| /* |
| * Copyright (c) 2004, 2005 Topspin Communications. All rights reserved. |
| * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. |
| * Copyright (c) 2005, 2006, 2007, 2008 Mellanox Technologies. All rights reserved. |
| * Copyright (c) 2006, 2007 Cisco Systems, Inc. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the |
| * OpenIB.org BSD license below: |
| * |
| * Redistribution and use in source and binary forms, with or |
| * without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * - Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * |
| * - Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/pci.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/slab.h> |
| #include <linux/io-mapping.h> |
| #include <linux/delay.h> |
| |
| #include <linux/mlx4/device.h> |
| #include <linux/mlx4/doorbell.h> |
| |
| #include "mlx4.h" |
| #include "fw.h" |
| #include "icm.h" |
| |
| MODULE_AUTHOR("Roland Dreier"); |
| MODULE_DESCRIPTION("Mellanox ConnectX HCA low-level driver"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_VERSION(DRV_VERSION); |
| |
| struct workqueue_struct *mlx4_wq; |
| |
| #ifdef CONFIG_MLX4_DEBUG |
| |
| int mlx4_debug_level = 0; |
| module_param_named(debug_level, mlx4_debug_level, int, 0644); |
| MODULE_PARM_DESC(debug_level, "Enable debug tracing if > 0"); |
| |
| #endif /* CONFIG_MLX4_DEBUG */ |
| |
| #ifdef CONFIG_PCI_MSI |
| |
| static int msi_x = 1; |
| module_param(msi_x, int, 0444); |
| MODULE_PARM_DESC(msi_x, "attempt to use MSI-X if nonzero"); |
| |
| #else /* CONFIG_PCI_MSI */ |
| |
| #define msi_x (0) |
| |
| #endif /* CONFIG_PCI_MSI */ |
| |
| static int num_vfs; |
| module_param(num_vfs, int, 0444); |
| MODULE_PARM_DESC(num_vfs, "enable #num_vfs functions if num_vfs > 0"); |
| |
| static int probe_vf; |
| module_param(probe_vf, int, 0644); |
| MODULE_PARM_DESC(probe_vf, "number of vfs to probe by pf driver (num_vfs > 0)"); |
| |
| int mlx4_log_num_mgm_entry_size = 10; |
| module_param_named(log_num_mgm_entry_size, |
| mlx4_log_num_mgm_entry_size, int, 0444); |
| MODULE_PARM_DESC(log_num_mgm_entry_size, "log mgm size, that defines the num" |
| " of qp per mcg, for example:" |
| " 10 gives 248.range: 9<=" |
| " log_num_mgm_entry_size <= 12"); |
| |
| #define MLX4_VF (1 << 0) |
| |
| #define HCA_GLOBAL_CAP_MASK 0 |
| #define PF_CONTEXT_BEHAVIOUR_MASK 0 |
| |
| static char mlx4_version[] __devinitdata = |
| DRV_NAME ": Mellanox ConnectX core driver v" |
| DRV_VERSION " (" DRV_RELDATE ")\n"; |
| |
| static struct mlx4_profile default_profile = { |
| .num_qp = 1 << 18, |
| .num_srq = 1 << 16, |
| .rdmarc_per_qp = 1 << 4, |
| .num_cq = 1 << 16, |
| .num_mcg = 1 << 13, |
| .num_mpt = 1 << 19, |
| .num_mtt = 1 << 20, |
| }; |
| |
| static int log_num_mac = 7; |
| module_param_named(log_num_mac, log_num_mac, int, 0444); |
| MODULE_PARM_DESC(log_num_mac, "Log2 max number of MACs per ETH port (1-7)"); |
| |
| static int log_num_vlan; |
| module_param_named(log_num_vlan, log_num_vlan, int, 0444); |
| MODULE_PARM_DESC(log_num_vlan, "Log2 max number of VLANs per ETH port (0-7)"); |
| /* Log2 max number of VLANs per ETH port (0-7) */ |
| #define MLX4_LOG_NUM_VLANS 7 |
| |
| static int use_prio; |
| module_param_named(use_prio, use_prio, bool, 0444); |
| MODULE_PARM_DESC(use_prio, "Enable steering by VLAN priority on ETH ports " |
| "(0/1, default 0)"); |
| |
| int log_mtts_per_seg = ilog2(MLX4_MTT_ENTRY_PER_SEG); |
| module_param_named(log_mtts_per_seg, log_mtts_per_seg, int, 0444); |
| MODULE_PARM_DESC(log_mtts_per_seg, "Log2 number of MTT entries per segment (1-7)"); |
| |
| static int port_type_array[2] = {MLX4_PORT_TYPE_NONE, MLX4_PORT_TYPE_NONE}; |
| static int arr_argc = 2; |
| module_param_array(port_type_array, int, &arr_argc, 0444); |
| MODULE_PARM_DESC(port_type_array, "Array of port types: HW_DEFAULT (0) is default " |
| "1 for IB, 2 for Ethernet"); |
| |
| struct mlx4_port_config { |
| struct list_head list; |
| enum mlx4_port_type port_type[MLX4_MAX_PORTS + 1]; |
| struct pci_dev *pdev; |
| }; |
| |
| static inline int mlx4_master_get_num_eqs(struct mlx4_dev *dev) |
| { |
| return dev->caps.reserved_eqs + |
| MLX4_MFUNC_EQ_NUM * (dev->num_slaves + 1); |
| } |
| |
| int mlx4_check_port_params(struct mlx4_dev *dev, |
| enum mlx4_port_type *port_type) |
| { |
| int i; |
| |
| for (i = 0; i < dev->caps.num_ports - 1; i++) { |
| if (port_type[i] != port_type[i + 1]) { |
| if (!(dev->caps.flags & MLX4_DEV_CAP_FLAG_DPDP)) { |
| mlx4_err(dev, "Only same port types supported " |
| "on this HCA, aborting.\n"); |
| return -EINVAL; |
| } |
| if (port_type[i] == MLX4_PORT_TYPE_ETH && |
| port_type[i + 1] == MLX4_PORT_TYPE_IB) |
| return -EINVAL; |
| } |
| } |
| |
| for (i = 0; i < dev->caps.num_ports; i++) { |
| if (!(port_type[i] & dev->caps.supported_type[i+1])) { |
| mlx4_err(dev, "Requested port type for port %d is not " |
| "supported on this HCA\n", i + 1); |
| return -EINVAL; |
| } |
| } |
| return 0; |
| } |
| |
| static void mlx4_set_port_mask(struct mlx4_dev *dev) |
| { |
| int i; |
| |
| for (i = 1; i <= dev->caps.num_ports; ++i) |
| dev->caps.port_mask[i] = dev->caps.port_type[i]; |
| } |
| |
| static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) |
| { |
| int err; |
| int i; |
| |
| err = mlx4_QUERY_DEV_CAP(dev, dev_cap); |
| if (err) { |
| mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n"); |
| return err; |
| } |
| |
| if (dev_cap->min_page_sz > PAGE_SIZE) { |
| mlx4_err(dev, "HCA minimum page size of %d bigger than " |
| "kernel PAGE_SIZE of %ld, aborting.\n", |
| dev_cap->min_page_sz, PAGE_SIZE); |
| return -ENODEV; |
| } |
| if (dev_cap->num_ports > MLX4_MAX_PORTS) { |
| mlx4_err(dev, "HCA has %d ports, but we only support %d, " |
| "aborting.\n", |
| dev_cap->num_ports, MLX4_MAX_PORTS); |
| return -ENODEV; |
| } |
| |
| if (dev_cap->uar_size > pci_resource_len(dev->pdev, 2)) { |
| mlx4_err(dev, "HCA reported UAR size of 0x%x bigger than " |
| "PCI resource 2 size of 0x%llx, aborting.\n", |
| dev_cap->uar_size, |
| (unsigned long long) pci_resource_len(dev->pdev, 2)); |
| return -ENODEV; |
| } |
| |
| dev->caps.num_ports = dev_cap->num_ports; |
| for (i = 1; i <= dev->caps.num_ports; ++i) { |
| dev->caps.vl_cap[i] = dev_cap->max_vl[i]; |
| dev->caps.ib_mtu_cap[i] = dev_cap->ib_mtu[i]; |
| dev->caps.gid_table_len[i] = dev_cap->max_gids[i]; |
| dev->caps.pkey_table_len[i] = dev_cap->max_pkeys[i]; |
| dev->caps.port_width_cap[i] = dev_cap->max_port_width[i]; |
| dev->caps.eth_mtu_cap[i] = dev_cap->eth_mtu[i]; |
| dev->caps.def_mac[i] = dev_cap->def_mac[i]; |
| dev->caps.supported_type[i] = dev_cap->supported_port_types[i]; |
| dev->caps.suggested_type[i] = dev_cap->suggested_type[i]; |
| dev->caps.default_sense[i] = dev_cap->default_sense[i]; |
| dev->caps.trans_type[i] = dev_cap->trans_type[i]; |
| dev->caps.vendor_oui[i] = dev_cap->vendor_oui[i]; |
| dev->caps.wavelength[i] = dev_cap->wavelength[i]; |
| dev->caps.trans_code[i] = dev_cap->trans_code[i]; |
| } |
| |
| dev->caps.uar_page_size = PAGE_SIZE; |
| dev->caps.num_uars = dev_cap->uar_size / PAGE_SIZE; |
| dev->caps.local_ca_ack_delay = dev_cap->local_ca_ack_delay; |
| dev->caps.bf_reg_size = dev_cap->bf_reg_size; |
| dev->caps.bf_regs_per_page = dev_cap->bf_regs_per_page; |
| dev->caps.max_sq_sg = dev_cap->max_sq_sg; |
| dev->caps.max_rq_sg = dev_cap->max_rq_sg; |
| dev->caps.max_wqes = dev_cap->max_qp_sz; |
| dev->caps.max_qp_init_rdma = dev_cap->max_requester_per_qp; |
| dev->caps.max_srq_wqes = dev_cap->max_srq_sz; |
| dev->caps.max_srq_sge = dev_cap->max_rq_sg - 1; |
| dev->caps.reserved_srqs = dev_cap->reserved_srqs; |
| dev->caps.max_sq_desc_sz = dev_cap->max_sq_desc_sz; |
| dev->caps.max_rq_desc_sz = dev_cap->max_rq_desc_sz; |
