| // SPDX-License-Identifier: GPL-2.0 |
| /* time.c: UltraSparc timer and TOD clock support. |
| * |
| * Copyright (C) 1997, 2008 David S. Miller (davem@davemloft.net) |
| * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) |
| * |
| * Based largely on code which is: |
| * |
| * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/export.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/param.h> |
| #include <linux/string.h> |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/time.h> |
| #include <linux/timex.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/mc146818rtc.h> |
| #include <linux/delay.h> |
| #include <linux/profile.h> |
| #include <linux/bcd.h> |
| #include <linux/jiffies.h> |
| #include <linux/cpufreq.h> |
| #include <linux/percpu.h> |
| #include <linux/rtc/m48t59.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/clockchips.h> |
| #include <linux/clocksource.h> |
| #include <linux/platform_device.h> |
| #include <linux/ftrace.h> |
| |
| #include <asm/oplib.h> |
| #include <asm/timer.h> |
| #include <asm/irq.h> |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/starfire.h> |
| #include <asm/smp.h> |
| #include <asm/sections.h> |
| #include <asm/cpudata.h> |
| #include <linux/uaccess.h> |
| #include <asm/irq_regs.h> |
| #include <asm/cacheflush.h> |
| |
| #include "entry.h" |
| #include "kernel.h" |
| |
| DEFINE_SPINLOCK(rtc_lock); |
| |
| #ifdef CONFIG_SMP |
| unsigned long profile_pc(struct pt_regs *regs) |
| { |
| unsigned long pc = instruction_pointer(regs); |
| |
| if (in_lock_functions(pc)) |
| return regs->u_regs[UREG_RETPC]; |
| return pc; |
| } |
| EXPORT_SYMBOL(profile_pc); |
| #endif |
| |
| static void tick_disable_protection(void) |
| { |
| /* Set things up so user can access tick register for profiling |
| * purposes. Also workaround BB_ERRATA_1 by doing a dummy |
| * read back of %tick after writing it. |
| */ |
| __asm__ __volatile__( |
| " ba,pt %%xcc, 1f\n" |
| " nop\n" |
| " .align 64\n" |
| "1: rd %%tick, %%g2\n" |
| " add %%g2, 6, %%g2\n" |
| " andn %%g2, %0, %%g2\n" |
| " wrpr %%g2, 0, %%tick\n" |
| " rdpr %%tick, %%g0" |
| : /* no outputs */ |
| : "r" (TICK_PRIV_BIT) |
| : "g2"); |
| } |
| |
| static void tick_disable_irq(void) |
| { |
| __asm__ __volatile__( |
| " ba,pt %%xcc, 1f\n" |
| " nop\n" |
| " .align 64\n" |
| "1: wr %0, 0x0, %%tick_cmpr\n" |
| " rd %%tick_cmpr, %%g0" |
| : /* no outputs */ |
| : "r" (TICKCMP_IRQ_BIT)); |
| } |
| |
| static void tick_init_tick(void) |
| { |
| tick_disable_protection(); |
| tick_disable_irq(); |
| } |
| |
| static unsigned long long tick_get_tick(void) |
| { |
| unsigned long ret; |
| |
| __asm__ __volatile__("rd %%tick, %0\n\t" |
| "mov %0, %0" |
| : "=r" (ret)); |
| |
| return ret & ~TICK_PRIV_BIT; |
| } |
| |
| static int tick_add_compare(unsigned long adj) |
| { |
| unsigned long orig_tick, new_tick, new_compare; |
| |
| __asm__ __volatile__("rd %%tick, %0" |
| : "=r" (orig_tick)); |
| |
| orig_tick &= ~TICKCMP_IRQ_BIT; |
| |
| /* Workaround for Spitfire Errata (#54 I think??), I discovered |
| * this via Sun BugID 4008234, mentioned in Solaris-2.5.1 patch |
| * number 103640. |
| * |
| * On Blackbird writes to %tick_cmpr can fail, the |
| * workaround seems to be to execute the wr instruction |
| * at the start of an I-cache line, and perform a dummy |
| * read back from %tick_cmpr right after writing to it. -DaveM |
