| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Renesas RZ/G2L USBPHY control driver | |
| * | |
| * Copyright (C) 2021 Renesas Electronics Corporation | |
| */ | |
| #include <linux/io.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/regmap.h> | |
| #include <linux/reset.h> | |
| #include <linux/reset-controller.h> | |
| #include <linux/mfd/syscon.h> | |
| #define RESET 0x000 | |
| #define VBENCTL 0x03c | |
| #define RESET_SEL_PLLRESET BIT(12) | |
| #define RESET_PLLRESET BIT(8) | |
| #define RESET_SEL_P2RESET BIT(5) | |
| #define RESET_SEL_P1RESET BIT(4) | |
| #define RESET_PHYRST_2 BIT(1) | |
| #define RESET_PHYRST_1 BIT(0) | |
| #define PHY_RESET_PORT2 (RESET_SEL_P2RESET | RESET_PHYRST_2) | |
| #define PHY_RESET_PORT1 (RESET_SEL_P1RESET | RESET_PHYRST_1) | |
| #define NUM_PORTS 2 | |
| struct rzg2l_usbphy_ctrl_priv { | |
| struct reset_controller_dev rcdev; | |
| struct reset_control *rstc; | |
| void __iomem *base; | |
| struct platform_device *vdev; | |
| struct regmap_field *pwrrdy; | |
| spinlock_t lock; | |
| }; | |
| #define rcdev_to_priv(x) container_of(x, struct rzg2l_usbphy_ctrl_priv, rcdev) | |
| static int rzg2l_usbphy_ctrl_assert(struct reset_controller_dev *rcdev, | |
| unsigned long id) | |
| { | |
| struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev); | |
| u32 port_mask = PHY_RESET_PORT1 | PHY_RESET_PORT2; | |
| void __iomem *base = priv->base; | |
| unsigned long flags; | |
| u32 val; | |
| spin_lock_irqsave(&priv->lock, flags); | |
| val = readl(base + RESET); | |
| val |= id ? PHY_RESET_PORT2 : PHY_RESET_PORT1; | |
| if (port_mask == (val & port_mask)) | |
| val |= RESET_PLLRESET; | |
| writel(val, base + RESET); | |
| spin_unlock_irqrestore(&priv->lock, flags); | |
| return 0; | |
| } | |
| static int rzg2l_usbphy_ctrl_deassert(struct reset_controller_dev *rcdev, | |
| unsigned long id) | |
| { | |
| struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev); | |
| void __iomem *base = priv->base; | |
| unsigned long flags; | |
| u32 val; | |
| spin_lock_irqsave(&priv->lock, flags); | |
| val = readl(base + RESET); | |
| val |= RESET_SEL_PLLRESET; | |
| val &= ~(RESET_PLLRESET | (id ? PHY_RESET_PORT2 : PHY_RESET_PORT1)); | |
| writel(val, base + RESET); | |
| spin_unlock_irqrestore(&priv->lock, flags); | |
| return 0; | |
| } | |
| static int rzg2l_usbphy_ctrl_status(struct reset_controller_dev *rcdev, | |
| unsigned long id) | |
| { | |
| struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev); | |
| u32 port_mask; | |
| port_mask = id ? PHY_RESET_PORT2 : PHY_RESET_PORT1; | |
| return !!(readl(priv->base + RESET) & port_mask); | |
| } | |
| /* put pll and phy into reset state */ | |
| static void rzg2l_usbphy_ctrl_init(struct rzg2l_usbphy_ctrl_priv *priv) | |
| { | |
| unsigned long flags; | |
| u32 val; | |
| spin_lock_irqsave(&priv->lock, flags); | |
| val = readl(priv->base + RESET); | |
| val |= RESET_SEL_PLLRESET | RESET_PLLRESET | PHY_RESET_PORT2 | PHY_RESET_PORT1; | |
| writel(val, priv->base + RESET); | |
| spin_unlock_irqrestore(&priv->lock, flags); | |
| } | |
| #define RZG2L_USBPHY_CTRL_PWRRDY 1 | |
| static const struct of_device_id rzg2l_usbphy_ctrl_match_table[] = { | |
| { .compatible = "renesas,rzg2l-usbphy-ctrl" }, | |
| { | |