| dev->caps.num_qp_per_mgm = mlx4_get_qp_per_mgm(dev); |
| /* |
| * Subtract 1 from the limit because we need to allocate a |
| * spare CQE so the HCA HW can tell the difference between an |
| * empty CQ and a full CQ. |
| */ |
| dev->caps.max_cqes = dev_cap->max_cq_sz - 1; |
| dev->caps.reserved_cqs = dev_cap->reserved_cqs; |
| dev->caps.reserved_eqs = dev_cap->reserved_eqs; |
| dev->caps.reserved_mtts = dev_cap->reserved_mtts; |
| dev->caps.reserved_mrws = dev_cap->reserved_mrws; |
| |
| /* The first 128 UARs are used for EQ doorbells */ |
| dev->caps.reserved_uars = max_t(int, 128, dev_cap->reserved_uars); |
| dev->caps.reserved_pds = dev_cap->reserved_pds; |
| dev->caps.reserved_xrcds = (dev->caps.flags & MLX4_DEV_CAP_FLAG_XRC) ? |
| dev_cap->reserved_xrcds : 0; |
| dev->caps.max_xrcds = (dev->caps.flags & MLX4_DEV_CAP_FLAG_XRC) ? |
| dev_cap->max_xrcds : 0; |
| dev->caps.mtt_entry_sz = dev_cap->mtt_entry_sz; |
| |
| dev->caps.max_msg_sz = dev_cap->max_msg_sz; |
| dev->caps.page_size_cap = ~(u32) (dev_cap->min_page_sz - 1); |
| dev->caps.flags = dev_cap->flags; |
| dev->caps.bmme_flags = dev_cap->bmme_flags; |
| dev->caps.reserved_lkey = dev_cap->reserved_lkey; |
| dev->caps.stat_rate_support = dev_cap->stat_rate_support; |
| dev->caps.max_gso_sz = dev_cap->max_gso_sz; |
| |
| /* Sense port always allowed on supported devices for ConnectX1 and 2 */ |
| if (dev->pdev->device != 0x1003) |
| dev->caps.flags |= MLX4_DEV_CAP_FLAG_SENSE_SUPPORT; |
| |
| dev->caps.log_num_macs = log_num_mac; |
| dev->caps.log_num_vlans = MLX4_LOG_NUM_VLANS; |
| dev->caps.log_num_prios = use_prio ? 3 : 0; |
| |
| for (i = 1; i <= dev->caps.num_ports; ++i) { |
| dev->caps.port_type[i] = MLX4_PORT_TYPE_NONE; |
| if (dev->caps.supported_type[i]) { |
| /* if only ETH is supported - assign ETH */ |
| if (dev->caps.supported_type[i] == MLX4_PORT_TYPE_ETH) |
| dev->caps.port_type[i] = MLX4_PORT_TYPE_ETH; |
| /* if only IB is supported, |
| * assign IB only if SRIOV is off*/ |
| else if (dev->caps.supported_type[i] == |
| MLX4_PORT_TYPE_IB) { |
| if (dev->flags & MLX4_FLAG_SRIOV) |
| dev->caps.port_type[i] = |
| MLX4_PORT_TYPE_NONE; |
| else |
| dev->caps.port_type[i] = |
| MLX4_PORT_TYPE_IB; |
| /* if IB and ETH are supported, |
| * first of all check if SRIOV is on */ |
| } else if (dev->flags & MLX4_FLAG_SRIOV) |
| dev->caps.port_type[i] = MLX4_PORT_TYPE_ETH; |
| else { |
| /* In non-SRIOV mode, we set the port type |
| * according to user selection of port type, |
| * if usere selected none, take the FW hint */ |
| if (port_type_array[i-1] == MLX4_PORT_TYPE_NONE) |
| dev->caps.port_type[i] = dev->caps.suggested_type[i] ? |
| MLX4_PORT_TYPE_ETH : MLX4_PORT_TYPE_IB; |
| else |
| dev->caps.port_type[i] = port_type_array[i-1]; |
| } |
| } |
| /* |
| * Link sensing is allowed on the port if 3 conditions are true: |
| * 1. Both protocols are supported on the port. |
| * 2. Different types are supported on the port |
| * 3. FW declared that it supports link sensing |
| */ |
| mlx4_priv(dev)->sense.sense_allowed[i] = |
| ((dev->caps.supported_type[i] == MLX4_PORT_TYPE_AUTO) && |
| (dev->caps.flags & MLX4_DEV_CAP_FLAG_DPDP) && |
| (dev->caps.flags & MLX4_DEV_CAP_FLAG_SENSE_SUPPORT)); |
| |
| /* |
| * If "default_sense" bit is set, we move the port to "AUTO" mode |
| * and perform sense_port FW command to try and set the correct |
| * port type from beginning |
| */ |
| if (mlx4_priv(dev)->sense.sense_allowed && dev->caps.default_sense[i]) { |
| enum mlx4_port_type sensed_port = MLX4_PORT_TYPE_NONE; |
| dev->caps.possible_type[i] = MLX4_PORT_TYPE_AUTO; |
| mlx4_SENSE_PORT(dev, i, &sensed_port); |
| if (sensed_port != MLX4_PORT_TYPE_NONE) |
| dev->caps.port_type[i] = sensed_port; |
| } else { |
| dev->caps.possible_type[i] = dev->caps.port_type[i]; |
| } |
| |
| if (dev->caps.log_num_macs > dev_cap->log_max_macs[i]) { |
| dev->caps.log_num_macs = dev_cap->log_max_macs[i]; |
| mlx4_warn(dev, "Requested number of MACs is too much " |
| "for port %d, reducing to %d.\n", |
| i, 1 << dev->caps.log_num_macs); |
| } |
| if (dev->caps.log_num_vlans > dev_cap->log_max_vlans[i]) { |
| dev->caps.log_num_vlans = dev_cap->log_max_vlans[i]; |
| mlx4_warn(dev, "Requested number of VLANs is too much " |
| "for port %d, reducing to %d.\n", |
| i, 1 << dev->caps.log_num_vlans); |
| } |
| } |
| |
| dev->caps.max_counters = 1 << ilog2(dev_cap->max_counters); |
| |
| dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW] = dev_cap->reserved_qps; |
| dev->caps.reserved_qps_cnt[MLX4_QP_REGION_ETH_ADDR] = |
| dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_ADDR] = |
| (1 << dev->caps.log_num_macs) * |
| (1 << dev->caps.log_num_vlans) * |
| (1 << dev->caps.log_num_prios) * |
| dev->caps.num_ports; |
| dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_EXCH] = MLX4_NUM_FEXCH; |
| |
| dev->caps.reserved_qps = dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW] + |
| dev->caps.reserved_qps_cnt[MLX4_QP_REGION_ETH_ADDR] + |
| dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_ADDR] + |
| dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_EXCH]; |
| |
| return 0; |
| } |
| /*The function checks if there are live vf, return the num of them*/ |
| static int mlx4_how_many_lives_vf(struct mlx4_dev *dev) |
| { |
| struct mlx4_priv *priv = mlx4_priv(dev); |
| struct mlx4_slave_state *s_state; |
| int i; |
| int ret = 0; |
| |
| for (i = 1/*the ppf is 0*/; i < dev->num_slaves; ++i) { |
| s_state = &priv->mfunc.master.slave_state[i]; |
| if (s_state->active && s_state->last_cmd != |
| MLX4_COMM_CMD_RESET) { |
| mlx4_warn(dev, "%s: slave: %d is still active\n", |
| __func__, i); |
| ret++; |
| } |
| } |
| return ret; |
| } |
| |
| static int mlx4_is_slave_active(struct mlx4_dev *dev, int slave) |
| { |
| struct mlx4_priv *priv = mlx4_priv(dev); |
| struct mlx4_slave_state *s_slave; |
| |
| if (!mlx4_is_master(dev)) |
| return 0; |
| |
| s_slave = &priv->mfunc.master.slave_state[slave]; |
| return !!s_slave->active; |
| } |
| EXPORT_SYMBOL(mlx4_is_slave_active); |
| |
| static int mlx4_slave_cap(struct mlx4_dev *dev) |
| { |
| int err; |
| u32 page_size; |
| struct mlx4_dev_cap dev_cap; |
| struct mlx4_func_cap func_cap; |
| struct mlx4_init_hca_param hca_param; |
| int i; |
| |
| memset(&hca_param, 0, sizeof(hca_param)); |
| err = mlx4_QUERY_HCA(dev, &hca_param); |
| if (err) { |
| mlx4_err(dev, "QUERY_HCA command failed, aborting.\n"); |
| return err; |
| } |
| |
| /*fail if the hca has an unknown capability */ |
| if ((hca_param.global_caps | HCA_GLOBAL_CAP_MASK) != |
| HCA_GLOBAL_CAP_MASK) { |
| mlx4_err(dev, "Unknown hca global capabilities\n"); |
| return -ENOSYS; |
| } |
| |
| mlx4_log_num_mgm_entry_size = hca_param.log_mc_entry_sz; |
| |
| memset(&dev_cap, 0, sizeof(dev_cap)); |
| err = mlx4_dev_cap(dev, &dev_cap); |
| if (err) { |
| mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n"); |
| return err; |
| } |
| |
| page_size = ~dev->caps.page_size_cap + 1; |
| mlx4_warn(dev, "HCA minimum page size:%d\n", page_size); |
| if (page_size > PAGE_SIZE) { |
| mlx4_err(dev, "HCA minimum page size of %d bigger than " |
| "kernel PAGE_SIZE of %ld, aborting.\n", |
| page_size, PAGE_SIZE); |
| return -ENODEV; |
| } |
| |
| /* slave gets uar page size from QUERY_HCA fw command */ |
| dev->caps.uar_page_size = 1 << (hca_param.uar_page_sz + 12); |
| |
| /* TODO: relax this assumption */ |
| if (dev->caps.uar_page_size != PAGE_SIZE) { |
| mlx4_err(dev, "UAR size:%d != kernel PAGE_SIZE of %ld\n", |
| dev->caps.uar_page_size, PAGE_SIZE); |
| return -ENODEV; |
| } |
| |
| memset(&func_cap, 0, sizeof(func_cap)); |
| err = mlx4_QUERY_FUNC_CAP(dev, &func_cap); |
