| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * TI/National Semiconductor LP3943 GPIO driver |
| * |
| * Copyright 2013 Texas Instruments |
| * |
| * Author: Milo Kim <milo.kim@ti.com> |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/err.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/i2c.h> |
| #include <linux/mfd/lp3943.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| enum lp3943_gpios { |
| LP3943_GPIO1, |
| LP3943_GPIO2, |
| LP3943_GPIO3, |
| LP3943_GPIO4, |
| LP3943_GPIO5, |
| LP3943_GPIO6, |
| LP3943_GPIO7, |
| LP3943_GPIO8, |
| LP3943_GPIO9, |
| LP3943_GPIO10, |
| LP3943_GPIO11, |
| LP3943_GPIO12, |
| LP3943_GPIO13, |
| LP3943_GPIO14, |
| LP3943_GPIO15, |
| LP3943_GPIO16, |
| LP3943_MAX_GPIO, |
| }; |
| |
| struct lp3943_gpio { |
| struct gpio_chip chip; |
| struct lp3943 *lp3943; |
| u16 input_mask; /* 1 = GPIO is input direction, 0 = output */ |
| }; |
| |
| static int lp3943_gpio_request(struct gpio_chip *chip, unsigned offset) |
| { |
| struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip); |
| struct lp3943 *lp3943 = lp3943_gpio->lp3943; |
| |
| /* Return an error if the pin is already assigned */ |
| if (test_and_set_bit(offset, &lp3943->pin_used)) |
| return -EBUSY; |
| |
| return 0; |
| } |
| |
| static void lp3943_gpio_free(struct gpio_chip *chip, unsigned offset) |
| { |
| struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip); |
| struct lp3943 *lp3943 = lp3943_gpio->lp3943; |
| |
| clear_bit(offset, &lp3943->pin_used); |
| } |
| |
| static int lp3943_gpio_set_mode(struct lp3943_gpio *lp3943_gpio, u8 offset, |
| u8 val) |
| { |
| struct lp3943 *lp3943 = lp3943_gpio->lp3943; |
| const struct lp3943_reg_cfg *mux = lp3943->mux_cfg; |
| |
| return lp3943_update_bits(lp3943, mux[offset].reg, mux[offset].mask, |
| val << mux[offset].shift); |
| } |
| |
| static int lp3943_gpio_direction_input(struct gpio_chip *chip, unsigned offset) |
| { |
| struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip); |
| |
| lp3943_gpio->input_mask |= BIT(offset); |
| |
| return lp3943_gpio_set_mode(lp3943_gpio, offset, LP3943_GPIO_IN); |
| } |
| |
| static int lp3943_get_gpio_in_status(struct lp3943_gpio *lp3943_gpio, |
| struct gpio_chip *chip, unsigned offset) |
| { |
| u8 addr, read; |
| int err; |
| |
| switch (offset) { |
| case LP3943_GPIO1 ... LP3943_GPIO8: |
| addr = LP3943_REG_GPIO_A; |
| break; |
| case LP3943_GPIO9 ... LP3943_GPIO16: |
| addr = LP3943_REG_GPIO_B; |
| offset = offset - 8; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| err = lp3943_read_byte(lp3943_gpio->lp3943, addr, &read); |
| if (err) |
| return err; |
| |
| return !!(read & BIT(offset)); |
| } |
| |
| static int lp3943_get_gpio_out_status(struct lp3943_gpio *lp3943_gpio, |
| struct gpio_chip *chip, unsigned offset) |
| { |
| struct lp3943 *lp3943 = lp3943_gpio->lp3943; |
| const struct lp3943_reg_cfg *mux = lp3943->mux_cfg; |
| u8 read; |
| int err; |
| |
| err = lp3943_read_byte(lp3943, mux[offset].reg, &read); |
| if (err) |
| return err; |
| |
| read = (read & mux[offset].mask) >> mux[offset].shift; |
| |
| if (read == LP3943_GPIO_OUT_HIGH) |
| return 1; |
| else if (read == LP3943_GPIO_OUT_LOW) |
| return 0; |
| else |
| return -EINVAL; |
| } |
| |
| static int lp3943_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip); |
| |
| /* |
| * Limitation: |
| * LP3943 doesn't have the GPIO direction register. It provides |
| * only input and output status registers. |
| * So, direction info is required to handle the 'get' operation. |
| * This variable is updated whenever the direction is changed and |
| * it is used here. |
| */ |
| |
| if (lp3943_gpio->input_mask & BIT(offset)) |
| return lp3943_get_gpio_in_status(lp3943_gpio, chip, offset); |
| else |
| return lp3943_get_gpio_out_status(lp3943_gpio, chip, offset); |
| } |
| |
| static void lp3943_gpio_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip); |
| u8 data; |
| |
| if (value) |
| data = LP3943_GPIO_OUT_HIGH; |
| else |
| data = LP3943_GPIO_OUT_LOW; |
| |
| lp3943_gpio_set_mode(lp3943_gpio, offset, data); |
| } |
| |
| static int lp3943_gpio_direction_output(struct gpio_chip *chip, unsigned offset, |
| int value) |
| { |
| struct lp3943_gpio *lp3943_gpio = gpiochip_get_data(chip); |
| |
| lp3943_gpio_set(chip, offset, value); |
| lp3943_gpio->input_mask &= ~BIT(offset); |
| |
| return 0; |
| } |
| |
| static const struct gpio_chip lp3943_gpio_chip = { |
| .label = "lp3943", |
| .owner = THIS_MODULE, |
| .request = lp3943_gpio_request, |
| .free = lp3943_gpio_free, |
| .direction_input = lp3943_gpio_direction_input, |
| .get = lp3943_gpio_get, |
| .direction_output = lp3943_gpio_direction_output, |
| .set = lp3943_gpio_set, |
| .base = -1, |
| .ngpio = LP3943_MAX_GPIO, |
| .can_sleep = 1, |
| }; |
| |
| static int lp3943_gpio_probe(struct platform_device *pdev) |
| { |
| struct lp3943 *lp3943 = dev_get_drvdata(pdev->dev.parent); |
| struct lp3943_gpio *lp3943_gpio; |
| |
| lp3943_gpio = devm_kzalloc(&pdev->dev, sizeof(*lp3943_gpio), |
| GFP_KERNEL); |
| if (!lp3943_gpio) |
| return -ENOMEM; |
| |
| lp3943_gpio->lp3943 = lp3943; |
| lp3943_gpio->chip = lp3943_gpio_chip; |
| lp3943_gpio->chip.parent = &pdev->dev; |
| |
| platform_set_drvdata(pdev, lp3943_gpio); |
| |
| return devm_gpiochip_add_data(&pdev->dev, &lp3943_gpio->chip, |
| lp3943_gpio); |
| } |
| |
| static const struct of_device_id lp3943_gpio_of_match[] = { |
| { .compatible = "ti,lp3943-gpio", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, lp3943_gpio_of_match); |
| |
| static struct platform_driver lp3943_gpio_driver = { |
| .probe = lp3943_gpio_probe, |
| .driver = { |
| .name = "lp3943-gpio", |
| .of_match_table = lp3943_gpio_of_match, |
| }, |
| }; |
| module_platform_driver(lp3943_gpio_driver); |
| |
| MODULE_DESCRIPTION("LP3943 GPIO driver"); |
| MODULE_ALIAS("platform:lp3943-gpio"); |
| MODULE_AUTHOR("Milo Kim"); |
| MODULE_LICENSE("GPL"); |