blob: f9170b4b22e7e8991f506f998bd24924212900d4 [file] [log] [blame]
/*
* Copyright (C) 2014 Red Hat
* Copyright (C) 2014 Intel Corp.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors:
* Rob Clark <robdclark@gmail.com>
* Daniel Vetter <daniel.vetter@ffwll.ch>
*/
#include <linux/dma-fence.h>
#include <linux/ktime.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_atomic_uapi.h>
#include <drm/drm_bridge.h>
#include <drm/drm_damage_helper.h>
#include <drm/drm_device.h>
#include <drm/drm_drv.h>
#include <drm/drm_plane_helper.h>
#include <drm/drm_print.h>
#include <drm/drm_self_refresh_helper.h>
#include <drm/drm_vblank.h>
#include <drm/drm_writeback.h>
#include "drm_crtc_helper_internal.h"
#include "drm_crtc_internal.h"
/**
* DOC: overview
*
* This helper library provides implementations of check and commit functions on
* top of the CRTC modeset helper callbacks and the plane helper callbacks. It
* also provides convenience implementations for the atomic state handling
* callbacks for drivers which don't need to subclass the drm core structures to
* add their own additional internal state.
*
* This library also provides default implementations for the check callback in
* drm_atomic_helper_check() and for the commit callback with
* drm_atomic_helper_commit(). But the individual stages and callbacks are
* exposed to allow drivers to mix and match and e.g. use the plane helpers only
* together with a driver private modeset implementation.
*
* This library also provides implementations for all the legacy driver
* interfaces on top of the atomic interface. See drm_atomic_helper_set_config(),
* drm_atomic_helper_disable_plane(), drm_atomic_helper_disable_plane() and the
* various functions to implement set_property callbacks. New drivers must not
* implement these functions themselves but must use the provided helpers.
*
* The atomic helper uses the same function table structures as all other
* modesetting helpers. See the documentation for &struct drm_crtc_helper_funcs,
* struct &drm_encoder_helper_funcs and &struct drm_connector_helper_funcs. It
* also shares the &struct drm_plane_helper_funcs function table with the plane
* helpers.
*/
static void
drm_atomic_helper_plane_changed(struct drm_atomic_state *state,
struct drm_plane_state *old_plane_state,
struct drm_plane_state *plane_state,
struct drm_plane *plane)
{
struct drm_crtc_state *crtc_state;
if (old_plane_state->crtc) {
crtc_state = drm_atomic_get_new_crtc_state(state,
old_plane_state->crtc);
if (WARN_ON(!crtc_state))
return;
crtc_state->planes_changed = true;
}
if (plane_state->crtc) {
crtc_state = drm_atomic_get_new_crtc_state(state, plane_state->crtc);
if (WARN_ON(!crtc_state))
return;
crtc_state->planes_changed = true;
}
}
static int handle_conflicting_encoders(struct drm_atomic_state *state,
bool disable_conflicting_encoders)
{
struct drm_connector_state *new_conn_state;
struct drm_connector *connector;
struct drm_connector_list_iter conn_iter;
struct drm_encoder *encoder;
unsigned encoder_mask = 0;
int i, ret = 0;
/*
* First loop, find all newly assigned encoders from the connectors
* part of the state. If the same encoder is assigned to multiple
* connectors bail out.
*/
for_each_new_connector_in_state(state, connector, new_conn_state, i) {
const struct drm_connector_helper_funcs *funcs = connector->helper_private;
struct drm_encoder *new_encoder;
if (!new_conn_state->crtc)
continue;
if (funcs->atomic_best_encoder)
new_encoder = funcs->atomic_best_encoder(connector, new_conn_state);
else if (funcs->best_encoder)
new_encoder = funcs->best_encoder(connector);
else
new_encoder = drm_connector_get_single_encoder(connector);
if (new_encoder) {
if (encoder_mask & drm_encoder_mask(new_encoder)) {
DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] on [CONNECTOR:%d:%s] already assigned\n",
new_encoder->base.id, new_encoder->name,
connector->base.id, connector->name);
return -EINVAL;
}
encoder_mask |= drm_encoder_mask(new_encoder);
}
}
if (!encoder_mask)
return 0;
/*
* Second loop, iterate over all connectors not part of the state.
*
* If a conflicting encoder is found and disable_conflicting_encoders
* is not set, an error is returned. Userspace can provide a solution
* through the atomic ioctl.
*
* If the flag is set conflicting connectors are removed from the CRTC
* and the CRTC is disabled if no encoder is left. This preserves
* compatibility with the legacy set_config behavior.
*/
drm_connector_list_iter_begin(state->dev, &conn_iter);
drm_for_each_connector_iter(connector, &conn_iter) {
struct drm_crtc_state *crtc_state;
if (drm_atomic_get_new_connector_state(state, connector))
continue;
encoder = connector->state->best_encoder;
if (!encoder || !(encoder_mask & drm_encoder_mask(encoder)))
continue;
if (!disable_conflicting_encoders) {
DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] in use on [CRTC:%d:%s] by [CONNECTOR:%d:%s]\n",
encoder->base.id, encoder->name,
connector->state->crtc->base.id,
connector->state->crtc->name,
connector->base.id, connector->name);
ret = -EINVAL;
goto out;
}
new_conn_state = drm_atomic_get_connector_state(state, connector);
if (IS_ERR(new_conn_state)) {
ret = PTR_ERR(new_conn_state);
goto out;
}
DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] in use on [CRTC:%d:%s], disabling [CONNECTOR:%d:%s]\n",
encoder->base.id, encoder->name,
new_conn_state->crtc->base.id, new_conn_state->crtc->name,
connector->base.id, connector->name);
crtc_state = drm_atomic_get_new_crtc_state(state, new_conn_state->crtc);
ret = drm_atomic_set_crtc_for_connector(new_conn_state, NULL);
if (ret)
goto out;
if (!crtc_state->connector_mask) {
ret = drm_atomic_set_mode_prop_for_crtc(crtc_state,
NULL);
if (ret < 0)
goto out;
crtc_state->active = false;
}
}
out:
drm_connector_list_iter_end(&conn_iter);
return ret;
}
static void
set_best_encoder(struct drm_atomic_state *state,
struct drm_connector_state *conn_state,
struct drm_encoder *encoder)
{
struct drm_crtc_state *crtc_state;
struct drm_crtc *crtc;
if (conn_state->best_encoder) {
/* Unset the encoder_mask in the old crtc state. */
crtc = conn_state->connector->state->crtc;
/* A NULL crtc is an error here because we should have
* duplicated a NULL best_encoder when crtc was NULL.
* As an exception restoring duplicated atomic state
* during resume is allowed, so don't warn when
* best_encoder is equal to encoder we intend to set.
*/
WARN_ON(!crtc && encoder != conn_state->best_encoder);
if (crtc) {
crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
crtc_state->encoder_mask &=
~drm_encoder_mask(conn_state->best_encoder);
}
}
if (encoder) {
crtc = conn_state->crtc;
WARN_ON(!crtc);
if (crtc) {
crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
crtc_state->encoder_mask |=
drm_encoder_mask(encoder);
}
}
conn_state->best_encoder = encoder;
}
static void
steal_encoder(struct drm_atomic_state *state,
struct drm_encoder *encoder)
{
struct drm_crtc_state *crtc_state;
struct drm_connector *connector;
struct drm_connector_state *old_connector_state, *new_connector_state;
int i;
for_each_oldnew_connector_in_state(state, connector, old_connector_state, new_connector_state, i) {
struct drm_crtc *encoder_crtc;
if (new_connector_state->best_encoder != encoder)
continue;
encoder_crtc = old_connector_state->crtc;
DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] in use on [CRTC:%d:%s], stealing it\n",
encoder->base.id, encoder->name,
encoder_crtc->base.id, encoder_crtc->name);
set_best_encoder(state, new_connector_state, NULL);
crtc_state = drm_atomic_get_new_crtc_state(state, encoder_crtc);
crtc_state->connectors_changed = true;
return;
}
}
static int
update_connector_routing(struct drm_atomic_state *state,
struct drm_connector *connector,
struct drm_connector_state *old_connector_state,
struct drm_connector_state *new_connector_state)
{
const struct drm_connector_helper_funcs *funcs;
struct drm_encoder *new_encoder;
struct drm_crtc_state *crtc_state;
DRM_DEBUG_ATOMIC("Updating routing for [CONNECTOR:%d:%s]\n",
connector->base.id,
connector->name);
if (old_connector_state->crtc != new_connector_state->crtc) {
if (old_connector_state->crtc) {
crtc_state = drm_atomic_get_new_crtc_state(state, old_connector_state->crtc);
crtc_state->connectors_changed = true;
}
if (new_connector_state->crtc) {
crtc_state = drm_atomic_get_new_crtc_state(state, new_connector_state->crtc);
crtc_state->connectors_changed = true;
}
}
if (!new_connector_state->crtc) {
DRM_DEBUG_ATOMIC("Disabling [CONNECTOR:%d:%s]\n",
connector->base.id,
connector->name);
set_best_encoder(state, new_connector_state, NULL);
return 0;
}
crtc_state = drm_atomic_get_new_crtc_state(state,
new_connector_state->crtc);
/*
* For compatibility with legacy users, we want to make sure that
* we allow DPMS On->Off modesets on unregistered connectors. Modesets
* which would result in anything else must be considered invalid, to
* avoid turning on new displays on dead connectors.
*
* Since the connector can be unregistered at any point during an
* atomic check or commit, this is racy. But that's OK: all we care
* about is ensuring that userspace can't do anything but shut off the
* display on a connector that was destroyed after it's been notified,
* not before.
*
* Additionally, we also want to ignore connector registration when
* we're trying to restore an atomic state during system resume since
* there's a chance the connector may have been destroyed during the
* process, but it's better to ignore that then cause
* drm_atomic_helper_resume() to fail.
*/
if (!state->duplicated && drm_connector_is_unregistered(connector) &&
crtc_state->active) {
DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] is not registered\n",
connector->base.id, connector->name);
return -EINVAL;
}
funcs = connector->helper_private;
if (funcs->atomic_best_encoder)
new_encoder = funcs->atomic_best_encoder(connector,
new_connector_state);
else if (funcs->best_encoder)
new_encoder = funcs->best_encoder(connector);
else
new_encoder = drm_connector_get_single_encoder(connector);
if (!new_encoder) {
DRM_DEBUG_ATOMIC("No suitable encoder found for [CONNECTOR:%d:%s]\n",
connector->base.id,
connector->name);
return -EINVAL;
}
if (!drm_encoder_crtc_ok(new_encoder, new_connector_state->crtc)) {
DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] incompatible with [CRTC:%d:%s]\n",
new_encoder->base.id,
new_encoder->name,
new_connector_state->crtc->base.id,
new_connector_state->crtc->name);
return -EINVAL;
}
if (new_encoder == new_connector_state->best_encoder) {
set_best_encoder(state, new_connector_state, new_encoder);
DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] keeps [ENCODER:%d:%s], now on [CRTC:%d:%s]\n",
connector->base.id,
connector->name,
new_encoder->base.id,
new_encoder->name,
new_connector_state->crtc->base.id,
new_connector_state->crtc->name);
return 0;
}
steal_encoder(state, new_encoder);
set_best_encoder(state, new_connector_state, new_encoder);
crtc_state->connectors_changed = true;
DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] using [ENCODER:%d:%s] on [CRTC:%d:%s]\n",
connector->base.id,
connector->name,
new_encoder->base.id,
new_encoder->name,
new_connector_state->crtc->base.id,
new_connector_state->crtc->name);
return 0;
}
static int
mode_fixup(struct drm_atomic_state *state)
{
struct drm_crtc *crtc;
struct drm_crtc_state *new_crtc_state;
struct drm_connector *connector;
struct drm_connector_state *new_conn_state;
int i;
int ret;
for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) {
if (!new_crtc_state->mode_changed &&
!new_crtc_state->connectors_changed)
continue;
drm_mode_copy(&new_crtc_state->adjusted_mode, &new_crtc_state->mode);
}
for_each_new_connector_in_state(state, connector, new_conn_state, i) {
const struct drm_encoder_helper_funcs *funcs;
struct drm_encoder *encoder;
struct drm_bridge *bridge;
WARN_ON(!!new_conn_state->best_encoder != !!new_conn_state->crtc);
if (!new_conn_state->crtc || !new_conn_state->best_encoder)
continue;
new_crtc_state =
drm_atomic_get_new_crtc_state(state, new_conn_state->crtc);
/*
* Each encoder has at most one connector (since we always steal
* it away), so we won't call ->mode_fixup twice.