| if (err) { |
| mlx4_err(dev, "QUERY_FUNC_CAP command failed, aborting.\n"); |
| return err; |
| } |
| |
| if ((func_cap.pf_context_behaviour | PF_CONTEXT_BEHAVIOUR_MASK) != |
| PF_CONTEXT_BEHAVIOUR_MASK) { |
| mlx4_err(dev, "Unknown pf context behaviour\n"); |
| return -ENOSYS; |
| } |
| |
| dev->caps.function = func_cap.function; |
| dev->caps.num_ports = func_cap.num_ports; |
| dev->caps.num_qps = func_cap.qp_quota; |
| dev->caps.num_srqs = func_cap.srq_quota; |
| dev->caps.num_cqs = func_cap.cq_quota; |
| dev->caps.num_eqs = func_cap.max_eq; |
| dev->caps.reserved_eqs = func_cap.reserved_eq; |
| dev->caps.num_mpts = func_cap.mpt_quota; |
| dev->caps.num_mtts = func_cap.mtt_quota; |
| dev->caps.num_pds = MLX4_NUM_PDS; |
| dev->caps.num_mgms = 0; |
| dev->caps.num_amgms = 0; |
| |
| for (i = 1; i <= dev->caps.num_ports; ++i) |
| dev->caps.port_mask[i] = dev->caps.port_type[i]; |
| |
| if (dev->caps.num_ports > MLX4_MAX_PORTS) { |
| mlx4_err(dev, "HCA has %d ports, but we only support %d, " |
| "aborting.\n", dev->caps.num_ports, MLX4_MAX_PORTS); |
| return -ENODEV; |
| } |
| |
| if (dev->caps.uar_page_size * (dev->caps.num_uars - |
| dev->caps.reserved_uars) > |
| pci_resource_len(dev->pdev, 2)) { |
| mlx4_err(dev, "HCA reported UAR region size of 0x%x bigger than " |
| "PCI resource 2 size of 0x%llx, aborting.\n", |
| dev->caps.uar_page_size * dev->caps.num_uars, |
| (unsigned long long) pci_resource_len(dev->pdev, 2)); |
| return -ENODEV; |
| } |
| |
| #if 0 |
| mlx4_warn(dev, "sqp_demux:%d\n", dev->caps.sqp_demux); |
| mlx4_warn(dev, "num_uars:%d reserved_uars:%d uar region:0x%x bar2:0x%llx\n", |
| dev->caps.num_uars, dev->caps.reserved_uars, |
| dev->caps.uar_page_size * dev->caps.num_uars, |
| pci_resource_len(dev->pdev, 2)); |
| mlx4_warn(dev, "num_eqs:%d reserved_eqs:%d\n", dev->caps.num_eqs, |
| dev->caps.reserved_eqs); |
| mlx4_warn(dev, "num_pds:%d reserved_pds:%d slave_pd_shift:%d pd_base:%d\n", |
| dev->caps.num_pds, dev->caps.reserved_pds, |
| dev->caps.slave_pd_shift, dev->caps.pd_base); |
| #endif |
| return 0; |
| } |
| |
| /* |
| * Change the port configuration of the device. |
| * Every user of this function must hold the port mutex. |
| */ |
| int mlx4_change_port_types(struct mlx4_dev *dev, |
| enum mlx4_port_type *port_types) |
| { |
| int err = 0; |
| int change = 0; |
| int port; |
| |
| for (port = 0; port < dev->caps.num_ports; port++) { |
| /* Change the port type only if the new type is different |
| * from the current, and not set to Auto */ |
| if (port_types[port] != dev->caps.port_type[port + 1]) { |
| change = 1; |
| dev->caps.port_type[port + 1] = port_types[port]; |
| } |
| } |
| if (change) { |
| mlx4_unregister_device(dev); |
| for (port = 1; port <= dev->caps.num_ports; port++) { |
| mlx4_CLOSE_PORT(dev, port); |
| err = mlx4_SET_PORT(dev, port); |
| if (err) { |
| mlx4_err(dev, "Failed to set port %d, " |
| "aborting\n", port); |
| goto out; |
| } |
| } |
| mlx4_set_port_mask(dev); |
| err = mlx4_register_device(dev); |
| } |
| |
| out: |
| return err; |
| } |
| |
| static ssize_t show_port_type(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info, |
| port_attr); |
| struct mlx4_dev *mdev = info->dev; |
| char type[8]; |
| |
| sprintf(type, "%s", |
| (mdev->caps.port_type[info->port] == MLX4_PORT_TYPE_IB) ? |
| "ib" : "eth"); |
| if (mdev->caps.possible_type[info->port] == MLX4_PORT_TYPE_AUTO) |
| sprintf(buf, "auto (%s)\n", type); |
| else |
| sprintf(buf, "%s\n", type); |
| |
| return strlen(buf); |
| } |
| |
| static ssize_t set_port_type(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info, |
| port_attr); |
| struct mlx4_dev *mdev = info->dev; |
| struct mlx4_priv *priv = mlx4_priv(mdev); |
| enum mlx4_port_type types[MLX4_MAX_PORTS]; |
| enum mlx4_port_type new_types[MLX4_MAX_PORTS]; |
| int i; |
| int err = 0; |
| |
| if (!strcmp(buf, "ib\n")) |
| info->tmp_type = MLX4_PORT_TYPE_IB; |
| else if (!strcmp(buf, "eth\n")) |
| info->tmp_type = MLX4_PORT_TYPE_ETH; |
| else if (!strcmp(buf, "auto\n")) |
| info->tmp_type = MLX4_PORT_TYPE_AUTO; |
| else { |
| mlx4_err(mdev, "%s is not supported port type\n", buf); |
| return -EINVAL; |
| } |
| |
| mlx4_stop_sense(mdev); |
| mutex_lock(&priv->port_mutex); |
| /* Possible type is always the one that was delivered */ |
| mdev->caps.possible_type[info->port] = info->tmp_type; |
| |
| for (i = 0; i < mdev->caps.num_ports; i++) { |
| types[i] = priv->port[i+1].tmp_type ? priv->port[i+1].tmp_type : |
| mdev->caps.possible_type[i+1]; |
| if (types[i] == MLX4_PORT_TYPE_AUTO) |
| types[i] = mdev->caps.port_type[i+1]; |
| } |
| |
| if (!(mdev->caps.flags & MLX4_DEV_CAP_FLAG_DPDP) && |
| !(mdev->caps.flags & MLX4_DEV_CAP_FLAG_SENSE_SUPPORT)) { |
| for (i = 1; i <= mdev->caps.num_ports; i++) { |
| if (mdev->caps.possible_type[i] == MLX4_PORT_TYPE_AUTO) { |
| mdev->caps.possible_type[i] = mdev->caps.port_type[i]; |
| err = -EINVAL; |
| } |
| } |
| } |
| if (err) { |
| mlx4_err(mdev, "Auto sensing is not supported on this HCA. " |
| "Set only 'eth' or 'ib' for both ports " |
| "(should be the same)\n"); |
| goto out; |
| } |
| |
| mlx4_do_sense_ports(mdev, new_types, types); |
| |
| err = mlx4_check_port_params(mdev, new_types); |
| if (err) |
| goto out; |
| |
| /* We are about to apply the changes after the configuration |
| * was verified, no need to remember the temporary types |
| * any more */ |
| for (i = 0; i < mdev->caps.num_ports; i++) |
| priv->port[i + 1].tmp_type = 0; |
| |
| err = mlx4_change_port_types(mdev, new_types); |
| |
| out: |
| mlx4_start_sense(mdev); |
| mutex_unlock(&priv->port_mutex); |
| return err ? err : count; |
| } |
| |
| static int mlx4_load_fw(struct mlx4_dev *dev) |
| { |
| struct mlx4_priv *priv = mlx4_priv(dev); |
| int err; |
| |
| priv->fw.fw_icm = mlx4_alloc_icm(dev, priv->fw.fw_pages, |
| GFP_HIGHUSER | __GFP_NOWARN, 0); |
| if (!priv->fw.fw_icm) { |
| mlx4_err(dev, "Couldn't allocate FW area, aborting.\n"); |
| return -ENOMEM; |
| } |
| |
| err = mlx4_MAP_FA(dev, priv->fw.fw_icm); |
| if (err) { |
| mlx4_err(dev, "MAP_FA command failed, aborting.\n"); |
| goto err_free; |
| } |
| |
| err = mlx4_RUN_FW(dev); |
| if (err) { |
| mlx4_err(dev, "RUN_FW command failed, aborting.\n"); |
| goto err_unmap_fa; |
| } |
| |
| return 0; |
| |
| err_unmap_fa: |
| mlx4_UNMAP_FA(dev); |
| |
| err_free: |
| mlx4_free_icm(dev, priv->fw.fw_icm, 0); |
| return err; |
| } |
| |
| static int mlx4_init_cmpt_table(struct mlx4_dev *dev, u64 cmpt_base, |
| int cmpt_entry_sz) |
| { |
| struct mlx4_priv *priv = mlx4_priv(dev); |
| int err; |
| int num_eqs; |
| |
| err = mlx4_init_icm_table(dev, &priv->qp_table.cmpt_table, |
| cmpt_base + |
| ((u64) (MLX4_CMPT_TYPE_QP * |
| cmpt_entry_sz) << MLX4_CMPT_SHIFT), |
| cmpt_entry_sz, dev->caps.num_qps, |
| dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], |
| 0, 0); |
| if (err) |
| goto err; |
| |
| err = mlx4_init_icm_table(dev, &priv->srq_table.cmpt_table, |
| cmpt_base + |
| ((u64) (MLX4_CMPT_TYPE_SRQ * |
| cmpt_entry_sz) << MLX4_CMPT_SHIFT), |
| cmpt_entry_sz, dev->caps.num_srqs, |
| dev->caps.reserved_srqs, 0, 0); |
| if (err) |
| goto err_qp; |
| |
| err = mlx4_init_icm_table(dev, &priv->cq_table.cmpt_table, |
| cmpt_base + |
| ((u64) (MLX4_CMPT_TYPE_CQ * |
| cmpt_entry_sz) << MLX4_CMPT_SHIFT), |
| cmpt_entry_sz, dev->caps.num_cqs, |
| dev->caps.reserved_cqs, 0, 0); |
| if (err) |
| goto err_srq; |
| |
| num_eqs = (mlx4_is_master(dev)) ? |
| roundup_pow_of_two(mlx4_master_get_num_eqs(dev)) : |
| dev->caps.num_eqs; |
| err = mlx4_init_icm_table(dev, &priv->eq_table.cmpt_table, |
| cmpt_base + |
| ((u64) (MLX4_CMPT_TYPE_EQ * |
| cmpt_entry_sz) << MLX4_CMPT_SHIFT), |
