| #include <asm/asm-offsets.h> |
| #include <asm/thread_info.h> |
| |
| #define PAGE_SIZE _PAGE_SIZE |
| |
| /* |
| * Put .bss..swapper_pg_dir as the first thing in .bss. This will |
| * ensure that it has .bss alignment (64K). |
| */ |
| #define BSS_FIRST_SECTIONS *(.bss..swapper_pg_dir) |
| |
| #include <asm-generic/vmlinux.lds.h> |
| |
| #undef mips |
| #define mips mips |
| OUTPUT_ARCH(mips) |
| ENTRY(kernel_entry) |
| PHDRS { |
| text PT_LOAD FLAGS(7); /* RWX */ |
| #ifndef CONFIG_CAVIUM_OCTEON_SOC |
| note PT_NOTE FLAGS(4); /* R__ */ |
| #endif /* CAVIUM_OCTEON_SOC */ |
| } |
| |
| #ifdef CONFIG_32BIT |
| #ifdef CONFIG_CPU_LITTLE_ENDIAN |
| jiffies = jiffies_64; |
| #else |
| jiffies = jiffies_64 + 4; |
| #endif |
| #else |
| jiffies = jiffies_64; |
| #endif |
| |
| SECTIONS |
| { |
| #ifdef CONFIG_BOOT_ELF64 |
| /* Read-only sections, merged into text segment: */ |
| /* . = 0xc000000000000000; */ |
| |
| /* This is the value for an Origin kernel, taken from an IRIX kernel. */ |
| /* . = 0xc00000000001c000; */ |
| |
| /* Set the vaddr for the text segment to a value |
| * >= 0xa800 0000 0001 9000 if no symmon is going to configured |
| * >= 0xa800 0000 0030 0000 otherwise |
| */ |
| |
| /* . = 0xa800000000300000; */ |
| . = 0xffffffff80300000; |
| #endif |
| . = VMLINUX_LOAD_ADDRESS; |
| /* read-only */ |
| _text = .; /* Text and read-only data */ |
| .text : { |
| TEXT_TEXT |
| SCHED_TEXT |
| CPUIDLE_TEXT |
| LOCK_TEXT |
| KPROBES_TEXT |
| IRQENTRY_TEXT |
| SOFTIRQENTRY_TEXT |
| *(.text.*) |
| *(.fixup) |
| *(.gnu.warning) |
| } :text = 0 |
| _etext = .; /* End of text section */ |
| |
| EXCEPTION_TABLE(16) |
| |
| /* Exception table for data bus errors */ |
| __dbe_table : { |
| __start___dbe_table = .; |
| *(__dbe_table) |
| __stop___dbe_table = .; |
| } |
| |
| #ifdef CONFIG_CAVIUM_OCTEON_SOC |
| #define NOTES_HEADER |
| #else /* CONFIG_CAVIUM_OCTEON_SOC */ |
| #define NOTES_HEADER :note |
| #endif /* CONFIG_CAVIUM_OCTEON_SOC */ |
| NOTES :text NOTES_HEADER |
| .dummy : { *(.dummy) } :text |
| |
| _sdata = .; /* Start of data section */ |
| RODATA |
| |
| /* writeable */ |
| .data : { /* Data */ |
| . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */ |
| |
| INIT_TASK_DATA(THREAD_SIZE) |
| NOSAVE_DATA |
| CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) |
| READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) |
| DATA_DATA |
| CONSTRUCTORS |
| } |
| _gp = . + 0x8000; |
| .lit8 : { |
| *(.lit8) |
| } |
| .lit4 : { |
| *(.lit4) |
| } |
| /* We want the small data sections together, so single-instruction offsets |
| can access them all, and initialized data all before uninitialized, so |
| we can shorten the on-disk segment size. */ |
| .sdata : { |
| *(.sdata) |
| } |
| _edata = .; /* End of data section */ |
| |
| /* will be freed after init */ |
| . = ALIGN(PAGE_SIZE); /* Init code and data */ |
| __init_begin = .; |
| INIT_TEXT_SECTION(PAGE_SIZE) |
| INIT_DATA_SECTION(16) |
| |
| . = ALIGN(4); |
| .mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) { |
| __mips_machines_start = .; |
| *(.mips.machines.init) |
| __mips_machines_end = .; |
| } |
| |
| /* .exit.text is discarded at runtime, not link time, to deal with |
| * references from .rodata |
| */ |
| .exit.text : { |
| EXIT_TEXT |
| } |
| .exit.data : { |
| EXIT_DATA |
| } |
| #ifdef CONFIG_SMP |
| PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT) |
| #endif |
| |
| #ifdef CONFIG_RELOCATABLE |
| . = ALIGN(4); |
| |
| .data.reloc : { |
| _relocation_start = .; |
| /* |
| * Space for relocation table |
| * This needs to be filled so that the |
| * relocs tool can overwrite the content. |
| * An invalid value is left at the start of the |
| * section to abort relocation if the table |
| * has not been filled in. |
| */ |
| LONG(0xFFFFFFFF); |
| FILL(0); |
| . += CONFIG_RELOCATION_TABLE_SIZE - 4; |
| _relocation_end = .; |
| } |
| #endif |
| |
| #ifdef CONFIG_MIPS_RAW_APPENDED_DTB |
| __appended_dtb = .; |
| /* leave space for appended DTB */ |
| . += 0x100000; |
| #elif defined(CONFIG_MIPS_ELF_APPENDED_DTB) |
| .appended_dtb : AT(ADDR(.appended_dtb) - LOAD_OFFSET) { |
| *(.appended_dtb) |
| KEEP(*(.appended_dtb)) |
| } |
| #endif |
| /* |
| * Align to 64K in attempt to eliminate holes before the |
| * .bss..swapper_pg_dir section at the start of .bss. This |
| * also satisfies PAGE_SIZE alignment as the largest page size |
| * allowed is 64K. |
| */ |
| . = ALIGN(0x10000); |
| __init_end = .; |
| /* freed after init ends here */ |
| |
| /* |
| * Force .bss to 64K alignment so that .bss..swapper_pg_dir |
| * gets that alignment. .sbss should be empty, so there will be |
| * no holes after __init_end. */ |
| BSS_SECTION(0, 0x10000, 8) |
| |
| _end = . ; |
| |
| /* These mark the ABI of the kernel for debuggers. */ |
| .mdebug.abi32 : { |
| KEEP(*(.mdebug.abi32)) |
| } |
| .mdebug.abi64 : { |
| KEEP(*(.mdebug.abi64)) |
| } |
| |
| /* This is the MIPS specific mdebug section. */ |
| .mdebug : { |
| *(.mdebug) |
| } |
| |
| STABS_DEBUG |
| DWARF_DEBUG |
| |
| /* These must appear regardless of . */ |
| .gptab.sdata : { |
| *(.gptab.data) |
| *(.gptab.sdata) |
| } |
| .gptab.sbss : { |
| *(.gptab.bss) |
| *(.gptab.sbss) |
| } |
| |
| /* Sections to be discarded */ |
| DISCARDS |
| /DISCARD/ : { |
| /* ABI crap starts here */ |
| *(.MIPS.abiflags) |
| *(.MIPS.options) |
| *(.options) |
| *(.pdr) |
| *(.reginfo) |
| *(.eh_frame) |
| } |
| } |