| /* |
| * linux/drivers/message/fusion/mptspi.c |
| * For use with LSI PCI chip/adapter(s) |
| * running LSI Fusion MPT (Message Passing Technology) firmware. |
| * |
| * Copyright (c) 1999-2008 LSI Corporation |
| * (mailto:DL-MPTFusionLinux@lsi.com) |
| * |
| */ |
| /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| /* |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; version 2 of the License. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| NO WARRANTY |
| THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR |
| CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT |
| LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, |
| MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is |
| solely responsible for determining the appropriateness of using and |
| distributing the Program and assumes all risks associated with its |
| exercise of rights under this Agreement, including but not limited to |
| the risks and costs of program errors, damage to or loss of data, |
| programs or equipment, and unavailability or interruption of operations. |
| |
| DISCLAIMER OF LIABILITY |
| NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY |
| DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND |
| ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED |
| HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/kdev_t.h> |
| #include <linux/blkdev.h> |
| #include <linux/delay.h> /* for mdelay */ |
| #include <linux/interrupt.h> |
| #include <linux/reboot.h> /* notifier code */ |
| #include <linux/workqueue.h> |
| #include <linux/raid_class.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_tcq.h> |
| #include <scsi/scsi_transport.h> |
| #include <scsi/scsi_transport_spi.h> |
| #include <scsi/scsi_dbg.h> |
| |
| #include "mptbase.h" |
| #include "mptscsih.h" |
| |
| /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| #define my_NAME "Fusion MPT SPI Host driver" |
| #define my_VERSION MPT_LINUX_VERSION_COMMON |
| #define MYNAM "mptspi" |
| |
| MODULE_AUTHOR(MODULEAUTHOR); |
| MODULE_DESCRIPTION(my_NAME); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(my_VERSION); |
| |
| /* Command line args */ |
| static int mpt_saf_te = MPTSCSIH_SAF_TE; |
| module_param(mpt_saf_te, int, 0); |
| MODULE_PARM_DESC(mpt_saf_te, " Force enabling SEP Processor: enable=1 (default=MPTSCSIH_SAF_TE=0)"); |
| |
| static void mptspi_write_offset(struct scsi_target *, int); |
| static void mptspi_write_width(struct scsi_target *, int); |
| static int mptspi_write_spi_device_pg1(struct scsi_target *, |
| struct _CONFIG_PAGE_SCSI_DEVICE_1 *); |
| |
| static struct scsi_transport_template *mptspi_transport_template = NULL; |
| |
| static u8 mptspiDoneCtx = MPT_MAX_PROTOCOL_DRIVERS; |
| static u8 mptspiTaskCtx = MPT_MAX_PROTOCOL_DRIVERS; |
| static u8 mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for internal commands */ |
| |
| /** |
| * mptspi_setTargetNegoParms - Update the target negotiation parameters |
| * @hd: Pointer to a SCSI Host Structure |
| * @target: per target private data |
| * @sdev: SCSI device |
| * |
| * Update the target negotiation parameters based on the the Inquiry |
| * data, adapter capabilities, and NVRAM settings. |
| **/ |
| static void |
| mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target, |
| struct scsi_device *sdev) |
| { |
| MPT_ADAPTER *ioc = hd->ioc; |
| SpiCfgData *pspi_data = &ioc->spi_data; |
| int id = (int) target->id; |
| int nvram; |
| u8 width = MPT_NARROW; |
| u8 factor = MPT_ASYNC; |
| u8 offset = 0; |
| u8 nfactor; |
| u8 noQas = 1; |
| |
| target->negoFlags = pspi_data->noQas; |
| |
| if (sdev->scsi_level < SCSI_2) { |
| width = 0; |
| factor = MPT_ULTRA2; |
| offset = pspi_data->maxSyncOffset; |
| target->tflags &= ~MPT_TARGET_FLAGS_Q_YES; |
| } else { |
| if (scsi_device_wide(sdev)) |
| width = 1; |
| |
| if (scsi_device_sync(sdev)) { |
| factor = pspi_data->minSyncFactor; |
| if (!scsi_device_dt(sdev)) |
| factor = MPT_ULTRA2; |
| else { |
| if (!scsi_device_ius(sdev) && |
| !scsi_device_qas(sdev)) |
| factor = MPT_ULTRA160; |
| else { |
| factor = MPT_ULTRA320; |
| if (scsi_device_qas(sdev)) { |
| ddvprintk(ioc, |
| printk(MYIOC_s_DEBUG_FMT "Enabling QAS due to " |
| "byte56=%02x on id=%d!\n", ioc->name, |
| scsi_device_qas(sdev), id)); |
| noQas = 0; |
| } |
| if (sdev->type == TYPE_TAPE && |
| scsi_device_ius(sdev)) |
| target->negoFlags |= MPT_TAPE_NEGO_IDP; |
| } |
| } |
| offset = pspi_data->maxSyncOffset; |
| |
| /* If RAID, never disable QAS |
| * else if non RAID, do not disable |
| * QAS if bit 1 is set |
| * bit 1 QAS support, non-raid only |
| * bit 0 IU support |
| */ |
| if (target->raidVolume == 1) |
| noQas = 0; |
| } else { |
| factor = MPT_ASYNC; |
| offset = 0; |
| } |
| } |
| |
| if (!sdev->tagged_supported) |
| target->tflags &= ~MPT_TARGET_FLAGS_Q_YES; |
| |
| /* Update tflags based on NVRAM settings. (SCSI only) |
| */ |
| if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) { |
| nvram = pspi_data->nvram[id]; |
| nfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8; |
| |
| if (width) |
| width = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1; |
| |
| if (offset > 0) { |
| /* Ensure factor is set to the |
| * maximum of: adapter, nvram, inquiry |
| */ |
| if (nfactor) { |
| if (nfactor < pspi_data->minSyncFactor ) |
| nfactor = pspi_data->minSyncFactor; |
| |
| factor = max(factor, nfactor); |
| if (factor == MPT_ASYNC) |
| offset = 0; |
| } else { |
| offset = 0; |
| factor = MPT_ASYNC; |
| } |
| } else { |
| factor = MPT_ASYNC; |
| } |
| } |
| |
| /* Make sure data is consistent |
| */ |
| if ((!width) && (factor < MPT_ULTRA2)) |
| factor = MPT_ULTRA2; |
| |
| /* Save the data to the target structure. |
| */ |
| target->minSyncFactor = factor; |
| target->maxOffset = offset; |
| target->maxWidth = width; |
| |
