| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Pinctrl driver for Rockchip RK805 PMIC |
| * |
| * Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd |
| * |
| * Author: Joseph Chen <chenjh@rock-chips.com> |
| * |
| * Based on the pinctrl-as3722 driver |
| */ |
| |
| #include <linux/gpio/driver.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mfd/rk808.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm.h> |
| #include <linux/property.h> |
| #include <linux/slab.h> |
| |
| #include <linux/pinctrl/consumer.h> |
| #include <linux/pinctrl/machine.h> |
| #include <linux/pinctrl/pinctrl.h> |
| #include <linux/pinctrl/pinconf-generic.h> |
| #include <linux/pinctrl/pinconf.h> |
| #include <linux/pinctrl/pinmux.h> |
| |
| #include "core.h" |
| #include "pinconf.h" |
| #include "pinctrl-utils.h" |
| |
| struct rk805_pin_function { |
| const char *name; |
| const char *const *groups; |
| unsigned int ngroups; |
| int mux_option; |
| }; |
| |
| struct rk805_pin_group { |
| const char *name; |
| const unsigned int pins[1]; |
| unsigned int npins; |
| }; |
| |
| /* |
| * @reg: gpio setting register; |
| * @fun_mask: functions select mask value, when set is gpio; |
| * @dir_mask: input or output mask value, when set is output, otherwise input; |
| * @val_mask: gpio set value, when set is level high, otherwise low; |
| * |
| * Different PMIC has different pin features, belowing 3 mask members are not |
| * all necessary for every PMIC. For example, RK805 has 2 pins that can be used |
| * as output only GPIOs, so func_mask and dir_mask are not needed. RK816 has 1 |
| * pin that can be used as TS/GPIO, so fun_mask, dir_mask and val_mask are all |
| * necessary. |
| */ |
| struct rk805_pin_config { |
| u8 reg; |
| u8 fun_msk; |
| u8 dir_msk; |
| u8 val_msk; |
| }; |
| |
| struct rk805_pctrl_info { |
| struct rk808 *rk808; |
| struct device *dev; |
| struct pinctrl_dev *pctl; |
| struct gpio_chip gpio_chip; |
| struct pinctrl_desc pinctrl_desc; |
| const struct rk805_pin_function *functions; |
| unsigned int num_functions; |
| const struct rk805_pin_group *groups; |
| int num_pin_groups; |
| const struct pinctrl_pin_desc *pins; |
| unsigned int num_pins; |
| const struct rk805_pin_config *pin_cfg; |
| }; |
| |
| enum rk805_pinmux_option { |
| RK805_PINMUX_GPIO, |
| }; |
| |
| enum { |
| RK805_GPIO0, |
| RK805_GPIO1, |
| }; |
| |
| static const char *const rk805_gpio_groups[] = { |
| "gpio0", |
| "gpio1", |
| }; |
| |
| /* RK805: 2 output only GPIOs */ |
| static const struct pinctrl_pin_desc rk805_pins_desc[] = { |
| PINCTRL_PIN(RK805_GPIO0, "gpio0"), |
| PINCTRL_PIN(RK805_GPIO1, "gpio1"), |
| }; |
| |
| static const struct rk805_pin_function rk805_pin_functions[] = { |
| { |
| .name = "gpio", |
| .groups = rk805_gpio_groups, |
| .ngroups = ARRAY_SIZE(rk805_gpio_groups), |
| .mux_option = RK805_PINMUX_GPIO, |
| }, |
| }; |
| |
| static const struct rk805_pin_group rk805_pin_groups[] = { |
| { |
| .name = "gpio0", |
| .pins = { RK805_GPIO0 }, |
| .npins = 1, |
| }, |
| { |
| .name = "gpio1", |
| .pins = { RK805_GPIO1 }, |
| .npins = 1, |
| }, |
| }; |
| |
| #define RK805_GPIO0_VAL_MSK BIT(0) |
| #define RK805_GPIO1_VAL_MSK BIT(1) |
| |
| static const struct rk805_pin_config rk805_gpio_cfgs[] = { |
| { |
| .reg = RK805_OUT_REG, |
| .val_msk = RK805_GPIO0_VAL_MSK, |
| }, |
| { |
| .reg = RK805_OUT_REG, |
| .val_msk = RK805_GPIO1_VAL_MSK, |
| }, |
