| // SPDX-License-Identifier: GPL-2.0 |
| #include <linux/bug.h> |
| #include <linux/kernel.h> |
| #include <linux/bitops.h> |
| #include <linux/math64.h> |
| #include <linux/log2.h> |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/units.h> |
| |
| #include "qcom-vadc-common.h" |
| |
| /* Voltage to temperature */ |
| static const struct vadc_map_pt adcmap_100k_104ef_104fb[] = { |
| {1758, -40}, |
| {1742, -35}, |
| {1719, -30}, |
| {1691, -25}, |
| {1654, -20}, |
| {1608, -15}, |
| {1551, -10}, |
| {1483, -5}, |
| {1404, 0}, |
| {1315, 5}, |
| {1218, 10}, |
| {1114, 15}, |
| {1007, 20}, |
| {900, 25}, |
| {795, 30}, |
| {696, 35}, |
| {605, 40}, |
| {522, 45}, |
| {448, 50}, |
| {383, 55}, |
| {327, 60}, |
| {278, 65}, |
| {237, 70}, |
| {202, 75}, |
| {172, 80}, |
| {146, 85}, |
| {125, 90}, |
| {107, 95}, |
| {92, 100}, |
| {79, 105}, |
| {68, 110}, |
| {59, 115}, |
| {51, 120}, |
| {44, 125} |
| }; |
| |
| /* |
| * Voltage to temperature table for 100k pull up for NTCG104EF104 with |
| * 1.875V reference. |
| */ |
| static const struct vadc_map_pt adcmap_100k_104ef_104fb_1875_vref[] = { |
| { 1831, -40000 }, |
| { 1814, -35000 }, |
| { 1791, -30000 }, |
| { 1761, -25000 }, |
| { 1723, -20000 }, |
| { 1675, -15000 }, |
| { 1616, -10000 }, |
| { 1545, -5000 }, |
| { 1463, 0 }, |
| { 1370, 5000 }, |
| { 1268, 10000 }, |
| { 1160, 15000 }, |
| { 1049, 20000 }, |
| { 937, 25000 }, |
| { 828, 30000 }, |
| { 726, 35000 }, |
| { 630, 40000 }, |
| { 544, 45000 }, |
| { 467, 50000 }, |
| { 399, 55000 }, |
| { 340, 60000 }, |
| { 290, 65000 }, |
| { 247, 70000 }, |
| { 209, 75000 }, |
| { 179, 80000 }, |
| { 153, 85000 }, |
| { 130, 90000 }, |
| { 112, 95000 }, |
| { 96, 100000 }, |
| { 82, 105000 }, |
| { 71, 110000 }, |
| { 62, 115000 }, |
| { 53, 120000 }, |
| { 46, 125000 }, |
| }; |
| |
| static const struct vadc_map_pt adcmap7_die_temp[] = { |
| { 433700, 1967}, |
| { 473100, 1964}, |
| { 512400, 1957}, |
| { 551500, 1949}, |
| { 590500, 1940}, |
| { 629300, 1930}, |
| { 667900, 1921}, |
| { 706400, 1910}, |
| { 744600, 1896}, |
| { 782500, 1878}, |
| { 820100, 1859}, |
| { 857300, 0}, |
| }; |
| |
| /* |
| * Resistance to temperature table for 100k pull up for NTCG104EF104. |
| */ |
| static const struct vadc_map_pt adcmap7_100k[] = { |
| { 4250657, -40960 }, |
| { 3962085, -39936 }, |
| { 3694875, -38912 }, |
| { 3447322, -37888 }, |
| { 3217867, -36864 }, |
| { 3005082, -35840 }, |
| { 2807660, -34816 }, |
| { 2624405, -33792 }, |
| { 2454218, -32768 }, |
| { 2296094, -31744 }, |
| { 2149108, -30720 }, |
| { 2012414, -29696 }, |
| { 1885232, -28672 }, |
| { 1766846, -27648 }, |
| { 1656598, -26624 }, |
| { 1553884, -25600 }, |
| { 1458147, -24576 }, |
| { 1368873, -23552 }, |
| { 1285590, -22528 }, |
| { 1207863, -21504 }, |
| { 1135290, -20480 }, |
| { 1067501, -19456 }, |
| { 1004155, -18432 }, |
| { 944935, -17408 }, |
| { 889550, -16384 }, |
| { 837731, -15360 }, |
| { 789229, -14336 }, |
