| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * AD714X CapTouch Programmable Controller driver (SPI bus) |
| * |
| * Copyright 2009-2011 Analog Devices Inc. |
| */ |
| |
| #include <linux/input.h> /* BUS_SPI */ |
| #include <linux/module.h> |
| #include <linux/spi/spi.h> |
| #include <linux/pm.h> |
| #include <linux/types.h> |
| #include "ad714x.h" |
| |
| #define AD714x_SPI_CMD_PREFIX 0xE000 /* bits 15:11 */ |
| #define AD714x_SPI_READ BIT(10) |
| |
| static int __maybe_unused ad714x_spi_suspend(struct device *dev) |
| { |
| return ad714x_disable(spi_get_drvdata(to_spi_device(dev))); |
| } |
| |
| static int __maybe_unused ad714x_spi_resume(struct device *dev) |
| { |
| return ad714x_enable(spi_get_drvdata(to_spi_device(dev))); |
| } |
| |
| static SIMPLE_DEV_PM_OPS(ad714x_spi_pm, ad714x_spi_suspend, ad714x_spi_resume); |
| |
| static int ad714x_spi_read(struct ad714x_chip *chip, |
| unsigned short reg, unsigned short *data, size_t len) |
| { |
| struct spi_device *spi = to_spi_device(chip->dev); |
| struct spi_message message; |
| struct spi_transfer xfer[2]; |
| int i; |
| int error; |
| |
| spi_message_init(&message); |
| memset(xfer, 0, sizeof(xfer)); |
| |
| chip->xfer_buf[0] = cpu_to_be16(AD714x_SPI_CMD_PREFIX | |
| AD714x_SPI_READ | reg); |
| xfer[0].tx_buf = &chip->xfer_buf[0]; |
| xfer[0].len = sizeof(chip->xfer_buf[0]); |
| spi_message_add_tail(&xfer[0], &message); |
| |
| xfer[1].rx_buf = &chip->xfer_buf[1]; |
| xfer[1].len = sizeof(chip->xfer_buf[1]) * len; |
| spi_message_add_tail(&xfer[1], &message); |
| |
| error = spi_sync(spi, &message); |
| if (unlikely(error)) { |
| dev_err(chip->dev, "SPI read error: %d\n", error); |
| return error; |
| } |
| |
| for (i = 0; i < len; i++) |
| data[i] = be16_to_cpu(chip->xfer_buf[i + 1]); |
| |
| return 0; |
| } |
| |
| static int ad714x_spi_write(struct ad714x_chip *chip, |
| unsigned short reg, unsigned short data) |
| { |
| struct spi_device *spi = to_spi_device(chip->dev); |
| int error; |
| |
| chip->xfer_buf[0] = cpu_to_be16(AD714x_SPI_CMD_PREFIX | reg); |
| chip->xfer_buf[1] = cpu_to_be16(data); |
| |
| error = spi_write(spi, (u8 *)chip->xfer_buf, |
| 2 * sizeof(*chip->xfer_buf)); |
| if (unlikely(error)) { |
| dev_err(chip->dev, "SPI write error: %d\n", error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int ad714x_spi_probe(struct spi_device *spi) |
| { |
| struct ad714x_chip *chip; |
| int err; |
| |
| spi->bits_per_word = 8; |
| err = spi_setup(spi); |
| if (err < 0) |
| return err; |
| |
| chip = ad714x_probe(&spi->dev, BUS_SPI, spi->irq, |
| ad714x_spi_read, ad714x_spi_write); |
| if (IS_ERR(chip)) |
| return PTR_ERR(chip); |
| |
| spi_set_drvdata(spi, chip); |
| |
| return 0; |
| } |
| |
| static struct spi_driver ad714x_spi_driver = { |
| .driver = { |
| .name = "ad714x_captouch", |
| .pm = &ad714x_spi_pm, |
| }, |
| .probe = ad714x_spi_probe, |
| }; |
| |
| module_spi_driver(ad714x_spi_driver); |
| |
| MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor SPI Bus Driver"); |
| MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); |
| MODULE_LICENSE("GPL"); |