| }; |
| |
| /* generic gpio chip */ |
| static int rk805_gpio_get(struct gpio_chip *chip, unsigned int offset) |
| { |
| struct rk805_pctrl_info *pci = gpiochip_get_data(chip); |
| int ret, val; |
| |
| ret = regmap_read(pci->rk808->regmap, pci->pin_cfg[offset].reg, &val); |
| if (ret) { |
| dev_err(pci->dev, "get gpio%d value failed\n", offset); |
| return ret; |
| } |
| |
| return !!(val & pci->pin_cfg[offset].val_msk); |
| } |
| |
| static void rk805_gpio_set(struct gpio_chip *chip, |
| unsigned int offset, |
| int value) |
| { |
| struct rk805_pctrl_info *pci = gpiochip_get_data(chip); |
| int ret; |
| |
| ret = regmap_update_bits(pci->rk808->regmap, |
| pci->pin_cfg[offset].reg, |
| pci->pin_cfg[offset].val_msk, |
| value ? pci->pin_cfg[offset].val_msk : 0); |
| if (ret) |
| dev_err(pci->dev, "set gpio%d value %d failed\n", |
| offset, value); |
| } |
| |
| static int rk805_gpio_direction_input(struct gpio_chip *chip, |
| unsigned int offset) |
| { |
| return pinctrl_gpio_direction_input(chip->base + offset); |
| } |
| |
| static int rk805_gpio_direction_output(struct gpio_chip *chip, |
| unsigned int offset, int value) |
| { |
| rk805_gpio_set(chip, offset, value); |
| return pinctrl_gpio_direction_output(chip->base + offset); |
| } |
| |
| static int rk805_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) |
| { |
| struct rk805_pctrl_info *pci = gpiochip_get_data(chip); |
| unsigned int val; |
| int ret; |
| |
| /* default output*/ |
| if (!pci->pin_cfg[offset].dir_msk) |
| return GPIO_LINE_DIRECTION_OUT; |
| |
| ret = regmap_read(pci->rk808->regmap, |
| pci->pin_cfg[offset].reg, |
| &val); |
| if (ret) { |
| dev_err(pci->dev, "get gpio%d direction failed\n", offset); |
| return ret; |
| } |
| |
| if (val & pci->pin_cfg[offset].dir_msk) |
| return GPIO_LINE_DIRECTION_OUT; |
| |
| return GPIO_LINE_DIRECTION_IN; |
| } |
| |
| static const struct gpio_chip rk805_gpio_chip = { |
| .label = "rk805-gpio", |
| .request = gpiochip_generic_request, |
| .free = gpiochip_generic_free, |
| .get_direction = rk805_gpio_get_direction, |
| .get = rk805_gpio_get, |
| .set = rk805_gpio_set, |
| .direction_input = rk805_gpio_direction_input, |
| .direction_output = rk805_gpio_direction_output, |
| .can_sleep = true, |
| .base = -1, |
| .owner = THIS_MODULE, |
| }; |
| |
| /* generic pinctrl */ |
| static int rk805_pinctrl_get_groups_count(struct pinctrl_dev *pctldev) |
| { |
| struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev); |
| |
| return pci->num_pin_groups; |
| } |
| |
| static const char *rk805_pinctrl_get_group_name(struct pinctrl_dev *pctldev, |
| unsigned int group) |
| { |
| struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev); |
| |
| return pci->groups[group].name; |
| } |
| |
| static int rk805_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, |
| unsigned int group, |
| const unsigned int **pins, |
| unsigned int *num_pins) |
| { |
| struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev); |
| |
| *pins = pci->groups[group].pins; |
| *num_pins = pci->groups[group].npins; |
| |
| return 0; |
| } |
| |
| static const struct pinctrl_ops rk805_pinctrl_ops = { |
| .get_groups_count = rk805_pinctrl_get_groups_count, |
| .get_group_name = rk805_pinctrl_get_group_name, |
| .get_group_pins = rk805_pinctrl_get_group_pins, |
| .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, |
| .dt_free_map = pinctrl_utils_free_map, |
