uart, tx_timer);
+
+ uart_port_lock(cdns_uart->port);
+ cdns_uart_handle_tx(cdns_uart->port);
+ uart_port_unlock(cdns_uart->port);
+
+ return HRTIMER_NORESTART;
+}
+
+/**
* cdns_uart_start_tx - Start transmitting bytes
* @port: Handle to the uart port structure
*/
static void cdns_uart_start_tx(struct uart_port *port)
{
unsigned int status;
+ struct cdns_uart *cdns_uart = port->private_data;
if (uart_tx_stopped(port))
return;
@@ -587,12 +726,19 @@
if (uart_circ_empty(&port->state->xmit))
return;
+ /* Clear the TX Empty interrupt */
writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_ISR);
+ if (cdns_uart->port->rs485.flags & SER_RS485_ENABLED) {
+ if (!cdns_uart->rs485_tx_started) {
+ cdns_uart->tx_timer.function = &cdns_rs485_tx_callback;
+ cdns_rs485_tx_setup(cdns_uart);
+ return hrtimer_start(&cdns_uart->tx_timer,
+ ms_to_ktime(port->rs485.delay_rts_before_send),
+ HRTIMER_MODE_REL);
+ }
+ }
cdns_uart_handle_tx(port);
-
- /* Enable the TX Empty interrupt */
- writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IER);
}
/**
@@ -602,6 +748,10 @@
static void cdns_uart_stop_tx(struct uart_port *port)
{
unsigned int regval;
+ struct cdns_uart *cdns_uart = port->private_data;
+
+ if (cdns_uart->port->rs485.flags & SER_RS485_ENABLED)
+ cdns_rs485_rx_setup(cdns_uart);
regval = readl(port->membase + CDNS_UART_CR);
regval |= CDNS_UART_CR_TX_DIS;
@@ -627,21 +777,6 @@
}
/**
- * cdns_uart_tx_empty - Check whether TX is empty
- * @port: Handle to the uart port structure
- *
- * Return: TIOCSER_TEMT on success, 0 otherwise
- */
-static unsigned int cdns_uart_tx_empty(struct uart_port *port)
-{
- unsigned int status;
-
- status = readl(port->membase + CDNS_UART_SR) &
- (CDNS_UART_SR_TXEMPTY | CDNS_UART_SR_TACTIVE);
- return (status == CDNS_UART_SR_TXEMPTY) ? TIOCSER_TEMT : 0;
-}
-
-/**
* cdns_uart_break_ctl - Based on the input ctl we have to start or stop
* transmitting char breaks
* @port: Handle to the uart port structure
@@ -829,6 +964,9 @@
(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
cpu_relax();
+ if (cdns_uart->port->rs485.flags & SER_RS485_ENABLED)
+ cdns_rs485_rx_setup(cdns_uart);
+
/*
* Clear the RX disable bit and then set the RX enable bit to enable
* the receiver.
@@ -888,6 +1026,10 @@
{
int status;
unsigned long flags;
+ struct cdns_uart *cdns_uart = port->private_data;
+
+ if (cdns_uart->port->rs485.flags & SER_RS485_ENABLED)
+ hrtimer_cancel(&cdns_uart->tx_timer);
uart_port_lock_irqsave(port, &flags);
@@ -1033,6 +1175,8 @@
if (mctrl & TIOCM_RTS)
val |= CDNS_UART_MODEMCR_RTS;
+ if (cdns_uart_data->gpiod_rts)
+ gpiod_set_value(cdns_uart_data->gpiod_rts, !(mctrl & TIOCM_RTS));
if (mctrl & TIOCM_DTR)
val |= CDNS_UART_MODEMCR_DTR;
if (mctrl & TIOCM_LOOP)
@@ -1456,6 +1600,39 @@
static int instances;
/**
+ * cdns_rs485_config - Called when an application calls TIOCSRS485 ioctl.
+ * @port: Pointer to the uart_port structure
+ * @termios: Pointer to the ktermios structure
+ * @rs485: Pointer to the serial_rs485 structure
+ *
+ * Return: 0
+ */
+static int cdns_rs485_config(struct uart_port *port, struct ktermios *termios,
+ struct serial_rs485 *rs485)
+{
+ u32 val;
+ struct cdns_uart *cdns_uart = port->private_data;
+
+ if (rs485->flags & SER_RS485_ENABLED) {
+ dev_dbg(port->dev, "Setting UART to RS485\n");
+ /* Make sure auto RTS is disabled */
+ val = readl(port->membase + CDNS_UART_MODEMCR);
+ val &= ~CDNS_UART_MODEMCR_FCM;
+ writel(val, port->membase + CDNS_UART_MODEMCR);
+
+ /* Timer setup */
+ hrtimer_init(&cdns_uart->tx_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ cdns_uart->tx_timer.function = &cdns_rs485_tx_callback;
+
+ /* Disable transmitter and make Rx setup*/
+ cdns_uart_stop_tx(port);
+ } else {
+ hrtimer_cancel(&cdns_uart->tx_timer);
+ }
+ return 0;
+}
+
+/**
* cdns_uart_probe - Platform driver probe
* @pdev: Pointer to the platform device structure
*
@@ -1597,9 +1774,23 @@
port->private_data = cdns_uart_data;
port->read_status_mask = CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_RXTRIG |
CDNS_UART_IXR_OVERRUN | CDNS_UART_IXR_TOUT;
+ port->rs485_config = cdns_rs485_config;
+ port->rs485_supported = cdns_rs485_supported;
cdns_uart_data->port = port;
platform_set_drvdata(pdev, port);
+ rc = uart_get_rs485_mode(port);
+ if (rc)
+ goto err_out_clk_notifier;
+
+ cdns_uart_data->gpiod_rts = devm_gpiod_get_optional(&pdev->dev, "rts",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(cdns_uart_data->gpiod_rts)) {
+ rc = PTR_ERR(cdns_uart_data->gpiod_rts);
+ dev_err(port->dev, "xuartps: devm_gpiod_get_optional failed\n");
+ goto err_out_clk_notifier;
+ }
+
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, UART_AUTOSUSPEND_TIMEOUT);
pm_runtime_set_active(&pdev->dev);
@@ -1618,6 +1809,8 @@
console_port = port;
}
#endif
+ if (cdns_uart_data->port->rs485.flags & SER_RS485_ENABLED)
+ cdns_rs485_rx_setup(cdns_uart_data);
rc = uart_add_one_port(&cdns_uart_uart_driver, port);
if (rc) {
@@ -1646,6 +1839,7 @@
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_dont_use_autosuspend(&pdev->dev);
+err_out_clk_notifier:
#ifdef CONFIG_COMMON_CLK
clk_notifier_unregister(cdns_uart_data->uartclk,
&cdns_uart_data->clk_rate_change_nb);
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index f8883af..79f0ff9 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -7,6 +7,7 @@
#include <linux/errno.h>
#include <linux/minmax.h>
#include <linux/tty.h>
+#include <linux/tty_buffer.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/timer.h>
diff --git a/drivers/tty/vt/Makefile b/drivers/tty/vt/Makefile
index b3dfe9d..2c8ce8b 100644
--- a/drivers/tty/vt/Makefile
+++ b/drivers/tty/vt/Makefile
@@ -5,9 +5,9 @@
FONTMAPFILE = cp437.uni
obj-$(CONFIG_VT) += vt_ioctl.o vc_screen.o \
- selection.o keyboard.o
+ selection.o keyboard.o \
+ vt.o defkeymap.o
obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o
-obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o
# Files generated that shall be removed upon make clean
clean-files := consolemap_deftbl.c defkeymap.c
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index 8967c3a..564341f 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -7,7 +7,7 @@
* 'int set_selection_kernel(struct tiocl_selection *, struct tty_struct *)'
* 'void clear_selection(void)'
* 'int paste_selection(struct tty_struct *)'
- * 'int sel_loadlut(char __user *)'
+ * 'int sel_loadlut(u32 __user *)'
*
* Now that /dev/vcs exists, most of this can disappear again.
*/
@@ -73,10 +73,12 @@
}
/**
- * clear_selection - remove current selection
+ * clear_selection - remove current selection
*
- * Remove the current selection highlight, if any from the console
- * holding the selection. The caller must hold the console lock.
+ * Remove the current selection highlight, if any from the console holding the
+ * selection.
+ *
+ * Locking: The caller must hold the console lock.
*/
void clear_selection(void)
{
@@ -88,7 +90,7 @@
}
EXPORT_SYMBOL_GPL(clear_selection);
-bool vc_is_sel(struct vc_data *vc)
+bool vc_is_sel(const struct vc_data *vc)
{
return vc == vc_sel.cons;
}
@@ -110,18 +112,25 @@
}
/**
- * sel_loadlut() - load the LUT table
- * @p: user table
+ * sel_loadlut() - load the LUT table
+ * @lut: user table
*
- * Load the LUT table from user space. The caller must hold the console
- * lock. Make a temporary copy so a partial update doesn't make a mess.
+ * Load the LUT table from user space. Make a temporary copy so a partial
+ * update doesn't make a mess.
+ *
+ * Locking: The console lock is acquired.
*/
-int sel_loadlut(char __user *p)
+int sel_loadlut(u32 __user *lut)
{
u32 tmplut[ARRAY_SIZE(inwordLut)];
- if (copy_from_user(tmplut, (u32 __user *)(p+4), sizeof(inwordLut)))
+
+ if (copy_from_user(tmplut, lut, sizeof(inwordLut)))
return -EFAULT;
+
+ console_lock();
memcpy(inwordLut, tmplut, sizeof(inwordLut));
+ console_unlock();
+
return 0;
}
@@ -166,14 +175,14 @@
}
/**
- * set_selection_user - set the current selection.
- * @sel: user selection info
- * @tty: the console tty
+ * set_selection_user - set the current selection.
+ * @sel: user selection info
+ * @tty: the console tty
*
- * Invoked by the ioctl handle for the vt layer.
+ * Invoked by the ioctl handle for the vt layer.
*
- * The entire selection process is managed under the console_lock. It's
- * a lot under the lock but its hardly a performance path
+ * Locking: The entire selection process is managed under the console_lock.
+ * It's a lot under the lock but its hardly a performance path.
*/
int set_selection_user(const struct tiocl_selection __user *sel,
struct tty_struct *tty)
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 38a765e..9b5b98d 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -145,7 +145,7 @@
static void save_cur(struct vc_data *vc);
static void reset_terminal(struct vc_data *vc, int do_clear);
static void con_flush_chars(struct tty_struct *tty);
-static int set_vesa_blanking(char __user *p);
+static int set_vesa_blanking(u8 __user *mode);
static void set_cursor(struct vc_data *vc);
static void hide_cursor(struct vc_data *vc);
static void console_callback(struct work_struct *ignored);
@@ -175,7 +175,7 @@
int console_blanked;
EXPORT_SYMBOL(console_blanked);
-static int vesa_blank_mode; /* 0:none 1:suspendV 2:suspendH 3:powerdown */
+static enum vesa_blank_mode vesa_blank_mode;
static int vesa_off_interval;
static int blankinterval;
core_param(consoleblank, blankinterval, int, 0444);
@@ -286,18 +286,20 @@
return con_is_visible(vc) && !console_blanked;
}
-static inline unsigned short *screenpos(const struct vc_data *vc, int offset,
- bool viewed)
+static inline u16 *screenpos(const struct vc_data *vc, unsigned int offset,
+ bool viewed)
{
- unsigned short *p;
-
- if (!viewed)
- p = (unsigned short *)(vc->vc_origin + offset);
- else if (!vc->vc_sw->con_screen_pos)
- p = (unsigned short *)(vc->vc_visible_origin + offset);
+ unsigned long origin = viewed ? vc->vc_visible_origin : vc->vc_origin;
+
+ return (u16 *)(origin + offset);
+}
+
+static void con_putc(struct vc_data *vc, u16 ca, unsigned int y, unsigned int x)
+{
+ if (vc->vc_sw->con_putc)
+ vc->vc_sw->con_putc(vc, ca, y, x);
else
- p = vc->vc_sw->con_screen_pos(vc, offset);
- return p;
+ vc->vc_sw->con_putcs(vc, &ca, 1, y, x);
}
/* Called from the keyboard irq path.. */
@@ -591,18 +593,12 @@
static void do_update_region(struct vc_data *vc, unsigned long start, int count)
{
unsigned int xx, yy, offset;
- u16 *p;
+ u16 *p = (u16 *)start;
- p = (u16 *) start;
- if (!vc->vc_sw->con_getxy) {
- offset = (start - vc->vc_origin) / 2;
- xx = offset % vc->vc_cols;
- yy = offset / vc->vc_cols;
- } else {
- int nxx, nyy;
- start = vc->vc_sw->con_getxy(vc, start, &nxx, &nyy);
- xx = nxx; yy = nyy;
- }
+ offset = (start - vc->vc_origin) / 2;
+ xx = offset % vc->vc_cols;
+ yy = offset / vc->vc_cols;
+
for(;;) {
u16 attrib = scr_readw(p) & 0xff00;
int startx = xx;
@@ -625,10 +621,6 @@
break;
xx = 0;
yy++;
- if (vc->vc_sw->con_getxy) {
- p = (u16 *)start;
- start = vc->vc_sw->con_getxy(vc, start, NULL, NULL);
- }
}
}
@@ -703,7 +695,7 @@
/* Note: inverting the screen twice should revert to the original state */
void invert_screen(struct vc_data *vc, int offset, int count, bool viewed)
{
- unsigned short *p;
+ u16 *p;
WARN_CONSOLE_UNLOCKED();
@@ -762,7 +754,7 @@
old_offset < vc->vc_screenbuf_size) {
scr_writew(old, screenpos(vc, old_offset, true));
if (con_should_update(vc))
- vc->vc_sw->con_putc(vc, old, oldy, oldx);
+ con_putc(vc, old, oldy, oldx);
notify_update(vc);
}
@@ -771,15 +763,14 @@
if (offset != -1 && offset >= 0 &&
offset < vc->vc_screenbuf_size) {
unsigned short new;
- unsigned short *p;
- p = screenpos(vc, offset, true);
+ u16 *p = screenpos(vc, offset, true);
old = scr_readw(p);
new = old ^ vc->vc_complement_mask;
scr_writew(new, p);
if (con_should_update(vc)) {
oldx = (offset >> 1) % vc->vc_cols;
oldy = (offset >> 1) / vc->vc_cols;
- vc->vc_sw->con_putc(vc, new, oldy, oldx);
+ con_putc(vc, new, oldy, oldx);
}
notify_update(vc);
}
@@ -833,7 +824,7 @@
i ^= CUR_FG;
scr_writew(i, (u16 *)vc->vc_pos);
if (con_should_update(vc))
- vc->vc_sw->con_putc(vc, i, vc->state.y, vc->state.x);
+ con_putc(vc, i, vc->state.y, vc->state.x);
}
static void hide_softcursor(struct vc_data *vc)
@@ -841,8 +832,8 @@
if (softcursor_original != -1) {
scr_writew(softcursor_original, (u16 *)vc->vc_pos);
if (con_should_update(vc))
- vc->vc_sw->con_putc(vc, softcursor_original,
- vc->state.y, vc->state.x);
+ con_putc(vc, softcursor_original, vc->state.y,
+ vc->state.x);
softcursor_original = -1;
}
}
@@ -852,7 +843,7 @@
if (vc_is_sel(vc))
clear_selection();
- vc->vc_sw->con_cursor(vc, CM_ERASE);
+ vc->vc_sw->con_cursor(vc, false);
hide_softcursor(vc);
}
@@ -865,7 +856,7 @@
clear_selection();
add_softcursor(vc);
if (CUR_SIZE(vc->vc_cursor_type) != CUR_NONE)
- vc->vc_sw->con_cursor(vc, CM_DRAW);
+ vc->vc_sw->con_cursor(vc, true);
} else
hide_cursor(vc);
}
@@ -897,21 +888,18 @@
WARN_CONSOLE_UNLOCKED();
set_origin(vc);
- if (vc->vc_sw->con_flush_scrollback) {
- vc->vc_sw->con_flush_scrollback(vc);
- } else if (con_is_visible(vc)) {
- /*
- * When no con_flush_scrollback method is provided then the
- * legacy way for flushing the scrollback buffer is to use
- * a side effect of the con_switch method. We do it only on
- * the foreground console as background consoles have no
- * scrollback buffers in that case and we obviously don't
- * want to switch to them.
- */
- hide_cursor(vc);
- vc->vc_sw->con_switch(vc);
- set_cursor(vc);
- }
+ if (!con_is_visible(vc))
+ return;
+
+ /*
+ * The legacy way for flushing the scrollback buffer is to use a side
+ * effect of the con_switch method. We do it only on the foreground
+ * console as background consoles have no scrollback buffers in that
+ * case and we obviously don't want to switch to them.
+ */
+ hide_cursor(vc);
+ vc->vc_sw->con_switch(vc);
+ set_cursor(vc);
}
/*
@@ -962,7 +950,7 @@
}
if (redraw) {
- int update;
+ bool update;
int old_was_color = vc->vc_can_do_color;
set_origin(vc);
@@ -999,7 +987,7 @@
return (i < MAX_NR_CONSOLES && vc_cons[i].d);
}
-static void visual_init(struct vc_data *vc, int num, int init)
+static void visual_init(struct vc_data *vc, int num, bool init)
{
/* ++Geert: vc->vc_sw->con_init determines console size */
if (vc->vc_sw)
@@ -1083,7 +1071,7 @@
vc->port.ops = &vc_port_ops;
INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
- visual_init(vc, currcons, 1);
+ visual_init(vc, currcons, true);
if (!*vc->uni_pagedict_loc)
con_set_default_unimap(vc);
@@ -1115,51 +1103,44 @@
}
static inline int resize_screen(struct vc_data *vc, int width, int height,
- int user)
+ bool from_user)
{
/* Resizes the resolution of the display adapater */
int err = 0;
if (vc->vc_sw->con_resize)
- err = vc->vc_sw->con_resize(vc, width, height, user);
+ err = vc->vc_sw->con_resize(vc, width, height, from_user);
return err;
}
/**
- * vc_do_resize - resizing method for the tty
- * @tty: tty being resized
- * @vc: virtual console private data
- * @cols: columns
- * @lines: lines
+ * vc_do_resize - resizing method for the tty
+ * @tty: tty being resized
+ * @vc: virtual console private data
+ * @cols: columns
+ * @lines: lines
+ * @from_user: invoked by a user?
*
- * Resize a virtual console, clipping according to the actual constraints.
- * If the caller passes a tty structure then update the termios winsize
- * information and perform any necessary signal handling.
+ * Resize a virtual console, clipping according to the actual constraints. If
+ * the caller passes a tty structure then update the termios winsize
+ * information and perform any necessary signal handling.
*
- * Caller must hold the console semaphore. Takes the termios rwsem and
- * ctrl.lock of the tty IFF a tty is passed.
+ * Locking: Caller must hold the console semaphore. Takes the termios rwsem and
+ * ctrl.lock of the tty IFF a tty is passed.
*/
-
static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
- unsigned int cols, unsigned int lines)
+ unsigned int cols, unsigned int lines, bool from_user)
{
unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0;
unsigned long end;
unsigned int old_rows, old_row_size, first_copied_row;
unsigned int new_cols, new_rows, new_row_size, new_screen_size;
- unsigned int user;
unsigned short *oldscreen, *newscreen;
u32 **new_uniscr = NULL;
WARN_CONSOLE_UNLOCKED();
- if (!vc)
- return -ENXIO;
-
- user = vc->vc_resize_user;
- vc->vc_resize_user = 0;
-
if (cols > VC_MAXCOL || lines > VC_MAXROW)
return -EINVAL;
@@ -1185,7 +1166,7 @@
* to deal with possible errors from the code below, we call
* the resize_screen here as well.
*/
- return resize_screen(vc, new_cols, new_rows, user);
+ return resize_screen(vc, new_cols, new_rows, from_user);
}
if (new_screen_size > KMALLOC_MAX_SIZE || !new_screen_size)
@@ -1208,7 +1189,7 @@
old_rows = vc->vc_rows;
old_row_size = vc->vc_size_row;
- err = resize_screen(vc, new_cols, new_rows, user);
+ err = resize_screen(vc, new_cols, new_rows, from_user);
if (err) {
kfree(newscreen);
vc_uniscr_free(new_uniscr);
@@ -1295,34 +1276,35 @@
}
/**
- * vc_resize - resize a VT
- * @vc: virtual console
- * @cols: columns
- * @rows: rows
+ * __vc_resize - resize a VT
+ * @vc: virtual console
+ * @cols: columns
+ * @rows: rows
+ * @from_user: invoked by a user?
*
- * Resize a virtual console as seen from the console end of things. We
- * use the common vc_do_resize methods to update the structures. The
- * caller must hold the console sem to protect console internals and
- * vc->port.tty
+ * Resize a virtual console as seen from the console end of things. We use the
+ * common vc_do_resize() method to update the structures.
+ *
+ * Locking: The caller must hold the console sem to protect console internals
+ * and @vc->port.tty.
*/
-
-int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows)
+int __vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows,
+ bool from_user)
{
- return vc_do_resize(vc->port.tty, vc, cols, rows);
+ return vc_do_resize(vc->port.tty, vc, cols, rows, from_user);
}
-EXPORT_SYMBOL(vc_resize);
+EXPORT_SYMBOL(__vc_resize);
/**
- * vt_resize - resize a VT
- * @tty: tty to resize
- * @ws: winsize attributes
+ * vt_resize - resize a VT
+ * @tty: tty to resize
+ * @ws: winsize attributes
*
- * Resize a virtual terminal. This is called by the tty layer as we
- * register our own handler for resizing. The mutual helper does all
- * the actual work.
+ * Resize a virtual terminal. This is called by the tty layer as we register
+ * our own handler for resizing. The mutual helper does all the actual work.
*
- * Takes the console sem and the called methods then take the tty
- * termios_rwsem and the tty ctrl.lock in that order.
+ * Locking: Takes the console sem and the called methods then take the tty
+ * termios_rwsem and the tty ctrl.lock in that order.