| { 743813, -13312 }, |
| { 701271, -12288 }, |
| { 661405, -11264 }, |
| { 624032, -10240 }, |
| { 588982, -9216 }, |
| { 556100, -8192 }, |
| { 525239, -7168 }, |
| { 496264, -6144 }, |
| { 469050, -5120 }, |
| { 443480, -4096 }, |
| { 419448, -3072 }, |
| { 396851, -2048 }, |
| { 375597, -1024 }, |
| { 355598, 0 }, |
| { 336775, 1024 }, |
| { 319052, 2048 }, |
| { 302359, 3072 }, |
| { 286630, 4096 }, |
| { 271806, 5120 }, |
| { 257829, 6144 }, |
| { 244646, 7168 }, |
| { 232209, 8192 }, |
| { 220471, 9216 }, |
| { 209390, 10240 }, |
| { 198926, 11264 }, |
| { 189040, 12288 }, |
| { 179698, 13312 }, |
| { 170868, 14336 }, |
| { 162519, 15360 }, |
| { 154622, 16384 }, |
| { 147150, 17408 }, |
| { 140079, 18432 }, |
| { 133385, 19456 }, |
| { 127046, 20480 }, |
| { 121042, 21504 }, |
| { 115352, 22528 }, |
| { 109960, 23552 }, |
| { 104848, 24576 }, |
| { 100000, 25600 }, |
| { 95402, 26624 }, |
| { 91038, 27648 }, |
| { 86897, 28672 }, |
| { 82965, 29696 }, |
| { 79232, 30720 }, |
| { 75686, 31744 }, |
| { 72316, 32768 }, |
| { 69114, 33792 }, |
| { 66070, 34816 }, |
| { 63176, 35840 }, |
| { 60423, 36864 }, |
| { 57804, 37888 }, |
| { 55312, 38912 }, |
| { 52940, 39936 }, |
| { 50681, 40960 }, |
| { 48531, 41984 }, |
| { 46482, 43008 }, |
| { 44530, 44032 }, |
| { 42670, 45056 }, |
| { 40897, 46080 }, |
| { 39207, 47104 }, |
| { 37595, 48128 }, |
| { 36057, 49152 }, |
| { 34590, 50176 }, |
| { 33190, 51200 }, |
| { 31853, 52224 }, |
| { 30577, 53248 }, |
| { 29358, 54272 }, |
| { 28194, 55296 }, |
| { 27082, 56320 }, |
| { 26020, 57344 }, |
| { 25004, 58368 }, |
| { 24033, 59392 }, |
| { 23104, 60416 }, |
| { 22216, 61440 }, |
| { 21367, 62464 }, |
| { 20554, 63488 }, |
| { 19776, 64512 }, |
| { 19031, 65536 }, |
| { 18318, 66560 }, |
| { 17636, 67584 }, |
| { 16982, 68608 }, |
| { 16355, 69632 }, |
| { 15755, 70656 }, |
| { 15180, 71680 }, |
| { 14628, 72704 }, |
| { 14099, 73728 }, |
| { 13592, 74752 }, |
| { 13106, 75776 }, |
| { 12640, 76800 }, |
| { 12192, 77824 }, |
| { 11762, 78848 }, |
| { 11350, 79872 }, |
| { 10954, 80896 }, |
| { 10574, 81920 }, |
| { 10209, 82944 }, |
| { 9858, 83968 }, |
| { 9521, 84992 }, |
| { 9197, 86016 }, |
| { 8886, 87040 }, |
| { 8587, 88064 }, |
| { 8299, 89088 }, |
| { 8023, 90112 }, |
| { 7757, 91136 }, |
| { 7501, 92160 }, |
| { 7254, 93184 }, |
| { 7017, 94208 }, |
| { 6789, 95232 }, |
| { 6570, 96256 }, |
| { 6358, 97280 }, |
| { 6155, 98304 }, |
| { 5959, 99328 }, |
| { 5770, 100352 }, |
| { 5588, 101376 }, |
| { 5412, 102400 }, |
| { 5243, 103424 }, |
| { 5080, 104448 }, |
| { 4923, 105472 }, |
| { 4771, 106496 }, |
| { 4625, 107520 }, |
| { 4484, 108544 }, |
| { 4348, 109568 }, |
| { 4217, 110592 }, |
| { 4090, 111616 }, |
| { 3968, 112640 }, |
| { 3850, 113664 }, |
| { 3736, 114688 }, |
| { 3626, 115712 }, |
| { 3519, 116736 }, |
| { 3417, 117760 }, |
| { 3317, 118784 }, |
| { 3221, 119808 }, |
| { 3129, 120832 }, |
| { 3039, 121856 }, |
