drivers/iio/humidity/hdc2010.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * hdc2010.c - Support for the TI HDC2010 and HDC2080
  * temperature + relative humidity sensors
  *
  * Copyright (C) 2020 Norphonic AS
  * Author: Eugene Zaikonnikov <ez@norphonic.com>
  *
  * Datasheet: https://www.ti.com/product/HDC2010/datasheet
  * Datasheet: https://www.ti.com/product/HDC2080/datasheet
  */

 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/bitops.h>

 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>

 #define HDC2010_REG_TEMP_LOW			0x00
 #define HDC2010_REG_TEMP_HIGH			0x01
 #define HDC2010_REG_HUMIDITY_LOW		0x02
 #define HDC2010_REG_HUMIDITY_HIGH		0x03
 #define HDC2010_REG_INTERRUPT_DRDY		0x04
 #define HDC2010_REG_TEMP_MAX			0x05
 #define HDC2010_REG_HUMIDITY_MAX		0x06
 #define HDC2010_REG_INTERRUPT_EN		0x07
 #define HDC2010_REG_TEMP_OFFSET_ADJ		0x08
 #define HDC2010_REG_HUMIDITY_OFFSET_ADJ		0x09
 #define HDC2010_REG_TEMP_THR_L			0x0a
 #define HDC2010_REG_TEMP_THR_H			0x0b
 #define HDC2010_REG_RH_THR_L			0x0c
 #define HDC2010_REG_RH_THR_H			0x0d
 #define HDC2010_REG_RESET_DRDY_INT_CONF		0x0e
 #define HDC2010_REG_MEASUREMENT_CONF		0x0f

 #define HDC2010_MEAS_CONF			GENMASK(2, 1)
 #define HDC2010_MEAS_TRIG			BIT(0)
 #define HDC2010_HEATER_EN			BIT(3)
 #define HDC2010_AMM				GENMASK(6, 4)

 struct hdc2010_data {
 	struct i2c_client *client;
 	struct mutex lock;
 	u8 measurement_config;
 	u8 interrupt_config;
 	u8 drdy_config;
 };

 enum hdc2010_addr_groups {
 	HDC2010_GROUP_TEMP = 0,
 	HDC2010_GROUP_HUMIDITY,
 };

 struct hdc2010_reg_record {
 	unsigned long primary;
 	unsigned long peak;
 };

 static const struct hdc2010_reg_record hdc2010_reg_translation[] = {
 	[HDC2010_GROUP_TEMP] = {
 		.primary = HDC2010_REG_TEMP_LOW,
 		.peak = HDC2010_REG_TEMP_MAX,
 	},
 	[HDC2010_GROUP_HUMIDITY] = {
 		.primary = HDC2010_REG_HUMIDITY_LOW,
 		.peak = HDC2010_REG_HUMIDITY_MAX,
 	},
 };

 static IIO_CONST_ATTR(out_current_heater_raw_available, "0 1");

 static struct attribute *hdc2010_attributes[] = {
 	&iio_const_attr_out_current_heater_raw_available.dev_attr.attr,
 	NULL
 };

 static const struct attribute_group hdc2010_attribute_group = {
 	.attrs = hdc2010_attributes,
 };

 static const struct iio_chan_spec hdc2010_channels[] = {
 	{
 		.type = IIO_TEMP,
 		.address = HDC2010_GROUP_TEMP,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 			BIT(IIO_CHAN_INFO_PEAK) |
 			BIT(IIO_CHAN_INFO_OFFSET) |
 			BIT(IIO_CHAN_INFO_SCALE),
 	},
 	{
 		.type = IIO_HUMIDITYRELATIVE,
 		.address = HDC2010_GROUP_HUMIDITY,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 			BIT(IIO_CHAN_INFO_PEAK) |
 			BIT(IIO_CHAN_INFO_SCALE),
 	},
 	{
 		.type = IIO_CURRENT,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 		.extend_name = "heater",
 		.output = 1,
 	},
 };