*/
static int vt_resize(struct tty_struct *tty, struct winsize *ws)
{
@@ -1330,7 +1312,7 @@
int ret;
console_lock();
- ret = vc_do_resize(tty, vc, ws->ws_col, ws->ws_row);
+ ret = vc_do_resize(tty, vc, ws->ws_col, ws->ws_row, false);
console_unlock();
return ret;
}
@@ -1503,36 +1485,43 @@
/* ignored */
}
-static void csi_J(struct vc_data *vc, int vpar)
+enum CSI_J {
+ CSI_J_CURSOR_TO_END = 0,
+ CSI_J_START_TO_CURSOR = 1,
+ CSI_J_VISIBLE = 2,
+ CSI_J_FULL = 3,
+};
+
+static void csi_J(struct vc_data *vc, enum CSI_J vpar)
{
+ unsigned short *start;
unsigned int count;
- unsigned short * start;
switch (vpar) {
- case 0: /* erase from cursor to end of display */
- vc_uniscr_clear_line(vc, vc->state.x,
- vc->vc_cols - vc->state.x);
- vc_uniscr_clear_lines(vc, vc->state.y + 1,
- vc->vc_rows - vc->state.y - 1);
- count = (vc->vc_scr_end - vc->vc_pos) >> 1;
- start = (unsigned short *)vc->vc_pos;
- break;
- case 1: /* erase from start to cursor */
- vc_uniscr_clear_line(vc, 0, vc->state.x + 1);
- vc_uniscr_clear_lines(vc, 0, vc->state.y);
- count = ((vc->vc_pos - vc->vc_origin) >> 1) + 1;
- start = (unsigned short *)vc->vc_origin;
- break;
- case 3: /* include scrollback */
- flush_scrollback(vc);
- fallthrough;
- case 2: /* erase whole display */
- vc_uniscr_clear_lines(vc, 0, vc->vc_rows);
- count = vc->vc_cols * vc->vc_rows;
- start = (unsigned short *)vc->vc_origin;
- break;
- default:
- return;
+ case CSI_J_CURSOR_TO_END:
+ vc_uniscr_clear_line(vc, vc->state.x,
+ vc->vc_cols - vc->state.x);
+ vc_uniscr_clear_lines(vc, vc->state.y + 1,
+ vc->vc_rows - vc->state.y - 1);
+ count = (vc->vc_scr_end - vc->vc_pos) >> 1;
+ start = (unsigned short *)vc->vc_pos;
+ break;
+ case CSI_J_START_TO_CURSOR:
+ vc_uniscr_clear_line(vc, 0, vc->state.x + 1);
+ vc_uniscr_clear_lines(vc, 0, vc->state.y);
+ count = ((vc->vc_pos - vc->vc_origin) >> 1) + 1;
+ start = (unsigned short *)vc->vc_origin;
+ break;
+ case CSI_J_FULL:
+ flush_scrollback(vc);
+ fallthrough;
+ case CSI_J_VISIBLE:
+ vc_uniscr_clear_lines(vc, 0, vc->vc_rows);
+ count = vc->vc_cols * vc->vc_rows;
+ start = (unsigned short *)vc->vc_origin;
+ break;
+ default:
+ return;
}
scr_memsetw(start, vc->vc_video_erase_char, 2 * count);
if (con_should_update(vc))
@@ -1540,27 +1529,33 @@
vc->vc_need_wrap = 0;
}
-static void csi_K(struct vc_data *vc, int vpar)
+enum {
+ CSI_K_CURSOR_TO_LINEEND = 0,
+ CSI_K_LINESTART_TO_CURSOR = 1,
+ CSI_K_LINE = 2,
+};
+
+static void csi_K(struct vc_data *vc)
{
unsigned int count;
unsigned short *start = (unsigned short *)vc->vc_pos;
int offset;
- switch (vpar) {
- case 0: /* erase from cursor to end of line */
- offset = 0;
- count = vc->vc_cols - vc->state.x;
- break;
- case 1: /* erase from start of line to cursor */
- offset = -vc->state.x;
- count = vc->state.x + 1;
- break;
- case 2: /* erase whole line */
- offset = -vc->state.x;
- count = vc->vc_cols;
- break;
- default:
- return;
+ switch (vc->vc_par[0]) {
+ case CSI_K_CURSOR_TO_LINEEND:
+ offset = 0;
+ count = vc->vc_cols - vc->state.x;
+ break;
+ case CSI_K_LINESTART_TO_CURSOR:
+ offset = -vc->state.x;
+ count = vc->state.x + 1;
+ break;
+ case CSI_K_LINE:
+ offset = -vc->state.x;
+ count = vc->vc_cols;
+ break;
+ default:
+ return;
}
vc_uniscr_clear_line(vc, vc->state.x + offset, count);
scr_memsetw(start + offset, vc->vc_video_erase_char, 2 * count);
@@ -1569,20 +1564,15 @@
do_update_region(vc, (unsigned long)(start + offset), count);
}
-/* erase the following vpar positions */
-static void csi_X(struct vc_data *vc, unsigned int vpar)
+/* erase the following count positions */
+static void csi_X(struct vc_data *vc)
{ /* not vt100? */
- unsigned int count;
-
- if (!vpar)
- vpar++;
-
- count = min(vpar, vc->vc_cols - vc->state.x);
+ unsigned int count = clamp(vc->vc_par[0], 1, vc->vc_cols - vc->state.x);
vc_uniscr_clear_line(vc, vc->state.x, count);
scr_memsetw((unsigned short *)vc->vc_pos, vc->vc_video_erase_char, 2 * count);
if (con_should_update(vc))
- vc->vc_sw->con_clear(vc, vc->state.y, vc->state.x, 1, count);
+ vc->vc_sw->con_clear(vc, vc->state.y, vc->state.x, count);
vc->vc_need_wrap = 0;
}
@@ -1598,7 +1588,7 @@
struct rgb { u8 r; u8 g; u8 b; };
-static void rgb_from_256(int i, struct rgb *c)
+static void rgb_from_256(unsigned int i, struct rgb *c)
{
if (i < 8) { /* Standard colours. */
c->r = i&1 ? 0xaa : 0x00;
@@ -1609,9 +1599,12 @@
c->g = i&2 ? 0xff : 0x55;
c->b = i&4 ? 0xff : 0x55;
} else if (i < 232) { /* 6x6x6 colour cube. */
- c->r = (i - 16) / 36 * 85 / 2;
- c->g = (i - 16) / 6 % 6 * 85 / 2;
- c->b = (i - 16) % 6 * 85 / 2;
+ i -= 16;
+ c->b = i % 6 * 255 / 6;
+ i /= 6;
+ c->g = i % 6 * 255 / 6;
+ i /= 6;
+ c->r = i * 255 / 6;
} else /* Grayscale ramp. */
c->r = c->g = c->b = i * 10 - 2312;
}
@@ -1681,6 +1674,39 @@
return i;
}
+enum {
+ CSI_m_DEFAULT = 0,
+ CSI_m_BOLD = 1,
+ CSI_m_HALF_BRIGHT = 2,
+ CSI_m_ITALIC = 3,
+ CSI_m_UNDERLINE = 4,
+ CSI_m_BLINK = 5,
+ CSI_m_REVERSE = 7,
+ CSI_m_PRI_FONT = 10,
+ CSI_m_ALT_FONT1 = 11,
+ CSI_m_ALT_FONT2 = 12,
+ CSI_m_DOUBLE_UNDERLINE = 21,
+ CSI_m_NORMAL_INTENSITY = 22,
+ CSI_m_NO_ITALIC = 23,
+ CSI_m_NO_UNDERLINE = 24,
+ CSI_m_NO_BLINK = 25,
+ CSI_m_NO_REVERSE = 27,
+ CSI_m_FG_COLOR_BEG = 30,
+ CSI_m_FG_COLOR_END = 37,
+ CSI_m_FG_COLOR = 38,
+ CSI_m_DEFAULT_FG_COLOR = 39,
+ CSI_m_BG_COLOR_BEG = 40,
+ CSI_m_BG_COLOR_END = 47,
+ CSI_m_BG_COLOR = 48,
+ CSI_m_DEFAULT_BG_COLOR = 49,
+ CSI_m_BRIGHT_FG_COLOR_BEG = 90,
+ CSI_m_BRIGHT_FG_COLOR_END = 97,
+ CSI_m_BRIGHT_FG_COLOR_OFF = CSI_m_BRIGHT_FG_COLOR_BEG - CSI_m_FG_COLOR_BEG,
+ CSI_m_BRIGHT_BG_COLOR_BEG = 100,
+ CSI_m_BRIGHT_BG_COLOR_END = 107,
+ CSI_m_BRIGHT_BG_COLOR_OFF = CSI_m_BRIGHT_BG_COLOR_BEG - CSI_m_BG_COLOR_BEG,
+};
+
/* console_lock is held */
static void csi_m(struct vc_data *vc)
{
@@ -1688,33 +1714,33 @@
for (i = 0; i <= vc->vc_npar; i++)
switch (vc->vc_par[i]) {
- case 0: /* all attributes off */
+ case CSI_m_DEFAULT: /* all attributes off */
default_attr(vc);
break;
- case 1:
+ case CSI_m_BOLD:
vc->state.intensity = VCI_BOLD;
break;
- case 2:
+ case CSI_m_HALF_BRIGHT:
vc->state.intensity = VCI_HALF_BRIGHT;
break;
- case 3:
+ case CSI_m_ITALIC:
vc->state.italic = true;
break;
- case 21:
+ case CSI_m_DOUBLE_UNDERLINE:
/*
* No console drivers support double underline, so
* convert it to a single underline.
*/
- case 4:
+ case CSI_m_UNDERLINE:
vc->state.underline = true;
break;
- case 5:
+ case CSI_m_BLINK:
vc->state.blink = true;
break;
- case 7:
+ case CSI_m_REVERSE:
vc->state.reverse = true;
break;
- case 10: /* ANSI X3.64-1979 (SCO-ish?)
+ case CSI_m_PRI_FONT: /* ANSI X3.64-1979 (SCO-ish?)
* Select primary font, don't display control chars if
* defined, don't set bit 8 on output.
*/
@@ -1722,7 +1748,7 @@
vc->vc_disp_ctrl = 0;
vc->vc_toggle_meta = 0;
break;
- case 11: /* ANSI X3.64-1979 (SCO-ish?)
+ case CSI_m_ALT_FONT1: /* ANSI X3.64-1979 (SCO-ish?)
* Select first alternate font, lets chars < 32 be
* displayed as ROM chars.
*/
@@ -1730,7 +1756,7 @@
vc->vc_disp_ctrl = 1;
vc->vc_toggle_meta = 0;
break;
- case 12: /* ANSI X3.64-1979 (SCO-ish?)
+ case CSI_m_ALT_FONT2: /* ANSI X3.64-1979 (SCO-ish?)
* Select second alternate font, toggle high bit
* before displaying as ROM char.
*/
@@ -1738,47 +1764,51 @@
vc->vc_disp_ctrl = 1;
vc->vc_toggle_meta = 1;
break;
- case 22:
+ case CSI_m_NORMAL_INTENSITY:
vc->state.intensity = VCI_NORMAL;
break;
- case 23:
+ case CSI_m_NO_ITALIC:
vc->state.italic = false;
break;
- case 24:
+ case CSI_m_NO_UNDERLINE:
vc->state.underline = false;
break;
- case 25:
+ case CSI_m_NO_BLINK:
vc->state.blink = false;
break;
- case 27:
+ case CSI_m_NO_REVERSE:
vc->state.reverse = false;
break;
- case 38:
+ case CSI_m_FG_COLOR:
i = vc_t416_color(vc, i, rgb_foreground);
break;
- case 48:
+ case CSI_m_BG_COLOR:
i = vc_t416_color(vc, i, rgb_background);
break;
- case 39:
+ case CSI_m_DEFAULT_FG_COLOR:
vc->state.color = (vc->vc_def_color & 0x0f) |
(vc->state.color & 0xf0);
break;
- case 49:
+ case CSI_m_DEFAULT_BG_COLOR:
vc->state.color = (vc->vc_def_color & 0xf0) |
(vc->state.color & 0x0f);
break;
- default:
- if (vc->vc_par[i] >= 90 && vc->vc_par[i] <= 107) {
- if (vc->vc_par[i] < 100)
- vc->state.intensity = VCI_BOLD;
- vc->vc_par[i] -= 60;
- }
- if (vc->vc_par[i] >= 30 && vc->vc_par[i] <= 37)
- vc->state.color = color_table[vc->vc_par[i] - 30]
- | (vc->state.color & 0xf0);
- else if (vc->vc_par[i] >= 40 && vc->vc_par[i] <= 47)
- vc->state.color = (color_table[vc->vc_par[i] - 40] << 4)
- | (vc->state.color & 0x0f);
+ case CSI_m_BRIGHT_FG_COLOR_BEG ... CSI_m_BRIGHT_FG_COLOR_END:
+ vc->state.intensity = VCI_BOLD;
+ vc->vc_par[i] -= CSI_m_BRIGHT_FG_COLOR_OFF;
+ fallthrough;
+ case CSI_m_FG_COLOR_BEG ... CSI_m_FG_COLOR_END:
+ vc->vc_par[i] -= CSI_m_FG_COLOR_BEG;
+ vc->state.color = color_table[vc->vc_par[i]] |
+ (vc->state.color & 0xf0);
+ break;
+ case CSI_m_BRIGHT_BG_COLOR_BEG ... CSI_m_BRIGHT_BG_COLOR_END:
+ vc->vc_par[i] -= CSI_m_BRIGHT_BG_COLOR_OFF;
+ fallthrough;
+ case CSI_m_BG_COLOR_BEG ... CSI_m_BG_COLOR_END:
+ vc->vc_par[i] -= CSI_m_BG_COLOR_BEG;
+ vc->state.color = (color_table[vc->vc_par[i]] << 4) |
+ (vc->state.color & 0x0f);
break;
}
update_attr(vc);
@@ -1832,133 +1862,175 @@
return vc_cons[fg_console].d->vc_report_mouse;
}
+enum {
+ CSI_DEC_hl_CURSOR_KEYS = 1, /* CKM: cursor keys send ^[Ox/^[[x */
+ CSI_DEC_hl_132_COLUMNS = 3, /* COLM: 80/132 mode switch */
+ CSI_DEC_hl_REVERSE_VIDEO = 5, /* SCNM */
+ CSI_DEC_hl_ORIGIN_MODE = 6, /* OM: origin relative/absolute */
+ CSI_DEC_hl_AUTOWRAP = 7, /* AWM */
+ CSI_DEC_hl_AUTOREPEAT = 8, /* ARM */
+ CSI_DEC_hl_MOUSE_X10 = 9,
+ CSI_DEC_hl_SHOW_CURSOR = 25, /* TCEM */
+ CSI_DEC_hl_MOUSE_VT200 = 1000,
+};
+
/* console_lock is held */
-static void set_mode(struct vc_data *vc, int on_off)
+static void csi_DEC_hl(struct vc_data *vc, bool on_off)
{
- int i;
+ unsigned int i;
for (i = 0; i <= vc->vc_npar; i++)
- if (vc->vc_priv == EPdec) {
- switch(vc->vc_par[i]) { /* DEC private modes set/reset */
- case 1: /* Cursor keys send ^[Ox/^[[x */
- if (on_off)
- set_kbd(vc, decckm);
- else
- clr_kbd(vc, decckm);
- break;
- case 3: /* 80/132 mode switch unimplemented */
+ switch (vc->vc_par[i]) {
+ case CSI_DEC_hl_CURSOR_KEYS:
+ if (on_off)
+ set_kbd(vc, decckm);
+ else
+ clr_kbd(vc, decckm);
+ break;
+ case CSI_DEC_hl_132_COLUMNS: /* unimplemented */
#if 0
- vc_resize(deccolm ? 132 : 80, vc->vc_rows);
- /* this alone does not suffice; some user mode
- utility has to change the hardware regs */
+ vc_resize(deccolm ? 132 : 80, vc->vc_rows);
+ /* this alone does not suffice; some user mode
+ utility has to change the hardware regs */
#endif
- break;
- case 5: /* Inverted screen on/off */
- if (vc->vc_decscnm != on_off) {
- vc->vc_decscnm = on_off;
- invert_screen(vc, 0,
- vc->vc_screenbuf_size,
- false);
- update_attr(vc);
- }
- break;
- case 6: /* Origin relative/absolute */
- vc->vc_decom = on_off;
- gotoxay(vc, 0, 0);
- break;
- case 7: /* Autowrap on/off */
- vc->vc_decawm = on_off;
- break;
- case 8: /* Autorepeat on/off */
- if (on_off)
- set_kbd(vc, decarm);
- else
- clr_kbd(vc, decarm);
- break;
- case 9:
- vc->vc_report_mouse = on_off ? 1 : 0;
- break;
- case 25: /* Cursor on/off */
- vc->vc_deccm = on_off;
- break;
- case 1000:
- vc->vc_report_mouse = on_off ? 2 : 0;
- break;
+ break;
+ case CSI_DEC_hl_REVERSE_VIDEO:
+ if (vc->vc_decscnm != on_off) {
+ vc->vc_decscnm = on_off;
+ invert_screen(vc, 0, vc->vc_screenbuf_size,
+ false);
+ update_attr(vc);
}
- } else {
- switch(vc->vc_par[i]) { /* ANSI modes set/reset */
- case 3: /* Monitor (display ctrls) */
- vc->vc_disp_ctrl = on_off;
- break;
- case 4: /* Insert Mode on/off */
- vc->vc_decim = on_off;
- break;
- case 20: /* Lf, Enter == CrLf/Lf */
- if (on_off)
- set_kbd(vc, lnm);
- else
- clr_kbd(vc, lnm);
- break;
- }
+ break;
+ case CSI_DEC_hl_ORIGIN_MODE:
+ vc->vc_decom = on_off;
+ gotoxay(vc, 0, 0);
+ break;
+ case CSI_DEC_hl_AUTOWRAP:
+ vc->vc_decawm = on_off;
+ break;
+ case CSI_DEC_hl_AUTOREPEAT:
+ if (on_off)
+ set_kbd(vc, decarm);
+ else
+ clr_kbd(vc, decarm);
+ break;
+ case CSI_DEC_hl_MOUSE_X10:
+ vc->vc_report_mouse = on_off ? 1 : 0;
+ break;
+ case CSI_DEC_hl_SHOW_CURSOR:
+ vc->vc_deccm = on_off;
+ break;
+ case CSI_DEC_hl_MOUSE_VT200:
+ vc->vc_report_mouse = on_off ? 2 : 0;
+ break;
}
}
+enum {
+ CSI_hl_DISPLAY_CTRL = 3, /* handle ansi control chars */
+ CSI_hl_INSERT = 4, /* IRM: insert/replace */
+ CSI_hl_AUTO_NL = 20, /* LNM: Enter == CrLf/Lf */
+};
+
/* console_lock is held */
-static void setterm_command(struct vc_data *vc)
+static void csi_hl(struct vc_data *vc, bool on_off)
+{
+ unsigned int i;
+
+ for (i = 0; i <= vc->vc_npar; i++)
+ switch (vc->vc_par[i]) { /* ANSI modes set/reset */
+ case CSI_hl_DISPLAY_CTRL:
+ vc->vc_disp_ctrl = on_off;
+ break;
+ case CSI_hl_INSERT:
+ vc->vc_decim = on_off;
+ break;
+ case CSI_hl_AUTO_NL:
+ if (on_off)
+ set_kbd(vc, lnm);
+ else
+ clr_kbd(vc, lnm);
+ break;
+ }
+}
+
+enum CSI_right_square_bracket {
+ CSI_RSB_COLOR_FOR_UNDERLINE = 1,
+ CSI_RSB_COLOR_FOR_HALF_BRIGHT = 2,
+ CSI_RSB_MAKE_CUR_COLOR_DEFAULT = 8,
+ CSI_RSB_BLANKING_INTERVAL = 9,
+ CSI_RSB_BELL_FREQUENCY = 10,
+ CSI_RSB_BELL_DURATION = 11,
+ CSI_RSB_BRING_CONSOLE_TO_FRONT = 12,
+ CSI_RSB_UNBLANK = 13,
+ CSI_RSB_VESA_OFF_INTERVAL = 14,
+ CSI_RSB_BRING_PREV_CONSOLE_TO_FRONT = 15,
+ CSI_RSB_CURSOR_BLINK_INTERVAL = 16,
+};
+
+/*
+ * csi_RSB - csi+] (Right Square Bracket) handler
+ *
+ * These are linux console private sequences.