| { 2952, 122880 }, |
| { 2868, 123904 }, |
| { 2787, 124928 }, |
| { 2709, 125952 }, |
| { 2633, 126976 }, |
| { 2560, 128000 }, |
| { 2489, 129024 }, |
| { 2420, 130048 } |
| }; |
| |
| static int qcom_vadc_scale_hw_calib_volt( |
| const struct vadc_prescale_ratio *prescale, |
| const struct adc5_data *data, |
| u16 adc_code, int *result_uv); |
| static int qcom_vadc_scale_hw_calib_therm( |
| const struct vadc_prescale_ratio *prescale, |
| const struct adc5_data *data, |
| u16 adc_code, int *result_mdec); |
| static int qcom_vadc7_scale_hw_calib_therm( |
| const struct vadc_prescale_ratio *prescale, |
| const struct adc5_data *data, |
| u16 adc_code, int *result_mdec); |
| static int qcom_vadc_scale_hw_smb_temp( |
| const struct vadc_prescale_ratio *prescale, |
| const struct adc5_data *data, |
| u16 adc_code, int *result_mdec); |
| static int qcom_vadc_scale_hw_chg5_temp( |
| const struct vadc_prescale_ratio *prescale, |
| const struct adc5_data *data, |
| u16 adc_code, int *result_mdec); |
| static int qcom_vadc_scale_hw_calib_die_temp( |
| const struct vadc_prescale_ratio *prescale, |
| const struct adc5_data *data, |
| u16 adc_code, int *result_mdec); |
| static int qcom_vadc7_scale_hw_calib_die_temp( |
| const struct vadc_prescale_ratio *prescale, |
| const struct adc5_data *data, |
| u16 adc_code, int *result_mdec); |
| |
| static struct qcom_adc5_scale_type scale_adc5_fn[] = { |
| [SCALE_HW_CALIB_DEFAULT] = {qcom_vadc_scale_hw_calib_volt}, |
| [SCALE_HW_CALIB_THERM_100K_PULLUP] = {qcom_vadc_scale_hw_calib_therm}, |
| [SCALE_HW_CALIB_XOTHERM] = {qcom_vadc_scale_hw_calib_therm}, |
| [SCALE_HW_CALIB_THERM_100K_PU_PM7] = { |
| qcom_vadc7_scale_hw_calib_therm}, |
| [SCALE_HW_CALIB_PMIC_THERM] = {qcom_vadc_scale_hw_calib_die_temp}, |
| [SCALE_HW_CALIB_PMIC_THERM_PM7] = { |
| qcom_vadc7_scale_hw_calib_die_temp}, |
| [SCALE_HW_CALIB_PM5_CHG_TEMP] = {qcom_vadc_scale_hw_chg5_temp}, |
| [SCALE_HW_CALIB_PM5_SMB_TEMP] = {qcom_vadc_scale_hw_smb_temp}, |
| }; |
| |
| static int qcom_vadc_map_voltage_temp(const struct vadc_map_pt *pts, |
| u32 tablesize, s32 input, int *output) |
| { |
| bool descending = 1; |
| u32 i = 0; |
| |
| if (!pts) |
| return -EINVAL; |
| |
| /* Check if table is descending or ascending */ |
| if (tablesize > 1) { |
| if (pts[0].x < pts[1].x) |
| descending = 0; |
| } |
| |
| while (i < tablesize) { |
| if ((descending) && (pts[i].x < input)) { |
| /* table entry is less than measured*/ |
| /* value and table is descending, stop */ |
| break; |
| } else if ((!descending) && |
| (pts[i].x > input)) { |
| /* table entry is greater than measured*/ |
| /*value and table is ascending, stop */ |
| break; |
| } |
| i++; |
| } |
| |
| if (i == 0) { |
| *output = pts[0].y; |
| } else if (i == tablesize) { |
| *output = pts[tablesize - 1].y; |
| } else { |
| /* result is between search_index and search_index-1 */ |
| /* interpolate linearly */ |
| *output = (((s32)((pts[i].y - pts[i - 1].y) * |