 static int hdc2010_update_drdy_config(struct hdc2010_data *data,
 					     char mask, char val)
 {
 	u8 tmp = (~mask & data->drdy_config) | val;
 	int ret;

 	ret = i2c_smbus_write_byte_data(data->client,
 					HDC2010_REG_RESET_DRDY_INT_CONF, tmp);
 	if (ret)
 		return ret;

 	data->drdy_config = tmp;

 	return 0;
 }

 static int hdc2010_get_prim_measurement_word(struct hdc2010_data *data,
 					     struct iio_chan_spec const *chan)
 {
 	struct i2c_client *client = data->client;
 	s32 ret;

 	ret = i2c_smbus_read_word_data(client,
 			hdc2010_reg_translation[chan->address].primary);

 	if (ret < 0)
 		dev_err(&client->dev, "Could not read sensor measurement word\n");

 	return ret;
 }

 static int hdc2010_get_peak_measurement_byte(struct hdc2010_data *data,
 					     struct iio_chan_spec const *chan)
 {
 	struct i2c_client *client = data->client;
 	s32 ret;

 	ret = i2c_smbus_read_byte_data(client,
 			hdc2010_reg_translation[chan->address].peak);

 	if (ret < 0)
 		dev_err(&client->dev, "Could not read sensor measurement byte\n");

 	return ret;
 }

 static int hdc2010_get_heater_status(struct hdc2010_data *data)
 {
 	return !!(data->drdy_config & HDC2010_HEATER_EN);
 }

 static int hdc2010_read_raw(struct iio_dev *indio_dev,
 			    struct iio_chan_spec const *chan, int *val,
 			    int *val2, long mask)
 {
 	struct hdc2010_data *data = iio_priv(indio_dev);

 	switch (mask) {
 	case IIO_CHAN_INFO_RAW: {
 		int ret;

 		if (chan->type == IIO_CURRENT) {
 			*val = hdc2010_get_heater_status(data);
 			return IIO_VAL_INT;
 		}
 		ret = iio_device_claim_direct_mode(indio_dev);
 		if (ret)
 			return ret;
 		mutex_lock(&data->lock);
 		ret = hdc2010_get_prim_measurement_word(data, chan);
 		mutex_unlock(&data->lock);
 		iio_device_release_direct_mode(indio_dev);
 		if (ret < 0)
 			return ret;
 		*val = ret;
 		return IIO_VAL_INT;
 	}
 	case IIO_CHAN_INFO_PEAK: {
 		int ret;

 		ret = iio_device_claim_direct_mode(indio_dev);
 		if (ret)
 			return ret;
 		mutex_lock(&data->lock);
 		ret = hdc2010_get_peak_measurement_byte(data, chan);
 		mutex_unlock(&data->lock);
 		iio_device_release_direct_mode(indio_dev);
 		if (ret < 0)
 			return ret;
 		/* Scaling up the value so we can use same offset as RAW */
 		*val = ret * 256;
 		return IIO_VAL_INT;
 	}
 	case IIO_CHAN_INFO_SCALE:
 		*val2 = 65536;
 		if (chan->type == IIO_TEMP)
 			*val = 165000;
 		else
 			*val = 100000;
 		return IIO_VAL_FRACTIONAL;
 	case IIO_CHAN_INFO_OFFSET:
 		*val = -15887;
 		*val2 = 515151;
 		return IIO_VAL_INT_PLUS_MICRO;
 	default:
 		return -EINVAL;
 	}
 }

 static int hdc2010_write_raw(struct iio_dev *indio_dev,
 			     struct iio_chan_spec const *chan,
 			     int val, int val2, long mask)
 {
 	struct hdc2010_data *data = iio_priv(indio_dev);
 	int new, ret;

