| # SPDX-License-Identifier: GPL-2.0-only |
| config DRM_BRIDGE |
| def_bool y |
| depends on DRM |
| help |
| Bridge registration and lookup framework. |
| |
| config DRM_PANEL_BRIDGE |
| def_bool y |
| depends on DRM_BRIDGE |
| select DRM_PANEL |
| help |
| DRM bridge wrapper of DRM panels |
| |
| menu "Display Interface Bridges" |
| depends on DRM && DRM_BRIDGE |
| |
| config DRM_CDNS_DSI |
| tristate "Cadence DPI/DSI bridge" |
| select DRM_KMS_HELPER |
| select DRM_MIPI_DSI |
| select DRM_PANEL_BRIDGE |
| select GENERIC_PHY_MIPI_DPHY |
| depends on OF |
| help |
| Support Cadence DPI to DSI bridge. This is an internal |
| bridge and is meant to be directly embedded in a SoC. |
| |
| config DRM_CHIPONE_ICN6211 |
| tristate "Chipone ICN6211 MIPI-DSI/RGB Converter bridge" |
| depends on OF |
| select DRM_KMS_HELPER |
| select DRM_MIPI_DSI |
| select DRM_PANEL_BRIDGE |
| select REGMAP_I2C |
| help |
| ICN6211 is MIPI-DSI/RGB Converter bridge from chipone. |
| |
| It has a flexible configuration of MIPI DSI signal input |
| and produce RGB565, RGB666, RGB888 output format. |
| |
| If in doubt, say "N". |
| |
| config DRM_CHRONTEL_CH7033 |
| tristate "Chrontel CH7033 Video Encoder" |
| depends on OF |
| select DRM_KMS_HELPER |
| help |
| Enable support for the Chrontel CH7033 VGA/DVI/HDMI Encoder, as |
| found in the Dell Wyse 3020 thin client. |
| |
| If in doubt, say "N". |
| |
| config DRM_CROS_EC_ANX7688 |
| tristate "ChromeOS EC ANX7688 bridge" |
| depends on OF |
| depends on I2C_CROS_EC_TUNNEL || COMPILE_TEST |
| select DRM_KMS_HELPER |
| select REGMAP_I2C |
| help |
| ChromeOS EC ANX7688 is an ultra-low power |
| 4K Ultra-HD (4096x2160p60) mobile HD transmitter |
| designed for ChromeOS devices. It converts HDMI |
| 2.0 to DisplayPort 1.3 Ultra-HD. It is connected |
| to the ChromeOS Embedded Controller. |
| |
| config DRM_DISPLAY_CONNECTOR |
| tristate "Display connector support" |
| depends on OF |
| help |
| Driver for display connectors with support for DDC and hot-plug |
| detection. Most display controllers handle display connectors |
| internally and don't need this driver, but the DRM subsystem is |
| moving towards separating connector handling from display controllers |
| on ARM-based platforms. Saying Y here when this driver is not needed |
| will not cause any issue. |
| |
| config DRM_FSL_LDB |
| tristate "Freescale i.MX8MP LDB bridge" |
| depends on OF |
| depends on ARCH_MXC || COMPILE_TEST |
| select DRM_KMS_HELPER |
| select DRM_PANEL_BRIDGE |
| help |
| Support for i.MX8MP DPI-to-LVDS on-SoC encoder. |
| |
| config DRM_ITE_IT6505 |
| tristate "ITE IT6505 DisplayPort bridge" |
| depends on OF |
| select DRM_DISPLAY_DP_HELPER |
| select DRM_DISPLAY_HDCP_HELPER |
| select DRM_DISPLAY_HELPER |
| select DRM_DP_AUX_BUS |
| select DRM_KMS_HELPER |
| select DRM_DP_HELPER |
| select EXTCON |
| select CRYPTO |
| select CRYPTO_HASH |
| help |
| ITE IT6505 DisplayPort bridge chip driver. |
| |
| config DRM_LONTIUM_LT8912B |
| tristate "Lontium LT8912B DSI/HDMI bridge" |
| depends on OF |
| select DRM_PANEL_BRIDGE |
| select DRM_KMS_HELPER |
| select DRM_MIPI_DSI |
| select REGMAP_I2C |
| select VIDEOMODE_HELPERS |
| help |
| Driver for Lontium LT8912B DSI to HDMI bridge |
| chip driver. |
| Please say Y if you have such hardware. |
| |
| Say M here if you want to support this hardware as a module. |
| The module will be named "lontium-lt8912b". |
| |
| config DRM_LONTIUM_LT9211 |
| tristate "Lontium LT9211 DSI/LVDS/DPI bridge" |
| depends on OF |
| select DRM_PANEL_BRIDGE |
| select DRM_KMS_HELPER |
| select DRM_MIPI_DSI |
| select REGMAP_I2C |
| help |
| Driver for Lontium LT9211 Single/Dual-Link DSI/LVDS or Single DPI |