| (input - pts[i - 1].x)) / |
| (pts[i].x - pts[i - 1].x)) + |
| pts[i - 1].y); |
| } |
| |
| return 0; |
| } |
| |
| static void qcom_vadc_scale_calib(const struct vadc_linear_graph *calib_graph, |
| u16 adc_code, |
| bool absolute, |
| s64 *scale_voltage) |
| { |
| *scale_voltage = (adc_code - calib_graph->gnd); |
| *scale_voltage *= calib_graph->dx; |
| *scale_voltage = div64_s64(*scale_voltage, calib_graph->dy); |
| if (absolute) |
| *scale_voltage += calib_graph->dx; |
| |
| if (*scale_voltage < 0) |
| *scale_voltage = 0; |
| } |
| |
| static int qcom_vadc_scale_volt(const struct vadc_linear_graph *calib_graph, |
| const struct vadc_prescale_ratio *prescale, |
| bool absolute, u16 adc_code, |
| int *result_uv) |
| { |
| s64 voltage = 0, result = 0; |
| |
| qcom_vadc_scale_calib(calib_graph, adc_code, absolute, &voltage); |
| |
| voltage = voltage * prescale->den; |
| result = div64_s64(voltage, prescale->num); |
| *result_uv = result; |
| |
| return 0; |
| } |
| |
| static int qcom_vadc_scale_therm(const struct vadc_linear_graph *calib_graph, |
| const struct vadc_prescale_ratio *prescale, |
| bool absolute, u16 adc_code, |
| int *result_mdec) |
| { |
| s64 voltage = 0; |
| int ret; |
| |
| qcom_vadc_scale_calib(calib_graph, adc_code, absolute, &voltage); |
| |
| if (absolute) |
| voltage = div64_s64(voltage, 1000); |
| |
| ret = qcom_vadc_map_voltage_temp(adcmap_100k_104ef_104fb, |
| ARRAY_SIZE(adcmap_100k_104ef_104fb), |
| voltage, result_mdec); |
| if (ret) |
| return ret; |
| |
| *result_mdec *= 1000; |
| |
| return 0; |
| } |
| |
| static int qcom_vadc_scale_die_temp(const struct vadc_linear_graph *calib_graph, |
| const struct vadc_prescale_ratio *prescale, |
| bool absolute, |
| u16 adc_code, int *result_mdec) |
| { |
| s64 voltage = 0; |
| u64 temp; /* Temporary variable for do_div */ |
| |
| qcom_vadc_scale_calib(calib_graph, adc_code, absolute, &voltage); |
| |
| if (voltage > 0) { |
| temp = voltage * prescale->den; |
| do_div(temp, prescale->num * 2); |
| voltage = temp; |
| } else { |
| voltage = 0; |
| } |
| |
| *result_mdec = milli_kelvin_to_millicelsius(voltage); |
| |
| return 0; |
| } |
| |
| static int qcom_vadc_scale_chg_temp(const struct vadc_linear_graph *calib_graph, |
| const struct vadc_prescale_ratio *prescale, |
| bool absolute, |
| u16 adc_code, int *result_mdec) |
| { |
| s64 voltage = 0, result = 0; |
| |
| qcom_vadc_scale_calib(calib_graph, adc_code, absolute, &voltage); |
| |
| voltage = voltage * prescale->den; |
| voltage = div64_s64(voltage, prescale->num); |
| voltage = ((PMI_CHG_SCALE_1) * (voltage * 2)); |
| voltage = (voltage + PMI_CHG_SCALE_2); |
| result = div64_s64(voltage, 1000000); |
| *result_mdec = result; |
| |
| return 0; |
| } |
| |
| static int qcom_vadc_scale_code_voltage_factor(u16 adc_code, |
| const struct vadc_prescale_ratio *prescale, |
| const struct adc5_data *data, |
| unsigned int factor) |
| { |
| s64 voltage, temp, adc_vdd_ref_mv = 1875; |