| .compatible = "renesas,r9a08g045-usbphy-ctrl", | |
| .data = (void *)RZG2L_USBPHY_CTRL_PWRRDY | |
| }, | |
| { /* Sentinel */ } | |
| }; | |
| MODULE_DEVICE_TABLE(of, rzg2l_usbphy_ctrl_match_table); | |
| static const struct reset_control_ops rzg2l_usbphy_ctrl_reset_ops = { | |
| .assert = rzg2l_usbphy_ctrl_assert, | |
| .deassert = rzg2l_usbphy_ctrl_deassert, | |
| .status = rzg2l_usbphy_ctrl_status, | |
| }; | |
| static const struct regmap_config rzg2l_usb_regconf = { | |
| .reg_bits = 32, | |
| .val_bits = 32, | |
| .reg_stride = 4, | |
| .max_register = 1, | |
| }; | |
| static int rzg2l_usbphy_ctrl_set_pwrrdy(struct regmap_field *pwrrdy, | |
| bool power_on) | |
| { | |
| u32 val = power_on ? 0 : 1; | |
| if (!pwrrdy) | |
| return 0; | |
| /* The initialization path guarantees that the mask is 1 bit long. */ | |
| return regmap_field_update_bits(pwrrdy, 1, val); | |
| } | |
| static void rzg2l_usbphy_ctrl_pwrrdy_off(void *data) | |
| { | |
| rzg2l_usbphy_ctrl_set_pwrrdy(data, false); | |
| } | |
| static int rzg2l_usbphy_ctrl_pwrrdy_init(struct device *dev, | |
| struct rzg2l_usbphy_ctrl_priv *priv) | |
| { | |
| struct reg_field field; | |
| struct regmap *regmap; | |
| const int *data; | |
| u32 args[2]; | |
| int ret; | |
| data = device_get_match_data(dev); | |
| if ((uintptr_t)data != RZG2L_USBPHY_CTRL_PWRRDY) | |
| return 0; | |
| regmap = syscon_regmap_lookup_by_phandle_args(dev->of_node, | |
| "renesas,sysc-pwrrdy", | |
| ARRAY_SIZE(args), args); | |
| if (IS_ERR(regmap)) | |
| return PTR_ERR(regmap); | |
| /* Don't allow more than one bit in mask. */ | |
| if (hweight32(args[1]) != 1) | |
| return -EINVAL; | |
| field.reg = args[0]; | |
| field.lsb = __ffs(args[1]); | |
| field.msb = __fls(args[1]); | |
| priv->pwrrdy = devm_regmap_field_alloc(dev, regmap, field); | |
| if (IS_ERR(priv->pwrrdy)) | |
| return PTR_ERR(priv->pwrrdy); | |
| ret = rzg2l_usbphy_ctrl_set_pwrrdy(priv->pwrrdy, true); | |
| if (ret) | |
| return ret; | |
| return devm_add_action_or_reset(dev, rzg2l_usbphy_ctrl_pwrrdy_off, priv->pwrrdy); | |
| } | |
| static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct rzg2l_usbphy_ctrl_priv *priv; | |
| struct platform_device *vdev; | |
| struct regmap *regmap; | |
| int error; | |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| priv->base = devm_platform_ioremap_resource(pdev, 0); | |
| if (IS_ERR(priv->base)) | |
| return PTR_ERR(priv->base); | |
| regmap = devm_regmap_init_mmio(dev, priv->base + VBENCTL, &rzg2l_usb_regconf); | |
| if (IS_ERR(regmap)) | |
| return PTR_ERR(regmap); | |
| error = rzg2l_usbphy_ctrl_pwrrdy_init(dev, priv); | |
| if (error) | |
| return error; | |
| priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); | |
| if (IS_ERR(priv->rstc)) | |
| return dev_err_probe(dev, PTR_ERR(priv->rstc), | |
| "failed to get reset\n"); | |
| error = reset_control_deassert(priv->rstc); | |
| if (error) | |
| return error; | |
| spin_lock_init(&priv->lock); | |
| dev_set_drvdata(dev, priv); | |
| pm_runtime_enable(&pdev->dev); | |
| error = pm_runtime_resume_and_get(&pdev->dev); | |
| if (error < 0) { | |
| dev_err_probe(&pdev->dev, error, "pm_runtime_resume_and_get failed"); | |
| goto err_pm_disable_reset_deassert; | |
| } | |
| rzg2l_usbphy_ctrl_init(priv); | |