*/
encoder = new_conn_state->best_encoder;
funcs = encoder->helper_private;
bridge = drm_bridge_chain_get_first_bridge(encoder);
ret = drm_atomic_bridge_chain_check(bridge,
new_crtc_state,
new_conn_state);
if (ret) {
DRM_DEBUG_ATOMIC("Bridge atomic check failed\n");
return ret;
}
if (funcs && funcs->atomic_check) {
ret = funcs->atomic_check(encoder, new_crtc_state,
new_conn_state);
if (ret) {
DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] check failed\n",
encoder->base.id, encoder->name);
return ret;
}
} else if (funcs && funcs->mode_fixup) {
ret = funcs->mode_fixup(encoder, &new_crtc_state->mode,
&new_crtc_state->adjusted_mode);
if (!ret) {
DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] fixup failed\n",
encoder->base.id, encoder->name);
return -EINVAL;
}
}
}
for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) {
const struct drm_crtc_helper_funcs *funcs;
if (!new_crtc_state->enable)
continue;
if (!new_crtc_state->mode_changed &&
!new_crtc_state->connectors_changed)
continue;
funcs = crtc->helper_private;
if (!funcs || !funcs->mode_fixup)
continue;
ret = funcs->mode_fixup(crtc, &new_crtc_state->mode,
&new_crtc_state->adjusted_mode);
if (!ret) {
DRM_DEBUG_ATOMIC("[CRTC:%d:%s] fixup failed\n",
crtc->base.id, crtc->name);
return -EINVAL;
}
}
return 0;
}
static enum drm_mode_status mode_valid_path(struct drm_connector *connector,
struct drm_encoder *encoder,
struct drm_crtc *crtc,
const struct drm_display_mode *mode)
{
struct drm_bridge *bridge;
enum drm_mode_status ret;
ret = drm_encoder_mode_valid(encoder, mode);
if (ret != MODE_OK) {
DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] mode_valid() failed\n",
encoder->base.id, encoder->name);
return ret;
}
bridge = drm_bridge_chain_get_first_bridge(encoder);
ret = drm_bridge_chain_mode_valid(bridge, &connector->display_info,
mode);
if (ret != MODE_OK) {
DRM_DEBUG_ATOMIC("[BRIDGE] mode_valid() failed\n");
return ret;
}
ret = drm_crtc_mode_valid(crtc, mode);
if (ret != MODE_OK) {
DRM_DEBUG_ATOMIC("[CRTC:%d:%s] mode_valid() failed\n",
crtc->base.id, crtc->name);
return ret;
}
return ret;
}
static int
mode_valid(struct drm_atomic_state *state)
{
struct drm_connector_state *conn_state;
struct drm_connector *connector;
int i;
for_each_new_connector_in_state(state, connector, conn_state, i) {
struct drm_encoder *encoder = conn_state->best_encoder;
struct drm_crtc *crtc = conn_state->crtc;
struct drm_crtc_state *crtc_state;
enum drm_mode_status mode_status;
const struct drm_display_mode *mode;
if (!crtc || !encoder)
continue;
crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
if (!crtc_state)
continue;
if (!crtc_state->mode_changed && !crtc_state->connectors_changed)
continue;
mode = &crtc_state->mode;
mode_status = mode_valid_path(connector, encoder, crtc, mode);
if (mode_status != MODE_OK)
return -EINVAL;
}
return 0;
}
/**
* drm_atomic_helper_check_modeset - validate state object for modeset changes
* @dev: DRM device
* @state: the driver state object
*
* Check the state object to see if the requested state is physically possible.
* This does all the CRTC and connector related computations for an atomic
* update and adds any additional connectors needed for full modesets. It calls
* the various per-object callbacks in the follow order:
*
* 1. &drm_connector_helper_funcs.atomic_best_encoder for determining the new encoder.
* 2. &drm_connector_helper_funcs.atomic_check to validate the connector state.
* 3. If it's determined a modeset is needed then all connectors on the affected
* CRTC are added and &drm_connector_helper_funcs.atomic_check is run on them.
* 4. &drm_encoder_helper_funcs.mode_valid, &drm_bridge_funcs.mode_valid and
* &drm_crtc_helper_funcs.mode_valid are called on the affected components.
* 5. &drm_bridge_funcs.mode_fixup is called on all encoder bridges.
* 6. &drm_encoder_helper_funcs.atomic_check is called to validate any encoder state.
* This function is only called when the encoder will be part of a configured CRTC,
* it must not be used for implementing connector property validation.
* If this function is NULL, &drm_atomic_encoder_helper_funcs.mode_fixup is called
* instead.
* 7. &drm_crtc_helper_funcs.mode_fixup is called last, to fix up the mode with CRTC constraints.
*
* &drm_crtc_state.mode_changed is set when the input mode is changed.
* &drm_crtc_state.connectors_changed is set when a connector is added or
* removed from the CRTC. &drm_crtc_state.active_changed is set when
* &drm_crtc_state.active changes, which is used for DPMS.
* &drm_crtc_state.no_vblank is set from the result of drm_dev_has_vblank().
* See also: drm_atomic_crtc_needs_modeset()
*
* IMPORTANT:
*
* Drivers which set &drm_crtc_state.mode_changed (e.g. in their
* &drm_plane_helper_funcs.atomic_check hooks if a plane update can't be done
* without a full modeset) _must_ call this function afterwards after that
* change. It is permitted to call this function multiple times for the same
* update, e.g. when the &drm_crtc_helper_funcs.atomic_check functions depend
* upon the adjusted dotclock for fifo space allocation and watermark
* computation.
*
* RETURNS:
* Zero for success or -errno
*/
int
drm_atomic_helper_check_modeset(struct drm_device *dev,
struct drm_atomic_state *state)
{
struct drm_crtc *crtc;
struct drm_crtc_state *old_crtc_state, *new_crtc_state;
struct drm_connector *connector;
struct drm_connector_state *old_connector_state, *new_connector_state;
int i, ret;
unsigned connectors_mask = 0;
for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
bool has_connectors =
!!new_crtc_state->connector_mask;
WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
if (!drm_mode_equal(&old_crtc_state->mode, &new_crtc_state->mode)) {
DRM_DEBUG_ATOMIC("[CRTC:%d:%s] mode changed\n",
crtc->base.id, crtc->name);
new_crtc_state->mode_changed = true;
}
if (old_crtc_state->enable != new_crtc_state->enable) {
DRM_DEBUG_ATOMIC("[CRTC:%d:%s] enable changed\n",
crtc->base.id, crtc->name);
/*
* For clarity this assignment is done here, but
* enable == 0 is only true when there are no
* connectors and a NULL mode.
*
* The other way around is true as well. enable != 0
* iff connectors are attached and a mode is set.
*/
new_crtc_state->mode_changed = true;
new_crtc_state->connectors_changed = true;
}
if (old_crtc_state->active != new_crtc_state->active) {
DRM_DEBUG_ATOMIC("[CRTC:%d:%s] active changed\n",
crtc->base.id, crtc->name);
new_crtc_state->active_changed = true;
}
if (new_crtc_state->enable != has_connectors) {
DRM_DEBUG_ATOMIC("[CRTC:%d:%s] enabled/connectors mismatch\n",
crtc->base.id, crtc->name);
return -EINVAL;
}
if (drm_dev_has_vblank(dev))
new_crtc_state->no_vblank = false;
else
new_crtc_state->no_vblank = true;
}
ret = handle_conflicting_encoders(state, false);
if (ret)
return ret;
for_each_oldnew_connector_in_state(state, connector, old_connector_state, new_connector_state, i) {
const struct drm_connector_helper_funcs *funcs = connector->helper_private;
WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
/*
* This only sets crtc->connectors_changed for routing changes,
* drivers must set crtc->connectors_changed themselves when
* connector properties need to be updated.
*/
ret = update_connector_routing(state, connector,
old_connector_state,
new_connector_state);
if (ret)
return ret;
if (old_connector_state->crtc) {
new_crtc_state = drm_atomic_get_new_crtc_state(state,
old_connector_state->crtc);
if (old_connector_state->link_status !=
new_connector_state->link_status)
new_crtc_state->connectors_changed = true;
if (old_connector_state->max_requested_bpc !=
new_connector_state->max_requested_bpc)
new_crtc_state->connectors_changed = true;
}
if (funcs->atomic_check)
ret = funcs->atomic_check(connector, state);
if (ret)
return ret;
connectors_mask |= BIT(i);
}
/*
* After all the routing has been prepared we need to add in any
* connector which is itself unchanged, but whose CRTC changes its
* configuration. This must be done before calling mode_fixup in case a
* crtc only changed its mode but has the same set of connectors.
*/
for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
if (!drm_atomic_crtc_needs_modeset(new_crtc_state))
continue;
DRM_DEBUG_ATOMIC("[CRTC:%d:%s] needs all connectors, enable: %c, active: %c\n",
crtc->base.id, crtc->name,
new_crtc_state->enable ? 'y' : 'n',
new_crtc_state->active ? 'y' : 'n');
ret = drm_atomic_add_affected_connectors(state, crtc);
if (ret != 0)
return ret;
ret = drm_atomic_add_affected_planes(state, crtc);
if (ret != 0)
return ret;
}
/*
* Iterate over all connectors again, to make sure atomic_check()
* has been called on them when a modeset is forced.
*/
for_each_oldnew_connector_in_state(state, connector, old_connector_state, new_connector_state, i) {
const struct drm_connector_helper_funcs *funcs = connector->helper_private;
if (connectors_mask & BIT(i))
continue;
if (funcs->atomic_check)
ret = funcs->atomic_check(connector, state);
if (ret)
return ret;
}
/*
* Iterate over all connectors again, and add all affected bridges to
* the state.
*/
for_each_oldnew_connector_in_state(state, connector,
old_connector_state,
new_connector_state, i) {
struct drm_encoder *encoder;
encoder = old_connector_state->best_encoder;
ret = drm_atomic_add_encoder_bridges(state, encoder);
if (ret)
return ret;
encoder = new_connector_state->best_encoder;
ret = drm_atomic_add_encoder_bridges(state, encoder);
if (ret)
return ret;
}
ret = mode_valid(state);
if (ret)
return ret;
return mode_fixup(state);
}
EXPORT_SYMBOL(drm_atomic_helper_check_modeset);
/**
* drm_atomic_helper_check_plane_state() - Check plane state for validity
* @plane_state: plane state to check
* @crtc_state: CRTC state to check
* @min_scale: minimum @src:@dest scaling factor in 16.16 fixed point
* @max_scale: maximum @src:@dest scaling factor in 16.16 fixed point
* @can_position: is it legal to position the plane such that it
* doesn't cover the entire CRTC? This will generally
* only be false for primary planes.
* @can_update_disabled: can the plane be updated while the CRTC
* is disabled?
*
* Checks that a desired plane update is valid, and updates various
* bits of derived state (clipped coordinates etc.). Drivers that provide
* their own plane handling rather than helper-provided implementations may
* still wish to call this function to avoid duplication of error checking
* code.
*
* RETURNS:
* Zero if update appears valid, error code on failure
*/
int drm_atomic_helper_check_plane_state(struct drm_plane_state *plane_state,
const struct drm_crtc_state *crtc_state,
int min_scale,
int max_scale,
bool can_position,
bool can_update_disabled)
{
struct drm_framebuffer *fb = plane_state->fb;
struct drm_rect *src = &plane_state->src;
struct drm_rect *dst = &plane_state->dst;
unsigned int rotation = plane_state->rotation;
struct drm_rect clip = {};
int hscale, vscale;
WARN_ON(plane_state->crtc && plane_state->crtc != crtc_state->crtc);
*src = drm_plane_state_src(plane_state);
*dst = drm_plane_state_dest(plane_state);
if (!fb) {
plane_state->visible = false;
return 0;
}
/* crtc should only be NULL when disabling (i.e., !fb) */
if (WARN_ON(!plane_state->crtc)) {
plane_state->visible = false;
return 0;
}
if (!crtc_state->enable && !can_update_disabled) {
DRM_DEBUG_KMS("Cannot update plane of a disabled CRTC.\n");
return -EINVAL;
}
drm_rect_rotate(src, fb->width << 16, fb->height << 16, rotation);
/* Check scaling */
hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale);
vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale);
if (hscale < 0 || vscale < 0) {
DRM_DEBUG_KMS("Invalid scaling of plane\n");
drm_rect_debug_print("src: ", &plane_state->src, true);
drm_rect_debug_print("dst: ", &plane_state->dst, false);
return -ERANGE;
}
if (crtc_state->enable)
drm_mode_get_hv_timing(&crtc_state->mode, &clip.x2, &clip.y2);
plane_state->visible = drm_rect_clip_scaled(src, dst, &clip);
drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16, rotation);
if (!plane_state->visible)
/*
* Plane isn't visible; some drivers can handle this
* so we just return success here. Drivers that can't
* (including those that use the primary plane helper's
* update function) will return an error from their
* update_plane handler.
*/
return 0;
if (!can_position && !drm_rect_equals(dst, &clip)) {
DRM_DEBUG_KMS("Plane must cover entire CRTC\n");
drm_rect_debug_print("dst: ", dst, false);
drm_rect_debug_print("clip: ", &clip, false);
return -EINVAL;
}
return 0;
}
EXPORT_SYMBOL(drm_atomic_helper_check_plane_state);
/**
* drm_atomic_helper_check_planes - validate state object for planes changes
* @dev: DRM device
* @state: the driver state object
*
* Check the state object to see if the requested state is physically possible.
* This does all the plane update related checks using by calling into the
* &drm_crtc_helper_funcs.atomic_check and &drm_plane_helper_funcs.atomic_check
* hooks provided by the driver.
*
* It also sets &drm_crtc_state.planes_changed to indicate that a CRTC has
* updated planes.
*
* RETURNS:
* Zero for success or -errno
*/
int
drm_atomic_helper_check_planes(struct drm_device *dev,
struct drm_atomic_state *state)
{
struct drm_crtc *crtc;
struct drm_crtc_state *new_crtc_state;
struct drm_plane *plane;
struct drm_plane_state *new_plane_state, *old_plane_state;
int i, ret = 0;
for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i) {
const struct drm_plane_helper_funcs *funcs;
WARN_ON(!drm_modeset_is_locked(&plane->mutex));
funcs = plane->helper_private;
drm_atomic_helper_plane_changed(state, old_plane_state, new_plane_state, plane);
drm_atomic_helper_check_plane_damage(state, new_plane_state);
if (!funcs || !funcs->atomic_check)
continue;
ret = funcs->atomic_check(plane, new_plane_state);
if (ret) {
DRM_DEBUG_ATOMIC("[PLANE:%d:%s] atomic driver check failed\n",
plane->base.id, plane->name);
return ret;
}
}
for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) {
const struct drm_crtc_helper_funcs *funcs;
funcs = crtc->helper_private;
if (!funcs || !funcs->atomic_check)
continue;
ret = funcs->atomic_check(crtc, new_crtc_state);
if (ret) {
DRM_DEBUG_ATOMIC("[CRTC:%d:%s] atomic driver check failed\n",
crtc->base.id, crtc->name);
return ret;
}
}
return ret;
}
EXPORT_SYMBOL(drm_atomic_helper_check_planes);
/**
* drm_atomic_helper_check - validate state object
* @dev: DRM device
* @state: the driver state object
*
* Check the state object to see if the requested state is physically possible.
* Only CRTCs and planes have check callbacks, so for any additional (global)
* checking that a driver needs it can simply wrap that around this function.
