| // SPDX-License-Identifier: GPL-2.0+ OR MIT |
| /* |
| * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk> |
| */ |
| |
| #include <dt-bindings/clock/marvell,mmp2.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| enable-method = "marvell,mmp3-smp"; |
| |
| cpu@0 { |
| compatible = "marvell,pj4b"; |
| device_type = "cpu"; |
| next-level-cache = <&l2>; |
| reg = <0>; |
| }; |
| |
| cpu@1 { |
| compatible = "marvell,pj4b"; |
| device_type = "cpu"; |
| next-level-cache = <&l2>; |
| reg = <1>; |
| }; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&gic>; |
| ranges; |
| |
| axi@d4200000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xd4200000 0x00200000>; |
| ranges; |
| |
| interrupt-controller@d4282000 { |
| compatible = "marvell,mmp3-intc"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0xd4282000 0x1000>, |
| <0xd4284000 0x100>; |
| mrvl,intc-nr-irqs = <64>; |
| }; |
| |
| pmic_mux: interrupt-controller@d4282150 { |
| compatible = "mrvl,mmp2-mux-intc"; |
| interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x150 0x4>, <0x168 0x4>; |
| reg-names = "mux status", "mux mask"; |
| mrvl,intc-nr-irqs = <4>; |
| }; |
| |
| rtc_mux: interrupt-controller@d4282154 { |
| compatible = "mrvl,mmp2-mux-intc"; |
| interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x154 0x4>, <0x16c 0x4>; |
| reg-names = "mux status", "mux mask"; |
| mrvl,intc-nr-irqs = <2>; |
| }; |
| |
| hsi3_mux: interrupt-controller@d42821bc { |
| compatible = "mrvl,mmp2-mux-intc"; |
| interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x1bc 0x4>, <0x1a4 0x4>; |
| reg-names = "mux status", "mux mask"; |
| mrvl,intc-nr-irqs = <3>; |
| }; |
| |
| gpu_mux: interrupt-controller@d42821c0 { |
| compatible = "mrvl,mmp2-mux-intc"; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x1c0 0x4>, <0x1a8 0x4>; |
| reg-names = "mux status", "mux mask"; |
| mrvl,intc-nr-irqs = <3>; |
| }; |
| |
| twsi_mux: interrupt-controller@d4282158 { |
| compatible = "mrvl,mmp2-mux-intc"; |
| interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x158 0x4>, <0x170 0x4>; |
| reg-names = "mux status", "mux mask"; |
| mrvl,intc-nr-irqs = <5>; |
| }; |
| |
| hsi2_mux: interrupt-controller@d42821c4 { |
| compatible = "mrvl,mmp2-mux-intc"; |
| interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x1c4 0x4>, <0x1ac 0x4>; |
| reg-names = "mux status", "mux mask"; |
| mrvl,intc-nr-irqs = <2>; |
| }; |
| |
| dxo_mux: interrupt-controller@d42821c8 { |
| compatible = "mrvl,mmp2-mux-intc"; |
| interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x1c8 0x4>, <0x1b0 0x4>; |
| reg-names = "mux status", "mux mask"; |
| mrvl,intc-nr-irqs = <2>; |
| }; |
| |
| misc1_mux: interrupt-controller@d428215c { |
| compatible = "mrvl,mmp2-mux-intc"; |
| interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x15c 0x4>, <0x174 0x4>; |
| reg-names = "mux status", "mux mask"; |
| mrvl,intc-nr-irqs = <31>; |
| }; |
| |
| ci_mux: interrupt-controller@d42821cc { |
| compatible = "mrvl,mmp2-mux-intc"; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x1cc 0x4>, <0x1b4 0x4>; |
| reg-names = "mux status", "mux mask"; |
| mrvl,intc-nr-irqs = <2>; |
| }; |
| |
| ssp_mux: interrupt-controller@d4282160 { |
| compatible = "mrvl,mmp2-mux-intc"; |
| interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x160 0x4>, <0x178 0x4>; |
