| TI ADC128D818 ADC System Monitor With Temperature Sensor |
| -------------------------------------------------------- |
| |
| Operation modes: |
| |
| - Mode 0: 7 single-ended voltage readings (IN0-IN6), |
| 1 temperature reading (internal) |
| - Mode 1: 8 single-ended voltage readings (IN0-IN7), |
| no temperature |
| - Mode 2: 4 pseudo-differential voltage readings |
| (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6), |
| 1 temperature reading (internal) |
| - Mode 3: 4 single-ended voltage readings (IN0-IN3), |
| 2 pseudo-differential voltage readings |
| (IN4-IN5, IN7-IN6), |
| 1 temperature reading (internal) |
| |
| If no operation mode is configured via device tree, the driver keeps the |
| currently active chip operation mode (default is mode 0). |
| |
| |
| Required node properties: |
| |
| - compatible: must be set to "ti,adc128d818" |
| - reg: I2C address of the device |
| |
| Optional node properties: |
| |
| - ti,mode: Operation mode (u8) (see above). |
| |
| |
| Example (operation mode 2): |
| |
| adc128d818@1d { |
| compatible = "ti,adc128d818"; |
| reg = <0x1d>; |
| ti,mode = /bits/ 8 <2>; |
| }; |