* Drivers without such needs can directly use this as their
* &drm_mode_config_funcs.atomic_check callback.
*
* This just wraps the two parts of the state checking for planes and modeset
* state in the default order: First it calls drm_atomic_helper_check_modeset()
* and then drm_atomic_helper_check_planes(). The assumption is that the
* @drm_plane_helper_funcs.atomic_check and @drm_crtc_helper_funcs.atomic_check
* functions depend upon an updated adjusted_mode.clock to e.g. properly compute
* watermarks.
*
* Note that zpos normalization will add all enable planes to the state which
* might not desired for some drivers.
* For example enable/disable of a cursor plane which have fixed zpos value
* would trigger all other enabled planes to be forced to the state change.
*
* RETURNS:
* Zero for success or -errno
*/
int drm_atomic_helper_check(struct drm_device *dev,
struct drm_atomic_state *state)
{
int ret;
ret = drm_atomic_helper_check_modeset(dev, state);
if (ret)
return ret;
if (dev->mode_config.normalize_zpos) {
ret = drm_atomic_normalize_zpos(dev, state);
if (ret)
return ret;
}
ret = drm_atomic_helper_check_planes(dev, state);
if (ret)
return ret;
if (state->legacy_cursor_update)
state->async_update = !drm_atomic_helper_async_check(dev, state);
drm_self_refresh_helper_alter_state(state);
return ret;
}
EXPORT_SYMBOL(drm_atomic_helper_check);
static bool
crtc_needs_disable(struct drm_crtc_state *old_state,
struct drm_crtc_state *new_state)
{
/*
* No new_state means the CRTC is off, so the only criteria is whether
* it's currently active or in self refresh mode.
*/
if (!new_state)
return drm_atomic_crtc_effectively_active(old_state);
/*
* We need to run through the crtc_funcs->disable() function if the CRTC
* is currently on, if it's transitioning to self refresh mode, or if
* it's in self refresh mode and needs to be fully disabled.
*/
return old_state->active ||
(old_state->self_refresh_active && !new_state->enable) ||
new_state->self_refresh_active;
}
static void
disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
{
struct drm_connector *connector;
struct drm_connector_state *old_conn_state, *new_conn_state;
struct drm_crtc *crtc;
struct drm_crtc_state *old_crtc_state, *new_crtc_state;
int i;
for_each_oldnew_connector_in_state(old_state, connector, old_conn_state, new_conn_state, i) {
const struct drm_encoder_helper_funcs *funcs;
struct drm_encoder *encoder;
struct drm_bridge *bridge;
/* Shut down everything that's in the changeset and currently
* still on. So need to check the old, saved state. */
if (!old_conn_state->crtc)
continue;
old_crtc_state = drm_atomic_get_old_crtc_state(old_state, old_conn_state->crtc);
if (new_conn_state->crtc)
new_crtc_state = drm_atomic_get_new_crtc_state(
old_state,
new_conn_state->crtc);
else
new_crtc_state = NULL;
if (!crtc_needs_disable(old_crtc_state, new_crtc_state) ||
!drm_atomic_crtc_needs_modeset(old_conn_state->crtc->state))
continue;
encoder = old_conn_state->best_encoder;
/* We shouldn't get this far if we didn't previously have
* an encoder.. but WARN_ON() rather than explode.
*/
if (WARN_ON(!encoder))
continue;
funcs = encoder->helper_private;
DRM_DEBUG_ATOMIC("disabling [ENCODER:%d:%s]\n",
encoder->base.id, encoder->name);
/*
* Each encoder has at most one connector (since we always steal
* it away), so we won't call disable hooks twice.
*/
bridge = drm_bridge_chain_get_first_bridge(encoder);
drm_atomic_bridge_chain_disable(bridge, old_state);
/* Right function depends upon target state. */
if (funcs) {
if (funcs->atomic_disable)
funcs->atomic_disable(encoder, old_state);
else if (new_conn_state->crtc && funcs->prepare)
funcs->prepare(encoder);
else if (funcs->disable)
funcs->disable(encoder);
else if (funcs->dpms)
funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
}
drm_atomic_bridge_chain_post_disable(bridge, old_state);
}
for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) {
const struct drm_crtc_helper_funcs *funcs;
int ret;
/* Shut down everything that needs a full modeset. */
if (!drm_atomic_crtc_needs_modeset(new_crtc_state))
continue;
if (!crtc_needs_disable(old_crtc_state, new_crtc_state))
continue;
funcs = crtc->helper_private;
DRM_DEBUG_ATOMIC("disabling [CRTC:%d:%s]\n",
crtc->base.id, crtc->name);
/* Right function depends upon target state. */
if (new_crtc_state->enable && funcs->prepare)
funcs->prepare(crtc);
else if (funcs->atomic_disable)
funcs->atomic_disable(crtc, old_crtc_state);
else if (funcs->disable)
funcs->disable(crtc);
else if (funcs->dpms)
funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
if (!drm_dev_has_vblank(dev))
continue;
ret = drm_crtc_vblank_get(crtc);
WARN_ONCE(ret != -EINVAL, "driver forgot to call drm_crtc_vblank_off()\n");
if (ret == 0)
drm_crtc_vblank_put(crtc);
}
}
/**
* drm_atomic_helper_update_legacy_modeset_state - update legacy modeset state
* @dev: DRM device
* @old_state: atomic state object with old state structures
*
* This function updates all the various legacy modeset state pointers in
* connectors, encoders and CRTCs.
*
* Drivers can use this for building their own atomic commit if they don't have
* a pure helper-based modeset implementation.
*
* Since these updates are not synchronized with lockings, only code paths
* called from &drm_mode_config_helper_funcs.atomic_commit_tail can look at the
* legacy state filled out by this helper. Defacto this means this helper and
* the legacy state pointers are only really useful for transitioning an
* existing driver to the atomic world.
*/
void
drm_atomic_helper_update_legacy_modeset_state(struct drm_device *dev,
struct drm_atomic_state *old_state)
{
struct drm_connector *connector;
struct drm_connector_state *old_conn_state, *new_conn_state;
struct drm_crtc *crtc;
struct drm_crtc_state *new_crtc_state;
int i;
/* clear out existing links and update dpms */
for_each_oldnew_connector_in_state(old_state, connector, old_conn_state, new_conn_state, i) {
if (connector->encoder) {
WARN_ON(!connector->encoder->crtc);
connector->encoder->crtc = NULL;
connector->encoder = NULL;
}
crtc = new_conn_state->crtc;
if ((!crtc && old_conn_state->crtc) ||
(crtc && drm_atomic_crtc_needs_modeset(crtc->state))) {
int mode = DRM_MODE_DPMS_OFF;
if (crtc && crtc->state->active)
mode = DRM_MODE_DPMS_ON;
connector->dpms = mode;
}
}
/* set new links */
for_each_new_connector_in_state(old_state, connector, new_conn_state, i) {
if (!new_conn_state->crtc)
continue;
if (WARN_ON(!new_conn_state->best_encoder))
continue;
connector->encoder = new_conn_state->best_encoder;
connector->encoder->crtc = new_conn_state->crtc;
}
/* set legacy state in the crtc structure */
for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i) {
struct drm_plane *primary = crtc->primary;
struct drm_plane_state *new_plane_state;
crtc->mode = new_crtc_state->mode;
crtc->enabled = new_crtc_state->enable;
new_plane_state =
drm_atomic_get_new_plane_state(old_state, primary);
if (new_plane_state && new_plane_state->crtc == crtc) {
crtc->x = new_plane_state->src_x >> 16;
crtc->y = new_plane_state->src_y >> 16;
}
}
}
EXPORT_SYMBOL(drm_atomic_helper_update_legacy_modeset_state);
/**
* drm_atomic_helper_calc_timestamping_constants - update vblank timestamping constants
* @state: atomic state object
*
* Updates the timestamping constants used for precise vblank timestamps
* by calling drm_calc_timestamping_constants() for all enabled crtcs in @state.
*/
void drm_atomic_helper_calc_timestamping_constants(struct drm_atomic_state *state)
{
struct drm_crtc_state *new_crtc_state;
struct drm_crtc *crtc;
int i;
for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) {
if (new_crtc_state->enable)
drm_calc_timestamping_constants(crtc,
&new_crtc_state->adjusted_mode);
}
}
EXPORT_SYMBOL(drm_atomic_helper_calc_timestamping_constants);
static void
crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *old_state)
{
struct drm_crtc *crtc;
struct drm_crtc_state *new_crtc_state;
struct drm_connector *connector;
struct drm_connector_state *new_conn_state;
int i;
for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i) {
const struct drm_crtc_helper_funcs *funcs;
if (!new_crtc_state->mode_changed)
continue;
funcs = crtc->helper_private;
if (new_crtc_state->enable && funcs->mode_set_nofb) {
DRM_DEBUG_ATOMIC("modeset on [CRTC:%d:%s]\n",
crtc->base.id, crtc->name);
funcs->mode_set_nofb(crtc);
}
}
for_each_new_connector_in_state(old_state, connector, new_conn_state, i) {
const struct drm_encoder_helper_funcs *funcs;
struct drm_encoder *encoder;
struct drm_display_mode *mode, *adjusted_mode;
struct drm_bridge *bridge;
if (!new_conn_state->best_encoder)
continue;
encoder = new_conn_state->best_encoder;
funcs = encoder->helper_private;
new_crtc_state = new_conn_state->crtc->state;
mode = &new_crtc_state->mode;
adjusted_mode = &new_crtc_state->adjusted_mode;
if (!new_crtc_state->mode_changed)
continue;
DRM_DEBUG_ATOMIC("modeset on [ENCODER:%d:%s]\n",
encoder->base.id, encoder->name);
/*
* Each encoder has at most one connector (since we always steal
* it away), so we won't call mode_set hooks twice.
*/
if (funcs && funcs->atomic_mode_set) {
funcs->atomic_mode_set(encoder, new_crtc_state,
new_conn_state);
} else if (funcs && funcs->mode_set) {
funcs->mode_set(encoder, mode, adjusted_mode);
}
bridge = drm_bridge_chain_get_first_bridge(encoder);
drm_bridge_chain_mode_set(bridge, mode, adjusted_mode);
}
}
/**
* drm_atomic_helper_commit_modeset_disables - modeset commit to disable outputs
* @dev: DRM device
* @old_state: atomic state object with old state structures
*
* This function shuts down all the outputs that need to be shut down and
* prepares them (if required) with the new mode.
*
* For compatibility with legacy CRTC helpers this should be called before
* drm_atomic_helper_commit_planes(), which is what the default commit function
* does. But drivers with different needs can group the modeset commits together
* and do the plane commits at the end. This is useful for drivers doing runtime
* PM since planes updates then only happen when the CRTC is actually enabled.
*/
void drm_atomic_helper_commit_modeset_disables(struct drm_device *dev,
struct drm_atomic_state *old_state)
{
disable_outputs(dev, old_state);
drm_atomic_helper_update_legacy_modeset_state(dev, old_state);
drm_atomic_helper_calc_timestamping_constants(old_state);
crtc_set_mode(dev, old_state);
}
EXPORT_SYMBOL(drm_atomic_helper_commit_modeset_disables);
static void drm_atomic_helper_commit_writebacks(struct drm_device *dev,
struct drm_atomic_state *old_state)
{
struct drm_connector *connector;
struct drm_connector_state *new_conn_state;
int i;
for_each_new_connector_in_state(old_state, connector, new_conn_state, i) {
const struct drm_connector_helper_funcs *funcs;
funcs = connector->helper_private;
if (!funcs->atomic_commit)
continue;
if (new_conn_state->writeback_job && new_conn_state->writeback_job->fb) {
WARN_ON(connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK);
funcs->atomic_commit(connector, new_conn_state);
}
}
}
/**
* drm_atomic_helper_commit_modeset_enables - modeset commit to enable outputs
* @dev: DRM device
* @old_state: atomic state object with old state structures
*
* This function enables all the outputs with the new configuration which had to
* be turned off for the update.
*
* For compatibility with legacy CRTC helpers this should be called after
* drm_atomic_helper_commit_planes(), which is what the default commit function
* does. But drivers with different needs can group the modeset commits together
* and do the plane commits at the end. This is useful for drivers doing runtime
* PM since planes updates then only happen when the CRTC is actually enabled.
*/
void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,
struct drm_atomic_state *old_state)
{
struct drm_crtc *crtc;
struct drm_crtc_state *old_crtc_state;
struct drm_crtc_state *new_crtc_state;
struct drm_connector *connector;
struct drm_connector_state *new_conn_state;
int i;
for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) {
const struct drm_crtc_helper_funcs *funcs;
/* Need to filter out CRTCs where only planes change. */
if (!drm_atomic_crtc_needs_modeset(new_crtc_state))
continue;
if (!new_crtc_state->active)
continue;
funcs = crtc->helper_private;
if (new_crtc_state->enable) {
DRM_DEBUG_ATOMIC("enabling [CRTC:%d:%s]\n",
crtc->base.id, crtc->name);
if (funcs->atomic_enable)
funcs->atomic_enable(crtc, old_crtc_state);
else if (funcs->commit)
funcs->commit(crtc);
}
}
for_each_new_connector_in_state(old_state, connector, new_conn_state, i) {
const struct drm_encoder_helper_funcs *funcs;
struct drm_encoder *encoder;
struct drm_bridge *bridge;
if (!new_conn_state->best_encoder)
continue;
if (!new_conn_state->crtc->state->active ||
!drm_atomic_crtc_needs_modeset(new_conn_state->crtc->state))
continue;
encoder = new_conn_state->best_encoder;
funcs = encoder->helper_private;
DRM_DEBUG_ATOMIC("enabling [ENCODER:%d:%s]\n",
encoder->base.id, encoder->name);
/*
* Each encoder has at most one connector (since we always steal
* it away), so we won't call enable hooks twice.