| spi_min_period(scsi_target(sdev)) = factor; |
| spi_max_offset(scsi_target(sdev)) = offset; |
| spi_max_width(scsi_target(sdev)) = width; |
| |
| target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO; |
| |
| /* Disable unused features. |
| */ |
| if (!width) |
| target->negoFlags |= MPT_TARGET_NO_NEGO_WIDE; |
| |
| if (!offset) |
| target->negoFlags |= MPT_TARGET_NO_NEGO_SYNC; |
| |
| if ( factor > MPT_ULTRA320 ) |
| noQas = 0; |
| |
| if (noQas && (pspi_data->noQas == 0)) { |
| pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS; |
| target->negoFlags |= MPT_TARGET_NO_NEGO_QAS; |
| |
| /* Disable QAS in a mixed configuration case |
| */ |
| |
| ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| "Disabling QAS due to noQas=%02x on id=%d!\n", ioc->name, noQas, id)); |
| } |
| } |
| |
| /** |
| * mptspi_writeIOCPage4 - write IOC Page 4 |
| * @hd: Pointer to a SCSI Host Structure |
| * @channel: channel number |
| * @id: write IOC Page4 for this ID & Bus |
| * |
| * Return: -EAGAIN if unable to obtain a Message Frame |
| * or 0 if success. |
| * |
| * Remark: We do not wait for a return, write pages sequentially. |
| **/ |
| static int |
| mptspi_writeIOCPage4(MPT_SCSI_HOST *hd, u8 channel , u8 id) |
| { |
| MPT_ADAPTER *ioc = hd->ioc; |
| Config_t *pReq; |
| IOCPage4_t *IOCPage4Ptr; |
| MPT_FRAME_HDR *mf; |
| dma_addr_t dataDma; |
| u32 flagsLength; |
| int ii; |
| |
| /* Get a MF for this command. |
| */ |
| if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) { |
| dfailprintk(ioc, printk(MYIOC_s_WARN_FMT |
| "writeIOCPage4 : no msg frames!\n",ioc->name)); |
| return -EAGAIN; |
| } |
| |
| /* Set the request and the data pointers. |
| * Place data at end of MF. |
| */ |
| pReq = (Config_t *)mf; |
| |
| /* Complete the request frame (same for all requests). |
| */ |
| pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; |
| pReq->Reserved = 0; |
| pReq->ChainOffset = 0; |
| pReq->Function = MPI_FUNCTION_CONFIG; |
| pReq->ExtPageLength = 0; |
| pReq->ExtPageType = 0; |
| pReq->MsgFlags = 0; |
| for (ii=0; ii < 8; ii++) { |
| pReq->Reserved2[ii] = 0; |
| } |
| |
| IOCPage4Ptr = ioc->spi_data.pIocPg4; |
| dataDma = ioc->spi_data.IocPg4_dma; |
| ii = IOCPage4Ptr->ActiveSEP++; |
| IOCPage4Ptr->SEP[ii].SEPTargetID = id; |
| IOCPage4Ptr->SEP[ii].SEPBus = channel; |
| pReq->Header = IOCPage4Ptr->Header; |
| pReq->PageAddress = cpu_to_le32(id | (channel << 8 )); |
| |
| /* Add a SGE to the config request. |
| */ |
| flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE | |
| (IOCPage4Ptr->Header.PageLength + ii) * 4; |
| |
| ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma); |
| |
| ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| "writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n", |
| ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, id, channel)); |
| |
| mpt_put_msg_frame(ioc->DoneCtx, ioc, mf); |
| |
| return 0; |
| } |
| |
| /** |
| * mptspi_initTarget - Target, LUN alloc/free functionality. |
| * @hd: Pointer to MPT_SCSI_HOST structure |
| * @vtarget: per target private data |
| * @sdev: SCSI device |
| * |
| * NOTE: It's only SAFE to call this routine if data points to |
| * sane & valid STANDARD INQUIRY data! |
| * |
| * Allocate and initialize memory for this target. |
| * Save inquiry data. |
| * |
| **/ |
| static void |
| mptspi_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget, |
| struct scsi_device *sdev) |
| { |
| |
| /* Is LUN supported? If so, upper 2 bits will be 0 |
| * in first byte of inquiry data. |
| */ |
| if (sdev->inq_periph_qual != 0) |
| return; |
| |
| if (vtarget == NULL) |
| return; |
| |
| vtarget->type = sdev->type; |
| |
| if ((sdev->type == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) { |
| /* Treat all Processors as SAF-TE if |
| * command line option is set */ |
| vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; |
| mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id); |
| }else if ((sdev->type == TYPE_PROCESSOR) && |
| !(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) { |
| if (sdev->inquiry_len > 49 ) { |
| if (sdev->inquiry[44] == 'S' && |
| sdev->inquiry[45] == 'A' && |
| sdev->inquiry[46] == 'F' && |
| sdev->inquiry[47] == '-' && |
| sdev->inquiry[48] == 'T' && |
| sdev->inquiry[49] == 'E' ) { |
| vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED; |
| mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id); |
| } |
| } |
| } |
| mptspi_setTargetNegoParms(hd, vtarget, sdev); |
| } |
| |
| /** |
| * mptspi_is_raid - Determines whether target is belonging to volume |
| * @hd: Pointer to a SCSI HOST structure |
| * @id: target device id |
| * |
| * Return: |
| * non-zero = true |
| * zero = false |
| * |
| */ |
| static int |
| mptspi_is_raid(struct _MPT_SCSI_HOST *hd, u32 id) |
| { |
| int i, rc = 0; |
| MPT_ADAPTER *ioc = hd->ioc; |
| |
| if (!ioc->raid_data.pIocPg2) |
| goto out; |
| |
| if (!ioc->raid_data.pIocPg2->NumActiveVolumes) |
| goto out; |
| for (i=0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) { |
| if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id) { |
| rc = 1; |
| goto out; |
| } |
| } |
| |
| out: |
| return rc; |
| } |
| |
| static int mptspi_target_alloc(struct scsi_target *starget) |
| { |
| struct Scsi_Host *shost = dev_to_shost(&starget->dev); |
| struct _MPT_SCSI_HOST *hd = shost_priv(shost); |
| VirtTarget *vtarget; |
| MPT_ADAPTER *ioc; |
| |
| if (hd == NULL) |
| return -ENODEV; |
| |
| ioc = hd->ioc; |
| vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL); |
| if (!vtarget) |
| return -ENOMEM; |
| |
| vtarget->ioc_id = ioc->id; |
| vtarget->tflags = MPT_TARGET_FLAGS_Q_YES; |
| vtarget->id = (u8)starget->id; |
| vtarget->channel = (u8)starget->channel; |
| vtarget->starget = starget; |
| starget->hostdata = vtarget; |
| |
| if (starget->channel == 1) { |