| reg-names = "mux status", "mux mask"; |
| mrvl,intc-nr-irqs = <2>; |
| }; |
| |
| hsi1_mux: interrupt-controller@d4282184 { |
| compatible = "mrvl,mmp2-mux-intc"; |
| interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x184 0x4>, <0x17c 0x4>; |
| reg-names = "mux status", "mux mask"; |
| mrvl,intc-nr-irqs = <4>; |
| }; |
| |
| misc2_mux: interrupt-controller@d4282188 { |
| compatible = "mrvl,mmp2-mux-intc"; |
| interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x188 0x4>, <0x180 0x4>; |
| reg-names = "mux status", "mux mask"; |
| mrvl,intc-nr-irqs = <20>; |
| }; |
| |
| hsi0_mux: interrupt-controller@d42821d0 { |
| compatible = "mrvl,mmp2-mux-intc"; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x1d0 0x4>, <0x1b8 0x4>; |
| reg-names = "mux status", "mux mask"; |
| mrvl,intc-nr-irqs = <5>; |
| }; |
| |
| usb_otg_phy0: usb-otg-phy@d4207000 { |
| compatible = "marvell,mmp3-usb-phy"; |
| reg = <0xd4207000 0x40>; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| usb_otg0: usb-otg@d4208000 { |
| compatible = "marvell,pxau2o-ehci"; |
| reg = <0xd4208000 0x200>; |
| interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&soc_clocks MMP2_CLK_USB>; |
| clock-names = "USBCLK"; |
| phys = <&usb_otg_phy0>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| hsic_phy0: hsic-phy@f0001800 { |
| compatible = "marvell,mmp3-hsic-phy", |
| "usb-nop-xceiv"; |
| reg = <0xf0001800 0x40>; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| hsic0: hsic@f0001000 { |
| compatible = "marvell,pxau2o-ehci"; |
| reg = <0xf0001000 0x200>; |
| interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&soc_clocks MMP2_CLK_USBHSIC0>; |
| clock-names = "USBCLK"; |
| phys = <&hsic_phy0>; |
| phy-names = "usb"; |
| phy_type = "hsic"; |
| #address-cells = <0x01>; |
| #size-cells = <0x00>; |
| status = "disabled"; |
| }; |
| |
| hsic_phy1: hsic-phy@f0002800 { |
| compatible = "marvell,mmp3-hsic-phy", |
| "usb-nop-xceiv"; |
| reg = <0xf0002800 0x40>; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| hsic1: hsic@f0002000 { |
| compatible = "marvell,pxau2o-ehci"; |
| reg = <0xf0002000 0x200>; |
| interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&soc_clocks MMP2_CLK_USBHSIC1>; |
| clock-names = "USBCLK"; |
| phys = <&hsic_phy1>; |
| phy-names = "usb"; |
| phy_type = "hsic"; |
| #address-cells = <0x01>; |
| #size-cells = <0x00>; |
| status = "disabled"; |
| }; |
| |
| mmc1: mmc@d4280000 { |
| compatible = "mrvl,pxav3-mmc"; |
| reg = <0xd4280000 0x120>; |
| clocks = <&soc_clocks MMP2_CLK_SDH0>; |
| clock-names = "io"; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| mmc2: mmc@d4280800 { |
| compatible = "mrvl,pxav3-mmc"; |
| reg = <0xd4280800 0x120>; |
| clocks = <&soc_clocks MMP2_CLK_SDH1>; |
| clock-names = "io"; |
| interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| mmc3: mmc@d4281000 { |
| compatible = "mrvl,pxav3-mmc"; |
| reg = <0xd4281000 0x120>; |
| clocks = <&soc_clocks MMP2_CLK_SDH2>; |
| clock-names = "io"; |
| interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| mmc4: mmc@d4281800 { |
| compatible = "mrvl,pxav3-mmc"; |
| reg = <0xd4281800 0x120>; |
| clocks = <&soc_clocks MMP2_CLK_SDH3>; |
| clock-names = "io"; |
| interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| camera0: camera@d420a000 { |
