| // SPDX-License-Identifier: GPL-2.0 | |
| // Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd. | |
| #include <linux/moduleloader.h> | |
| #include <linux/elf.h> | |
| #include <linux/mm.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/slab.h> | |
| #include <linux/fs.h> | |
| #include <linux/string.h> | |
| #include <linux/kernel.h> | |
| #include <linux/spinlock.h> | |
| #ifdef CONFIG_CPU_CK810 | |
| #define IS_BSR32(hi16, lo16) (((hi16) & 0xFC00) == 0xE000) | |
| #define IS_JSRI32(hi16, lo16) ((hi16) == 0xEAE0) | |
| #define CHANGE_JSRI_TO_LRW(addr) do { \ | |
| *(uint16_t *)(addr) = (*(uint16_t *)(addr) & 0xFF9F) | 0x001a; \ | |
| *((uint16_t *)(addr) + 1) = *((uint16_t *)(addr) + 1) & 0xFFFF; \ | |
| } while (0) | |
| #define SET_JSR32_R26(addr) do { \ | |
| *(uint16_t *)(addr) = 0xE8Fa; \ | |
| *((uint16_t *)(addr) + 1) = 0x0000; \ | |
| } while (0) | |
| static void jsri_2_lrw_jsr(uint32_t *location) | |
| { | |
| uint16_t *location_tmp = (uint16_t *)location; | |
| if (IS_BSR32(*location_tmp, *(location_tmp + 1))) | |
| return; | |
| if (IS_JSRI32(*location_tmp, *(location_tmp + 1))) { | |
| /* jsri 0x... --> lrw r26, 0x... */ | |
| CHANGE_JSRI_TO_LRW(location); | |
| /* lsli r0, r0 --> jsr r26 */ | |
| SET_JSR32_R26(location + 1); | |
| } | |
| } | |
| #else | |
| static inline void jsri_2_lrw_jsr(uint32_t *location) | |
| { | |
| return; | |
| } | |
| #endif | |
| int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, | |
| unsigned int symindex, unsigned int relsec, struct module *me) | |
| { | |
| unsigned int i; | |
| Elf32_Rela *rel = (void *) sechdrs[relsec].sh_addr; | |
| Elf32_Sym *sym; | |
| uint32_t *location; | |
| short *temp; | |
| for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { | |
| /* This is where to make the change */ | |
| location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr | |
| + rel[i].r_offset; | |
| sym = (Elf32_Sym *)sechdrs[symindex].sh_addr | |
| + ELF32_R_SYM(rel[i].r_info); | |
| switch (ELF32_R_TYPE(rel[i].r_info)) { | |
| case R_CSKY_32: | |
| /* We add the value into the location given */ | |
| *location = rel[i].r_addend + sym->st_value; | |
| break; | |
| case R_CSKY_PC32: | |
| /* Add the value, subtract its position */ | |
| *location = rel[i].r_addend + sym->st_value | |
| - (uint32_t)location; | |
| break; | |
| case R_CSKY_PCRELJSR_IMM11BY2: | |
| break; | |
| case R_CSKY_PCRELJSR_IMM26BY2: | |
| jsri_2_lrw_jsr(location); | |
| break; | |
| case R_CSKY_ADDR_HI16: | |
| temp = ((short *)location) + 1; | |
| *temp = (short) | |
| ((rel[i].r_addend + sym->st_value) >> 16); | |
| break; | |
| case R_CSKY_ADDR_LO16: | |
| temp = ((short *)location) + 1; | |
| *temp = (short) | |
| ((rel[i].r_addend + sym->st_value) & 0xffff); | |
| break; | |
| default: | |
| pr_err("module %s: Unknown relocation: %u\n", | |
| me->name, ELF32_R_TYPE(rel[i].r_info)); | |
| return -ENOEXEC; | |
| } | |
| } | |
| return 0; | |
| } |