| cmpt_entry_sz, num_eqs, num_eqs, 0, 0); |
| if (err) |
| goto err_cq; |
| |
| return 0; |
| |
| err_cq: |
| mlx4_cleanup_icm_table(dev, &priv->cq_table.cmpt_table); |
| |
| err_srq: |
| mlx4_cleanup_icm_table(dev, &priv->srq_table.cmpt_table); |
| |
| err_qp: |
| mlx4_cleanup_icm_table(dev, &priv->qp_table.cmpt_table); |
| |
| err: |
| return err; |
| } |
| |
| static int mlx4_init_icm(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap, |
| struct mlx4_init_hca_param *init_hca, u64 icm_size) |
| { |
| struct mlx4_priv *priv = mlx4_priv(dev); |
| u64 aux_pages; |
| int num_eqs; |
| int err; |
| |
| err = mlx4_SET_ICM_SIZE(dev, icm_size, &aux_pages); |
| if (err) { |
| mlx4_err(dev, "SET_ICM_SIZE command failed, aborting.\n"); |
| return err; |
| } |
| |
| mlx4_dbg(dev, "%lld KB of HCA context requires %lld KB aux memory.\n", |
| (unsigned long long) icm_size >> 10, |
| (unsigned long long) aux_pages << 2); |
| |
| priv->fw.aux_icm = mlx4_alloc_icm(dev, aux_pages, |
| GFP_HIGHUSER | __GFP_NOWARN, 0); |
| if (!priv->fw.aux_icm) { |
| mlx4_err(dev, "Couldn't allocate aux memory, aborting.\n"); |
| return -ENOMEM; |
| } |
| |
| err = mlx4_MAP_ICM_AUX(dev, priv->fw.aux_icm); |
| if (err) { |
| mlx4_err(dev, "MAP_ICM_AUX command failed, aborting.\n"); |
| goto err_free_aux; |
| } |
| |
| err = mlx4_init_cmpt_table(dev, init_hca->cmpt_base, dev_cap->cmpt_entry_sz); |
| if (err) { |
| mlx4_err(dev, "Failed to map cMPT context memory, aborting.\n"); |
| goto err_unmap_aux; |
| } |
| |
| |
| num_eqs = (mlx4_is_master(dev)) ? |
| roundup_pow_of_two(mlx4_master_get_num_eqs(dev)) : |
| dev->caps.num_eqs; |
| err = mlx4_init_icm_table(dev, &priv->eq_table.table, |
| init_hca->eqc_base, dev_cap->eqc_entry_sz, |
| num_eqs, num_eqs, 0, 0); |
| if (err) { |
| mlx4_err(dev, "Failed to map EQ context memory, aborting.\n"); |
| goto err_unmap_cmpt; |
| } |
| |
| /* |
| * Reserved MTT entries must be aligned up to a cacheline |
| * boundary, since the FW will write to them, while the driver |
| * writes to all other MTT entries. (The variable |
| * dev->caps.mtt_entry_sz below is really the MTT segment |
| * size, not the raw entry size) |
| */ |
| dev->caps.reserved_mtts = |
| ALIGN(dev->caps.reserved_mtts * dev->caps.mtt_entry_sz, |
| dma_get_cache_alignment()) / dev->caps.mtt_entry_sz; |
| |
| err = mlx4_init_icm_table(dev, &priv->mr_table.mtt_table, |
| init_hca->mtt_base, |
| dev->caps.mtt_entry_sz, |
| dev->caps.num_mtts, |
| dev->caps.reserved_mtts, 1, 0); |
| if (err) { |
| mlx4_err(dev, "Failed to map MTT context memory, aborting.\n"); |
| goto err_unmap_eq; |
| } |
| |
| err = mlx4_init_icm_table(dev, &priv->mr_table.dmpt_table, |
| init_hca->dmpt_base, |
| dev_cap->dmpt_entry_sz, |
| dev->caps.num_mpts, |
| dev->caps.reserved_mrws, 1, 1); |
| if (err) { |
| mlx4_err(dev, "Failed to map dMPT context memory, aborting.\n"); |
| goto err_unmap_mtt; |
| } |
| |
| err = mlx4_init_icm_table(dev, &priv->qp_table.qp_table, |
| init_hca->qpc_base, |
| dev_cap->qpc_entry_sz, |
| dev->caps.num_qps, |
| dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], |
| 0, 0); |
| if (err) { |
| mlx4_err(dev, "Failed to map QP context memory, aborting.\n"); |
| goto err_unmap_dmpt; |
| } |
| |
| err = mlx4_init_icm_table(dev, &priv->qp_table.auxc_table, |
| init_hca->auxc_base, |
| dev_cap->aux_entry_sz, |
| dev->caps.num_qps, |
| dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], |
| 0, 0); |
| if (err) { |
| mlx4_err(dev, "Failed to map AUXC context memory, aborting.\n"); |
| goto err_unmap_qp; |
| } |
| |
| err = mlx4_init_icm_table(dev, &priv->qp_table.altc_table, |
| init_hca->altc_base, |
| dev_cap->altc_entry_sz, |
| dev->caps.num_qps, |
| dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], |
| 0, 0); |
| if (err) { |
| mlx4_err(dev, "Failed to map ALTC context memory, aborting.\n"); |
| goto err_unmap_auxc; |
| } |
| |
| err = mlx4_init_icm_table(dev, &priv->qp_table.rdmarc_table, |
| init_hca->rdmarc_base, |
| dev_cap->rdmarc_entry_sz << priv->qp_table.rdmarc_shift, |
| dev->caps.num_qps, |
| dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], |
| 0, 0); |
| if (err) { |
| mlx4_err(dev, "Failed to map RDMARC context memory, aborting\n"); |
| goto err_unmap_altc; |
| } |
| |
| err = mlx4_init_icm_table(dev, &priv->cq_table.table, |
| init_hca->cqc_base, |
| dev_cap->cqc_entry_sz, |
| dev->caps.num_cqs, |
| dev->caps.reserved_cqs, 0, 0); |
| if (err) { |
| mlx4_err(dev, "Failed to map CQ context memory, aborting.\n"); |
| goto err_unmap_rdmarc; |
| } |
| |
| err = mlx4_init_icm_table(dev, &priv->srq_table.table, |
| init_hca->srqc_base, |
| dev_cap->srq_entry_sz, |
| dev->caps.num_srqs, |
| dev->caps.reserved_srqs, 0, 0); |
| if (err) { |
| mlx4_err(dev, "Failed to map SRQ context memory, aborting.\n"); |
| goto err_unmap_cq; |
| } |
| |
| /* |
| * It's not strictly required, but for simplicity just map the |
| * whole multicast group table now. The table isn't very big |
| * and it's a lot easier than trying to track ref counts. |
| */ |
| err = mlx4_init_icm_table(dev, &priv->mcg_table.table, |
| init_hca->mc_base, |
| mlx4_get_mgm_entry_size(dev), |
| dev->caps.num_mgms + dev->caps.num_amgms, |
| dev->caps.num_mgms + dev->caps.num_amgms, |
| 0, 0); |
| if (err) { |
| mlx4_err(dev, "Failed to map MCG context memory, aborting.\n"); |
| goto err_unmap_srq; |
| } |
| |
| return 0; |
| |
| err_unmap_srq: |
| mlx4_cleanup_icm_table(dev, &priv->srq_table.table); |
| |
| err_unmap_cq: |
| mlx4_cleanup_icm_table(dev, &priv->cq_table.table); |
| |
| err_unmap_rdmarc: |
| mlx4_cleanup_icm_table(dev, &priv->qp_table.rdmarc_table); |
| |
| err_unmap_altc: |
| mlx4_cleanup_icm_table(dev, &priv->qp_table.altc_table); |
| |
| err_unmap_auxc: |
| mlx4_cleanup_icm_table(dev, &priv->qp_table.auxc_table); |
| |
| err_unmap_qp: |
| mlx4_cleanup_icm_table(dev, &priv->qp_table.qp_table); |
| |
| err_unmap_dmpt: |
| mlx4_cleanup_icm_table(dev, &priv->mr_table.dmpt_table); |
| |
| err_unmap_mtt: |
| mlx4_cleanup_icm_table(dev, &priv->mr_table.mtt_table); |
| |
| err_unmap_eq: |
| mlx4_cleanup_icm_table(dev, &priv->eq_table.table); |
| |
| err_unmap_cmpt: |
| mlx4_cleanup_icm_table(dev, &priv->eq_table.cmpt_table); |
| mlx4_cleanup_icm_table(dev, &priv->cq_table.cmpt_table); |
| mlx4_cleanup_icm_table(dev, &priv->srq_table.cmpt_table); |
| mlx4_cleanup_icm_table(dev, &priv->qp_table.cmpt_table); |
| |
| err_unmap_aux: |
| mlx4_UNMAP_ICM_AUX(dev); |
| |
| err_free_aux: |
| mlx4_free_icm(dev, priv->fw.aux_icm, 0); |
| |
| return err; |
| } |
| |
| static void mlx4_free_icms(struct mlx4_dev *dev) |
| { |
| struct mlx4_priv *priv = mlx4_priv(dev); |
| |
| mlx4_cleanup_icm_table(dev, &priv->mcg_table.table); |
| mlx4_cleanup_icm_table(dev, &priv->srq_table.table); |
| mlx4_cleanup_icm_table(dev, &priv->cq_table.table); |
| mlx4_cleanup_icm_table(dev, &priv->qp_table.rdmarc_table); |
| mlx4_cleanup_icm_table(dev, &priv->qp_table.altc_table); |
| mlx4_cleanup_icm_table(dev, &priv->qp_table.auxc_table); |
| mlx4_cleanup_icm_table(dev, &priv->qp_table.qp_table); |
| mlx4_cleanup_icm_table(dev, &priv->mr_table.dmpt_table); |
| mlx4_cleanup_icm_table(dev, &priv->mr_table.mtt_table); |
| mlx4_cleanup_icm_table(dev, &priv->eq_table.table); |
| mlx4_cleanup_icm_table(dev, &priv->eq_table.cmpt_table); |
| mlx4_cleanup_icm_table(dev, &priv->cq_table.cmpt_table); |
| mlx4_cleanup_icm_table(dev, &priv->srq_table.cmpt_table); |
| mlx4_cleanup_icm_table(dev, &priv->qp_table.cmpt_table); |
| |
| mlx4_UNMAP_ICM_AUX(dev); |
| mlx4_free_icm(dev, priv->fw.aux_icm, 0); |
| } |
| |
| static void mlx4_slave_exit(struct mlx4_dev *dev) |
| { |
| struct mlx4_priv *priv = mlx4_priv(dev); |
| |