 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
 		if (chan->type != IIO_CURRENT || val2 != 0)
 			return -EINVAL;

 		switch (val) {
 		case 1:
 			new = HDC2010_HEATER_EN;
 			break;
 		case 0:
 			new = 0;
 			break;
 		default:
 			return -EINVAL;
 		}

 		mutex_lock(&data->lock);
 		ret = hdc2010_update_drdy_config(data, HDC2010_HEATER_EN, new);
 		mutex_unlock(&data->lock);
 		return ret;
 	default:
 		return -EINVAL;
 	}
 }

 static const struct iio_info hdc2010_info = {
 	.read_raw = hdc2010_read_raw,
 	.write_raw = hdc2010_write_raw,
 	.attrs = &hdc2010_attribute_group,
 };

 static int hdc2010_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct iio_dev *indio_dev;
 	struct hdc2010_data *data;
 	u8 tmp;
 	int ret;

 	if (!i2c_check_functionality(client->adapter,
 	    I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
 		return -EOPNOTSUPP;

 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;

 	data = iio_priv(indio_dev);
 	i2c_set_clientdata(client, indio_dev);
 	data->client = client;
 	mutex_init(&data->lock);

 	indio_dev->dev.parent = &client->dev;
 	/*
 	 * As DEVICE ID register does not differentiate between
 	 * HDC2010 and HDC2080, we have the name hardcoded
 	 */
 	indio_dev->name = "hdc2010";
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &hdc2010_info;

 	indio_dev->channels = hdc2010_channels;
 	indio_dev->num_channels = ARRAY_SIZE(hdc2010_channels);

 	/* Enable Automatic Measurement Mode at 5Hz */
 	ret = hdc2010_update_drdy_config(data, HDC2010_AMM, HDC2010_AMM);
 	if (ret)
 		return ret;

 	/*
 	 * We enable both temp and humidity measurement.
 	 * However the measurement won't start even in AMM until triggered.
 	 */
 	tmp = (data->measurement_config & ~HDC2010_MEAS_CONF) |
 		HDC2010_MEAS_TRIG;

 	ret = i2c_smbus_write_byte_data(client, HDC2010_REG_MEASUREMENT_CONF, tmp);
 	if (ret) {
 		dev_warn(&client->dev, "Unable to set up measurement\n");
 		if (hdc2010_update_drdy_config(data, HDC2010_AMM, 0))
 			dev_warn(&client->dev, "Unable to restore default AMM\n");
 		return ret;
 	}

 	data->measurement_config = tmp;

 	return iio_device_register(indio_dev);
 }

 static int hdc2010_remove(struct i2c_client *client)
 {
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	struct hdc2010_data *data = iio_priv(indio_dev);

 	iio_device_unregister(indio_dev);

 	/* Disable Automatic Measurement Mode */
 	if (hdc2010_update_drdy_config(data, HDC2010_AMM, 0))
 		dev_warn(&client->dev, "Unable to restore default AMM\n");

 	return 0;
 }

 static const struct i2c_device_id hdc2010_id[] = {
 	{ "hdc2010" },
 	{ "hdc2080" },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, hdc2010_id);

 static const struct of_device_id hdc2010_dt_ids[] = {
 	{ .compatible = "ti,hdc2010" },
 	{ .compatible = "ti,hdc2080" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, hdc2010_dt_ids);

 static struct i2c_driver hdc2010_driver = {
 	.driver = {
 		.name	= "hdc2010",
 		.of_match_table = hdc2010_dt_ids,
 	},
 	.probe = hdc2010_probe,
 	.remove = hdc2010_remove,
 	.id_table = hdc2010_id,
 };
 module_i2c_driver(hdc2010_driver);

 MODULE_AUTHOR("Eugene Zaikonnikov <ez@norphonic.com>");
 MODULE_DESCRIPTION("TI HDC2010 humidity and temperature sensor driver");
 MODULE_LICENSE("GPL");
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* hdc2010.c - Support for the TI HDC2010 and HDC2080
	* temperature + relative humidity sensors
	*
	* Copyright (C) 2020 Norphonic AS
	* Author: Eugene Zaikonnikov <ez@norphonic.com>
	*
	* Datasheet: https://www.ti.com/product/HDC2010/datasheet
	* Datasheet: https://www.ti.com/product/HDC2080/datasheet
	*/

