blob: 55bd2dc514e9367a57c441ecc7e8f4bafffc5340 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* IIO driver for the Apex Embedded Systems STX104
* Copyright (C) 2016 William Breathitt Gray
*/
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/gpio/driver.h>
#include <linux/iio/iio.h>
#include <linux/iio/types.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/isa.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#define STX104_OUT_CHAN(chan) { \
.type = IIO_VOLTAGE, \
.channel = chan, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.indexed = 1, \
.output = 1 \
}
#define STX104_IN_CHAN(chan, diff) { \
.type = IIO_VOLTAGE, \
.channel = chan, \
.channel2 = chan, \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \
BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE), \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.indexed = 1, \
.differential = diff \
}
#define STX104_NUM_OUT_CHAN 2
#define STX104_EXTENT 16
static unsigned int base[max_num_isa_dev(STX104_EXTENT)];
static unsigned int num_stx104;
module_param_hw_array(base, uint, ioport, &num_stx104, 0);
MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses");
/**
* struct stx104_iio - IIO device private data structure
* @chan_out_states: channels' output states
* @base: base port address of the IIO device
*/
struct stx104_iio {
unsigned int chan_out_states[STX104_NUM_OUT_CHAN];
unsigned int base;
};
/**
* struct stx104_gpio - GPIO device private data structure
* @chip: instance of the gpio_chip
* @lock: synchronization lock to prevent I/O race conditions
* @base: base port address of the GPIO device
* @out_state: output bits state
*/
struct stx104_gpio {
struct gpio_chip chip;
spinlock_t lock;
unsigned int base;
unsigned int out_state;
};
static int stx104_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val, int *val2, long mask)
{
struct stx104_iio *const priv = iio_priv(indio_dev);
unsigned int adc_config;
int adbu;
int gain;
switch (mask) {
case IIO_CHAN_INFO_HARDWAREGAIN:
/* get gain configuration */
adc_config = inb(priv->base + 11);
gain = adc_config & 0x3;
*val = 1 << gain;
return IIO_VAL_INT;
case IIO_CHAN_INFO_RAW:
if (chan->output) {
*val = priv->chan_out_states[chan->channel];
return IIO_VAL_INT;
}
/* select ADC channel */
outb(chan->channel | (chan->channel << 4), priv->base + 2);
/* trigger ADC sample capture and wait for completion */
outb(0, priv->base);
while (inb(priv->base + 8) & BIT(7));
*val = inw(priv->base);
return IIO_VAL_INT;
case IIO_CHAN_INFO_OFFSET:
/* get ADC bipolar/unipolar configuration */
adc_config = inb(priv->base + 11);
adbu = !(adc_config & BIT(2));
*val = -32768 * adbu;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
/* get ADC bipolar/unipolar and gain configuration */
adc_config = inb(priv->base + 11);
adbu = !(adc_config & BIT(2));
gain = adc_config & 0x3;
*val = 5;
*val2 = 15 - adbu + gain;
return IIO_VAL_FRACTIONAL_LOG2;
}
return -EINVAL;
}
static int stx104_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2, long mask)
{
struct stx104_iio *const priv = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_HARDWAREGAIN:
/* Only four gain states (x1, x2, x4, x8) */
switch (val) {
case 1:
outb(0, priv->base + 11);
break;
case 2:
outb(1, priv->base + 11);
break;
case 4:
outb(2, priv->base + 11);
break;
case 8:
outb(3, priv->base + 11);
break;
default:
return -EINVAL;
}
return 0;
case IIO_CHAN_INFO_RAW:
if (chan->output) {
/* DAC can only accept up to a 16-bit value */
if ((unsigned int)val > 65535)
return -EINVAL;
priv->chan_out_states[chan->channel] = val;
outw(val, priv->base + 4 + 2 * chan->channel);
return 0;
}
return -EINVAL;
}
return -EINVAL;
}
static const struct iio_info stx104_info = {
.read_raw = stx104_read_raw,
.write_raw = stx104_write_raw
};
/* single-ended input channels configuration */
static const struct iio_chan_spec stx104_channels_sing[] = {
STX104_OUT_CHAN(0), STX104_OUT_CHAN(1),
STX104_IN_CHAN(0, 0), STX104_IN_CHAN(1, 0), STX104_IN_CHAN(2, 0),
STX104_IN_CHAN(3, 0), STX104_IN_CHAN(4, 0), STX104_IN_CHAN(5, 0),
STX104_IN_CHAN(6, 0), STX104_IN_CHAN(7, 0), STX104_IN_CHAN(8, 0),
STX104_IN_CHAN(9, 0), STX104_IN_CHAN(10, 0), STX104_IN_CHAN(11, 0),
STX104_IN_CHAN(12, 0), STX104_IN_CHAN(13, 0), STX104_IN_CHAN(14, 0),
STX104_IN_CHAN(15, 0)
};
/* differential input channels configuration */
static const struct iio_chan_spec stx104_channels_diff[] = {
STX104_OUT_CHAN(0), STX104_OUT_CHAN(1),