+ *
+ * console_lock is held
+ */
+static void csi_RSB(struct vc_data *vc)
{
switch (vc->vc_par[0]) {
- case 1: /* set color for underline mode */
+ case CSI_RSB_COLOR_FOR_UNDERLINE:
if (vc->vc_can_do_color && vc->vc_par[1] < 16) {
vc->vc_ulcolor = color_table[vc->vc_par[1]];
if (vc->state.underline)
update_attr(vc);
}
break;
- case 2: /* set color for half intensity mode */
+ case CSI_RSB_COLOR_FOR_HALF_BRIGHT:
if (vc->vc_can_do_color && vc->vc_par[1] < 16) {
vc->vc_halfcolor = color_table[vc->vc_par[1]];
if (vc->state.intensity == VCI_HALF_BRIGHT)
update_attr(vc);
}
break;
- case 8: /* store colors as defaults */
+ case CSI_RSB_MAKE_CUR_COLOR_DEFAULT:
vc->vc_def_color = vc->vc_attr;
if (vc->vc_hi_font_mask == 0x100)
vc->vc_def_color >>= 1;
default_attr(vc);
update_attr(vc);
break;
- case 9: /* set blanking interval */
+ case CSI_RSB_BLANKING_INTERVAL:
blankinterval = min(vc->vc_par[1], 60U) * 60;
poke_blanked_console();
break;
- case 10: /* set bell frequency in Hz */
+ case CSI_RSB_BELL_FREQUENCY:
if (vc->vc_npar >= 1)
vc->vc_bell_pitch = vc->vc_par[1];
else
vc->vc_bell_pitch = DEFAULT_BELL_PITCH;
break;
- case 11: /* set bell duration in msec */
+ case CSI_RSB_BELL_DURATION:
if (vc->vc_npar >= 1)
vc->vc_bell_duration = (vc->vc_par[1] < 2000) ?
msecs_to_jiffies(vc->vc_par[1]) : 0;
else
vc->vc_bell_duration = DEFAULT_BELL_DURATION;
break;
- case 12: /* bring specified console to the front */
+ case CSI_RSB_BRING_CONSOLE_TO_FRONT:
if (vc->vc_par[1] >= 1 && vc_cons_allocated(vc->vc_par[1] - 1))
set_console(vc->vc_par[1] - 1);
break;
- case 13: /* unblank the screen */
+ case CSI_RSB_UNBLANK:
poke_blanked_console();
break;
- case 14: /* set vesa powerdown interval */
+ case CSI_RSB_VESA_OFF_INTERVAL:
vesa_off_interval = min(vc->vc_par[1], 60U) * 60 * HZ;
break;
- case 15: /* activate the previous console */
+ case CSI_RSB_BRING_PREV_CONSOLE_TO_FRONT:
set_console(last_console);
break;
- case 16: /* set cursor blink duration in msec */
+ case CSI_RSB_CURSOR_BLINK_INTERVAL:
if (vc->vc_npar >= 1 && vc->vc_par[1] >= 50 &&
vc->vc_par[1] <= USHRT_MAX)
vc->vc_cur_blink_ms = vc->vc_par[1];
@@ -1971,41 +2043,32 @@
/* console_lock is held */
static void csi_at(struct vc_data *vc, unsigned int nr)
{
- if (nr > vc->vc_cols - vc->state.x)
- nr = vc->vc_cols - vc->state.x;
- else if (!nr)
- nr = 1;
+ nr = clamp(nr, 1, vc->vc_cols - vc->state.x);
insert_char(vc, nr);
}
/* console_lock is held */
-static void csi_L(struct vc_data *vc, unsigned int nr)
+static void csi_L(struct vc_data *vc)
{
- if (nr > vc->vc_rows - vc->state.y)
- nr = vc->vc_rows - vc->state.y;
- else if (!nr)
- nr = 1;
+ unsigned int nr = clamp(vc->vc_par[0], 1, vc->vc_rows - vc->state.y);
+
con_scroll(vc, vc->state.y, vc->vc_bottom, SM_DOWN, nr);
vc->vc_need_wrap = 0;
}
/* console_lock is held */
-static void csi_P(struct vc_data *vc, unsigned int nr)
+static void csi_P(struct vc_data *vc)
{
- if (nr > vc->vc_cols - vc->state.x)
- nr = vc->vc_cols - vc->state.x;
- else if (!nr)
- nr = 1;
+ unsigned int nr = clamp(vc->vc_par[0], 1, vc->vc_cols - vc->state.x);
+
delete_char(vc, nr);
}
/* console_lock is held */
-static void csi_M(struct vc_data *vc, unsigned int nr)
+static void csi_M(struct vc_data *vc)
{
- if (nr > vc->vc_rows - vc->state.y)
- nr = vc->vc_rows - vc->state.y;
- else if (!nr)
- nr=1;
+ unsigned int nr = clamp(vc->vc_par[0], 1, vc->vc_rows - vc->state.y);
+
con_scroll(vc, vc->state.y, vc->vc_bottom, SM_UP, nr);
vc->vc_need_wrap = 0;
}
@@ -2028,9 +2091,48 @@
vc->vc_need_wrap = 0;
}
-enum { ESnormal, ESesc, ESsquare, ESgetpars, ESfunckey,
- EShash, ESsetG0, ESsetG1, ESpercent, EScsiignore, ESnonstd,
- ESpalette, ESosc, ESapc, ESpm, ESdcs };
+/**
+ * enum vc_ctl_state - control characters state of a vt
+ *
+ * @ESnormal: initial state, no control characters parsed
+ * @ESesc: ESC parsed
+ * @ESsquare: CSI parsed -- modifiers/parameters/ctrl chars expected
+ * @ESgetpars: CSI parsed -- parameters/ctrl chars expected
+ * @ESfunckey: CSI [ parsed
+ * @EShash: ESC # parsed
+ * @ESsetG0: ESC ( parsed
+ * @ESsetG1: ESC ) parsed
+ * @ESpercent: ESC % parsed
+ * @EScsiignore: CSI [0x20-0x3f] parsed
+ * @ESnonstd: OSC parsed
+ * @ESpalette: OSC P parsed
+ * @ESosc: OSC [0-9] parsed
+ * @ESANSI_first: first state for ignoring ansi control sequences
+ * @ESapc: ESC _ parsed
+ * @ESpm: ESC ^ parsed
+ * @ESdcs: ESC P parsed
+ * @ESANSI_last: last state for ignoring ansi control sequences
+ */
+enum vc_ctl_state {
+ ESnormal,
+ ESesc,
+ ESsquare,
+ ESgetpars,
+ ESfunckey,
+ EShash,
+ ESsetG0,
+ ESsetG1,
+ ESpercent,
+ EScsiignore,
+ ESnonstd,
+ ESpalette,
+ ESosc,
+ ESANSI_first = ESosc,
+ ESapc,
+ ESpm,
+ ESdcs,
+ ESANSI_last = ESdcs,
+};
/* console_lock is held (except via vc_init()) */
static void reset_terminal(struct vc_data *vc, int do_clear)
@@ -2078,10 +2180,10 @@
gotoxy(vc, 0, 0);
save_cur(vc);
if (do_clear)
- csi_J(vc, 2);
+ csi_J(vc, CSI_J_VISIBLE);
}
-static void vc_setGx(struct vc_data *vc, unsigned int which, int c)
+static void vc_setGx(struct vc_data *vc, unsigned int which, u8 c)
{
unsigned char *charset = &vc->state.Gx_charset[which];
@@ -2104,36 +2206,54 @@
vc->vc_translate = set_translate(*charset, vc);
}
-/* is this state an ANSI control string? */
-static bool ansi_control_string(unsigned int state)
+static bool ansi_control_string(enum vc_ctl_state state)
{
- if (state == ESosc || state == ESapc || state == ESpm || state == ESdcs)
- return true;
- return false;
+ return state >= ESANSI_first && state <= ESANSI_last;
}
-/* console_lock is held */
-static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c)
+enum {
+ ASCII_NULL = 0,
+ ASCII_BELL = 7,
+ ASCII_BACKSPACE = 8,
+ ASCII_IGNORE_FIRST = ASCII_BACKSPACE,
+ ASCII_HTAB = 9,
+ ASCII_LINEFEED = 10,
+ ASCII_VTAB = 11,
+ ASCII_FORMFEED = 12,
+ ASCII_CAR_RET = 13,
+ ASCII_IGNORE_LAST = ASCII_CAR_RET,
+ ASCII_SHIFTOUT = 14,
+ ASCII_SHIFTIN = 15,
+ ASCII_CANCEL = 24,
+ ASCII_SUBSTITUTE = 26,
+ ASCII_ESCAPE = 27,
+ ASCII_CSI_IGNORE_FIRST = ' ', /* 0x2x, 0x3a and 0x3c - 0x3f */
+ ASCII_CSI_IGNORE_LAST = '?',
+ ASCII_DEL = 127,
+ ASCII_EXT_CSI = 128 + ASCII_ESCAPE,
+};
+
+/*
+ * Handle ascii characters in control sequences and change states accordingly.
+ * E.g. ESC sets the state of vc to ESesc.
+ *
+ * Returns: true if @c handled.
+ */
+static bool handle_ascii(struct tty_struct *tty, struct vc_data *vc, u8 c)
{
- /*
- * Control characters can be used in the _middle_
- * of an escape sequence, aside from ANSI control strings.
- */
- if (ansi_control_string(vc->vc_state) && c >= 8 && c <= 13)
- return;
switch (c) {
- case 0:
- return;
- case 7:
+ case ASCII_NULL:
+ return true;
+ case ASCII_BELL:
if (ansi_control_string(vc->vc_state))
vc->vc_state = ESnormal;
else if (vc->vc_bell_duration)
kd_mksound(vc->vc_bell_pitch, vc->vc_bell_duration);
- return;
- case 8:
+ return true;
+ case ASCII_BACKSPACE:
bs(vc);
- return;
- case 9:
+ return true;
+ case ASCII_HTAB:
vc->vc_pos -= (vc->state.x << 1);
vc->state.x = find_next_bit(vc->vc_tab_stop,
@@ -2144,119 +2264,330 @@
vc->vc_pos += (vc->state.x << 1);
notify_write(vc, '\t');
- return;
- case 10: case 11: case 12:
+ return true;
+ case ASCII_LINEFEED:
+ case ASCII_VTAB:
+ case ASCII_FORMFEED:
lf(vc);
if (!is_kbd(vc, lnm))
- return;
+ return true;
fallthrough;
- case 13:
+ case ASCII_CAR_RET:
cr(vc);
- return;
- case 14:
+ return true;
+ case ASCII_SHIFTOUT:
vc->state.charset = 1;
vc->vc_translate = set_translate(vc->state.Gx_charset[1], vc);
vc->vc_disp_ctrl = 1;
- return;
- case 15:
+ return true;
+ case ASCII_SHIFTIN:
vc->state.charset = 0;
vc->vc_translate = set_translate(vc->state.Gx_charset[0], vc);
vc->vc_disp_ctrl = 0;
- return;
- case 24: case 26:
+ return true;
+ case ASCII_CANCEL:
+ case ASCII_SUBSTITUTE:
vc->vc_state = ESnormal;
- return;
- case 27:
+ return true;
+ case ASCII_ESCAPE:
vc->vc_state = ESesc;
- return;
- case 127:
+ return true;
+ case ASCII_DEL:
del(vc);
- return;
- case 128+27:
+ return true;
+ case ASCII_EXT_CSI:
vc->vc_state = ESsquare;
- return;
+ return true;
}
- switch(vc->vc_state) {
- case ESesc:
- vc->vc_state = ESnormal;
- switch (c) {
- case '[':
- vc->vc_state = ESsquare;
- return;
- case ']':
- vc->vc_state = ESnonstd;
- return;
- case '_':
- vc->vc_state = ESapc;
- return;
- case '^':
- vc->vc_state = ESpm;
- return;
- case '%':
- vc->vc_state = ESpercent;
- return;
- case 'E':
- cr(vc);
- lf(vc);
- return;
- case 'M':
- ri(vc);
- return;
- case 'D':
- lf(vc);
- return;
- case 'H':
- if (vc->state.x < VC_TABSTOPS_COUNT)
- set_bit(vc->state.x, vc->vc_tab_stop);
- return;
- case 'P':
- vc->vc_state = ESdcs;
- return;
- case 'Z':
+
+ return false;
+}
+
+/*
+ * Handle a character (@c) following an ESC (when @vc is in the ESesc state).
+ * E.g. previous ESC with @c == '[' here yields the ESsquare state (that is:
+ * CSI).
+ */
+static void handle_esc(struct tty_struct *tty, struct vc_data *vc, u8 c)
+{
+ vc->vc_state = ESnormal;
+ switch (c) {
+ case '[':
+ vc->vc_state = ESsquare;
+ break;
+ case ']':
+ vc->vc_state = ESnonstd;
+ break;
+ case '_':
+ vc->vc_state = ESapc;
+ break;
+ case '^':
+ vc->vc_state = ESpm;
+ break;
+ case '%':
+ vc->vc_state = ESpercent;
+ break;
+ case 'E':
+ cr(vc);
+ lf(vc);
+ break;
+ case 'M':
+ ri(vc);
+ break;
+ case 'D':
+ lf(vc);
+ break;
+ case 'H':
+ if (vc->state.x < VC_TABSTOPS_COUNT)
+ set_bit(vc->state.x, vc->vc_tab_stop);
+ break;
+ case 'P':
+ vc->vc_state = ESdcs;
+ break;
+ case 'Z':
+ respond_ID(tty);
+ break;
+ case '7':
+ save_cur(vc);
+ break;
+ case '8':
+ restore_cur(vc);
+ break;
+ case '(':
+ vc->vc_state = ESsetG0;
+ break;
+ case ')':
+ vc->vc_state = ESsetG1;
+ break;
+ case '#':
+ vc->vc_state = EShash;
+ break;
+ case 'c':
+ reset_terminal(vc, 1);
+ break;
+ case '>': /* Numeric keypad */
+ clr_kbd(vc, kbdapplic);
+ break;
+ case '=': /* Appl. keypad */
+ set_kbd(vc, kbdapplic);
+ break;
+ }
+}
+
+/*
+ * Handle special DEC control sequences ("ESC [ ? parameters char"). Parameters
+ * are in @vc->vc_par and the char is in @c here.
+ */
+static void csi_DEC(struct tty_struct *tty, struct vc_data *vc, u8 c)
+{
+ switch (c) {
+ case 'h':
+ csi_DEC_hl(vc, true);
+ break;
+ case 'l':
+ csi_DEC_hl(vc, false);
+ break;
+ case 'c':
+ if (vc->vc_par[0])
+ vc->vc_cursor_type = CUR_MAKE(vc->vc_par[0],
+ vc->vc_par[1],
+ vc->vc_par[2]);
+ else
+ vc->vc_cursor_type = cur_default;
+ break;
+ case 'm':
+ clear_selection();
+ if (vc->vc_par[0])
+ vc->vc_complement_mask = vc->vc_par[0] << 8 | vc->vc_par[1];
+ else
+ vc->vc_complement_mask = vc->vc_s_complement_mask;
+ break;
+ case 'n':
+ if (vc->vc_par[0] == 5)
+ status_report(tty);
+ else if (vc->vc_par[0] == 6)
+ cursor_report(vc, tty);
+ break;
+ }
+}
+
+/*
+ * Handle Control Sequence Introducer control characters. That is
+ * "ESC [ parameters char". Parameters are in @vc->vc_par and the char is in
+ * @c here.
+ */
+static void csi_ECMA(struct tty_struct *tty, struct vc_data *vc, u8 c)
+{
+ switch (c) {
+ case 'G':
+ case '`':
+ if (vc->vc_par[0])
+ vc->vc_par[0]--;
+ gotoxy(vc, vc->vc_par[0], vc->state.y);
+ break;
+ case 'A':
+ if (!vc->vc_par[0])
+ vc->vc_par[0]++;
+ gotoxy(vc, vc->state.x, vc->state.y - vc->vc_par[0]);
+ break;
+ case 'B':
+ case 'e':
+ if (!vc->vc_par[0])
+ vc->vc_par[0]++;
+ gotoxy(vc, vc->state.x, vc->state.y + vc->vc_par[0]);
+ break;
+ case 'C':
+ case 'a':
+ if (!vc->vc_par[0])
+ vc->vc_par[0]++;
+ gotoxy(vc, vc->state.x + vc->vc_par[0], vc->state.y);
+ break;
+ case 'D':
+ if (!vc->vc_par[0])
+ vc->vc_par[0]++;
+ gotoxy(vc, vc->state.x - vc->vc_par[0], vc->state.y);
+ break;
+ case 'E':
+ if (!vc->vc_par[0])
+ vc->vc_par[0]++;
+ gotoxy(vc, 0, vc->state.y + vc->vc_par[0]);
+ break;
+ case 'F':
+ if (!vc->vc_par[0])
+ vc->vc_par[0]++;
+ gotoxy(vc, 0, vc->state.y - vc->vc_par[0]);
+ break;
+ case 'd':
+ if (vc->vc_par[0])
+ vc->vc_par[0]--;
+ gotoxay(vc, vc->state.x ,vc->vc_par[0]);
+ break;
+ case 'H':
+ case 'f':
+ if (vc->vc_par[0])
+ vc->vc_par[0]--;
+ if (vc->vc_par[1])
+ vc->vc_par[1]--;
+ gotoxay(vc, vc->vc_par[1], vc->vc_par[0]);
+ break;
+ case 'J':
+ csi_J(vc, vc->vc_par[0]);
+ break;
+ case 'K':
+ csi_K(vc);
+ break;
+ case 'L':
+ csi_L(vc);
+ break;
+ case 'M':
+ csi_M(vc);
+ break;
+ case 'P':
+ csi_P(vc);
+ break;
+ case 'c':
+ if (!vc->vc_par[0])
respond_ID(tty);
- return;
- case '7':
- save_cur(vc);
- return;
- case '8':
- restore_cur(vc);
- return;
- case '(':
- vc->vc_state = ESsetG0;
- return;
- case ')':
- vc->vc_state = ESsetG1;
- return;
- case '#':
- vc->vc_state = EShash;
- return;
- case 'c':
- reset_terminal(vc, 1);
- return;
- case '>': /* Numeric keypad */
- clr_kbd(vc, kbdapplic);
- return;
- case '=': /* Appl. keypad */
- set_kbd(vc, kbdapplic);
- return;
+ break;
+ case 'g':
+ if (!vc->vc_par[0] && vc->state.x < VC_TABSTOPS_COUNT)
+ set_bit(vc->state.x, vc->vc_tab_stop);
+ else if (vc->vc_par[0] == 3)
+ bitmap_zero(vc->vc_tab_stop, VC_TABSTOPS_COUNT);
+ break;
+ case 'h':
+ csi_hl(vc, true);
+ break;
+ case 'l':
+ csi_hl(vc, false);
+ break;
+ case 'm':
+ csi_m(vc);
+ break;
+ case 'n':
+ if (vc->vc_par[0] == 5)
+ status_report(tty);
+ else if (vc->vc_par[0] == 6)
+ cursor_report(vc, tty);
+ break;
+ case 'q': /* DECLL - but only 3 leds */
+ /* map 0,1,2,3 to 0,1,2,4 */
+ if (vc->vc_par[0] < 4)
+ vt_set_led_state(vc->vc_num,
+ (vc->vc_par[0] < 3) ? vc->vc_par[0] : 4);
+ break;
+ case 'r':
+ if (!vc->vc_par[0])
+ vc->vc_par[0]++;
+ if (!vc->vc_par[1])
+ vc->vc_par[1] = vc->vc_rows;
+ /* Minimum allowed region is 2 lines */
+ if (vc->vc_par[0] < vc->vc_par[1] &&
+ vc->vc_par[1] <= vc->vc_rows) {
+ vc->vc_top = vc->vc_par[0] - 1;
+ vc->vc_bottom = vc->vc_par[1];
+ gotoxay(vc, 0, 0);
}
+ break;
+ case 's':
+ save_cur(vc);
+ break;
+ case 'u':
+ restore_cur(vc);
+ break;
+ case 'X':
+ csi_X(vc);
+ break;
+ case '@':
+ csi_at(vc, vc->vc_par[0]);
+ break;
+ case ']':
+ csi_RSB(vc);
+ break;
+ }
+
+}
+
+static void vc_reset_params(struct vc_data *vc)
+{
+ memset(vc->vc_par, 0, sizeof(vc->vc_par));
+ vc->vc_npar = 0;
+}
+
+/* console_lock is held */
+static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, u8 c)
+{
+ /*
+ * Control characters can be used in the _middle_
+ * of an escape sequence, aside from ANSI control strings.