	#include <linux/module.h>
	#include <linux/init.h>
	#include <linux/i2c.h>
	#include <linux/bitops.h>

	#include <linux/iio/iio.h>
	#include <linux/iio/sysfs.h>

	#define HDC2010_REG_TEMP_LOW 0x00
	#define HDC2010_REG_TEMP_HIGH 0x01
	#define HDC2010_REG_HUMIDITY_LOW 0x02
	#define HDC2010_REG_HUMIDITY_HIGH 0x03
	#define HDC2010_REG_INTERRUPT_DRDY 0x04
	#define HDC2010_REG_TEMP_MAX 0x05
	#define HDC2010_REG_HUMIDITY_MAX 0x06
	#define HDC2010_REG_INTERRUPT_EN 0x07
	#define HDC2010_REG_TEMP_OFFSET_ADJ 0x08
	#define HDC2010_REG_HUMIDITY_OFFSET_ADJ 0x09
	#define HDC2010_REG_TEMP_THR_L 0x0a
	#define HDC2010_REG_TEMP_THR_H 0x0b
	#define HDC2010_REG_RH_THR_L 0x0c
	#define HDC2010_REG_RH_THR_H 0x0d
	#define HDC2010_REG_RESET_DRDY_INT_CONF 0x0e
	#define HDC2010_REG_MEASUREMENT_CONF 0x0f

	#define HDC2010_MEAS_CONF GENMASK(2, 1)
	#define HDC2010_MEAS_TRIG BIT(0)
	#define HDC2010_HEATER_EN BIT(3)
	#define HDC2010_AMM GENMASK(6, 4)

	struct hdc2010_data {
	struct i2c_client *client;
	struct mutex lock;
	u8 measurement_config;
	u8 interrupt_config;
	u8 drdy_config;
	};

	enum hdc2010_addr_groups {
	HDC2010_GROUP_TEMP = 0,
	HDC2010_GROUP_HUMIDITY,
	};

	struct hdc2010_reg_record {
	unsigned long primary;
	unsigned long peak;
	};

	static const struct hdc2010_reg_record hdc2010_reg_translation[] = {
	[HDC2010_GROUP_TEMP] = {
	.primary = HDC2010_REG_TEMP_LOW,
	.peak = HDC2010_REG_TEMP_MAX,
	},
	[HDC2010_GROUP_HUMIDITY] = {
	.primary = HDC2010_REG_HUMIDITY_LOW,
	.peak = HDC2010_REG_HUMIDITY_MAX,
	},
	};

	static IIO_CONST_ATTR(out_current_heater_raw_available, "0 1");

	static struct attribute *hdc2010_attributes[] = {
	&iio_const_attr_out_current_heater_raw_available.dev_attr.attr,
	NULL
	};

	static const struct attribute_group hdc2010_attribute_group = {
	.attrs = hdc2010_attributes,
	};

	static const struct iio_chan_spec hdc2010_channels[] = {
	{
	.type = IIO_TEMP,
	.address = HDC2010_GROUP_TEMP,
	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) \|
	BIT(IIO_CHAN_INFO_PEAK) \|
	BIT(IIO_CHAN_INFO_OFFSET) \|
	BIT(IIO_CHAN_INFO_SCALE),
	},
	{
	.type = IIO_HUMIDITYRELATIVE,
	.address = HDC2010_GROUP_HUMIDITY,
	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) \|
	BIT(IIO_CHAN_INFO_PEAK) \|
	BIT(IIO_CHAN_INFO_SCALE),
	},
	{
	.type = IIO_CURRENT,
	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
	.extend_name = "heater",
	.output = 1,
	},
	};