| }; |
| |
| static int rk805_pinctrl_get_funcs_count(struct pinctrl_dev *pctldev) |
| { |
| struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev); |
| |
| return pci->num_functions; |
| } |
| |
| static const char *rk805_pinctrl_get_func_name(struct pinctrl_dev *pctldev, |
| unsigned int function) |
| { |
| struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev); |
| |
| return pci->functions[function].name; |
| } |
| |
| static int rk805_pinctrl_get_func_groups(struct pinctrl_dev *pctldev, |
| unsigned int function, |
| const char *const **groups, |
| unsigned int *const num_groups) |
| { |
| struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev); |
| |
| *groups = pci->functions[function].groups; |
| *num_groups = pci->functions[function].ngroups; |
| |
| return 0; |
| } |
| |
| static int _rk805_pinctrl_set_mux(struct pinctrl_dev *pctldev, |
| unsigned int offset, |
| int mux) |
| { |
| struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev); |
| int ret; |
| |
| if (!pci->pin_cfg[offset].fun_msk) |
| return 0; |
| |
| if (mux == RK805_PINMUX_GPIO) { |
| ret = regmap_update_bits(pci->rk808->regmap, |
| pci->pin_cfg[offset].reg, |
| pci->pin_cfg[offset].fun_msk, |
| pci->pin_cfg[offset].fun_msk); |
| if (ret) { |
| dev_err(pci->dev, "set gpio%d GPIO failed\n", offset); |
| return ret; |
| } |
| } else { |
| dev_err(pci->dev, "Couldn't find function mux %d\n", mux); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int rk805_pinctrl_set_mux(struct pinctrl_dev *pctldev, |
| unsigned int function, |
| unsigned int group) |
| { |
| struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev); |
| int mux = pci->functions[function].mux_option; |
| int offset = group; |
| |
| return _rk805_pinctrl_set_mux(pctldev, offset, mux); |
| } |
| |
| static int rk805_pmx_gpio_set_direction(struct pinctrl_dev *pctldev, |
| struct pinctrl_gpio_range *range, |
| unsigned int offset, bool input) |
| { |
| struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev); |
| int ret; |
| |
| /* switch to gpio function */ |
| ret = _rk805_pinctrl_set_mux(pctldev, offset, RK805_PINMUX_GPIO); |
| if (ret) { |
| dev_err(pci->dev, "set gpio%d mux failed\n", offset); |
| return ret; |
| } |
| |
| /* set direction */ |
| if (!pci->pin_cfg[offset].dir_msk) |
| return 0; |
| |
| ret = regmap_update_bits(pci->rk808->regmap, |
| pci->pin_cfg[offset].reg, |
| pci->pin_cfg[offset].dir_msk, |
| input ? 0 : pci->pin_cfg[offset].dir_msk); |
| if (ret) { |
| dev_err(pci->dev, "set gpio%d direction failed\n", offset); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static const struct pinmux_ops rk805_pinmux_ops = { |
| .get_functions_count = rk805_pinctrl_get_funcs_count, |
| .get_function_name = rk805_pinctrl_get_func_name, |
| .get_function_groups = rk805_pinctrl_get_func_groups, |
| .set_mux = rk805_pinctrl_set_mux, |
| .gpio_set_direction = rk805_pmx_gpio_set_direction, |
| }; |
| |
| static int rk805_pinconf_get(struct pinctrl_dev *pctldev, |
| unsigned int pin, unsigned long *config) |
| { |
| struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev); |
| enum pin_config_param param = pinconf_to_config_param(*config); |
| u32 arg = 0; |
| |
| switch (param) { |
| case PIN_CONFIG_OUTPUT: |
| arg = rk805_gpio_get(&pci->gpio_chip, pin); |
| break; |
| default: |
| dev_err(pci->dev, "Properties not supported\n"); |
| return -ENOTSUPP; |