+ */
+ if (ansi_control_string(vc->vc_state) && c >= ASCII_IGNORE_FIRST &&
+ c <= ASCII_IGNORE_LAST)
return;
- case ESnonstd:
- if (c=='P') { /* palette escape sequence */
- for (vc->vc_npar = 0; vc->vc_npar < NPAR; vc->vc_npar++)
- vc->vc_par[vc->vc_npar] = 0;
- vc->vc_npar = 0;
+
+ if (handle_ascii(tty, vc, c))
+ return;
+
+ switch(vc->vc_state) {
+ case ESesc: /* ESC */
+ handle_esc(tty, vc, c);
+ return;
+ case ESnonstd: /* ESC ] aka OSC */
+ switch (c) {
+ case 'P': /* palette escape sequence */
+ vc_reset_params(vc);
vc->vc_state = ESpalette;
return;
- } else if (c=='R') { /* reset palette */
+ case 'R': /* reset palette */
reset_palette(vc);
- vc->vc_state = ESnormal;
- } else if (c>='0' && c<='9')
+ break;
+ case '0' ... '9':
vc->vc_state = ESosc;
- else
- vc->vc_state = ESnormal;
+ return;
+ }
+ vc->vc_state = ESnormal;
return;
- case ESpalette:
+ case ESpalette: /* ESC ] P aka OSC P */
if (isxdigit(c)) {
vc->vc_par[vc->vc_npar++] = hex_to_bin(c);
if (vc->vc_npar == 7) {
@@ -2273,16 +2604,14 @@
} else
vc->vc_state = ESnormal;
return;
- case ESsquare:
- for (vc->vc_npar = 0; vc->vc_npar < NPAR; vc->vc_npar++)
- vc->vc_par[vc->vc_npar] = 0;
- vc->vc_npar = 0;
+ case ESsquare: /* ESC [ aka CSI, parameters or modifiers expected */
+ vc_reset_params(vc);
+
vc->vc_state = ESgetpars;
- if (c == '[') { /* Function key */
- vc->vc_state=ESfunckey;
- return;
- }
switch (c) {
+ case '[': /* Function key */
+ vc->vc_state = ESfunckey;
+ return;
case '?':
vc->vc_priv = EPdec;
return;
@@ -2298,182 +2627,44 @@
}
vc->vc_priv = EPecma;
fallthrough;
- case ESgetpars:
- if (c == ';' && vc->vc_npar < NPAR - 1) {
- vc->vc_npar++;
- return;
- } else if (c>='0' && c<='9') {
+ case ESgetpars: /* ESC [ aka CSI, parameters expected */
+ switch (c) {
+ case ';':
+ if (vc->vc_npar < NPAR - 1) {
+ vc->vc_npar++;
+ return;
+ }
+ break;
+ case '0' ... '9':
vc->vc_par[vc->vc_npar] *= 10;
vc->vc_par[vc->vc_npar] += c - '0';
return;
}
- if (c >= 0x20 && c <= 0x3f) { /* 0x2x, 0x3a and 0x3c - 0x3f */
+ if (c >= ASCII_CSI_IGNORE_FIRST && c <= ASCII_CSI_IGNORE_LAST) {
vc->vc_state = EScsiignore;
return;
}
+
+ /* parameters done, handle the control char @c */
+
vc->vc_state = ESnormal;
- switch(c) {
- case 'h':
- if (vc->vc_priv <= EPdec)
- set_mode(vc, 1);
+
+ switch (vc->vc_priv) {
+ case EPdec:
+ csi_DEC(tty, vc, c);
return;
- case 'l':
- if (vc->vc_priv <= EPdec)
- set_mode(vc, 0);
+ case EPecma:
+ csi_ECMA(tty, vc, c);
return;
- case 'c':
- if (vc->vc_priv == EPdec) {
- if (vc->vc_par[0])
- vc->vc_cursor_type =
- CUR_MAKE(vc->vc_par[0],
- vc->vc_par[1],
- vc->vc_par[2]);
- else
- vc->vc_cursor_type = cur_default;
- return;
- }
- break;
- case 'm':
- if (vc->vc_priv == EPdec) {
- clear_selection();
- if (vc->vc_par[0])
- vc->vc_complement_mask = vc->vc_par[0] << 8 | vc->vc_par[1];
- else
- vc->vc_complement_mask = vc->vc_s_complement_mask;
- return;
- }
- break;
- case 'n':
- if (vc->vc_priv == EPecma) {
- if (vc->vc_par[0] == 5)
- status_report(tty);
- else if (vc->vc_par[0] == 6)
- cursor_report(vc, tty);
- }
+ default:
return;
}
- if (vc->vc_priv != EPecma) {
- vc->vc_priv = EPecma;
- return;
- }
- switch(c) {
- case 'G': case '`':
- if (vc->vc_par[0])
- vc->vc_par[0]--;
- gotoxy(vc, vc->vc_par[0], vc->state.y);
- return;
- case 'A':
- if (!vc->vc_par[0])
- vc->vc_par[0]++;
- gotoxy(vc, vc->state.x, vc->state.y - vc->vc_par[0]);
- return;
- case 'B': case 'e':
- if (!vc->vc_par[0])
- vc->vc_par[0]++;
- gotoxy(vc, vc->state.x, vc->state.y + vc->vc_par[0]);
- return;
- case 'C': case 'a':
- if (!vc->vc_par[0])
- vc->vc_par[0]++;
- gotoxy(vc, vc->state.x + vc->vc_par[0], vc->state.y);
- return;
- case 'D':
- if (!vc->vc_par[0])
- vc->vc_par[0]++;
- gotoxy(vc, vc->state.x - vc->vc_par[0], vc->state.y);
- return;
- case 'E':
- if (!vc->vc_par[0])
- vc->vc_par[0]++;
- gotoxy(vc, 0, vc->state.y + vc->vc_par[0]);
- return;
- case 'F':
- if (!vc->vc_par[0])
- vc->vc_par[0]++;
- gotoxy(vc, 0, vc->state.y - vc->vc_par[0]);
- return;
- case 'd':
- if (vc->vc_par[0])
- vc->vc_par[0]--;
- gotoxay(vc, vc->state.x ,vc->vc_par[0]);
- return;
- case 'H': case 'f':
- if (vc->vc_par[0])
- vc->vc_par[0]--;
- if (vc->vc_par[1])
- vc->vc_par[1]--;
- gotoxay(vc, vc->vc_par[1], vc->vc_par[0]);
- return;
- case 'J':
- csi_J(vc, vc->vc_par[0]);
- return;
- case 'K':
- csi_K(vc, vc->vc_par[0]);
- return;
- case 'L':
- csi_L(vc, vc->vc_par[0]);
- return;
- case 'M':
- csi_M(vc, vc->vc_par[0]);
- return;
- case 'P':
- csi_P(vc, vc->vc_par[0]);
- return;
- case 'c':
- if (!vc->vc_par[0])
- respond_ID(tty);
- return;
- case 'g':
- if (!vc->vc_par[0] && vc->state.x < VC_TABSTOPS_COUNT)
- set_bit(vc->state.x, vc->vc_tab_stop);
- else if (vc->vc_par[0] == 3)
- bitmap_zero(vc->vc_tab_stop, VC_TABSTOPS_COUNT);
- return;
- case 'm':
- csi_m(vc);
- return;
- case 'q': /* DECLL - but only 3 leds */
- /* map 0,1,2,3 to 0,1,2,4 */
- if (vc->vc_par[0] < 4)
- vt_set_led_state(vc->vc_num,
- (vc->vc_par[0] < 3) ? vc->vc_par[0] : 4);
- return;
- case 'r':
- if (!vc->vc_par[0])
- vc->vc_par[0]++;
- if (!vc->vc_par[1])
- vc->vc_par[1] = vc->vc_rows;
- /* Minimum allowed region is 2 lines */
- if (vc->vc_par[0] < vc->vc_par[1] &&
- vc->vc_par[1] <= vc->vc_rows) {
- vc->vc_top = vc->vc_par[0] - 1;
- vc->vc_bottom = vc->vc_par[1];
- gotoxay(vc, 0, 0);
- }
- return;
- case 's':
- save_cur(vc);
- return;
- case 'u':
- restore_cur(vc);
- return;
- case 'X':
- csi_X(vc, vc->vc_par[0]);
- return;
- case '@':
- csi_at(vc, vc->vc_par[0]);
- return;
- case ']': /* setterm functions */
- setterm_command(vc);
- return;
- }
- return;
case EScsiignore:
- if (c >= 20 && c <= 0x3f)
+ if (c >= ASCII_CSI_IGNORE_FIRST && c <= ASCII_CSI_IGNORE_LAST)
return;
vc->vc_state = ESnormal;
return;
- case ESpercent:
+ case ESpercent: /* ESC % */
vc->vc_state = ESnormal;
switch (c) {
case '@': /* defined in ISO 2022 */
@@ -2485,36 +2676,36 @@
return;
}
return;
- case ESfunckey:
+ case ESfunckey: /* ESC [ [ aka CSI [ */
vc->vc_state = ESnormal;
return;
- case EShash:
+ case EShash: /* ESC # */
vc->vc_state = ESnormal;
if (c == '8') {
/* DEC screen alignment test. kludge :-) */
vc->vc_video_erase_char =
(vc->vc_video_erase_char & 0xff00) | 'E';
- csi_J(vc, 2);
+ csi_J(vc, CSI_J_VISIBLE);
vc->vc_video_erase_char =
(vc->vc_video_erase_char & 0xff00) | ' ';
do_update_region(vc, vc->vc_origin, vc->vc_screenbuf_size / 2);
}
return;
- case ESsetG0:
+ case ESsetG0: /* ESC ( */
vc_setGx(vc, 0, c);
vc->vc_state = ESnormal;
return;
- case ESsetG1:
+ case ESsetG1: /* ESC ) */
vc_setGx(vc, 1, c);
vc->vc_state = ESnormal;
return;
- case ESapc:
+ case ESapc: /* ESC _ */
return;
- case ESosc:
+ case ESosc: /* ESC ] [0-9] aka OSC [0-9] */
return;
- case ESpm:
+ case ESpm: /* ESC ^ */
return;
- case ESdcs:
+ case ESdcs: /* ESC P */
return;
default:
vc->vc_state = ESnormal;
@@ -2588,33 +2779,39 @@
/**
- * vc_sanitize_unicode - Replace invalid Unicode code points with U+FFFD
- * @c: the received character, or U+FFFD for invalid sequences.
+ * vc_sanitize_unicode - Replace invalid Unicode code points with ``U+FFFD``
+ * @c: the received code point
*/
static inline int vc_sanitize_unicode(const int c)
{
- if ((c >= 0xd800 && c <= 0xdfff) || c == 0xfffe || c == 0xffff)
+ if (c >= 0xd800 && c <= 0xdfff)
return 0xfffd;
return c;
}
/**
- * vc_translate_unicode - Combine UTF-8 into Unicode in @vc_utf_char
+ * vc_translate_unicode - Combine UTF-8 into Unicode in &vc_data.vc_utf_char
* @vc: virtual console
- * @c: character to translate
- * @rescan: we return true if we need more (continuation) data
+ * @c: UTF-8 byte to translate
+ * @rescan: set to true iff @c wasn't consumed here and needs to be re-processed
*
- * @vc_utf_char is the being-constructed unicode character.
- * @vc_utf_count is the number of continuation bytes still expected to arrive.
- * @vc_npar is the number of continuation bytes arrived so far.
+ * * &vc_data.vc_utf_char is the being-constructed Unicode code point.
+ * * &vc_data.vc_utf_count is the number of continuation bytes still expected to
+ * arrive.
+ * * &vc_data.vc_npar is the number of continuation bytes arrived so far.
+ *
+ * Return:
+ * * %-1 - Input OK so far, @c consumed, further bytes expected.
+ * * %0xFFFD - Possibility 1: input invalid, @c may have been consumed (see
+ * desc. of @rescan). Possibility 2: input OK, @c consumed,
+ * ``U+FFFD`` is the resulting code point. ``U+FFFD`` is valid,
+ * ``REPLACEMENT CHARACTER``.
+ * * otherwise - Input OK, @c consumed, resulting code point returned.
*/
static int vc_translate_unicode(struct vc_data *vc, int c, bool *rescan)
{
- static const u32 utf8_length_changes[] = {
- 0x0000007f, 0x000007ff, 0x0000ffff,
- 0x001fffff, 0x03ffffff, 0x7fffffff
- };
+ static const u32 utf8_length_changes[] = {0x7f, 0x7ff, 0xffff, 0x10ffff};
/* Continuation byte received */
if ((c & 0xc0) == 0x80) {
@@ -2660,14 +2857,7 @@
} else if ((c & 0xf8) == 0xf0) {
vc->vc_utf_count = 3;
vc->vc_utf_char = (c & 0x07);
- } else if ((c & 0xfc) == 0xf8) {
- vc->vc_utf_count = 4;
- vc->vc_utf_char = (c & 0x03);
- } else if ((c & 0xfe) == 0xfc) {
- vc->vc_utf_count = 5;
- vc->vc_utf_char = (c & 0x01);
} else {
- /* 254 and 255 are invalid */
return 0xfffd;
}
@@ -2711,9 +2901,13 @@
* as cursor movement) and should not be displayed as a glyph unless
* the disp_ctrl mode is explicitly enabled.
*/
- static const u32 CTRL_ACTION = 0x0d00ff81;
+ static const u32 CTRL_ACTION = BIT(ASCII_NULL) |
+ GENMASK(ASCII_SHIFTIN, ASCII_BELL) | BIT(ASCII_CANCEL) |
+ BIT(ASCII_SUBSTITUTE) | BIT(ASCII_ESCAPE);
/* Cannot be overridden by disp_ctrl */
- static const u32 CTRL_ALWAYS = 0x0800f501;
+ static const u32 CTRL_ALWAYS = BIT(ASCII_NULL) | BIT(ASCII_BACKSPACE) |
+ BIT(ASCII_LINEFEED) | BIT(ASCII_SHIFTIN) | BIT(ASCII_SHIFTOUT) |
+ BIT(ASCII_CAR_RET) | BIT(ASCII_FORMFEED) | BIT(ASCII_ESCAPE);
if (vc->vc_state != ESnormal)
return true;
@@ -2730,17 +2924,17 @@
* useless without them; to display an arbitrary font position use the
* direct-to-font zone in UTF-8 mode.
*/
- if (c < 32) {
+ if (c < BITS_PER_TYPE(CTRL_ALWAYS)) {
if (vc->vc_disp_ctrl)
return CTRL_ALWAYS & BIT(c);
else
return vc->vc_utf || (CTRL_ACTION & BIT(c));
}
- if (c == 127 && !vc->vc_disp_ctrl)
+ if (c == ASCII_DEL && !vc->vc_disp_ctrl)
return true;
- if (c == 128 + 27)
+ if (c == ASCII_EXT_CSI)
return true;
return false;
@@ -2852,7 +3046,7 @@
};
int c, tc, n = 0;
unsigned int currcons;
- struct vc_data *vc;
+ struct vc_data *vc = tty->driver_data;
struct vt_notifier_param param;
bool rescan;
@@ -2860,13 +3054,6 @@
return count;
console_lock();
- vc = tty->driver_data;
- if (vc == NULL) {
- pr_err("vt: argh, driver_data is NULL !\n");
- console_unlock();
- return 0;
- }
-
currcons = vc->vc_num;
if (!vc_cons_allocated(currcons)) {
/* could this happen? */
@@ -2883,7 +3070,7 @@
param.vc = vc;
while (!tty->flow.stopped && count) {
- int orig = *buf;
+ u8 orig = *buf;
buf++;
n++;
count--;
@@ -2992,16 +3179,16 @@
#ifdef CONFIG_VT_CONSOLE
/**
- * vt_kmsg_redirect() - Sets/gets the kernel message console
- * @new: The new virtual terminal number or -1 if the console should stay
- * unchanged
+ * vt_kmsg_redirect() - sets/gets the kernel message console
+ * @new: the new virtual terminal number or -1 if the console should stay
+ * unchanged
*
* By default, the kernel messages are always printed on the current virtual
* console. However, the user may modify that default with the
- * TIOCL_SETKMSGREDIRECT ioctl call.
+ * %TIOCL_SETKMSGREDIRECT ioctl call.
*
* This function sets the kernel message console to be @new. It returns the old
- * virtual console number. The virtual terminal number 0 (both as parameter and
+ * virtual console number. The virtual terminal number %0 (both as parameter and
* return value) means no redirection (i.e. always printed on the currently
* active console).
*
@@ -3009,8 +3196,8 @@
* value is not modified. You may use the macro vt_get_kmsg_redirect() in that
* case to make the code more understandable.
*
- * When the kernel is compiled without CONFIG_VT_CONSOLE, this function ignores
- * the parameter and always returns 0.
+ * When the kernel is compiled without %CONFIG_VT_CONSOLE, this function ignores
+ * the parameter and always returns %0.
*/
int vt_kmsg_redirect(int new)
{
@@ -3065,22 +3252,23 @@
cnt = 0;
while (count--) {
c = *b++;
- if (c == 10 || c == 13 || c == 8 || vc->vc_need_wrap) {
+ if (c == ASCII_LINEFEED || c == ASCII_CAR_RET ||
+ c == ASCII_BACKSPACE || vc->vc_need_wrap) {
if (cnt && con_is_visible(vc))
vc->vc_sw->con_putcs(vc, start, cnt, vc->state.y, start_x);
cnt = 0;
- if (c == 8) { /* backspace */
+ if (c == ASCII_BACKSPACE) {
bs(vc);
start = (ushort *)vc->vc_pos;
start_x = vc->state.x;
continue;
}
- if (c != 13)
+ if (c != ASCII_CAR_RET)
lf(vc);
cr(vc);
start = (ushort *)vc->vc_pos;
start_x = vc->state.x;
- if (c == 10 || c == 13)
+ if (c == ASCII_LINEFEED || c == ASCII_CAR_RET)
continue;
}
vc_uniscr_putc(vc, c);
@@ -3144,6 +3332,8 @@
{
char type, data;
char __user *p = (char __user *)arg;
+ void __user *param_aligned32 = (u32 __user *)arg + 1;
+ void __user *param = (void __user *)arg + 1;
int lines;
int ret;
@@ -3157,8 +3347,7 @@
case TIOCL_SETSEL:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- return set_selection_user((struct tiocl_selection
- __user *)(p+1), tty);
+ return set_selection_user(param, tty);
case TIOCL_PASTESEL:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
@@ -3171,10 +3360,7 @@
case TIOCL_SELLOADLUT:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- console_lock();
- ret = sel_loadlut(p);
- console_unlock();
- break;
+ return sel_loadlut(param_aligned32);
case TIOCL_GETSHIFTSTATE:
/*
* Make it possible to react to Shift+Mousebutton. Note that
@@ -3190,10 +3376,7 @@
console_unlock();
return put_user(data, p);
case TIOCL_SETVESABLANK:
- console_lock();
- ret = set_vesa_blanking(p);
- console_unlock();
- break;
+ return set_vesa_blanking(param);
case TIOCL_GETKMSGREDIRECT:
data = vt_get_kmsg_redirect();
return put_user(data, p);
@@ -3214,7 +3397,7 @@
*/
return fg_console;
case TIOCL_SCROLLCONSOLE:
- if (get_user(lines, (s32 __user *)(p+4)))
+ if (get_user(lines, (s32 __user *)param_aligned32))
return -EFAULT;
/*
@@ -3312,16 +3495,13 @@
static void con_flush_chars(struct tty_struct *tty)
{
- struct vc_data *vc;
+ struct vc_data *vc = tty->driver_data;
if (in_interrupt()) /* from flush_to_ldisc */
return;
- /* if we race with con_close(), vt may be null */
console_lock();
- vc = tty->driver_data;
- if (vc)
- set_cursor(vc);
+ set_cursor(vc);
console_unlock();
}
@@ -3471,7 +3651,7 @@
vc_cons[currcons].d = vc = kzalloc(sizeof(struct vc_data), GFP_NOWAIT);
INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
tty_port_init(&vc->port);
- visual_init(vc, currcons, 1);
+ visual_init(vc, currcons, true);
/* Assuming vc->vc_{cols,rows,screenbuf_size} are sane here. */
vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT);
vc_init(vc, currcons || !vc->vc_sw->con_save_screen);
@@ -3481,7 +3661,7 @@
set_origin(vc);
save_screen(vc);
gotoxy(vc, vc->state.x, vc->state.y);
- csi_J(vc, 0);
+ csi_J(vc, CSI_J_CURSOR_TO_END);
update_screen(vc);
pr_info("Console: %s %s %dx%d\n",
vc->vc_can_do_color ? "colour" : "mono",
@@ -3640,7 +3820,7 @@
old_was_color = vc->vc_can_do_color;
vc->vc_sw->con_deinit(vc);
vc->vc_origin = (unsigned long)vc->vc_screenbuf;
- visual_init(vc, i, 0);
+ visual_init(vc, i, false);
set_origin(vc);
update_attr(vc);
@@ -3930,7 +4110,7 @@
* RETURNS: zero if unbound, nonzero if bound
*
* Drivers can call this and if zero, they should release
- * all resources allocated on con_startup()
+ * all resources allocated on &consw.con_startup()
*/
int con_is_bound(const struct consw *csw)
{
@@ -3970,15 +4150,9 @@
* Called when the console is taken over by the kernel debugger, this
* function needs to save the current console state, then put the console
* into a state suitable for the kernel debugger.
- *
- * RETURNS:
- * Zero on success, nonzero if a failure occurred when trying to prepare
- * the console for the debugger.
*/
-int con_debug_enter(struct vc_data *vc)
+void con_debug_enter(struct vc_data *vc)
{
- int ret = 0;
-
saved_fg_console = fg_console;
saved_last_console = last_console;
saved_want_console = want_console;
@@ -3987,7 +4161,7 @@
vc->vc_mode = KD_TEXT;
console_blanked = 0;
if (vc->vc_sw->con_debug_enter)
- ret = vc->vc_sw->con_debug_enter(vc);
+ vc->vc_sw->con_debug_enter(vc);
#ifdef CONFIG_KGDB_KDB
/* Set the initial LINES variable if it is not already set */
if (vc->vc_rows < 999) {
@@ -4017,7 +4191,6 @@
}
}
#endif /* CONFIG_KGDB_KDB */
- return ret;
}
EXPORT_SYMBOL_GPL(con_debug_enter);
@@ -4026,15 +4199,10 @@
*
* Restore the console state to what it was before the kernel debugger
* was invoked.
- *
- * RETURNS:
- * Zero on success, nonzero if a failure occurred when trying to restore
- * the console.