| |
| /* |
| * The normal data range is between 0V to 1.875V. On cases where |
| * we read low voltage values, the ADC code can go beyond the |
| * range and the scale result is incorrect so we clamp the values |
| * for the cases where the code represents a value below 0V |
| */ |
| if (adc_code > VADC5_MAX_CODE) |
| adc_code = 0; |
| |
| /* (ADC code * vref_vadc (1.875V)) / full_scale_code */ |
| voltage = (s64) adc_code * adc_vdd_ref_mv * 1000; |
| voltage = div64_s64(voltage, data->full_scale_code_volt); |
| if (voltage > 0) { |
| voltage *= prescale->den; |
| temp = prescale->num * factor; |
| voltage = div64_s64(voltage, temp); |
| } else { |
| voltage = 0; |
| } |
| |
| return (int) voltage; |
| } |
| |
| static int qcom_vadc7_scale_hw_calib_therm( |
| const struct vadc_prescale_ratio *prescale, |
| const struct adc5_data *data, |
| u16 adc_code, int *result_mdec) |
| { |
| s64 resistance = adc_code; |
| int ret, result; |
| |
| if (adc_code >= RATIO_MAX_ADC7) |
| return -EINVAL; |
| |
| /* (ADC code * R_PULLUP (100Kohm)) / (full_scale_code - ADC code)*/ |
| resistance *= R_PU_100K; |
| resistance = div64_s64(resistance, RATIO_MAX_ADC7 - adc_code); |
| |
| ret = qcom_vadc_map_voltage_temp(adcmap7_100k, |
| ARRAY_SIZE(adcmap7_100k), |
| resistance, &result); |
| if (ret) |
| return ret; |
| |
| *result_mdec = result; |
| |
| return 0; |
| } |
| |
| static int qcom_vadc_scale_hw_calib_volt( |
| const struct vadc_prescale_ratio *prescale, |
| const struct adc5_data *data, |
| u16 adc_code, int *result_uv) |
| { |
| *result_uv = qcom_vadc_scale_code_voltage_factor(adc_code, |
| prescale, data, 1); |
| |
| return 0; |
| } |
| |
| static int qcom_vadc_scale_hw_calib_therm( |
| const struct vadc_prescale_ratio *prescale, |
| const struct adc5_data *data, |
| u16 adc_code, int *result_mdec) |
| { |
| int voltage; |
| |
| voltage = qcom_vadc_scale_code_voltage_factor(adc_code, |
| prescale, data, 1000); |
| |
| /* Map voltage to temperature from look-up table */ |
| return qcom_vadc_map_voltage_temp(adcmap_100k_104ef_104fb_1875_vref, |
| ARRAY_SIZE(adcmap_100k_104ef_104fb_1875_vref), |
| voltage, result_mdec); |
| } |
| |
| static int qcom_vadc_scale_hw_calib_die_temp( |
| const struct vadc_prescale_ratio *prescale, |
| const struct adc5_data *data, |
| u16 adc_code, int *result_mdec) |
| { |
| *result_mdec = qcom_vadc_scale_code_voltage_factor(adc_code, |
| prescale, data, 2); |
| *result_mdec = milli_kelvin_to_millicelsius(*result_mdec); |
| |
| return 0; |
| } |
| |
| static int qcom_vadc7_scale_hw_calib_die_temp( |
| const struct vadc_prescale_ratio *prescale, |
| const struct adc5_data *data, |
| u16 adc_code, int *result_mdec) |
| { |
| |
| int voltage, vtemp0, temp, i; |
| |
| voltage = qcom_vadc_scale_code_voltage_factor(adc_code, |
| prescale, data, 1); |
| |
| if (adcmap7_die_temp[0].x > voltage) { |
| *result_mdec = DIE_TEMP_ADC7_SCALE_1; |
| return 0; |
| } |
| |
