blob: 9f6c99c1d87b4a343c05d2c2a589d1b60e675bf1 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
menu "HD-Audio"
config SND_HDA
tristate
select SND_PCM
select SND_VMASTER
select SND_JACK
select SND_HDA_CORE
config SND_HDA_GENERIC_LEDS
bool
config SND_HDA_INTEL
tristate "HD Audio PCI"
depends on SND_PCI
select SND_HDA
select SND_INTEL_DSP_CONFIG
help
Say Y here to include support for Intel "High Definition
Audio" (Azalia) and its compatible devices.
This option enables the HD-audio controller. Don't forget
to choose the appropriate codec options below.
To compile this driver as a module, choose M here: the module
will be called snd-hda-intel.
config SND_HDA_TEGRA
tristate "NVIDIA Tegra HD Audio"
depends on ARCH_TEGRA
select SND_HDA
select SND_HDA_ALIGNED_MMIO
help
Say Y here to support the HDA controller present in NVIDIA
Tegra SoCs
This options enables support for the HD Audio controller
present in some NVIDIA Tegra SoCs, used to communicate audio
to the HDMI output.
To compile this driver as a module, choose M here: the module
will be called snd-hda-tegra.
if SND_HDA
config SND_HDA_HWDEP
bool "Build hwdep interface for HD-audio driver"
select SND_HWDEP
help
Say Y here to build a hwdep interface for HD-audio driver.
This interface can be used for out-of-band communication
with codecs for debugging purposes.
config SND_HDA_RECONFIG
bool "Allow dynamic codec reconfiguration"
help
Say Y here to enable the HD-audio codec re-configuration feature.
It allows user to clear the whole codec configuration, change the
codec setup, add extra verbs, and re-configure the codec dynamically.
Note that this item alone doesn't provide the sysfs interface, but
enables the feature just for the patch loader below.
If you need the traditional sysfs entries for the manual interaction,
turn on CONFIG_SND_HDA_HWDEP as well.
config SND_HDA_INPUT_BEEP
bool "Support digital beep via input layer"
depends on INPUT=y || INPUT=SND_HDA
help
Say Y here to build a digital beep interface for HD-audio
driver. This interface is used to generate digital beeps.
config SND_HDA_INPUT_BEEP_MODE
int "Digital beep registration mode (0=off, 1=on)"
depends on SND_HDA_INPUT_BEEP=y
default "1"
range 0 1
help
Set 0 to disable the digital beep interface for HD-audio by default.
Set 1 to always enable the digital beep interface for HD-audio by
default.
config SND_HDA_PATCH_LOADER
bool "Support initialization patch loading for HD-audio"
select FW_LOADER
select SND_HDA_RECONFIG
help
Say Y here to allow the HD-audio driver to load a pseudo
firmware file ("patch") for overriding the BIOS setup at
start up. The "patch" file can be specified via patch module
option, such as patch=hda-init.
config SND_HDA_SCODEC_CS35L41
tristate
config SND_HDA_SCODEC_CS35L41_I2C
tristate "Build CS35L41 HD-audio side codec support for I2C Bus"
depends on I2C
depends on ACPI
depends on SND_SOC
select SND_HDA_GENERIC
select SND_SOC_CS35L41_LIB
select SND_HDA_SCODEC_CS35L41
help
Say Y or M here to include CS35L41 I2C HD-audio side codec support
in snd-hda-intel driver, such as ALC287.
comment "Set to Y if you want auto-loading the side codec driver"
depends on SND_HDA=y && SND_HDA_SCODEC_CS35L41_I2C=m
config SND_HDA_SCODEC_CS35L41_SPI
tristate "Build CS35L41 HD-audio codec support for SPI Bus"
depends on SPI_MASTER
depends on ACPI
depends on SND_SOC
select SND_HDA_GENERIC
select SND_SOC_CS35L41_LIB
select SND_HDA_SCODEC_CS35L41
help
Say Y or M here to include CS35L41 SPI HD-audio side codec support
in snd-hda-intel driver, such as ALC287.
comment "Set to Y if you want auto-loading the side codec driver"
depends on SND_HDA=y && SND_HDA_SCODEC_CS35L41_SPI=m
config SND_HDA_CODEC_REALTEK
tristate "Build Realtek HD-audio codec support"
select SND_HDA_GENERIC
select SND_HDA_GENERIC_LEDS
help
Say Y or M here to include Realtek HD-audio codec support in
snd-hda-intel driver, such as ALC880.
comment "Set to Y if you want auto-loading the codec driver"
depends on SND_HDA=y && SND_HDA_CODEC_REALTEK=m
config SND_HDA_CODEC_ANALOG
tristate "Build Analog Devices HD-audio codec support"
select SND_HDA_GENERIC
help
Say Y or M here to include Analog Devices HD-audio codec support in
snd-hda-intel driver, such as AD1986A.
comment "Set to Y if you want auto-loading the codec driver"
depends on SND_HDA=y && SND_HDA_CODEC_ANALOG=m
config SND_HDA_CODEC_SIGMATEL
tristate "Build IDT/Sigmatel HD-audio codec support"
select SND_HDA_GENERIC
select SND_HDA_GENERIC_LEDS
help
Say Y or M here to include IDT (Sigmatel) HD-audio codec support in
snd-hda-intel driver, such as STAC9200.
comment "Set to Y if you want auto-loading the codec driver"
depends on SND_HDA=y && SND_HDA_CODEC_SIGMATEL=m
config SND_HDA_CODEC_VIA
tristate "Build VIA HD-audio codec support"
select SND_HDA_GENERIC
help
Say Y or M here to include VIA HD-audio codec support in
snd-hda-intel driver, such as VT1708.
comment "Set to Y if you want auto-loading the codec driver"
depends on SND_HDA=y && SND_HDA_CODEC_VIA=m
config SND_HDA_CODEC_HDMI
tristate "Build HDMI/DisplayPort HD-audio codec support"
select SND_DYNAMIC_MINORS
help
Say Y or M here to include HDMI and DisplayPort HD-audio codec
support in snd-hda-intel driver. This includes all AMD/ATI,
Intel and Nvidia HDMI/DisplayPort codecs.