| if (mptscsih_is_phys_disk(ioc, 0, starget->id) == 0) |
| return 0; |
| vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT; |
| /* The real channel for this device is zero */ |
| vtarget->channel = 0; |
| /* The actual physdisknum (for RAID passthrough) */ |
| vtarget->id = mptscsih_raid_id_to_num(ioc, 0, |
| starget->id); |
| } |
| |
| if (starget->channel == 0 && |
| mptspi_is_raid(hd, starget->id)) { |
| vtarget->raidVolume = 1; |
| ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| "RAID Volume @ channel=%d id=%d\n", ioc->name, starget->channel, |
| starget->id)); |
| } |
| |
| if (ioc->spi_data.nvram && |
| ioc->spi_data.nvram[starget->id] != MPT_HOST_NVRAM_INVALID) { |
| u32 nvram = ioc->spi_data.nvram[starget->id]; |
| spi_min_period(starget) = (nvram & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT; |
| spi_max_width(starget) = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1; |
| } else { |
| spi_min_period(starget) = ioc->spi_data.minSyncFactor; |
| spi_max_width(starget) = ioc->spi_data.maxBusWidth; |
| } |
| spi_max_offset(starget) = ioc->spi_data.maxSyncOffset; |
| |
| spi_offset(starget) = 0; |
| spi_period(starget) = 0xFF; |
| mptspi_write_width(starget, 0); |
| |
| return 0; |
| } |
| |
| static void |
| mptspi_target_destroy(struct scsi_target *starget) |
| { |
| kfree(starget->hostdata); |
| starget->hostdata = NULL; |
| } |
| |
| /** |
| * mptspi_print_write_nego - negotiation parameters debug info that is being sent |
| * @hd: Pointer to a SCSI HOST structure |
| * @starget: SCSI target |
| * @ii: negotiation parameters |
| * |
| */ |
| static void |
| mptspi_print_write_nego(struct _MPT_SCSI_HOST *hd, struct scsi_target *starget, u32 ii) |
| { |
| ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d Requested = 0x%08x" |
| " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n", |
| hd->ioc->name, starget->id, ii, |
| ii & MPI_SCSIDEVPAGE0_NP_WIDE ? "Wide ": "", |
| ((ii >> 8) & 0xFF), ((ii >> 16) & 0xFF), |
| ii & MPI_SCSIDEVPAGE0_NP_IU ? "IU ": "", |
| ii & MPI_SCSIDEVPAGE0_NP_DT ? "DT ": "", |
| ii & MPI_SCSIDEVPAGE0_NP_QAS ? "QAS ": "", |
| ii & MPI_SCSIDEVPAGE0_NP_HOLD_MCS ? "HOLDMCS ": "", |
| ii & MPI_SCSIDEVPAGE0_NP_WR_FLOW ? "WRFLOW ": "", |
| ii & MPI_SCSIDEVPAGE0_NP_RD_STRM ? "RDSTRM ": "", |
| ii & MPI_SCSIDEVPAGE0_NP_RTI ? "RTI ": "", |
| ii & MPI_SCSIDEVPAGE0_NP_PCOMP_EN ? "PCOMP ": "")); |
| } |
| |
| /** |
| * mptspi_print_read_nego - negotiation parameters debug info that is being read |
| * @hd: Pointer to a SCSI HOST structure |
| * @starget: SCSI target |
| * @ii: negotiation parameters |
| * |
| */ |
| static void |
| mptspi_print_read_nego(struct _MPT_SCSI_HOST *hd, struct scsi_target *starget, u32 ii) |
| { |
| ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d Read = 0x%08x" |
| " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n", |
| hd->ioc->name, starget->id, ii, |
| ii & MPI_SCSIDEVPAGE0_NP_WIDE ? "Wide ": "", |
| ((ii >> 8) & 0xFF), ((ii >> 16) & 0xFF), |
| ii & MPI_SCSIDEVPAGE0_NP_IU ? "IU ": "", |
| ii & MPI_SCSIDEVPAGE0_NP_DT ? "DT ": "", |
| ii & MPI_SCSIDEVPAGE0_NP_QAS ? "QAS ": "", |
| ii & MPI_SCSIDEVPAGE0_NP_HOLD_MCS ? "HOLDMCS ": "", |
| ii & MPI_SCSIDEVPAGE0_NP_WR_FLOW ? "WRFLOW ": "", |
| ii & MPI_SCSIDEVPAGE0_NP_RD_STRM ? "RDSTRM ": "", |
| ii & MPI_SCSIDEVPAGE0_NP_RTI ? "RTI ": "", |
| ii & MPI_SCSIDEVPAGE0_NP_PCOMP_EN ? "PCOMP ": "")); |
| } |
| |
| static int mptspi_read_spi_device_pg0(struct scsi_target *starget, |
| struct _CONFIG_PAGE_SCSI_DEVICE_0 *pass_pg0) |
| { |
| struct Scsi_Host *shost = dev_to_shost(&starget->dev); |
| struct _MPT_SCSI_HOST *hd = shost_priv(shost); |
| struct _MPT_ADAPTER *ioc = hd->ioc; |
| struct _CONFIG_PAGE_SCSI_DEVICE_0 *spi_dev_pg0; |
| dma_addr_t spi_dev_pg0_dma; |
| int size; |
| struct _x_config_parms cfg; |
| struct _CONFIG_PAGE_HEADER hdr; |
| int err = -EBUSY; |
| |
| /* No SPI parameters for RAID devices */ |
| if (starget->channel == 0 && |
| mptspi_is_raid(hd, starget->id)) |
| return -1; |
| |
| size = ioc->spi_data.sdp0length * 4; |
| /* |
| if (ioc->spi_data.sdp0length & 1) |
| size += size + 4; |
| size += 2048; |
| */ |
| |
| spi_dev_pg0 = dma_alloc_coherent(&ioc->pcidev->dev, size, &spi_dev_pg0_dma, GFP_KERNEL); |
| if (spi_dev_pg0 == NULL) { |
| starget_printk(KERN_ERR, starget, MYIOC_s_FMT |
| "dma_alloc_coherent for parameters failed\n", ioc->name); |
| return -EINVAL; |
| } |
| |
| memset(&hdr, 0, sizeof(hdr)); |
| |
| hdr.PageVersion = ioc->spi_data.sdp0version; |
| hdr.PageLength = ioc->spi_data.sdp0length; |
| hdr.PageNumber = 0; |
| hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; |
| |
| memset(&cfg, 0, sizeof(cfg)); |
| |
| cfg.cfghdr.hdr = &hdr; |
| cfg.physAddr = spi_dev_pg0_dma; |
| cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; |
| cfg.dir = 0; |
| cfg.pageAddr = starget->id; |
| cfg.timeout = 60; |
| |
| if (mpt_config(ioc, &cfg)) { |
| starget_printk(KERN_ERR, starget, MYIOC_s_FMT "mpt_config failed\n", ioc->name); |
| goto out_free; |
| } |
| err = 0; |
| memcpy(pass_pg0, spi_dev_pg0, size); |
| |
| mptspi_print_read_nego(hd, starget, le32_to_cpu(spi_dev_pg0->NegotiatedParameters)); |
| |
| out_free: |
| dma_free_coherent(&ioc->pcidev->dev, size, spi_dev_pg0, spi_dev_pg0_dma); |
| return err; |
| } |
| |
| static u32 mptspi_getRP(struct scsi_target *starget) |
| { |
| u32 nego = 0; |
| |
| nego |= spi_iu(starget) ? MPI_SCSIDEVPAGE1_RP_IU : 0; |
| nego |= spi_dt(starget) ? MPI_SCSIDEVPAGE1_RP_DT : 0; |
| nego |= spi_qas(starget) ? MPI_SCSIDEVPAGE1_RP_QAS : 0; |
| nego |= spi_hold_mcs(starget) ? MPI_SCSIDEVPAGE1_RP_HOLD_MCS : 0; |
| nego |= spi_wr_flow(starget) ? MPI_SCSIDEVPAGE1_RP_WR_FLOW : 0; |
| nego |= spi_rd_strm(starget) ? MPI_SCSIDEVPAGE1_RP_RD_STRM : 0; |
| nego |= spi_rti(starget) ? MPI_SCSIDEVPAGE1_RP_RTI : 0; |