| down(&priv->cmd.slave_sem); |
| if (mlx4_comm_cmd(dev, MLX4_COMM_CMD_RESET, 0, MLX4_COMM_TIME)) |
| mlx4_warn(dev, "Failed to close slave function.\n"); |
| up(&priv->cmd.slave_sem); |
| } |
| |
| static int map_bf_area(struct mlx4_dev *dev) |
| { |
| struct mlx4_priv *priv = mlx4_priv(dev); |
| resource_size_t bf_start; |
| resource_size_t bf_len; |
| int err = 0; |
| |
| bf_start = pci_resource_start(dev->pdev, 2) + |
| (dev->caps.num_uars << PAGE_SHIFT); |
| bf_len = pci_resource_len(dev->pdev, 2) - |
| (dev->caps.num_uars << PAGE_SHIFT); |
| priv->bf_mapping = io_mapping_create_wc(bf_start, bf_len); |
| if (!priv->bf_mapping) |
| err = -ENOMEM; |
| |
| return err; |
| } |
| |
| static void unmap_bf_area(struct mlx4_dev *dev) |
| { |
| if (mlx4_priv(dev)->bf_mapping) |
| io_mapping_free(mlx4_priv(dev)->bf_mapping); |
| } |
| |
| static void mlx4_close_hca(struct mlx4_dev *dev) |
| { |
| unmap_bf_area(dev); |
| if (mlx4_is_slave(dev)) |
| mlx4_slave_exit(dev); |
| else { |
| mlx4_CLOSE_HCA(dev, 0); |
| mlx4_free_icms(dev); |
| mlx4_UNMAP_FA(dev); |
| mlx4_free_icm(dev, mlx4_priv(dev)->fw.fw_icm, 0); |
| } |
| } |
| |
| static int mlx4_init_slave(struct mlx4_dev *dev) |
| { |
| struct mlx4_priv *priv = mlx4_priv(dev); |
| u64 dma = (u64) priv->mfunc.vhcr_dma; |
| int num_of_reset_retries = NUM_OF_RESET_RETRIES; |
| int ret_from_reset = 0; |
| u32 slave_read; |
| u32 cmd_channel_ver; |
| |
| down(&priv->cmd.slave_sem); |
| priv->cmd.max_cmds = 1; |
| mlx4_warn(dev, "Sending reset\n"); |
| ret_from_reset = mlx4_comm_cmd(dev, MLX4_COMM_CMD_RESET, 0, |
| MLX4_COMM_TIME); |
| /* if we are in the middle of flr the slave will try |
| * NUM_OF_RESET_RETRIES times before leaving.*/ |
| if (ret_from_reset) { |
| if (MLX4_DELAY_RESET_SLAVE == ret_from_reset) { |
| msleep(SLEEP_TIME_IN_RESET); |
| while (ret_from_reset && num_of_reset_retries) { |
| mlx4_warn(dev, "slave is currently in the" |
| "middle of FLR. retrying..." |
| "(try num:%d)\n", |
| (NUM_OF_RESET_RETRIES - |
| num_of_reset_retries + 1)); |
| ret_from_reset = |
| mlx4_comm_cmd(dev, MLX4_COMM_CMD_RESET, |
| 0, MLX4_COMM_TIME); |
| num_of_reset_retries = num_of_reset_retries - 1; |
| } |
| } else |
| goto err; |
| } |
| |
| /* check the driver version - the slave I/F revision |
| * must match the master's */ |
| slave_read = swab32(readl(&priv->mfunc.comm->slave_read)); |
| cmd_channel_ver = mlx4_comm_get_version(); |
| |
| if (MLX4_COMM_GET_IF_REV(cmd_channel_ver) != |
| MLX4_COMM_GET_IF_REV(slave_read)) { |
| mlx4_err(dev, "slave driver version is not supported" |
| " by the master\n"); |
| goto err; |
| } |
| |
| mlx4_warn(dev, "Sending vhcr0\n"); |
| if (mlx4_comm_cmd(dev, MLX4_COMM_CMD_VHCR0, dma >> 48, |
| MLX4_COMM_TIME)) |
| goto err; |
| if (mlx4_comm_cmd(dev, MLX4_COMM_CMD_VHCR1, dma >> 32, |
| MLX4_COMM_TIME)) |
| goto err; |
| if (mlx4_comm_cmd(dev, MLX4_COMM_CMD_VHCR2, dma >> 16, |
| MLX4_COMM_TIME)) |
| goto err; |
| if (mlx4_comm_cmd(dev, MLX4_COMM_CMD_VHCR_EN, dma, MLX4_COMM_TIME)) |
| goto err; |
| up(&priv->cmd.slave_sem); |
| return 0; |
| |
| err: |
| mlx4_comm_cmd(dev, MLX4_COMM_CMD_RESET, 0, 0); |
| up(&priv->cmd.slave_sem); |
| return -EIO; |
| } |
| |
| static int mlx4_init_hca(struct mlx4_dev *dev) |
| { |
| struct mlx4_priv *priv = mlx4_priv(dev); |
| struct mlx4_adapter adapter; |
| struct mlx4_dev_cap dev_cap; |
| struct mlx4_mod_stat_cfg mlx4_cfg; |
| struct mlx4_profile profile; |
| struct mlx4_init_hca_param init_hca; |
| u64 icm_size; |
| int err; |
| |
| if (!mlx4_is_slave(dev)) { |
| err = mlx4_QUERY_FW(dev); |
| if (err) { |
| if (err == -EACCES) |
| mlx4_info(dev, "non-primary physical function, skipping.\n"); |
| else |
| mlx4_err(dev, "QUERY_FW command failed, aborting.\n"); |
| goto unmap_bf; |
| } |
| |
| err = mlx4_load_fw(dev); |
| if (err) { |
| mlx4_err(dev, "Failed to start FW, aborting.\n"); |
| goto unmap_bf; |
| } |
| |
| mlx4_cfg.log_pg_sz_m = 1; |
| mlx4_cfg.log_pg_sz = 0; |
| err = mlx4_MOD_STAT_CFG(dev, &mlx4_cfg); |
| if (err) |
| mlx4_warn(dev, "Failed to override log_pg_sz parameter\n"); |
| |
| err = mlx4_dev_cap(dev, &dev_cap); |
| if (err) { |
| mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n"); |
| goto err_stop_fw; |
| } |
| |
| profile = default_profile; |
| |
| icm_size = mlx4_make_profile(dev, &profile, &dev_cap, |
| &init_hca); |
| if ((long long) icm_size < 0) { |
| err = icm_size; |
| goto err_stop_fw; |
| } |
| |
| init_hca.log_uar_sz = ilog2(dev->caps.num_uars); |
| init_hca.uar_page_sz = PAGE_SHIFT - 12; |
| |
| err = mlx4_init_icm(dev, &dev_cap, &init_hca, icm_size); |
| if (err) |
| goto err_stop_fw; |
| |
| err = mlx4_INIT_HCA(dev, &init_hca); |
| if (err) { |
| mlx4_err(dev, "INIT_HCA command failed, aborting.\n"); |
| goto err_free_icm; |
| } |
| } else { |
| err = mlx4_init_slave(dev); |
| if (err) { |
| mlx4_err(dev, "Failed to initialize slave\n"); |
| goto unmap_bf; |
| } |
| |
| err = mlx4_slave_cap(dev); |
| if (err) { |
| mlx4_err(dev, "Failed to obtain slave caps\n"); |
| goto err_close; |
| } |
| } |
| |
| if (map_bf_area(dev)) |
| mlx4_dbg(dev, "Failed to map blue flame area\n"); |
| |
| /*Only the master set the ports, all the rest got it from it.*/ |
| if (!mlx4_is_slave(dev)) |
| mlx4_set_port_mask(dev); |
| |
| err = mlx4_QUERY_ADAPTER(dev, &adapter); |
| if (err) { |
| mlx4_err(dev, "QUERY_ADAPTER command failed, aborting.\n"); |
| goto err_close; |
| } |
| |
| priv->eq_table.inta_pin = adapter.inta_pin; |
| memcpy(dev->board_id, adapter.board_id, sizeof dev->board_id); |
| |
| return 0; |
| |
| err_close: |
| mlx4_close_hca(dev); |
| |
| err_free_icm: |
| if (!mlx4_is_slave(dev)) |
| mlx4_free_icms(dev); |
| |
| err_stop_fw: |
| if (!mlx4_is_slave(dev)) { |
| mlx4_UNMAP_FA(dev); |
| mlx4_free_icm(dev, priv->fw.fw_icm, 0); |
| } |
| unmap_bf: |
| unmap_bf_area(dev); |
| return err; |
| } |
| |
| static int mlx4_init_counters_table(struct mlx4_dev *dev) |
| { |
| struct mlx4_priv *priv = mlx4_priv(dev); |
| int nent; |
| |
| if (!(dev->caps.flags & MLX4_DEV_CAP_FLAG_COUNTERS)) |
| return -ENOENT; |
| |
| nent = dev->caps.max_counters; |
| return mlx4_bitmap_init(&priv->counters_bitmap, nent, nent - 1, 0, 0); |
| } |
| |
| static void mlx4_cleanup_counters_table(struct mlx4_dev *dev) |
| { |
| mlx4_bitmap_cleanup(&mlx4_priv(dev)->counters_bitmap); |
| } |
| |
| int mlx4_counter_alloc(struct mlx4_dev *dev, u32 *idx) |
| { |
| struct mlx4_priv *priv = mlx4_priv(dev); |
| |
| if (!(dev->caps.flags & MLX4_DEV_CAP_FLAG_COUNTERS)) |
| return -ENOENT; |
| |
| *idx = mlx4_bitmap_alloc(&priv->counters_bitmap); |
| if (*idx == -1) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mlx4_counter_alloc); |
| |
| void mlx4_counter_free(struct mlx4_dev *dev, u32 idx) |
| { |
| mlx4_bitmap_free(&mlx4_priv(dev)->counters_bitmap, idx); |
| return; |
| } |
| EXPORT_SYMBOL_GPL(mlx4_counter_free); |
| |
| static int mlx4_setup_hca(struct mlx4_dev *dev) |
| { |
| struct mlx4_priv *priv = mlx4_priv(dev); |
| int err; |
| int port; |
| __be32 ib_port_default_caps; |
| |
| err = mlx4_init_uar_table(dev); |
| if (err) { |
| mlx4_err(dev, "Failed to initialize " |
| "user access region table, aborting.\n"); |
| return err; |
| } |
| |
| err = mlx4_uar_alloc(dev, &priv->driver_uar); |
| if (err) { |
| mlx4_err(dev, "Failed to allocate driver access region, " |
| "aborting.\n"); |
| goto err_uar_table_free; |
| } |
| |
| priv->kar = ioremap((phys_addr_t) priv->driver_uar.pfn << PAGE_SHIFT, PAGE_SIZE); |
| if (!priv->kar) { |
| mlx4_err(dev, "Couldn't map kernel access region, " |
| "aborting.\n"); |
| err = -ENOMEM; |
| goto err_uar_free; |
| } |
| |
| err = mlx4_init_pd_table(dev); |
| if (err) { |
| mlx4_err(dev, "Failed to initialize " |