| compatible = "marvell,mmp2-ccic"; |
| reg = <0xd420a000 0x800>; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&soc_clocks MMP2_CLK_CCIC0>; |
| clock-names = "axi"; |
| #clock-cells = <0>; |
| clock-output-names = "mclk"; |
| status = "disabled"; |
| }; |
| |
| camera1: camera@d420a800 { |
| compatible = "marvell,mmp2-ccic"; |
| reg = <0xd420a800 0x800>; |
| interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&soc_clocks MMP2_CLK_CCIC1>; |
| clock-names = "axi"; |
| #clock-cells = <0>; |
| clock-output-names = "mclk"; |
| status = "disabled"; |
| }; |
| }; |
| |
| apb@d4000000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xd4000000 0x00200000>; |
| ranges; |
| |
| timer: timer@d4014000 { |
| compatible = "mrvl,mmp-timer"; |
| reg = <0xd4014000 0x100>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&soc_clocks MMP2_CLK_TIMER>; |
| }; |
| |
| uart1: uart@d4030000 { |
| compatible = "mrvl,mmp-uart"; |
| reg = <0xd4030000 0x1000>; |
| interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&soc_clocks MMP2_CLK_UART0>; |
| resets = <&soc_clocks MMP2_CLK_UART0>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| uart2: uart@d4017000 { |
| compatible = "mrvl,mmp-uart"; |
| reg = <0xd4017000 0x1000>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&soc_clocks MMP2_CLK_UART1>; |
| resets = <&soc_clocks MMP2_CLK_UART1>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| uart3: uart@d4018000 { |
| compatible = "mrvl,mmp-uart"; |
| reg = <0xd4018000 0x1000>; |
| interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&soc_clocks MMP2_CLK_UART2>; |
| resets = <&soc_clocks MMP2_CLK_UART2>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| uart4: uart@d4016000 { |
| compatible = "mrvl,mmp-uart"; |
| reg = <0xd4016000 0x1000>; |
| interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&soc_clocks MMP2_CLK_UART3>; |
| resets = <&soc_clocks MMP2_CLK_UART3>; |
| reg-shift = <2>; |
| status = "disabled"; |
| }; |
| |
| gpio: gpio@d4019000 { |
| compatible = "marvell,mmp2-gpio"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xd4019000 0x1000>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "gpio_mux"; |
| clocks = <&soc_clocks MMP2_CLK_GPIO>; |
| resets = <&soc_clocks MMP2_CLK_GPIO>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| ranges; |
| |
| gcb0: gpio@d4019000 { |
| reg = <0xd4019000 0x4>; |
| }; |
| |
| gcb1: gpio@d4019004 { |
| reg = <0xd4019004 0x4>; |
| }; |
| |
| gcb2: gpio@d4019008 { |
| reg = <0xd4019008 0x4>; |
| }; |
| |
| gcb3: gpio@d4019100 { |
| reg = <0xd4019100 0x4>; |
| }; |
| |
| gcb4: gpio@d4019104 { |
| reg = <0xd4019104 0x4>; |
| }; |
| |
| gcb5: gpio@d4019108 { |
| reg = <0xd4019108 0x4>; |
| }; |
| }; |
| |
| twsi1: i2c@d4011000 { |
| compatible = "mrvl,mmp-twsi"; |
| reg = <0xd4011000 0x70>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&soc_clocks MMP2_CLK_TWSI0>; |
| resets = <&soc_clocks MMP2_CLK_TWSI0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| mrvl,i2c-fast-mode; |
| status = "disabled"; |
| }; |
| |
| twsi2: i2c@d4031000 { |
| compatible = "mrvl,mmp-twsi"; |
| reg = <0xd4031000 0x70>; |
| interrupt-parent = <&twsi_mux>; |
| interrupts = <0>; |
| clocks = <&soc_clocks MMP2_CLK_TWSI1>; |
| resets = <&soc_clocks MMP2_CLK_TWSI1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| twsi3: i2c@d4032000 { |