| input to Single-link/Dual-Link DSI/LVDS or Single DPI output bridge |
| chip. |
| Please say Y if you have such hardware. |
| |
| config DRM_LONTIUM_LT9611 |
| tristate "Lontium LT9611 DSI/HDMI bridge" |
| select SND_SOC_HDMI_CODEC if SND_SOC |
| depends on OF |
| select DRM_PANEL_BRIDGE |
| select DRM_KMS_HELPER |
| select DRM_MIPI_DSI |
| select REGMAP_I2C |
| help |
| Driver for Lontium LT9611 DSI to HDMI bridge |
| chip driver that converts dual DSI and I2S to |
| HDMI signals |
| Please say Y if you have such hardware. |
| |
| config DRM_LONTIUM_LT9611UXC |
| tristate "Lontium LT9611UXC DSI/HDMI bridge" |
| select SND_SOC_HDMI_CODEC if SND_SOC |
| depends on OF |
| select DRM_PANEL_BRIDGE |
| select DRM_KMS_HELPER |
| select DRM_MIPI_DSI |
| select REGMAP_I2C |
| help |
| Driver for Lontium LT9611UXC DSI to HDMI bridge |
| chip driver that converts dual DSI and I2S to |
| HDMI signals |
| Please say Y if you have such hardware. |
| |
| config DRM_ITE_IT66121 |
| tristate "ITE IT66121 HDMI bridge" |
| depends on OF |
| select DRM_KMS_HELPER |
| select REGMAP_I2C |
| help |
| Support for ITE IT66121 HDMI bridge. |
| |
| config DRM_LVDS_CODEC |
| tristate "Transparent LVDS encoders and decoders support" |
| depends on OF |
| select DRM_KMS_HELPER |
| select DRM_PANEL_BRIDGE |
| help |
| Support for transparent LVDS encoders and decoders that don't |
| require any configuration. |
| |
| config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW |
| tristate "MegaChips stdp4028-ge-b850v3-fw and stdp2690-ge-b850v3-fw" |
| depends on OF |
| select DRM_KMS_HELPER |
| select DRM_PANEL |
| help |
| This is a driver for the display bridges of |
| GE B850v3 that convert dual channel LVDS |
| to DP++. This is used with the i.MX6 imx-ldb |
| driver. You are likely to say N here. |
| |
| config DRM_NWL_MIPI_DSI |
| tristate "Northwest Logic MIPI DSI Host controller" |
| depends on DRM |
| depends on COMMON_CLK |
| depends on OF && HAS_IOMEM |
| select DRM_KMS_HELPER |
| select DRM_MIPI_DSI |
| select DRM_PANEL_BRIDGE |
| select GENERIC_PHY_MIPI_DPHY |
| select MFD_SYSCON |
| select MULTIPLEXER |
| select REGMAP_MMIO |
| help |
| This enables the Northwest Logic MIPI DSI Host controller as |
| for example found on NXP's i.MX8 Processors. |
| |
| config DRM_NXP_PTN3460 |
| tristate "NXP PTN3460 DP/LVDS bridge" |
| depends on OF |
| select DRM_KMS_HELPER |
| select DRM_PANEL |
| help |
| NXP PTN3460 eDP-LVDS bridge chip driver. |
| |
| config DRM_PARADE_PS8622 |
| tristate "Parade eDP/LVDS bridge" |
| depends on OF |
| select DRM_PANEL |
| select DRM_KMS_HELPER |
| select BACKLIGHT_CLASS_DEVICE |
| help |
| Parade eDP-LVDS bridge chip driver. |
| |
| config DRM_PARADE_PS8640 |
| tristate "Parade PS8640 MIPI DSI to eDP Converter" |
| depends on OF |
| select DRM_DISPLAY_DP_HELPER |
| select DRM_DISPLAY_HELPER |
| select DRM_DP_AUX_BUS |
| select DRM_KMS_HELPER |
| select DRM_MIPI_DSI |
| select DRM_PANEL |
| help |
| Choose this option if you have PS8640 for display |
| The PS8640 is a high-performance and low-power |
| MIPI DSI to eDP converter |
| |
| config DRM_SIL_SII8620 |
| tristate "Silicon Image SII8620 HDMI/MHL bridge" |
| depends on OF |
| select DRM_KMS_HELPER |
| select EXTCON |
| depends on RC_CORE || !RC_CORE |
| help |
| Silicon Image SII8620 HDMI/MHL bridge chip driver. |
| |
| config DRM_SII902X |
| tristate "Silicon Image sii902x RGB/HDMI bridge" |
| depends on OF |
| select DRM_KMS_HELPER |
| select REGMAP_I2C |
| select I2C_MUX |
| select SND_SOC_HDMI_CODEC if SND_SOC |
| help |
| Silicon Image sii902x bridge chip driver. |
| |
| config DRM_SII9234 |
| tristate "Silicon Image SII9234 HDMI/MHL bridge" |
| depends on OF |
| help |
| Say Y here if you want support for the MHL interface. |