*/
-int con_debug_leave(void)
+void con_debug_leave(void)
{
struct vc_data *vc;
- int ret = 0;
fg_console = saved_fg_console;
last_console = saved_last_console;
@@ -4044,8 +4212,7 @@
vc = vc_cons[fg_console].d;
if (vc->vc_sw->con_debug_leave)
- ret = vc->vc_sw->con_debug_leave(vc);
- return ret;
+ vc->vc_sw->con_debug_leave(vc);
}
EXPORT_SYMBOL_GPL(con_debug_leave);
@@ -4275,14 +4442,17 @@
* Screen blanking
*/
-static int set_vesa_blanking(char __user *p)
+static int set_vesa_blanking(u8 __user *mode_user)
{
- unsigned int mode;
+ u8 mode;
- if (get_user(mode, p + 1))
+ if (get_user(mode, mode_user))
return -EFAULT;
- vesa_blank_mode = (mode < 4) ? mode : 0;
+ console_lock();
+ vesa_blank_mode = (mode <= VESA_BLANK_MAX) ? mode : VESA_NO_BLANKING;
+ console_unlock();
+
return 0;
}
@@ -4307,7 +4477,7 @@
if (entering_gfx) {
hide_cursor(vc);
save_screen(vc);
- vc->vc_sw->con_blank(vc, -1, 1);
+ vc->vc_sw->con_blank(vc, VESA_VSYNC_SUSPEND, 1);
console_blanked = fg_console + 1;
blank_state = blank_off;
set_origin(vc);
@@ -4328,7 +4498,8 @@
save_screen(vc);
/* In case we need to reset origin, blanking hook returns 1 */
- i = vc->vc_sw->con_blank(vc, vesa_off_interval ? 1 : (vesa_blank_mode + 1), 0);
+ i = vc->vc_sw->con_blank(vc, vesa_off_interval ? VESA_VSYNC_SUSPEND :
+ (vesa_blank_mode + 1), 0);
console_blanked = fg_console + 1;
if (i)
set_origin(vc);
@@ -4379,7 +4550,7 @@
}
console_blanked = 0;
- if (vc->vc_sw->con_blank(vc, 0, leaving_gfx))
+ if (vc->vc_sw->con_blank(vc, VESA_NO_BLANKING, leaving_gfx))
/* Low-level driver cannot restore -> do it ourselves */
update_screen(vc);
if (console_blank_hook)
@@ -4584,7 +4755,7 @@
return rc;
}
-static int con_font_set(struct vc_data *vc, struct console_font_op *op)
+static int con_font_set(struct vc_data *vc, const struct console_font_op *op)
{
struct console_font font;
int rc = -EINVAL;
@@ -4748,43 +4919,3 @@
{
notify_update(vc);
}
-
-void vc_scrolldelta_helper(struct vc_data *c, int lines,
- unsigned int rolled_over, void *base, unsigned int size)
-{
- unsigned long ubase = (unsigned long)base;
- ptrdiff_t scr_end = (void *)c->vc_scr_end - base;
- ptrdiff_t vorigin = (void *)c->vc_visible_origin - base;
- ptrdiff_t origin = (void *)c->vc_origin - base;
- int margin = c->vc_size_row * 4;
- int from, wrap, from_off, avail;
-
- /* Turn scrollback off */
- if (!lines) {
- c->vc_visible_origin = c->vc_origin;
- return;
- }
-
- /* Do we have already enough to allow jumping from 0 to the end? */
- if (rolled_over > scr_end + margin) {
- from = scr_end;
- wrap = rolled_over + c->vc_size_row;
- } else {
- from = 0;
- wrap = size;
- }
-
- from_off = (vorigin - from + wrap) % wrap + lines * c->vc_size_row;
- avail = (origin - from + wrap) % wrap;
-
- /* Only a little piece would be left? Show all incl. the piece! */
- if (avail < 2 * margin)
- margin = 0;
- if (from_off < margin)
- from_off = 0;
- if (from_off > avail - margin)
- from_off = avail;
-
- c->vc_visible_origin = ubase + (from + from_off) % wrap;
-}
-EXPORT_SYMBOL_GPL(vc_scrolldelta_helper);
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 8c685b5..4b91072 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -714,8 +714,7 @@
vcp->vc_scan_lines = v.v_vlin;
if (v.v_clin)
vcp->vc_cell_height = v.v_clin;
- vcp->vc_resize_user = 1;
- ret = vc_resize(vcp, v.v_cols, v.v_rows);
+ ret = __vc_resize(vcp, v.v_cols, v.v_rows, true);
if (ret) {
vcp->vc_scan_lines = save_scan_lines;
vcp->vc_cell_height = save_cell_height;
@@ -923,9 +922,8 @@
vc = vc_cons[i].d;
if (vc) {
- vc->vc_resize_user = 1;
/* FIXME: review v tty lock */
- vc_resize(vc_cons[i].d, cc, ll);
+ __vc_resize(vc_cons[i].d, cc, ll, true);
}
}
console_unlock();
diff --git a/drivers/video/console/dummycon.c b/drivers/video/console/dummycon.c
index 14af5d9..1390493 100644
--- a/drivers/video/console/dummycon.c
+++ b/drivers/video/console/dummycon.c
@@ -50,7 +50,8 @@
raw_notifier_chain_unregister(&dummycon_output_nh, nb);
}
-static void dummycon_putc(struct vc_data *vc, int c, int ypos, int xpos)
+static void dummycon_putc(struct vc_data *vc, u16 c, unsigned int y,
+ unsigned int x)
{
WARN_CONSOLE_UNLOCKED();
@@ -58,10 +59,10 @@
raw_notifier_call_chain(&dummycon_output_nh, 0, NULL);
}
-static void dummycon_putcs(struct vc_data *vc, const unsigned short *s,
- int count, int ypos, int xpos)
+static void dummycon_putcs(struct vc_data *vc, const u16 *s, unsigned int count,
+ unsigned int ypos, unsigned int xpos)
{
- int i;
+ unsigned int i;
if (!dummycon_putc_called) {
/* Ignore erases */
@@ -78,18 +79,21 @@
raw_notifier_call_chain(&dummycon_output_nh, 0, NULL);
}
-static int dummycon_blank(struct vc_data *vc, int blank, int mode_switch)
+static bool dummycon_blank(struct vc_data *vc, enum vesa_blank_mode blank,
+ bool mode_switch)
{
/* Redraw, so that we get putc(s) for output done while blanked */
- return 1;
+ return true;
}
#else
-static void dummycon_putc(struct vc_data *vc, int c, int ypos, int xpos) { }
-static void dummycon_putcs(struct vc_data *vc, const unsigned short *s,
- int count, int ypos, int xpos) { }
-static int dummycon_blank(struct vc_data *vc, int blank, int mode_switch)
+static void dummycon_putc(struct vc_data *vc, u16 c, unsigned int y,
+ unsigned int x) { }
+static void dummycon_putcs(struct vc_data *vc, const u16 *s, unsigned int count,
+ unsigned int ypos, unsigned int xpos) { }
+static bool dummycon_blank(struct vc_data *vc, enum vesa_blank_mode blank,
+ bool mode_switch)
{
- return 0;
+ return false;
}
#endif
@@ -98,7 +102,7 @@
return "dummy device";
}
-static void dummycon_init(struct vc_data *vc, int init)
+static void dummycon_init(struct vc_data *vc, bool init)
{
vc->vc_can_do_color = 1;
if (init) {
@@ -109,9 +113,9 @@
}
static void dummycon_deinit(struct vc_data *vc) { }
-static void dummycon_clear(struct vc_data *vc, int sy, int sx, int height,
- int width) { }
-static void dummycon_cursor(struct vc_data *vc, int mode) { }
+static void dummycon_clear(struct vc_data *vc, unsigned int sy, unsigned int sx,
+ unsigned int width) { }
+static void dummycon_cursor(struct vc_data *vc, bool enable) { }
static bool dummycon_scroll(struct vc_data *vc, unsigned int top,
unsigned int bottom, enum con_scroll dir,
@@ -120,9 +124,9 @@
return false;
}
-static int dummycon_switch(struct vc_data *vc)
+static bool dummycon_switch(struct vc_data *vc)
{
- return 0;
+ return false;
}
/*
diff --git a/drivers/video/console/mdacon.c b/drivers/video/console/mdacon.c
index ef29b32..c0e1f45 100644
--- a/drivers/video/console/mdacon.c
+++ b/drivers/video/console/mdacon.c
@@ -352,7 +352,7 @@
return "MDA-2";
}
-static void mdacon_init(struct vc_data *c, int init)
+static void mdacon_init(struct vc_data *c, bool init)
{
c->vc_complement_mask = 0x0800; /* reverse video */
c->vc_display_fg = &mda_display_fg;
@@ -427,13 +427,8 @@
return mda_vram_base + y * mda_num_columns + x;
}
-static void mdacon_putc(struct vc_data *c, int ch, int y, int x)
-{
- scr_writew(mda_convert_attr(ch), mda_addr(x, y));
-}
-
-static void mdacon_putcs(struct vc_data *c, const unsigned short *s,
- int count, int y, int x)
+static void mdacon_putcs(struct vc_data *c, const u16 *s, unsigned int count,
+ unsigned int y, unsigned int x)
{
u16 *dest = mda_addr(x, y);
@@ -442,29 +437,22 @@
}
}
-static void mdacon_clear(struct vc_data *c, int y, int x,
- int height, int width)
+static void mdacon_clear(struct vc_data *c, unsigned int y, unsigned int x,
+ unsigned int width)
{
u16 *dest = mda_addr(x, y);
u16 eattr = mda_convert_attr(c->vc_video_erase_char);
- if (width <= 0 || height <= 0)
- return;
-
- if (x==0 && width==mda_num_columns) {
- scr_memsetw(dest, eattr, height*width*2);
- } else {
- for (; height > 0; height--, dest+=mda_num_columns)
- scr_memsetw(dest, eattr, width*2);
- }
+ scr_memsetw(dest, eattr, width * 2);
}
-
-static int mdacon_switch(struct vc_data *c)
+
+static bool mdacon_switch(struct vc_data *c)
{
- return 1; /* redrawing needed */
+ return true; /* redrawing needed */
}
-static int mdacon_blank(struct vc_data *c, int blank, int mode_switch)
+static bool mdacon_blank(struct vc_data *c, enum vesa_blank_mode blank,
+ bool mode_switch)
{
if (mda_type == TYPE_MDA) {
if (blank)
@@ -472,20 +460,20 @@
mda_convert_attr(c->vc_video_erase_char),
c->vc_screenbuf_size);
/* Tell console.c that it has to restore the screen itself */
- return 1;
+ return true;
} else {
if (blank)
outb_p(0x00, mda_mode_port); /* disable video */
else
outb_p(MDA_MODE_VIDEO_EN | MDA_MODE_BLINK_EN,
mda_mode_port);
- return 0;
+ return false;
}
}
-static void mdacon_cursor(struct vc_data *c, int mode)
+static void mdacon_cursor(struct vc_data *c, bool enable)
{
- if (mode == CM_ERASE) {
+ if (!enable) {
mda_set_cursor(mda_vram_len - 1);
return;
}
@@ -544,7 +532,6 @@
.con_init = mdacon_init,
.con_deinit = mdacon_deinit,
.con_clear = mdacon_clear,
- .con_putc = mdacon_putc,
.con_putcs = mdacon_putcs,
.con_cursor = mdacon_cursor,
.con_scroll = mdacon_scroll,
diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c
index e8e4f82..a51cfc1 100644
--- a/drivers/video/console/newport_con.c
+++ b/drivers/video/console/newport_con.c
@@ -324,7 +324,7 @@
return NULL;
}
-static void newport_init(struct vc_data *vc, int init)
+static void newport_init(struct vc_data *vc, bool init)
{
int cols, rows;
@@ -346,12 +346,12 @@
}
}
-static void newport_clear(struct vc_data *vc, int sy, int sx, int height,
- int width)
+static void newport_clear(struct vc_data *vc, unsigned int sy, unsigned int sx,
+ unsigned int width)
{
int xend = ((sx + width) << 3) - 1;
int ystart = ((sy << 4) + topscan) & 0x3ff;
- int yend = (((sy + height) << 4) + topscan - 1) & 0x3ff;
+ int yend = (((sy + 1) << 4) + topscan - 1) & 0x3ff;
if (logo_active)
return;
@@ -367,8 +367,8 @@
}
}
-static void newport_putc(struct vc_data *vc, int charattr, int ypos,
- int xpos)
+static void newport_putc(struct vc_data *vc, u16 charattr, unsigned int ypos,
+ unsigned int xpos)
{
unsigned char *p;
@@ -396,12 +396,13 @@
RENDER(npregs, p);
}
-static void newport_putcs(struct vc_data *vc, const unsigned short *s,
- int count, int ypos, int xpos)
+static void newport_putcs(struct vc_data *vc, const u16 *s,
+ unsigned int count, unsigned int ypos,
+ unsigned int xpos)
{
- int i;
- int charattr;
unsigned char *p;
+ unsigned int i;
+ u16 charattr;
charattr = (scr_readw(s) >> 8) & 0xff;
@@ -437,32 +438,28 @@
}
}
-static void newport_cursor(struct vc_data *vc, int mode)
+static void newport_cursor(struct vc_data *vc, bool enable)
{
unsigned short treg;
int xcurs, ycurs;
- switch (mode) {
- case CM_ERASE:
- treg = newport_vc2_get(npregs, VC2_IREG_CONTROL);
+ treg = newport_vc2_get(npregs, VC2_IREG_CONTROL);
+
+ if (!enable) {
newport_vc2_set(npregs, VC2_IREG_CONTROL,
(treg & ~(VC2_CTRL_ECDISP)));
- break;
-
- case CM_MOVE:
- case CM_DRAW:
- treg = newport_vc2_get(npregs, VC2_IREG_CONTROL);
- newport_vc2_set(npregs, VC2_IREG_CONTROL,
- (treg | VC2_CTRL_ECDISP));
- xcurs = (vc->vc_pos - vc->vc_visible_origin) / 2;
- ycurs = ((xcurs / vc->vc_cols) << 4) + 31;
- xcurs = ((xcurs % vc->vc_cols) << 3) + xcurs_correction;
- newport_vc2_set(npregs, VC2_IREG_CURSX, xcurs);
- newport_vc2_set(npregs, VC2_IREG_CURSY, ycurs);
+ return;
}
+
+ newport_vc2_set(npregs, VC2_IREG_CONTROL, (treg | VC2_CTRL_ECDISP));
+ xcurs = (vc->vc_pos - vc->vc_visible_origin) / 2;
+ ycurs = ((xcurs / vc->vc_cols) << 4) + 31;
+ xcurs = ((xcurs % vc->vc_cols) << 3) + xcurs_correction;
+ newport_vc2_set(npregs, VC2_IREG_CURSX, xcurs);
+ newport_vc2_set(npregs, VC2_IREG_CURSY, ycurs);
}
-static int newport_switch(struct vc_data *vc)
+static bool newport_switch(struct vc_data *vc)
{
static int logo_drawn = 0;
@@ -476,14 +473,15 @@
}
}
- return 1;
+ return true;
}
-static int newport_blank(struct vc_data *c, int blank, int mode_switch)
+static bool newport_blank(struct vc_data *c, enum vesa_blank_mode blank,
+ bool mode_switch)
{
unsigned short treg;
- if (blank == 0) {
+ if (blank == VESA_NO_BLANKING) {
/* unblank console */
treg = newport_vc2_get(npregs, VC2_IREG_CONTROL);
newport_vc2_set(npregs, VC2_IREG_CONTROL,
@@ -494,10 +492,12 @@
newport_vc2_set(npregs, VC2_IREG_CONTROL,
(treg & ~(VC2_CTRL_EDISP)));
}
- return 1;
+
+ return true;
}
-static int newport_set_font(int unit, struct console_font *op, unsigned int vpitch)
+static int newport_set_font(int unit, const struct console_font *op,
+ unsigned int vpitch)
{
int w = op->width;
int h = op->height;
@@ -564,12 +564,13 @@
return 0;
}
-static int newport_font_default(struct vc_data *vc, struct console_font *op, char *name)
+static int newport_font_default(struct vc_data *vc, struct console_font *op,
+ const char *name)
{
return newport_set_def_font(vc->vc_num, op);
}
-static int newport_font_set(struct vc_data *vc, struct console_font *font,
+static int newport_font_set(struct vc_data *vc, const struct console_font *font,
unsigned int vpitch, unsigned int flags)
{
return newport_set_font(vc->vc_num, font, vpitch);
diff --git a/drivers/video/console/sticon.c b/drivers/video/console/sticon.c
index 992a4fa..4c7b495 100644
--- a/drivers/video/console/sticon.c
+++ b/drivers/video/console/sticon.c
@@ -71,19 +71,8 @@
return "STI console";
}
-static void sticon_putc(struct vc_data *conp, int c, int ypos, int xpos)
-{
- if (vga_is_gfx || console_blanked)
- return;
-
- if (conp->vc_mode != KD_TEXT)
- return;
-
- sti_putc(sticon_sti, c, ypos, xpos, font_data[conp->vc_num]);
-}
-
-static void sticon_putcs(struct vc_data *conp, const unsigned short *s,
- int count, int ypos, int xpos)
+static void sticon_putcs(struct vc_data *conp, const u16 *s, unsigned int count,
+ unsigned int ypos, unsigned int xpos)
{
if (vga_is_gfx || console_blanked)
return;
@@ -97,7 +86,7 @@
}
}
-static void sticon_cursor(struct vc_data *conp, int mode)
+static void sticon_cursor(struct vc_data *conp, bool enable)
{
unsigned short car1;
@@ -106,23 +95,20 @@
return;
car1 = conp->vc_screenbuf[conp->state.x + conp->state.y * conp->vc_cols];
- switch (mode) {
- case CM_ERASE:
+ if (!enable) {
sti_putc(sticon_sti, car1, conp->state.y, conp->state.x,
font_data[conp->vc_num]);
- break;
- case CM_MOVE:
- case CM_DRAW:
- switch (CUR_SIZE(conp->vc_cursor_type)) {
- case CUR_UNDERLINE:
- case CUR_LOWER_THIRD:
- case CUR_LOWER_HALF:
- case CUR_TWO_THIRDS:
- case CUR_BLOCK:
- sti_putc(sticon_sti, (car1 & 255) + (0 << 8) + (7 << 11),
- conp->state.y, conp->state.x, font_data[conp->vc_num]);
- break;
- }
+ return;
+ }
+
+ switch (CUR_SIZE(conp->vc_cursor_type)) {
+ case CUR_UNDERLINE:
+ case CUR_LOWER_THIRD:
+ case CUR_LOWER_HALF:
+ case CUR_TWO_THIRDS:
+ case CUR_BLOCK:
+ sti_putc(sticon_sti, (car1 & 255) + (0 << 8) + (7 << 11),
+ conp->state.y, conp->state.x, font_data[conp->vc_num]);
break;
}
}
@@ -135,7 +121,7 @@
if (vga_is_gfx)
return false;
- sticon_cursor(conp, CM_ERASE);
+ sticon_cursor(conp, false);
switch (dir) {
case SM_UP:
@@ -167,7 +153,7 @@
}
}
-static int sticon_set_font(struct vc_data *vc, struct console_font *op,
+static int sticon_set_font(struct vc_data *vc, const struct console_font *op,
unsigned int vpitch)
{
struct sti_struct *sti = sticon_sti;
@@ -260,20 +246,21 @@
return 0;
}
-static int sticon_font_default(struct vc_data *vc, struct console_font *op, char *name)
+static int sticon_font_default(struct vc_data *vc, struct console_font *op,
+ const char *name)
{
sticon_set_def_font(vc->vc_num);
return 0;
}
-static int sticon_font_set(struct vc_data *vc, struct console_font *font,
+static int sticon_font_set(struct vc_data *vc, const struct console_font *font,
unsigned int vpitch, unsigned int flags)
{
return sticon_set_font(vc, font, vpitch);
}
-static void sticon_init(struct vc_data *c, int init)
+static void sticon_init(struct vc_data *c, bool init)
{
struct sti_struct *sti = sticon_sti;
int vc_cols, vc_rows;
@@ -300,33 +287,32 @@
sticon_set_def_font(i);
}
-static void sticon_clear(struct vc_data *conp, int sy, int sx, int height,
- int width)
+static void sticon_clear(struct vc_data *conp, unsigned int sy, unsigned int sx,
+ unsigned int width)
{
- if (!height || !width)
- return;
-
- sti_clear(sticon_sti, sy, sx, height, width,
+ sti_clear(sticon_sti, sy, sx, 1, width,
conp->vc_video_erase_char, font_data[conp->vc_num]);
}
-static int sticon_switch(struct vc_data *conp)
+static bool sticon_switch(struct vc_data *conp)
{
- return 1; /* needs refreshing */
+ return true; /* needs refreshing */
}
-static int sticon_blank(struct vc_data *c, int blank, int mode_switch)
+static bool sticon_blank(struct vc_data *c, enum vesa_blank_mode blank,
+ bool mode_switch)
{
- if (blank == 0) {
+ if (blank == VESA_NO_BLANKING) {
if (mode_switch)
vga_is_gfx = 0;
- return 1;
+ return true;
}
sti_clear(sticon_sti, 0, 0, c->vc_rows, c->vc_cols, BLANK,
font_data[c->vc_num]);
if (mode_switch)
vga_is_gfx = 1;
- return 1;
+
+ return true;
}
static u8 sticon_build_attr(struct vc_data *conp, u8 color,
@@ -365,7 +351,6 @@
.con_init = sticon_init,
.con_deinit = sticon_deinit,
.con_clear = sticon_clear,
- .con_putc = sticon_putc,
.con_putcs = sticon_putcs,
.con_cursor = sticon_cursor,
.con_scroll = sticon_scroll,
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 8ef1579..7597f04b 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -65,7 +65,7 @@
* Interface used by the world
*/
-static int vgacon_set_origin(struct vc_data *c);
+static bool vgacon_set_origin(struct vc_data *c);
static struct uni_pagedict *vgacon_uni_pagedir;
static int vgacon_refcount;
@@ -81,7 +81,7 @@
static bool vga_can_do_color; /* Do we support colors? */
static unsigned int vga_default_font_height __read_mostly; /* Height of default screen font */
static unsigned char vga_video_type __read_mostly; /* Card type */
-static int vga_vesa_blanked;
+static enum vesa_blank_mode vga_vesa_blanked;
static bool vga_palette_blanked;
static bool vga_is_gfx;
static bool vga_512_chars;
@@ -138,8 +138,40 @@
static void vgacon_scrolldelta(struct vc_data *c, int lines)
{
- vc_scrolldelta_helper(c, lines, vga_rolled_over, (void *)vga_vram_base,
- vga_vram_size);
+ unsigned long scr_end = c->vc_scr_end - vga_vram_base;
+ unsigned long vorigin = c->vc_visible_origin - vga_vram_base;
+ unsigned long origin = c->vc_origin - vga_vram_base;
+ int margin = c->vc_size_row * 4;
+ int from, wrap, from_off, avail;
+
+ /* Turn scrollback off */
+ if (!lines) {
+ c->vc_visible_origin = c->vc_origin;
+ return;
+ }
+
+ /* Do we have already enough to allow jumping from 0 to the end? */
+ if (vga_rolled_over > scr_end + margin) {
+ from = scr_end;
+ wrap = vga_rolled_over + c->vc_size_row;
+ } else {
+ from = 0;
+ wrap = vga_vram_size;
+ }
+
+ from_off = (vorigin - from + wrap) % wrap + lines * c->vc_size_row;
+ avail = (origin - from + wrap) % wrap;
+
+ /* Only a little piece would be left? Show all incl. the piece! */
+ if (avail < 2 * margin)
+ margin = 0;
+ if (from_off < margin)
+ from_off = 0;
+ if (from_off > avail - margin)
+ from_off = avail;
+
+ c->vc_visible_origin = vga_vram_base + (from + from_off) % wrap;
+
vga_set_mem_top(c);
}
@@ -335,7 +367,7 @@
return display_desc;
}
-static void vgacon_init(struct vc_data *c, int init)
+static void vgacon_init(struct vc_data *c, bool init)
{
struct uni_pagedict *p;
@@ -352,7 +384,7 @@
c->vc_scan_lines = vga_scan_lines;
c->vc_font.height = c->vc_cell_height = vga_video_font_height;
- /* set dimensions manually if init != 0 since vc_resize() will fail */
+ /* set dimensions manually if init is true since vc_resize() will fail */
if (init) {
c->vc_cols = vga_video_num_columns;
c->vc_rows = vga_video_num_lines;
@@ -471,7 +503,7 @@
raw_spin_unlock_irqrestore(&vga_lock, flags);
}
-static void vgacon_cursor(struct vc_data *c, int mode)
+static void vgacon_cursor(struct vc_data *c, bool enable)
{
unsigned int c_height;
@@ -482,47 +514,41 @@
c_height = c->vc_cell_height;
- switch (mode) {
- case CM_ERASE:
- write_vga(14, (c->vc_pos - vga_vram_base) / 2);
+ write_vga(14, (c->vc_pos - vga_vram_base) / 2);
+
+ if (!enable) {
if (vga_video_type >= VIDEO_TYPE_VGAC)
vgacon_set_cursor_size(31, 30);
else
vgacon_set_cursor_size(31, 31);
- break;
+ return;
+ }
- case CM_MOVE:
- case CM_DRAW:
- write_vga(14, (c->vc_pos - vga_vram_base) / 2);
- switch (CUR_SIZE(c->vc_cursor_type)) {
- case CUR_UNDERLINE:
- vgacon_set_cursor_size(c_height -
- (c_height < 10 ? 2 : 3),
- c_height -
- (c_height < 10 ? 1 : 2));
- break;
- case CUR_TWO_THIRDS:
- vgacon_set_cursor_size(c_height / 3, c_height -
- (c_height < 10 ? 1 : 2));
- break;
- case CUR_LOWER_THIRD:
- vgacon_set_cursor_size(c_height * 2 / 3, c_height -
- (c_height < 10 ? 1 : 2));
- break;
- case CUR_LOWER_HALF:
- vgacon_set_cursor_size(c_height / 2, c_height -
- (c_height < 10 ? 1 : 2));
- break;
- case CUR_NONE:
- if (vga_video_type >= VIDEO_TYPE_VGAC)
- vgacon_set_cursor_size(31, 30);
- else
- vgacon_set_cursor_size(31, 31);
- break;
- default:
- vgacon_set_cursor_size(1, c_height);
- break;
- }
+ switch (CUR_SIZE(c->vc_cursor_type)) {
+ case CUR_UNDERLINE:
+ vgacon_set_cursor_size(c_height - (c_height < 10 ? 2 : 3),
+ c_height - (c_height < 10 ? 1 : 2));
+ break;
+ case CUR_TWO_THIRDS:
+ vgacon_set_cursor_size(c_height / 3,
+ c_height - (c_height < 10 ? 1 : 2));
+ break;
+ case CUR_LOWER_THIRD:
+ vgacon_set_cursor_size(c_height * 2 / 3,
+ c_height - (c_height < 10 ? 1 : 2));
+ break;
+ case CUR_LOWER_HALF:
+ vgacon_set_cursor_size(c_height / 2,
+ c_height - (c_height < 10 ? 1 : 2));
+ break;
+ case CUR_NONE:
+ if (vga_video_type >= VIDEO_TYPE_VGAC)
+ vgacon_set_cursor_size(31, 30);
+ else
+ vgacon_set_cursor_size(31, 31);
+ break;
+ default:
+ vgacon_set_cursor_size(1, c_height);
break;
}
}
@@ -588,7 +614,7 @@
raw_spin_unlock_irqrestore(&vga_lock, flags);
}
-static int vgacon_switch(struct vc_data *c)
+static bool vgacon_switch(struct vc_data *c)
{
int x = c->vc_cols * VGA_FONTWIDTH;
int y = c->vc_rows * c->vc_cell_height;
@@ -617,7 +643,7 @@
vgacon_doresize(c, c->vc_cols, c->vc_rows);
}
- return 0; /* Redrawing not needed */
+ return false; /* Redrawing not needed */
}
static void vga_set_palette(struct vc_data *vc, const unsigned char *table)
@@ -657,7 +683,7 @@
unsigned char ClockingMode; /* Seq-Controller:01h */
} vga_state;
-static void vga_vesa_blank(struct vgastate *state, int mode)
+static void vga_vesa_blank(struct vgastate *state, enum vesa_blank_mode mode)
{
/* save original values of VGA controller registers */
if (!vga_vesa_blanked) {
@@ -771,13 +797,14 @@
}
}
-static int vgacon_blank(struct vc_data *c, int blank, int mode_switch)
+static bool vgacon_blank(struct vc_data *c, enum vesa_blank_mode blank,
+ bool mode_switch)
{
switch (blank) {
- case 0: /* Unblank */
+ case VESA_NO_BLANKING: /* Unblank */
if (vga_vesa_blanked) {
vga_vesa_unblank(&vgastate);
- vga_vesa_blanked = 0;
+ vga_vesa_blanked = VESA_NO_BLANKING;
}
if (vga_palette_blanked) {
vga_set_palette(c, color_table);
@@ -787,8 +814,7 @@
vga_is_gfx = false;
/* Tell console.c that it has to restore the screen itself */
return 1;
- case 1: /* Normal blanking */
- case -1: /* Obsolete */
+ case VESA_VSYNC_SUSPEND: /* Normal blanking */
if (!mode_switch && vga_video_type == VIDEO_TYPE_VGAC) {
vga_pal_blank(&vgastate);
vga_palette_blanked = true;
@@ -1004,7 +1030,7 @@
/* void size to cause regs to be rewritten */
cursor_size_lastfrom = 0;
cursor_size_lastto = 0;
- c->vc_sw->con_cursor(c, CM_DRAW);
+ c->vc_sw->con_cursor(c, true);
}
c->vc_font.height = c->vc_cell_height = fontheight;
vc_resize(c, 0, rows); /* Adjust console size */
@@ -1013,7 +1039,7 @@
return 0;
}
-static int vgacon_font_set(struct vc_data *c, struct console_font *font,
+static int vgacon_font_set(struct vc_data *c, const struct console_font *font,
unsigned int vpitch, unsigned int flags)
{
unsigned charcount = font->charcount;
@@ -1049,12 +1075,12 @@
}
static int vgacon_resize(struct vc_data *c, unsigned int width,
- unsigned int height, unsigned int user)
+ unsigned int height, bool from_user)
{
if ((width << 1) * height > vga_vram_size)
return -EINVAL;
- if (user) {
+ if (from_user) {
/*
* Ho ho! Someone (svgatextmode, eh?) may have reprogrammed
* the video mode! Set the new defaults then and go away.