| "protection domain table, aborting.\n"); |
| goto err_kar_unmap; |
| } |
| |
| err = mlx4_init_xrcd_table(dev); |
| if (err) { |
| mlx4_err(dev, "Failed to initialize " |
| "reliable connection domain table, aborting.\n"); |
| goto err_pd_table_free; |
| } |
| |
| err = mlx4_init_mr_table(dev); |
| if (err) { |
| mlx4_err(dev, "Failed to initialize " |
| "memory region table, aborting.\n"); |
| goto err_xrcd_table_free; |
| } |
| |
| err = mlx4_init_eq_table(dev); |
| if (err) { |
| mlx4_err(dev, "Failed to initialize " |
| "event queue table, aborting.\n"); |
| goto err_mr_table_free; |
| } |
| |
| err = mlx4_cmd_use_events(dev); |
| if (err) { |
| mlx4_err(dev, "Failed to switch to event-driven " |
| "firmware commands, aborting.\n"); |
| goto err_eq_table_free; |
| } |
| |
| err = mlx4_NOP(dev); |
| if (err) { |
| if (dev->flags & MLX4_FLAG_MSI_X) { |
| mlx4_warn(dev, "NOP command failed to generate MSI-X " |
| "interrupt IRQ %d).\n", |
| priv->eq_table.eq[dev->caps.num_comp_vectors].irq); |
| mlx4_warn(dev, "Trying again without MSI-X.\n"); |
| } else { |
| mlx4_err(dev, "NOP command failed to generate interrupt " |
| "(IRQ %d), aborting.\n", |
| priv->eq_table.eq[dev->caps.num_comp_vectors].irq); |
| mlx4_err(dev, "BIOS or ACPI interrupt routing problem?\n"); |
| } |
| |
| goto err_cmd_poll; |
| } |
| |
| mlx4_dbg(dev, "NOP command IRQ test passed\n"); |
| |
| err = mlx4_init_cq_table(dev); |
| if (err) { |
| mlx4_err(dev, "Failed to initialize " |
| "completion queue table, aborting.\n"); |
| goto err_cmd_poll; |
| } |
| |
| err = mlx4_init_srq_table(dev); |
| if (err) { |
| mlx4_err(dev, "Failed to initialize " |
| "shared receive queue table, aborting.\n"); |
| goto err_cq_table_free; |
| } |
| |
| err = mlx4_init_qp_table(dev); |
| if (err) { |
| mlx4_err(dev, "Failed to initialize " |
| "queue pair table, aborting.\n"); |
| goto err_srq_table_free; |
| } |
| |
| if (!mlx4_is_slave(dev)) { |
| err = mlx4_init_mcg_table(dev); |
| if (err) { |
| mlx4_err(dev, "Failed to initialize " |
| "multicast group table, aborting.\n"); |
| goto err_qp_table_free; |
| } |
| } |
| |
| err = mlx4_init_counters_table(dev); |
| if (err && err != -ENOENT) { |
| mlx4_err(dev, "Failed to initialize counters table, aborting.\n"); |
| goto err_mcg_table_free; |
| } |
| |
| if (!mlx4_is_slave(dev)) { |
| for (port = 1; port <= dev->caps.num_ports; port++) { |
| ib_port_default_caps = 0; |
| err = mlx4_get_port_ib_caps(dev, port, |
| &ib_port_default_caps); |
| if (err) |
| mlx4_warn(dev, "failed to get port %d default " |
| "ib capabilities (%d). Continuing " |
| "with caps = 0\n", port, err); |
| dev->caps.ib_port_def_cap[port] = ib_port_default_caps; |
| |
| err = mlx4_check_ext_port_caps(dev, port); |
| if (err) |
| mlx4_warn(dev, "failed to get port %d extended " |
| "port capabilities support info (%d)." |
| " Assuming not supported\n", |
| port, err); |
| |
| err = mlx4_SET_PORT(dev, port); |
| if (err) { |
| mlx4_err(dev, "Failed to set port %d, aborting\n", |
| port); |
| goto err_counters_table_free; |
| } |
| } |
| } |
| |
| return 0; |
| |
| err_counters_table_free: |
| mlx4_cleanup_counters_table(dev); |
| |
| err_mcg_table_free: |
| mlx4_cleanup_mcg_table(dev); |
| |
| err_qp_table_free: |
| mlx4_cleanup_qp_table(dev); |
| |
| err_srq_table_free: |
| mlx4_cleanup_srq_table(dev); |
| |
| err_cq_table_free: |
| mlx4_cleanup_cq_table(dev); |
| |
| err_cmd_poll: |
| mlx4_cmd_use_polling(dev); |
| |
| err_eq_table_free: |
| mlx4_cleanup_eq_table(dev); |
| |
| err_mr_table_free: |
| mlx4_cleanup_mr_table(dev); |
| |
| err_xrcd_table_free: |
| mlx4_cleanup_xrcd_table(dev); |
| |
| err_pd_table_free: |
| mlx4_cleanup_pd_table(dev); |
| |
| err_kar_unmap: |
| iounmap(priv->kar); |
| |
| err_uar_free: |
| mlx4_uar_free(dev, &priv->driver_uar); |
| |
| err_uar_table_free: |
| mlx4_cleanup_uar_table(dev); |
| return err; |
| } |
| |
| static void mlx4_enable_msi_x(struct mlx4_dev *dev) |
| { |
| struct mlx4_priv *priv = mlx4_priv(dev); |
| struct msix_entry *entries; |
| int nreq = min_t(int, dev->caps.num_ports * |
| min_t(int, num_online_cpus() + 1, MAX_MSIX_P_PORT) |
| + MSIX_LEGACY_SZ, MAX_MSIX); |
| int err; |
| int i; |
| |
| if (msi_x) { |
| /* In multifunction mode each function gets 2 msi-X vectors |
| * one for data path completions anf the other for asynch events |
| * or command completions */ |
| if (mlx4_is_mfunc(dev)) { |
| nreq = 2; |
| } else { |
| nreq = min_t(int, dev->caps.num_eqs - |
| dev->caps.reserved_eqs, nreq); |
| } |
| |
| entries = kcalloc(nreq, sizeof *entries, GFP_KERNEL); |
| if (!entries) |
| goto no_msi; |
| |
| for (i = 0; i < nreq; ++i) |
| entries[i].entry = i; |
| |
| retry: |
| err = pci_enable_msix(dev->pdev, entries, nreq); |
| if (err) { |
| /* Try again if at least 2 vectors are available */ |
| if (err > 1) { |
| mlx4_info(dev, "Requested %d vectors, " |
| "but only %d MSI-X vectors available, " |
| "trying again\n", nreq, err); |
| nreq = err; |
| goto retry; |
| } |
| kfree(entries); |
| goto no_msi; |
| } |
| |
| if (nreq < |
| MSIX_LEGACY_SZ + dev->caps.num_ports * MIN_MSIX_P_PORT) { |
| /*Working in legacy mode , all EQ's shared*/ |
| dev->caps.comp_pool = 0; |
| dev->caps.num_comp_vectors = nreq - 1; |
| } else { |
| dev->caps.comp_pool = nreq - MSIX_LEGACY_SZ; |
| dev->caps.num_comp_vectors = MSIX_LEGACY_SZ - 1; |
| } |
| for (i = 0; i < nreq; ++i) |
| priv->eq_table.eq[i].irq = entries[i].vector; |
| |
| dev->flags |= MLX4_FLAG_MSI_X; |
| |
| kfree(entries); |
| return; |
| } |
| |
| no_msi: |
| dev->caps.num_comp_vectors = 1; |
| dev->caps.comp_pool = 0; |
| |
| for (i = 0; i < 2; ++i) |
| priv->eq_table.eq[i].irq = dev->pdev->irq; |
| } |
| |
| static int mlx4_init_port_info(struct mlx4_dev *dev, int port) |
| { |
| struct mlx4_port_info *info = &mlx4_priv(dev)->port[port]; |
| int err = 0; |
| |
| info->dev = dev; |
| info->port = port; |
| if (!mlx4_is_slave(dev)) { |
| INIT_RADIX_TREE(&info->mac_tree, GFP_KERNEL); |
| mlx4_init_mac_table(dev, &info->mac_table); |
| mlx4_init_vlan_table(dev, &info->vlan_table); |
| info->base_qpn = |
| dev->caps.reserved_qps_base[MLX4_QP_REGION_ETH_ADDR] + |
| (port - 1) * (1 << log_num_mac); |
| } |
| |
| sprintf(info->dev_name, "mlx4_port%d", port); |
| info->port_attr.attr.name = info->dev_name; |
| if (mlx4_is_mfunc(dev)) |
| info->port_attr.attr.mode = S_IRUGO; |
| else { |
| info->port_attr.attr.mode = S_IRUGO | S_IWUSR; |
| info->port_attr.store = set_port_type; |
| } |
| info->port_attr.show = show_port_type; |
| sysfs_attr_init(&info->port_attr.attr); |
| |
| err = device_create_file(&dev->pdev->dev, &info->port_attr); |
| if (err) { |
| mlx4_err(dev, "Failed to create file for port %d\n", port); |
| info->port = -1; |
| } |
| |
| return err; |
| } |
| |
| static void mlx4_cleanup_port_info(struct mlx4_port_info *info) |
| { |
| if (info->port < 0) |
| return; |
| |
| device_remove_file(&info->dev->pdev->dev, &info->port_attr); |
| } |
| |
| static int mlx4_init_steering(struct mlx4_dev *dev) |
| { |
| struct mlx4_priv *priv = mlx4_priv(dev); |
| int num_entries = dev->caps.num_ports; |
| int i, j; |
| |
| priv->steer = kzalloc(sizeof(struct mlx4_steer) * num_entries, GFP_KERNEL); |
| if (!priv->steer) |
| return -ENOMEM; |
| |
| for (i = 0; i < num_entries; i++) { |
| for (j = 0; j < MLX4_NUM_STEERS; j++) { |
| INIT_LIST_HEAD(&priv->steer[i].promisc_qps[j]); |
| INIT_LIST_HEAD(&priv->steer[i].steer_entries[j]); |
| } |
| INIT_LIST_HEAD(&priv->steer[i].high_prios); |
| } |
| return 0; |
| } |
| |
| static void mlx4_clear_steering(struct mlx4_dev *dev) |
| { |
| struct mlx4_priv *priv = mlx4_priv(dev); |
| struct mlx4_steer_index *entry, *tmp_entry; |