| nego |= spi_pcomp_en(starget) ? MPI_SCSIDEVPAGE1_RP_PCOMP_EN : 0; |
| |
| nego |= (spi_period(starget) << MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD) & MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK; |
| nego |= (spi_offset(starget) << MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET) & MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK; |
| nego |= spi_width(starget) ? MPI_SCSIDEVPAGE1_RP_WIDE : 0; |
| |
| return nego; |
| } |
| |
| static void mptspi_read_parameters(struct scsi_target *starget) |
| { |
| int nego; |
| struct _CONFIG_PAGE_SCSI_DEVICE_0 spi_dev_pg0; |
| |
| mptspi_read_spi_device_pg0(starget, &spi_dev_pg0); |
| |
| nego = le32_to_cpu(spi_dev_pg0.NegotiatedParameters); |
| |
| spi_iu(starget) = (nego & MPI_SCSIDEVPAGE0_NP_IU) ? 1 : 0; |
| spi_dt(starget) = (nego & MPI_SCSIDEVPAGE0_NP_DT) ? 1 : 0; |
| spi_qas(starget) = (nego & MPI_SCSIDEVPAGE0_NP_QAS) ? 1 : 0; |
| spi_wr_flow(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WR_FLOW) ? 1 : 0; |
| spi_rd_strm(starget) = (nego & MPI_SCSIDEVPAGE0_NP_RD_STRM) ? 1 : 0; |
| spi_rti(starget) = (nego & MPI_SCSIDEVPAGE0_NP_RTI) ? 1 : 0; |
| spi_pcomp_en(starget) = (nego & MPI_SCSIDEVPAGE0_NP_PCOMP_EN) ? 1 : 0; |
| spi_hold_mcs(starget) = (nego & MPI_SCSIDEVPAGE0_NP_HOLD_MCS) ? 1 : 0; |
| spi_period(starget) = (nego & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD; |
| spi_offset(starget) = (nego & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET; |
| spi_width(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WIDE) ? 1 : 0; |
| } |
| |
| static int |
| mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, u8 channel, u8 id) |
| { |
| MPT_ADAPTER *ioc = hd->ioc; |
| MpiRaidActionRequest_t *pReq; |
| MPT_FRAME_HDR *mf; |
| int ret; |
| unsigned long timeleft; |
| |
| mutex_lock(&ioc->internal_cmds.mutex); |
| |
| /* Get and Populate a free Frame |
| */ |
| if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) { |
| dfailprintk(hd->ioc, printk(MYIOC_s_WARN_FMT |
| "%s: no msg frames!\n", ioc->name, __func__)); |
| ret = -EAGAIN; |
| goto out; |
| } |
| pReq = (MpiRaidActionRequest_t *)mf; |
| if (quiesce) |
| pReq->Action = MPI_RAID_ACTION_QUIESCE_PHYS_IO; |
| else |
| pReq->Action = MPI_RAID_ACTION_ENABLE_PHYS_IO; |
| pReq->Reserved1 = 0; |
| pReq->ChainOffset = 0; |
| pReq->Function = MPI_FUNCTION_RAID_ACTION; |
| pReq->VolumeID = id; |
| pReq->VolumeBus = channel; |
| pReq->PhysDiskNum = 0; |
| pReq->MsgFlags = 0; |
| pReq->Reserved2 = 0; |
| pReq->ActionDataWord = 0; /* Reserved for this action */ |
| |
| ioc->add_sge((char *)&pReq->ActionDataSGE, |
| MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1); |
| |
| ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RAID Volume action=%x channel=%d id=%d\n", |
| ioc->name, pReq->Action, channel, id)); |
| |
| INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status) |
| mpt_put_msg_frame(ioc->InternalCtx, ioc, mf); |
| timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done, 10*HZ); |
| if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) { |
| ret = -ETIME; |
| dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: TIMED OUT!\n", |
| ioc->name, __func__)); |
| if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) |
| goto out; |
| if (!timeleft) { |
| printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n", |
| ioc->name, __func__); |
| mpt_HardResetHandler(ioc, CAN_SLEEP); |
| mpt_free_msg_frame(ioc, mf); |
| } |
| goto out; |
| } |
| |
| ret = ioc->internal_cmds.completion_code; |
| |
| out: |
| CLEAR_MGMT_STATUS(ioc->internal_cmds.status) |
| mutex_unlock(&ioc->internal_cmds.mutex); |
| return ret; |
| } |
| |
| static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd, |
| struct scsi_device *sdev) |
| { |
| VirtTarget *vtarget = scsi_target(sdev)->hostdata; |
| MPT_ADAPTER *ioc = hd->ioc; |
| |
| /* no DV on RAID devices */ |
| if (sdev->channel == 0 && |
| mptspi_is_raid(hd, sdev->id)) |
| return; |
| |
| /* If this is a piece of a RAID, then quiesce first */ |
| if (sdev->channel == 1 && |
| mptscsih_quiesce_raid(hd, 1, vtarget->channel, vtarget->id) < 0) { |
| starget_printk(KERN_ERR, scsi_target(sdev), MYIOC_s_FMT |
| "Integrated RAID quiesce failed\n", ioc->name); |
| return; |
| } |
| |
| hd->spi_pending |= (1 << sdev->id); |
| spi_dv_device(sdev); |
| hd->spi_pending &= ~(1 << sdev->id); |
| |
| if (sdev->channel == 1 && |
| mptscsih_quiesce_raid(hd, 0, vtarget->channel, vtarget->id) < 0) |
| starget_printk(KERN_ERR, scsi_target(sdev), MYIOC_s_FMT |
| "Integrated RAID resume failed\n", ioc->name); |
| |
| mptspi_read_parameters(sdev->sdev_target); |
| spi_display_xfer_agreement(sdev->sdev_target); |
| mptspi_read_parameters(sdev->sdev_target); |
| } |
| |
| static int mptspi_slave_alloc(struct scsi_device *sdev) |
| { |
| MPT_SCSI_HOST *hd = shost_priv(sdev->host); |
| VirtTarget *vtarget; |
| VirtDevice *vdevice; |
| struct scsi_target *starget; |
| MPT_ADAPTER *ioc = hd->ioc; |
| |
| if (sdev->channel == 1 && |
| mptscsih_is_phys_disk(ioc, 0, sdev->id) == 0) |
| return -ENXIO; |
| |
| vdevice = kzalloc(sizeof(VirtDevice), GFP_KERNEL); |
| if (!vdevice) { |
| printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n", |
| ioc->name, sizeof(VirtDevice)); |
| return -ENOMEM; |
| } |
| |
| vdevice->lun = sdev->lun; |
| sdev->hostdata = vdevice; |
| |
| starget = scsi_target(sdev); |
| vtarget = starget->hostdata; |
| vdevice->vtarget = vtarget; |
| vtarget->num_luns++; |
| |
| if (sdev->channel == 1) |
| sdev->no_uld_attach = 1; |
| |
| return 0; |
| } |
| |
| static int mptspi_slave_configure(struct scsi_device *sdev) |
| { |
| struct _MPT_SCSI_HOST *hd = shost_priv(sdev->host); |
| VirtTarget *vtarget = scsi_target(sdev)->hostdata; |
| int ret; |
| |
| mptspi_initTarget(hd, vtarget, sdev); |
| |
| ret = mptscsih_slave_configure(sdev); |
| |