| */ |
| __asm__ __volatile__("ba,pt %%xcc, 1f\n\t" |
| " add %1, %2, %0\n\t" |
| ".align 64\n" |
| "1:\n\t" |
| "wr %0, 0, %%tick_cmpr\n\t" |
| "rd %%tick_cmpr, %%g0\n\t" |
| : "=r" (new_compare) |
| : "r" (orig_tick), "r" (adj)); |
| |
| __asm__ __volatile__("rd %%tick, %0" |
| : "=r" (new_tick)); |
| new_tick &= ~TICKCMP_IRQ_BIT; |
| |
| return ((long)(new_tick - (orig_tick+adj))) > 0L; |
| } |
| |
| static unsigned long tick_add_tick(unsigned long adj) |
| { |
| unsigned long new_tick; |
| |
| /* Also need to handle Blackbird bug here too. */ |
| __asm__ __volatile__("rd %%tick, %0\n\t" |
| "add %0, %1, %0\n\t" |
| "wrpr %0, 0, %%tick\n\t" |
| : "=&r" (new_tick) |
| : "r" (adj)); |
| |
| return new_tick; |
| } |
| |
| /* Searches for cpu clock frequency with given cpuid in OpenBoot tree */ |
| static unsigned long cpuid_to_freq(phandle node, int cpuid) |
| { |
| bool is_cpu_node = false; |
| unsigned long freq = 0; |
| char type[128]; |
| |
| if (!node) |
| return freq; |
| |
| if (prom_getproperty(node, "device_type", type, sizeof(type)) != -1) |
| is_cpu_node = (strcmp(type, "cpu") == 0); |
| |
| /* try upa-portid then cpuid to get cpuid, see prom_64.c */ |
| if (is_cpu_node && (prom_getint(node, "upa-portid") == cpuid || |
| prom_getint(node, "cpuid") == cpuid)) |
| freq = prom_getintdefault(node, "clock-frequency", 0); |
| if (!freq) |
| freq = cpuid_to_freq(prom_getchild(node), cpuid); |
| if (!freq) |
| freq = cpuid_to_freq(prom_getsibling(node), cpuid); |
| |
| return freq; |
| } |
| |
| static unsigned long tick_get_frequency(void) |
| { |
| return cpuid_to_freq(prom_root_node, hard_smp_processor_id()); |
| } |
| |
| static struct sparc64_tick_ops tick_operations __cacheline_aligned = { |
| .name = "tick", |
| .init_tick = tick_init_tick, |
| .disable_irq = tick_disable_irq, |
| .get_tick = tick_get_tick, |
| .add_tick = tick_add_tick, |
| .add_compare = tick_add_compare, |
| .get_frequency = tick_get_frequency, |
| .softint_mask = 1UL << 0, |
| }; |
| |
| struct sparc64_tick_ops *tick_ops __read_mostly = &tick_operations; |
| EXPORT_SYMBOL(tick_ops); |
| |
| static void stick_disable_irq(void) |
| { |
| __asm__ __volatile__( |
| "wr %0, 0x0, %%asr25" |
| : /* no outputs */ |
| : "r" (TICKCMP_IRQ_BIT)); |
| } |
| |
| static void stick_init_tick(void) |
| { |
| /* Writes to the %tick and %stick register are not |
| * allowed on sun4v. The Hypervisor controls that |
| * bit, per-strand. |
| */ |
| if (tlb_type != hypervisor) { |
| tick_disable_protection(); |
| tick_disable_irq(); |
| |
| /* Let the user get at STICK too. */ |
| __asm__ __volatile__( |
| " rd %%asr24, %%g2\n" |
| " andn %%g2, %0, %%g2\n" |
| " wr %%g2, 0, %%asr24" |
| : /* no outputs */ |
| : "r" (TICK_PRIV_BIT) |
| : "g1", "g2"); |
| } |
| |
| stick_disable_irq(); |
| } |
| |
| static unsigned long long stick_get_tick(void) |
| { |
| unsigned long ret; |
| |
| __asm__ __volatile__("rd %%asr24, %0" |
| : "=r" (ret)); |
| |
| return ret & ~TICK_PRIV_BIT; |
| } |
| |
| static unsigned long stick_add_tick(unsigned long adj) |
| { |
| unsigned long new_tick; |
| |
| __asm__ __volatile__("rd %%asr24, %0\n\t" |
| "add %0, %1, %0\n\t" |
| "wr %0, 0, %%asr24\n\t" |
| : "=&r" (new_tick) |
| : "r" (adj)); |
| |
| return new_tick; |
| } |
| |
| static int stick_add_compare(unsigned long adj) |
| { |
