| /* |
| * generic/default IDE host driver |
| * |
| * Copyright (C) 2004, 2008-2009 Bartlomiej Zolnierkiewicz |
| * This code was split off from ide.c. See it for original copyrights. |
| * |
| * May be copied or modified under the terms of the GNU General Public License. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/ide.h> |
| #include <linux/pci_ids.h> |
| |
| /* FIXME: convert arm to use ide_platform host driver */ |
| #ifdef CONFIG_ARM |
| #include <asm/irq.h> |
| #endif |
| |
| #define DRV_NAME "ide_generic" |
| |
| static int probe_mask; |
| module_param(probe_mask, int, 0); |
| MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports"); |
| |
| static const struct ide_port_info ide_generic_port_info = { |
| .host_flags = IDE_HFLAG_NO_DMA, |
| .chipset = ide_generic, |
| }; |
| |
| #ifdef CONFIG_ARM |
| static const u16 legacy_bases[] = { 0x1f0 }; |
| static const int legacy_irqs[] = { IRQ_HARDDISK }; |
| #elif defined(CONFIG_ALPHA) |
| static const u16 legacy_bases[] = { 0x1f0, 0x170, 0x1e8, 0x168 }; |
| static const int legacy_irqs[] = { 14, 15, 11, 10 }; |
| #else |
| static const u16 legacy_bases[] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 }; |
| static const int legacy_irqs[] = { 14, 15, 11, 10, 8, 12 }; |
| #endif |
| |
| static void ide_generic_check_pci_legacy_iobases(int *primary, int *secondary) |
| { |
| #ifdef CONFIG_PCI |
| struct pci_dev *p = NULL; |
| u16 val; |
| |
| for_each_pci_dev(p) { |
| if (pci_resource_start(p, 0) == 0x1f0) |
| *primary = 1; |
| if (pci_resource_start(p, 2) == 0x170) |
| *secondary = 1; |
| |
| /* Cyrix CS55{1,2}0 pre SFF MWDMA ATA on the bridge */ |
| if (p->vendor == PCI_VENDOR_ID_CYRIX && |
| (p->device == PCI_DEVICE_ID_CYRIX_5510 || |
| p->device == PCI_DEVICE_ID_CYRIX_5520)) |
| *primary = *secondary = 1; |
| |
| /* Intel MPIIX - PIO ATA on non PCI side of bridge */ |
| if (p->vendor == PCI_VENDOR_ID_INTEL && |
| p->device == PCI_DEVICE_ID_INTEL_82371MX) { |
| pci_read_config_word(p, 0x6C, &val); |
| if (val & 0x8000) { |
| /* ATA port enabled */ |
| if (val & 0x4000) |
| *secondary = 1; |
| else |
| *primary = 1; |
| } |
| } |
| } |
| #endif |
| } |
| |
| static int __init ide_generic_init(void) |
| { |
| struct ide_hw hw, *hws[] = { &hw }; |
| unsigned long io_addr; |
| int i, rc = 0, primary = 0, secondary = 0; |
| |
| ide_generic_check_pci_legacy_iobases(&primary, &secondary); |
| |
| if (!probe_mask) { |
| printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" " |
| "module parameter for probing all legacy ISA IDE ports\n"); |
| |
| if (primary == 0) |
| probe_mask |= 0x1; |
| |
| if (secondary == 0) |
| probe_mask |= 0x2; |
| } else |
| printk(KERN_INFO DRV_NAME ": enforcing probing of I/O ports " |
| "upon user request\n"); |
| |
| for (i = 0; i < ARRAY_SIZE(legacy_bases); i++) { |
| io_addr = legacy_bases[i]; |
| |
| if ((probe_mask & (1 << i)) && io_addr) { |
| if (!request_region(io_addr, 8, DRV_NAME)) { |
| printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX " |
| "not free.\n", |
| DRV_NAME, io_addr, io_addr + 7); |
| rc = -EBUSY; |
| continue; |
| } |
| |
| if (!request_region(io_addr + 0x206, 1, DRV_NAME)) { |
| printk(KERN_ERR "%s: I/O resource 0x%lX " |
| "not free.\n", |
| DRV_NAME, io_addr + 0x206); |
| release_region(io_addr, 8); |
| rc = -EBUSY; |
| continue; |
| } |
| |
| memset(&hw, 0, sizeof(hw)); |
| ide_std_init_ports(&hw, io_addr, io_addr + 0x206); |
| #ifdef CONFIG_IA64 |
| hw.irq = isa_irq_to_vector(legacy_irqs[i]); |
| #else |
| hw.irq = legacy_irqs[i]; |
| #endif |
| rc = ide_host_add(&ide_generic_port_info, hws, 1, NULL); |
| if (rc) { |
| release_region(io_addr + 0x206, 1); |
| release_region(io_addr, 8); |
| } |
| } |
| } |
| |
| return rc; |
| } |
| |
| module_init(ide_generic_init); |
| |
| MODULE_LICENSE("GPL"); |