| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ |
| * Copyright (C) 2014 Stefan Roese <sr@denx.de> |
| */ |
| |
| #include "omap3-tao3530.dtsi" |
| |
| / { |
| gpio_poweroff { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&poweroff_pins>; |
| |
| compatible = "gpio-poweroff"; |
| gpios = <&gpio6 8 GPIO_ACTIVE_LOW>; /* GPIO 168 */ |
| }; |
| }; |
| |
| &omap3_pmx_core { |
| sound2_pins: pinmux_sound2_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x209e, PIN_OUTPUT | MUX_MODE4) /* gpmc_d8 gpio_44 */ |
| >; |
| }; |
| |
| led_blue_pins: pinmux_led_blue_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE4) /* cam_xclka gpio_96, LED blue */ |
| >; |
| }; |
| |
| led_green_pins: pinmux_led_green_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x2126, PIN_OUTPUT | MUX_MODE4) /* cam_d8 gpio_107, LED green */ |
| >; |
| }; |
| |
| led_red_pins: pinmux_led_red_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT_PULLUP | MUX_MODE4) /* cam_xclkb gpio_111, LED red */ |
| >; |
| }; |
| |
| poweroff_pins: pinmux_poweroff_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT_PULLUP | MUX_MODE4) /* i2c2_scl gpio_168 */ |
| >; |
| }; |
| |
| powerdown_input_pins: pinmux_powerdown_input_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE4) /* i2c2_sda gpio_183 */ |
| >; |
| }; |
| |
| fpga_boot0_pins: fpga_boot0_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* cam_d2 gpio_101 */ |
| OMAP3_CORE1_IOPAD(0x211c, PIN_OUTPUT | MUX_MODE4) /* cam_d3 gpio_102 */ |
| OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE4) /* cam_d4 gpio_103 */ |
| OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d5 gpio_104 */ |
| >; |
| }; |
| |
| fpga_boot1_pins: fpga_boot1_pins { |
| pinctrl-single,pins = < |
| OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE4) /* gpmc_d10 gpio_46 */ |
| OMAP3_CORE1_IOPAD(0x20a4, PIN_OUTPUT | MUX_MODE4) /* gpmc_d11 gpio_47 */ |
| OMAP3_CORE1_IOPAD(0x20a6, PIN_OUTPUT | MUX_MODE4) /* gpmc_d12 gpio_48 */ |
| OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_d13 gpio_49 */ |
| >; |
| }; |
| }; |
| |
| /* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */ |
| &i2c2 { |
| status = "disabled"; |
| }; |
| |
| &i2c3 { |
| clock-frequency = <100000>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_pins>; |
| }; |