@@ -1074,15 +1100,15 @@
return 0;
}
-static int vgacon_set_origin(struct vc_data *c)
+static bool vgacon_set_origin(struct vc_data *c)
{
if (vga_is_gfx || /* We don't play origin tricks in graphic modes */
(console_blanked && !vga_palette_blanked)) /* Nor we write to blanked screens */
- return 0;
+ return false;
c->vc_origin = c->vc_visible_origin = vga_vram_base;
vga_set_mem_top(c);
vga_rolled_over = 0;
- return 1;
+ return true;
}
static void vgacon_save_screen(struct vc_data *c)
@@ -1159,11 +1185,10 @@
* The console `switch' structure for the VGA based console
*/
-static void vgacon_clear(struct vc_data *vc, int sy, int sx, int height,
- int width) { }
-static void vgacon_putc(struct vc_data *vc, int c, int ypos, int xpos) { }
-static void vgacon_putcs(struct vc_data *vc, const unsigned short *s,
- int count, int ypos, int xpos) { }
+static void vgacon_clear(struct vc_data *vc, unsigned int sy, unsigned int sx,
+ unsigned int width) { }
+static void vgacon_putcs(struct vc_data *vc, const u16 *s, unsigned int count,
+ unsigned int ypos, unsigned int xpos) { }
const struct consw vga_con = {
.owner = THIS_MODULE,
@@ -1171,7 +1196,6 @@
.con_init = vgacon_init,
.con_deinit = vgacon_deinit,
.con_clear = vgacon_clear,
- .con_putc = vgacon_putc,
.con_putcs = vgacon_putcs,
.con_cursor = vgacon_cursor,
.con_scroll = vgacon_scroll,
diff --git a/drivers/video/fbdev/core/bitblit.c b/drivers/video/fbdev/core/bitblit.c
index 8587c9d..3ff1b2a 100644
--- a/drivers/video/fbdev/core/bitblit.c
+++ b/drivers/video/fbdev/core/bitblit.c
@@ -233,7 +233,7 @@
}
}
-static void bit_cursor(struct vc_data *vc, struct fb_info *info, int mode,
+static void bit_cursor(struct vc_data *vc, struct fb_info *info, bool enable,
int fg, int bg)
{
struct fb_cursor cursor;
@@ -348,16 +348,7 @@
mask[i++] = msk;
}
- switch (mode) {
- case CM_ERASE:
- ops->cursor_state.enable = 0;
- break;
- case CM_DRAW:
- case CM_MOVE:
- default:
- ops->cursor_state.enable = (use_sw) ? 0 : 1;
- break;
- }
+ ops->cursor_state.enable = enable && !use_sw;
cursor.image.data = src;
cursor.image.fg_color = ops->cursor_state.image.fg_color;
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index 46823c2..98d0e2d 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -351,7 +351,7 @@
struct fb_info *info;
struct vc_data *vc = NULL;
int c;
- int mode;
+ bool enable;
int ret;
/* FIXME: we should sort out the unbind locking instead */
@@ -375,9 +375,8 @@
}
c = scr_readw((u16 *) vc->vc_pos);
- mode = (!ops->cursor_flash || ops->cursor_state.enable) ?
- CM_ERASE : CM_DRAW;
- ops->cursor(vc, info, mode, get_color(vc, info, c, 1),
+ enable = ops->cursor_flash && !ops->cursor_state.enable;
+ ops->cursor(vc, info, enable, get_color(vc, info, c, 1),
get_color(vc, info, c, 0));
console_unlock();
@@ -920,7 +919,7 @@
static const char *fbcon_startup(void)
{
- const char *display_desc = "frame buffer device";
+ static const char display_desc[] = "frame buffer device";
struct fbcon_display *p = &fb_display[fg_console];
struct vc_data *vc = vc_cons[fg_console].d;
const struct font_desc *font = NULL;
@@ -987,7 +986,7 @@
return display_desc;
}
-static void fbcon_init(struct vc_data *vc, int init)
+static void fbcon_init(struct vc_data *vc, bool init)
{
struct fb_info *info;
struct fbcon_ops *ops;
@@ -1234,8 +1233,8 @@
* restriction is simplicity & efficiency at the moment.
*/
-static void fbcon_clear(struct vc_data *vc, int sy, int sx, int height,
- int width)
+static void __fbcon_clear(struct vc_data *vc, unsigned int sy, unsigned int sx,
+ unsigned int height, unsigned int width)
{
struct fb_info *info = fbcon_info_from_console(vc->vc_num);
struct fbcon_ops *ops = info->fbcon_par;
@@ -1272,8 +1271,14 @@
ops->clear(vc, info, real_y(p, sy), sx, height, width);
}
-static void fbcon_putcs(struct vc_data *vc, const unsigned short *s,
- int count, int ypos, int xpos)
+static void fbcon_clear(struct vc_data *vc, unsigned int sy, unsigned int sx,
+ unsigned int width)
+{
+ __fbcon_clear(vc, sy, sx, 1, width);
+}
+
+static void fbcon_putcs(struct vc_data *vc, const u16 *s, unsigned int count,
+ unsigned int ypos, unsigned int xpos)
{
struct fb_info *info = fbcon_info_from_console(vc->vc_num);
struct fbcon_display *p = &fb_display[vc->vc_num];
@@ -1285,14 +1290,6 @@
get_color(vc, info, scr_readw(s), 0));
}
-static void fbcon_putc(struct vc_data *vc, int c, int ypos, int xpos)
-{
- unsigned short chr;
-
- scr_writew(c, &chr);
- fbcon_putcs(vc, &chr, 1, ypos, xpos);
-}
-
static void fbcon_clear_margins(struct vc_data *vc, int bottom_only)
{
struct fb_info *info = fbcon_info_from_console(vc->vc_num);
@@ -1302,7 +1299,7 @@
ops->clear_margins(vc, info, margin_color, bottom_only);
}
-static void fbcon_cursor(struct vc_data *vc, int mode)
+static void fbcon_cursor(struct vc_data *vc, bool enable)
{
struct fb_info *info = fbcon_info_from_console(vc->vc_num);
struct fbcon_ops *ops = info->fbcon_par;
@@ -1318,12 +1315,12 @@
else
fbcon_add_cursor_work(info);
- ops->cursor_flash = (mode == CM_ERASE) ? 0 : 1;
+ ops->cursor_flash = enable;
if (!ops->cursor)
return;
- ops->cursor(vc, info, mode, get_color(vc, info, c, 1),
+ ops->cursor(vc, info, enable, get_color(vc, info, c, 1),
get_color(vc, info, c, 0));
}
@@ -1743,7 +1740,7 @@
if (fbcon_is_inactive(vc, info))
return true;
- fbcon_cursor(vc, CM_ERASE);
+ fbcon_cursor(vc, false);
/*
* ++Geert: Only use ywrap/ypan if the console is in text mode
@@ -1759,7 +1756,7 @@
case SCROLL_MOVE:
fbcon_redraw_blit(vc, info, p, t, b - t - count,
count);
- fbcon_clear(vc, b - count, 0, count, vc->vc_cols);
+ __fbcon_clear(vc, b - count, 0, count, vc->vc_cols);
scr_memsetw((unsigned short *) (vc->vc_origin +
vc->vc_size_row *
(b - count)),
@@ -1782,7 +1779,7 @@
b - t - count, vc->vc_cols);
else
goto redraw_up;
- fbcon_clear(vc, b - count, 0, count, vc->vc_cols);
+ __fbcon_clear(vc, b - count, 0, count, vc->vc_cols);
break;
case SCROLL_PAN_REDRAW:
@@ -1800,7 +1797,7 @@
vc->vc_rows - b, b);
} else
fbcon_redraw_move(vc, p, t + count, b - t - count, t);
- fbcon_clear(vc, b - count, 0, count, vc->vc_cols);
+ __fbcon_clear(vc, b - count, 0, count, vc->vc_cols);
break;
case SCROLL_PAN_MOVE:
@@ -1823,14 +1820,14 @@
b - t - count, vc->vc_cols);
else
goto redraw_up;
- fbcon_clear(vc, b - count, 0, count, vc->vc_cols);
+ __fbcon_clear(vc, b - count, 0, count, vc->vc_cols);
break;
case SCROLL_REDRAW:
redraw_up:
fbcon_redraw(vc, t, b - t - count,
count * vc->vc_cols);
- fbcon_clear(vc, b - count, 0, count, vc->vc_cols);
+ __fbcon_clear(vc, b - count, 0, count, vc->vc_cols);
scr_memsetw((unsigned short *) (vc->vc_origin +
vc->vc_size_row *
(b - count)),
@@ -1847,7 +1844,7 @@
case SCROLL_MOVE:
fbcon_redraw_blit(vc, info, p, b - 1, b - t - count,
-count);
- fbcon_clear(vc, t, 0, count, vc->vc_cols);
+ __fbcon_clear(vc, t, 0, count, vc->vc_cols);
scr_memsetw((unsigned short *) (vc->vc_origin +
vc->vc_size_row *
t),
@@ -1870,7 +1867,7 @@
b - t - count, vc->vc_cols);
else
goto redraw_down;
- fbcon_clear(vc, t, 0, count, vc->vc_cols);
+ __fbcon_clear(vc, t, 0, count, vc->vc_cols);
break;
case SCROLL_PAN_MOVE:
@@ -1892,7 +1889,7 @@
b - t - count, vc->vc_cols);
else
goto redraw_down;
- fbcon_clear(vc, t, 0, count, vc->vc_cols);
+ __fbcon_clear(vc, t, 0, count, vc->vc_cols);
break;
case SCROLL_PAN_REDRAW:
@@ -1909,14 +1906,14 @@
fbcon_redraw_move(vc, p, count, t, 0);
} else
fbcon_redraw_move(vc, p, t, b - t - count, t + count);
- fbcon_clear(vc, t, 0, count, vc->vc_cols);
+ __fbcon_clear(vc, t, 0, count, vc->vc_cols);
break;
case SCROLL_REDRAW:
redraw_down:
fbcon_redraw(vc, b - 1, b - t - count,
-count * vc->vc_cols);
- fbcon_clear(vc, t, 0, count, vc->vc_cols);
+ __fbcon_clear(vc, t, 0, count, vc->vc_cols);
scr_memsetw((unsigned short *) (vc->vc_origin +
vc->vc_size_row *
t),
@@ -1995,7 +1992,7 @@
#define CALC_FONTSZ(h, p, c) ((h) * (p) * (c)) /* size = height * pitch * charcount */
static int fbcon_resize(struct vc_data *vc, unsigned int width,
- unsigned int height, unsigned int user)
+ unsigned int height, bool from_user)
{
struct fb_info *info = fbcon_info_from_console(vc->vc_num);
struct fbcon_ops *ops = info->fbcon_par;
@@ -2058,7 +2055,7 @@
return 0;
}
-static int fbcon_switch(struct vc_data *vc)
+static bool fbcon_switch(struct vc_data *vc)
{
struct fb_info *info, *old_info = NULL;
struct fbcon_ops *ops;
@@ -2180,9 +2177,9 @@
vc->vc_origin + vc->vc_size_row * vc->vc_top,
vc->vc_size_row * (vc->vc_bottom -
vc->vc_top) / 2);
- return 0;
+ return false;
}
- return 1;
+ return true;
}
static void fbcon_generic_blank(struct vc_data *vc, struct fb_info *info,
@@ -2195,12 +2192,13 @@
oldc = vc->vc_video_erase_char;
vc->vc_video_erase_char &= charmask;
- fbcon_clear(vc, 0, 0, vc->vc_rows, vc->vc_cols);
+ __fbcon_clear(vc, 0, 0, vc->vc_rows, vc->vc_cols);
vc->vc_video_erase_char = oldc;
}
}
-static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch)
+static bool fbcon_blank(struct vc_data *vc, enum vesa_blank_mode blank,
+ bool mode_switch)
{
struct fb_info *info = fbcon_info_from_console(vc->vc_num);
struct fbcon_ops *ops = info->fbcon_par;
@@ -2222,7 +2220,7 @@
if (!fbcon_is_inactive(vc, info)) {
if (ops->blank_state != blank) {
ops->blank_state = blank;
- fbcon_cursor(vc, blank ? CM_ERASE : CM_DRAW);
+ fbcon_cursor(vc, !blank);
ops->cursor_flash = (!blank);
if (fb_blank(info, blank))
@@ -2239,10 +2237,10 @@
else
fbcon_add_cursor_work(info);
- return 0;
+ return false;
}
-static int fbcon_debug_enter(struct vc_data *vc)
+static void fbcon_debug_enter(struct vc_data *vc)
{
struct fb_info *info = fbcon_info_from_console(vc->vc_num);
struct fbcon_ops *ops = info->fbcon_par;
@@ -2252,10 +2250,9 @@
if (info->fbops->fb_debug_enter)
info->fbops->fb_debug_enter(info);
fbcon_set_palette(vc, color_table);
- return 0;
}
-static int fbcon_debug_leave(struct vc_data *vc)
+static void fbcon_debug_leave(struct vc_data *vc)
{
struct fb_info *info = fbcon_info_from_console(vc->vc_num);
struct fbcon_ops *ops = info->fbcon_par;
@@ -2263,7 +2260,6 @@
ops->graphics = ops->save_graphics;
if (info->fbops->fb_debug_leave)
info->fbops->fb_debug_leave(info);
- return 0;
}
static int fbcon_get_font(struct vc_data *vc, struct console_font *font, unsigned int vpitch)
@@ -2461,7 +2457,7 @@
* but lets not assume that, since charcount of 512 is small for unicode support.
*/
-static int fbcon_set_font(struct vc_data *vc, struct console_font *font,
+static int fbcon_set_font(struct vc_data *vc, const struct console_font *font,
unsigned int vpitch, unsigned int flags)
{
struct fb_info *info = fbcon_info_from_console(vc->vc_num);
@@ -2534,7 +2530,8 @@
return fbcon_do_set_font(vc, font->width, font->height, charcount, new_data, 1);
}
-static int fbcon_set_def_font(struct vc_data *vc, struct console_font *font, char *name)
+static int fbcon_set_def_font(struct vc_data *vc, struct console_font *font,
+ const char *name)
{
struct fb_info *info = fbcon_info_from_console(vc->vc_num);
const struct font_desc *f;
@@ -2593,35 +2590,6 @@
fb_set_cmap(&palette_cmap, info);
}
-static u16 *fbcon_screen_pos(const struct vc_data *vc, int offset)
-{
- return (u16 *) (vc->vc_origin + offset);
-}
-
-static unsigned long fbcon_getxy(struct vc_data *vc, unsigned long pos,
- int *px, int *py)
-{
- unsigned long ret;
- int x, y;
-
- if (pos >= vc->vc_origin && pos < vc->vc_scr_end) {
- unsigned long offset = (pos - vc->vc_origin) / 2;
-
- x = offset % vc->vc_cols;
- y = offset / vc->vc_cols;
- ret = pos + (vc->vc_cols - x) * 2;
- } else {
- /* Should not happen */
- x = y = 0;
- ret = vc->vc_origin;
- }
- if (px)
- *px = x;
- if (py)
- *py = y;
- return ret;
-}
-
/* As we might be inside of softback, we may work with non-contiguous buffer,
that's why we have to use a separate routine. */
static void fbcon_invert_region(struct vc_data *vc, u16 * p, int cnt)
@@ -2650,7 +2618,7 @@
vc = vc_cons[ops->currcon].d;
/* Clear cursor, restore saved data */
- fbcon_cursor(vc, CM_ERASE);
+ fbcon_cursor(vc, false);
}
void fbcon_resumed(struct fb_info *info)
@@ -3152,7 +3120,6 @@
.con_init = fbcon_init,
.con_deinit = fbcon_deinit,
.con_clear = fbcon_clear,
- .con_putc = fbcon_putc,
.con_putcs = fbcon_putcs,
.con_cursor = fbcon_cursor,
.con_scroll = fbcon_scroll,
@@ -3163,8 +3130,6 @@
.con_font_default = fbcon_set_def_font,
.con_set_palette = fbcon_set_palette,
.con_invert_region = fbcon_invert_region,
- .con_screen_pos = fbcon_screen_pos,
- .con_getxy = fbcon_getxy,
.con_resize = fbcon_resize,
.con_debug_enter = fbcon_debug_enter,
.con_debug_leave = fbcon_debug_leave,
diff --git a/drivers/video/fbdev/core/fbcon.h b/drivers/video/fbdev/core/fbcon.h
index 0eaf54a..df70ea5 100644
--- a/drivers/video/fbdev/core/fbcon.h
+++ b/drivers/video/fbdev/core/fbcon.h
@@ -61,8 +61,8 @@
int fg, int bg);
void (*clear_margins)(struct vc_data *vc, struct fb_info *info,
int color, int bottom_only);
- void (*cursor)(struct vc_data *vc, struct fb_info *info, int mode,
- int fg, int bg);
+ void (*cursor)(struct vc_data *vc, struct fb_info *info,
+ bool enable, int fg, int bg);
int (*update_start)(struct fb_info *info);
int (*rotate_font)(struct fb_info *info, struct vc_data *vc);
struct fb_var_screeninfo var; /* copy of the current fb_var_screeninfo */
diff --git a/drivers/video/fbdev/core/fbcon_ccw.c b/drivers/video/fbdev/core/fbcon_ccw.c
index 2789ace..f9b794f 100644
--- a/drivers/video/fbdev/core/fbcon_ccw.c
+++ b/drivers/video/fbdev/core/fbcon_ccw.c
@@ -218,7 +218,7 @@
}
}
-static void ccw_cursor(struct vc_data *vc, struct fb_info *info, int mode,
+static void ccw_cursor(struct vc_data *vc, struct fb_info *info, bool enable,
int fg, int bg)
{
struct fb_cursor cursor;
@@ -349,16 +349,7 @@
kfree(tmp);
}
- switch (mode) {
- case CM_ERASE:
- ops->cursor_state.enable = 0;
- break;
- case CM_DRAW:
- case CM_MOVE:
- default:
- ops->cursor_state.enable = (use_sw) ? 0 : 1;
- break;
- }
+ ops->cursor_state.enable = enable && !use_sw;
cursor.image.data = src;
cursor.image.fg_color = ops->cursor_state.image.fg_color;
diff --git a/drivers/video/fbdev/core/fbcon_cw.c b/drivers/video/fbdev/core/fbcon_cw.c
index 86a254c..903f6fc 100644
--- a/drivers/video/fbdev/core/fbcon_cw.c
+++ b/drivers/video/fbdev/core/fbcon_cw.c
@@ -201,7 +201,7 @@
}
}
-static void cw_cursor(struct vc_data *vc, struct fb_info *info, int mode,
+static void cw_cursor(struct vc_data *vc, struct fb_info *info, bool enable,
int fg, int bg)
{
struct fb_cursor cursor;
@@ -332,16 +332,7 @@
kfree(tmp);
}
- switch (mode) {
- case CM_ERASE:
- ops->cursor_state.enable = 0;
- break;
- case CM_DRAW:
- case CM_MOVE:
- default:
- ops->cursor_state.enable = (use_sw) ? 0 : 1;
- break;
- }
+ ops->cursor_state.enable = enable && !use_sw;
cursor.image.data = src;
cursor.image.fg_color = ops->cursor_state.image.fg_color;
diff --git a/drivers/video/fbdev/core/fbcon_ud.c b/drivers/video/fbdev/core/fbcon_ud.c
index 23bc045..5943319 100644
--- a/drivers/video/fbdev/core/fbcon_ud.c
+++ b/drivers/video/fbdev/core/fbcon_ud.c
@@ -248,7 +248,7 @@
}
}
-static void ud_cursor(struct vc_data *vc, struct fb_info *info, int mode,
+static void ud_cursor(struct vc_data *vc, struct fb_info *info, bool enable,
int fg, int bg)
{
struct fb_cursor cursor;
@@ -372,16 +372,7 @@
mask[i++] = ~msk;
}
- switch (mode) {
- case CM_ERASE:
- ops->cursor_state.enable = 0;
- break;
- case CM_DRAW:
- case CM_MOVE:
- default:
- ops->cursor_state.enable = (use_sw) ? 0 : 1;
- break;
- }
+ ops->cursor_state.enable = enable && !use_sw;
cursor.image.data = src;
cursor.image.fg_color = ops->cursor_state.image.fg_color;
diff --git a/drivers/video/fbdev/core/tileblit.c b/drivers/video/fbdev/core/tileblit.c
index 2768eff..eff7ec4 100644
--- a/drivers/video/fbdev/core/tileblit.c
+++ b/drivers/video/fbdev/core/tileblit.c
@@ -79,7 +79,7 @@
return;
}
-static void tile_cursor(struct vc_data *vc, struct fb_info *info, int mode,
+static void tile_cursor(struct vc_data *vc, struct fb_info *info, bool enable,
int fg, int bg)
{
struct fb_tilecursor cursor;
@@ -87,7 +87,7 @@
cursor.sx = vc->state.x;
cursor.sy = vc->state.y;
- cursor.mode = (mode == CM_ERASE || use_sw) ? 0 : 1;
+ cursor.mode = enable && !use_sw;
cursor.fg = fg;
cursor.bg = bg;
diff --git a/drivers/video/fbdev/tgafb.c b/drivers/video/fbdev/tgafb.c
index ca43774..dccfc38 100644
--- a/drivers/video/fbdev/tgafb.c
+++ b/drivers/video/fbdev/tgafb.c
@@ -380,7 +380,7 @@
BT463_LOAD_ADDR(par, 0x0000);
TGA_WRITE_REG(par, BT463_PALETTE << 2, TGA_RAMDAC_SETUP_REG);
-#ifdef CONFIG_HW_CONSOLE
+#ifdef CONFIG_VT
for (i = 0; i < 16; i++) {
int j = color_table[i];
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 513c0b1..e6049a7 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -78,5 +78,15 @@
This support is also available as a module. If so, the module
will be called sgi_w1.
