| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // Copyright (C) 2018 BayLibre SAS |
| // Author: Bartosz Golaszewski <bgolaszewski@baylibre.com> |
| // |
| // Core MFD driver for MAXIM 77650/77651 charger/power-supply. |
| // Programming manual: https://pdfserv.maximintegrated.com/en/an/AN6428.pdf |
| |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/max77650.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/regmap.h> |
| |
| #define MAX77650_INT_GPI_F_MSK BIT(0) |
| #define MAX77650_INT_GPI_R_MSK BIT(1) |
| #define MAX77650_INT_GPI_MSK \ |
| (MAX77650_INT_GPI_F_MSK | MAX77650_INT_GPI_R_MSK) |
| #define MAX77650_INT_nEN_F_MSK BIT(2) |
| #define MAX77650_INT_nEN_R_MSK BIT(3) |
| #define MAX77650_INT_TJAL1_R_MSK BIT(4) |
| #define MAX77650_INT_TJAL2_R_MSK BIT(5) |
| #define MAX77650_INT_DOD_R_MSK BIT(6) |
| |
| #define MAX77650_INT_THM_MSK BIT(0) |
| #define MAX77650_INT_CHG_MSK BIT(1) |
| #define MAX77650_INT_CHGIN_MSK BIT(2) |
| #define MAX77650_INT_TJ_REG_MSK BIT(3) |
| #define MAX77650_INT_CHGIN_CTRL_MSK BIT(4) |
| #define MAX77650_INT_SYS_CTRL_MSK BIT(5) |
| #define MAX77650_INT_SYS_CNFG_MSK BIT(6) |
| |
| #define MAX77650_INT_GLBL_OFFSET 0 |
| #define MAX77650_INT_CHG_OFFSET 1 |
| |
| #define MAX77650_SBIA_LPM_MASK BIT(5) |
| #define MAX77650_SBIA_LPM_DISABLED 0x00 |
| |
| enum { |
| MAX77650_INT_GPI, |
| MAX77650_INT_nEN_F, |
| MAX77650_INT_nEN_R, |
| MAX77650_INT_TJAL1_R, |
| MAX77650_INT_TJAL2_R, |
| MAX77650_INT_DOD_R, |
| MAX77650_INT_THM, |
| MAX77650_INT_CHG, |
| MAX77650_INT_CHGIN, |
| MAX77650_INT_TJ_REG, |
| MAX77650_INT_CHGIN_CTRL, |
| MAX77650_INT_SYS_CTRL, |
| MAX77650_INT_SYS_CNFG, |
| }; |
| |
| static const struct resource max77650_charger_resources[] = { |
| DEFINE_RES_IRQ_NAMED(MAX77650_INT_CHG, "CHG"), |
| DEFINE_RES_IRQ_NAMED(MAX77650_INT_CHGIN, "CHGIN"), |
| }; |
| |
| static const struct resource max77650_gpio_resources[] = { |
| DEFINE_RES_IRQ_NAMED(MAX77650_INT_GPI, "GPI"), |
| }; |
| |
| static const struct resource max77650_onkey_resources[] = { |
| DEFINE_RES_IRQ_NAMED(MAX77650_INT_nEN_F, "nEN_F"), |
| DEFINE_RES_IRQ_NAMED(MAX77650_INT_nEN_R, "nEN_R"), |
| }; |
| |
| static const struct mfd_cell max77650_cells[] = { |
| { |
| .name = "max77650-regulator", |
| .of_compatible = "maxim,max77650-regulator", |
| }, { |
| .name = "max77650-charger", |
| .of_compatible = "maxim,max77650-charger", |
| .resources = max77650_charger_resources, |
| .num_resources = ARRAY_SIZE(max77650_charger_resources), |
| }, { |
| .name = "max77650-gpio", |
| .of_compatible = "maxim,max77650-gpio", |
| .resources = max77650_gpio_resources, |
| .num_resources = ARRAY_SIZE(max77650_gpio_resources), |
| }, { |
| .name = "max77650-led", |
| .of_compatible = "maxim,max77650-led", |
| }, { |
| .name = "max77650-onkey", |
| .of_compatible = "maxim,max77650-onkey", |
| .resources = max77650_onkey_resources, |
| .num_resources = ARRAY_SIZE(max77650_onkey_resources), |
| }, |
| }; |
| |
| static const struct regmap_irq max77650_irqs[] = { |
| [MAX77650_INT_GPI] = { |
| .reg_offset = MAX77650_INT_GLBL_OFFSET, |
| .mask = MAX77650_INT_GPI_MSK, |
| .type = { |
| .type_falling_val = MAX77650_INT_GPI_F_MSK, |
| .type_rising_val = MAX77650_INT_GPI_R_MSK, |
| .types_supported = IRQ_TYPE_EDGE_BOTH, |
| }, |
| }, |
| REGMAP_IRQ_REG(MAX77650_INT_nEN_F, |
| MAX77650_INT_GLBL_OFFSET, MAX77650_INT_nEN_F_MSK), |
| REGMAP_IRQ_REG(MAX77650_INT_nEN_R, |
| MAX77650_INT_GLBL_OFFSET, MAX77650_INT_nEN_R_MSK), |
| REGMAP_IRQ_REG(MAX77650_INT_TJAL1_R, |
| MAX77650_INT_GLBL_OFFSET, MAX77650_INT_TJAL1_R_MSK), |
| REGMAP_IRQ_REG(MAX77650_INT_TJAL2_R, |
| MAX77650_INT_GLBL_OFFSET, MAX77650_INT_TJAL2_R_MSK), |