| struct mlx4_promisc_qp *pqp, *tmp_pqp; |
| int num_entries = dev->caps.num_ports; |
| int i, j; |
| |
| for (i = 0; i < num_entries; i++) { |
| for (j = 0; j < MLX4_NUM_STEERS; j++) { |
| list_for_each_entry_safe(pqp, tmp_pqp, |
| &priv->steer[i].promisc_qps[j], |
| list) { |
| list_del(&pqp->list); |
| kfree(pqp); |
| } |
| list_for_each_entry_safe(entry, tmp_entry, |
| &priv->steer[i].steer_entries[j], |
| list) { |
| list_del(&entry->list); |
| list_for_each_entry_safe(pqp, tmp_pqp, |
| &entry->duplicates, |
| list) { |
| list_del(&pqp->list); |
| kfree(pqp); |
| } |
| kfree(entry); |
| } |
| } |
| } |
| kfree(priv->steer); |
| } |
| |
| static int extended_func_num(struct pci_dev *pdev) |
| { |
| return PCI_SLOT(pdev->devfn) * 8 + PCI_FUNC(pdev->devfn); |
| } |
| |
| #define MLX4_OWNER_BASE 0x8069c |
| #define MLX4_OWNER_SIZE 4 |
| |
| static int mlx4_get_ownership(struct mlx4_dev *dev) |
| { |
| void __iomem *owner; |
| u32 ret; |
| |
| owner = ioremap(pci_resource_start(dev->pdev, 0) + MLX4_OWNER_BASE, |
| MLX4_OWNER_SIZE); |
| if (!owner) { |
| mlx4_err(dev, "Failed to obtain ownership bit\n"); |
| return -ENOMEM; |
| } |
| |
| ret = readl(owner); |
| iounmap(owner); |
| return (int) !!ret; |
| } |
| |
| static void mlx4_free_ownership(struct mlx4_dev *dev) |
| { |
| void __iomem *owner; |
| |
| owner = ioremap(pci_resource_start(dev->pdev, 0) + MLX4_OWNER_BASE, |
| MLX4_OWNER_SIZE); |
| if (!owner) { |
| mlx4_err(dev, "Failed to obtain ownership bit\n"); |
| return; |
| } |
| writel(0, owner); |
| msleep(1000); |
| iounmap(owner); |
| } |
| |
| static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id) |
| { |
| struct mlx4_priv *priv; |
| struct mlx4_dev *dev; |
| int err; |
| int port; |
| |
| pr_info(DRV_NAME ": Initializing %s\n", pci_name(pdev)); |
| |
| err = pci_enable_device(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "Cannot enable PCI device, " |
| "aborting.\n"); |
| return err; |
| } |
| if (num_vfs > MLX4_MAX_NUM_VF) { |
| printk(KERN_ERR "There are more VF's (%d) than allowed(%d)\n", |
| num_vfs, MLX4_MAX_NUM_VF); |
| return -EINVAL; |
| } |
| /* |
| * Check for BARs. |
| */ |
| if (((id == NULL) || !(id->driver_data & MLX4_VF)) && |
| !(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { |
| dev_err(&pdev->dev, "Missing DCS, aborting." |
| "(id == 0X%p, id->driver_data: 0x%lx," |
| " pci_resource_flags(pdev, 0):0x%lx)\n", id, |
| id ? id->driver_data : 0, pci_resource_flags(pdev, 0)); |
| err = -ENODEV; |
| goto err_disable_pdev; |
| } |
| if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) { |
| dev_err(&pdev->dev, "Missing UAR, aborting.\n"); |
| err = -ENODEV; |
| goto err_disable_pdev; |
| } |
| |
| err = pci_request_regions(pdev, DRV_NAME); |
| if (err) { |
| dev_err(&pdev->dev, "Couldn't get PCI resources, aborting\n"); |
| goto err_disable_pdev; |
| } |
| |
| pci_set_master(pdev); |
| |
| err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); |
| if (err) { |
| dev_warn(&pdev->dev, "Warning: couldn't set 64-bit PCI DMA mask.\n"); |
| err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
| if (err) { |
| dev_err(&pdev->dev, "Can't set PCI DMA mask, aborting.\n"); |
| goto err_release_regions; |
| } |
| } |
| err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); |
| if (err) { |
| dev_warn(&pdev->dev, "Warning: couldn't set 64-bit " |
| "consistent PCI DMA mask.\n"); |
| err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); |
| if (err) { |
| dev_err(&pdev->dev, "Can't set consistent PCI DMA mask, " |
| "aborting.\n"); |
| goto err_release_regions; |
| } |
| } |
| |
| /* Allow large DMA segments, up to the firmware limit of 1 GB */ |
| dma_set_max_seg_size(&pdev->dev, 1024 * 1024 * 1024); |
| |
| priv = kzalloc(sizeof *priv, GFP_KERNEL); |
| if (!priv) { |
| dev_err(&pdev->dev, "Device struct alloc failed, " |
| "aborting.\n"); |
| err = -ENOMEM; |
| goto err_release_regions; |
| } |
| |
| dev = &priv->dev; |
| dev->pdev = pdev; |
| INIT_LIST_HEAD(&priv->ctx_list); |
| spin_lock_init(&priv->ctx_lock); |
| |
| mutex_init(&priv->port_mutex); |
| |
| INIT_LIST_HEAD(&priv->pgdir_list); |
| mutex_init(&priv->pgdir_mutex); |
| |
| INIT_LIST_HEAD(&priv->bf_list); |
| mutex_init(&priv->bf_mutex); |
| |
| dev->rev_id = pdev->revision; |
| /* Detect if this device is a virtual function */ |
| if (id && id->driver_data & MLX4_VF) { |
| /* When acting as pf, we normally skip vfs unless explicitly |
| * requested to probe them. */ |
| if (num_vfs && extended_func_num(pdev) > probe_vf) { |
| mlx4_warn(dev, "Skipping virtual function:%d\n", |
| extended_func_num(pdev)); |
| err = -ENODEV; |
| goto err_free_dev; |
| } |
| mlx4_warn(dev, "Detected virtual function - running in slave mode\n"); |
| dev->flags |= MLX4_FLAG_SLAVE; |
| } else { |
| /* We reset the device and enable SRIOV only for physical |
| * devices. Try to claim ownership on the device; |
| * if already taken, skip -- do not allow multiple PFs */ |
| err = mlx4_get_ownership(dev); |
| if (err) { |
| if (err < 0) |
| goto err_free_dev; |
| else { |
| mlx4_warn(dev, "Multiple PFs not yet supported." |
| " Skipping PF.\n"); |
| err = -EINVAL; |
| goto err_free_dev; |
| } |
| } |
| |
| if (num_vfs) { |
| mlx4_warn(dev, "Enabling sriov with:%d vfs\n", num_vfs); |
| err = pci_enable_sriov(pdev, num_vfs); |
| if (err) { |
| mlx4_err(dev, "Failed to enable sriov," |
| "continuing without sriov enabled" |
| " (err = %d).\n", err); |
| num_vfs = 0; |
| err = 0; |
| } else { |
| mlx4_warn(dev, "Running in master mode\n"); |
| dev->flags |= MLX4_FLAG_SRIOV | |
| MLX4_FLAG_MASTER; |
| dev->num_vfs = num_vfs; |
| } |
| } |
| |
| /* |
| * Now reset the HCA before we touch the PCI capabilities or |
| * attempt a firmware command, since a boot ROM may have left |
| * the HCA in an undefined state. |
| */ |
| err = mlx4_reset(dev); |
| if (err) { |
| mlx4_err(dev, "Failed to reset HCA, aborting.\n"); |
| goto err_rel_own; |
| } |
| } |
| |
| slave_start: |
| if (mlx4_cmd_init(dev)) { |
| mlx4_err(dev, "Failed to init command interface, aborting.\n"); |
| goto err_sriov; |
| } |
| |
| /* In slave functions, the communication channel must be initialized |
| * before posting commands. Also, init num_slaves before calling |
| * mlx4_init_hca */ |
| if (mlx4_is_mfunc(dev)) { |
| if (mlx4_is_master(dev)) |
| dev->num_slaves = MLX4_MAX_NUM_SLAVES; |
| else { |
| dev->num_slaves = 0; |
| if (mlx4_multi_func_init(dev)) { |
| mlx4_err(dev, "Failed to init slave mfunc" |
| " interface, aborting.\n"); |
| goto err_cmd; |
| } |
| } |
| } |
| |
| err = mlx4_init_hca(dev); |
| if (err) { |
| if (err == -EACCES) { |
| /* Not primary Physical function |
| * Running in slave mode */ |
| mlx4_cmd_cleanup(dev); |
| dev->flags |= MLX4_FLAG_SLAVE; |
| dev->flags &= ~MLX4_FLAG_MASTER; |
| goto slave_start; |
| } else |
| goto err_mfunc; |
| } |
| |
| /* In master functions, the communication channel must be initialized |
| * after obtaining its address from fw */ |
| if (mlx4_is_master(dev)) { |
| if (mlx4_multi_func_init(dev)) { |
| mlx4_err(dev, "Failed to init master mfunc" |
| "interface, aborting.\n"); |
| goto err_close; |
| } |
| } |
| |
| err = mlx4_alloc_eq_table(dev); |
| if (err) |
| goto err_master_mfunc; |
| |
| priv->msix_ctl.pool_bm = 0; |
| spin_lock_init(&priv->msix_ctl.pool_lock); |
| |
| mlx4_enable_msi_x(dev); |
| if ((mlx4_is_mfunc(dev)) && |
| !(dev->flags & MLX4_FLAG_MSI_X)) { |
| mlx4_err(dev, "INTx is not supported in multi-function mode." |
| " aborting.\n"); |
| goto err_free_eq; |
| } |
| |
| if (!mlx4_is_slave(dev)) { |
| err = mlx4_init_steering(dev); |
| if (err) |
| goto err_free_eq; |
| } |
| |