| unsigned long orig_tick, new_tick; |
| |
| __asm__ __volatile__("rd %%asr24, %0" |
| : "=r" (orig_tick)); |
| orig_tick &= ~TICKCMP_IRQ_BIT; |
| |
| __asm__ __volatile__("wr %0, 0, %%asr25" |
| : /* no outputs */ |
| : "r" (orig_tick + adj)); |
| |
| __asm__ __volatile__("rd %%asr24, %0" |
| : "=r" (new_tick)); |
| new_tick &= ~TICKCMP_IRQ_BIT; |
| |
| return ((long)(new_tick - (orig_tick+adj))) > 0L; |
| } |
| |
| static unsigned long stick_get_frequency(void) |
| { |
| return prom_getintdefault(prom_root_node, "stick-frequency", 0); |
| } |
| |
| static struct sparc64_tick_ops stick_operations __read_mostly = { |
| .name = "stick", |
| .init_tick = stick_init_tick, |
| .disable_irq = stick_disable_irq, |
| .get_tick = stick_get_tick, |
| .add_tick = stick_add_tick, |
| .add_compare = stick_add_compare, |
| .get_frequency = stick_get_frequency, |
| .softint_mask = 1UL << 16, |
| }; |
| |
| /* On Hummingbird the STICK/STICK_CMPR register is implemented |
| * in I/O space. There are two 64-bit registers each, the |
| * first holds the low 32-bits of the value and the second holds |
| * the high 32-bits. |
| * |
| * Since STICK is constantly updating, we have to access it carefully. |
| * |
| * The sequence we use to read is: |
| * 1) read high |
| * 2) read low |
| * 3) read high again, if it rolled re-read both low and high again. |
| * |
| * Writing STICK safely is also tricky: |
| * 1) write low to zero |
| * 2) write high |
| * 3) write low |
| */ |
| static unsigned long __hbird_read_stick(void) |
| { |
| unsigned long ret, tmp1, tmp2, tmp3; |
| unsigned long addr = HBIRD_STICK_ADDR+8; |
| |
| __asm__ __volatile__("ldxa [%1] %5, %2\n" |
| "1:\n\t" |
| "sub %1, 0x8, %1\n\t" |
| "ldxa [%1] %5, %3\n\t" |
| "add %1, 0x8, %1\n\t" |
| "ldxa [%1] %5, %4\n\t" |
| "cmp %4, %2\n\t" |
| "bne,a,pn %%xcc, 1b\n\t" |
| " mov %4, %2\n\t" |
| "sllx %4, 32, %4\n\t" |
| "or %3, %4, %0\n\t" |
| : "=&r" (ret), "=&r" (addr), |
| "=&r" (tmp1), "=&r" (tmp2), "=&r" (tmp3) |
| : "i" (ASI_PHYS_BYPASS_EC_E), "1" (addr)); |
| |
| return ret; |
| } |
| |
| static void __hbird_write_stick(unsigned long val) |
| { |
| unsigned long low = (val & 0xffffffffUL); |
| unsigned long high = (val >> 32UL); |
| unsigned long addr = HBIRD_STICK_ADDR; |
| |
| __asm__ __volatile__("stxa %%g0, [%0] %4\n\t" |
| "add %0, 0x8, %0\n\t" |
| "stxa %3, [%0] %4\n\t" |
| "sub %0, 0x8, %0\n\t" |
| "stxa %2, [%0] %4" |
| : "=&r" (addr) |
| : "0" (addr), "r" (low), "r" (high), |
| "i" (ASI_PHYS_BYPASS_EC_E)); |
| } |
| |
| static void __hbird_write_compare(unsigned long val) |
| { |
| unsigned long low = (val & 0xffffffffUL); |
| unsigned long high = (val >> 32UL); |
| unsigned long addr = HBIRD_STICKCMP_ADDR + 0x8UL; |
| |
| __asm__ __volatile__("stxa %3, [%0] %4\n\t" |
| "sub %0, 0x8, %0\n\t" |
| "stxa %2, [%0] %4" |
| : "=&r" (addr) |
| : "0" (addr), "r" (low), "r" (high), |
| "i" (ASI_PHYS_BYPASS_EC_E)); |
| } |
| |
| static void hbtick_disable_irq(void) |
| { |
| __hbird_write_compare(TICKCMP_IRQ_BIT); |
| } |
| |
| static void hbtick_init_tick(void) |
| { |
| tick_disable_protection(); |
| |
| /* XXX This seems to be necessary to 'jumpstart' Hummingbird |
| * XXX into actually sending STICK interrupts. I think because |
| * XXX of how we store %tick_cmpr in head.S this somehow resets the |
| * XXX {TICK + STICK} interrupt mux. -DaveM |
| */ |