| if (ret) |
| return ret; |
| |
| ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d min_period=0x%02x" |
| " max_offset=0x%02x max_width=%d\n", hd->ioc->name, |
| sdev->id, spi_min_period(scsi_target(sdev)), |
| spi_max_offset(scsi_target(sdev)), |
| spi_max_width(scsi_target(sdev)))); |
| |
| if ((sdev->channel == 1 || |
| !(mptspi_is_raid(hd, sdev->id))) && |
| !spi_initial_dv(sdev->sdev_target)) |
| mptspi_dv_device(hd, sdev); |
| |
| return 0; |
| } |
| |
| static int |
| mptspi_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *SCpnt) |
| { |
| struct _MPT_SCSI_HOST *hd = shost_priv(shost); |
| VirtDevice *vdevice = SCpnt->device->hostdata; |
| MPT_ADAPTER *ioc = hd->ioc; |
| |
| if (!vdevice || !vdevice->vtarget) { |
| SCpnt->result = DID_NO_CONNECT << 16; |
| scsi_done(SCpnt); |
| return 0; |
| } |
| |
| if (SCpnt->device->channel == 1 && |
| mptscsih_is_phys_disk(ioc, 0, SCpnt->device->id) == 0) { |
| SCpnt->result = DID_NO_CONNECT << 16; |
| scsi_done(SCpnt); |
| return 0; |
| } |
| |
| if (spi_dv_pending(scsi_target(SCpnt->device))) |
| ddvprintk(ioc, scsi_print_command(SCpnt)); |
| |
| return mptscsih_qcmd(SCpnt); |
| } |
| |
| static void mptspi_slave_destroy(struct scsi_device *sdev) |
| { |
| struct scsi_target *starget = scsi_target(sdev); |
| VirtTarget *vtarget = starget->hostdata; |
| VirtDevice *vdevice = sdev->hostdata; |
| |
| /* Will this be the last lun on a non-raid device? */ |
| if (vtarget->num_luns == 1 && vdevice->configured_lun) { |
| struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; |
| |
| /* Async Narrow */ |
| pg1.RequestedParameters = 0; |
| pg1.Reserved = 0; |
| pg1.Configuration = 0; |
| |
| mptspi_write_spi_device_pg1(starget, &pg1); |
| } |
| |
| mptscsih_slave_destroy(sdev); |
| } |
| |
| static struct scsi_host_template mptspi_driver_template = { |
| .module = THIS_MODULE, |
| .proc_name = "mptspi", |
| .show_info = mptscsih_show_info, |
| .name = "MPT SPI Host", |
| .info = mptscsih_info, |
| .queuecommand = mptspi_qcmd, |
| .target_alloc = mptspi_target_alloc, |
| .slave_alloc = mptspi_slave_alloc, |
| .slave_configure = mptspi_slave_configure, |
| .target_destroy = mptspi_target_destroy, |
| .slave_destroy = mptspi_slave_destroy, |
| .change_queue_depth = mptscsih_change_queue_depth, |
| .eh_abort_handler = mptscsih_abort, |
| .eh_device_reset_handler = mptscsih_dev_reset, |
| .eh_bus_reset_handler = mptscsih_bus_reset, |
| .eh_host_reset_handler = mptscsih_host_reset, |
| .bios_param = mptscsih_bios_param, |
| .can_queue = MPT_SCSI_CAN_QUEUE, |
| .this_id = -1, |
| .sg_tablesize = MPT_SCSI_SG_DEPTH, |
| .max_sectors = 8192, |
| .cmd_per_lun = 7, |
| .shost_groups = mptscsih_host_attr_groups, |
| }; |
| |
| static int mptspi_write_spi_device_pg1(struct scsi_target *starget, |
| struct _CONFIG_PAGE_SCSI_DEVICE_1 *pass_pg1) |
| { |
| struct Scsi_Host *shost = dev_to_shost(&starget->dev); |
| struct _MPT_SCSI_HOST *hd = shost_priv(shost); |
| struct _MPT_ADAPTER *ioc = hd->ioc; |
| struct _CONFIG_PAGE_SCSI_DEVICE_1 *pg1; |
| dma_addr_t pg1_dma; |
| int size; |
| struct _x_config_parms cfg; |
| struct _CONFIG_PAGE_HEADER hdr; |
| int err = -EBUSY; |
| u32 nego_parms; |
| u32 period; |
| struct scsi_device *sdev; |
| int i; |
| |
| /* don't allow updating nego parameters on RAID devices */ |
| if (starget->channel == 0 && |
| mptspi_is_raid(hd, starget->id)) |
| return -1; |
| |
| size = ioc->spi_data.sdp1length * 4; |
| |
| pg1 = dma_alloc_coherent(&ioc->pcidev->dev, size, &pg1_dma, GFP_KERNEL); |
| if (pg1 == NULL) { |
| starget_printk(KERN_ERR, starget, MYIOC_s_FMT |
| "dma_alloc_coherent for parameters failed\n", ioc->name); |
| return -EINVAL; |
| } |
| |
| memset(&hdr, 0, sizeof(hdr)); |
| |
| hdr.PageVersion = ioc->spi_data.sdp1version; |
| hdr.PageLength = ioc->spi_data.sdp1length; |
| hdr.PageNumber = 1; |
| hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE; |
| |
| memset(&cfg, 0, sizeof(cfg)); |
| |
| cfg.cfghdr.hdr = &hdr; |
| cfg.physAddr = pg1_dma; |
| cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT; |
| cfg.dir = 1; |
| cfg.pageAddr = starget->id; |
| |
| memcpy(pg1, pass_pg1, size); |
| |
| pg1->Header.PageVersion = hdr.PageVersion; |
| pg1->Header.PageLength = hdr.PageLength; |
| pg1->Header.PageNumber = hdr.PageNumber; |
| pg1->Header.PageType = hdr.PageType; |
| |
| nego_parms = le32_to_cpu(pg1->RequestedParameters); |
| period = (nego_parms & MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK) >> |
| MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD; |
| if (period == 8) { |
| /* Turn on inline data padding for TAPE when running U320 */ |
| for (i = 0 ; i < 16; i++) { |
| sdev = scsi_device_lookup_by_target(starget, i); |
| if (sdev && sdev->type == TYPE_TAPE) { |
| sdev_printk(KERN_DEBUG, sdev, MYIOC_s_FMT |
| "IDP:ON\n", ioc->name); |
| nego_parms |= MPI_SCSIDEVPAGE1_RP_IDP; |
| pg1->RequestedParameters = |
| cpu_to_le32(nego_parms); |
| break; |
| } |
| } |
| } |
| |
| mptspi_print_write_nego(hd, starget, le32_to_cpu(pg1->RequestedParameters)); |
| |
| if (mpt_config(ioc, &cfg)) { |
| starget_printk(KERN_ERR, starget, MYIOC_s_FMT |
| "mpt_config failed\n", ioc->name); |
| goto out_free; |
| } |
| err = 0; |
| |
| out_free: |
| dma_free_coherent(&ioc->pcidev->dev, size, pg1, pg1_dma); |
| return err; |
| } |
| |
| static void mptspi_write_offset(struct scsi_target *starget, int offset) |
| { |
| struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; |
| u32 nego; |
| |
| if (offset < 0) |
| offset = 0; |
| |
| if (offset > 255) |
| offset = 255; |
| |
| if (spi_offset(starget) == -1) |
| mptspi_read_parameters(starget); |
| |
| spi_offset(starget) = offset; |
| |
| nego = mptspi_getRP(starget); |
| |
| pg1.RequestedParameters = cpu_to_le32(nego); |
| pg1.Reserved = 0; |
| pg1.Configuration = 0; |
| |