*/
bridge = drm_bridge_chain_get_first_bridge(encoder);
drm_atomic_bridge_chain_pre_enable(bridge, old_state);
if (funcs) {
if (funcs->atomic_enable)
funcs->atomic_enable(encoder, old_state);
else if (funcs->enable)
funcs->enable(encoder);
else if (funcs->commit)
funcs->commit(encoder);
}
drm_atomic_bridge_chain_enable(bridge, old_state);
}
drm_atomic_helper_commit_writebacks(dev, old_state);
}
EXPORT_SYMBOL(drm_atomic_helper_commit_modeset_enables);
/**
* drm_atomic_helper_wait_for_fences - wait for fences stashed in plane state
* @dev: DRM device
* @state: atomic state object with old state structures
* @pre_swap: If true, do an interruptible wait, and @state is the new state.
* Otherwise @state is the old state.
*
* For implicit sync, driver should fish the exclusive fence out from the
* incoming fb's and stash it in the drm_plane_state. This is called after
* drm_atomic_helper_swap_state() so it uses the current plane state (and
* just uses the atomic state to find the changed planes)
*
* Note that @pre_swap is needed since the point where we block for fences moves
* around depending upon whether an atomic commit is blocking or
* non-blocking. For non-blocking commit all waiting needs to happen after
* drm_atomic_helper_swap_state() is called, but for blocking commits we want
* to wait **before** we do anything that can't be easily rolled back. That is
* before we call drm_atomic_helper_swap_state().
*
* Returns zero if success or < 0 if dma_fence_wait() fails.
*/
int drm_atomic_helper_wait_for_fences(struct drm_device *dev,
struct drm_atomic_state *state,
bool pre_swap)
{
struct drm_plane *plane;
struct drm_plane_state *new_plane_state;
int i, ret;
for_each_new_plane_in_state(state, plane, new_plane_state, i) {
if (!new_plane_state->fence)
continue;
WARN_ON(!new_plane_state->fb);
/*
* If waiting for fences pre-swap (ie: nonblock), userspace can
* still interrupt the operation. Instead of blocking until the
* timer expires, make the wait interruptible.
*/
ret = dma_fence_wait(new_plane_state->fence, pre_swap);
if (ret)
return ret;
dma_fence_put(new_plane_state->fence);
new_plane_state->fence = NULL;
}
return 0;
}
EXPORT_SYMBOL(drm_atomic_helper_wait_for_fences);
/**
* drm_atomic_helper_wait_for_vblanks - wait for vblank on CRTCs
* @dev: DRM device
* @old_state: atomic state object with old state structures
*
* Helper to, after atomic commit, wait for vblanks on all affected
* CRTCs (ie. before cleaning up old framebuffers using
* drm_atomic_helper_cleanup_planes()). It will only wait on CRTCs where the
* framebuffers have actually changed to optimize for the legacy cursor and
* plane update use-case.
*
* Drivers using the nonblocking commit tracking support initialized by calling
* drm_atomic_helper_setup_commit() should look at
* drm_atomic_helper_wait_for_flip_done() as an alternative.
*/
void
drm_atomic_helper_wait_for_vblanks(struct drm_device *dev,
struct drm_atomic_state *old_state)
{
struct drm_crtc *crtc;
struct drm_crtc_state *old_crtc_state, *new_crtc_state;
int i, ret;
unsigned crtc_mask = 0;
/*
* Legacy cursor ioctls are completely unsynced, and userspace
* relies on that (by doing tons of cursor updates).
*/
if (old_state->legacy_cursor_update)
return;
for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) {
if (!new_crtc_state->active)
continue;
ret = drm_crtc_vblank_get(crtc);
if (ret != 0)
continue;
crtc_mask |= drm_crtc_mask(crtc);
old_state->crtcs[i].last_vblank_count = drm_crtc_vblank_count(crtc);
}
for_each_old_crtc_in_state(old_state, crtc, old_crtc_state, i) {
if (!(crtc_mask & drm_crtc_mask(crtc)))
continue;
ret = wait_event_timeout(dev->vblank[i].queue,
old_state->crtcs[i].last_vblank_count !=
drm_crtc_vblank_count(crtc),
msecs_to_jiffies(100));
WARN(!ret, "[CRTC:%d:%s] vblank wait timed out\n",
crtc->base.id, crtc->name);
drm_crtc_vblank_put(crtc);
}
}
EXPORT_SYMBOL(drm_atomic_helper_wait_for_vblanks);
/**
* drm_atomic_helper_wait_for_flip_done - wait for all page flips to be done
* @dev: DRM device
* @old_state: atomic state object with old state structures
*
* Helper to, after atomic commit, wait for page flips on all affected
* crtcs (ie. before cleaning up old framebuffers using
* drm_atomic_helper_cleanup_planes()). Compared to
* drm_atomic_helper_wait_for_vblanks() this waits for the completion on all
* CRTCs, assuming that cursors-only updates are signalling their completion
* immediately (or using a different path).
*
* This requires that drivers use the nonblocking commit tracking support
* initialized using drm_atomic_helper_setup_commit().
*/
void drm_atomic_helper_wait_for_flip_done(struct drm_device *dev,
struct drm_atomic_state *old_state)
{
struct drm_crtc *crtc;
int i;
for (i = 0; i < dev->mode_config.num_crtc; i++) {
struct drm_crtc_commit *commit = old_state->crtcs[i].commit;
int ret;
crtc = old_state->crtcs[i].ptr;
if (!crtc || !commit)
continue;
ret = wait_for_completion_timeout(&commit->flip_done, 10 * HZ);
if (ret == 0)
DRM_ERROR("[CRTC:%d:%s] flip_done timed out\n",
crtc->base.id, crtc->name);
}
if (old_state->fake_commit)
complete_all(&old_state->fake_commit->flip_done);
}
EXPORT_SYMBOL(drm_atomic_helper_wait_for_flip_done);
/**
* drm_atomic_helper_commit_tail - commit atomic update to hardware
* @old_state: atomic state object with old state structures
*
* This is the default implementation for the
* &drm_mode_config_helper_funcs.atomic_commit_tail hook, for drivers
* that do not support runtime_pm or do not need the CRTC to be
* enabled to perform a commit. Otherwise, see
* drm_atomic_helper_commit_tail_rpm().
*
* Note that the default ordering of how the various stages are called is to
* match the legacy modeset helper library closest.
*/
void drm_atomic_helper_commit_tail(struct drm_atomic_state *old_state)
{
struct drm_device *dev = old_state->dev;
drm_atomic_helper_commit_modeset_disables(dev, old_state);
drm_atomic_helper_commit_planes(dev, old_state, 0);
drm_atomic_helper_commit_modeset_enables(dev, old_state);
drm_atomic_helper_fake_vblank(old_state);
drm_atomic_helper_commit_hw_done(old_state);
drm_atomic_helper_wait_for_vblanks(dev, old_state);
drm_atomic_helper_cleanup_planes(dev, old_state);
}
EXPORT_SYMBOL(drm_atomic_helper_commit_tail);
/**
* drm_atomic_helper_commit_tail_rpm - commit atomic update to hardware
* @old_state: new modeset state to be committed
*
* This is an alternative implementation for the
* &drm_mode_config_helper_funcs.atomic_commit_tail hook, for drivers
* that support runtime_pm or need the CRTC to be enabled to perform a
* commit. Otherwise, one should use the default implementation
* drm_atomic_helper_commit_tail().
*/
void drm_atomic_helper_commit_tail_rpm(struct drm_atomic_state *old_state)
{
struct drm_device *dev = old_state->dev;
drm_atomic_helper_commit_modeset_disables(dev, old_state);
drm_atomic_helper_commit_modeset_enables(dev, old_state);
drm_atomic_helper_commit_planes(dev, old_state,
DRM_PLANE_COMMIT_ACTIVE_ONLY);
drm_atomic_helper_fake_vblank(old_state);
drm_atomic_helper_commit_hw_done(old_state);
drm_atomic_helper_wait_for_vblanks(dev, old_state);
drm_atomic_helper_cleanup_planes(dev, old_state);
}
EXPORT_SYMBOL(drm_atomic_helper_commit_tail_rpm);
static void commit_tail(struct drm_atomic_state *old_state)
{
struct drm_device *dev = old_state->dev;
const struct drm_mode_config_helper_funcs *funcs;
struct drm_crtc_state *new_crtc_state;
struct drm_crtc *crtc;
ktime_t start;
s64 commit_time_ms;
unsigned int i, new_self_refresh_mask = 0;
funcs = dev->mode_config.helper_private;
/*
* We're measuring the _entire_ commit, so the time will vary depending
* on how many fences and objects are involved. For the purposes of self
* refresh, this is desirable since it'll give us an idea of how
* congested things are. This will inform our decision on how often we
* should enter self refresh after idle.
*
* These times will be averaged out in the self refresh helpers to avoid
* overreacting over one outlier frame
*/
start = ktime_get();
drm_atomic_helper_wait_for_fences(dev, old_state, false);
drm_atomic_helper_wait_for_dependencies(old_state);
/*
* We cannot safely access new_crtc_state after
* drm_atomic_helper_commit_hw_done() so figure out which crtc's have
* self-refresh active beforehand:
*/
for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i)
if (new_crtc_state->self_refresh_active)
new_self_refresh_mask |= BIT(i);
if (funcs && funcs->atomic_commit_tail)
funcs->atomic_commit_tail(old_state);
else
drm_atomic_helper_commit_tail(old_state);
commit_time_ms = ktime_ms_delta(ktime_get(), start);
if (commit_time_ms > 0)
drm_self_refresh_helper_update_avg_times(old_state,
(unsigned long)commit_time_ms,
new_self_refresh_mask);
drm_atomic_helper_commit_cleanup_done(old_state);
drm_atomic_state_put(old_state);
}
static void commit_work(struct work_struct *work)
{
struct drm_atomic_state *state = container_of(work,
struct drm_atomic_state,
commit_work);
commit_tail(state);
}
/**
* drm_atomic_helper_async_check - check if state can be commited asynchronously
* @dev: DRM device
* @state: the driver state object
*
* This helper will check if it is possible to commit the state asynchronously.
* Async commits are not supposed to swap the states like normal sync commits
* but just do in-place changes on the current state.
*
* It will return 0 if the commit can happen in an asynchronous fashion or error
* if not. Note that error just mean it can't be commited asynchronously, if it
* fails the commit should be treated like a normal synchronous commit.
*/
int drm_atomic_helper_async_check(struct drm_device *dev,
struct drm_atomic_state *state)
{
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
struct drm_plane *plane = NULL;
struct drm_plane_state *old_plane_state = NULL;
struct drm_plane_state *new_plane_state = NULL;
const struct drm_plane_helper_funcs *funcs;
int i, n_planes = 0;
for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
if (drm_atomic_crtc_needs_modeset(crtc_state))
return -EINVAL;
}
for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i)
n_planes++;
/* FIXME: we support only single plane updates for now */
if (n_planes != 1)
return -EINVAL;
if (!new_plane_state->crtc ||
old_plane_state->crtc != new_plane_state->crtc)
return -EINVAL;
funcs = plane->helper_private;
if (!funcs->atomic_async_update)
return -EINVAL;
if (new_plane_state->fence)
return -EINVAL;
/*
* Don't do an async update if there is an outstanding commit modifying
* the plane. This prevents our async update's changes from getting
* overridden by a previous synchronous update's state.
*/
if (old_plane_state->commit &&
!try_wait_for_completion(&old_plane_state->commit->hw_done))
return -EBUSY;
return funcs->atomic_async_check(plane, new_plane_state);
}
EXPORT_SYMBOL(drm_atomic_helper_async_check);
/**
* drm_atomic_helper_async_commit - commit state asynchronously
* @dev: DRM device
* @state: the driver state object
*
* This function commits a state asynchronously, i.e., not vblank
* synchronized. It should be used on a state only when
* drm_atomic_async_check() succeeds. Async commits are not supposed to swap
* the states like normal sync commits, but just do in-place changes on the
* current state.
*
* TODO: Implement full swap instead of doing in-place changes.
*/
void drm_atomic_helper_async_commit(struct drm_device *dev,
struct drm_atomic_state *state)
{
struct drm_plane *plane;
struct drm_plane_state *plane_state;
const struct drm_plane_helper_funcs *funcs;
int i;
for_each_new_plane_in_state(state, plane, plane_state, i) {
struct drm_framebuffer *new_fb = plane_state->fb;
struct drm_framebuffer *old_fb = plane->state->fb;
funcs = plane->helper_private;
funcs->atomic_async_update(plane, plane_state);
/*
* ->atomic_async_update() is supposed to update the
* plane->state in-place, make sure at least common
* properties have been properly updated.
*/
WARN_ON_ONCE(plane->state->fb != new_fb);
WARN_ON_ONCE(plane->state->crtc_x != plane_state->crtc_x);
WARN_ON_ONCE(plane->state->crtc_y != plane_state->crtc_y);
WARN_ON_ONCE(plane->state->src_x != plane_state->src_x);
WARN_ON_ONCE(plane->state->src_y != plane_state->src_y);
/*
* Make sure the FBs have been swapped so that cleanups in the
* new_state performs a cleanup in the old FB.
*/
WARN_ON_ONCE(plane_state->fb != old_fb);
}
}
EXPORT_SYMBOL(drm_atomic_helper_async_commit);
/**
* drm_atomic_helper_commit - commit validated state object
* @dev: DRM device
* @state: the driver state object
* @nonblock: whether nonblocking behavior is requested.
*
* This function commits a with drm_atomic_helper_check() pre-validated state
* object. This can still fail when e.g. the framebuffer reservation fails. This
* function implements nonblocking commits, using
* drm_atomic_helper_setup_commit() and related functions.
*
* Committing the actual hardware state is done through the
* &drm_mode_config_helper_funcs.atomic_commit_tail callback, or its default
* implementation drm_atomic_helper_commit_tail().
*
* RETURNS:
* Zero for success or -errno.