| __hbird_write_stick(__hbird_read_stick()); |
| |
| hbtick_disable_irq(); |
| } |
| |
| static unsigned long long hbtick_get_tick(void) |
| { |
| return __hbird_read_stick() & ~TICK_PRIV_BIT; |
| } |
| |
| static unsigned long hbtick_add_tick(unsigned long adj) |
| { |
| unsigned long val; |
| |
| val = __hbird_read_stick() + adj; |
| __hbird_write_stick(val); |
| |
| return val; |
| } |
| |
| static int hbtick_add_compare(unsigned long adj) |
| { |
| unsigned long val = __hbird_read_stick(); |
| unsigned long val2; |
| |
| val &= ~TICKCMP_IRQ_BIT; |
| val += adj; |
| __hbird_write_compare(val); |
| |
| val2 = __hbird_read_stick() & ~TICKCMP_IRQ_BIT; |
| |
| return ((long)(val2 - val)) > 0L; |
| } |
| |
| static unsigned long hbtick_get_frequency(void) |
| { |
| return prom_getintdefault(prom_root_node, "stick-frequency", 0); |
| } |
| |
| static struct sparc64_tick_ops hbtick_operations __read_mostly = { |
| .name = "hbtick", |
| .init_tick = hbtick_init_tick, |
| .disable_irq = hbtick_disable_irq, |
| .get_tick = hbtick_get_tick, |
| .add_tick = hbtick_add_tick, |
| .add_compare = hbtick_add_compare, |
| .get_frequency = hbtick_get_frequency, |
| .softint_mask = 1UL << 0, |
| }; |
| |
| unsigned long cmos_regs; |
| EXPORT_SYMBOL(cmos_regs); |
| |
| static struct resource rtc_cmos_resource; |
| |
| static struct platform_device rtc_cmos_device = { |
| .name = "rtc_cmos", |
| .id = -1, |
| .resource = &rtc_cmos_resource, |
| .num_resources = 1, |
| }; |
| |
| static int rtc_probe(struct platform_device *op) |
| { |
| struct resource *r; |
| |
| printk(KERN_INFO "%pOF: RTC regs at 0x%llx\n", |
| op->dev.of_node, op->resource[0].start); |
| |
| /* The CMOS RTC driver only accepts IORESOURCE_IO, so cons |
| * up a fake resource so that the probe works for all cases. |
| * When the RTC is behind an ISA bus it will have IORESOURCE_IO |
| * already, whereas when it's behind EBUS is will be IORESOURCE_MEM. |
| */ |
| |
| r = &rtc_cmos_resource; |
| r->flags = IORESOURCE_IO; |
| r->name = op->resource[0].name; |
| r->start = op->resource[0].start; |
| r->end = op->resource[0].end; |
| |
| cmos_regs = op->resource[0].start; |
| return platform_device_register(&rtc_cmos_device); |
| } |
| |
| static const struct of_device_id rtc_match[] = { |
| { |
| .name = "rtc", |
| .compatible = "m5819", |
| }, |
| { |
| .name = "rtc", |
| .compatible = "isa-m5819p", |
| }, |
| { |
| .name = "rtc", |
| .compatible = "isa-m5823p", |
| }, |
| { |
| .name = "rtc", |
| .compatible = "ds1287", |
| }, |
| {}, |
| }; |
| |
| static struct platform_driver rtc_driver = { |
| .probe = rtc_probe, |
| .driver = { |
| .name = "rtc", |
| .of_match_table = rtc_match, |
| }, |
| }; |
| |
| static struct platform_device rtc_bq4802_device = { |
| .name = "rtc-bq4802", |
| .id = -1, |
| .num_resources = 1, |
| }; |
| |
| static int bq4802_probe(struct platform_device *op) |
| { |
| |
| printk(KERN_INFO "%pOF: BQ4802 regs at 0x%llx\n", |
| op->dev.of_node, op->resource[0].start); |
| |
| rtc_bq4802_device.resource = &op->resource[0]; |
| return platform_device_register(&rtc_bq4802_device); |
| } |
| |
| static const struct of_device_id bq4802_match[] = { |
| { |
| .name = "rtc", |
| .compatible = "bq4802", |
| }, |
| {}, |
| }; |
| |
| static struct platform_driver bq4802_driver = { |
| .probe = bq4802_probe, |
| .driver = { |
| .name = "bq4802", |
