| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * |
| * Bluetooth support for Broadcom devices |
| * |
| * Copyright (C) 2015 Intel Corporation |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/firmware.h> |
| #include <asm/unaligned.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| |
| #include "btbcm.h" |
| |
| #define VERSION "0.1" |
| |
| #define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}}) |
| #define BDADDR_BCM20702A1 (&(bdaddr_t) {{0x00, 0x00, 0xa0, 0x02, 0x70, 0x20}}) |
| #define BDADDR_BCM2076B1 (&(bdaddr_t) {{0x79, 0x56, 0x00, 0xa0, 0x76, 0x20}}) |
| #define BDADDR_BCM43430A0 (&(bdaddr_t) {{0xac, 0x1f, 0x12, 0xa0, 0x43, 0x43}}) |
| #define BDADDR_BCM4324B3 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb3, 0x24, 0x43}}) |
| #define BDADDR_BCM4330B1 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb1, 0x30, 0x43}}) |
| #define BDADDR_BCM4334B0 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb0, 0x34, 0x43}}) |
| #define BDADDR_BCM4345C5 (&(bdaddr_t) {{0xac, 0x1f, 0x00, 0xc5, 0x45, 0x43}}) |
| #define BDADDR_BCM43341B (&(bdaddr_t) {{0xac, 0x1f, 0x00, 0x1b, 0x34, 0x43}}) |
| |
| #define BCM_FW_NAME_LEN 64 |
| #define BCM_FW_NAME_COUNT_MAX 2 |
| /* For kmalloc-ing the fw-name array instead of putting it on the stack */ |
| typedef char bcm_fw_name[BCM_FW_NAME_LEN]; |
| |
| int btbcm_check_bdaddr(struct hci_dev *hdev) |
| { |
| struct hci_rp_read_bd_addr *bda; |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| int err = PTR_ERR(skb); |
| |
| bt_dev_err(hdev, "BCM: Reading device address failed (%d)", err); |
| return err; |
| } |
| |
| if (skb->len != sizeof(*bda)) { |
| bt_dev_err(hdev, "BCM: Device address length mismatch"); |
| kfree_skb(skb); |
| return -EIO; |
| } |
| |
| bda = (struct hci_rp_read_bd_addr *)skb->data; |
| |
| /* Check if the address indicates a controller with either an |
| * invalid or default address. In both cases the device needs |
| * to be marked as not having a valid address. |
| * |
| * The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller |
| * with no configured address. |
| * |
| * The address 20:70:02:A0:00:00 indicates a BCM20702A1 controller |
| * with no configured address. |
| * |
| * The address 20:76:A0:00:56:79 indicates a BCM2076B1 controller |
| * with no configured address. |
| * |
| * The address 43:24:B3:00:00:00 indicates a BCM4324B3 controller |
| * with waiting for configuration state. |
| * |
| * The address 43:30:B1:00:00:00 indicates a BCM4330B1 controller |
| * with waiting for configuration state. |
| * |
| * The address 43:43:A0:12:1F:AC indicates a BCM43430A0 controller |
| * with no configured address. |
| */ |
| if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0) || |
| !bacmp(&bda->bdaddr, BDADDR_BCM20702A1) || |
| !bacmp(&bda->bdaddr, BDADDR_BCM2076B1) || |
| !bacmp(&bda->bdaddr, BDADDR_BCM4324B3) || |
| !bacmp(&bda->bdaddr, BDADDR_BCM4330B1) || |
| !bacmp(&bda->bdaddr, BDADDR_BCM4334B0) || |
| !bacmp(&bda->bdaddr, BDADDR_BCM4345C5) || |
| !bacmp(&bda->bdaddr, BDADDR_BCM43430A0) || |
| !bacmp(&bda->bdaddr, BDADDR_BCM43341B)) { |
| bt_dev_info(hdev, "BCM: Using default device address (%pMR)", |
| &bda->bdaddr); |
| set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); |
| } |