*/
int drm_atomic_helper_commit(struct drm_device *dev,
struct drm_atomic_state *state,
bool nonblock)
{
int ret;
if (state->async_update) {
ret = drm_atomic_helper_prepare_planes(dev, state);
if (ret)
return ret;
drm_atomic_helper_async_commit(dev, state);
drm_atomic_helper_cleanup_planes(dev, state);
return 0;
}
ret = drm_atomic_helper_setup_commit(state, nonblock);
if (ret)
return ret;
INIT_WORK(&state->commit_work, commit_work);
ret = drm_atomic_helper_prepare_planes(dev, state);
if (ret)
return ret;
if (!nonblock) {
ret = drm_atomic_helper_wait_for_fences(dev, state, true);
if (ret)
goto err;
}
/*
* This is the point of no return - everything below never fails except
* when the hw goes bonghits. Which means we can commit the new state on
* the software side now.
*/
ret = drm_atomic_helper_swap_state(state, true);
if (ret)
goto err;
/*
* Everything below can be run asynchronously without the need to grab
* any modeset locks at all under one condition: It must be guaranteed
* that the asynchronous work has either been cancelled (if the driver
* supports it, which at least requires that the framebuffers get
* cleaned up with drm_atomic_helper_cleanup_planes()) or completed
* before the new state gets committed on the software side with
* drm_atomic_helper_swap_state().
*
* This scheme allows new atomic state updates to be prepared and
* checked in parallel to the asynchronous completion of the previous
* update. Which is important since compositors need to figure out the
* composition of the next frame right after having submitted the
* current layout.
*
* NOTE: Commit work has multiple phases, first hardware commit, then
* cleanup. We want them to overlap, hence need system_unbound_wq to
* make sure work items don't artificially stall on each another.
*/
drm_atomic_state_get(state);
if (nonblock)
queue_work(system_unbound_wq, &state->commit_work);
else
commit_tail(state);
return 0;
err:
drm_atomic_helper_cleanup_planes(dev, state);
return ret;
}
EXPORT_SYMBOL(drm_atomic_helper_commit);
/**
* DOC: implementing nonblocking commit
*
* Nonblocking atomic commits should use struct &drm_crtc_commit to sequence
* different operations against each another. Locks, especially struct
* &drm_modeset_lock, should not be held in worker threads or any other
* asynchronous context used to commit the hardware state.
*
* drm_atomic_helper_commit() implements the recommended sequence for
* nonblocking commits, using drm_atomic_helper_setup_commit() internally:
*
* 1. Run drm_atomic_helper_prepare_planes(). Since this can fail and we
* need to propagate out of memory/VRAM errors to userspace, it must be called
* synchronously.
*
* 2. Synchronize with any outstanding nonblocking commit worker threads which
* might be affected by the new state update. This is handled by
* drm_atomic_helper_setup_commit().
*
* Asynchronous workers need to have sufficient parallelism to be able to run
* different atomic commits on different CRTCs in parallel. The simplest way to
* achieve this is by running them on the &system_unbound_wq work queue. Note
* that drivers are not required to split up atomic commits and run an
* individual commit in parallel - userspace is supposed to do that if it cares.
* But it might be beneficial to do that for modesets, since those necessarily
* must be done as one global operation, and enabling or disabling a CRTC can
* take a long time. But even that is not required.
*
* IMPORTANT: A &drm_atomic_state update for multiple CRTCs is sequenced
* against all CRTCs therein. Therefore for atomic state updates which only flip
* planes the driver must not get the struct &drm_crtc_state of unrelated CRTCs
* in its atomic check code: This would prevent committing of atomic updates to
* multiple CRTCs in parallel. In general, adding additional state structures
* should be avoided as much as possible, because this reduces parallelism in
* (nonblocking) commits, both due to locking and due to commit sequencing
* requirements.
*
* 3. The software state is updated synchronously with
* drm_atomic_helper_swap_state(). Doing this under the protection of all modeset
* locks means concurrent callers never see inconsistent state. Note that commit
* workers do not hold any locks; their access is only coordinated through
* ordering. If workers would access state only through the pointers in the
* free-standing state objects (currently not the case for any driver) then even
* multiple pending commits could be in-flight at the same time.
*
* 4. Schedule a work item to do all subsequent steps, using the split-out
* commit helpers: a) pre-plane commit b) plane commit c) post-plane commit and
* then cleaning up the framebuffers after the old framebuffer is no longer
* being displayed. The scheduled work should synchronize against other workers
* using the &drm_crtc_commit infrastructure as needed. See
* drm_atomic_helper_setup_commit() for more details.
*/
static int stall_checks(struct drm_crtc *crtc, bool nonblock)
{
struct drm_crtc_commit *commit, *stall_commit = NULL;
bool completed = true;
int i;
long ret = 0;
spin_lock(&crtc->commit_lock);
i = 0;
list_for_each_entry(commit, &crtc->commit_list, commit_entry) {
if (i == 0) {
completed = try_wait_for_completion(&commit->flip_done);
/* Userspace is not allowed to get ahead of the previous
* commit with nonblocking ones. */
if (!completed && nonblock) {
spin_unlock(&crtc->commit_lock);
return -EBUSY;
}
} else if (i == 1) {
stall_commit = drm_crtc_commit_get(commit);
break;
}
i++;
}
spin_unlock(&crtc->commit_lock);
if (!stall_commit)
return 0;
/* We don't want to let commits get ahead of cleanup work too much,
* stalling on 2nd previous commit means triple-buffer won't ever stall.
*/
ret = wait_for_completion_interruptible_timeout(&stall_commit->cleanup_done,
10*HZ);
if (ret == 0)
DRM_ERROR("[CRTC:%d:%s] cleanup_done timed out\n",
crtc->base.id, crtc->name);
drm_crtc_commit_put(stall_commit);
return ret < 0 ? ret : 0;
}
static void release_crtc_commit(struct completion *completion)
{
struct drm_crtc_commit *commit = container_of(completion,
typeof(*commit),
flip_done);
drm_crtc_commit_put(commit);
}
static void init_commit(struct drm_crtc_commit *commit, struct drm_crtc *crtc)
{
init_completion(&commit->flip_done);
init_completion(&commit->hw_done);
init_completion(&commit->cleanup_done);
INIT_LIST_HEAD(&commit->commit_entry);
kref_init(&commit->ref);
commit->crtc = crtc;
}
static struct drm_crtc_commit *
crtc_or_fake_commit(struct drm_atomic_state *state, struct drm_crtc *crtc)
{
if (crtc) {
struct drm_crtc_state *new_crtc_state;
new_crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
return new_crtc_state->commit;
}
if (!state->fake_commit) {
state->fake_commit = kzalloc(sizeof(*state->fake_commit), GFP_KERNEL);
if (!state->fake_commit)
return NULL;
init_commit(state->fake_commit, NULL);
}
return state->fake_commit;
}
/**
* drm_atomic_helper_setup_commit - setup possibly nonblocking commit
* @state: new modeset state to be committed
* @nonblock: whether nonblocking behavior is requested.
*
* This function prepares @state to be used by the atomic helper's support for
* nonblocking commits. Drivers using the nonblocking commit infrastructure
* should always call this function from their
* &drm_mode_config_funcs.atomic_commit hook.
*
* To be able to use this support drivers need to use a few more helper
* functions. drm_atomic_helper_wait_for_dependencies() must be called before
* actually committing the hardware state, and for nonblocking commits this call
* must be placed in the async worker. See also drm_atomic_helper_swap_state()
* and its stall parameter, for when a driver's commit hooks look at the
* &drm_crtc.state, &drm_plane.state or &drm_connector.state pointer directly.
*
* Completion of the hardware commit step must be signalled using
* drm_atomic_helper_commit_hw_done(). After this step the driver is not allowed
* to read or change any permanent software or hardware modeset state. The only
* exception is state protected by other means than &drm_modeset_lock locks.
* Only the free standing @state with pointers to the old state structures can
* be inspected, e.g. to clean up old buffers using
* drm_atomic_helper_cleanup_planes().
*
* At the very end, before cleaning up @state drivers must call
* drm_atomic_helper_commit_cleanup_done().
*
* This is all implemented by in drm_atomic_helper_commit(), giving drivers a
* complete and easy-to-use default implementation of the atomic_commit() hook.
*
* The tracking of asynchronously executed and still pending commits is done
* using the core structure &drm_crtc_commit.
*
* By default there's no need to clean up resources allocated by this function
* explicitly: drm_atomic_state_default_clear() will take care of that
* automatically.
*
* Returns:
*
* 0 on success. -EBUSY when userspace schedules nonblocking commits too fast,
* -ENOMEM on allocation failures and -EINTR when a signal is pending.
*/
int drm_atomic_helper_setup_commit(struct drm_atomic_state *state,
bool nonblock)
{
struct drm_crtc *crtc;
struct drm_crtc_state *old_crtc_state, *new_crtc_state;
struct drm_connector *conn;
struct drm_connector_state *old_conn_state, *new_conn_state;
struct drm_plane *plane;
struct drm_plane_state *old_plane_state, *new_plane_state;
struct drm_crtc_commit *commit;
int i, ret;
for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
commit = kzalloc(sizeof(*commit), GFP_KERNEL);
if (!commit)
return -ENOMEM;
init_commit(commit, crtc);
new_crtc_state->commit = commit;
ret = stall_checks(crtc, nonblock);
if (ret)
return ret;
/* Drivers only send out events when at least either current or
* new CRTC state is active. Complete right away if everything
* stays off. */
if (!old_crtc_state->active && !new_crtc_state->active) {
complete_all(&commit->flip_done);
continue;
}
/* Legacy cursor updates are fully unsynced. */
if (state->legacy_cursor_update) {
complete_all(&commit->flip_done);
continue;
}
if (!new_crtc_state->event) {
commit->event = kzalloc(sizeof(*commit->event),
GFP_KERNEL);
if (!commit->event)
return -ENOMEM;
new_crtc_state->event = commit->event;
}
new_crtc_state->event->base.completion = &commit->flip_done;
new_crtc_state->event->base.completion_release = release_crtc_commit;
drm_crtc_commit_get(commit);
commit->abort_completion = true;
state->crtcs[i].commit = commit;
drm_crtc_commit_get(commit);
}
for_each_oldnew_connector_in_state(state, conn, old_conn_state, new_conn_state, i) {
/* Userspace is not allowed to get ahead of the previous
* commit with nonblocking ones. */
if (nonblock && old_conn_state->commit &&
!try_wait_for_completion(&old_conn_state->commit->flip_done))
return -EBUSY;
/* Always track connectors explicitly for e.g. link retraining. */
commit = crtc_or_fake_commit(state, new_conn_state->crtc ?: old_conn_state->crtc);
if (!commit)
return -ENOMEM;
new_conn_state->commit = drm_crtc_commit_get(commit);
}
for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i) {
/* Userspace is not allowed to get ahead of the previous
* commit with nonblocking ones. */
if (nonblock && old_plane_state->commit &&
!try_wait_for_completion(&old_plane_state->commit->flip_done))
return -EBUSY;
/* Always track planes explicitly for async pageflip support. */
commit = crtc_or_fake_commit(state, new_plane_state->crtc ?: old_plane_state->crtc);
if (!commit)
return -ENOMEM;
new_plane_state->commit = drm_crtc_commit_get(commit);
}
return 0;
}
EXPORT_SYMBOL(drm_atomic_helper_setup_commit);
/**
* drm_atomic_helper_wait_for_dependencies - wait for required preceeding commits
* @old_state: atomic state object with old state structures
*
* This function waits for all preceeding commits that touch the same CRTC as
* @old_state to both be committed to the hardware (as signalled by
* drm_atomic_helper_commit_hw_done()) and executed by the hardware (as signalled
* by calling drm_crtc_send_vblank_event() on the &drm_crtc_state.event).
*
* This is part of the atomic helper support for nonblocking commits, see
* drm_atomic_helper_setup_commit() for an overview.
*/
void drm_atomic_helper_wait_for_dependencies(struct drm_atomic_state *old_state)
{
struct drm_crtc *crtc;
struct drm_crtc_state *old_crtc_state;
struct drm_plane *plane;
struct drm_plane_state *old_plane_state;
struct drm_connector *conn;
struct drm_connector_state *old_conn_state;
struct drm_crtc_commit *commit;
int i;
long ret;
for_each_old_crtc_in_state(old_state, crtc, old_crtc_state, i) {
commit = old_crtc_state->commit;
if (!commit)
continue;
ret = wait_for_completion_timeout(&commit->hw_done,
10*HZ);
if (ret == 0)
DRM_ERROR("[CRTC:%d:%s] hw_done timed out\n",
crtc->base.id, crtc->name);
/* Currently no support for overwriting flips, hence
* stall for previous one to execute completely. */
ret = wait_for_completion_timeout(&commit->flip_done,
10*HZ);
if (ret == 0)
DRM_ERROR("[CRTC:%d:%s] flip_done timed out\n",
crtc->base.id, crtc->name);
}
for_each_old_connector_in_state(old_state, conn, old_conn_state, i) {
commit = old_conn_state->commit;
if (!commit)
continue;
ret = wait_for_completion_timeout(&commit->hw_done,
10*HZ);
if (ret == 0)
DRM_ERROR("[CONNECTOR:%d:%s] hw_done timed out\n",
conn->base.id, conn->name);
/* Currently no support for overwriting flips, hence
* stall for previous one to execute completely. */
ret = wait_for_completion_timeout(&commit->flip_done,
10*HZ);
if (ret == 0)
DRM_ERROR("[CONNECTOR:%d:%s] flip_done timed out\n",
conn->base.id, conn->name);
}
for_each_old_plane_in_state(old_state, plane, old_plane_state, i) {
commit = old_plane_state->commit;
if (!commit)
continue;
ret = wait_for_completion_timeout(&commit->hw_done,
10*HZ);
if (ret == 0)
DRM_ERROR("[PLANE:%d:%s] hw_done timed out\n",
plane->base.id, plane->name);
/* Currently no support for overwriting flips, hence
* stall for previous one to execute completely. */
ret = wait_for_completion_timeout(&commit->flip_done,
10*HZ);
if (ret == 0)
DRM_ERROR("[PLANE:%d:%s] flip_done timed out\n",
plane->base.id, plane->name);
}
}
EXPORT_SYMBOL(drm_atomic_helper_wait_for_dependencies);
/**
* drm_atomic_helper_fake_vblank - fake VBLANK events if needed
* @old_state: atomic state object with old state structures
*
* This function walks all CRTCs and fakes VBLANK events on those with
* &drm_crtc_state.no_vblank set to true and &drm_crtc_state.event != NULL.