+config W1_MASTER_UART
+ tristate "UART 1-wire driver"
+ depends on SERIAL_DEV_BUS
+ help
+ Say Y here if you want to communicate with your 1-wire devices using
+ UART interface.
+
+ This support is also available as a module. If so, the module
+ will be called w1-uart.
+
endmenu
diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile
index 6c5a21f..227f809 100644
--- a/drivers/w1/masters/Makefile
+++ b/drivers/w1/masters/Makefile
@@ -12,3 +12,4 @@
obj-$(CONFIG_W1_MASTER_GPIO) += w1-gpio.o
obj-$(CONFIG_HDQ_MASTER_OMAP) += omap_hdq.o
obj-$(CONFIG_W1_MASTER_SGI) += sgi_w1.o
+obj-$(CONFIG_W1_MASTER_UART) += w1-uart.o
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index 090cbbf..ba1d086 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -151,15 +151,13 @@
/*
* disassociate the w1 device from the driver
*/
-static int mxc_w1_remove(struct platform_device *pdev)
+static void mxc_w1_remove(struct platform_device *pdev)
{
struct mxc_w1_device *mdev = platform_get_drvdata(pdev);
w1_remove_master_device(&mdev->bus_master);
clk_disable_unprepare(mdev->clk);
-
- return 0;
}
static const struct of_device_id mxc_w1_dt_ids[] = {
@@ -174,7 +172,7 @@
.of_match_table = mxc_w1_dt_ids,
},
.probe = mxc_w1_probe,
- .remove = mxc_w1_remove,
+ .remove_new = mxc_w1_remove,
};
module_platform_driver(mxc_w1_driver);
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 6a39b71..d1cb519 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -647,7 +647,7 @@
return ret;
}
-static int omap_hdq_remove(struct platform_device *pdev)
+static void omap_hdq_remove(struct platform_device *pdev)
{
int active;
@@ -661,8 +661,6 @@
if (active >= 0)
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
-
- return 0;
}
static const struct of_device_id omap_hdq_dt_ids[] = {
@@ -674,7 +672,7 @@
static struct platform_driver omap_hdq_driver = {
.probe = omap_hdq_probe,
- .remove = omap_hdq_remove,
+ .remove_new = omap_hdq_remove,
.driver = {
.name = "omap_hdq",
.of_match_table = omap_hdq_dt_ids,
diff --git a/drivers/w1/masters/sgi_w1.c b/drivers/w1/masters/sgi_w1.c
index d7fbc3c..7bb7876 100644
--- a/drivers/w1/masters/sgi_w1.c
+++ b/drivers/w1/masters/sgi_w1.c
@@ -105,13 +105,11 @@
/*
* disassociate the w1 device from the driver
*/
-static int sgi_w1_remove(struct platform_device *pdev)
+static void sgi_w1_remove(struct platform_device *pdev)
{
struct sgi_w1_device *sdev = platform_get_drvdata(pdev);
w1_remove_master_device(&sdev->bus_master);
-
- return 0;
}
static struct platform_driver sgi_w1_driver = {
@@ -119,7 +117,7 @@
.name = "sgi_w1",
},
.probe = sgi_w1_probe,
- .remove = sgi_w1_remove,
+ .remove_new = sgi_w1_remove,
};
module_platform_driver(sgi_w1_driver);
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index 05c6703..34128e6 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -141,7 +141,7 @@
return 0;
}
-static int w1_gpio_remove(struct platform_device *pdev)
+static void w1_gpio_remove(struct platform_device *pdev)
{
struct w1_bus_master *master = platform_get_drvdata(pdev);
struct w1_gpio_ddata *ddata = master->data;
@@ -150,8 +150,6 @@
gpiod_set_value(ddata->pullup_gpiod, 0);
w1_remove_master_device(master);
-
- return 0;
}
static struct platform_driver w1_gpio_driver = {
@@ -160,7 +158,7 @@
.of_match_table = of_match_ptr(w1_gpio_dt_ids),
},
.probe = w1_gpio_probe,
- .remove = w1_gpio_remove,
+ .remove_new = w1_gpio_remove,
};
module_platform_driver(w1_gpio_driver);
diff --git a/drivers/w1/masters/w1-uart.c b/drivers/w1/masters/w1-uart.c
new file mode 100644
index 0000000..a31782e
--- /dev/null
+++ b/drivers/w1/masters/w1-uart.c
@@ -0,0 +1,415 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * w1-uart - UART 1-Wire bus driver
+ *
+ * Uses the UART interface (via Serial Device Bus) to create the 1-Wire
+ * timing patterns. Implements the following 1-Wire master interface:
+ *
+ * - reset_bus: requests baud-rate 9600
+ *
+ * - touch_bit: requests baud-rate 115200
+ *
+ * Author: Christoph Winklhofer <cj.winklhofer@gmail.com>
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/serdev.h>
+#include <linux/w1.h>
+
+/* UART packet contains start and stop bit */
+#define W1_UART_BITS_PER_PACKET (BITS_PER_BYTE + 2)
+
+/* Timeout to wait for completion of serdev-receive */
+#define W1_UART_TIMEOUT msecs_to_jiffies(500)
+
+/**
+ * struct w1_uart_config - configuration for 1-Wire operation
+ * @baudrate: baud-rate returned from serdev
+ * @delay_us: delay to complete a 1-Wire cycle (in us)
+ * @tx_byte: byte to generate 1-Wire timing pattern
+ */
+struct w1_uart_config {
+ unsigned int baudrate;
+ unsigned int delay_us;
+ u8 tx_byte;
+};
+
+/**
+ * struct w1_uart_device - 1-Wire UART device structure
+ * @serdev: serial device
+ * @bus: w1-bus master
+ * @cfg_reset: config for 1-Wire reset
+ * @cfg_touch_0: config for 1-Wire write-0 cycle
+ * @cfg_touch_1: config for 1-Wire write-1 and read cycle
+ * @rx_byte_received: completion for serdev receive
+ * @rx_mutex: mutex to protect rx_err and rx_byte
+ * @rx_err: indicates an error in serdev-receive
+ * @rx_byte: result byte from serdev-receive
+ */
+struct w1_uart_device {
+ struct serdev_device *serdev;
+ struct w1_bus_master bus;
+
+ struct w1_uart_config cfg_reset;
+ struct w1_uart_config cfg_touch_0;
+ struct w1_uart_config cfg_touch_1;
+
+ struct completion rx_byte_received;
+ /*
+ * protect rx_err and rx_byte from concurrent access in
+ * w1-callbacks and serdev-receive.
+ */
+ struct mutex rx_mutex;
+ int rx_err;
+ u8 rx_byte;
+};
+
+/**
+ * struct w1_uart_limits - limits for 1-Wire operations
+ * @baudrate: Requested baud-rate to create 1-Wire timing pattern
+ * @bit_min_us: minimum time for a bit (in us)
+ * @bit_max_us: maximum time for a bit (in us)
+ * @sample_us: timespan to sample 1-Wire response
+ * @cycle_us: duration of the 1-Wire cycle
+ */
+struct w1_uart_limits {
+ unsigned int baudrate;
+ unsigned int bit_min_us;
+ unsigned int bit_max_us;
+ unsigned int sample_us;
+ unsigned int cycle_us;
+};
+
+static inline unsigned int baud_to_bit_ns(unsigned int baud)
+{
+ return NSEC_PER_SEC / baud;
+}
+
+static inline unsigned int to_ns(unsigned int us)
+{
+ return us * NSEC_PER_USEC;
+}
+
+/*
+ * Set baud-rate, delay and tx-byte to create a 1-Wire pulse and adapt
+ * the tx-byte according to the actual baud-rate.
+ *
+ * Reject when:
+ * - time for a bit outside min/max range
+ * - a 1-Wire response is not detectable for sent byte
+ */
+static int w1_uart_set_config(struct serdev_device *serdev,
+ const struct w1_uart_limits *limits,
+ struct w1_uart_config *w1cfg)
+{
+ unsigned int packet_ns;
+ unsigned int bits_low;
+ unsigned int bit_ns;
+ unsigned int low_ns;
+
+ w1cfg->baudrate = serdev_device_set_baudrate(serdev, limits->baudrate);
+ if (w1cfg->baudrate == 0)
+ return -EINVAL;
+
+ /* Compute in nanoseconds for accuracy */
+ bit_ns = baud_to_bit_ns(w1cfg->baudrate);
+ bits_low = to_ns(limits->bit_min_us) / bit_ns;
+ /* start bit is always low */
+ low_ns = bit_ns * (bits_low + 1);
+
+ if (low_ns < to_ns(limits->bit_min_us))
+ return -EINVAL;
+
+ if (low_ns > to_ns(limits->bit_max_us))
+ return -EINVAL;
+
+ /* 1-Wire response detectable for sent byte */
+ if (limits->sample_us > 0 &&
+ bit_ns * BITS_PER_BYTE < low_ns + to_ns(limits->sample_us))
+ return -EINVAL;
+
+ /* delay: 1-Wire cycle takes longer than the UART packet */
+ packet_ns = bit_ns * W1_UART_BITS_PER_PACKET;
+ w1cfg->delay_us = 0;
+ if (to_ns(limits->cycle_us) > packet_ns)
+ w1cfg->delay_us =
+ (to_ns(limits->cycle_us) - packet_ns) / NSEC_PER_USEC;
+
+ /* byte to create 1-Wire pulse */
+ w1cfg->tx_byte = 0xff << bits_low;
+
+ return 0;
+}
+
+/*
+ * Configuration for reset and presence detect
+ * - bit_min_us is 480us, add margin and use 485us
+ * - limits for sample time 60us-75us, use 65us
+ */
+static int w1_uart_set_config_reset(struct w1_uart_device *w1dev)
+{
+ struct serdev_device *serdev = w1dev->serdev;
+ struct device_node *np = serdev->dev.of_node;
+
+ struct w1_uart_limits limits = { .baudrate = 9600,
+ .bit_min_us = 485,
+ .bit_max_us = 640,
+ .sample_us = 65,
+ .cycle_us = 960 };
+
+ of_property_read_u32(np, "reset-bps", &limits.baudrate);
+
+ return w1_uart_set_config(serdev, &limits, &w1dev->cfg_reset);
+}
+
+/*
+ * Configuration for write-0 cycle (touch bit 0)
+ * - bit_min_us is 60us, add margin and use 65us
+ * - no sampling required, sample_us = 0
+ */
+static int w1_uart_set_config_touch_0(struct w1_uart_device *w1dev)
+{
+ struct serdev_device *serdev = w1dev->serdev;
+ struct device_node *np = serdev->dev.of_node;
+
+ struct w1_uart_limits limits = { .baudrate = 115200,
+ .bit_min_us = 65,
+ .bit_max_us = 120,
+ .sample_us = 0,
+ .cycle_us = 70 };
+
+ of_property_read_u32(np, "write-0-bps", &limits.baudrate);
+
+ return w1_uart_set_config(serdev, &limits, &w1dev->cfg_touch_0);
+}
+
+/*
+ * Configuration for write-1 and read cycle (touch bit 1)
+ * - bit_min_us is 5us, add margin and use 6us
+ * - limits for sample time 5us-15us, use 15us
+ */
+static int w1_uart_set_config_touch_1(struct w1_uart_device *w1dev)
+{
+ struct serdev_device *serdev = w1dev->serdev;
+ struct device_node *np = serdev->dev.of_node;
+
+ struct w1_uart_limits limits = { .baudrate = 115200,
+ .bit_min_us = 6,
+ .bit_max_us = 15,
+ .sample_us = 15,
+ .cycle_us = 70 };
+
+ of_property_read_u32(np, "write-1-bps", &limits.baudrate);
+
+ return w1_uart_set_config(serdev, &limits, &w1dev->cfg_touch_1);
+}
+
+/*
+ * Configure and open the serial device
+ */
+static int w1_uart_serdev_open(struct w1_uart_device *w1dev)
+{
+ struct serdev_device *serdev = w1dev->serdev;
+ struct device *dev = &serdev->dev;
+ int ret;
+
+ ret = devm_serdev_device_open(dev, serdev);
+ if (ret < 0)
+ return ret;
+
+ ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE);
+ if (ret < 0) {
+ dev_err(dev, "set parity failed\n");
+ return ret;
+ }
+
+ ret = w1_uart_set_config_reset(w1dev);
+ if (ret < 0) {
+ dev_err(dev, "config for reset failed\n");
+ return ret;
+ }
+
+ ret = w1_uart_set_config_touch_0(w1dev);
+ if (ret < 0) {
+ dev_err(dev, "config for touch-0 failed\n");
+ return ret;
+ }
+
+ ret = w1_uart_set_config_touch_1(w1dev);
+ if (ret < 0) {
+ dev_err(dev, "config for touch-1 failed\n");
+ return ret;
+ }
+
+ serdev_device_set_flow_control(serdev, false);
+
+ return 0;
+}
+
+/*
+ * Send one byte (tx_byte) and read one byte (rx_byte) via serdev.
+ */
+static int w1_uart_serdev_tx_rx(struct w1_uart_device *w1dev,
+ const struct w1_uart_config *w1cfg, u8 *rx_byte)
+{
+ struct serdev_device *serdev = w1dev->serdev;
+ int ret;
+
+ serdev_device_write_flush(serdev);
+ serdev_device_set_baudrate(serdev, w1cfg->baudrate);
+
+ /* write and immediately read one byte */
+ reinit_completion(&w1dev->rx_byte_received);
+ ret = serdev_device_write_buf(serdev, &w1cfg->tx_byte, 1);
+ if (ret != 1)
+ return -EIO;
+ ret = wait_for_completion_interruptible_timeout(
+ &w1dev->rx_byte_received, W1_UART_TIMEOUT);
+ if (ret <= 0)
+ return -EIO;
+
+ /* locking could fail when serdev is unexpectedly receiving. */
+ if (!mutex_trylock(&w1dev->rx_mutex))
+ return -EIO;
+
+ ret = w1dev->rx_err;
+ if (ret == 0)
+ *rx_byte = w1dev->rx_byte;
+
+ mutex_unlock(&w1dev->rx_mutex);
+
+ if (w1cfg->delay_us > 0)
+ fsleep(w1cfg->delay_us);
+
+ return ret;
+}
+
+static size_t w1_uart_serdev_receive_buf(struct serdev_device *serdev,
+ const u8 *buf, size_t count)
+{
+ struct w1_uart_device *w1dev = serdev_device_get_drvdata(serdev);
+
+ mutex_lock(&w1dev->rx_mutex);
+
+ /* sent a single byte and receive one single byte */
+ if (count == 1) {
+ w1dev->rx_byte = buf[0];
+ w1dev->rx_err = 0;
+ } else {
+ w1dev->rx_err = -EIO;
+ }
+
+ mutex_unlock(&w1dev->rx_mutex);
+ complete(&w1dev->rx_byte_received);
+
+ return count;
+}
+
+static const struct serdev_device_ops w1_uart_serdev_ops = {
+ .receive_buf = w1_uart_serdev_receive_buf,
+ .write_wakeup = serdev_device_write_wakeup,
+};
+
+/*
+ * 1-wire reset and presence detect: A present slave will manipulate
+ * the received byte by pulling the 1-Wire low.
+ */
+static u8 w1_uart_reset_bus(void *data)
+{
+ struct w1_uart_device *w1dev = data;
+ const struct w1_uart_config *w1cfg = &w1dev->cfg_reset;
+ int ret;
+ u8 val;
+
+ ret = w1_uart_serdev_tx_rx(w1dev, w1cfg, &val);
+ if (ret < 0)
+ return -1;
+
+ /* Device present (0) or no device (1) */
+ return val != w1cfg->tx_byte ? 0 : 1;
+}
+
+/*
+ * 1-Wire read and write cycle: Only the read-0 manipulates the
+ * received byte, all others left the line untouched.
+ */
+static u8 w1_uart_touch_bit(void *data, u8 bit)
+{
+ struct w1_uart_device *w1dev = data;
+ const struct w1_uart_config *w1cfg = bit ? &w1dev->cfg_touch_1 :
+ &w1dev->cfg_touch_0;
+ int ret;
+ u8 val;
+
+ ret = w1_uart_serdev_tx_rx(w1dev, w1cfg, &val);
+
+ /* return inactive bus state on error */
+ if (ret < 0)
+ return 1;
+
+ return val == w1cfg->tx_byte ? 1 : 0;
+}
+
+static int w1_uart_probe(struct serdev_device *serdev)
+{
+ struct device *dev = &serdev->dev;
+ struct w1_uart_device *w1dev;
+ int ret;
+
+ w1dev = devm_kzalloc(dev, sizeof(*w1dev), GFP_KERNEL);
+ if (!w1dev)
+ return -ENOMEM;
+ w1dev->bus.data = w1dev;
+ w1dev->bus.reset_bus = w1_uart_reset_bus;
+ w1dev->bus.touch_bit = w1_uart_touch_bit;
+ w1dev->serdev = serdev;
+
+ init_completion(&w1dev->rx_byte_received);
+ mutex_init(&w1dev->rx_mutex);
+
+ ret = w1_uart_serdev_open(w1dev);
+ if (ret < 0)
+ return ret;
+ serdev_device_set_drvdata(serdev, w1dev);
+ serdev_device_set_client_ops(serdev, &w1_uart_serdev_ops);
+
+ return w1_add_master_device(&w1dev->bus);
+}
+
+static void w1_uart_remove(struct serdev_device *serdev)
+{
+ struct w1_uart_device *w1dev = serdev_device_get_drvdata(serdev);
+
+ /*
+ * Waits until w1-uart callbacks are finished, serdev is closed
+ * and its device data released automatically by devres (waits
+ * until serdev-receive is finished).
+ */
+ w1_remove_master_device(&w1dev->bus);
+}
+
+static const struct of_device_id w1_uart_of_match[] = {
+ { .compatible = "w1-uart" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, w1_uart_of_match);
+
+static struct serdev_device_driver w1_uart_driver = {
+ .driver = {
+ .name = "w1-uart",
+ .of_match_table = w1_uart_of_match,
+ },
+ .probe = w1_uart_probe,
+ .remove = w1_uart_remove,
+};
+
+module_serdev_device_driver(w1_uart_driver);
+
+MODULE_DESCRIPTION("UART w1 bus driver");
+MODULE_AUTHOR("Christoph Winklhofer <cj.winklhofer@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 5353cbd..afb1cc4 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -167,7 +167,7 @@
static int w1_uevent(const struct device *dev, struct kobj_uevent_env *env);
-static struct bus_type w1_bus_type = {
+static const struct bus_type w1_bus_type = {
.name = "w1",
.uevent = w1_uevent,
};
diff --git a/include/linux/console.h b/include/linux/console.h
index 779d388..31a8f5b 100644
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -18,6 +18,7 @@
#include <linux/bits.h>
#include <linux/rculist.h>
#include <linux/types.h>
+#include <linux/vesa.h>
struct vc_data;
struct console_font_op;
@@ -36,63 +37,91 @@
/**
* struct consw - callbacks for consoles
*
+ * @owner: the module to get references of when this console is used
+ * @con_startup: set up the console and return its name (like VGA, EGA, ...)