Note that this option mandatorily enables CONFIG_SND_DYNAMIC_MINORS
to assure the multiple streams for DP-MST support.
comment "Set to Y if you want auto-loading the codec driver"
depends on SND_HDA=y && SND_HDA_CODEC_HDMI=m
config SND_HDA_CODEC_CIRRUS
tristate "Build Cirrus Logic codec support"
select SND_HDA_GENERIC
help
Say Y or M here to include Cirrus Logic codec support in
snd-hda-intel driver, such as CS4206.
comment "Set to Y if you want auto-loading the codec driver"
depends on SND_HDA=y && SND_HDA_CODEC_CIRRUS=m
config SND_HDA_CODEC_CS8409
tristate "Build Cirrus Logic HDA bridge support"
select SND_HDA_GENERIC
help
Say Y or M here to include Cirrus Logic HDA bridge support in
snd-hda-intel driver, such as CS8409.
comment "Set to Y if you want auto-loading the codec driver"
depends on SND_HDA=y && SND_HDA_CODEC_CS8409=m
config SND_HDA_CODEC_CONEXANT
tristate "Build Conexant HD-audio codec support"
select SND_HDA_GENERIC
select SND_HDA_GENERIC_LEDS
help
Say Y or M here to include Conexant HD-audio codec support in
snd-hda-intel driver, such as CX20549.
comment "Set to Y if you want auto-loading the codec driver"
depends on SND_HDA=y && SND_HDA_CODEC_CONEXANT=m
config SND_HDA_CODEC_CA0110
tristate "Build Creative CA0110-IBG codec support"
select SND_HDA_GENERIC
help
Say Y or M here to include Creative CA0110-IBG codec support in
snd-hda-intel driver, found on some Creative X-Fi cards.
comment "Set to Y if you want auto-loading the codec driver"
depends on SND_HDA=y && SND_HDA_CODEC_CA0110=m
config SND_HDA_CODEC_CA0132
tristate "Build Creative CA0132 codec support"
help
Say Y or M here to include Creative CA0132 codec support in
snd-hda-intel driver.
comment "Set to Y if you want auto-loading the codec driver"
depends on SND_HDA=y && SND_HDA_CODEC_CA0132=m
config SND_HDA_CODEC_CA0132_DSP
bool "Support new DSP code for CA0132 codec"
depends on SND_HDA_CODEC_CA0132
default y
select SND_HDA_DSP_LOADER
select FW_LOADER
help
Say Y here to enable the DSP for Creative CA0132 for extended
features like equalizer or echo cancellation.
Note that this option requires the external firmware file
(ctefx.bin).
config SND_HDA_CODEC_CMEDIA
tristate "Build C-Media HD-audio codec support"
select SND_HDA_GENERIC
help
Say Y or M here to include C-Media HD-audio codec support in
snd-hda-intel driver, such as CMI9880.
comment "Set to Y if you want auto-loading the codec driver"
depends on SND_HDA=y && SND_HDA_CODEC_CMEDIA=m
config SND_HDA_CODEC_SI3054
tristate "Build Silicon Labs 3054 HD-modem codec support"
help
Say Y or M here to include Silicon Labs 3054 HD-modem codec
(and compatibles) support in snd-hda-intel driver.
comment "Set to Y if you want auto-loading the codec driver"
depends on SND_HDA=y && SND_HDA_CODEC_SI3054=m
config SND_HDA_GENERIC
tristate "Enable generic HD-audio codec parser"
select SND_CTL_LED if SND_HDA_GENERIC_LEDS
select LEDS_CLASS if SND_HDA_GENERIC_LEDS
help
Say Y or M here to enable the generic HD-audio codec parser
in snd-hda-intel driver.
comment "Set to Y if you want auto-loading the codec driver"
depends on SND_HDA=y && SND_HDA_GENERIC=m
config SND_HDA_POWER_SAVE_DEFAULT
int "Default time-out for HD-audio power-save mode"
depends on PM
default 0
help
The default time-out value in seconds for HD-audio automatic
power-save mode. 0 means to disable the power-save mode.
config SND_HDA_INTEL_HDMI_SILENT_STREAM
bool "Enable Silent Stream always for HDMI"
depends on SND_HDA_INTEL
help
Say Y to enable HD-Audio Keep Alive (KAE) aka Silent Stream
for HDMI on hardware that supports the feature.
When enabled, the HDMI/DisplayPort codec will continue to provide
a continuous clock and a valid but silent data stream to
any connected external receiver. This allows to avoid gaps
at start of playback. Many receivers require multiple seconds
to start playing audio after the clock has been stopped.
This feature can impact power consumption as resources
are kept reserved both at transmitter and receiver.
endif
endmenu