| err = mlx4_setup_hca(dev); |
| if (err == -EBUSY && (dev->flags & MLX4_FLAG_MSI_X) && |
| !mlx4_is_mfunc(dev)) { |
| dev->flags &= ~MLX4_FLAG_MSI_X; |
| pci_disable_msix(pdev); |
| err = mlx4_setup_hca(dev); |
| } |
| |
| if (err) |
| goto err_steer; |
| |
| for (port = 1; port <= dev->caps.num_ports; port++) { |
| err = mlx4_init_port_info(dev, port); |
| if (err) |
| goto err_port; |
| } |
| |
| err = mlx4_register_device(dev); |
| if (err) |
| goto err_port; |
| |
| mlx4_sense_init(dev); |
| mlx4_start_sense(dev); |
| |
| pci_set_drvdata(pdev, dev); |
| |
| return 0; |
| |
| err_port: |
| for (--port; port >= 1; --port) |
| mlx4_cleanup_port_info(&priv->port[port]); |
| |
| mlx4_cleanup_counters_table(dev); |
| mlx4_cleanup_mcg_table(dev); |
| mlx4_cleanup_qp_table(dev); |
| mlx4_cleanup_srq_table(dev); |
| mlx4_cleanup_cq_table(dev); |
| mlx4_cmd_use_polling(dev); |
| mlx4_cleanup_eq_table(dev); |
| mlx4_cleanup_mr_table(dev); |
| mlx4_cleanup_xrcd_table(dev); |
| mlx4_cleanup_pd_table(dev); |
| mlx4_cleanup_uar_table(dev); |
| |
| err_steer: |
| if (!mlx4_is_slave(dev)) |
| mlx4_clear_steering(dev); |
| |
| err_free_eq: |
| mlx4_free_eq_table(dev); |
| |
| err_master_mfunc: |
| if (mlx4_is_master(dev)) |
| mlx4_multi_func_cleanup(dev); |
| |
| err_close: |
| if (dev->flags & MLX4_FLAG_MSI_X) |
| pci_disable_msix(pdev); |
| |
| mlx4_close_hca(dev); |
| |
| err_mfunc: |
| if (mlx4_is_slave(dev)) |
| mlx4_multi_func_cleanup(dev); |
| |
| err_cmd: |
| mlx4_cmd_cleanup(dev); |
| |
| err_sriov: |
| if (num_vfs && (dev->flags & MLX4_FLAG_SRIOV)) |
| pci_disable_sriov(pdev); |
| |
| err_rel_own: |
| if (!mlx4_is_slave(dev)) |
| mlx4_free_ownership(dev); |
| |
| err_free_dev: |
| kfree(priv); |
| |
| err_release_regions: |
| pci_release_regions(pdev); |
| |
| err_disable_pdev: |
| pci_disable_device(pdev); |
| pci_set_drvdata(pdev, NULL); |
| return err; |
| } |
| |
| static int __devinit mlx4_init_one(struct pci_dev *pdev, |
| const struct pci_device_id *id) |
| { |
| printk_once(KERN_INFO "%s", mlx4_version); |
| |
| return __mlx4_init_one(pdev, id); |
| } |
| |
| static void mlx4_remove_one(struct pci_dev *pdev) |
| { |
| struct mlx4_dev *dev = pci_get_drvdata(pdev); |
| struct mlx4_priv *priv = mlx4_priv(dev); |
| int p; |
| |
| if (dev) { |
| /* in SRIOV it is not allowed to unload the pf's |
| * driver while there are alive vf's */ |
| if (mlx4_is_master(dev)) { |
| if (mlx4_how_many_lives_vf(dev)) |
| printk(KERN_ERR "Removing PF when there are assigned VF's !!!\n"); |
| } |
| mlx4_stop_sense(dev); |
| mlx4_unregister_device(dev); |
| |
| for (p = 1; p <= dev->caps.num_ports; p++) { |
| mlx4_cleanup_port_info(&priv->port[p]); |
| mlx4_CLOSE_PORT(dev, p); |
| } |
| |
| mlx4_cleanup_counters_table(dev); |
| mlx4_cleanup_mcg_table(dev); |
| mlx4_cleanup_qp_table(dev); |
| mlx4_cleanup_srq_table(dev); |
| mlx4_cleanup_cq_table(dev); |
| mlx4_cmd_use_polling(dev); |
| mlx4_cleanup_eq_table(dev); |
| mlx4_cleanup_mr_table(dev); |
| mlx4_cleanup_xrcd_table(dev); |
| mlx4_cleanup_pd_table(dev); |
| |
| if (mlx4_is_master(dev)) |
| mlx4_free_resource_tracker(dev); |
| |
| iounmap(priv->kar); |
| mlx4_uar_free(dev, &priv->driver_uar); |
| mlx4_cleanup_uar_table(dev); |
| if (!mlx4_is_slave(dev)) |
| mlx4_clear_steering(dev); |
| mlx4_free_eq_table(dev); |
| if (mlx4_is_master(dev)) |
| mlx4_multi_func_cleanup(dev); |
| mlx4_close_hca(dev); |
| if (mlx4_is_slave(dev)) |
| mlx4_multi_func_cleanup(dev); |
| mlx4_cmd_cleanup(dev); |
| |
| if (dev->flags & MLX4_FLAG_MSI_X) |
| pci_disable_msix(pdev); |
| if (num_vfs && (dev->flags & MLX4_FLAG_SRIOV)) { |
| mlx4_warn(dev, "Disabling sriov\n"); |
| pci_disable_sriov(pdev); |
| } |
| |
| if (!mlx4_is_slave(dev)) |
| mlx4_free_ownership(dev); |
| kfree(priv); |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| pci_set_drvdata(pdev, NULL); |
| } |
| } |
| |
| int mlx4_restart_one(struct pci_dev *pdev) |
| { |
| mlx4_remove_one(pdev); |
| return __mlx4_init_one(pdev, NULL); |
| } |
| |
| static DEFINE_PCI_DEVICE_TABLE(mlx4_pci_table) = { |
| /* MT25408 "Hermon" SDR */ |
| { PCI_VDEVICE(MELLANOX, 0x6340), 0 }, |
| /* MT25408 "Hermon" DDR */ |
| { PCI_VDEVICE(MELLANOX, 0x634a), 0 }, |
| /* MT25408 "Hermon" QDR */ |
| { PCI_VDEVICE(MELLANOX, 0x6354), 0 }, |
| /* MT25408 "Hermon" DDR PCIe gen2 */ |
| { PCI_VDEVICE(MELLANOX, 0x6732), 0 }, |
| /* MT25408 "Hermon" QDR PCIe gen2 */ |
| { PCI_VDEVICE(MELLANOX, 0x673c), 0 }, |
| /* MT25408 "Hermon" EN 10GigE */ |
| { PCI_VDEVICE(MELLANOX, 0x6368), 0 }, |
| /* MT25408 "Hermon" EN 10GigE PCIe gen2 */ |
| { PCI_VDEVICE(MELLANOX, 0x6750), 0 }, |
| /* MT25458 ConnectX EN 10GBASE-T 10GigE */ |
| { PCI_VDEVICE(MELLANOX, 0x6372), 0 }, |
| /* MT25458 ConnectX EN 10GBASE-T+Gen2 10GigE */ |
| { PCI_VDEVICE(MELLANOX, 0x675a), 0 }, |
| /* MT26468 ConnectX EN 10GigE PCIe gen2*/ |
| { PCI_VDEVICE(MELLANOX, 0x6764), 0 }, |
| /* MT26438 ConnectX EN 40GigE PCIe gen2 5GT/s */ |
| { PCI_VDEVICE(MELLANOX, 0x6746), 0 }, |
| /* MT26478 ConnectX2 40GigE PCIe gen2 */ |
| { PCI_VDEVICE(MELLANOX, 0x676e), 0 }, |
| /* MT25400 Family [ConnectX-2 Virtual Function] */ |
| { PCI_VDEVICE(MELLANOX, 0x1002), MLX4_VF }, |
| /* MT27500 Family [ConnectX-3] */ |
| { PCI_VDEVICE(MELLANOX, 0x1003), 0 }, |
| /* MT27500 Family [ConnectX-3 Virtual Function] */ |
| { PCI_VDEVICE(MELLANOX, 0x1004), MLX4_VF }, |
| { PCI_VDEVICE(MELLANOX, 0x1005), 0 }, /* MT27510 Family */ |
| { PCI_VDEVICE(MELLANOX, 0x1006), 0 }, /* MT27511 Family */ |
| { PCI_VDEVICE(MELLANOX, 0x1007), 0 }, /* MT27520 Family */ |
| { PCI_VDEVICE(MELLANOX, 0x1008), 0 }, /* MT27521 Family */ |
| { PCI_VDEVICE(MELLANOX, 0x1009), 0 }, /* MT27530 Family */ |
| { PCI_VDEVICE(MELLANOX, 0x100a), 0 }, /* MT27531 Family */ |
| { PCI_VDEVICE(MELLANOX, 0x100b), 0 }, /* MT27540 Family */ |
| { PCI_VDEVICE(MELLANOX, 0x100c), 0 }, /* MT27541 Family */ |
| { PCI_VDEVICE(MELLANOX, 0x100d), 0 }, /* MT27550 Family */ |
| { PCI_VDEVICE(MELLANOX, 0x100e), 0 }, /* MT27551 Family */ |
| { PCI_VDEVICE(MELLANOX, 0x100f), 0 }, /* MT27560 Family */ |
| { PCI_VDEVICE(MELLANOX, 0x1010), 0 }, /* MT27561 Family */ |
| { 0, } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, mlx4_pci_table); |
| |
| static struct pci_driver mlx4_driver = { |
| .name = DRV_NAME, |
| .id_table = mlx4_pci_table, |
| .probe = mlx4_init_one, |
| .remove = __devexit_p(mlx4_remove_one) |
| }; |
| |
| static int __init mlx4_verify_params(void) |
| { |
| if ((log_num_mac < 0) || (log_num_mac > 7)) { |
| pr_warning("mlx4_core: bad num_mac: %d\n", log_num_mac); |
| return -1; |
| } |
| |
| if (log_num_vlan != 0) |
| pr_warning("mlx4_core: log_num_vlan - obsolete module param, using %d\n", |
| MLX4_LOG_NUM_VLANS); |
| |
| if ((log_mtts_per_seg < 1) || (log_mtts_per_seg > 7)) { |
| pr_warning("mlx4_core: bad log_mtts_per_seg: %d\n", log_mtts_per_seg); |
| return -1; |
| } |
| |
| /* Check if module param for ports type has legal combination */ |
| if (port_type_array[0] == false && port_type_array[1] == true) { |
| printk(KERN_WARNING "Module parameter configuration ETH/IB is not supported. Switching to default configuration IB/IB\n"); |
| port_type_array[0] = true; |
| } |
| |
| return 0; |
| } |
| |
| static int __init mlx4_init(void) |
| { |
| int ret; |
| |
| if (mlx4_verify_params()) |
| return -EINVAL; |
| |
| mlx4_catas_init(); |
| |
| mlx4_wq = create_singlethread_workqueue("mlx4"); |
| if (!mlx4_wq) |
| return -ENOMEM; |
| |
| ret = pci_register_driver(&mlx4_driver); |
| return ret < 0 ? ret : 0; |
| } |
| |
| static void __exit mlx4_cleanup(void) |
| { |
| pci_unregister_driver(&mlx4_driver); |
| destroy_workqueue(mlx4_wq); |
| } |
| |
| module_init(mlx4_init); |
| module_exit(mlx4_cleanup); |