+ * @con_init: initialize the console on @vc. @init is true for the very first
+ * call on this @vc.
+ * @con_deinit: deinitialize the console from @vc.
+ * @con_clear: erase @count characters at [@x, @y] on @vc. @count >= 1.
+ * @con_putc: emit one character with attributes @ca to [@x, @y] on @vc.
+ * (optional -- @con_putcs would be called instead)
+ * @con_putcs: emit @count characters with attributes @s to [@x, @y] on @vc.
+ * @con_cursor: enable/disable cursor depending on @enable
* @con_scroll: move lines from @top to @bottom in direction @dir by @lines.
* Return true if no generic handling should be done.
* Invoked by csi_M and printing to the console.
- * @con_set_palette: sets the palette of the console to @table (optional)
+ * @con_switch: notifier about the console switch; it is supposed to return
+ * true if a redraw is needed.
+ * @con_blank: blank/unblank the console. The target mode is passed in @blank.
+ * @mode_switch is set if changing from/to text/graphics. The hook
+ * is supposed to return true if a redraw is needed.
+ * @con_font_set: set console @vc font to @font with height @vpitch. @flags can
+ * be %KD_FONT_FLAG_DONT_RECALC. (optional)
+ * @con_font_get: fetch the current font on @vc of height @vpitch into @font.
+ * (optional)
+ * @con_font_default: set default font on @vc. @name can be %NULL or font name
+ * to search for. @font can be filled back. (optional)
+ * @con_resize: resize the @vc console to @width x @height. @from_user is true
+ * when this change comes from the user space.
+ * @con_set_palette: sets the palette of the console @vc to @table (optional)
* @con_scrolldelta: the contents of the console should be scrolled by @lines.
* Invoked by user. (optional)
+ * @con_set_origin: set origin (see &vc_data::vc_origin) of the @vc. If not
+ * provided or returns false, the origin is set to
+ * @vc->vc_screenbuf. (optional)
+ * @con_save_screen: save screen content into @vc->vc_screenbuf. Called e.g.
+ * upon entering graphics. (optional)
+ * @con_build_attr: build attributes based on @color, @intensity and other
+ * parameters. The result is used for both normal and erase
+ * characters. (optional)
+ * @con_invert_region: invert a region of length @count on @vc starting at @p.
+ * (optional)
+ * @con_debug_enter: prepare the console for the debugger. This includes, but
+ * is not limited to, unblanking the console, loading an
+ * appropriate palette, and allowing debugger generated output.
+ * (optional)
+ * @con_debug_leave: restore the console to its pre-debug state as closely as
+ * possible. (optional)
*/
struct consw {
struct module *owner;
const char *(*con_startup)(void);
- void (*con_init)(struct vc_data *vc, int init);
+ void (*con_init)(struct vc_data *vc, bool init);
void (*con_deinit)(struct vc_data *vc);
- void (*con_clear)(struct vc_data *vc, int sy, int sx, int height,
- int width);
- void (*con_putc)(struct vc_data *vc, int c, int ypos, int xpos);
- void (*con_putcs)(struct vc_data *vc, const unsigned short *s,
- int count, int ypos, int xpos);
- void (*con_cursor)(struct vc_data *vc, int mode);
+ void (*con_clear)(struct vc_data *vc, unsigned int y,
+ unsigned int x, unsigned int count);
+ void (*con_putc)(struct vc_data *vc, u16 ca, unsigned int y,
+ unsigned int x);
+ void (*con_putcs)(struct vc_data *vc, const u16 *s,
+ unsigned int count, unsigned int ypos,
+ unsigned int xpos);
+ void (*con_cursor)(struct vc_data *vc, bool enable);
bool (*con_scroll)(struct vc_data *vc, unsigned int top,
unsigned int bottom, enum con_scroll dir,
unsigned int lines);
- int (*con_switch)(struct vc_data *vc);
- int (*con_blank)(struct vc_data *vc, int blank, int mode_switch);
- int (*con_font_set)(struct vc_data *vc, struct console_font *font,
- unsigned int vpitch, unsigned int flags);
+ bool (*con_switch)(struct vc_data *vc);
+ bool (*con_blank)(struct vc_data *vc, enum vesa_blank_mode blank,
+ bool mode_switch);
+ int (*con_font_set)(struct vc_data *vc,
+ const struct console_font *font,
+ unsigned int vpitch, unsigned int flags);
int (*con_font_get)(struct vc_data *vc, struct console_font *font,
unsigned int vpitch);
int (*con_font_default)(struct vc_data *vc,
- struct console_font *font, char *name);
+ struct console_font *font, const char *name);
int (*con_resize)(struct vc_data *vc, unsigned int width,
- unsigned int height, unsigned int user);
+ unsigned int height, bool from_user);
void (*con_set_palette)(struct vc_data *vc,
const unsigned char *table);
void (*con_scrolldelta)(struct vc_data *vc, int lines);
- int (*con_set_origin)(struct vc_data *vc);
+ bool (*con_set_origin)(struct vc_data *vc);
void (*con_save_screen)(struct vc_data *vc);
u8 (*con_build_attr)(struct vc_data *vc, u8 color,
enum vc_intensity intensity,
bool blink, bool underline, bool reverse, bool italic);
void (*con_invert_region)(struct vc_data *vc, u16 *p, int count);
- u16 *(*con_screen_pos)(const struct vc_data *vc, int offset);
- unsigned long (*con_getxy)(struct vc_data *vc, unsigned long position,
- int *px, int *py);
- /*
- * Flush the video console driver's scrollback buffer
- */
- void (*con_flush_scrollback)(struct vc_data *vc);
- /*
- * Prepare the console for the debugger. This includes, but is not
- * limited to, unblanking the console, loading an appropriate
- * palette, and allowing debugger generated output.
- */
- int (*con_debug_enter)(struct vc_data *vc);
- /*
- * Restore the console to its pre-debug state as closely as possible.
- */
- int (*con_debug_leave)(struct vc_data *vc);
+ void (*con_debug_enter)(struct vc_data *vc);
+ void (*con_debug_leave)(struct vc_data *vc);
};
extern const struct consw *conswitchp;
@@ -112,32 +141,21 @@
int do_unregister_con_driver(const struct consw *csw);
int do_take_over_console(const struct consw *sw, int first, int last, int deflt);
void give_up_console(const struct consw *sw);
-#ifdef CONFIG_HW_CONSOLE
-int con_debug_enter(struct vc_data *vc);
-int con_debug_leave(void);
+#ifdef CONFIG_VT
+void con_debug_enter(struct vc_data *vc);
+void con_debug_leave(void);
#else
-static inline int con_debug_enter(struct vc_data *vc)
-{
- return 0;
-}
-static inline int con_debug_leave(void)
-{
- return 0;
-}
+static inline void con_debug_enter(struct vc_data *vc) { }
+static inline void con_debug_leave(void) { }
#endif
-/* cursor */
-#define CM_DRAW (1)
-#define CM_ERASE (2)
-#define CM_MOVE (3)
-
/*
* The interface for a console, or any other device that wants to capture
* console messages (printer driver?)
*/
/**
- * cons_flags - General console flags
+ * enum cons_flags - General console flags
* @CON_PRINTBUFFER: Used by newly registered consoles to avoid duplicate
* output of messages that were already shown by boot
* consoles or read by userspace via syslog() syscall.
@@ -218,7 +236,7 @@
static_assert(sizeof(struct nbcon_state) <= sizeof(int));
/**
- * nbcon_prio - console owner priority for nbcon consoles
+ * enum nbcon_prio - console owner priority for nbcon consoles
* @NBCON_PRIO_NONE: Unused
* @NBCON_PRIO_NORMAL: Normal (non-emergency) usage
* @NBCON_PRIO_EMERGENCY: Emergency output (WARN/OOPS...)
@@ -450,7 +468,7 @@
* for_each_console() - Iterator over registered consoles
* @con: struct console pointer used as loop cursor
*
- * The console list and the console->flags are immutable while iterating.
+ * The console list and the &console.flags are immutable while iterating.
*
* Requires console_list_lock to be held.
*/
@@ -520,12 +538,6 @@
*/
extern atomic_t ignore_console_lock_warning;
-/* VESA Blanking Levels */
-#define VESA_NO_BLANKING 0
-#define VESA_VSYNC_SUSPEND 1
-#define VESA_HSYNC_SUSPEND 2
-#define VESA_POWERDOWN 3
-
extern void console_init(void);
/* For deferred console takeover */
diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h
index 539f1cd..20f564e 100644
--- a/include/linux/console_struct.h
+++ b/include/linux/console_struct.h
@@ -151,7 +151,6 @@
DECLARE_BITMAP(vc_tab_stop, VC_TABSTOPS_COUNT); /* Tab stops. 256 columns. */
unsigned char vc_palette[16*3]; /* Colour palette for VGA+ */
unsigned short * vc_translate;
- unsigned int vc_resize_user; /* resize request from user */
unsigned int vc_bell_pitch; /* Console bell pitch */
unsigned int vc_bell_duration; /* Console bell duration */
unsigned short vc_cur_blink_ms; /* Cursor blink duration */
diff --git a/include/linux/selection.h b/include/linux/selection.h
index 170ef28..bab7d30 100644
--- a/include/linux/selection.h
+++ b/include/linux/selection.h
@@ -14,17 +14,16 @@
struct tty_struct;
struct vc_data;
-extern void clear_selection(void);
-extern int set_selection_user(const struct tiocl_selection __user *sel,
- struct tty_struct *tty);
-extern int set_selection_kernel(struct tiocl_selection *v,
- struct tty_struct *tty);
-extern int paste_selection(struct tty_struct *tty);
-extern int sel_loadlut(char __user *p);
-extern int mouse_reporting(void);
-extern void mouse_report(struct tty_struct * tty, int butt, int mrx, int mry);
+void clear_selection(void);
+int set_selection_user(const struct tiocl_selection __user *sel,
+ struct tty_struct *tty);
+int set_selection_kernel(struct tiocl_selection *v, struct tty_struct *tty);
+int paste_selection(struct tty_struct *tty);
+int sel_loadlut(u32 __user *lut);
+int mouse_reporting(void);
+void mouse_report(struct tty_struct *tty, int butt, int mrx, int mry);
-bool vc_is_sel(struct vc_data *vc);
+bool vc_is_sel(const struct vc_data *vc);
extern int console_blanked;
@@ -33,24 +32,21 @@
extern unsigned char default_grn[];
extern unsigned char default_blu[];
-extern unsigned short *screen_pos(const struct vc_data *vc, int w_offset,
- bool viewed);
-extern u16 screen_glyph(const struct vc_data *vc, int offset);
-extern u32 screen_glyph_unicode(const struct vc_data *vc, int offset);
-extern void complement_pos(struct vc_data *vc, int offset);
-extern void invert_screen(struct vc_data *vc, int offset, int count, bool viewed);
+unsigned short *screen_pos(const struct vc_data *vc, int w_offset, bool viewed);
+u16 screen_glyph(const struct vc_data *vc, int offset);
+u32 screen_glyph_unicode(const struct vc_data *vc, int offset);
+void complement_pos(struct vc_data *vc, int offset);
+void invert_screen(struct vc_data *vc, int offset, int count, bool viewed);
-extern void getconsxy(const struct vc_data *vc, unsigned char xy[static 2]);
-extern void putconsxy(struct vc_data *vc, unsigned char xy[static const 2]);
+void getconsxy(const struct vc_data *vc, unsigned char xy[static 2]);
+void putconsxy(struct vc_data *vc, unsigned char xy[static const 2]);
-extern u16 vcs_scr_readw(const struct vc_data *vc, const u16 *org);
-extern void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org);
-extern void vcs_scr_updated(struct vc_data *vc);
+u16 vcs_scr_readw(const struct vc_data *vc, const u16 *org);
+void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org);
+void vcs_scr_updated(struct vc_data *vc);
-extern int vc_uniscr_check(struct vc_data *vc);
-extern void vc_uniscr_copy_line(const struct vc_data *vc, void *dest,
- bool viewed,
- unsigned int row, unsigned int col,
- unsigned int nr);
+int vc_uniscr_check(struct vc_data *vc);
+void vc_uniscr_copy_line(const struct vc_data *vc, void *dest, bool viewed,
+ unsigned int row, unsigned int col, unsigned int nr);
#endif
diff --git a/include/linux/serdev.h b/include/linux/serdev.h
index 3fab88b..ff78efc 100644
--- a/include/linux/serdev.h
+++ b/include/linux/serdev.h
@@ -27,7 +27,7 @@
* not sleep.
*/
struct serdev_device_ops {
- ssize_t (*receive_buf)(struct serdev_device *, const u8 *, size_t);
+ size_t (*receive_buf)(struct serdev_device *, const u8 *, size_t);
void (*write_wakeup)(struct serdev_device *);
};
@@ -185,9 +185,9 @@
serdev->ops->write_wakeup(serdev);
}
-static inline ssize_t serdev_controller_receive_buf(struct serdev_controller *ctrl,
- const u8 *data,
- size_t count)
+static inline size_t serdev_controller_receive_buf(struct serdev_controller *ctrl,
+ const u8 *data,
+ size_t count)
{
struct serdev_device *serdev = ctrl->serdev;
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index be65de65..fd59ed2 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -210,6 +210,12 @@
void serial8250_set_isa_configurator(void (*v)(int port, struct uart_port *up,
u32 *capabilities));
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+extern int hp300_setup_serial_console(void) __init;
+#else
+static inline int hp300_setup_serial_console(void) { return 0; }
+#endif
+
#ifdef CONFIG_SERIAL_8250_RT288X
int rt288x_setup(struct uart_port *p);
int au_platform_setup(struct plat_serial8250_port *p);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 55b1f3b..0a0f6e2 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -467,9 +467,10 @@
unsigned int fifosize; /* tx fifo size */
unsigned char x_char; /* xon/xoff char */
unsigned char regshift; /* reg offset shift */
- unsigned char iotype; /* io access style */
- unsigned char quirks; /* internal quirks */
+ unsigned char iotype; /* io access style */
+
+#define UPIO_UNKNOWN ((unsigned char)~0U) /* UCHAR_MAX */
#define UPIO_PORT (SERIAL_IO_PORT) /* 8b I/O port access */
#define UPIO_HUB6 (SERIAL_IO_HUB6) /* Hub6 ISA card */
#define UPIO_MEM (SERIAL_IO_MEM) /* driver-specific */
@@ -479,7 +480,9 @@
#define UPIO_MEM32BE (SERIAL_IO_MEM32BE) /* 32b big endian */
#define UPIO_MEM16 (SERIAL_IO_MEM16) /* 16b little endian */
- /* quirks must be updated while holding port mutex */
+ unsigned char quirks; /* internal quirks */
+
+ /* internal quirks must be updated while holding port mutex */
#define UPQ_NO_TXEN_TEST BIT(0)
unsigned int read_status_mask; /* driver specific */
@@ -786,7 +789,8 @@
if (pending < WAKEUP_CHARS) { \
uart_write_wakeup(__port); \
\
- if (!((flags) & UART_TX_NOSTOP) && pending == 0) \
+ if (!((flags) & UART_TX_NOSTOP) && pending == 0 && \
+ __port->ops->tx_empty(__port)) \
__port->ops->stop_tx(__port); \
} \
\
@@ -959,6 +963,8 @@
void uart_unregister_driver(struct uart_driver *uart);
int uart_add_one_port(struct uart_driver *reg, struct uart_port *port);
void uart_remove_one_port(struct uart_driver *reg, struct uart_port *port);
+int uart_read_port_properties(struct uart_port *port);
+int uart_read_and_validate_port_properties(struct uart_port *port);
bool uart_match_port(const struct uart_port *port1,
const struct uart_port *port2);
diff --git a/include/linux/soc/qcom/geni-se.h b/include/linux/soc/qcom/geni-se.h
index 29e0690..0f038a1 100644
--- a/include/linux/soc/qcom/geni-se.h
+++ b/include/linux/soc/qcom/geni-se.h
@@ -178,6 +178,7 @@
#define M_GP_IRQ_3_EN BIT(12)
#define M_GP_IRQ_4_EN BIT(13)
#define M_GP_IRQ_5_EN BIT(14)
+#define M_TX_FIFO_NOT_EMPTY_EN BIT(21)
#define M_IO_DATA_DEASSERT_EN BIT(22)
#define M_IO_DATA_ASSERT_EN BIT(23)
#define M_RX_FIFO_RD_ERR_EN BIT(24)
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 8c76fd9..2b2e6f0 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -6,7 +6,6 @@
#include <linux/major.h>
#include <linux/termios.h>
#include <linux/workqueue.h>
-#include <linux/tty_buffer.h>
#include <linux/tty_driver.h>
#include <linux/tty_ldisc.h>
#include <linux/tty_port.h>
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index c1f5aeb..d008c3d 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -25,7 +25,8 @@
int vc_allocate(unsigned int console);
int vc_cons_allocated(unsigned int console);
-int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines);
+int __vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines,
+ bool from_user);
struct vc_data *vc_deallocate(unsigned int console);
void reset_palette(struct vc_data *vc);
void do_blank_screen(int entering_gfx);
@@ -42,6 +43,12 @@
#define update_screen(x) redraw_screen(x, 0)
#define switch_screen(x) redraw_screen(x, 1)
+static inline int vc_resize(struct vc_data *vc, unsigned int cols,
+ unsigned int lines)
+{
+ return __vc_resize(vc, cols, lines, false);
+}
+
struct tty_struct;
int tioclinux(struct tty_struct *tty, unsigned long arg);
@@ -168,7 +175,4 @@
void vt_kbd_con_start(unsigned int console);
void vt_kbd_con_stop(unsigned int console);
-void vc_scrolldelta_helper(struct vc_data *c, int lines,
- unsigned int rolled_over, void *_base, unsigned int size);
-
#endif /* _VT_KERN_H */
diff --git a/include/uapi/linux/fb.h b/include/uapi/linux/fb.h
index 3a49913..cde8f17 100644
--- a/include/uapi/linux/fb.h
+++ b/include/uapi/linux/fb.h
@@ -4,6 +4,7 @@
#include <linux/types.h>
#include <linux/i2c.h>
+#include <linux/vesa.h>
/* Definitions of frame buffers */
@@ -293,13 +294,6 @@
__u32 framebuffer;
};
-/* VESA Blanking Levels */
-#define VESA_NO_BLANKING 0
-#define VESA_VSYNC_SUSPEND 1
-#define VESA_HSYNC_SUSPEND 2
-#define VESA_POWERDOWN 3
-
-
enum {
/* screen: unblanked, hsync: on, vsync: on */
FB_BLANK_UNBLANK = VESA_NO_BLANKING,
diff --git a/include/uapi/linux/vesa.h b/include/uapi/linux/vesa.h
new file mode 100644
index 0000000..81947f5
--- /dev/null
+++ b/include/uapi/linux/vesa.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_VESA_H
+#define _UAPI_LINUX_VESA_H
+
+/* VESA Blanking Levels */
+enum vesa_blank_mode {
+ VESA_NO_BLANKING = 0,
+#define VESA_NO_BLANKING VESA_NO_BLANKING
+ VESA_VSYNC_SUSPEND = 1,
+#define VESA_VSYNC_SUSPEND VESA_VSYNC_SUSPEND
+ VESA_HSYNC_SUSPEND = 2,
+#define VESA_HSYNC_SUSPEND VESA_HSYNC_SUSPEND
+ VESA_POWERDOWN = VESA_VSYNC_SUSPEND | VESA_HSYNC_SUSPEND,
+#define VESA_POWERDOWN VESA_POWERDOWN
+ VESA_BLANK_MAX = VESA_POWERDOWN,
+};
+
+#endif
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index a000bef5..ca514600 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -3269,6 +3269,21 @@
early_param("keep_bootcon", keep_bootcon_setup);
+static int console_call_setup(struct console *newcon, char *options)
+{
+ int err;
+
+ if (!newcon->setup)
+ return 0;
+
+ /* Synchronize with possible boot console. */
+ console_lock();
+ err = newcon->setup(newcon, options);
+ console_unlock();
+
+ return err;
+}
+
/*
* This is called by register_console() to try to match
* the newly registered console with any of the ones selected
@@ -3304,8 +3319,8 @@
if (_braille_register_console(newcon, c))
return 0;
- if (newcon->setup &&
- (err = newcon->setup(newcon, c->options)) != 0)
+ err = console_call_setup(newcon, c->options);
+ if (err)
return err;
}
newcon->flags |= CON_ENABLED;
@@ -3331,7 +3346,7 @@
if (newcon->index < 0)
newcon->index = 0;
- if (newcon->setup && newcon->setup(newcon, NULL) != 0)
+ if (console_call_setup(newcon, NULL) != 0)
return;
newcon->flags |= CON_ENABLED;
diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb
index 3b9a440..b5c0e65 100644
--- a/lib/Kconfig.kgdb
+++ b/lib/Kconfig.kgdb
@@ -43,7 +43,7 @@
tristate "KGDB: use kgdb over the serial console"
select CONSOLE_POLL
select MAGIC_SYSRQ
- depends on TTY && HW_CONSOLE
+ depends on TTY && VT
default y
help
Share a serial console with kgdb. Sysrq-g must be used
diff --git a/sound/drivers/serial-generic.c b/sound/drivers/serial-generic.c
index d6e5aaf..36409a5 100644
--- a/sound/drivers/serial-generic.c
+++ b/sound/drivers/serial-generic.c
@@ -100,8 +100,8 @@
snd_serial_generic_tx_wakeup(drvdata);
}
-static ssize_t snd_serial_generic_receive_buf(struct serdev_device *serdev,
- const u8 *buf, size_t count)
+static size_t snd_serial_generic_receive_buf(struct serdev_device *serdev,
+ const u8 *buf, size_t count)
{
int ret;
struct snd_serial_generic *drvdata = serdev_device_get_drvdata(serdev);