| .of_match_table = bq4802_match, |
| }, |
| }; |
| |
| static unsigned char mostek_read_byte(struct device *dev, u32 ofs) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| void __iomem *regs = (void __iomem *) pdev->resource[0].start; |
| |
| return readb(regs + ofs); |
| } |
| |
| static void mostek_write_byte(struct device *dev, u32 ofs, u8 val) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| void __iomem *regs = (void __iomem *) pdev->resource[0].start; |
| |
| writeb(val, regs + ofs); |
| } |
| |
| static struct m48t59_plat_data m48t59_data = { |
| .read_byte = mostek_read_byte, |
| .write_byte = mostek_write_byte, |
| }; |
| |
| static struct platform_device m48t59_rtc = { |
| .name = "rtc-m48t59", |
| .id = 0, |
| .num_resources = 1, |
| .dev = { |
| .platform_data = &m48t59_data, |
| }, |
| }; |
| |
| static int mostek_probe(struct platform_device *op) |
| { |
| struct device_node *dp = op->dev.of_node; |
| |
| /* On an Enterprise system there can be multiple mostek clocks. |
| * We should only match the one that is on the central FHC bus. |
| */ |
| if (of_node_name_eq(dp->parent, "fhc") && |
| !of_node_name_eq(dp->parent->parent, "central")) |
| return -ENODEV; |
| |
| printk(KERN_INFO "%pOF: Mostek regs at 0x%llx\n", |
| dp, op->resource[0].start); |
| |
| m48t59_rtc.resource = &op->resource[0]; |
| return platform_device_register(&m48t59_rtc); |
| } |
| |
| static const struct of_device_id mostek_match[] = { |
| { |
| .name = "eeprom", |
| }, |
| {}, |
| }; |
| |
| static struct platform_driver mostek_driver = { |
| .probe = mostek_probe, |
| .driver = { |
| .name = "mostek", |
| .of_match_table = mostek_match, |
| }, |
| }; |
| |
| static struct platform_device rtc_sun4v_device = { |
| .name = "rtc-sun4v", |
| .id = -1, |
| }; |
| |
| static struct platform_device rtc_starfire_device = { |
| .name = "rtc-starfire", |
| .id = -1, |
| }; |
| |
| static int __init clock_init(void) |
| { |
| if (this_is_starfire) |
| return platform_device_register(&rtc_starfire_device); |
| |
| if (tlb_type == hypervisor) |
| return platform_device_register(&rtc_sun4v_device); |
| |
| (void) platform_driver_register(&rtc_driver); |
| (void) platform_driver_register(&mostek_driver); |
| (void) platform_driver_register(&bq4802_driver); |
| |
| return 0; |
| } |
| |
| /* Must be after subsys_initcall() so that busses are probed. Must |
| * be before device_initcall() because things like the RTC driver |
| * need to see the clock registers. |
| */ |
| fs_initcall(clock_init); |
| |
| /* Return true if this is Hummingbird, aka Ultra-IIe */ |
| static bool is_hummingbird(void) |
| { |
| unsigned long ver, manuf, impl; |
| |
| __asm__ __volatile__ ("rdpr %%ver, %0" |
| : "=&r" (ver)); |
| manuf = ((ver >> 48) & 0xffff); |
| impl = ((ver >> 32) & 0xffff); |
| |
| return (manuf == 0x17 && impl == 0x13); |
| } |
| |
| struct freq_table { |
| unsigned long clock_tick_ref; |
| unsigned int ref_freq; |
| }; |
| static DEFINE_PER_CPU(struct freq_table, sparc64_freq_table) = { 0, 0 }; |
| |
| unsigned long sparc64_get_clock_tick(unsigned int cpu) |
| { |
| struct freq_table *ft = &per_cpu(sparc64_freq_table, cpu); |
| |
| if (ft->clock_tick_ref) |
| return ft->clock_tick_ref; |
| return cpu_data(cpu).clock_tick; |
| } |
| EXPORT_SYMBOL(sparc64_get_clock_tick); |
| |
| #ifdef CONFIG_CPU_FREQ |
| |