| mptspi_write_spi_device_pg1(starget, &pg1); |
| } |
| |
| static void mptspi_write_period(struct scsi_target *starget, int period) |
| { |
| struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; |
| u32 nego; |
| |
| if (period < 8) |
| period = 8; |
| |
| if (period > 255) |
| period = 255; |
| |
| if (spi_period(starget) == -1) |
| mptspi_read_parameters(starget); |
| |
| if (period == 8) { |
| spi_iu(starget) = 1; |
| spi_dt(starget) = 1; |
| } else if (period == 9) { |
| spi_dt(starget) = 1; |
| } |
| |
| spi_period(starget) = period; |
| |
| nego = mptspi_getRP(starget); |
| |
| pg1.RequestedParameters = cpu_to_le32(nego); |
| pg1.Reserved = 0; |
| pg1.Configuration = 0; |
| |
| mptspi_write_spi_device_pg1(starget, &pg1); |
| } |
| |
| static void mptspi_write_dt(struct scsi_target *starget, int dt) |
| { |
| struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; |
| u32 nego; |
| |
| if (spi_period(starget) == -1) |
| mptspi_read_parameters(starget); |
| |
| if (!dt && spi_period(starget) < 10) |
| spi_period(starget) = 10; |
| |
| spi_dt(starget) = dt; |
| |
| nego = mptspi_getRP(starget); |
| |
| |
| pg1.RequestedParameters = cpu_to_le32(nego); |
| pg1.Reserved = 0; |
| pg1.Configuration = 0; |
| |
| mptspi_write_spi_device_pg1(starget, &pg1); |
| } |
| |
| static void mptspi_write_iu(struct scsi_target *starget, int iu) |
| { |
| struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; |
| u32 nego; |
| |
| if (spi_period(starget) == -1) |
| mptspi_read_parameters(starget); |
| |
| if (!iu && spi_period(starget) < 9) |
| spi_period(starget) = 9; |
| |
| spi_iu(starget) = iu; |
| |
| nego = mptspi_getRP(starget); |
| |
| pg1.RequestedParameters = cpu_to_le32(nego); |
| pg1.Reserved = 0; |
| pg1.Configuration = 0; |
| |
| mptspi_write_spi_device_pg1(starget, &pg1); |
| } |
| |
| #define MPTSPI_SIMPLE_TRANSPORT_PARM(parm) \ |
| static void mptspi_write_##parm(struct scsi_target *starget, int parm)\ |
| { \ |
| struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; \ |
| u32 nego; \ |
| \ |
| spi_##parm(starget) = parm; \ |
| \ |
| nego = mptspi_getRP(starget); \ |
| \ |
| pg1.RequestedParameters = cpu_to_le32(nego); \ |
| pg1.Reserved = 0; \ |
| pg1.Configuration = 0; \ |
| \ |
| mptspi_write_spi_device_pg1(starget, &pg1); \ |
| } |
| |
| MPTSPI_SIMPLE_TRANSPORT_PARM(rd_strm) |
| MPTSPI_SIMPLE_TRANSPORT_PARM(wr_flow) |
| MPTSPI_SIMPLE_TRANSPORT_PARM(rti) |
| MPTSPI_SIMPLE_TRANSPORT_PARM(hold_mcs) |
| MPTSPI_SIMPLE_TRANSPORT_PARM(pcomp_en) |
| |
| static void mptspi_write_qas(struct scsi_target *starget, int qas) |
| { |
| struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; |
| struct Scsi_Host *shost = dev_to_shost(&starget->dev); |
| struct _MPT_SCSI_HOST *hd = shost_priv(shost); |
| VirtTarget *vtarget = starget->hostdata; |
| u32 nego; |
| |
| if ((vtarget->negoFlags & MPT_TARGET_NO_NEGO_QAS) || |
| hd->ioc->spi_data.noQas) |
| spi_qas(starget) = 0; |
| else |
| spi_qas(starget) = qas; |
| |
| nego = mptspi_getRP(starget); |
| |
| pg1.RequestedParameters = cpu_to_le32(nego); |
| pg1.Reserved = 0; |
| pg1.Configuration = 0; |
| |
| mptspi_write_spi_device_pg1(starget, &pg1); |
| } |
| |
| static void mptspi_write_width(struct scsi_target *starget, int width) |
| { |
| struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; |
| u32 nego; |
| |
| if (!width) { |
| spi_dt(starget) = 0; |
| if (spi_period(starget) < 10) |
| spi_period(starget) = 10; |
| } |
| |
| spi_width(starget) = width; |
| |
| nego = mptspi_getRP(starget); |
| |
| pg1.RequestedParameters = cpu_to_le32(nego); |
| pg1.Reserved = 0; |
| pg1.Configuration = 0; |
| |
| mptspi_write_spi_device_pg1(starget, &pg1); |
| } |
| |
| struct work_queue_wrapper { |
| struct work_struct work; |
| struct _MPT_SCSI_HOST *hd; |
| int disk; |
| }; |
| |
| static void mpt_work_wrapper(struct work_struct *work) |
| { |
| struct work_queue_wrapper *wqw = |
| container_of(work, struct work_queue_wrapper, work); |
| struct _MPT_SCSI_HOST *hd = wqw->hd; |
| MPT_ADAPTER *ioc = hd->ioc; |
| struct Scsi_Host *shost = ioc->sh; |
| struct scsi_device *sdev; |
| int disk = wqw->disk; |
| struct _CONFIG_PAGE_IOC_3 *pg3; |
| |
| kfree(wqw); |
| |
| mpt_findImVolumes(ioc); |
| pg3 = ioc->raid_data.pIocPg3; |
| if (!pg3) |
| return; |
| |
| shost_for_each_device(sdev,shost) { |
| struct scsi_target *starget = scsi_target(sdev); |
| VirtTarget *vtarget = starget->hostdata; |
| |
| /* only want to search RAID components */ |
| if (sdev->channel != 1) |
| continue; |
| |
| /* The id is the raid PhysDiskNum, even if |
| * starget->id is the actual target address */ |
| if(vtarget->id != disk) |
| continue; |
| |
| starget_printk(KERN_INFO, vtarget->starget, MYIOC_s_FMT |
| "Integrated RAID requests DV of new device\n", ioc->name); |
| mptspi_dv_device(hd, sdev); |
| } |
| shost_printk(KERN_INFO, shost, MYIOC_s_FMT |
| "Integrated RAID detects new device %d\n", ioc->name, disk); |
| scsi_scan_target(&ioc->sh->shost_gendev, 1, disk, 0, SCSI_SCAN_RESCAN); |
| } |
| |
| |
| static void mpt_dv_raid(struct _MPT_SCSI_HOST *hd, int disk) |
| { |
| struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC); |
| MPT_ADAPTER *ioc = hd->ioc; |
| |
| if (!wqw) { |
| shost_printk(KERN_ERR, ioc->sh, MYIOC_s_FMT |
| "Failed to act on RAID event for physical disk %d\n", |
| ioc->name, disk); |
| return; |
| } |
| INIT_WORK(&wqw->work, mpt_work_wrapper); |
| wqw->hd = hd; |
| wqw->disk = disk; |
| |
| schedule_work(&wqw->work); |
| } |
| |
| static int |
| mptspi_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) |
| { |
| u8 event = le32_to_cpu(pEvReply->Event) & 0xFF; |
| struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh); |
| |
| if (ioc->bus_type != SPI) |
| return 0; |
| |
| if (hd && event == MPI_EVENT_INTEGRATED_RAID) { |
| int reason |
| = (le32_to_cpu(pEvReply->Data[0]) & 0x00FF0000) >> 16; |