| compatible = "mrvl,mmp-twsi"; |
| reg = <0xd4032000 0x70>; |
| interrupt-parent = <&twsi_mux>; |
| interrupts = <1>; |
| clocks = <&soc_clocks MMP2_CLK_TWSI2>; |
| resets = <&soc_clocks MMP2_CLK_TWSI2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| twsi4: i2c@d4033000 { |
| compatible = "mrvl,mmp-twsi"; |
| reg = <0xd4033000 0x70>; |
| interrupt-parent = <&twsi_mux>; |
| interrupts = <2>; |
| clocks = <&soc_clocks MMP2_CLK_TWSI3>; |
| resets = <&soc_clocks MMP2_CLK_TWSI3>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| |
| twsi5: i2c@d4033800 { |
| compatible = "mrvl,mmp-twsi"; |
| reg = <0xd4033800 0x70>; |
| interrupt-parent = <&twsi_mux>; |
| interrupts = <3>; |
| clocks = <&soc_clocks MMP2_CLK_TWSI4>; |
| resets = <&soc_clocks MMP2_CLK_TWSI4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| twsi6: i2c@d4034000 { |
| compatible = "mrvl,mmp-twsi"; |
| reg = <0xd4034000 0x70>; |
| interrupt-parent = <&twsi_mux>; |
| interrupts = <4>; |
| clocks = <&soc_clocks MMP2_CLK_TWSI5>; |
| resets = <&soc_clocks MMP2_CLK_TWSI5>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| rtc: rtc@d4010000 { |
| compatible = "mrvl,mmp-rtc"; |
| reg = <0xd4010000 0x1000>; |
| interrupts = <1 0>; |
| interrupt-names = "rtc 1Hz", "rtc alarm"; |
| interrupt-parent = <&rtc_mux>; |
| clocks = <&soc_clocks MMP2_CLK_RTC>; |
| resets = <&soc_clocks MMP2_CLK_RTC>; |
| status = "disabled"; |
| }; |
| |
| ssp1: spi@d4035000 { |
| compatible = "marvell,mmp2-ssp"; |
| reg = <0xd4035000 0x1000>; |
| clocks = <&soc_clocks MMP2_CLK_SSP0>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| ssp2: spi@d4036000 { |
| compatible = "marvell,mmp2-ssp"; |
| reg = <0xd4036000 0x1000>; |
| clocks = <&soc_clocks MMP2_CLK_SSP1>; |
| interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| ssp3: spi@d4037000 { |
| compatible = "marvell,mmp2-ssp"; |
| reg = <0xd4037000 0x1000>; |
| clocks = <&soc_clocks MMP2_CLK_SSP2>; |
| interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| ssp4: spi@d4039000 { |
| compatible = "marvell,mmp2-ssp"; |
| reg = <0xd4039000 0x1000>; |
| clocks = <&soc_clocks MMP2_CLK_SSP3>; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| l2: l2-cache-controller@d0020000 { |
| compatible = "marvell,tauros3-cache", "arm,pl310-cache"; |
| reg = <0xd0020000 0x1000>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| |
| soc_clocks: clocks@d4050000 { |
| compatible = "marvell,mmp2-clock"; |
| reg = <0xd4050000 0x1000>, |
| <0xd4282800 0x400>, |
| <0xd4015000 0x1000>; |
| reg-names = "mpmu", "apmu", "apbc"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| snoop-control-unit@e0000000 { |
| compatible = "arm,arm11mp-scu"; |
| reg = <0xe0000000 0x100>; |
| }; |
| |
| gic: interrupt-controller@e0001000 { |
| compatible = "arm,arm11mp-gic"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| reg = <0xe0001000 0x1000>, |
| <0xe0000100 0x100>; |
| }; |
| |
| local-timer@e0000600 { |
| compatible = "arm,arm11mp-twd-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | |
| IRQ_TYPE_EDGE_RISING)>; |
| reg = <0xe0000600 0x20>; |
| }; |
| |
| watchdog@e0000620 { |
| compatible = "arm,arm11mp-twd-wdt"; |
| reg = <0xe0000620 0x20>; |
| interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | |
| IRQ_TYPE_EDGE_RISING)>; |
| }; |
| }; |
| }; |
