arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi

// SPDX-License-Identifier: (GPL-2.0 or MIT)
/*
 * Device Tree Source for the Spider CPU board
 *
 * Copyright (C) 2021 Renesas Electronics Corp.
 */

#include "r8a779f0.dtsi"

/ {
	model = "Renesas Spider CPU board";
	compatible = "renesas,spider-cpu", "renesas,r8a779f0";

	aliases {
		serial0 = &scif3;
		serial1 = &scif0;
	};

	chosen {
		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
		stdout-path = "serial0:115200n8";
	};

	memory@48000000 {
		device_type = "memory";
		/* first 128MB is reserved for secure area. */
		reg = <0x0 0x48000000 0x0 0x78000000>;
	};

	memory@480000000 {
		device_type = "memory";
		reg = <0x4 0x80000000 0x0 0x80000000>;
	};

	reg_1p8v: regulator-1p8v {
		compatible = "regulator-fixed";
		regulator-name = "fixed-1.8V";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-boot-on;
		regulator-always-on;
	};

	reg_3p3v: regulator-3p3v {
		compatible = "regulator-fixed";
		regulator-name = "fixed-3.3V";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-boot-on;
		regulator-always-on;
	};
};

&extal_clk {
	clock-frequency = <20000000>;
};

&extalr_clk {
	clock-frequency = <32768>;
};

&i2c4 {
	pinctrl-0 = <&i2c4_pins>;
	pinctrl-names = "default";

	status = "okay";
	clock-frequency = <400000>;

	eeprom@50 {
		compatible = "rohm,br24g01", "atmel,24c01";
		label = "cpu-board";
		reg = <0x50>;
		pagesize = <8>;
	};
};

/*
 * This board also has a microSD slot which we will not support upstream
 * because we cannot directly switch voltages in software.
 */
&mmc0 {
	pinctrl-0 = <&mmc_pins>;
	pinctrl-1 = <&mmc_pins>;
	pinctrl-names = "default", "state_uhs";

	vmmc-supply = <&reg_3p3v>;
	vqmmc-supply = <&reg_1p8v>;
	mmc-hs200-1_8v;
	mmc-hs400-1_8v;
	bus-width = <8>;
	no-sd;
	no-sdio;
	non-removable;
	full-pwr-cycle-in-suspend;
	status = "okay";
};

&pfc {
	pinctrl-0 = <&scif_clk_pins>;
	pinctrl-names = "default";

	i2c4_pins: i2c4 {
		groups = "i2c4";
		function = "i2c4";
	};

	mmc_pins: mmc {
		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
		function = "mmc";
		power-source = <1800>;
	};

	scif0_pins: scif0 {
		groups = "scif0_data", "scif0_ctrl";
		function = "scif0";
	};

	scif3_pins: scif3 {
		groups = "scif3_data", "scif3_ctrl";
		function = "scif3";
	};

	scif_clk_pins: scif_clk {
		groups = "scif_clk";
		function = "scif_clk";
	};
};

&rwdt {
	timeout-sec = <60>;
	status = "okay";
};

&scif0 {
	pinctrl-0 = <&scif0_pins>;
	pinctrl-names = "default";

	uart-has-rtscts;
	status = "okay";
};

&scif3 {
	pinctrl-0 = <&scif3_pins>;
	pinctrl-names = "default";

	uart-has-rtscts;
	status = "okay";
};

&scif_clk {
	clock-frequency = <24000000>;
};