| // SPDX-License-Identifier: GPL-2.0 |
| #include <linux/pci.h> |
| #include <linux/interrupt.h> |
| #include <linux/timer.h> |
| #include <linux/kernel.h> |
| |
| /* |
| * These functions are used early on before PCI scanning is done |
| * and all of the pci_dev and pci_bus structures have been created. |
| */ |
| static struct pci_dev *fake_pci_dev(struct pci_channel *hose, |
| int top_bus, int busnr, int devfn) |
| { |
| static struct pci_dev dev; |
| static struct pci_bus bus; |
| |
| dev.bus = &bus; |
| dev.sysdata = hose; |
| dev.devfn = devfn; |
| bus.number = busnr; |
| bus.sysdata = hose; |
| bus.ops = hose->pci_ops; |
| |
| if(busnr != top_bus) |
| /* Fake a parent bus structure. */ |
| bus.parent = &bus; |
| else |
| bus.parent = NULL; |
| |
| return &dev; |
| } |
| |
| #define EARLY_PCI_OP(rw, size, type) \ |
| int __init early_##rw##_config_##size(struct pci_channel *hose, \ |
| int top_bus, int bus, int devfn, int offset, type value) \ |
| { \ |
| return pci_##rw##_config_##size( \ |
| fake_pci_dev(hose, top_bus, bus, devfn), \ |
| offset, value); \ |
| } |
| |
| EARLY_PCI_OP(read, byte, u8 *) |
| EARLY_PCI_OP(read, word, u16 *) |
| EARLY_PCI_OP(read, dword, u32 *) |
| EARLY_PCI_OP(write, byte, u8) |
| EARLY_PCI_OP(write, word, u16) |
| EARLY_PCI_OP(write, dword, u32) |
| |
| int __init pci_is_66mhz_capable(struct pci_channel *hose, |
| int top_bus, int current_bus) |
| { |
| u32 pci_devfn; |
| unsigned short vid; |
| int cap66 = -1; |
| u16 stat; |
| |
| pr_info("PCI: Checking 66MHz capabilities...\n"); |
| |
| for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) { |
| if (PCI_FUNC(pci_devfn)) |
| continue; |
| if (early_read_config_word(hose, top_bus, current_bus, |
| pci_devfn, PCI_VENDOR_ID, &vid) != |
| PCIBIOS_SUCCESSFUL) |
| continue; |
| if (vid == 0xffff) |
| continue; |
| |
| /* check 66MHz capability */ |
| if (cap66 < 0) |
| cap66 = 1; |
| if (cap66) { |
| early_read_config_word(hose, top_bus, current_bus, |
| pci_devfn, PCI_STATUS, &stat); |
| if (!(stat & PCI_STATUS_66MHZ)) { |
| printk(KERN_DEBUG |
| "PCI: %02x:%02x not 66MHz capable.\n", |
| current_bus, pci_devfn); |
| cap66 = 0; |
| break; |
| } |
| } |
| } |
| |
| return cap66 > 0; |
| } |
| |
| static void pcibios_enable_err(struct timer_list *t) |
| { |
| struct pci_channel *hose = from_timer(hose, t, err_timer); |
| |
| del_timer(&hose->err_timer); |
| printk(KERN_DEBUG "PCI: re-enabling error IRQ.\n"); |
| enable_irq(hose->err_irq); |
| } |
| |
| static void pcibios_enable_serr(struct timer_list *t) |
| { |
| struct pci_channel *hose = from_timer(hose, t, serr_timer); |
| |
| del_timer(&hose->serr_timer); |
| printk(KERN_DEBUG "PCI: re-enabling system error IRQ.\n"); |
| enable_irq(hose->serr_irq); |
| } |
| |
| void pcibios_enable_timers(struct pci_channel *hose) |
| { |
| if (hose->err_irq) { |
| timer_setup(&hose->err_timer, pcibios_enable_err, 0); |
| } |
| |
| if (hose->serr_irq) { |
| timer_setup(&hose->serr_timer, pcibios_enable_serr, 0); |
| } |
| } |
| |
| /* |
| * A simple handler for the regular PCI status errors, called from IRQ |
| * context. |
| */ |
| unsigned int pcibios_handle_status_errors(unsigned long addr, |
| unsigned int status, |
| struct pci_channel *hose) |
| { |
| unsigned int cmd = 0; |
| |
| if (status & PCI_STATUS_REC_MASTER_ABORT) { |
| printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n", addr); |
| cmd |= PCI_STATUS_REC_MASTER_ABORT; |
| } |
| |
| if (status & PCI_STATUS_REC_TARGET_ABORT) { |
| printk(KERN_DEBUG "PCI: target abort: "); |
| pcibios_report_status(PCI_STATUS_REC_TARGET_ABORT | |
| PCI_STATUS_SIG_TARGET_ABORT | |
| PCI_STATUS_REC_MASTER_ABORT, 1); |
| pr_cont("\n"); |
| |
| cmd |= PCI_STATUS_REC_TARGET_ABORT; |
| } |
| |
| if (status & (PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY)) { |
| printk(KERN_DEBUG "PCI: parity error detected: "); |
| pcibios_report_status(PCI_STATUS_PARITY | |
| PCI_STATUS_DETECTED_PARITY, 1); |
| pr_cont("\n"); |
| |
| cmd |= PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY; |
| |
| /* Now back off of the IRQ for awhile */ |
| if (hose->err_irq) { |
| disable_irq_nosync(hose->err_irq); |
| hose->err_timer.expires = jiffies + HZ; |
| add_timer(&hose->err_timer); |
| } |
| } |
| |
| return cmd; |
| } |