| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Synopsys G210 Test Chip driver |
| * |
| * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) |
| * |
| * Authors: Joao Pinto <jpinto@synopsys.com> |
| */ |
| |
| #include <linux/module.h> |
| |
| #include <ufs/ufshcd.h> |
| #include <ufs/unipro.h> |
| |
| #include "ufshcd-dwc.h" |
| #include "ufshci-dwc.h" |
| #include "tc-dwc-g210.h" |
| |
| /** |
| * tc_dwc_g210_setup_40bit_rmmi() |
| * This function configures Synopsys TC specific atributes (40-bit RMMI) |
| * @hba: Pointer to drivers structure |
| * |
| * Returns 0 on success or non-zero value on failure |
| */ |
| static int tc_dwc_g210_setup_40bit_rmmi(struct ufs_hba *hba) |
| { |
| static const struct ufshcd_dme_attr_val setup_attrs[] = { |
| { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, |
| { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, |
| { UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL }, |
| { UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL }, |
| { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, |
| { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, |
| { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN0_TX), 0x01, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN0_TX), 0x19, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN0_TX), 0x14, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN0_RX), 0x01, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN0_RX), 0x19, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN0_RX), 4, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80, |
| DME_LOCAL }, |
| { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, |
| { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN0_RX), 0x03, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN0_RX), 0x16, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN0_RX), 0x42, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN0_RX), 0xa4, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN0_RX), 0x01, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN0_RX), 0x01, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN0_RX), 0x28, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN0_RX), 0x1E, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f, |
| DME_LOCAL }, |
| { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, |
| }; |
| |
| return ufshcd_dwc_dme_set_attrs(hba, setup_attrs, |
| ARRAY_SIZE(setup_attrs)); |
| } |
| |
| /** |
| * tc_dwc_g210_setup_20bit_rmmi_lane0() |
| * This function configures Synopsys TC 20-bit RMMI Lane 0 |
| * @hba: Pointer to drivers structure |
| * |
| * Returns 0 on success or non-zero value on failure |
| */ |
| static int tc_dwc_g210_setup_20bit_rmmi_lane0(struct ufs_hba *hba) |
| { |
| static const struct ufshcd_dme_attr_val setup_attrs[] = { |
| { UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN0_TX), 0x01, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN0_TX), 0x19, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN0_RX), 0x19, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN0_TX), 0x12, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN0_RX), 0x01, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN0_RX), 2, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80, |
| DME_LOCAL }, |
| { UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL }, |
| { UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN0_RX), 0x03, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN0_RX), 0x16, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN0_RX), 0x42, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN0_RX), 0xa4, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN0_RX), 0x01, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN0_RX), 0x01, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN0_RX), 0x28, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN0_RX), 0x1E, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f, |
| DME_LOCAL }, |
| { UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL }, |
| }; |
| |
| return ufshcd_dwc_dme_set_attrs(hba, setup_attrs, |
| ARRAY_SIZE(setup_attrs)); |
| } |
| |
| /** |
| * tc_dwc_g210_setup_20bit_rmmi_lane1() |
| * This function configures Synopsys TC 20-bit RMMI Lane 1 |
| * @hba: Pointer to drivers structure |
| * |
| * Returns 0 on success or non-zero value on failure |
| */ |
| static int tc_dwc_g210_setup_20bit_rmmi_lane1(struct ufs_hba *hba) |
| { |
| int connected_rx_lanes = 0; |
| int connected_tx_lanes = 0; |
| int ret = 0; |
| |
| static const struct ufshcd_dme_attr_val setup_tx_attrs[] = { |
| { UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN1_TX), 0x0d, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN1_TX), 0x19, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN1_TX), 0x12, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6, |