| |
| if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) { |
| int disk = (le32_to_cpu(pEvReply->Data[0]) & 0xFF000000) >> 24; |
| mpt_dv_raid(hd, disk); |
| } |
| } |
| return mptscsih_event_process(ioc, pEvReply); |
| } |
| |
| static int |
| mptspi_deny_binding(struct scsi_target *starget) |
| { |
| struct _MPT_SCSI_HOST *hd = |
| (struct _MPT_SCSI_HOST *)dev_to_shost(starget->dev.parent)->hostdata; |
| return ((mptspi_is_raid(hd, starget->id)) && |
| starget->channel == 0) ? 1 : 0; |
| } |
| |
| static struct spi_function_template mptspi_transport_functions = { |
| .get_offset = mptspi_read_parameters, |
| .set_offset = mptspi_write_offset, |
| .show_offset = 1, |
| .get_period = mptspi_read_parameters, |
| .set_period = mptspi_write_period, |
| .show_period = 1, |
| .get_width = mptspi_read_parameters, |
| .set_width = mptspi_write_width, |
| .show_width = 1, |
| .get_iu = mptspi_read_parameters, |
| .set_iu = mptspi_write_iu, |
| .show_iu = 1, |
| .get_dt = mptspi_read_parameters, |
| .set_dt = mptspi_write_dt, |
| .show_dt = 1, |
| .get_qas = mptspi_read_parameters, |
| .set_qas = mptspi_write_qas, |
| .show_qas = 1, |
| .get_wr_flow = mptspi_read_parameters, |
| .set_wr_flow = mptspi_write_wr_flow, |
| .show_wr_flow = 1, |
| .get_rd_strm = mptspi_read_parameters, |
| .set_rd_strm = mptspi_write_rd_strm, |
| .show_rd_strm = 1, |
| .get_rti = mptspi_read_parameters, |
| .set_rti = mptspi_write_rti, |
| .show_rti = 1, |
| .get_pcomp_en = mptspi_read_parameters, |
| .set_pcomp_en = mptspi_write_pcomp_en, |
| .show_pcomp_en = 1, |
| .get_hold_mcs = mptspi_read_parameters, |
| .set_hold_mcs = mptspi_write_hold_mcs, |
| .show_hold_mcs = 1, |
| .deny_binding = mptspi_deny_binding, |
| }; |
| |
| /**************************************************************************** |
| * Supported hardware |
| */ |
| |
| static struct pci_device_id mptspi_pci_table[] = { |
| { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1030, |
| PCI_ANY_ID, PCI_ANY_ID }, |
| { PCI_VENDOR_ID_ATTO, MPI_MANUFACTPAGE_DEVID_53C1030, |
| PCI_ANY_ID, PCI_ANY_ID }, |
| { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1035, |
| PCI_ANY_ID, PCI_ANY_ID }, |
| {0} /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE(pci, mptspi_pci_table); |
| |
| |
| /* |
| * renegotiate for a given target |
| */ |
| static void |
| mptspi_dv_renegotiate_work(struct work_struct *work) |
| { |
| struct work_queue_wrapper *wqw = |
| container_of(work, struct work_queue_wrapper, work); |
| struct _MPT_SCSI_HOST *hd = wqw->hd; |
| struct scsi_device *sdev; |
| struct scsi_target *starget; |
| struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; |
| u32 nego; |
| MPT_ADAPTER *ioc = hd->ioc; |
| |
| kfree(wqw); |
| |
| if (hd->spi_pending) { |
| shost_for_each_device(sdev, ioc->sh) { |
| if (hd->spi_pending & (1 << sdev->id)) |
| continue; |
| starget = scsi_target(sdev); |
| nego = mptspi_getRP(starget); |
| pg1.RequestedParameters = cpu_to_le32(nego); |
| pg1.Reserved = 0; |
| pg1.Configuration = 0; |
| mptspi_write_spi_device_pg1(starget, &pg1); |
| } |
| } else { |
| shost_for_each_device(sdev, ioc->sh) |
| mptspi_dv_device(hd, sdev); |
| } |
| } |
| |
| static void |
| mptspi_dv_renegotiate(struct _MPT_SCSI_HOST *hd) |
| { |
| struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC); |
| |
| if (!wqw) |
| return; |
| |
| INIT_WORK(&wqw->work, mptspi_dv_renegotiate_work); |
| wqw->hd = hd; |
| |
| schedule_work(&wqw->work); |
| } |
| |
| /* |
| * spi module reset handler |
| */ |
| static int |
| mptspi_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) |
| { |
| int rc; |
| |
| rc = mptscsih_ioc_reset(ioc, reset_phase); |
| if ((ioc->bus_type != SPI) || (!rc)) |
| return rc; |
| |
| /* only try to do a renegotiation if we're properly set up |
| * if we get an ioc fault on bringup, ioc->sh will be NULL */ |
| if (reset_phase == MPT_IOC_POST_RESET && |
| ioc->sh) { |
| struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh); |
| |
| mptspi_dv_renegotiate(hd); |
| } |
| |
| return rc; |
| } |
| |
| #ifdef CONFIG_PM |
| /* |
| * spi module resume handler |
| */ |
| static int |
| mptspi_resume(struct pci_dev *pdev) |
| { |
| MPT_ADAPTER *ioc = pci_get_drvdata(pdev); |
| struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh); |
| int rc; |
| |
| rc = mptscsih_resume(pdev); |
| mptspi_dv_renegotiate(hd); |
| |
| return rc; |
| } |
| #endif |
| |
| /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| /* |
| * mptspi_probe - Installs scsi devices per bus. |
| * @pdev: Pointer to pci_dev structure |
| * |
| * Returns 0 for success, non-zero for failure. |
| * |
| */ |
| static int |
| mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| { |
| struct Scsi_Host *sh; |
| MPT_SCSI_HOST *hd; |
| MPT_ADAPTER *ioc; |
| unsigned long flags; |
| int ii; |
| int numSGE = 0; |
| int scale; |
| int ioc_cap; |
| int error=0; |
| int r; |
| |
| if ((r = mpt_attach(pdev,id)) != 0) |
| return r; |
| |
| ioc = pci_get_drvdata(pdev); |
| ioc->DoneCtx = mptspiDoneCtx; |
| ioc->TaskCtx = mptspiTaskCtx; |
| ioc->InternalCtx = mptspiInternalCtx; |
| |
| /* Added sanity check on readiness of the MPT adapter. |
| */ |
| if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) { |
| printk(MYIOC_s_WARN_FMT |
| "Skipping because it's not operational!\n", |
| ioc->name); |
| error = -ENODEV; |
| goto out_mptspi_probe; |
| } |
| |
| if (!ioc->active) { |
| printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", |
| ioc->name); |
| error = -ENODEV; |
| goto out_mptspi_probe; |
| } |
| |
| /* Sanity check - ensure at least 1 port is INITIATOR capable |
| */ |
| ioc_cap = 0; |
| for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) { |
| if (ioc->pfacts[ii].ProtocolFlags & |
| MPI_PORTFACTS_PROTOCOL_INITIATOR) |
| ioc_cap ++; |
| } |
| |