| REGMAP_IRQ_REG(MAX77650_INT_DOD_R, |
| MAX77650_INT_GLBL_OFFSET, MAX77650_INT_DOD_R_MSK), |
| REGMAP_IRQ_REG(MAX77650_INT_THM, |
| MAX77650_INT_CHG_OFFSET, MAX77650_INT_THM_MSK), |
| REGMAP_IRQ_REG(MAX77650_INT_CHG, |
| MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHG_MSK), |
| REGMAP_IRQ_REG(MAX77650_INT_CHGIN, |
| MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHGIN_MSK), |
| REGMAP_IRQ_REG(MAX77650_INT_TJ_REG, |
| MAX77650_INT_CHG_OFFSET, MAX77650_INT_TJ_REG_MSK), |
| REGMAP_IRQ_REG(MAX77650_INT_CHGIN_CTRL, |
| MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHGIN_CTRL_MSK), |
| REGMAP_IRQ_REG(MAX77650_INT_SYS_CTRL, |
| MAX77650_INT_CHG_OFFSET, MAX77650_INT_SYS_CTRL_MSK), |
| REGMAP_IRQ_REG(MAX77650_INT_SYS_CNFG, |
| MAX77650_INT_CHG_OFFSET, MAX77650_INT_SYS_CNFG_MSK), |
| }; |
| |
| static const struct regmap_irq_chip max77650_irq_chip = { |
| .name = "max77650-irq", |
| .irqs = max77650_irqs, |
| .num_irqs = ARRAY_SIZE(max77650_irqs), |
| .num_regs = 2, |
| .status_base = MAX77650_REG_INT_GLBL, |
| .mask_base = MAX77650_REG_INTM_GLBL, |
| .type_in_mask = true, |
| .type_invert = true, |
| .init_ack_masked = true, |
| .clear_on_unmask = true, |
| }; |
| |
| static const struct regmap_config max77650_regmap_config = { |
| .name = "max77650", |
| .reg_bits = 8, |
| .val_bits = 8, |
| }; |
| |
| static int max77650_i2c_probe(struct i2c_client *i2c) |
| { |
| struct regmap_irq_chip_data *irq_data; |
| struct device *dev = &i2c->dev; |
| struct irq_domain *domain; |
| struct regmap *map; |
| unsigned int val; |
| int rv, id; |
| |
| map = devm_regmap_init_i2c(i2c, &max77650_regmap_config); |
| if (IS_ERR(map)) { |
| dev_err(dev, "Unable to initialise I2C Regmap\n"); |
| return PTR_ERR(map); |
| } |
| |
| rv = regmap_read(map, MAX77650_REG_CID, &val); |
| if (rv) { |
| dev_err(dev, "Unable to read Chip ID\n"); |
| return rv; |
| } |
| |
| id = MAX77650_CID_BITS(val); |
| switch (id) { |
| case MAX77650_CID_77650A: |
| case MAX77650_CID_77650C: |
| case MAX77650_CID_77651A: |
| case MAX77650_CID_77651B: |
| break; |
| default: |
| dev_err(dev, "Chip not supported - ID: 0x%02x\n", id); |
| return -ENODEV; |
| } |
| |
| /* |
| * This IC has a low-power mode which reduces the quiescent current |
| * consumption to ~5.6uA but is only suitable for systems consuming |
| * less than ~2mA. Since this is not likely the case even on |
| * linux-based wearables - keep the chip in normal power mode. |
| */ |
| rv = regmap_update_bits(map, |
| MAX77650_REG_CNFG_GLBL, |
| MAX77650_SBIA_LPM_MASK, |
| MAX77650_SBIA_LPM_DISABLED); |
| if (rv) { |
| dev_err(dev, "Unable to change the power mode\n"); |
| return rv; |
| } |
| |
| rv = devm_regmap_add_irq_chip(dev, map, i2c->irq, |
| IRQF_ONESHOT | IRQF_SHARED, 0, |
| &max77650_irq_chip, &irq_data); |
| if (rv) { |
| dev_err(dev, "Unable to add Regmap IRQ chip\n"); |
| return rv; |
| } |
| |
| domain = regmap_irq_get_domain(irq_data); |
| |
| return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, |
| max77650_cells, ARRAY_SIZE(max77650_cells), |
| NULL, 0, domain); |
| } |
| |
| static const struct of_device_id max77650_of_match[] = { |
| { .compatible = "maxim,max77650" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, max77650_of_match); |
| |
| static struct i2c_driver max77650_i2c_driver = { |
| .driver = { |
| .name = "max77650", |
| .of_match_table = max77650_of_match, |
| }, |
| .probe_new = max77650_i2c_probe, |
| }; |
| module_i2c_driver(max77650_i2c_driver); |
| |
| MODULE_DESCRIPTION("MAXIM 77650/77651 multi-function core driver"); |
| MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>"); |
| MODULE_LICENSE("GPL v2"); |