	static int hdc2010_update_drdy_config(struct hdc2010_data *data,
	char mask, char val)
	{
	u8 tmp = (~mask & data->drdy_config) \| val;
	int ret;

	ret = i2c_smbus_write_byte_data(data->client,
	HDC2010_REG_RESET_DRDY_INT_CONF, tmp);
	if (ret)
	return ret;

	data->drdy_config = tmp;

	return 0;
	}

	static int hdc2010_get_prim_measurement_word(struct hdc2010_data *data,
	struct iio_chan_spec const *chan)
	{
	struct i2c_client *client = data->client;
	s32 ret;

	ret = i2c_smbus_read_word_data(client,
	hdc2010_reg_translation[chan->address].primary);

	if (ret < 0)
	dev_err(&client->dev, "Could not read sensor measurement word\n");

	return ret;
	}

	static int hdc2010_get_peak_measurement_byte(struct hdc2010_data *data,
	struct iio_chan_spec const *chan)
	{
	struct i2c_client *client = data->client;
	s32 ret;

	ret = i2c_smbus_read_byte_data(client,
	hdc2010_reg_translation[chan->address].peak);

	if (ret < 0)
	dev_err(&client->dev, "Could not read sensor measurement byte\n");

	return ret;
	}

	static int hdc2010_get_heater_status(struct hdc2010_data *data)
	{
	return !!(data->drdy_config & HDC2010_HEATER_EN);
	}

	static int hdc2010_read_raw(struct iio_dev *indio_dev,
	struct iio_chan_spec const chan, int val,
	int *val2, long mask)
	{
	struct hdc2010_data *data = iio_priv(indio_dev);

	switch (mask) {
	case IIO_CHAN_INFO_RAW: {
	int ret;

	if (chan->type == IIO_CURRENT) {
	*val = hdc2010_get_heater_status(data);
	return IIO_VAL_INT;
	}
	ret = iio_device_claim_direct_mode(indio_dev);
	if (ret)
	return ret;
	mutex_lock(&data->lock);
	ret = hdc2010_get_prim_measurement_word(data, chan);
	mutex_unlock(&data->lock);
	iio_device_release_direct_mode(indio_dev);
	if (ret < 0)
	return ret;
	*val = ret;
	return IIO_VAL_INT;
	}
	case IIO_CHAN_INFO_PEAK: {
	int ret;

	ret = iio_device_claim_direct_mode(indio_dev);
	if (ret)
	return ret;
	mutex_lock(&data->lock);
	ret = hdc2010_get_peak_measurement_byte(data, chan);
	mutex_unlock(&data->lock);
	iio_device_release_direct_mode(indio_dev);
	if (ret < 0)
	return ret;
	/* Scaling up the value so we can use same offset as RAW */
	val = ret 256;
	return IIO_VAL_INT;
	}
	case IIO_CHAN_INFO_SCALE:
	*val2 = 65536;
	if (chan->type == IIO_TEMP)
	*val = 165000;
	else
	*val = 100000;
	return IIO_VAL_FRACTIONAL;
	case IIO_CHAN_INFO_OFFSET:
	*val = -15887;
	*val2 = 515151;
	return IIO_VAL_INT_PLUS_MICRO;
	default:
	return -EINVAL;
	}
	}

	static int hdc2010_write_raw(struct iio_dev *indio_dev,
	struct iio_chan_spec const *chan,
	int val, int val2, long mask)
	{
	struct hdc2010_data *data = iio_priv(indio_dev);
	int new, ret;

	switch (mask) {
	case IIO_CHAN_INFO_RAW:
	if (chan->type != IIO_CURRENT \|\| val2 != 0)
	return -EINVAL;

	switch (val) {
	case 1:
	new = HDC2010_HEATER_EN;
	break;
	case 0:
	new = 0;
	break;
	default:
	return -EINVAL;
	}

