| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Xilinx XADC driver |
| * |
| * Copyright 2013 Analog Devices Inc. |
| * Author: Lars-Peter Clausen <lars@metafoo.de> |
| */ |
| |
| #include <linux/iio/events.h> |
| #include <linux/iio/iio.h> |
| #include <linux/kernel.h> |
| |
| #include "xilinx-xadc.h" |
| |
| static const struct iio_chan_spec *xadc_event_to_channel( |
| struct iio_dev *indio_dev, unsigned int event) |
| { |
| switch (event) { |
| case XADC_THRESHOLD_OT_MAX: |
| case XADC_THRESHOLD_TEMP_MAX: |
| return &indio_dev->channels[0]; |
| case XADC_THRESHOLD_VCCINT_MAX: |
| case XADC_THRESHOLD_VCCAUX_MAX: |
| return &indio_dev->channels[event]; |
| default: |
| return &indio_dev->channels[event-1]; |
| } |
| } |
| |
| static void xadc_handle_event(struct iio_dev *indio_dev, unsigned int event) |
| { |
| const struct iio_chan_spec *chan; |
| |
| /* Temperature threshold error, we don't handle this yet */ |
| if (event == 0) |
| return; |
| |
| chan = xadc_event_to_channel(indio_dev, event); |
| |
| if (chan->type == IIO_TEMP) { |
| /* |
| * The temperature channel only supports over-temperature |
| * events. |
| */ |
| iio_push_event(indio_dev, |
| IIO_UNMOD_EVENT_CODE(chan->type, chan->channel, |
| IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING), |
| iio_get_time_ns(indio_dev)); |
| } else { |
| /* |
| * For other channels we don't know whether it is a upper or |
| * lower threshold event. Userspace will have to check the |
| * channel value if it wants to know. |
| */ |
| iio_push_event(indio_dev, |
| IIO_UNMOD_EVENT_CODE(chan->type, chan->channel, |
| IIO_EV_TYPE_THRESH, IIO_EV_DIR_EITHER), |
| iio_get_time_ns(indio_dev)); |
| } |
| } |
| |
| void xadc_handle_events(struct iio_dev *indio_dev, unsigned long events) |
| { |
| unsigned int i; |
| |
| for_each_set_bit(i, &events, 8) |
| xadc_handle_event(indio_dev, i); |
| } |
| |
| static unsigned int xadc_get_threshold_offset(const struct iio_chan_spec *chan, |
| enum iio_event_direction dir) |
| { |
| unsigned int offset; |
| |
| if (chan->type == IIO_TEMP) { |
| offset = XADC_THRESHOLD_OT_MAX; |
| } else { |
| if (chan->channel < 2) |
| offset = chan->channel + 1; |
| else |
| offset = chan->channel + 6; |
| } |
| |
| if (dir == IIO_EV_DIR_FALLING) |
| offset += 4; |
| |
| return offset; |
| } |
| |
| static unsigned int xadc_get_alarm_mask(const struct iio_chan_spec *chan) |
| { |
| if (chan->type == IIO_TEMP) |
| return XADC_ALARM_OT_MASK; |
| switch (chan->channel) { |
| case 0: |
| return XADC_ALARM_VCCINT_MASK; |
| case 1: |
| return XADC_ALARM_VCCAUX_MASK; |
| case 2: |
| return XADC_ALARM_VCCBRAM_MASK; |
| case 3: |
| return XADC_ALARM_VCCPINT_MASK; |
| case 4: |
| return XADC_ALARM_VCCPAUX_MASK; |
| case 5: |
| return XADC_ALARM_VCCODDR_MASK; |
| default: |
| /* We will never get here */ |
| return 0; |
| } |
| } |
| |
| int xadc_read_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, enum iio_event_type type, |
| enum iio_event_direction dir) |
| { |
| struct xadc *xadc = iio_priv(indio_dev); |
| |
| return (bool)(xadc->alarm_mask & xadc_get_alarm_mask(chan)); |
| } |
| |
| int xadc_write_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, enum iio_event_type type, |
| enum iio_event_direction dir, int state) |