| |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btbcm_check_bdaddr); |
| |
| int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) |
| { |
| struct sk_buff *skb; |
| int err; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc01, 6, bdaddr, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| err = PTR_ERR(skb); |
| bt_dev_err(hdev, "BCM: Change address command failed (%d)", err); |
| return err; |
| } |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btbcm_set_bdaddr); |
| |
| int btbcm_read_pcm_int_params(struct hci_dev *hdev, |
| struct bcm_set_pcm_int_params *params) |
| { |
| struct sk_buff *skb; |
| int err = 0; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc1d, 0, NULL, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| err = PTR_ERR(skb); |
| bt_dev_err(hdev, "BCM: Read PCM int params failed (%d)", err); |
| return err; |
| } |
| |
| if (skb->len != 6 || skb->data[0]) { |
| bt_dev_err(hdev, "BCM: Read PCM int params length mismatch"); |
| kfree_skb(skb); |
| return -EIO; |
| } |
| |
| if (params) |
| memcpy(params, skb->data + 1, 5); |
| |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btbcm_read_pcm_int_params); |
| |
| int btbcm_write_pcm_int_params(struct hci_dev *hdev, |
| const struct bcm_set_pcm_int_params *params) |
| { |
| struct sk_buff *skb; |
| int err; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc1c, 5, params, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| err = PTR_ERR(skb); |
| bt_dev_err(hdev, "BCM: Write PCM int params failed (%d)", err); |
| return err; |
| } |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btbcm_write_pcm_int_params); |
| |
| int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw) |
| { |
| const struct hci_command_hdr *cmd; |
| const u8 *fw_ptr; |
| size_t fw_size; |
| struct sk_buff *skb; |
| u16 opcode; |
| int err = 0; |
| |
| /* Start Download */ |
| skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| err = PTR_ERR(skb); |
| bt_dev_err(hdev, "BCM: Download Minidrv command failed (%d)", |
| err); |
| goto done; |
| } |
| kfree_skb(skb); |
| |
| /* 50 msec delay after Download Minidrv completes */ |
| msleep(50); |
| |
| fw_ptr = fw->data; |
| fw_size = fw->size; |
| |
| while (fw_size >= sizeof(*cmd)) { |
| const u8 *cmd_param; |
| |
| cmd = (struct hci_command_hdr *)fw_ptr; |
| fw_ptr += sizeof(*cmd); |
| fw_size -= sizeof(*cmd); |
| |
| if (fw_size < cmd->plen) { |
| bt_dev_err(hdev, "BCM: Patch is corrupted"); |
| err = -EINVAL; |
| goto done; |
| } |
| |
| cmd_param = fw_ptr; |
| fw_ptr += cmd->plen; |
| fw_size -= cmd->plen; |
| |
| opcode = le16_to_cpu(cmd->opcode); |
| |
| skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| err = PTR_ERR(skb); |
| bt_dev_err(hdev, "BCM: Patch command %04x failed (%d)", |
| opcode, err); |
| goto done; |
| } |
| kfree_skb(skb); |
| } |
| |
| /* 250 msec delay after Launch Ram completes */ |
| msleep(250); |
| |
| done: |
| return err; |
| } |
| EXPORT_SYMBOL(btbcm_patchram); |
| |
| static int btbcm_reset(struct hci_dev *hdev) |
| { |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| int err = PTR_ERR(skb); |
| |
| bt_dev_err(hdev, "BCM: Reset failed (%d)", err); |
| return err; |
| } |
| kfree_skb(skb); |
| |
| /* 100 msec delay for module to complete reset process */ |