| priv->rcdev.ops = &rzg2l_usbphy_ctrl_reset_ops; | |
| priv->rcdev.of_reset_n_cells = 1; | |
| priv->rcdev.nr_resets = NUM_PORTS; | |
| priv->rcdev.of_node = dev->of_node; | |
| priv->rcdev.dev = dev; | |
| error = devm_reset_controller_register(dev, &priv->rcdev); | |
| if (error) | |
| goto err_pm_runtime_put; | |
| vdev = platform_device_alloc("rzg2l-usb-vbus-regulator", pdev->id); | |
| if (!vdev) { | |
| error = -ENOMEM; | |
| goto err_pm_runtime_put; | |
| } | |
| vdev->dev.parent = dev; | |
| priv->vdev = vdev; | |
| device_set_of_node_from_dev(&vdev->dev, dev); | |
| error = platform_device_add(vdev); | |
| if (error) | |
| goto err_device_put; | |
| return 0; | |
| err_device_put: | |
| platform_device_put(vdev); | |
| err_pm_runtime_put: | |
| pm_runtime_put(&pdev->dev); | |
| err_pm_disable_reset_deassert: | |
| pm_runtime_disable(&pdev->dev); | |
| reset_control_assert(priv->rstc); | |
| return error; | |
| } | |
| static void rzg2l_usbphy_ctrl_remove(struct platform_device *pdev) | |
| { | |
| struct rzg2l_usbphy_ctrl_priv *priv = dev_get_drvdata(&pdev->dev); | |
| platform_device_unregister(priv->vdev); | |
| pm_runtime_put(&pdev->dev); | |
| pm_runtime_disable(&pdev->dev); | |
| reset_control_assert(priv->rstc); | |
| } | |
| static int rzg2l_usbphy_ctrl_suspend(struct device *dev) | |
| { | |
| struct rzg2l_usbphy_ctrl_priv *priv = dev_get_drvdata(dev); | |
| u32 val; | |
| int ret; | |
| val = readl(priv->base + RESET); | |
| if (!(val & PHY_RESET_PORT2) || !(val & PHY_RESET_PORT1)) | |
| WARN(1, "Suspend with resets de-asserted\n"); | |
| pm_runtime_put_sync(dev); | |
| ret = reset_control_assert(priv->rstc); | |
| if (ret) | |
| goto rpm_resume; | |
| ret = rzg2l_usbphy_ctrl_set_pwrrdy(priv->pwrrdy, false); | |
| if (ret) | |
| goto reset_deassert; | |
| return 0; | |
| reset_deassert: | |
| reset_control_deassert(priv->rstc); | |
| rpm_resume: | |
| pm_runtime_resume_and_get(dev); | |
| return ret; | |
| } | |
| static int rzg2l_usbphy_ctrl_resume(struct device *dev) | |
| { | |
| struct rzg2l_usbphy_ctrl_priv *priv = dev_get_drvdata(dev); | |
| int ret; | |
| ret = rzg2l_usbphy_ctrl_set_pwrrdy(priv->pwrrdy, true); | |
| if (ret) | |
| return ret; | |
| ret = reset_control_deassert(priv->rstc); | |
| if (ret) | |
| goto pwrrdy_off; | |
| ret = pm_runtime_resume_and_get(dev); | |
| if (ret) | |
| goto reset_assert; | |
| rzg2l_usbphy_ctrl_init(priv); | |
| return 0; | |
| reset_assert: | |
| reset_control_assert(priv->rstc); | |
| pwrrdy_off: | |
| rzg2l_usbphy_ctrl_set_pwrrdy(priv->pwrrdy, false); | |
| return ret; | |
| } | |
| static DEFINE_SIMPLE_DEV_PM_OPS(rzg2l_usbphy_ctrl_pm_ops, | |
| rzg2l_usbphy_ctrl_suspend, | |
| rzg2l_usbphy_ctrl_resume); | |
| static struct platform_driver rzg2l_usbphy_ctrl_driver = { | |
| .driver = { | |
| .name = "rzg2l_usbphy_ctrl", | |
| .of_match_table = rzg2l_usbphy_ctrl_match_table, | |
| .pm = pm_ptr(&rzg2l_usbphy_ctrl_pm_ops), | |
| }, | |
| .probe = rzg2l_usbphy_ctrl_probe, | |
| .remove = rzg2l_usbphy_ctrl_remove, | |
| }; | |
| module_platform_driver(rzg2l_usbphy_ctrl_driver); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_DESCRIPTION("Renesas RZ/G2L USBPHY Control"); | |
| MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>"); |