| // SPDX-License-Identifier: GPL-2.0+ |
| |
| #define pr_fmt(fmt) "kprobes: " fmt |
| |
| #include <linux/kprobes.h> |
| #include <linux/extable.h> |
| #include <linux/slab.h> |
| #include <linux/stop_machine.h> |
| #include <asm/ptrace.h> |
| #include <linux/uaccess.h> |
| #include <asm/sections.h> |
| #include <asm/cacheflush.h> |
| #include <asm/bug.h> |
| #include <asm/patch.h> |
| |
| #include "decode-insn.h" |
| |
| DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; |
| DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); |
| |
| static void __kprobes |
| post_kprobe_handler(struct kprobe *, struct kprobe_ctlblk *, struct pt_regs *); |
| |
| static void __kprobes arch_prepare_ss_slot(struct kprobe *p) |
| { |
| unsigned long offset = GET_INSN_LENGTH(p->opcode); |
| |
| p->ainsn.api.restore = (unsigned long)p->addr + offset; |
| |
| patch_text(p->ainsn.api.insn, p->opcode); |
| patch_text((void *)((unsigned long)(p->ainsn.api.insn) + offset), |
| __BUG_INSN_32); |
| } |
| |
| static void __kprobes arch_prepare_simulate(struct kprobe *p) |
| { |
| p->ainsn.api.restore = 0; |
| } |
| |
| static void __kprobes arch_simulate_insn(struct kprobe *p, struct pt_regs *regs) |
| { |
| struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); |
| |
| if (p->ainsn.api.handler) |
| p->ainsn.api.handler((u32)p->opcode, |
| (unsigned long)p->addr, regs); |
| |
| post_kprobe_handler(p, kcb, regs); |
| } |
| |
| int __kprobes arch_prepare_kprobe(struct kprobe *p) |
| { |
| unsigned long probe_addr = (unsigned long)p->addr; |
| |
| if (probe_addr & 0x1) |
| return -EILSEQ; |
| |
| /* copy instruction */ |
| p->opcode = *p->addr; |
| |
| /* decode instruction */ |
| switch (riscv_probe_decode_insn(p->addr, &p->ainsn.api)) { |
| case INSN_REJECTED: /* insn not supported */ |
| return -EINVAL; |
| |
| case INSN_GOOD_NO_SLOT: /* insn need simulation */ |
| p->ainsn.api.insn = NULL; |
| break; |
| |
| case INSN_GOOD: /* instruction uses slot */ |
| p->ainsn.api.insn = get_insn_slot(); |
| if (!p->ainsn.api.insn) |
| return -ENOMEM; |
| break; |
| } |
| |
| /* prepare the instruction */ |
| if (p->ainsn.api.insn) |
| arch_prepare_ss_slot(p); |
| else |
| arch_prepare_simulate(p); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_MMU |
| void *alloc_insn_page(void) |
| { |
| return __vmalloc_node_range(PAGE_SIZE, 1, VMALLOC_START, VMALLOC_END, |
| GFP_KERNEL, PAGE_KERNEL_READ_EXEC, |
| VM_FLUSH_RESET_PERMS, NUMA_NO_NODE, |
| __builtin_return_address(0)); |
| } |
| #endif |
| |
| /* install breakpoint in text */ |
| void __kprobes arch_arm_kprobe(struct kprobe *p) |
| { |
| if ((p->opcode & __INSN_LENGTH_MASK) == __INSN_LENGTH_32) |
| patch_text(p->addr, __BUG_INSN_32); |
| else |
| patch_text(p->addr, __BUG_INSN_16); |
| } |
| |
| /* remove breakpoint from text */ |
| void __kprobes arch_disarm_kprobe(struct kprobe *p) |
| { |
| patch_text(p->addr, p->opcode); |
| } |
| |
| void __kprobes arch_remove_kprobe(struct kprobe *p) |
| { |
| } |
| |
| static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) |
| { |
| kcb->prev_kprobe.kp = kprobe_running(); |
| kcb->prev_kprobe.status = kcb->kprobe_status; |
| } |
| |
| static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb) |
| { |
| __this_cpu_write(current_kprobe, kcb->prev_kprobe.kp); |
| kcb->kprobe_status = kcb->prev_kprobe.status; |
| } |
| |