| if (adcmap7_die_temp[ARRAY_SIZE(adcmap7_die_temp) - 1].x <= voltage) { |
| *result_mdec = DIE_TEMP_ADC7_MAX; |
| return 0; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(adcmap7_die_temp); i++) |
| if (adcmap7_die_temp[i].x > voltage) |
| break; |
| |
| vtemp0 = adcmap7_die_temp[i - 1].x; |
| voltage = voltage - vtemp0; |
| temp = div64_s64(voltage * DIE_TEMP_ADC7_SCALE_FACTOR, |
| adcmap7_die_temp[i - 1].y); |
| temp += DIE_TEMP_ADC7_SCALE_1 + (DIE_TEMP_ADC7_SCALE_2 * (i - 1)); |
| *result_mdec = temp; |
| |
| return 0; |
| } |
| |
| static int qcom_vadc_scale_hw_smb_temp( |
| const struct vadc_prescale_ratio *prescale, |
| const struct adc5_data *data, |
| u16 adc_code, int *result_mdec) |
| { |
| *result_mdec = qcom_vadc_scale_code_voltage_factor(adc_code * 100, |
| prescale, data, PMIC5_SMB_TEMP_SCALE_FACTOR); |
| *result_mdec = PMIC5_SMB_TEMP_CONSTANT - *result_mdec; |
| |
| return 0; |
| } |
| |
| static int qcom_vadc_scale_hw_chg5_temp( |
| const struct vadc_prescale_ratio *prescale, |
| const struct adc5_data *data, |
| u16 adc_code, int *result_mdec) |
| { |
| *result_mdec = qcom_vadc_scale_code_voltage_factor(adc_code, |
| prescale, data, 4); |
| *result_mdec = PMIC5_CHG_TEMP_SCALE_FACTOR - *result_mdec; |
| |
| return 0; |
| } |
| |
| int qcom_vadc_scale(enum vadc_scale_fn_type scaletype, |
| const struct vadc_linear_graph *calib_graph, |
| const struct vadc_prescale_ratio *prescale, |
| bool absolute, |
| u16 adc_code, int *result) |
| { |
| switch (scaletype) { |
| case SCALE_DEFAULT: |
| return qcom_vadc_scale_volt(calib_graph, prescale, |
| absolute, adc_code, |
| result); |
| case SCALE_THERM_100K_PULLUP: |
| case SCALE_XOTHERM: |
| return qcom_vadc_scale_therm(calib_graph, prescale, |
| absolute, adc_code, |
| result); |
| case SCALE_PMIC_THERM: |
| return qcom_vadc_scale_die_temp(calib_graph, prescale, |
| absolute, adc_code, |
| result); |
| case SCALE_PMI_CHG_TEMP: |
| return qcom_vadc_scale_chg_temp(calib_graph, prescale, |
| absolute, adc_code, |
| result); |
| default: |
| return -EINVAL; |
| } |
| } |
| EXPORT_SYMBOL(qcom_vadc_scale); |
| |
| int qcom_adc5_hw_scale(enum vadc_scale_fn_type scaletype, |
| const struct vadc_prescale_ratio *prescale, |
| const struct adc5_data *data, |
| u16 adc_code, int *result) |
| { |
| if (!(scaletype >= SCALE_HW_CALIB_DEFAULT && |
| scaletype < SCALE_HW_CALIB_INVALID)) { |
| pr_err("Invalid scale type %d\n", scaletype); |
| return -EINVAL; |
| } |
| |
| return scale_adc5_fn[scaletype].scale_fn(prescale, data, |
| adc_code, result); |
| } |
| EXPORT_SYMBOL(qcom_adc5_hw_scale); |
| |
| int qcom_vadc_decimation_from_dt(u32 value) |
| { |
| if (!is_power_of_2(value) || value < VADC_DECIMATION_MIN || |
| value > VADC_DECIMATION_MAX) |
| return -EINVAL; |
| |
| return __ffs64(value / VADC_DECIMATION_MIN); |
| } |
| EXPORT_SYMBOL(qcom_vadc_decimation_from_dt); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("Qualcomm ADC common functionality"); |