| if (!ioc_cap) { |
| printk(MYIOC_s_WARN_FMT |
| "Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n", |
| ioc->name, ioc); |
| return 0; |
| } |
| |
| sh = scsi_host_alloc(&mptspi_driver_template, sizeof(MPT_SCSI_HOST)); |
| |
| if (!sh) { |
| printk(MYIOC_s_WARN_FMT |
| "Unable to register controller with SCSI subsystem\n", |
| ioc->name); |
| error = -1; |
| goto out_mptspi_probe; |
| } |
| |
| /* VMWare emulation doesn't properly implement WRITE_SAME |
| */ |
| if (pdev->subsystem_vendor == 0x15AD) |
| sh->no_write_same = 1; |
| |
| spin_lock_irqsave(&ioc->FreeQlock, flags); |
| |
| /* Attach the SCSI Host to the IOC structure |
| */ |
| ioc->sh = sh; |
| |
| sh->io_port = 0; |
| sh->n_io_port = 0; |
| sh->irq = 0; |
| |
| /* set 16 byte cdb's */ |
| sh->max_cmd_len = 16; |
| |
| /* Yikes! This is important! |
| * Otherwise, by default, linux |
| * only scans target IDs 0-7! |
| * pfactsN->MaxDevices unreliable |
| * (not supported in early |
| * versions of the FW). |
| * max_id = 1 + actual max id, |
| * max_lun = 1 + actual last lun, |
| * see hosts.h :o( |
| */ |
| sh->max_id = ioc->devices_per_bus; |
| |
| sh->max_lun = MPT_LAST_LUN + 1; |
| /* |
| * If RAID Firmware Detected, setup virtual channel |
| */ |
| if (ioc->ir_firmware) |
| sh->max_channel = 1; |
| else |
| sh->max_channel = 0; |
| sh->this_id = ioc->pfacts[0].PortSCSIID; |
| |
| /* Required entry. |
| */ |
| sh->unique_id = ioc->id; |
| |
| /* Verify that we won't exceed the maximum |
| * number of chain buffers |
| * We can optimize: ZZ = req_sz/sizeof(SGE) |
| * For 32bit SGE's: |
| * numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ |
| * + (req_sz - 64)/sizeof(SGE) |
| * A slightly different algorithm is required for |
| * 64bit SGEs. |
| */ |
| scale = ioc->req_sz/ioc->SGE_size; |
| if (ioc->sg_addr_size == sizeof(u64)) { |
| numSGE = (scale - 1) * |
| (ioc->facts.MaxChainDepth-1) + scale + |
| (ioc->req_sz - 60) / ioc->SGE_size; |
| } else { |
| numSGE = 1 + (scale - 1) * |
| (ioc->facts.MaxChainDepth-1) + scale + |
| (ioc->req_sz - 64) / ioc->SGE_size; |
| } |
| |
| if (numSGE < sh->sg_tablesize) { |
| /* Reset this value */ |
| dprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| "Resetting sg_tablesize to %d from %d\n", |
| ioc->name, numSGE, sh->sg_tablesize)); |
| sh->sg_tablesize = numSGE; |
| } |
| |
| spin_unlock_irqrestore(&ioc->FreeQlock, flags); |
| |
| hd = shost_priv(sh); |
| hd->ioc = ioc; |
| |
| /* SCSI needs scsi_cmnd lookup table! |
| * (with size equal to req_depth*PtrSz!) |
| */ |
| ioc->ScsiLookup = kcalloc(ioc->req_depth, sizeof(void *), GFP_KERNEL); |
| if (!ioc->ScsiLookup) { |
| error = -ENOMEM; |
| goto out_mptspi_probe; |
| } |
| spin_lock_init(&ioc->scsi_lookup_lock); |
| |
| dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n", |
| ioc->name, ioc->ScsiLookup)); |
| |
| ioc->spi_data.Saf_Te = mpt_saf_te; |
| ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT |
| "saf_te %x\n", |
| ioc->name, |
| mpt_saf_te)); |
| ioc->spi_data.noQas = 0; |
| |
| hd->last_queue_full = 0; |
| hd->spi_pending = 0; |
| |
| /* Some versions of the firmware don't support page 0; without |
| * that we can't get the parameters */ |
| if (ioc->spi_data.sdp0length != 0) |
| sh->transportt = mptspi_transport_template; |
| |
| error = scsi_add_host (sh, &ioc->pcidev->dev); |
| if(error) { |
| dprintk(ioc, printk(MYIOC_s_ERR_FMT |
| "scsi_add_host failed\n", ioc->name)); |
| goto out_mptspi_probe; |
| } |
| |
| /* |
| * issue internal bus reset |
| */ |
| if (ioc->spi_data.bus_reset) |
| mptscsih_IssueTaskMgmt(hd, |
| MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, |
| 0, 0, 0, 0, 5); |
| |
| scsi_scan_host(sh); |
| return 0; |
| |
| out_mptspi_probe: |
| |
| mptscsih_remove(pdev); |
| return error; |
| } |
| |
| static void mptspi_remove(struct pci_dev *pdev) |
| { |
| MPT_ADAPTER *ioc = pci_get_drvdata(pdev); |
| |
| scsi_remove_host(ioc->sh); |
| mptscsih_remove(pdev); |
| } |
| |
| static struct pci_driver mptspi_driver = { |
| .name = "mptspi", |
| .id_table = mptspi_pci_table, |
| .probe = mptspi_probe, |
| .remove = mptspi_remove, |
| .shutdown = mptscsih_shutdown, |
| #ifdef CONFIG_PM |
| .suspend = mptscsih_suspend, |
| .resume = mptspi_resume, |
| #endif |
| }; |
| |
| /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| /** |
| * mptspi_init - Register MPT adapter(s) as SCSI host(s) with SCSI mid-layer. |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| static int __init |
| mptspi_init(void) |
| { |
| int error; |
| |
| show_mptmod_ver(my_NAME, my_VERSION); |
| |
| mptspi_transport_template = spi_attach_transport(&mptspi_transport_functions); |
| if (!mptspi_transport_template) |
| return -ENODEV; |
| |
| mptspiDoneCtx = mpt_register(mptscsih_io_done, MPTSPI_DRIVER, |
| "mptscsih_io_done"); |
| mptspiTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSPI_DRIVER, |
| "mptscsih_taskmgmt_complete"); |
| mptspiInternalCtx = mpt_register(mptscsih_scandv_complete, |
| MPTSPI_DRIVER, "mptscsih_scandv_complete"); |
| |
| mpt_event_register(mptspiDoneCtx, mptspi_event_process); |
| mpt_reset_register(mptspiDoneCtx, mptspi_ioc_reset); |
| |
| error = pci_register_driver(&mptspi_driver); |
| if (error) |
| spi_release_transport(mptspi_transport_template); |
| |
| return error; |
| } |
| |
| /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ |
| /** |
| * mptspi_exit - Unregisters MPT adapter(s) |
| */ |
| static void __exit |
| mptspi_exit(void) |
| { |
| pci_unregister_driver(&mptspi_driver); |
| |
| mpt_reset_deregister(mptspiDoneCtx); |
| mpt_event_deregister(mptspiDoneCtx); |
| |
| mpt_deregister(mptspiInternalCtx); |
| mpt_deregister(mptspiTaskCtx); |
| mpt_deregister(mptspiDoneCtx); |
| spi_release_transport(mptspi_transport_template); |
| } |
| |
| module_init(mptspi_init); |
| module_exit(mptspi_exit); |