| static void __kprobes set_current_kprobe(struct kprobe *p) |
| { |
| __this_cpu_write(current_kprobe, p); |
| } |
| |
| /* |
| * Interrupts need to be disabled before single-step mode is set, and not |
| * reenabled until after single-step mode ends. |
| * Without disabling interrupt on local CPU, there is a chance of |
| * interrupt occurrence in the period of exception return and start of |
| * out-of-line single-step, that result in wrongly single stepping |
| * into the interrupt handler. |
| */ |
| static void __kprobes kprobes_save_local_irqflag(struct kprobe_ctlblk *kcb, |
| struct pt_regs *regs) |
| { |
| kcb->saved_status = regs->status; |
| regs->status &= ~SR_SPIE; |
| } |
| |
| static void __kprobes kprobes_restore_local_irqflag(struct kprobe_ctlblk *kcb, |
| struct pt_regs *regs) |
| { |
| regs->status = kcb->saved_status; |
| } |
| |
| static void __kprobes setup_singlestep(struct kprobe *p, |
| struct pt_regs *regs, |
| struct kprobe_ctlblk *kcb, int reenter) |
| { |
| unsigned long slot; |
| |
| if (reenter) { |
| save_previous_kprobe(kcb); |
| set_current_kprobe(p); |
| kcb->kprobe_status = KPROBE_REENTER; |
| } else { |
| kcb->kprobe_status = KPROBE_HIT_SS; |
| } |
| |
| if (p->ainsn.api.insn) { |
| /* prepare for single stepping */ |
| slot = (unsigned long)p->ainsn.api.insn; |
| |
| /* IRQs and single stepping do not mix well. */ |
| kprobes_save_local_irqflag(kcb, regs); |
| |
| instruction_pointer_set(regs, slot); |
| } else { |
| /* insn simulation */ |
| arch_simulate_insn(p, regs); |
| } |
| } |
| |
| static int __kprobes reenter_kprobe(struct kprobe *p, |
| struct pt_regs *regs, |
| struct kprobe_ctlblk *kcb) |
| { |
| switch (kcb->kprobe_status) { |
| case KPROBE_HIT_SSDONE: |
| case KPROBE_HIT_ACTIVE: |
| kprobes_inc_nmissed_count(p); |
| setup_singlestep(p, regs, kcb, 1); |
| break; |
| case KPROBE_HIT_SS: |
| case KPROBE_REENTER: |
| pr_warn("Failed to recover from reentered kprobes.\n"); |
| dump_kprobe(p); |
| BUG(); |
| break; |
| default: |
| WARN_ON(1); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static void __kprobes |
| post_kprobe_handler(struct kprobe *cur, struct kprobe_ctlblk *kcb, struct pt_regs *regs) |
| { |
| /* return addr restore if non-branching insn */ |
| if (cur->ainsn.api.restore != 0) |
| regs->epc = cur->ainsn.api.restore; |
| |
| /* restore back original saved kprobe variables and continue */ |
| if (kcb->kprobe_status == KPROBE_REENTER) { |
| restore_previous_kprobe(kcb); |
| return; |
| } |
| |
| /* call post handler */ |
| kcb->kprobe_status = KPROBE_HIT_SSDONE; |
| if (cur->post_handler) { |
| /* post_handler can hit breakpoint and single step |
| * again, so we enable D-flag for recursive exception. |
| */ |
| cur->post_handler(cur, regs, 0); |
| } |
| |
| reset_current_kprobe(); |
| } |
| |
| int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int trapnr) |
| { |
| struct kprobe *cur = kprobe_running(); |
| struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); |
| |
| switch (kcb->kprobe_status) { |
| case KPROBE_HIT_SS: |
| case KPROBE_REENTER: |
| /* |
| * We are here because the instruction being single |
| * stepped caused a page fault. We reset the current |
| * kprobe and the ip points back to the probe address |
| * and allow the page fault handler to continue as a |
| * normal page fault. |
| */ |
| regs->epc = (unsigned long) cur->addr; |