	mutex_lock(&data->lock);
	ret = hdc2010_update_drdy_config(data, HDC2010_HEATER_EN, new);
	mutex_unlock(&data->lock);
	return ret;
	default:
	return -EINVAL;
	}
	}

	static const struct iio_info hdc2010_info = {
	.read_raw = hdc2010_read_raw,
	.write_raw = hdc2010_write_raw,
	.attrs = &hdc2010_attribute_group,
	};

	static int hdc2010_probe(struct i2c_client *client,
	const struct i2c_device_id *id)
	{
	struct iio_dev *indio_dev;
	struct hdc2010_data *data;
	u8 tmp;
	int ret;

	if (!i2c_check_functionality(client->adapter,
	I2C_FUNC_SMBUS_WORD_DATA \| I2C_FUNC_SMBUS_BYTE \| I2C_FUNC_I2C))
	return -EOPNOTSUPP;

	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
	if (!indio_dev)
	return -ENOMEM;

	data = iio_priv(indio_dev);
	i2c_set_clientdata(client, indio_dev);
	data->client = client;
	mutex_init(&data->lock);

	indio_dev->dev.parent = &client->dev;
	/*
	* As DEVICE ID register does not differentiate between
	* HDC2010 and HDC2080, we have the name hardcoded
	*/
	indio_dev->name = "hdc2010";
	indio_dev->modes = INDIO_DIRECT_MODE;
	indio_dev->info = &hdc2010_info;

	indio_dev->channels = hdc2010_channels;
	indio_dev->num_channels = ARRAY_SIZE(hdc2010_channels);

	/* Enable Automatic Measurement Mode at 5Hz */
	ret = hdc2010_update_drdy_config(data, HDC2010_AMM, HDC2010_AMM);
	if (ret)
	return ret;

	/*
	* We enable both temp and humidity measurement.
	* However the measurement won't start even in AMM until triggered.
	*/
	tmp = (data->measurement_config & ~HDC2010_MEAS_CONF) \|
	HDC2010_MEAS_TRIG;

	ret = i2c_smbus_write_byte_data(client, HDC2010_REG_MEASUREMENT_CONF, tmp);
	if (ret) {
	dev_warn(&client->dev, "Unable to set up measurement\n");
	if (hdc2010_update_drdy_config(data, HDC2010_AMM, 0))
	dev_warn(&client->dev, "Unable to restore default AMM\n");
	return ret;
	}

	data->measurement_config = tmp;

	return iio_device_register(indio_dev);
	}

	static int hdc2010_remove(struct i2c_client *client)
	{
	struct iio_dev *indio_dev = i2c_get_clientdata(client);
	struct hdc2010_data *data = iio_priv(indio_dev);

	iio_device_unregister(indio_dev);

	/* Disable Automatic Measurement Mode */
	if (hdc2010_update_drdy_config(data, HDC2010_AMM, 0))
	dev_warn(&client->dev, "Unable to restore default AMM\n");

	return 0;
	}

	static const struct i2c_device_id hdc2010_id[] = {
	{ "hdc2010" },
	{ "hdc2080" },
	{ }
	};
	MODULE_DEVICE_TABLE(i2c, hdc2010_id);

	static const struct of_device_id hdc2010_dt_ids[] = {
	{ .compatible = "ti,hdc2010" },
	{ .compatible = "ti,hdc2080" },
	{ }
	};
	MODULE_DEVICE_TABLE(of, hdc2010_dt_ids);

	static struct i2c_driver hdc2010_driver = {
	.driver = {
	.name = "hdc2010",
	.of_match_table = hdc2010_dt_ids,
	},
	.probe = hdc2010_probe,
	.remove = hdc2010_remove,
	.id_table = hdc2010_id,
	};
	module_i2c_driver(hdc2010_driver);

	MODULE_AUTHOR("Eugene Zaikonnikov <ez@norphonic.com>");
	MODULE_DESCRIPTION("TI HDC2010 humidity and temperature sensor driver");
	MODULE_LICENSE("GPL");