* The primary use of this function is writeback connectors working in oneshot
* mode and faking VBLANK events. In this case they only fake the VBLANK event
* when a job is queued, and any change to the pipeline that does not touch the
* connector is leading to timeouts when calling
* drm_atomic_helper_wait_for_vblanks() or
* drm_atomic_helper_wait_for_flip_done(). In addition to writeback
* connectors, this function can also fake VBLANK events for CRTCs without
* VBLANK interrupt.
*
* This is part of the atomic helper support for nonblocking commits, see
* drm_atomic_helper_setup_commit() for an overview.
*/
void drm_atomic_helper_fake_vblank(struct drm_atomic_state *old_state)
{
struct drm_crtc_state *new_crtc_state;
struct drm_crtc *crtc;
int i;
for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i) {
unsigned long flags;
if (!new_crtc_state->no_vblank)
continue;
spin_lock_irqsave(&old_state->dev->event_lock, flags);
if (new_crtc_state->event) {
drm_crtc_send_vblank_event(crtc,
new_crtc_state->event);
new_crtc_state->event = NULL;
}
spin_unlock_irqrestore(&old_state->dev->event_lock, flags);
}
}
EXPORT_SYMBOL(drm_atomic_helper_fake_vblank);
/**
* drm_atomic_helper_commit_hw_done - setup possible nonblocking commit
* @old_state: atomic state object with old state structures
*
* This function is used to signal completion of the hardware commit step. After
* this step the driver is not allowed to read or change any permanent software
* or hardware modeset state. The only exception is state protected by other
* means than &drm_modeset_lock locks.
*
* Drivers should try to postpone any expensive or delayed cleanup work after
* this function is called.
*
* This is part of the atomic helper support for nonblocking commits, see
* drm_atomic_helper_setup_commit() for an overview.
*/
void drm_atomic_helper_commit_hw_done(struct drm_atomic_state *old_state)
{
struct drm_crtc *crtc;
struct drm_crtc_state *old_crtc_state, *new_crtc_state;
struct drm_crtc_commit *commit;
int i;
for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) {
commit = new_crtc_state->commit;
if (!commit)
continue;
/*
* copy new_crtc_state->commit to old_crtc_state->commit,
* it's unsafe to touch new_crtc_state after hw_done,
* but we still need to do so in cleanup_done().
*/
if (old_crtc_state->commit)
drm_crtc_commit_put(old_crtc_state->commit);
old_crtc_state->commit = drm_crtc_commit_get(commit);
/* backend must have consumed any event by now */
WARN_ON(new_crtc_state->event);
complete_all(&commit->hw_done);
}
if (old_state->fake_commit) {
complete_all(&old_state->fake_commit->hw_done);
complete_all(&old_state->fake_commit->flip_done);
}
}
EXPORT_SYMBOL(drm_atomic_helper_commit_hw_done);
/**
* drm_atomic_helper_commit_cleanup_done - signal completion of commit
* @old_state: atomic state object with old state structures
*
* This signals completion of the atomic update @old_state, including any
* cleanup work. If used, it must be called right before calling
* drm_atomic_state_put().
*
* This is part of the atomic helper support for nonblocking commits, see
* drm_atomic_helper_setup_commit() for an overview.
*/
void drm_atomic_helper_commit_cleanup_done(struct drm_atomic_state *old_state)
{
struct drm_crtc *crtc;
struct drm_crtc_state *old_crtc_state;
struct drm_crtc_commit *commit;
int i;
for_each_old_crtc_in_state(old_state, crtc, old_crtc_state, i) {
commit = old_crtc_state->commit;
if (WARN_ON(!commit))
continue;
complete_all(&commit->cleanup_done);
WARN_ON(!try_wait_for_completion(&commit->hw_done));
spin_lock(&crtc->commit_lock);
list_del(&commit->commit_entry);
spin_unlock(&crtc->commit_lock);
}
if (old_state->fake_commit) {
complete_all(&old_state->fake_commit->cleanup_done);
WARN_ON(!try_wait_for_completion(&old_state->fake_commit->hw_done));
}
}
EXPORT_SYMBOL(drm_atomic_helper_commit_cleanup_done);
/**
* drm_atomic_helper_prepare_planes - prepare plane resources before commit
* @dev: DRM device
* @state: atomic state object with new state structures
*
* This function prepares plane state, specifically framebuffers, for the new
* configuration, by calling &drm_plane_helper_funcs.prepare_fb. If any failure
* is encountered this function will call &drm_plane_helper_funcs.cleanup_fb on
* any already successfully prepared framebuffer.
*
* Returns:
* 0 on success, negative error code on failure.
*/
int drm_atomic_helper_prepare_planes(struct drm_device *dev,
struct drm_atomic_state *state)
{
struct drm_connector *connector;
struct drm_connector_state *new_conn_state;
struct drm_plane *plane;
struct drm_plane_state *new_plane_state;
int ret, i, j;
for_each_new_connector_in_state(state, connector, new_conn_state, i) {
if (!new_conn_state->writeback_job)
continue;
ret = drm_writeback_prepare_job(new_conn_state->writeback_job);
if (ret < 0)
return ret;
}
for_each_new_plane_in_state(state, plane, new_plane_state, i) {
const struct drm_plane_helper_funcs *funcs;
funcs = plane->helper_private;
if (funcs->prepare_fb) {
ret = funcs->prepare_fb(plane, new_plane_state);
if (ret)
goto fail;
}
}
return 0;
fail:
for_each_new_plane_in_state(state, plane, new_plane_state, j) {
const struct drm_plane_helper_funcs *funcs;
if (j >= i)
continue;
funcs = plane->helper_private;
if (funcs->cleanup_fb)
funcs->cleanup_fb(plane, new_plane_state);
}
return ret;
}
EXPORT_SYMBOL(drm_atomic_helper_prepare_planes);
static bool plane_crtc_active(const struct drm_plane_state *state)
{
return state->crtc && state->crtc->state->active;
}
/**
* drm_atomic_helper_commit_planes - commit plane state
* @dev: DRM device
* @old_state: atomic state object with old state structures
* @flags: flags for committing plane state
*
* This function commits the new plane state using the plane and atomic helper
* functions for planes and CRTCs. It assumes that the atomic state has already
* been pushed into the relevant object state pointers, since this step can no
* longer fail.
*
* It still requires the global state object @old_state to know which planes and
* crtcs need to be updated though.
*
* Note that this function does all plane updates across all CRTCs in one step.
* If the hardware can't support this approach look at
* drm_atomic_helper_commit_planes_on_crtc() instead.
*
* Plane parameters can be updated by applications while the associated CRTC is
* disabled. The DRM/KMS core will store the parameters in the plane state,
* which will be available to the driver when the CRTC is turned on. As a result
* most drivers don't need to be immediately notified of plane updates for a
* disabled CRTC.
*
* Unless otherwise needed, drivers are advised to set the ACTIVE_ONLY flag in
* @flags in order not to receive plane update notifications related to a
* disabled CRTC. This avoids the need to manually ignore plane updates in
* driver code when the driver and/or hardware can't or just don't need to deal
* with updates on disabled CRTCs, for example when supporting runtime PM.
*
* Drivers may set the NO_DISABLE_AFTER_MODESET flag in @flags if the relevant
* display controllers require to disable a CRTC's planes when the CRTC is
* disabled. This function would skip the &drm_plane_helper_funcs.atomic_disable
* call for a plane if the CRTC of the old plane state needs a modesetting
* operation. Of course, the drivers need to disable the planes in their CRTC
* disable callbacks since no one else would do that.
*
* The drm_atomic_helper_commit() default implementation doesn't set the
* ACTIVE_ONLY flag to most closely match the behaviour of the legacy helpers.
* This should not be copied blindly by drivers.
*/
void drm_atomic_helper_commit_planes(struct drm_device *dev,
struct drm_atomic_state *old_state,
uint32_t flags)
{
struct drm_crtc *crtc;
struct drm_crtc_state *old_crtc_state, *new_crtc_state;
struct drm_plane *plane;
struct drm_plane_state *old_plane_state, *new_plane_state;
int i;
bool active_only = flags & DRM_PLANE_COMMIT_ACTIVE_ONLY;
bool no_disable = flags & DRM_PLANE_COMMIT_NO_DISABLE_AFTER_MODESET;
for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) {
const struct drm_crtc_helper_funcs *funcs;
funcs = crtc->helper_private;
if (!funcs || !funcs->atomic_begin)
continue;
if (active_only && !new_crtc_state->active)
continue;
funcs->atomic_begin(crtc, old_crtc_state);
}
for_each_oldnew_plane_in_state(old_state, plane, old_plane_state, new_plane_state, i) {
const struct drm_plane_helper_funcs *funcs;
bool disabling;
funcs = plane->helper_private;
if (!funcs)
continue;
disabling = drm_atomic_plane_disabling(old_plane_state,
new_plane_state);
if (active_only) {
/*
* Skip planes related to inactive CRTCs. If the plane
* is enabled use the state of the current CRTC. If the
* plane is being disabled use the state of the old
* CRTC to avoid skipping planes being disabled on an
* active CRTC.
*/
if (!disabling && !plane_crtc_active(new_plane_state))
continue;
if (disabling && !plane_crtc_active(old_plane_state))
continue;
}
/*
* Special-case disabling the plane if drivers support it.
*/
if (disabling && funcs->atomic_disable) {
struct drm_crtc_state *crtc_state;
crtc_state = old_plane_state->crtc->state;
if (drm_atomic_crtc_needs_modeset(crtc_state) &&
no_disable)
continue;
funcs->atomic_disable(plane, old_plane_state);
} else if (new_plane_state->crtc || disabling) {
funcs->atomic_update(plane, old_plane_state);
}
}
for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) {
const struct drm_crtc_helper_funcs *funcs;
funcs = crtc->helper_private;
if (!funcs || !funcs->atomic_flush)
continue;
if (active_only && !new_crtc_state->active)
continue;
funcs->atomic_flush(crtc, old_crtc_state);
}
}
EXPORT_SYMBOL(drm_atomic_helper_commit_planes);
/**
* drm_atomic_helper_commit_planes_on_crtc - commit plane state for a CRTC
* @old_crtc_state: atomic state object with the old CRTC state
*
* This function commits the new plane state using the plane and atomic helper
* functions for planes on the specific CRTC. It assumes that the atomic state
* has already been pushed into the relevant object state pointers, since this
* step can no longer fail.
*
* This function is useful when plane updates should be done CRTC-by-CRTC
* instead of one global step like drm_atomic_helper_commit_planes() does.
*
* This function can only be savely used when planes are not allowed to move
* between different CRTCs because this function doesn't handle inter-CRTC
* depencies. Callers need to ensure that either no such depencies exist,
* resolve them through ordering of commit calls or through some other means.
*/
void
drm_atomic_helper_commit_planes_on_crtc(struct drm_crtc_state *old_crtc_state)
{
const struct drm_crtc_helper_funcs *crtc_funcs;
struct drm_crtc *crtc = old_crtc_state->crtc;
struct drm_atomic_state *old_state = old_crtc_state->state;
struct drm_crtc_state *new_crtc_state =
drm_atomic_get_new_crtc_state(old_state, crtc);
struct drm_plane *plane;
unsigned plane_mask;
plane_mask = old_crtc_state->plane_mask;
plane_mask |= new_crtc_state->plane_mask;
crtc_funcs = crtc->helper_private;
if (crtc_funcs && crtc_funcs->atomic_begin)
crtc_funcs->atomic_begin(crtc, old_crtc_state);
drm_for_each_plane_mask(plane, crtc->dev, plane_mask) {
struct drm_plane_state *old_plane_state =
drm_atomic_get_old_plane_state(old_state, plane);
struct drm_plane_state *new_plane_state =
drm_atomic_get_new_plane_state(old_state, plane);
const struct drm_plane_helper_funcs *plane_funcs;
plane_funcs = plane->helper_private;
if (!old_plane_state || !plane_funcs)
continue;
WARN_ON(new_plane_state->crtc &&
new_plane_state->crtc != crtc);
if (drm_atomic_plane_disabling(old_plane_state, new_plane_state) &&
plane_funcs->atomic_disable)
plane_funcs->atomic_disable(plane, old_plane_state);
else if (new_plane_state->crtc ||
drm_atomic_plane_disabling(old_plane_state, new_plane_state))
plane_funcs->atomic_update(plane, old_plane_state);
}
if (crtc_funcs && crtc_funcs->atomic_flush)
crtc_funcs->atomic_flush(crtc, old_crtc_state);
}
EXPORT_SYMBOL(drm_atomic_helper_commit_planes_on_crtc);
/**
* drm_atomic_helper_disable_planes_on_crtc - helper to disable CRTC's planes
* @old_crtc_state: atomic state object with the old CRTC state
* @atomic: if set, synchronize with CRTC's atomic_begin/flush hooks
*
* Disables all planes associated with the given CRTC. This can be
* used for instance in the CRTC helper atomic_disable callback to disable
* all planes.
*
* If the atomic-parameter is set the function calls the CRTC's
* atomic_begin hook before and atomic_flush hook after disabling the
* planes.
*
* It is a bug to call this function without having implemented the
* &drm_plane_helper_funcs.atomic_disable plane hook.