STX104_IN_CHAN(0, 1), STX104_IN_CHAN(1, 1), STX104_IN_CHAN(2, 1),
STX104_IN_CHAN(3, 1), STX104_IN_CHAN(4, 1), STX104_IN_CHAN(5, 1),
STX104_IN_CHAN(6, 1), STX104_IN_CHAN(7, 1)
};
static int stx104_gpio_get_direction(struct gpio_chip *chip,
unsigned int offset)
{
/* GPIO 0-3 are input only, while the rest are output only */
if (offset < 4)
return 1;
return 0;
}
static int stx104_gpio_direction_input(struct gpio_chip *chip,
unsigned int offset)
{
if (offset >= 4)
return -EINVAL;
return 0;
}
static int stx104_gpio_direction_output(struct gpio_chip *chip,
unsigned int offset, int value)
{
if (offset < 4)
return -EINVAL;
chip->set(chip, offset, value);
return 0;
}
static int stx104_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
if (offset >= 4)
return -EINVAL;
return !!(inb(stx104gpio->base) & BIT(offset));
}
static int stx104_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
unsigned long *bits)
{
struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
*bits = inb(stx104gpio->base);
return 0;
}
static void stx104_gpio_set(struct gpio_chip *chip, unsigned int offset,
int value)
{
struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
const unsigned int mask = BIT(offset) >> 4;
unsigned long flags;
if (offset < 4)
return;
spin_lock_irqsave(&stx104gpio->lock, flags);
if (value)
stx104gpio->out_state |= mask;
else
stx104gpio->out_state &= ~mask;
outb(stx104gpio->out_state, stx104gpio->base);
spin_unlock_irqrestore(&stx104gpio->lock, flags);
}
#define STX104_NGPIO 8
static const char *stx104_names[STX104_NGPIO] = {
"DIN0", "DIN1", "DIN2", "DIN3", "DOUT0", "DOUT1", "DOUT2", "DOUT3"
};
static void stx104_gpio_set_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
unsigned long flags;
/* verify masked GPIO are output */
if (!(*mask & 0xF0))
return;
*mask >>= 4;
*bits >>= 4;
spin_lock_irqsave(&stx104gpio->lock, flags);
stx104gpio->out_state &= ~*mask;
stx104gpio->out_state |= *mask & *bits;
outb(stx104gpio->out_state, stx104gpio->base);
spin_unlock_irqrestore(&stx104gpio->lock, flags);
}
static int stx104_probe(struct device *dev, unsigned int id)
{
struct iio_dev *indio_dev;
struct stx104_iio *priv;
struct stx104_gpio *stx104gpio;
int err;
indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
if (!indio_dev)
return -ENOMEM;
stx104gpio = devm_kzalloc(dev, sizeof(*stx104gpio), GFP_KERNEL);
if (!stx104gpio)
return -ENOMEM;
if (!devm_request_region(dev, base[id], STX104_EXTENT,
dev_name(dev))) {
dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
base[id], base[id] + STX104_EXTENT);
return -EBUSY;
}
indio_dev->info = &stx104_info;
indio_dev->modes = INDIO_DIRECT_MODE;
/* determine if differential inputs */
if (inb(base[id] + 8) & BIT(5)) {
indio_dev->num_channels = ARRAY_SIZE(stx104_channels_diff);
indio_dev->channels = stx104_channels_diff;
} else {
indio_dev->num_channels = ARRAY_SIZE(stx104_channels_sing);
indio_dev->channels = stx104_channels_sing;
}
indio_dev->name = dev_name(dev);
priv = iio_priv(indio_dev);
priv->base = base[id];
/* configure device for software trigger operation */
outb(0, base[id] + 9);
/* initialize gain setting to x1 */
outb(0, base[id] + 11);
/* initialize DAC output to 0V */
outw(0, base[id] + 4);
outw(0, base[id] + 6);
stx104gpio->chip.label = dev_name(dev);
stx104gpio->chip.parent = dev;
stx104gpio->chip.owner = THIS_MODULE;
stx104gpio->chip.base = -1;
stx104gpio->chip.ngpio = STX104_NGPIO;
stx104gpio->chip.names = stx104_names;
stx104gpio->chip.get_direction = stx104_gpio_get_direction;
stx104gpio->chip.direction_input = stx104_gpio_direction_input;
stx104gpio->chip.direction_output = stx104_gpio_direction_output;
stx104gpio->chip.get = stx104_gpio_get;
stx104gpio->chip.get_multiple = stx104_gpio_get_multiple;
stx104gpio->chip.set = stx104_gpio_set;
stx104gpio->chip.set_multiple = stx104_gpio_set_multiple;
stx104gpio->base = base[id] + 3;
stx104gpio->out_state = 0x0;
spin_lock_init(&stx104gpio->lock);
err = devm_gpiochip_add_data(dev, &stx104gpio->chip, stx104gpio);
if (err) {
dev_err(dev, "GPIO registering failed (%d)\n", err);
return err;
}
return devm_iio_device_register(dev, indio_dev);
}
static struct isa_driver stx104_driver = {
.probe = stx104_probe,
.driver = {
.name = "stx104"
},
};
module_isa_driver(stx104_driver, num_stx104);
MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
MODULE_DESCRIPTION("Apex Embedded Systems STX104 IIO driver");
MODULE_LICENSE("GPL v2");