| msleep(100); |
| |
| return 0; |
| } |
| |
| static struct sk_buff *btbcm_read_local_name(struct hci_dev *hdev) |
| { |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_NAME, 0, NULL, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "BCM: Reading local name failed (%ld)", |
| PTR_ERR(skb)); |
| return skb; |
| } |
| |
| if (skb->len != sizeof(struct hci_rp_read_local_name)) { |
| bt_dev_err(hdev, "BCM: Local name length mismatch"); |
| kfree_skb(skb); |
| return ERR_PTR(-EIO); |
| } |
| |
| return skb; |
| } |
| |
| static struct sk_buff *btbcm_read_local_version(struct hci_dev *hdev) |
| { |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "BCM: Reading local version info failed (%ld)", |
| PTR_ERR(skb)); |
| return skb; |
| } |
| |
| if (skb->len != sizeof(struct hci_rp_read_local_version)) { |
| bt_dev_err(hdev, "BCM: Local version length mismatch"); |
| kfree_skb(skb); |
| return ERR_PTR(-EIO); |
| } |
| |
| return skb; |
| } |
| |
| static struct sk_buff *btbcm_read_verbose_config(struct hci_dev *hdev) |
| { |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc79, 0, NULL, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "BCM: Read verbose config info failed (%ld)", |
| PTR_ERR(skb)); |
| return skb; |
| } |
| |
| if (skb->len != 7) { |
| bt_dev_err(hdev, "BCM: Verbose config length mismatch"); |
| kfree_skb(skb); |
| return ERR_PTR(-EIO); |
| } |
| |
| return skb; |
| } |
| |
| static struct sk_buff *btbcm_read_controller_features(struct hci_dev *hdev) |
| { |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc6e, 0, NULL, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "BCM: Read controller features failed (%ld)", |
| PTR_ERR(skb)); |
| return skb; |
| } |
| |
| if (skb->len != 9) { |
| bt_dev_err(hdev, "BCM: Controller features length mismatch"); |
| kfree_skb(skb); |
| return ERR_PTR(-EIO); |
| } |
| |
| return skb; |
| } |
| |
| static struct sk_buff *btbcm_read_usb_product(struct hci_dev *hdev) |
| { |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc5a, 0, NULL, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| bt_dev_err(hdev, "BCM: Read USB product info failed (%ld)", |
| PTR_ERR(skb)); |
| return skb; |
| } |
| |
| if (skb->len != 5) { |
| bt_dev_err(hdev, "BCM: USB product length mismatch"); |
| kfree_skb(skb); |
| return ERR_PTR(-EIO); |
| } |
| |
| return skb; |
| } |
| |
| static int btbcm_read_info(struct hci_dev *hdev) |
| { |
| struct sk_buff *skb; |
| |
| /* Read Verbose Config Version Info */ |
| skb = btbcm_read_verbose_config(hdev); |
| if (IS_ERR(skb)) |
| return PTR_ERR(skb); |
| |
| bt_dev_info(hdev, "BCM: chip id %u", skb->data[1]); |
| kfree_skb(skb); |
| |
| /* Read Controller Features */ |
| skb = btbcm_read_controller_features(hdev); |
| if (IS_ERR(skb)) |
| return PTR_ERR(skb); |
| |
| bt_dev_info(hdev, "BCM: features 0x%2.2x", skb->data[1]); |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| |
| static int btbcm_print_local_name(struct hci_dev *hdev) |
| { |
| struct sk_buff *skb; |
| |
| /* Read Local Name */ |
| skb = btbcm_read_local_name(hdev); |
| if (IS_ERR(skb)) |
| return PTR_ERR(skb); |
| |
| bt_dev_info(hdev, "%s", (char *)(skb->data + 1)); |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| |