| static int sparc64_cpufreq_notifier(struct notifier_block *nb, unsigned long val, |
| void *data) |
| { |
| struct cpufreq_freqs *freq = data; |
| unsigned int cpu; |
| struct freq_table *ft; |
| |
| for_each_cpu(cpu, freq->policy->cpus) { |
| ft = &per_cpu(sparc64_freq_table, cpu); |
| |
| if (!ft->ref_freq) { |
| ft->ref_freq = freq->old; |
| ft->clock_tick_ref = cpu_data(cpu).clock_tick; |
| } |
| |
| if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || |
| (val == CPUFREQ_POSTCHANGE && freq->old > freq->new)) { |
| cpu_data(cpu).clock_tick = |
| cpufreq_scale(ft->clock_tick_ref, ft->ref_freq, |
| freq->new); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct notifier_block sparc64_cpufreq_notifier_block = { |
| .notifier_call = sparc64_cpufreq_notifier |
| }; |
| |
| static int __init register_sparc64_cpufreq_notifier(void) |
| { |
| |
| cpufreq_register_notifier(&sparc64_cpufreq_notifier_block, |
| CPUFREQ_TRANSITION_NOTIFIER); |
| return 0; |
| } |
| |
| core_initcall(register_sparc64_cpufreq_notifier); |
| |
| #endif /* CONFIG_CPU_FREQ */ |
| |
| static int sparc64_next_event(unsigned long delta, |
| struct clock_event_device *evt) |
| { |
| return tick_operations.add_compare(delta) ? -ETIME : 0; |
| } |
| |
| static int sparc64_timer_shutdown(struct clock_event_device *evt) |
| { |
| tick_operations.disable_irq(); |
| return 0; |
| } |
| |
| static struct clock_event_device sparc64_clockevent = { |
| .features = CLOCK_EVT_FEAT_ONESHOT, |
| .set_state_shutdown = sparc64_timer_shutdown, |
| .set_next_event = sparc64_next_event, |
| .rating = 100, |
| .shift = 30, |
| .irq = -1, |
| }; |
| static DEFINE_PER_CPU(struct clock_event_device, sparc64_events); |
| |
| void __irq_entry timer_interrupt(int irq, struct pt_regs *regs) |
| { |
| struct pt_regs *old_regs = set_irq_regs(regs); |
| unsigned long tick_mask = tick_operations.softint_mask; |
| int cpu = smp_processor_id(); |
| struct clock_event_device *evt = &per_cpu(sparc64_events, cpu); |
| |
| clear_softint(tick_mask); |
| |
| irq_enter(); |
| |
| local_cpu_data().irq0_irqs++; |
| kstat_incr_irq_this_cpu(0); |
| |
| if (unlikely(!evt->event_handler)) { |
| printk(KERN_WARNING |
| "Spurious SPARC64 timer interrupt on cpu %d\n", cpu); |
| } else |
| evt->event_handler(evt); |
| |
| irq_exit(); |
| |
| set_irq_regs(old_regs); |
| } |
| |
| void setup_sparc64_timer(void) |
| { |
| struct clock_event_device *sevt; |
| unsigned long pstate; |
| |
| /* Guarantee that the following sequences execute |
| * uninterrupted. |
| */ |
| __asm__ __volatile__("rdpr %%pstate, %0\n\t" |
| "wrpr %0, %1, %%pstate" |
| : "=r" (pstate) |
| : "i" (PSTATE_IE)); |
| |
| tick_operations.init_tick(); |
| |
| /* Restore PSTATE_IE. */ |
| __asm__ __volatile__("wrpr %0, 0x0, %%pstate" |
| : /* no outputs */ |
| : "r" (pstate)); |
| |
| sevt = this_cpu_ptr(&sparc64_events); |
| |
| memcpy(sevt, &sparc64_clockevent, sizeof(*sevt)); |
| sevt->cpumask = cpumask_of(smp_processor_id()); |
| |
| clockevents_register_device(sevt); |
| } |
| |
| #define SPARC64_NSEC_PER_CYC_SHIFT 10UL |
| |
| static struct clocksource clocksource_tick = { |
| .rating = 100, |
| .mask = CLOCKSOURCE_MASK(64), |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| }; |
| |
| static unsigned long tb_ticks_per_usec __read_mostly; |
| |
| void __delay(unsigned long loops) |
| { |
| unsigned long bclock = get_tick(); |