| { |
| unsigned int alarm = xadc_get_alarm_mask(chan); |
| struct xadc *xadc = iio_priv(indio_dev); |
| uint16_t cfg, old_cfg; |
| int ret; |
| |
| mutex_lock(&xadc->mutex); |
| |
| if (state) |
| xadc->alarm_mask |= alarm; |
| else |
| xadc->alarm_mask &= ~alarm; |
| |
| xadc->ops->update_alarm(xadc, xadc->alarm_mask); |
| |
| ret = _xadc_read_adc_reg(xadc, XADC_REG_CONF1, &cfg); |
| if (ret) |
| goto err_out; |
| |
| old_cfg = cfg; |
| cfg |= XADC_CONF1_ALARM_MASK; |
| cfg &= ~((xadc->alarm_mask & 0xf0) << 4); /* bram, pint, paux, ddr */ |
| cfg &= ~((xadc->alarm_mask & 0x08) >> 3); /* ot */ |
| cfg &= ~((xadc->alarm_mask & 0x07) << 1); /* temp, vccint, vccaux */ |
| if (old_cfg != cfg) |
| ret = _xadc_write_adc_reg(xadc, XADC_REG_CONF1, cfg); |
| |
| err_out: |
| mutex_unlock(&xadc->mutex); |
| |
| return ret; |
| } |
| |
| /* Register value is msb aligned, the lower 4 bits are ignored */ |
| #define XADC_THRESHOLD_VALUE_SHIFT 4 |
| |
| int xadc_read_event_value(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, enum iio_event_type type, |
| enum iio_event_direction dir, enum iio_event_info info, |
| int *val, int *val2) |
| { |
| unsigned int offset = xadc_get_threshold_offset(chan, dir); |
| struct xadc *xadc = iio_priv(indio_dev); |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| *val = xadc->threshold[offset]; |
| break; |
| case IIO_EV_INFO_HYSTERESIS: |
| *val = xadc->temp_hysteresis; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| *val >>= XADC_THRESHOLD_VALUE_SHIFT; |
| |
| return IIO_VAL_INT; |
| } |
| |
| int xadc_write_event_value(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, enum iio_event_type type, |
| enum iio_event_direction dir, enum iio_event_info info, |
| int val, int val2) |
| { |
| unsigned int offset = xadc_get_threshold_offset(chan, dir); |
| struct xadc *xadc = iio_priv(indio_dev); |
| int ret = 0; |
| |
| val <<= XADC_THRESHOLD_VALUE_SHIFT; |
| |
| if (val < 0 || val > 0xffff) |
| return -EINVAL; |
| |
| mutex_lock(&xadc->mutex); |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| xadc->threshold[offset] = val; |
| break; |
| case IIO_EV_INFO_HYSTERESIS: |
| xadc->temp_hysteresis = val; |
| break; |
| default: |
| mutex_unlock(&xadc->mutex); |
| return -EINVAL; |
| } |
| |
| if (chan->type == IIO_TEMP) { |
| /* |
| * According to the datasheet we need to set the lower 4 bits to |
| * 0x3, otherwise 125 degree celsius will be used as the |
| * threshold. |
| */ |
| val |= 0x3; |
| |
| /* |
| * Since we store the hysteresis as relative (to the threshold) |
| * value, but the hardware expects an absolute value we need to |
| * recalcualte this value whenever the hysteresis or the |
| * threshold changes. |
| */ |
| if (xadc->threshold[offset] < xadc->temp_hysteresis) |
| xadc->threshold[offset + 4] = 0; |
| else |
| xadc->threshold[offset + 4] = xadc->threshold[offset] - |
| xadc->temp_hysteresis; |
| ret = _xadc_write_adc_reg(xadc, XADC_REG_THRESHOLD(offset + 4), |
| xadc->threshold[offset + 4]); |
| if (ret) |
| goto out_unlock; |
| } |
| |
| if (info == IIO_EV_INFO_VALUE) |
| ret = _xadc_write_adc_reg(xadc, XADC_REG_THRESHOLD(offset), val); |
| |
| out_unlock: |
| mutex_unlock(&xadc->mutex); |
| |
| return ret; |
| } |