*/
void
drm_atomic_helper_disable_planes_on_crtc(struct drm_crtc_state *old_crtc_state,
bool atomic)
{
struct drm_crtc *crtc = old_crtc_state->crtc;
const struct drm_crtc_helper_funcs *crtc_funcs =
crtc->helper_private;
struct drm_plane *plane;
if (atomic && crtc_funcs && crtc_funcs->atomic_begin)
crtc_funcs->atomic_begin(crtc, NULL);
drm_atomic_crtc_state_for_each_plane(plane, old_crtc_state) {
const struct drm_plane_helper_funcs *plane_funcs =
plane->helper_private;
if (!plane_funcs)
continue;
WARN_ON(!plane_funcs->atomic_disable);
if (plane_funcs->atomic_disable)
plane_funcs->atomic_disable(plane, NULL);
}
if (atomic && crtc_funcs && crtc_funcs->atomic_flush)
crtc_funcs->atomic_flush(crtc, NULL);
}
EXPORT_SYMBOL(drm_atomic_helper_disable_planes_on_crtc);
/**
* drm_atomic_helper_cleanup_planes - cleanup plane resources after commit
* @dev: DRM device
* @old_state: atomic state object with old state structures
*
* This function cleans up plane state, specifically framebuffers, from the old
* configuration. Hence the old configuration must be perserved in @old_state to
* be able to call this function.
*
* This function must also be called on the new state when the atomic update
* fails at any point after calling drm_atomic_helper_prepare_planes().
*/
void drm_atomic_helper_cleanup_planes(struct drm_device *dev,
struct drm_atomic_state *old_state)
{
struct drm_plane *plane;
struct drm_plane_state *old_plane_state, *new_plane_state;
int i;
for_each_oldnew_plane_in_state(old_state, plane, old_plane_state, new_plane_state, i) {
const struct drm_plane_helper_funcs *funcs;
struct drm_plane_state *plane_state;
/*
* This might be called before swapping when commit is aborted,
* in which case we have to cleanup the new state.
*/
if (old_plane_state == plane->state)
plane_state = new_plane_state;
else
plane_state = old_plane_state;
funcs = plane->helper_private;
if (funcs->cleanup_fb)
funcs->cleanup_fb(plane, plane_state);
}
}
EXPORT_SYMBOL(drm_atomic_helper_cleanup_planes);
/**
* drm_atomic_helper_swap_state - store atomic state into current sw state
* @state: atomic state
* @stall: stall for preceeding commits
*
* This function stores the atomic state into the current state pointers in all
* driver objects. It should be called after all failing steps have been done
* and succeeded, but before the actual hardware state is committed.
*
* For cleanup and error recovery the current state for all changed objects will
* be swapped into @state.
*
* With that sequence it fits perfectly into the plane prepare/cleanup sequence:
*
* 1. Call drm_atomic_helper_prepare_planes() with the staged atomic state.
*
* 2. Do any other steps that might fail.
*
* 3. Put the staged state into the current state pointers with this function.
*
* 4. Actually commit the hardware state.
*
* 5. Call drm_atomic_helper_cleanup_planes() with @state, which since step 3
* contains the old state. Also do any other cleanup required with that state.
*
* @stall must be set when nonblocking commits for this driver directly access
* the &drm_plane.state, &drm_crtc.state or &drm_connector.state pointer. With
* the current atomic helpers this is almost always the case, since the helpers
* don't pass the right state structures to the callbacks.
*
* Returns:
*
* Returns 0 on success. Can return -ERESTARTSYS when @stall is true and the
* waiting for the previous commits has been interrupted.
*/
int drm_atomic_helper_swap_state(struct drm_atomic_state *state,
bool stall)
{
int i, ret;
struct drm_connector *connector;
struct drm_connector_state *old_conn_state, *new_conn_state;
struct drm_crtc *crtc;
struct drm_crtc_state *old_crtc_state, *new_crtc_state;
struct drm_plane *plane;
struct drm_plane_state *old_plane_state, *new_plane_state;
struct drm_crtc_commit *commit;
struct drm_private_obj *obj;
struct drm_private_state *old_obj_state, *new_obj_state;
if (stall) {
/*
* We have to stall for hw_done here before
* drm_atomic_helper_wait_for_dependencies() because flip
* depth > 1 is not yet supported by all drivers. As long as
* obj->state is directly dereferenced anywhere in the drivers
* atomic_commit_tail function, then it's unsafe to swap state
* before drm_atomic_helper_commit_hw_done() is called.
*/
for_each_old_crtc_in_state(state, crtc, old_crtc_state, i) {
commit = old_crtc_state->commit;
if (!commit)
continue;
ret = wait_for_completion_interruptible(&commit->hw_done);
if (ret)
return ret;
}
for_each_old_connector_in_state(state, connector, old_conn_state, i) {
commit = old_conn_state->commit;
if (!commit)
continue;
ret = wait_for_completion_interruptible(&commit->hw_done);
if (ret)
return ret;
}
for_each_old_plane_in_state(state, plane, old_plane_state, i) {
commit = old_plane_state->commit;
if (!commit)
continue;
ret = wait_for_completion_interruptible(&commit->hw_done);
if (ret)
return ret;
}
}
for_each_oldnew_connector_in_state(state, connector, old_conn_state, new_conn_state, i) {
WARN_ON(connector->state != old_conn_state);
old_conn_state->state = state;
new_conn_state->state = NULL;
state->connectors[i].state = old_conn_state;
connector->state = new_conn_state;
}
for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
WARN_ON(crtc->state != old_crtc_state);
old_crtc_state->state = state;
new_crtc_state->state = NULL;
state->crtcs[i].state = old_crtc_state;
crtc->state = new_crtc_state;
if (new_crtc_state->commit) {
spin_lock(&crtc->commit_lock);
list_add(&new_crtc_state->commit->commit_entry,
&crtc->commit_list);
spin_unlock(&crtc->commit_lock);
new_crtc_state->commit->event = NULL;
}
}
for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i) {
WARN_ON(plane->state != old_plane_state);
old_plane_state->state = state;
new_plane_state->state = NULL;
state->planes[i].state = old_plane_state;
plane->state = new_plane_state;
}
for_each_oldnew_private_obj_in_state(state, obj, old_obj_state, new_obj_state, i) {
WARN_ON(obj->state != old_obj_state);
old_obj_state->state = state;
new_obj_state->state = NULL;
state->private_objs[i].state = old_obj_state;
obj->state = new_obj_state;
}
return 0;
}
EXPORT_SYMBOL(drm_atomic_helper_swap_state);
/**
* drm_atomic_helper_update_plane - Helper for primary plane update using atomic
* @plane: plane object to update
* @crtc: owning CRTC of owning plane
* @fb: framebuffer to flip onto plane
* @crtc_x: x offset of primary plane on @crtc
* @crtc_y: y offset of primary plane on @crtc
* @crtc_w: width of primary plane rectangle on @crtc
* @crtc_h: height of primary plane rectangle on @crtc
* @src_x: x offset of @fb for panning
* @src_y: y offset of @fb for panning
* @src_w: width of source rectangle in @fb
* @src_h: height of source rectangle in @fb
* @ctx: lock acquire context
*
* Provides a default plane update handler using the atomic driver interface.
*
* RETURNS:
* Zero on success, error code on failure
*/
int drm_atomic_helper_update_plane(struct drm_plane *plane,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h,
struct drm_modeset_acquire_ctx *ctx)
{
struct drm_atomic_state *state;
struct drm_plane_state *plane_state;
int ret = 0;
state = drm_atomic_state_alloc(plane->dev);
if (!state)
return -ENOMEM;
state->acquire_ctx = ctx;
plane_state = drm_atomic_get_plane_state(state, plane);
if (IS_ERR(plane_state)) {
ret = PTR_ERR(plane_state);
goto fail;
}
ret = drm_atomic_set_crtc_for_plane(plane_state, crtc);
if (ret != 0)
goto fail;
drm_atomic_set_fb_for_plane(plane_state, fb);
plane_state->crtc_x = crtc_x;
plane_state->crtc_y = crtc_y;
plane_state->crtc_w = crtc_w;
plane_state->crtc_h = crtc_h;
plane_state->src_x = src_x;
plane_state->src_y = src_y;
plane_state->src_w = src_w;
plane_state->src_h = src_h;
if (plane == crtc->cursor)
state->legacy_cursor_update = true;
ret = drm_atomic_commit(state);
fail:
drm_atomic_state_put(state);
return ret;
}
EXPORT_SYMBOL(drm_atomic_helper_update_plane);
/**
* drm_atomic_helper_disable_plane - Helper for primary plane disable using * atomic
* @plane: plane to disable
* @ctx: lock acquire context
*
* Provides a default plane disable handler using the atomic driver interface.
*
* RETURNS:
* Zero on success, error code on failure
*/
int drm_atomic_helper_disable_plane(struct drm_plane *plane,
struct drm_modeset_acquire_ctx *ctx)
{
struct drm_atomic_state *state;
struct drm_plane_state *plane_state;
int ret = 0;
state = drm_atomic_state_alloc(plane->dev);
if (!state)
return -ENOMEM;
state->acquire_ctx = ctx;
plane_state = drm_atomic_get_plane_state(state, plane);
if (IS_ERR(plane_state)) {
ret = PTR_ERR(plane_state);
goto fail;
}
if (plane_state->crtc && plane_state->crtc->cursor == plane)
plane_state->state->legacy_cursor_update = true;
ret = __drm_atomic_helper_disable_plane(plane, plane_state);
if (ret != 0)
goto fail;
ret = drm_atomic_commit(state);
fail:
drm_atomic_state_put(state);
return ret;
}
EXPORT_SYMBOL(drm_atomic_helper_disable_plane);
/**
* drm_atomic_helper_set_config - set a new config from userspace
* @set: mode set configuration
* @ctx: lock acquisition context
*
* Provides a default CRTC set_config handler using the atomic driver interface.
*
* NOTE: For backwards compatibility with old userspace this automatically
* resets the "link-status" property to GOOD, to force any link
* re-training. The SETCRTC ioctl does not define whether an update does
* need a full modeset or just a plane update, hence we're allowed to do
* that. See also drm_connector_set_link_status_property().
*
* Returns:
* Returns 0 on success, negative errno numbers on failure.
*/
int drm_atomic_helper_set_config(struct drm_mode_set *set,
struct drm_modeset_acquire_ctx *ctx)
{
struct drm_atomic_state *state;
struct drm_crtc *crtc = set->crtc;
int ret = 0;
state = drm_atomic_state_alloc(crtc->dev);
if (!state)
return -ENOMEM;
state->acquire_ctx = ctx;
ret = __drm_atomic_helper_set_config(set, state);
if (ret != 0)
goto fail;
ret = handle_conflicting_encoders(state, true);
if (ret)
return ret;
ret = drm_atomic_commit(state);
fail:
drm_atomic_state_put(state);
return ret;
}
EXPORT_SYMBOL(drm_atomic_helper_set_config);
/**
* drm_atomic_helper_disable_all - disable all currently active outputs
* @dev: DRM device
* @ctx: lock acquisition context
*
* Loops through all connectors, finding those that aren't turned off and then
* turns them off by setting their DPMS mode to OFF and deactivating the CRTC
* that they are connected to.
*
* This is used for example in suspend/resume to disable all currently active
* functions when suspending. If you just want to shut down everything at e.g.
* driver unload, look at drm_atomic_helper_shutdown().
*
* Note that if callers haven't already acquired all modeset locks this might
* return -EDEADLK, which must be handled by calling drm_modeset_backoff().
*
* Returns:
* 0 on success or a negative error code on failure.
*
* See also:
* drm_atomic_helper_suspend(), drm_atomic_helper_resume() and
* drm_atomic_helper_shutdown().
*/
int drm_atomic_helper_disable_all(struct drm_device *dev,
struct drm_modeset_acquire_ctx *ctx)
{
struct drm_atomic_state *state;
struct drm_connector_state *conn_state;
struct drm_connector *conn;
struct drm_plane_state *plane_state;
struct drm_plane *plane;
struct drm_crtc_state *crtc_state;
struct drm_crtc *crtc;
int ret, i;
state = drm_atomic_state_alloc(dev);
if (!state)
return -ENOMEM;
state->acquire_ctx = ctx;
drm_for_each_crtc(crtc, dev) {
crtc_state = drm_atomic_get_crtc_state(state, crtc);
if (IS_ERR(crtc_state)) {
ret = PTR_ERR(crtc_state);
goto free;
}
crtc_state->active = false;
ret = drm_atomic_set_mode_prop_for_crtc(crtc_state, NULL);
if (ret < 0)
goto free;
ret = drm_atomic_add_affected_planes(state, crtc);
if (ret < 0)
goto free;
ret = drm_atomic_add_affected_connectors(state, crtc);
if (ret < 0)
goto free;
}
for_each_new_connector_in_state(state, conn, conn_state, i) {
ret = drm_atomic_set_crtc_for_connector(conn_state, NULL);
if (ret < 0)
goto free;
}
for_each_new_plane_in_state(state, plane, plane_state, i) {
ret = drm_atomic_set_crtc_for_plane(plane_state, NULL);
if (ret < 0)
goto free;
drm_atomic_set_fb_for_plane(plane_state, NULL);
}
ret = drm_atomic_commit(state);
free:
drm_atomic_state_put(state);
return ret;
}
EXPORT_SYMBOL(drm_atomic_helper_disable_all);
/**
* drm_atomic_helper_shutdown - shutdown all CRTC
* @dev: DRM device
*
* This shuts down all CRTC, which is useful for driver unloading. Shutdown on
* suspend should instead be handled with drm_atomic_helper_suspend(), since
* that also takes a snapshot of the modeset state to be restored on resume.
*
* This is just a convenience wrapper around drm_atomic_helper_disable_all(),
* and it is the atomic version of drm_crtc_force_disable_all().
*/
void drm_atomic_helper_shutdown(struct drm_device *dev)
{
struct drm_modeset_acquire_ctx ctx;
int ret;
DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx, 0, ret);
ret = drm_atomic_helper_disable_all(dev, &ctx);
if (ret)
DRM_ERROR("Disabling all crtc's during unload failed with %i\n", ret);
DRM_MODESET_LOCK_ALL_END(dev, ctx, ret);
}
EXPORT_SYMBOL(drm_atomic_helper_shutdown);
/**
* drm_atomic_helper_duplicate_state - duplicate an atomic state object
* @dev: DRM device
* @ctx: lock acquisition context
*
* Makes a copy of the current atomic state by looping over all objects and
* duplicating their respective states. This is used for example by suspend/
* resume support code to save the state prior to suspend such that it can
* be restored upon resume.