| |
| while ((get_tick() - bclock) < loops) |
| ; |
| } |
| EXPORT_SYMBOL(__delay); |
| |
| void udelay(unsigned long usecs) |
| { |
| __delay(tb_ticks_per_usec * usecs); |
| } |
| EXPORT_SYMBOL(udelay); |
| |
| static u64 clocksource_tick_read(struct clocksource *cs) |
| { |
| return get_tick(); |
| } |
| |
| static void __init get_tick_patch(void) |
| { |
| unsigned int *addr, *instr, i; |
| struct get_tick_patch *p; |
| |
| if (tlb_type == spitfire && is_hummingbird()) |
| return; |
| |
| for (p = &__get_tick_patch; p < &__get_tick_patch_end; p++) { |
| instr = (tlb_type == spitfire) ? p->tick : p->stick; |
| addr = (unsigned int *)(unsigned long)p->addr; |
| for (i = 0; i < GET_TICK_NINSTR; i++) { |
| addr[i] = instr[i]; |
| /* ensure that address is modified before flush */ |
| wmb(); |
| flushi(&addr[i]); |
| } |
| } |
| } |
| |
| static void __init init_tick_ops(struct sparc64_tick_ops *ops) |
| { |
| unsigned long freq, quotient, tick; |
| |
| freq = ops->get_frequency(); |
| quotient = clocksource_hz2mult(freq, SPARC64_NSEC_PER_CYC_SHIFT); |
| tick = ops->get_tick(); |
| |
| ops->offset = (tick * quotient) >> SPARC64_NSEC_PER_CYC_SHIFT; |
| ops->ticks_per_nsec_quotient = quotient; |
| ops->frequency = freq; |
| tick_operations = *ops; |
| get_tick_patch(); |
| } |
| |
| void __init time_init_early(void) |
| { |
| if (tlb_type == spitfire) { |
| if (is_hummingbird()) { |
| init_tick_ops(&hbtick_operations); |
| clocksource_tick.archdata.vclock_mode = VCLOCK_NONE; |
| } else { |
| init_tick_ops(&tick_operations); |
| clocksource_tick.archdata.vclock_mode = VCLOCK_TICK; |
| } |
| } else { |
| init_tick_ops(&stick_operations); |
| clocksource_tick.archdata.vclock_mode = VCLOCK_STICK; |
| } |
| } |
| |
| void __init time_init(void) |
| { |
| unsigned long freq; |
| |
| freq = tick_operations.frequency; |
| tb_ticks_per_usec = freq / USEC_PER_SEC; |
| |
| clocksource_tick.name = tick_operations.name; |
| clocksource_tick.read = clocksource_tick_read; |
| |
| clocksource_register_hz(&clocksource_tick, freq); |
| printk("clocksource: mult[%x] shift[%d]\n", |
| clocksource_tick.mult, clocksource_tick.shift); |
| |
| sparc64_clockevent.name = tick_operations.name; |
| clockevents_calc_mult_shift(&sparc64_clockevent, freq, 4); |
| |
| sparc64_clockevent.max_delta_ns = |
| clockevent_delta2ns(0x7fffffffffffffffUL, &sparc64_clockevent); |
| sparc64_clockevent.max_delta_ticks = 0x7fffffffffffffffUL; |
| sparc64_clockevent.min_delta_ns = |
| clockevent_delta2ns(0xF, &sparc64_clockevent); |
| sparc64_clockevent.min_delta_ticks = 0xF; |
| |
| printk("clockevent: mult[%x] shift[%d]\n", |
| sparc64_clockevent.mult, sparc64_clockevent.shift); |
| |
| setup_sparc64_timer(); |
| } |
| |
| unsigned long long sched_clock(void) |
| { |
| unsigned long quotient = tick_operations.ticks_per_nsec_quotient; |
| unsigned long offset = tick_operations.offset; |
| |
| /* Use barrier so the compiler emits the loads first and overlaps load |
| * latency with reading tick, because reading %tick/%stick is a |
| * post-sync instruction that will flush and restart subsequent |
| * instructions after it commits. |
| */ |
| barrier(); |
| |
| return ((get_tick() * quotient) >> SPARC64_NSEC_PER_CYC_SHIFT) - offset; |
| } |
| |
| int read_current_timer(unsigned long *timer_val) |
| { |
| *timer_val = get_tick(); |
| return 0; |
| } |