| BUG_ON(!instruction_pointer(regs)); |
| |
| if (kcb->kprobe_status == KPROBE_REENTER) |
| restore_previous_kprobe(kcb); |
| else { |
| kprobes_restore_local_irqflag(kcb, regs); |
| reset_current_kprobe(); |
| } |
| |
| break; |
| case KPROBE_HIT_ACTIVE: |
| case KPROBE_HIT_SSDONE: |
| /* |
| * In case the user-specified fault handler returned |
| * zero, try to fix up. |
| */ |
| if (fixup_exception(regs)) |
| return 1; |
| } |
| return 0; |
| } |
| |
| bool __kprobes |
| kprobe_breakpoint_handler(struct pt_regs *regs) |
| { |
| struct kprobe *p, *cur_kprobe; |
| struct kprobe_ctlblk *kcb; |
| unsigned long addr = instruction_pointer(regs); |
| |
| kcb = get_kprobe_ctlblk(); |
| cur_kprobe = kprobe_running(); |
| |
| p = get_kprobe((kprobe_opcode_t *) addr); |
| |
| if (p) { |
| if (cur_kprobe) { |
| if (reenter_kprobe(p, regs, kcb)) |
| return true; |
| } else { |
| /* Probe hit */ |
| set_current_kprobe(p); |
| kcb->kprobe_status = KPROBE_HIT_ACTIVE; |
| |
| /* |
| * If we have no pre-handler or it returned 0, we |
| * continue with normal processing. If we have a |
| * pre-handler and it returned non-zero, it will |
| * modify the execution path and no need to single |
| * stepping. Let's just reset current kprobe and exit. |
| * |
| * pre_handler can hit a breakpoint and can step thru |
| * before return. |
| */ |
| if (!p->pre_handler || !p->pre_handler(p, regs)) |
| setup_singlestep(p, regs, kcb, 0); |
| else |
| reset_current_kprobe(); |
| } |
| return true; |
| } |
| |
| /* |
| * The breakpoint instruction was removed right |
| * after we hit it. Another cpu has removed |
| * either a probepoint or a debugger breakpoint |
| * at this address. In either case, no further |
| * handling of this interrupt is appropriate. |
| * Return back to original instruction, and continue. |
| */ |
| return false; |
| } |
| |
| bool __kprobes |
| kprobe_single_step_handler(struct pt_regs *regs) |
| { |
| struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); |
| unsigned long addr = instruction_pointer(regs); |
| struct kprobe *cur = kprobe_running(); |
| |
| if (cur && (kcb->kprobe_status & (KPROBE_HIT_SS | KPROBE_REENTER)) && |
| ((unsigned long)&cur->ainsn.api.insn[0] + GET_INSN_LENGTH(cur->opcode) == addr)) { |
| kprobes_restore_local_irqflag(kcb, regs); |
| post_kprobe_handler(cur, kcb, regs); |
| return true; |
| } |
| /* not ours, kprobes should ignore it */ |
| return false; |
| } |
| |
| /* |
| * Provide a blacklist of symbols identifying ranges which cannot be kprobed. |
| * This blacklist is exposed to userspace via debugfs (kprobes/blacklist). |
| */ |
| int __init arch_populate_kprobe_blacklist(void) |
| { |
| int ret; |
| |
| ret = kprobe_add_area_blacklist((unsigned long)__irqentry_text_start, |
| (unsigned long)__irqentry_text_end); |
| return ret; |
| } |
| |
| void __kprobes __used *trampoline_probe_handler(struct pt_regs *regs) |
| { |
| return (void *)kretprobe_trampoline_handler(regs, NULL); |
| } |
| |
| void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, |
| struct pt_regs *regs) |
| { |
| ri->ret_addr = (kprobe_opcode_t *)regs->ra; |
| ri->fp = NULL; |
| regs->ra = (unsigned long) &__kretprobe_trampoline; |
| } |
| |
| int __kprobes arch_trampoline_kprobe(struct kprobe *p) |
| { |
| return 0; |
| } |
| |
| int __init arch_init_kprobes(void) |
| { |
| return 0; |
| } |