| struct bcm_subver_table { |
| u16 subver; |
| const char *name; |
| }; |
| |
| static const struct bcm_subver_table bcm_uart_subver_table[] = { |
| { 0x4103, "BCM4330B1" }, /* 002.001.003 */ |
| { 0x410d, "BCM4334B0" }, /* 002.001.013 */ |
| { 0x410e, "BCM43341B0" }, /* 002.001.014 */ |
| { 0x4204, "BCM2076B1" }, /* 002.002.004 */ |
| { 0x4406, "BCM4324B3" }, /* 002.004.006 */ |
| { 0x4606, "BCM4324B5" }, /* 002.006.006 */ |
| { 0x6109, "BCM4335C0" }, /* 003.001.009 */ |
| { 0x610c, "BCM4354" }, /* 003.001.012 */ |
| { 0x2122, "BCM4343A0" }, /* 001.001.034 */ |
| { 0x2209, "BCM43430A1" }, /* 001.002.009 */ |
| { 0x6119, "BCM4345C0" }, /* 003.001.025 */ |
| { 0x6606, "BCM4345C5" }, /* 003.006.006 */ |
| { 0x230f, "BCM4356A2" }, /* 001.003.015 */ |
| { 0x220e, "BCM20702A1" }, /* 001.002.014 */ |
| { 0x4217, "BCM4329B1" }, /* 002.002.023 */ |
| { 0x6106, "BCM4359C0" }, /* 003.001.006 */ |
| { 0x4106, "BCM4335A0" }, /* 002.001.006 */ |
| { } |
| }; |
| |
| static const struct bcm_subver_table bcm_usb_subver_table[] = { |
| { 0x2105, "BCM20703A1" }, /* 001.001.005 */ |
| { 0x210b, "BCM43142A0" }, /* 001.001.011 */ |
| { 0x2112, "BCM4314A0" }, /* 001.001.018 */ |
| { 0x2118, "BCM20702A0" }, /* 001.001.024 */ |
| { 0x2126, "BCM4335A0" }, /* 001.001.038 */ |
| { 0x220e, "BCM20702A1" }, /* 001.002.014 */ |
| { 0x230f, "BCM4356A2" }, /* 001.003.015 */ |
| { 0x4106, "BCM4335B0" }, /* 002.001.006 */ |
| { 0x410e, "BCM20702B0" }, /* 002.001.014 */ |
| { 0x6109, "BCM4335C0" }, /* 003.001.009 */ |
| { 0x610c, "BCM4354" }, /* 003.001.012 */ |
| { 0x6607, "BCM4350C5" }, /* 003.006.007 */ |
| { } |
| }; |
| |
| int btbcm_initialize(struct hci_dev *hdev, bool *fw_load_done) |
| { |
| u16 subver, rev, pid, vid; |
| struct sk_buff *skb; |
| struct hci_rp_read_local_version *ver; |
| const struct bcm_subver_table *bcm_subver_table; |
| const char *hw_name = NULL; |
| char postfix[16] = ""; |
| int fw_name_count = 0; |
| bcm_fw_name *fw_name; |
| const struct firmware *fw; |
| int i, err; |
| |
| /* Reset */ |
| err = btbcm_reset(hdev); |
| if (err) |
| return err; |
| |
| /* Read Local Version Info */ |
| skb = btbcm_read_local_version(hdev); |
| if (IS_ERR(skb)) |
| return PTR_ERR(skb); |
| |
| ver = (struct hci_rp_read_local_version *)skb->data; |
| rev = le16_to_cpu(ver->hci_rev); |
| subver = le16_to_cpu(ver->lmp_subver); |
| kfree_skb(skb); |
| |
| /* Read controller information */ |
| if (!(*fw_load_done)) { |
| err = btbcm_read_info(hdev); |
| if (err) |
| return err; |
| } |
| err = btbcm_print_local_name(hdev); |
| if (err) |
| return err; |
| |
| bcm_subver_table = (hdev->bus == HCI_USB) ? bcm_usb_subver_table : |
| bcm_uart_subver_table; |
| |
| for (i = 0; bcm_subver_table[i].name; i++) { |
| if (subver == bcm_subver_table[i].subver) { |
| hw_name = bcm_subver_table[i].name; |
| break; |
| } |
| } |
| |
| bt_dev_info(hdev, "%s (%3.3u.%3.3u.%3.3u) build %4.4u", |
| hw_name ? hw_name : "BCM", (subver & 0xe000) >> 13, |
| (subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff); |
| |
| if (*fw_load_done) |
| return 0; |
| |
| if (hdev->bus == HCI_USB) { |
| /* Read USB Product Info */ |
| skb = btbcm_read_usb_product(hdev); |
| if (IS_ERR(skb)) |
| return PTR_ERR(skb); |
| |
| vid = get_unaligned_le16(skb->data + 1); |