| } |
| |
| *config = pinconf_to_config_packed(param, (u16)arg); |
| |
| return 0; |
| } |
| |
| static int rk805_pinconf_set(struct pinctrl_dev *pctldev, |
| unsigned int pin, unsigned long *configs, |
| unsigned int num_configs) |
| { |
| struct rk805_pctrl_info *pci = pinctrl_dev_get_drvdata(pctldev); |
| enum pin_config_param param; |
| u32 i, arg = 0; |
| |
| for (i = 0; i < num_configs; i++) { |
| param = pinconf_to_config_param(configs[i]); |
| arg = pinconf_to_config_argument(configs[i]); |
| |
| switch (param) { |
| case PIN_CONFIG_OUTPUT: |
| rk805_gpio_set(&pci->gpio_chip, pin, arg); |
| rk805_pmx_gpio_set_direction(pctldev, NULL, pin, false); |
| break; |
| default: |
| dev_err(pci->dev, "Properties not supported\n"); |
| return -ENOTSUPP; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static const struct pinconf_ops rk805_pinconf_ops = { |
| .pin_config_get = rk805_pinconf_get, |
| .pin_config_set = rk805_pinconf_set, |
| }; |
| |
| static const struct pinctrl_desc rk805_pinctrl_desc = { |
| .name = "rk805-pinctrl", |
| .pctlops = &rk805_pinctrl_ops, |
| .pmxops = &rk805_pinmux_ops, |
| .confops = &rk805_pinconf_ops, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int rk805_pinctrl_probe(struct platform_device *pdev) |
| { |
| struct rk805_pctrl_info *pci; |
| int ret; |
| |
| device_set_node(&pdev->dev, dev_fwnode(pdev->dev.parent)); |
| |
| pci = devm_kzalloc(&pdev->dev, sizeof(*pci), GFP_KERNEL); |
| if (!pci) |
| return -ENOMEM; |
| |
| pci->dev = &pdev->dev; |
| pci->rk808 = dev_get_drvdata(pdev->dev.parent); |
| |
| pci->pinctrl_desc = rk805_pinctrl_desc; |
| pci->gpio_chip = rk805_gpio_chip; |
| pci->gpio_chip.parent = &pdev->dev; |
| |
| platform_set_drvdata(pdev, pci); |
| |
| switch (pci->rk808->variant) { |
| case RK805_ID: |
| pci->pins = rk805_pins_desc; |
| pci->num_pins = ARRAY_SIZE(rk805_pins_desc); |
| pci->functions = rk805_pin_functions; |
| pci->num_functions = ARRAY_SIZE(rk805_pin_functions); |
| pci->groups = rk805_pin_groups; |
| pci->num_pin_groups = ARRAY_SIZE(rk805_pin_groups); |
| pci->pinctrl_desc.pins = rk805_pins_desc; |
| pci->pinctrl_desc.npins = ARRAY_SIZE(rk805_pins_desc); |
| pci->pin_cfg = rk805_gpio_cfgs; |
| pci->gpio_chip.ngpio = ARRAY_SIZE(rk805_gpio_cfgs); |
| break; |
| default: |
| dev_err(&pdev->dev, "unsupported RK805 ID %lu\n", |
| pci->rk808->variant); |
| return -EINVAL; |
| } |
| |
| /* Add gpio chip */ |
| ret = devm_gpiochip_add_data(&pdev->dev, &pci->gpio_chip, pci); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Couldn't add gpiochip\n"); |
| return ret; |
| } |
| |
| /* Add pinctrl */ |
| pci->pctl = devm_pinctrl_register(&pdev->dev, &pci->pinctrl_desc, pci); |
| if (IS_ERR(pci->pctl)) { |
| dev_err(&pdev->dev, "Couldn't add pinctrl\n"); |
| return PTR_ERR(pci->pctl); |
| } |
| |
| /* Add pin range */ |
| ret = gpiochip_add_pin_range(&pci->gpio_chip, dev_name(&pdev->dev), |
| 0, 0, pci->gpio_chip.ngpio); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Couldn't add gpiochip pin range\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_driver rk805_pinctrl_driver = { |
| .probe = rk805_pinctrl_probe, |
| .driver = { |
| .name = "rk805-pinctrl", |
| }, |
| }; |
| module_platform_driver(rk805_pinctrl_driver); |
| |
| MODULE_DESCRIPTION("RK805 pin control and GPIO driver"); |
| MODULE_AUTHOR("Joseph Chen <chenjh@rock-chips.com>"); |
| MODULE_LICENSE("GPL v2"); |