*
* Note that this treats atomic state as persistent between save and restore.
* Drivers must make sure that this is possible and won't result in confusion
* or erroneous behaviour.
*
* Note that if callers haven't already acquired all modeset locks this might
* return -EDEADLK, which must be handled by calling drm_modeset_backoff().
*
* Returns:
* A pointer to the copy of the atomic state object on success or an
* ERR_PTR()-encoded error code on failure.
*
* See also:
* drm_atomic_helper_suspend(), drm_atomic_helper_resume()
*/
struct drm_atomic_state *
drm_atomic_helper_duplicate_state(struct drm_device *dev,
struct drm_modeset_acquire_ctx *ctx)
{
struct drm_atomic_state *state;
struct drm_connector *conn;
struct drm_connector_list_iter conn_iter;
struct drm_plane *plane;
struct drm_crtc *crtc;
int err = 0;
state = drm_atomic_state_alloc(dev);
if (!state)
return ERR_PTR(-ENOMEM);
state->acquire_ctx = ctx;
state->duplicated = true;
drm_for_each_crtc(crtc, dev) {
struct drm_crtc_state *crtc_state;
crtc_state = drm_atomic_get_crtc_state(state, crtc);
if (IS_ERR(crtc_state)) {
err = PTR_ERR(crtc_state);
goto free;
}
}
drm_for_each_plane(plane, dev) {
struct drm_plane_state *plane_state;
plane_state = drm_atomic_get_plane_state(state, plane);
if (IS_ERR(plane_state)) {
err = PTR_ERR(plane_state);
goto free;
}
}
drm_connector_list_iter_begin(dev, &conn_iter);
drm_for_each_connector_iter(conn, &conn_iter) {
struct drm_connector_state *conn_state;
conn_state = drm_atomic_get_connector_state(state, conn);
if (IS_ERR(conn_state)) {
err = PTR_ERR(conn_state);
drm_connector_list_iter_end(&conn_iter);
goto free;
}
}
drm_connector_list_iter_end(&conn_iter);
/* clear the acquire context so that it isn't accidentally reused */
state->acquire_ctx = NULL;
free:
if (err < 0) {
drm_atomic_state_put(state);
state = ERR_PTR(err);
}
return state;
}
EXPORT_SYMBOL(drm_atomic_helper_duplicate_state);
/**
* drm_atomic_helper_suspend - subsystem-level suspend helper
* @dev: DRM device
*
* Duplicates the current atomic state, disables all active outputs and then
* returns a pointer to the original atomic state to the caller. Drivers can
* pass this pointer to the drm_atomic_helper_resume() helper upon resume to
* restore the output configuration that was active at the time the system
* entered suspend.
*
* Note that it is potentially unsafe to use this. The atomic state object
* returned by this function is assumed to be persistent. Drivers must ensure
* that this holds true. Before calling this function, drivers must make sure
* to suspend fbdev emulation so that nothing can be using the device.
*
* Returns:
* A pointer to a copy of the state before suspend on success or an ERR_PTR()-
* encoded error code on failure. Drivers should store the returned atomic
* state object and pass it to the drm_atomic_helper_resume() helper upon
* resume.
*
* See also:
* drm_atomic_helper_duplicate_state(), drm_atomic_helper_disable_all(),
* drm_atomic_helper_resume(), drm_atomic_helper_commit_duplicated_state()
*/
struct drm_atomic_state *drm_atomic_helper_suspend(struct drm_device *dev)
{
struct drm_modeset_acquire_ctx ctx;
struct drm_atomic_state *state;
int err;
/* This can never be returned, but it makes the compiler happy */
state = ERR_PTR(-EINVAL);
DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx, 0, err);
state = drm_atomic_helper_duplicate_state(dev, &ctx);
if (IS_ERR(state))
goto unlock;
err = drm_atomic_helper_disable_all(dev, &ctx);
if (err < 0) {
drm_atomic_state_put(state);
state = ERR_PTR(err);
goto unlock;
}
unlock:
DRM_MODESET_LOCK_ALL_END(dev, ctx, err);
if (err)
return ERR_PTR(err);
return state;
}
EXPORT_SYMBOL(drm_atomic_helper_suspend);
/**
* drm_atomic_helper_commit_duplicated_state - commit duplicated state
* @state: duplicated atomic state to commit
* @ctx: pointer to acquire_ctx to use for commit.
*
* The state returned by drm_atomic_helper_duplicate_state() and
* drm_atomic_helper_suspend() is partially invalid, and needs to
* be fixed up before commit.
*
* Returns:
* 0 on success or a negative error code on failure.
*
* See also:
* drm_atomic_helper_suspend()
*/
int drm_atomic_helper_commit_duplicated_state(struct drm_atomic_state *state,
struct drm_modeset_acquire_ctx *ctx)
{
int i, ret;
struct drm_plane *plane;
struct drm_plane_state *new_plane_state;
struct drm_connector *connector;
struct drm_connector_state *new_conn_state;
struct drm_crtc *crtc;
struct drm_crtc_state *new_crtc_state;
state->acquire_ctx = ctx;
for_each_new_plane_in_state(state, plane, new_plane_state, i)
state->planes[i].old_state = plane->state;
for_each_new_crtc_in_state(state, crtc, new_crtc_state, i)
state->crtcs[i].old_state = crtc->state;
for_each_new_connector_in_state(state, connector, new_conn_state, i)
state->connectors[i].old_state = connector->state;
ret = drm_atomic_commit(state);
state->acquire_ctx = NULL;
return ret;
}
EXPORT_SYMBOL(drm_atomic_helper_commit_duplicated_state);
/**
* drm_atomic_helper_resume - subsystem-level resume helper
* @dev: DRM device
* @state: atomic state to resume to
*
* Calls drm_mode_config_reset() to synchronize hardware and software states,
* grabs all modeset locks and commits the atomic state object. This can be
* used in conjunction with the drm_atomic_helper_suspend() helper to
* implement suspend/resume for drivers that support atomic mode-setting.
*
* Returns:
* 0 on success or a negative error code on failure.
*
* See also:
* drm_atomic_helper_suspend()
*/
int drm_atomic_helper_resume(struct drm_device *dev,
struct drm_atomic_state *state)
{
struct drm_modeset_acquire_ctx ctx;
int err;
drm_mode_config_reset(dev);
DRM_MODESET_LOCK_ALL_BEGIN(dev, ctx, 0, err);
err = drm_atomic_helper_commit_duplicated_state(state, &ctx);
DRM_MODESET_LOCK_ALL_END(dev, ctx, err);
drm_atomic_state_put(state);
return err;
}
EXPORT_SYMBOL(drm_atomic_helper_resume);
static int page_flip_common(struct drm_atomic_state *state,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_pending_vblank_event *event,
uint32_t flags)
{
struct drm_plane *plane = crtc->primary;
struct drm_plane_state *plane_state;
struct drm_crtc_state *crtc_state;
int ret = 0;
crtc_state = drm_atomic_get_crtc_state(state, crtc);
if (IS_ERR(crtc_state))
return PTR_ERR(crtc_state);
crtc_state->event = event;
crtc_state->async_flip = flags & DRM_MODE_PAGE_FLIP_ASYNC;
plane_state = drm_atomic_get_plane_state(state, plane);
if (IS_ERR(plane_state))
return PTR_ERR(plane_state);
ret = drm_atomic_set_crtc_for_plane(plane_state, crtc);
if (ret != 0)
return ret;
drm_atomic_set_fb_for_plane(plane_state, fb);
/* Make sure we don't accidentally do a full modeset. */
state->allow_modeset = false;
if (!crtc_state->active) {
DRM_DEBUG_ATOMIC("[CRTC:%d:%s] disabled, rejecting legacy flip\n",
crtc->base.id, crtc->name);
return -EINVAL;
}
return ret;
}
/**
* drm_atomic_helper_page_flip - execute a legacy page flip
* @crtc: DRM CRTC
* @fb: DRM framebuffer
* @event: optional DRM event to signal upon completion
* @flags: flip flags for non-vblank sync'ed updates
* @ctx: lock acquisition context
*
* Provides a default &drm_crtc_funcs.page_flip implementation
* using the atomic driver interface.
*
* Returns:
* Returns 0 on success, negative errno numbers on failure.
*
* See also:
* drm_atomic_helper_page_flip_target()
*/
int drm_atomic_helper_page_flip(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_pending_vblank_event *event,
uint32_t flags,
struct drm_modeset_acquire_ctx *ctx)
{
struct drm_plane *plane = crtc->primary;
struct drm_atomic_state *state;
int ret = 0;
state = drm_atomic_state_alloc(plane->dev);
if (!state)
return -ENOMEM;
state->acquire_ctx = ctx;
ret = page_flip_common(state, crtc, fb, event, flags);
if (ret != 0)
goto fail;
ret = drm_atomic_nonblocking_commit(state);
fail:
drm_atomic_state_put(state);
return ret;
}
EXPORT_SYMBOL(drm_atomic_helper_page_flip);
/**
* drm_atomic_helper_page_flip_target - do page flip on target vblank period.
* @crtc: DRM CRTC
* @fb: DRM framebuffer
* @event: optional DRM event to signal upon completion
* @flags: flip flags for non-vblank sync'ed updates
* @target: specifying the target vblank period when the flip to take effect
* @ctx: lock acquisition context
*
* Provides a default &drm_crtc_funcs.page_flip_target implementation.
* Similar to drm_atomic_helper_page_flip() with extra parameter to specify
* target vblank period to flip.
*
* Returns:
* Returns 0 on success, negative errno numbers on failure.
*/
int drm_atomic_helper_page_flip_target(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_pending_vblank_event *event,
uint32_t flags,
uint32_t target,
struct drm_modeset_acquire_ctx *ctx)
{
struct drm_plane *plane = crtc->primary;
struct drm_atomic_state *state;
struct drm_crtc_state *crtc_state;
int ret = 0;
state = drm_atomic_state_alloc(plane->dev);
if (!state)
return -ENOMEM;
state->acquire_ctx = ctx;
ret = page_flip_common(state, crtc, fb, event, flags);
if (ret != 0)
goto fail;
crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
if (WARN_ON(!crtc_state)) {
ret = -EINVAL;
goto fail;
}
crtc_state->target_vblank = target;
ret = drm_atomic_nonblocking_commit(state);
fail:
drm_atomic_state_put(state);
return ret;
}
EXPORT_SYMBOL(drm_atomic_helper_page_flip_target);
/**
* drm_atomic_helper_legacy_gamma_set - set the legacy gamma correction table
* @crtc: CRTC object
* @red: red correction table
* @green: green correction table
* @blue: green correction table
* @size: size of the tables
* @ctx: lock acquire context
*
* Implements support for legacy gamma correction table for drivers
* that support color management through the DEGAMMA_LUT/GAMMA_LUT
* properties. See drm_crtc_enable_color_mgmt() and the containing chapter for
* how the atomic color management and gamma tables work.
*/
int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
u16 *red, u16 *green, u16 *blue,
uint32_t size,
struct drm_modeset_acquire_ctx *ctx)
{
struct drm_device *dev = crtc->dev;
struct drm_atomic_state *state;
struct drm_crtc_state *crtc_state;
struct drm_property_blob *blob = NULL;
struct drm_color_lut *blob_data;
int i, ret = 0;
bool replaced;
state = drm_atomic_state_alloc(crtc->dev);
if (!state)
return -ENOMEM;
blob = drm_property_create_blob(dev,
sizeof(struct drm_color_lut) * size,
NULL);
if (IS_ERR(blob)) {
ret = PTR_ERR(blob);
blob = NULL;
goto fail;
}
/* Prepare GAMMA_LUT with the legacy values. */
blob_data = blob->data;
for (i = 0; i < size; i++) {
blob_data[i].red = red[i];
blob_data[i].green = green[i];
blob_data[i].blue = blue[i];
}
state->acquire_ctx = ctx;
crtc_state = drm_atomic_get_crtc_state(state, crtc);
if (IS_ERR(crtc_state)) {
ret = PTR_ERR(crtc_state);
goto fail;
}
/* Reset DEGAMMA_LUT and CTM properties. */
replaced = drm_property_replace_blob(&crtc_state->degamma_lut, NULL);
replaced |= drm_property_replace_blob(&crtc_state->ctm, NULL);
replaced |= drm_property_replace_blob(&crtc_state->gamma_lut, blob);
crtc_state->color_mgmt_changed |= replaced;
ret = drm_atomic_commit(state);
fail:
drm_atomic_state_put(state);
drm_property_blob_put(blob);
return ret;
}
EXPORT_SYMBOL(drm_atomic_helper_legacy_gamma_set);
/**
* drm_atomic_helper_bridge_propagate_bus_fmt() - Propagate output format to
* the input end of a bridge
* @bridge: bridge control structure
* @bridge_state: new bridge state
* @crtc_state: new CRTC state
* @conn_state: new connector state
* @output_fmt: tested output bus format
* @num_input_fmts: will contain the size of the returned array
*
* This helper is a pluggable implementation of the
* &drm_bridge_funcs.atomic_get_input_bus_fmts operation for bridges that don't
* modify the bus configuration between their input and their output. It
* returns an array of input formats with a single element set to @output_fmt.
*
* RETURNS:
* a valid format array of size @num_input_fmts, or NULL if the allocation
* failed
*/
u32 *
drm_atomic_helper_bridge_propagate_bus_fmt(struct drm_bridge *bridge,
struct drm_bridge_state *bridge_state,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state,
u32 output_fmt,
unsigned int *num_input_fmts)
{
u32 *input_fmts;
input_fmts = kzalloc(sizeof(*input_fmts), GFP_KERNEL);
if (!input_fmts) {
*num_input_fmts = 0;
return NULL;
}
*num_input_fmts = 1;
input_fmts[0] = output_fmt;
return input_fmts;
}
EXPORT_SYMBOL(drm_atomic_helper_bridge_propagate_bus_fmt);