| pid = get_unaligned_le16(skb->data + 3); |
| kfree_skb(skb); |
| |
| snprintf(postfix, sizeof(postfix), "-%4.4x-%4.4x", vid, pid); |
| } |
| |
| fw_name = kmalloc(BCM_FW_NAME_COUNT_MAX * BCM_FW_NAME_LEN, GFP_KERNEL); |
| if (!fw_name) |
| return -ENOMEM; |
| |
| if (hw_name) { |
| snprintf(fw_name[fw_name_count], BCM_FW_NAME_LEN, |
| "brcm/%s%s.hcd", hw_name, postfix); |
| fw_name_count++; |
| } |
| |
| snprintf(fw_name[fw_name_count], BCM_FW_NAME_LEN, |
| "brcm/BCM%s.hcd", postfix); |
| fw_name_count++; |
| |
| for (i = 0; i < fw_name_count; i++) { |
| err = firmware_request_nowarn(&fw, fw_name[i], &hdev->dev); |
| if (err == 0) { |
| bt_dev_info(hdev, "%s '%s' Patch", |
| hw_name ? hw_name : "BCM", fw_name[i]); |
| *fw_load_done = true; |
| break; |
| } |
| } |
| |
| if (*fw_load_done) { |
| err = btbcm_patchram(hdev, fw); |
| if (err) |
| bt_dev_info(hdev, "BCM: Patch failed (%d)", err); |
| |
| release_firmware(fw); |
| } else { |
| bt_dev_err(hdev, "BCM: firmware Patch file not found, tried:"); |
| for (i = 0; i < fw_name_count; i++) |
| bt_dev_err(hdev, "BCM: '%s'", fw_name[i]); |
| } |
| |
| kfree(fw_name); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btbcm_initialize); |
| |
| int btbcm_finalize(struct hci_dev *hdev, bool *fw_load_done) |
| { |
| int err; |
| |
| /* Re-initialize if necessary */ |
| if (*fw_load_done) { |
| err = btbcm_initialize(hdev, fw_load_done); |
| if (err) |
| return err; |
| } |
| |
| btbcm_check_bdaddr(hdev); |
| |
| set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btbcm_finalize); |
| |
| int btbcm_setup_patchram(struct hci_dev *hdev) |
| { |
| bool fw_load_done = false; |
| int err; |
| |
| /* Initialize */ |
| err = btbcm_initialize(hdev, &fw_load_done); |
| if (err) |
| return err; |
| |
| /* Re-initialize after loading Patch */ |
| return btbcm_finalize(hdev, &fw_load_done); |
| } |
| EXPORT_SYMBOL_GPL(btbcm_setup_patchram); |
| |
| int btbcm_setup_apple(struct hci_dev *hdev) |
| { |
| struct sk_buff *skb; |
| int err; |
| |
| /* Reset */ |
| err = btbcm_reset(hdev); |
| if (err) |
| return err; |
| |
| /* Read Verbose Config Version Info */ |
| skb = btbcm_read_verbose_config(hdev); |
| if (!IS_ERR(skb)) { |
| bt_dev_info(hdev, "BCM: chip id %u build %4.4u", |
| skb->data[1], get_unaligned_le16(skb->data + 5)); |
| kfree_skb(skb); |
| } |
| |
| /* Read USB Product Info */ |
| skb = btbcm_read_usb_product(hdev); |
| if (!IS_ERR(skb)) { |
| bt_dev_info(hdev, "BCM: product %4.4x:%4.4x", |
| get_unaligned_le16(skb->data + 1), |
| get_unaligned_le16(skb->data + 3)); |
| kfree_skb(skb); |
| } |
| |
| /* Read Controller Features */ |
| skb = btbcm_read_controller_features(hdev); |
| if (!IS_ERR(skb)) { |
| bt_dev_info(hdev, "BCM: features 0x%2.2x", skb->data[1]); |
| kfree_skb(skb); |
| } |
| |
| /* Read Local Name */ |
| skb = btbcm_read_local_name(hdev); |
| if (!IS_ERR(skb)) { |
| bt_dev_info(hdev, "%s", (char *)(skb->data + 1)); |
| kfree_skb(skb); |
| } |
| |
| set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(btbcm_setup_apple); |
| |
| MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); |
| MODULE_DESCRIPTION("Bluetooth support for Broadcom devices ver " VERSION); |
| MODULE_VERSION(VERSION); |
| MODULE_LICENSE("GPL"); |