| DME_LOCAL }, |
| }; |
| |
| static const struct ufshcd_dme_attr_val setup_rx_attrs[] = { |
| { UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN1_RX), 0x01, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN1_RX), 0x19, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN1_RX), 2, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN1_RX), 0x80, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN1_RX), 0x03, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN1_RX), 0x16, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN1_RX), 0x42, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN1_RX), 0xa4, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN1_RX), 0x01, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN1_RX), 0x01, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN1_RX), 0x28, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN1_RX), 0x1E, |
| DME_LOCAL }, |
| { UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN1_RX), 0x2f, |
| DME_LOCAL }, |
| }; |
| |
| /* Get the available lane count */ |
| ufshcd_dme_get(hba, UIC_ARG_MIB(PA_AVAILRXDATALANES), |
| &connected_rx_lanes); |
| ufshcd_dme_get(hba, UIC_ARG_MIB(PA_AVAILTXDATALANES), |
| &connected_tx_lanes); |
| |
| if (connected_tx_lanes == 2) { |
| |
| ret = ufshcd_dwc_dme_set_attrs(hba, setup_tx_attrs, |
| ARRAY_SIZE(setup_tx_attrs)); |
| |
| if (ret) |
| goto out; |
| } |
| |
| if (connected_rx_lanes == 2) { |
| ret = ufshcd_dwc_dme_set_attrs(hba, setup_rx_attrs, |
| ARRAY_SIZE(setup_rx_attrs)); |
| } |
| |
| out: |
| return ret; |
| } |
| |
| /** |
| * tc_dwc_g210_setup_20bit_rmmi() |
| * This function configures Synopsys TC specific atributes (20-bit RMMI) |
| * @hba: Pointer to drivers structure |
| * |
| * Returns 0 on success or non-zero value on failure |
| */ |
| static int tc_dwc_g210_setup_20bit_rmmi(struct ufs_hba *hba) |
| { |
| int ret = 0; |
| |
| static const struct ufshcd_dme_attr_val setup_attrs[] = { |
| { UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL }, |
| { UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL }, |
| { UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL }, |
| { UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL }, |
| { UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL }, |
| { UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL }, |
| { UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL }, |
| }; |
| |
| ret = ufshcd_dwc_dme_set_attrs(hba, setup_attrs, |
| ARRAY_SIZE(setup_attrs)); |
| if (ret) |
| goto out; |
| |
| /* Lane 0 configuration*/ |
| ret = tc_dwc_g210_setup_20bit_rmmi_lane0(hba); |
| if (ret) |
| goto out; |
| |
| /* Lane 1 configuration*/ |
| ret = tc_dwc_g210_setup_20bit_rmmi_lane1(hba); |
| if (ret) |
| goto out; |
| |
| out: |
| return ret; |
| } |
| |
| /** |
| * tc_dwc_g210_config_40_bit() |
| * This function configures Local (host) Synopsys 40-bit TC specific attributes |
| * |
| * @hba: Pointer to drivers structure |
| * |
| * Returns 0 on success non-zero value on failure |
| */ |
| int tc_dwc_g210_config_40_bit(struct ufs_hba *hba) |
| { |
| int ret = 0; |
| |
| dev_info(hba->dev, "Configuring Test Chip 40-bit RMMI\n"); |
| ret = tc_dwc_g210_setup_40bit_rmmi(hba); |
| if (ret) { |
| dev_err(hba->dev, "Configuration failed\n"); |
| goto out; |
| } |
| |
| /* To write Shadow register bank to effective configuration block */ |
| ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_MPHYCFGUPDT), 0x01); |
| if (ret) |
| goto out; |
| |
| /* To configure Debug OMC */ |
| ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_DEBUGOMC), 0x01); |
| |
| out: |
| return ret; |
| } |
| EXPORT_SYMBOL(tc_dwc_g210_config_40_bit); |
| |
| /** |
| * tc_dwc_g210_config_20_bit() |
| * This function configures Local (host) Synopsys 20-bit TC specific attributes |
| * |
| * @hba: Pointer to drivers structure |
| * |
| * Returns 0 on success non-zero value on failure |
| */ |
| int tc_dwc_g210_config_20_bit(struct ufs_hba *hba) |
| { |
| int ret = 0; |
| |
| dev_info(hba->dev, "Configuring Test Chip 20-bit RMMI\n"); |
| ret = tc_dwc_g210_setup_20bit_rmmi(hba); |
| if (ret) { |
| dev_err(hba->dev, "Configuration failed\n"); |
| goto out; |
| } |
| |
| /* To write Shadow register bank to effective configuration block */ |
| ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_MPHYCFGUPDT), 0x01); |
| if (ret) |
| goto out; |
| |
| /* To configure Debug OMC */ |
| ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_DEBUGOMC), 0x01); |
| |
| out: |
| return ret; |
| } |
| EXPORT_SYMBOL(tc_dwc_g210_config_20_bit); |
| |
| MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>"); |
| MODULE_DESCRIPTION("Synopsys G210 Test Chip driver"); |
| MODULE_LICENSE("Dual BSD/GPL"); |