| It is an I2C driver, that detects connection of MHL bridge |
| and starts encapsulation of HDMI signal. |
| |
| config DRM_SIMPLE_BRIDGE |
| tristate "Simple DRM bridge support" |
| depends on OF |
| select DRM_KMS_HELPER |
| help |
| Support for non-programmable DRM bridges, such as ADI ADV7123, TI |
| THS8134 and THS8135 or passive resistor ladder DACs. |
| |
| config DRM_THINE_THC63LVD1024 |
| tristate "Thine THC63LVD1024 LVDS decoder bridge" |
| depends on OF |
| help |
| Thine THC63LVD1024 LVDS/parallel converter driver. |
| |
| config DRM_TOSHIBA_TC358762 |
| tristate "TC358762 DSI/DPI bridge" |
| depends on OF |
| select DRM_MIPI_DSI |
| select DRM_KMS_HELPER |
| select DRM_PANEL_BRIDGE |
| help |
| Toshiba TC358762 DSI/DPI bridge driver. |
| |
| config DRM_TOSHIBA_TC358764 |
| tristate "TC358764 DSI/LVDS bridge" |
| depends on OF |
| select DRM_MIPI_DSI |
| select DRM_KMS_HELPER |
| select DRM_PANEL |
| help |
| Toshiba TC358764 DSI/LVDS bridge driver. |
| |
| config DRM_TOSHIBA_TC358767 |
| tristate "Toshiba TC358767 eDP bridge" |
| depends on OF |
| select DRM_DISPLAY_DP_HELPER |
| select DRM_DISPLAY_HELPER |
| select DRM_KMS_HELPER |
| select REGMAP_I2C |
| select DRM_MIPI_DSI |
| select DRM_PANEL |
| help |
| Toshiba TC358767 eDP bridge chip driver. |
| |
| config DRM_TOSHIBA_TC358768 |
| tristate "Toshiba TC358768 MIPI DSI bridge" |
| depends on OF |
| select DRM_KMS_HELPER |
| select REGMAP_I2C |
| select DRM_PANEL |
| select DRM_MIPI_DSI |
| help |
| Toshiba TC358768AXBG/TC358778XBG DSI bridge chip driver. |
| |
| config DRM_TOSHIBA_TC358775 |
| tristate "Toshiba TC358775 DSI/LVDS bridge" |
| depends on OF |
| select DRM_DISPLAY_DP_HELPER |
| select DRM_DISPLAY_HELPER |
| select DRM_KMS_HELPER |
| select REGMAP_I2C |
| select DRM_PANEL |
| select DRM_MIPI_DSI |
| help |
| Toshiba TC358775 DSI/LVDS bridge chip driver. |
| |
| config DRM_TI_DLPC3433 |
| tristate "TI DLPC3433 Display controller" |
| depends on DRM && DRM_PANEL |
| depends on OF |
| select DRM_MIPI_DSI |
| help |
| TI DLPC3433 is a MIPI DSI based display controller bridge |
| for processing high resolution DMD based projectors. |
| |
| It has a flexible configuration of MIPI DSI and DPI signal |
| input that produces a DMD output in RGB565, RGB666, RGB888 |
| formats. |
| |
| It supports upto 720p resolution with 60 and 120 Hz refresh |
| rates. |
| |
| config DRM_TI_TFP410 |
| tristate "TI TFP410 DVI/HDMI bridge" |
| depends on OF |
| select DRM_KMS_HELPER |
| help |
| Texas Instruments TFP410 DVI/HDMI Transmitter driver |
| |
| config DRM_TI_SN65DSI83 |
| tristate "TI SN65DSI83 and SN65DSI84 DSI to LVDS bridge" |
| depends on OF |
| select DRM_KMS_HELPER |
| select REGMAP_I2C |
| select DRM_PANEL |
| select DRM_MIPI_DSI |
| help |
| Texas Instruments SN65DSI83 and SN65DSI84 DSI to LVDS Bridge driver |
| |
| config DRM_TI_SN65DSI86 |
| tristate "TI SN65DSI86 DSI to eDP bridge" |
| depends on OF |
| select DRM_DISPLAY_DP_HELPER |
| select DRM_DISPLAY_HELPER |
| select DRM_KMS_HELPER |
| select REGMAP_I2C |
| select DRM_PANEL |
| select DRM_MIPI_DSI |
| select AUXILIARY_BUS |
| select DRM_DP_AUX_BUS |
| help |
| Texas Instruments SN65DSI86 DSI to eDP Bridge driver |
| |
| config DRM_TI_TPD12S015 |
| tristate "TI TPD12S015 HDMI level shifter and ESD protection" |
| depends on OF |
| select DRM_KMS_HELPER |
| help |
| Texas Instruments TPD12S015 HDMI level shifter and ESD protection |
| driver. |
| |
| source "drivers/gpu/drm/bridge/analogix/Kconfig" |
| |
| source "drivers/gpu/drm/bridge/adv7511/Kconfig" |
| |
| source "drivers/gpu/drm/bridge/cadence/Kconfig" |
| |
| source "drivers/gpu/drm/bridge/imx/Kconfig" |
| |
| source "drivers/gpu/drm/bridge/synopsys/Kconfig" |
| |
| endmenu |